Re: [gentoo-user] Multiple error messages for each keystroke in nano
On Fri, 16 May 2008 at 7:07pm -0700, Bob Young wrote: I'm installing a new Gentoo box, and have the basic system installed ( without X ). The problem began after I completed a successful emerge -DuN world The symptom is: when I start nano, (just nano by itself, not editing a file), several hundred lines similar to the following are spewed to the console: [...] BTW, if I edit with vi.everything works fine, and of course typing at the console works okay as well. What's the output of emerge -vp nano? -- Ian Hilt ian.hilt (at) gmail.com GnuPG key: 0x4AFC1EE3 -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Thunderbird text message display oddities
Hey all, I'm not having any luck figuring out what's going on here, so I hope you can help. I have Thunderbird to display all messages in text, as I prefer that over html. However, some text messages display in a smaller and lighter font than the rest. It's really annoying since one of the reasons for text-only is to have every message the same. I don't see any commonality between the messages that display differently. Every time I think I see one, I find another message with the same feature that displays normally. I see this happen across all my email accounts, and on all mailing lists. Examples (found in gentoo-user) [Multiple error messages for each keystroke in nano] from Bob Young normal [Re: Multiple error messages for each keystroke in nano] from Francesco Talamona smaller, lighter font Ian Hilt's response to [Re: Multiple error messages for each keystroke in nano] normal I've found some 8-bit messages that are normal, some that are not. Ditto for 7-bit and unspecified encodings. I've seen people send both normal and odd messages. Most of my messages are normal, but some are not. Sometimes it seems like odd messages infect responses in the thread, but I've also found cases where it doesn't, or a message in the thread reverts to normal appearance. Any ideas, because I'm completely lost on this one. Google searches just bring up stuff on html messages or changing default Thunderbird settings. PaulNM -- gentoo-user@lists.gentoo.org mailing list
RE: [gentoo-user] Re: Multiple error messages for each keystroke in nano
-Original Message- From: Francesco Talamona [mailto:[EMAIL PROTECTED] Sent: Friday, May 16, 2008 10:46 PM To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] Re: Multiple error messages for each keystroke in nano On Saturday 17 May 2008, Bob Young wrote: Can anybody explain what's going on here, and tell me how I can fix it? BTW, if I edit with vi.everything works fine, and of course typing at the console works okay as well. Just a guess... Did you run etc-update? Ciao Francesco Yes I have run etc-update, there were 32 config files to be processed, and afterward, the problem remains the same Regards, Bob Young -- gentoo-user@lists.gentoo.org mailing list
RE: [gentoo-user] Multiple error messages for each keystroke in nano
-Original Message- From: Ian Hilt [mailto:[EMAIL PROTECTED] Sent: Friday, May 16, 2008 11:03 PM To: Gentoo-user List Subject: Re: [gentoo-user] Multiple error messages for each keystroke in nano On Fri, 16 May 2008 at 7:07pm -0700, Bob Young wrote: I'm installing a new Gentoo box, and have the basic system installed ( without X ). The problem began after I completed a successful emerge -DuN world The symptom is: when I start nano, (just nano by itself, not editing a file), several hundred lines similar to the following are spewed to the console: [...] BTW, if I edit with vi.everything works fine, and of course typing at the console works okay as well. What's the output of emerge -vp nano? [ebuild R ] app-editors/nano-2.1.1 USE=debug ncurses nls spell unicode -justify -minimal -slang 0kb But your question made me wonder about the -DuN world, and in looking at the build log, it appears during the update world, nano was in deed updated from nano-2.0.2 to nano-2.1.1, and, the debug and spell USE flags were flipped. Currently I'm emerging xorg, but after that finishes, I'll first try flipping the debug and spell use flags back and see what that does. Regards, Bob Young -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Multiple error messages for each keystroke in nano
Bob Young writes: Currently I'm emerging xorg, but after that finishes, I'll first try flipping the debug and spell use flags back and see what that does. It will work. I just emerged nano with debug use flag, and get the same errors as you. Should someone file a bug about this? Or is this expected behaviour for the debug use flag? Wonko -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user]
Unsuscribe __ Enviado desde Correo Yahoo! La bandeja de entrada más inteligente.
