Re: N-only access point on FreeBSD 11
pure-n ; HT-greenfield mode. Ie, there's no 11bg interop, everythingo n the channel is 11n, so the PPDU doesn't include the legacy pieces before the HT pieces. Thus the packet timing is slightly shorter. I think though that the savings gained isn't all that much. I'd prefer that we had a cleaner way to configure disabling say, 11b only clients from associating, or easier ways of setting the lowest basic rate(s) to use. -adrian On 18 October 2016 at 23:47, Andriy Voskoboinykwrote: > Wed, 19 Oct 2016 06:13:34 +0300 було написано kbenjamin Coplon > : > > puren? > > >> Hi, I'm trying to configure an ATH3980 as a wireless access point. >> I would like it to operate in N-only mode, but for some reason I can only >> make it work with GN. >> >> Any advice as to how I can make this work would be very helpful. >> Thank You >> Benjamin Sauerhaft Coplon >> >> >> Here is the relevant section of /etc/rc.conf >> >> #Wireless >> wlans_ath0="wlan0" >> create_args_wlan0="wlanmode hostap" >> hostapd_enable="YES" >> ifconfig_wlan0="inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mode 11n" >> >> >> and here is the output of "ifconfig wlan0" >> wlan0: flags=8843 metric 0 mtu >> 1500 >> ether 7c:c3:a1:b3:b3:06 >> nd6 options=29 >> media: IEEEwlan0: >> flags=8843 metric 0 mtu 1500 >> ether 7c:c3:a1:b3:b3:06 >> nd6 options=29 >> media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng >> status: running >> ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid >> 7c:c3:a1:b3:b3:06 >> regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED >> deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode CTS >> ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -dfs >> groups: wlan >> ___ >> freebsd-wireless@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless >> To unsubscribe, send any mail to >> "freebsd-wireless-unsubscr...@freebsd.org" > > ___ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" ___ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
Re: N-only access point on FreeBSD 11
hi, as in, no 11bg rates? -adrian On 18 October 2016 at 20:13, kbenjamin Coplonwrote: > Hi, I'm trying to configure an ATH3980 as a wireless access point. > I would like it to operate in N-only mode, but for some reason I can only > make it work with GN. > > Any advice as to how I can make this work would be very helpful. > Thank You > Benjamin Sauerhaft Coplon > > > Here is the relevant section of /etc/rc.conf > > #Wireless > wlans_ath0="wlan0" > create_args_wlan0="wlanmode hostap" > hostapd_enable="YES" > ifconfig_wlan0="inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mode 11n" > > > and here is the output of "ifconfig wlan0" > wlan0: flags=8843 metric 0 mtu 1500 > ether 7c:c3:a1:b3:b3:06 > nd6 options=29 > media: IEEEwlan0: > flags=8843 metric 0 mtu 1500 > ether 7c:c3:a1:b3:b3:06 > nd6 options=29 > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > status: running > ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid 7c:c3:a1:b3:b3:06 > regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED > deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode CTS > ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -dfs > groups: wlan > ___ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" ___ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
N-only access point on FreeBSD 11
Hi, I'm trying to configure an ATH3980 as a wireless access point. I would like it to operate in N-only mode, but for some reason I can only make it work with GN. Any advice as to how I can make this work would be very helpful. Thank You Benjamin Sauerhaft Coplon Here is the relevant section of /etc/rc.conf #Wireless wlans_ath0="wlan0" create_args_wlan0="wlanmode hostap" hostapd_enable="YES" ifconfig_wlan0="inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mode 11n" and here is the output of "ifconfig wlan0" wlan0: flags=8843metric 0 mtu 1500 ether 7c:c3:a1:b3:b3:06 nd6 options=29 media: IEEEwlan0: flags=8843 metric 0 mtu 1500 ether 7c:c3:a1:b3:b3:06 nd6 options=29 media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng status: running ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid 7c:c3:a1:b3:b3:06 regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -dfs groups: wlan ___ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"