Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk
The following reply was made to PR usb/187188; it has been noted by GNATS. From: =?ISO-2022-JP?B?SGlyb28gT25vICgbJEI+LkxuNDJAOBsoQik=?= hiroo.ono+free...@gmail.com To: Hans Petter Selasky h...@bitfrost.no Cc: freebsd-gnats-sub...@freebsd.org Subject: Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk Date: Tue, 4 Mar 2014 21:15:42 +0900 Hi, I have tried with stable r262711, and it is recognized as umodem0, same as with 10.0R. ugen4.3: ELECOM CO., LTD. at usbus4 umodem0: RNDIS COmmunications Control on usbus4 umodem0: data interface 1, has no CM over data, has no break This device is a NAT router, which has a (wired) ethernet interface for the WAN side. For the LAN side, it has a wireless interface and a USB interface. The USB interface has 2 configuration indexes. The config index 0 is recognized as umodem0, and config index 1 is recognized as ue0. For the usual case, I want it to be recognized as ue, which need a quirk to set the config index to 1. The user manual of this device says that, when I plug in the device to windows PC, the driver installation starts, and then it is recognized as an USB ethernet device. So, similar setting should be used for Windows. I do not know what the umodem of config index 0 is for. hrs@ who suggested me to use the quirk speculated that it might be used to update the firmware, but not sure. 2014-03-03 17:16 GMT+09:00 Hans Petter Selasky h...@bitfrost.no: If you upgrade to -stable there should be an RNDIS driver in FreeBSD now. Have you tried that: /boot/kernel/if_urndis.ko http://svnweb.freebsd.org/changeset/base/262362 --HPS ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk
The following reply was made to PR usb/187188; it has been noted by GNATS. From: Hans Petter Selasky h...@bitfrost.no To: hiroo.ono+free...@gmail.com Cc: freebsd-gnats-sub...@freebsd.org Subject: Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk Date: Tue, 04 Mar 2014 13:30:01 +0100 On 03/04/14 13:15, Hiroo Ono (å°éå¯ç) wrote: Hi, I have tried with stable r262711, and it is recognized as umodem0, same as with 10.0R. ugen4.3: ELECOM CO., LTD. at usbus4 umodem0: RNDIS COmmunications Control on usbus4 umodem0: data interface 1, has no CM over data, has no break This device is a NAT router, which has a (wired) ethernet interface for the WAN side. For the LAN side, it has a wireless interface and a USB interface. The USB interface has 2 configuration indexes. The config index 0 is recognized as umodem0, and config index 1 is recognized as ue0. For the usual case, I want it to be recognized as ue, which need a quirk to set the config index to 1. The user manual of this device says that, when I plug in the device to windows PC, the driver installation starts, and then it is recognized as an USB ethernet device. So, similar setting should be used for Windows. I do not know what the umodem of config index 0 is for. hrs@ who suggested me to use the quirk speculated that it might be used to update the firmware, but not sure. 2014-03-03 17:16 GMT+09:00 Hans Petter Selasky h...@bitfrost.no: If you upgrade to -stable there should be an RNDIS driver in FreeBSD now. Have you tried that: /boot/kernel/if_urndis.ko http://svnweb.freebsd.org/changeset/base/262362 --HPS Hi, I understand, sounds good. I thought it was providing a USB RNDIS ethernet interface and not a modem by looking at the USB descriptors you sent. --HPS ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk
The following reply was made to PR usb/187188; it has been noted by GNATS. From: Hans Petter Selasky h...@bitfrost.no To: Hiroo Ono hiroo.ono+free...@gmail.com, freebsd-gnats-sub...@freebsd.org Cc: Subject: Re: usb/187188: [USB][patch] ELECOM WRH-150 needs a quirk Date: Mon, 03 Mar 2014 09:16:12 +0100 On 03/02/14 05:55, Hiroo Ono wrote: Number: 187188 Category: usb Synopsis: [USB][patch] ELECOM WRH-150 needs a quirk Confidential: no Severity: non-critical Priority: low Responsible:freebsd-usb State: open Quarter: Keywords: Date-Required: Class: change-request Submitter-Id: current-users Arrival-Date: Sun Mar 02 05:00:00 UTC 2014 Closed-Date: Last-Modified: Originator: Hiroo Ono Release:10.0R Organization: Environment: Description: Hello, How-To-Repeat: Fix: I have checked it on 10.0-RELEASE. The attached patch is against -current. Patch attached with submission follows: diff -ur usb/quirk/usb_quirk.c usb.mod/quirk/usb_quirk.c --- usb/quirk/usb_quirk.c2014-03-01 05:37:22.0 +0900 +++ usb.mod/quirk/usb_quirk.c2014-03-01 06:12:59.0 +0900 @@ -95,6 +95,7 @@ USB_QUIRK(LOGITECH, UN53B, 0x, 0x, UQ_NO_STRINGS), USB_QUIRK(ELSA, MODEM1, 0x, 0x, UQ_CFG_INDEX_1), USB_QUIRK(PLANEX2, MZKUE150N, 0x, 0x, UQ_CFG_INDEX_1), +USB_QUIRK(REALTEK, RTL8196EU, 0x, 0x, UQ_CFG_INDEX_1), /* Quirks for printer devices */ USB_QUIRK(HP, 895C, 0x, 0x, UQ_BROKEN_BIDIR), USB_QUIRK(HP, 880C, 0x, 0x, UQ_BROKEN_BIDIR), diff -ur usb/usbdevs usb.mod/usbdevs --- usb/usbdevs 2014-03-01 05:43:08.0 +0900 +++ usb.mod/usbdevs 2014-03-01 06:11:30.0 +0900 @@ -3688,6 +3688,7 @@ product REALTEK RTL8188CU_20x817b RTL8188CU product REALTEK RTL81870x8187 RTL8187 Wireless Adapter product REALTEK RTL8187B_0 0x8189 RTL8187B Wireless Adapter +product REALTEK RTL8196EU 0x8196 RTL8196EU product REALTEK RTL8187B_1 0x8197 RTL8187B Wireless Adapter product REALTEK RTL8187B_2 0x8198 RTL8187B Wireless Adapter product REALTEK RTL8188CUS 0x818a RTL8188CUS Hi, If you upgrade to -stable there should be an RNDIS driver in FreeBSD now. Have you tried that: /boot/kernel/if_urndis.ko http://svnweb.freebsd.org/changeset/base/262362 --HPS ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org