[gentoo-user] How to set package.use for layman overlays
I've just started to use layman tools and wondered if setting such things as /etc/portage/package.use would still be done in that same place and same way? I want to install an overlay of emacs-cvs but with different use flags I'm following along with the instruction at: http://www.enigmacurry.com/2007/05/24/multi-tty-emacs-on-gentoo-and-ubuntu/ On my laptop I run Gentoo Linux. Getting the latest version of Emacs on Gentoo was a breeze! : * Setup Layman * Add the emacs overlay: sudo layman -a emacs * Add the following USE flags for app-editors/emacs-cvs: sudo flagedit app-editors/emacs-cvs X Xaw3d alsa gif gzip-el jpeg lesstif png sound spell tiff toolkit-scroll-bars xpm -gtk -hesiod -motif -source. * GTK support is explicitly turned off as it causes problems with multi-TTY. This is no biggie for me as I always have (menu-bar-mode -1) and (tool-bar-mode -1) set. * Emerge: sudo emerge emacs-cvs -va * Tell the system to use the new emacs: sudo eselect emacs set emacs-23-multi-tty To get emacs-multitty set up. It isn't really clear what role layman plays in those instructions since the final command is emerge emacs-cvs Or will that automatically use the layman overlays. Or maybe the author assumes I don't already have emacs installed from /usr/portage. I realize this is a little offhanded since its asking advice about 2nd party instructions. But I have no experience whatever with layman or using overlays at all. So thought maybe better to ask here than directly to the author of those instructions. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] How to set package.use for layman overlays
assuming you've got your make.conf setup appropriately, the overlay will take precisidence. PORTDIR_OVERLAY=/usr/portage/local PORTDIR_OVERLAY=/storage/repos/uberpenguin/trunk source /usr/portage/local/layman/make.conf deface On May 17, 2008, at 6:26 AM, [EMAIL PROTECTED] wrote: I've just started to use layman tools and wondered if setting such things as /etc/portage/package.use would still be done in that same place and same way? I want to install an overlay of emacs-cvs but with different use flags I'm following along with the instruction at: http://www.enigmacurry.com/2007/05/24/multi-tty-emacs-on-gentoo-and-ubuntu/ On my laptop I run Gentoo Linux. Getting the latest version of Emacs on Gentoo was a breeze! : * Setup Layman * Add the emacs overlay: sudo layman -a emacs * Add the following USE flags for app-editors/emacs-cvs: sudo flagedit app-editors/emacs-cvs X Xaw3d alsa gif gzip-el jpeg lesstif png sound spell tiff toolkit-scroll-bars xpm -gtk -hesiod -motif -source. * GTK support is explicitly turned off as it causes problems with multi-TTY. This is no biggie for me as I always have (menu-bar-mode -1) and (tool-bar-mode -1) set. * Emerge: sudo emerge emacs-cvs -va * Tell the system to use the new emacs: sudo eselect emacs set emacs-23-multi-tty To get emacs-multitty set up. It isn't really clear what role layman plays in those instructions since the final command is emerge emacs-cvs Or will that automatically use the layman overlays. Or maybe the author assumes I don't already have emacs installed from /usr/portage. I realize this is a little offhanded since its asking advice about 2nd party instructions. But I have no experience whatever with layman or using overlays at all. So thought maybe better to ask here than directly to the author of those instructions. -- gentoo-user@lists.gentoo.org mailing list -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Re: How to set package.use for layman overlays
I've just started to use layman tools and wondered if setting such things as /etc/portage/package.use would still be done in that same place and same way? deface [EMAIL PROTECTED] writes: assuming you've got your make.conf setup appropriately, the overlay will take precisidence. PORTDIR_OVERLAY=/usr/portage/local PORTDIR_OVERLAY=/storage/repos/uberpenguin/trunk source /usr/portage/local/layman/make.conf Sorry it must be going right over my head. I don't see an answer to my question there. How and where to set different use flags for layman as compared to usr/portage? Or lets say I set some USE flags in /usr/portage/local/layman/make.conf Depending on where that line: `source /usr/portage/local/layman/make.conf' is in /etc/make.conf it appears any USE flags set in ..layman/make.conf will either possible overwrite some in /etc/make.conf or the other way round. And the conglomerate will be what emerge runs with. It would also seem that /etc/portage/package.use would be global and include layman... is that right? So again, if one wanted to set some use flags differently for layman packages ... where and how would that be done? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: How to set package.use for layman overlays
On 17 May 2008, at 14:43, [EMAIL PROTECTED] wrote: ... It would also seem that /etc/portage/package.use would be global and include layman... is that right? Yes. So again, if one wanted to set some use flags differently for layman packages ... where and how would that be done? I think that you should use package.use. Stroller. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] How to set package.use for layman overlays
