Re: PC Engines APU2B4 betatest: usb install fails
Hi again, I added the following to /boot/loader.conf on the 11-CURRENT usb memstick : usb_quirk_load="YES" boot_multicons="YES" boot_serial="YES" comconsole_speed="115200" console="comconsole,vidconsole" usbconfig -d ugen0.2 add_quirk NO_6_BYTE and that seems to let the kernel mount the miniroot: Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... Root mount waiting for: usbus1 usbus0 uhub0: 4 ports with 4 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: at usbus1 uhub2: on usbus1 uhub2: 4 ports with 4 removable, self powered ugen0.2: at usbus0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:2:0: Attached to scbus2 mountroot: waiting for device /dev/ufs/FreeBSD_Install... (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: Removable Direct Access SPC-4 SCSI device da0: 40.000MB/s transfers da0: 7384MB (15122432 512 byte sectors) da0: quirks=0x2 GEOM: da0: the secondary GPT header is not in the last LBA. No suitable dump device was found. Starting file system checks: /dev/ufs/FreeBSD_Install: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/FreeBSD_Install: clean, 52158 free (174 frags, 6498 blocks, 0.0% fragmentation) Thanks for the suggestions! Cheers, Noth On 08/11/15 10:42, Hans Petter Selasky wrote: On 11/07/15 17:00, Noth wrote: Hi all, I've been directed here by the good folk of #freebsd on Freenode. I'm betatesting the upcoming PC Engines APU2B4 ( http://pcengines.ch/apu2b4.htm ) on various OSes. I tried the memstick installers of both 10.2-RELEASE and the 2nd of November snapshot of 11-CURRENT, and neither work, because the kernel can't mount the miniroot: Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... Root mount waiting for: usbus1 usbus0 uhub0: 4 ports with 4 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: at usbus1 uhub2: on usbus1 uhub2: 4 ports with 4 removable, self powered ugen0.2: at usbus0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:2:0: Attached to scbus2 mountroot: waiting for device /dev/ufs/FreeBSD_Install... (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. Hi, SCSI command #12 is: #define INQUIRY 0x12 That means you might need to set the UQ_MSC_NO_INQUIRY quirk for your device, before it works. In recent 11-current images, this can be done from the loader. See usb_quirk manual page in 11-current. --HPS ___ freebsd-usb@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
PC Engines APU2B4 betatest: usb install fails
Hi all, I've been directed here by the good folk of #freebsd on Freenode. I'm betatesting the upcoming PC Engines APU2B4 ( http://pcengines.ch/apu2b4.htm ) on various OSes. I tried the memstick installers of both 10.2-RELEASE and the 2nd of November snapshot of 11-CURRENT, and neither work, because the kernel can't mount the miniroot: Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... Root mount waiting for: usbus1 usbus0 uhub0: 4 ports with 4 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: at usbus1 uhub2: on usbus1 uhub2: 4 ports with 4 removable, self powered ugen0.2: at usbus0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:2:0: Attached to scbus2 mountroot: waiting for device /dev/ufs/FreeBSD_Install... (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. I've been told this may be due to quirks with the xhci driver, since the external USB ports are both 3.0. However I can succesfully install booting USB and having an SD Card with the same memstick installer image on it inserted into the APU2B4. The installer runs normally and provides a fully functional OS. The dmesg for FreeBSD 10.2 is here: http://pastebin.ca/3238744 and the one for 11-CURRENT is here : http://pastebin.ca/3238637 . Things that aren't working are the cpu thermal sensor (now supported by OpenBSD -CURRENT with a 1 line patch to sys/dev/pci/km.c ) and the AMD CCP crypto chip. Everything else seems functional. I'm ready to provide ssh access to the device to an interested dev to troubleshoot the USB issue. Cheers, Noth ___ freebsd-usb@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
PC Engines APU2B4 betatest: usb install fails
Hi all, I've been directed here by the good folk of #freebsd on Freenode. I'm betatesting the upcoming PC Engines APU2B4 ( http://pcengines.ch/apu2b4.htm ) on various OSes. I tried the memstick installers of both 10.2-RELEASE and the 2nd of November snapshot of 11-CURRENT, and neither work, because the kernel can't mount the miniroot: Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... Root mount waiting for: usbus1 usbus0 uhub0: 4 ports with 4 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: at usbus1 uhub2: on usbus1 uhub2: 4 ports with 4 removable, self powered ugen0.2: at usbus0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:2:0: Attached to scbus2 mountroot: waiting for device /dev/ufs/FreeBSD_Install... (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. I've been told this may be due to quirks with the xhci driver, since the external USB ports are both 3.0. However I can succesfully install booting USB and having an SD Card with the same memstick installer image on it inserted into the APU2B4. The installer runs normally and provides a fully functional OS. The dmesg for FreeBSD 10.2 is here: http://pastebin.ca/3238744 and the one for 11-CURRENT is here : http://pastebin.ca/3238637 . Things that aren't working are the cpu thermal sensor (now supported by OpenBSD -CURRENT with a 1 line patch to sys/dev/pci/km.c ) and the AMD CCP crypto chip. Everything else seems functional. I'm ready to provide ssh access to the device to an interested dev to troubleshoot the USB issue. Cheers, Noth ___ freebsd-usb@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
