Re: [gentoo-user] Mailing list and PGP/MIME
On Fri, 30 May 2008 10:39:35 +0900 Paul Sebastian Ziegler [EMAIL PROTECTED] wrote: Glad to hear you didn't mind, Daniel. Actually, I've enjoyed it! :) It was very crazy to see my name under something I've never said. The lack of control just rushed my adrenaline even though I was expecting something like that. Thanks! Yes, you traced me correctly. And as Rob already noticed, that could be circumvented by spoofing the header a little more. True. It wouldn't be so hard to send the message from another place. Also you were correct to notice, that the receiving server has the last word - however many servers today do -not- perform reverse DNS lookups. You can basically put into the EHLO message whatever you want and the receiving server will buy it. So with some effort we could make it look as if the message was actually received from fg-out-1718.google.com. At least as long as pidgeon.gentoo.org doesn't do reverse DNS lookups, which frankly I didn't check. :) --Paul Unfortunately many times one cannot control the reverse records, because the IP address pool belongs to the ISP. Nevertheless the SMTP server logs the IP address which the message came from. It doesn't matter if the message would be bounced or accepted because of the (in)correct reverse resolving. Additionally there's the SPF [1] and I believe the email system at gentoo.org uses it. If that's so and my poor abused address :) was at a domain with SPF record imposing fail policy, that message shouldn't be accepted at all. At best you'd get something like: Domain of [EMAIL PROTECTED] does not designate 192.0.2.25 as permitted sender. Anyways the right thing to do is to ban the IP address which the offencive message came from, not the email address. So, signatures don't come to play here. [1] http://www.openspf.org/ -- Best regards, Daniel -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Wireless problem
Hi, Power saving, see man iwconfig (but I can't say more, I never touched it) Bye, Jil Rev. Ferris a écrit : Hi! I have a wireless problem. I bought yesterday a Zyxel G202 USB stick and I attack it of my workstation. This hardware is supported from zd1211rw driver. I set all parameters of my network and I started it. It works fine, pretty signal quality, good speed, etc. After some quiet time, from my network monitor I noticed a lost in the connection. Now, if I restart the connection it works fine, but after a X time it disconnects again. I don't find any message on dmesg or /var/log/messages and for that reason I have no idea how I can solve the problem. I think it is something correlates with energy management. Any idea? Thanks, Luigi -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] K3b complains about my locale
On Thu, May 29, 2008 at 4:09 PM, Daniel Pielmeier [EMAIL PROTECTED] wrote: Kevin O'Gorman schrieb: On Thu, May 29, 2008 at 3:18 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: On Thu, May 29, 2008 at 2:29 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: When I crank up K3b, it complains about my setup, with the message System locale charset is ANSI_X3.4-1968 Your system's locale charset (i.e. the charset used to encode filenames) is set to ANSI_X3.4-1968. It is highly unlikely that this has been done intentionally. Most likely the locale is not set at all. An invalid setting will result in problems when creating data projects. Solution: To properly set the locale charset make sure the LC_* environment variables are set. Normally the distribution setup tools take care of this. It is correct that this is not intentional (it does seem antique). I have configured .mybashrc to set my LANG to en_US, but nothing beyond that. What distribution setup tools is it referring to, so that I can correct this on gentoo? What have you set up in your /etc/locale.gen ? I won't take credit for setting this up, because I don't think I did. On the other hand, I've had occasion to internationalize a web page to dutch and polish, which appear in the list. So I dunno where it came from. But here's what's there: # /etc/locale.gen: list all of the locales you want to have on your system # # The format of each line: # locale charmap # # Where locale is a locale located in /usr/share/i18n/locales/ and # where charmap is a charmap located in /usr/share/i18n/charmaps/. # # All blank lines and lines starting with # are ignored. # # For the default list of supported combinations, see the file: # /usr/share/i18n/SUPPORTED # # Whenever glibc is emerged, the locales listed here will be automatically # rebuilt for you. After updating this file, you can simply run `locale-gen` # yourself instead of re-emerging glibc. en_US ISO-8859-1 en_US.UTF-8 UTF-8 #ja_JP.EUC-JP EUC-JP #ja_JP.UTF-8 UTF-8 #ja_JP EUC-JP #en_HK ISO-8859-1 #en_PH ISO-8859-1 #de_DE ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 es_MX ISO-8859-1 #fa_IR UTF-8 fr_FR ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 #it_IT ISO-8859-1 pl_PL ISO-8859-15 This looks fine. If when you run $ locale you get a list with LANG=en_US but further down LC_ALL= (blank), then set export LC_ALL=xxx in your .bashrc to whatever you want your locale set to. Halfway there. I did that, and now locale looks like [EMAIL PROTECTED] ~ $ locale LANG=en_US LC_CTYPE=en_US LC_NUMERIC=en_US LC_TIME=en_US LC_COLLATE=en_US LC_MONETARY=en_US LC_MESSAGES=en_US LC_PAPER=en_US LC_NAME=en_US LC_ADDRESS=en_US LC_TELEPHONE=en_US LC_MEASUREMENT=en_US LC_IDENTIFICATION=en_US LC_ALL=en_US [EMAIL PROTECTED] ~ $ However, when I start k3b from the KDE menus, it still complains. On the other hand, if I start k3b from the shell that gives the locale results above, it starts clean. So the issue seems to be that I need to inform KDE about the locale. I did a fresh boot, and that did not help, so I wonder if .mybashrc is the correct place to do this. try /etc/env.d/02locale LANG=en_US LC_ALL=en_US For details take a look at the localisation guide. http://www.gentoo.org/doc/en/guide-localization.xml -- gentoo-user@lists.gentoo.org mailing list The file /etc/env.d/02locale does not exist on my system. I can create it, of course, but I suspect I may be missing something. Is there a package I should emerge? ++ kevin -- Kevin O'Gorman, PhD
Re: [gentoo-user] K3b complains about my locale
if theres no file 02local you have to create it and set your locales there. after donig this run env-update regards Dominik On Fri, May 30, 2008 at 3:34 PM, Kevin O'Gorman [EMAIL PROTECTED] wrote: On Thu, May 29, 2008 at 4:09 PM, Daniel Pielmeier [EMAIL PROTECTED] wrote: Kevin O'Gorman schrieb: On Thu, May 29, 2008 at 3:18 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: On Thu, May 29, 2008 at 2:29 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: When I crank up K3b, it complains about my setup, with the message System locale charset is ANSI_X3.4-1968 Your system's locale charset (i.e. the charset used to encode filenames) is set to ANSI_X3.4-1968. It is highly unlikely that this has been done intentionally. Most likely the locale is not set at all. An invalid setting will result in problems when creating data projects. Solution: To properly set the locale charset make sure the LC_* environment variables are set. Normally the distribution setup tools take care of this. It is correct that this is not intentional (it does seem antique). I have configured .mybashrc to set my LANG to en_US, but nothing beyond that. What distribution setup tools is it referring to, so that I can correct this on gentoo? What have you set up in your /etc/locale.gen ? I won't take credit for setting this up, because I don't think I did. On the other hand, I've had occasion to internationalize a web page to dutch and polish, which appear in the list. So I dunno where it came from. But here's what's there: # /etc/locale.gen: list all of the locales you want to have on your system # # The format of each line: # locale charmap # # Where locale is a locale located in /usr/share/i18n/locales/ and # where charmap is a charmap located in /usr/share/i18n/charmaps/. # # All blank lines and lines starting with # are ignored. # # For the default list of supported combinations, see the file: # /usr/share/i18n/SUPPORTED # # Whenever glibc is emerged, the locales listed here will be automatically # rebuilt for you. After updating this file, you can simply run `locale-gen` # yourself instead of re-emerging glibc. en_US ISO-8859-1 en_US.UTF-8 UTF-8 #ja_JP.EUC-JP EUC-JP #ja_JP.UTF-8 UTF-8 #ja_JP EUC-JP #en_HK ISO-8859-1 #en_PH ISO-8859-1 #de_DE ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 es_MX ISO-8859-1 #fa_IR UTF-8 fr_FR ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 #it_IT ISO-8859-1 pl_PL ISO-8859-15 This looks fine. If when you run $ locale you get a list with LANG=en_US but further down LC_ALL= (blank), then set export LC_ALL=xxx in your .bashrc to whatever you want your locale set to. Halfway there. I did that, and now locale looks like [EMAIL PROTECTED] ~ $ locale LANG=en_US LC_CTYPE=en_US LC_NUMERIC=en_US LC_TIME=en_US LC_COLLATE=en_US LC_MONETARY=en_US LC_MESSAGES=en_US LC_PAPER=en_US LC_NAME=en_US LC_ADDRESS=en_US LC_TELEPHONE=en_US LC_MEASUREMENT=en_US LC_IDENTIFICATION=en_US LC_ALL=en_US [EMAIL PROTECTED] ~ $ However, when I start k3b from the KDE menus, it still complains. On the other hand, if I start k3b from the shell that gives the locale results above, it starts clean. So the issue seems to be that I need to inform KDE about the locale. I did a fresh boot, and that did not help, so I wonder if .mybashrc is the correct place to do this. try /etc/env.d/02locale LANG=en_US LC_ALL=en_US For details take a look at the localisation guide. http://www.gentoo.org/doc/en/guide-localization.xml -- gentoo-user@lists.gentoo.org mailing list The file /etc/env.d/02locale does not exist on my system. I can create it, of course, but I suspect I may be missing something. Is there a package I should emerge? ++ kevin -- Kevin O'Gorman, PhD