[EMAIL PROTECTED] wrote: I've just started to use layman tools and wondered if setting such things as /etc/portage/package.use would still be done in that same place and same way? I think yes. I want to install an overlay of emacs-cvs but with different use flags I would say there is no problem, because in /etc/portage/package.use you can decide what version with what flags. I'm following along with the instruction at: http://www.enigmacurry.com/2007/05/24/multi-tty-emacs-on-gentoo-and-ubuntu/ On my laptop I run Gentoo Linux. Getting the latest version of Emacs on Gentoo was a breeze! : * Setup Layman * Add the emacs overlay: sudo layman -a emacs * Add the following USE flags for app-editors/emacs-cvs: sudo flagedit app-editors/emacs-cvs X Xaw3d alsa gif gzip-el jpeg lesstif png sound spell tiff toolkit-scroll-bars xpm -gtk -hesiod -motif -source. * GTK support is explicitly turned off as it causes problems with multi-TTY. This is no biggie for me as I always have (menu-bar-mode -1) and (tool-bar-mode -1) set. * Emerge: sudo emerge emacs-cvs -va * Tell the system to use the new emacs: sudo eselect emacs set emacs-23-multi-tty To get emacs-multitty set up. It isn't really clear what role layman plays in those instructions since the final command is emerge emacs-cvs That's, so far I that understand, the advantage for using overlays. Or will that automatically use the layman overlays. Yes. Because emacs-cvs is in the portage-tree but masked. Or maybe the author assumes I don't already have emacs installed from /usr/portage. If you want to install emacs-cvs from the portage tree, you have to unmask this package: $ emerge -atv emacs-cvs These are the packages that would be merged, in reverse order: Calculating dependencies / !!! All ebuilds that could satisfy app-editors/emacs-cvs have been masked. !!! One of the following masked packages is required to complete your request: - app-editors/emacs-cvs-23.0. (masked by: ~x86 keyword) - app-editors/emacs-cvs-23.0.50_pre20080201 (masked by: ~x86 keyword) - app-editors/emacs-cvs-22.2. (masked by: ~x86 keyword) For more information, see MASKED PACKAGES section in the emerge man page or refer to the Gentoo Handbook. I realize this is a little offhanded since its asking advice about 2nd party instructions. But I have no experience whatever with layman or using overlays at all. So thought maybe better to ask here than directly to the author of those instructions. That's the way I see it. W. Canis signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] Re: How to set package.use for layman overlays
So again, if one wanted to set some use flags differently for layman packages ... where and how would that be done? I think that you should use package.use. Yes. According to Strollers post this is done by an package.use file in /usr/portage/layman I think. Regards, acm. signature.asc Description: OpenPGP digital signature
RE: [gentoo-user] Multiple error messages for each keystroke in nano
-Original Message- From: Alex Schuster [mailto:[EMAIL PROTECTED] Sent: Saturday, May 17, 2008 2:20 AM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] Multiple error messages for each keystroke in nano Bob Young writes: Currently I'm emerging xorg, but after that finishes, I'll first try flipping the debug and spell use flags back and see what that does. It will work. I just emerged nano with debug use flag, and get the same errors as you. Should someone file a bug about this? Or is this expected behaviour for the debug use flag? Wonko Yes it did, I re-emerged nano with -debug and the problem went away. Now I have the same question, is this a bug or not? Regards, Bob Young -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Problem upgrading kernel from 2.6.25.1to 2.6.26_rc1
On Wed, 14 May 2008 13:54:09 +0200 Marko Kocić wrote: 2008/5/14 Alan McKinnon [EMAIL PROTECTED]: On Wednesday 14 May 2008, Marko Kocić wrote: Perhaps the output of dmesg and the relevant bits of messages from the init process will be required here Yes, I'll have to digg more to fix this. I just hoped that there is some easy/fast solution that I didn't know of :( It is going to be a fun week ;(, hopefully not the weekend ;) Here's my advice: start over :-) Using a .24 config works to build .25 - I have done it, so I think something just went bellyup on yours. It worked for me too. I had similar problem when upgrading from 25 to 25.1, but it seems like it was enough to fast scan through menus in menuconfig, change nothing, just save config, and rebuild. [Error decoding BASE64] Given the old and new .config files you can diff them to see what's different. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Re: How to set package.use for layman overlays
Alexander Meinke [EMAIL PROTECTED] writes: So again, if one wanted to set some use flags differently for layman packages ... where and how would that be done? I think that you should use package.use. Yes. According to Strollers post this is done by an package.use file in /usr/portage/layman I think. What post?... do have the Message-ID. Are you sure about the location? -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] non-root crontab failure (permissions issue?)