Re: [gentoo-user] Mailing list and PGP/MIME
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Daniel Iliev wrote: Come ooon! :) The whole bet thing was of course a joke. What I had in mind is that you'd have to hack Gmail which I believe won't classify as relatively easy. Not to mention that even just for proof of concept this would be illegal, so I'd never expect you to do it. No problem. :-) Alright, the most important thing in this discussion appears that we all agree that signing mails to ML or not, either way there's no harm. So, I think we'd better stop at this point and let it go. Agreed? I have no problem with that. :-) -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhAIVgACgkQKT9zBKF0twVWLQCfWd/4i0XgyOTuHuJIAxv8pq8D Ug0An0q7/0FB909Ox7SMu3qWAtndAQbL =6TZf -END PGP SIGNATURE- -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Mailing list and PGP/MIME
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Daniel Iliev wrote: Unfortunately many times one cannot control the reverse records, because the IP address pool belongs to the ISP. Nevertheless the SMTP server logs the IP address which the message came from. It doesn't matter if the message would be bounced or accepted because of the (in)correct reverse resolving. Additionally there's the SPF [1] and I believe the email system at gentoo.org uses it. If that's so and my poor abused address :) was at a domain with SPF record imposing fail policy, that message shouldn't be accepted at all. At best you'd get something like: Domain of [EMAIL PROTECTED] does not designate 192.0.2.25 as permitted sender. Anyways the right thing to do is to ban the IP address which the offencive message came from, not the email address. So, signatures don't come to play here. [1] http://www.openspf.org/ But you see it isn't that difficulty to abuse a email address. That what happened to your address and what P. S. Ziegler described was what I meant with relatively easy. ;-) Have fun, W. Canis :-) -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhAIscACgkQKT9zBKF0twXUNACfdOnkosO99d8JqV0+JsYynrhP 0hkAoJgZzmfQAMcTpg8hehBhbZ/frb4M =XD5e -END PGP SIGNATURE- -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Mailing list and PGP/MIME
On Fri, 30 May 2008 17:52:41 +0200 Wolf Canis [EMAIL PROTECTED] wrote: But you see it isn't that difficulty to abuse a email address. That what happened to your address and what P. S. Ziegler described was what I meant with relatively easy. ;-) Have fun, W. Canis :-) Alright, I give up! (but ain't gonna sign my posts :P) See you guys next week and have a nice weekend! :) -- Best regards, Daniel -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] quickcam pro 4000
Hello, I have this usb camera installed (or so I think): lsbus: Bus 004 Device 003: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000 /etc/udev/rules.d/40-video.rules has this entry: KERNEL==video[0-9]*, NAME=v4l/video%n, SYMLINK+=%k, GROUP=video So what is a good application to view the live video with? James -- gentoo-user@lists.gentoo.org mailing list
RE: [gentoo-user] K3b complains about my locale
From: Dominik Zajac [mailto:[EMAIL PROTECTED] Sent: Friday, May 30, 2008 10:24 AM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] K3b complains about my locale if theres no file 02local you have to create it and set your locales there. after donig this run env-update regards Dominik On Fri, May 30, 2008 at 3:34 PM, Kevin O'Gorman [EMAIL PROTECTED] wrote: On Thu, May 29, 2008 at 4:09 PM, Daniel Pielmeier [EMAIL PROTECTED] wrote: Kevin O'Gorman schrieb: On Thu, May 29, 2008 at 3:18 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: On Thu, May 29, 2008 at 2:29 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: When I crank up K3b, it complains about my setup, with the message System locale charset is ANSI_X3.4-1968 Your system's locale charset (i.e. the charset used to encode filenames) is set to ANSI_X3.4-1968. It is highly unlikely that this has been done intentionally. Most likely the locale is not set at all. An invalid setting will result in problems when creating data projects. Solution: To properly set the locale charset make sure the LC_* environment variables are set. Normally the distribution setup tools take care of this. It is correct that this is not intentional (it does seem antique). I have configured .mybashrc to set my LANG to en_US, but nothing beyond that. What distribution setup tools is it referring