I'm having trouble getting cron to be usable by normal users. I'm running vixie-cron 4.1-r10 on Gentoo Linux. My user is a member of both cron and crontab groups (being unsure which I needed, but speculating the former). There is no cron.allow, and an empty cron.deny file in /etc. Every time I try crontab -e as my user, I get this: Code: ~~~ no crontab for user - using an empty one crontab: installing new crontab chown: Operation not permitted crontab: edits left in /tmp/crontab.sXePXF ~~~ Naturally, I'm guessing permissions problems. Here are the permissions: ~~~ host2 spool # cd /var/spool host2 spool # ls -alR cron/ cron/: total 16 drwxr-x--- 4 root cron4096 Mar 6 17:16 . drwxr-xr-x 6 root root4096 Apr 13 16:02 .. -rw-r--r-- 1 root root 0 Mar 6 17:16 .keep_sys-process_cronbase-0 drwx-wx--T 2 root crontab 4096 May 16 14:39 crontabs drwxr-x--- 2 root root4096 Mar 6 17:16 lastrun cron/crontabs: total 12 drwx-wx--T 2 root crontab 4096 May 16 14:39 . drwxr-x--- 4 root cron4096 Mar 6 17:16 .. -rw-r--r-- 1 root crontab0 Mar 6 17:16 .keep_sys-process_vixie-cron-0 -rw--- 1 root crontab 328 Apr 27 12:25 root cron/lastrun: total 8 drwxr-x--- 2 root root 4096 Mar 6 17:16 . drwxr-x--- 4 root cron 4096 Mar 6 17:16 .. -rw-r--r-- 1 root root0 Mar 6 17:16 .keep_sys-process_cronbase-0 host2 spool # ~~~ crontab -e does not error out when run as root. crontab -u myuser -e, when run as root, does create a crontab, which appears to be owned by root, grouped by root, and with rw permissions for owner only. How can I fix this? Thanks. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] non-root crontab failure (permissions issue?)
user in cron group? King Spook wrote: I'm having trouble getting cron to be usable by normal users. I'm running vixie-cron 4.1-r10 on Gentoo Linux. My user is a member of both cron and crontab groups (being unsure which I needed, but speculating the former). There is no cron.allow, and an empty cron.deny file in /etc. Every time I try crontab -e as my user, I get this: Code: ~~~ no crontab for user - using an empty one crontab: installing new crontab chown: Operation not permitted crontab: edits left in /tmp/crontab.sXePXF ~~~ Naturally, I'm guessing permissions problems. Here are the permissions: ~~~ host2 spool # cd /var/spool host2 spool # ls -alR cron/ cron/: total 16 drwxr-x--- 4 root cron4096 Mar 6 17:16 . drwxr-xr-x 6 root root4096 Apr 13 16:02 .. -rw-r--r-- 1 root root 0 Mar 6 17:16 .keep_sys-process_cronbase-0 drwx-wx--T 2 root crontab 4096 May 16 14:39 crontabs drwxr-x--- 2 root root4096 Mar 6 17:16 lastrun cron/crontabs: total 12 drwx-wx--T 2 root crontab 4096 May 16 14:39 . drwxr-x--- 4 root cron4096 Mar 6 17:16 .. -rw-r--r-- 1 root crontab0 Mar 6 17:16 .keep_sys-process_vixie-cron-0 -rw--- 1 root crontab 328 Apr 27 12:25 root cron/lastrun: total 8 drwxr-x--- 2 root root 4096 Mar 6 17:16 . drwxr-x--- 4 root cron 4096 Mar 6 17:16 .. -rw-r--r-- 1 root root0 Mar 6 17:16 .keep_sys-process_cronbase-0 host2 spool # ~~~ crontab -e does not error out when run as root. crontab -u myuser -e, when run as root, does create a crontab, which appears to be owned by root, grouped by root, and with rw permissions for owner only. How can I fix this? Thanks. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] non-root crontab failure (permissions issue?)
nm, just read that part .. haa King Spook wrote: I'm having trouble getting cron to be usable by normal users. I'm running vixie-cron 4.1-r10 on Gentoo Linux. My user is a member of both cron and crontab groups (being unsure which I needed, but speculating the former). There is no cron.allow, and an empty cron.deny file in /etc. Every time I try crontab -e as my user, I get this: Code: ~~~ no crontab for user - using an empty one crontab: installing new crontab chown: Operation not permitted crontab: edits left in /tmp/crontab.sXePXF ~~~ Naturally, I'm guessing permissions problems. Here are the permissions: ~~~ host2 spool # cd /var/spool host2 spool # ls -alR cron/ cron/: total 16 drwxr-x--- 4 root cron4096 Mar 6 17:16 . drwxr-xr-x 6 root root4096 Apr 13 16:02 .. -rw-r--r-- 1 root root 0 Mar 6 17:16 .keep_sys-process_cronbase-0 drwx-wx--T 2 root crontab 4096 May 16 14:39 crontabs drwxr-x--- 2 root root4096 Mar 6 17:16 lastrun cron/crontabs: total 12 drwx-wx--T 2 root crontab 4096 May 16 14:39 . drwxr-x--- 4 root cron4096 Mar 6 17:16 .. -rw-r--r-- 1 root crontab0 Mar 6 17:16 .keep_sys-process_vixie-cron-0 -rw--- 1 root crontab 328 Apr 27 12:25 root cron/lastrun: total 8 drwxr-x--- 2 root root 4096 Mar 6 17:16 . drwxr-x--- 4 root cron 4096 Mar 6 17:16 .. -rw-r--r-- 1 root root0 Mar 6 17:16 .keep_sys-process_cronbase-0 host2 spool # ~~~ crontab -e does not error out when run as root. crontab -u myuser -e, when run as root, does create a crontab, which appears to be owned by root, grouped by root, and with rw permissions for owner only. How can I fix this? Thanks. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] emerge emacs-cvs fails on a fairly minimal install
I want to get emacs-cvs installed on a machine with no X or xorg stuff installed. I want version 23 for the newly merged multi-tty functionality. (a way to connect to a running emacs remotely) When I try to emerge it: [...] xfaces.c:(.text+0x42a6): undefined reference to `FONT_WEIGHT_NAME_NUMERIC' xfaces.c:(.text+0x42bb): undefined reference to `FONT_WEIGHT_NAME_NUMERIC' print.o: In function `print_object': print.c:(.text+0x2dc2): undefined reference to `font_style_symbolic' collect2: ld returned 1 exit status make[2]: *** [temacs] Error 1 make[2]: Leaving directory `/var/tmp/portage/app-editors/emacs-cvs-23.0./work/emacs/src' make[1]: *** [bootstrap-build] Error 2 make[1]: Leaving directory `/var/tmp/portage/app-editors/emacs-cvs-23.0./work/emacs' make: *** [bootstrap] Error 2 * * ERROR: app-editors/emacs-cvs-23.0. failed. * Call stack: * ebuild.sh, line 49: Called src_compile * environment, line 3373: Called die * The specific snippet of code: * emake CC=$(tc-getCC) bootstrap || die make bootstrap failed * The die message: * make bootstrap failed [...] Is that failure related to not having X support libs installed? Or is really a compiler problem? The use flags were: [ebuild N] app-editors/emacs-cvs-23.0. USE=gpm xpm -X -Xaw3d -alsa -dbus -gif -gtk -gzip-el -hesiod -jpeg -kerberos -m17n-lib -motif -png -sound -source -spell -svg -tiff -toolkit-scroll-bars -xft Do I need to change the use flags somehow? -- gentoo-user@lists.gentoo.org mailing list