to, so that I can correct this on gentoo? What have you set up in your /etc/locale.gen ? I won't take credit for setting this up, because I don't think I did. On the other hand, I've had occasion to internationalize a web page to dutch and polish, which appear in the list. So I dunno where it came from. But here's what's there: # /etc/locale.gen: list all of the locales you want to have on your system # # The format of each line: # locale charmap # # Where locale is a locale located in /usr/share/i18n/locales/ and # where charmap is a charmap located in /usr/share/i18n/charmaps/. # # All blank lines and lines starting with # are ignored. # # For the default list of supported combinations, see the file: # /usr/share/i18n/SUPPORTED # # Whenever glibc is emerged, the locales listed here will be automatically # rebuilt for you. After updating this file, you can simply run `locale-gen` # yourself instead of re-emerging glibc. en_US ISO-8859-1 en_US.UTF-8 UTF-8 #ja_JP.EUC-JP EUC-JP #ja_JP.UTF-8 UTF-8 #ja_JP EUC-JP #en_HK ISO-8859-1 #en_PH ISO-8859-1 #de_DE ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 es_MX ISO-8859-1 #fa_IR UTF-8 fr_FR ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 #it_IT ISO-8859-1 pl_PL ISO-8859-15 This looks fine. If when you run $ locale you get a list with LANG=en_US but further down LC_ALL= (blank), then set export LC_ALL=xxx in your .bashrc to whatever you want your locale set to. Halfway there. I did that, and now locale looks like [EMAIL PROTECTED] ~ $ locale LANG=en_US LC_CTYPE=en_US LC_NUMERIC=en_US LC_TIME=en_US LC_COLLATE=en_US LC_MONETARY=en_US LC_MESSAGES=en_US LC_PAPER=en_US LC_NAME=en_US LC_ADDRESS=en_US LC_TELEPHONE=en_US LC_MEASUREMENT=en_US LC_IDENTIFICATION=en_US LC_ALL=en_US [EMAIL PROTECTED] ~ $ However, when I start k3b from the KDE menus, it still complains. On the other hand, if I start k3b from the shell that gives the locale results above, it starts clean. So the issue seems to be that I need to inform KDE about the locale. I did a fresh boot, and that did not help, so I wonder if .mybashrc is the correct place to do this. try /etc/env.d/02locale LANG=en_US LC_ALL=en_US For details take a look at the localisation guide. http://www.gentoo.org/doc/en/guide-localization.xml -- gentoo-user@lists.gentoo.org mailing list The file /etc/env.d/02locale does not exist on my system. I can create it, of course, but I suspect I may be missing something. Is there a package I should emerge? ++ kevin -- Kevin O'Gorman, PhD I guarantee that those instructions will work for you. Check to see if you have 02locale in your /etc/env.d/ dir. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Java default Swing stile
Hi list! I've recently started both programming and using some Java applications (not that I would have a choice ...). Well, anyway, as it seems the default style for Swing is set to Metal, Java's own rather ugly and non-conforming variant. Is there a way to set this to GTK, QT or whatever I have here other than through the functionality in the programs themeselve? Or is it really the Java-VM who's dictating what's the default for a given platform (Windows/Linux)? Thanks in advance! Florian Philipp signature.asc Description: PGP signature
Re: [gentoo-user] Java default Swing stile
On Fri, May 30, 2008 at 9:20 PM, Florian Philipp [EMAIL PROTECTED] wrote: Hi list! I've recently started both programming and using some Java applications (not that I would have a choice ...). Well, anyway, as it seems the default style for Swing is set to Metal, Java's own rather ugly and non-conforming variant. Is there a way to set this to GTK, QT or whatever I have here other than through the functionality in the programs themeselve? Or is it really the Java-VM who's dictating what's the default for a given platform (Windows/Linux)? Thanks in advance! Florian Philipp I think the JVM defaults to motif, it's supported on most platforms. I found this on the web: start-quote Yes, it is possible. In the ~/java/lib dir, create / edit a file with name swing.proprierties: Change the line: swing.defaultlaf=com.sun.java.swing.plaf.CURRENTLO OKANDFEEL to swing.defaultlaf=com.sun.java.swing.plaf.gtk.GTKLo okAndFeel /end-quote Don't know if it works though? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Wireless problem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Unfortunately this card doesn't accept that command: iwconfig eth2 power off Error for wireless request Set Power Management (8B2C) : SET failed on device eth2 ; Operation not supported. Any other suggestion? Thanks, Luigi Alle venerdì 30 maggio 2008, Jil Larner ha scritto: Hi, Power saving, see man iwconfig (but I can't say more, I never touched it) Bye, Jil -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAkhAYD0ACgkQYoDKzgS2pLPSIgCgjCVq/FaNECUlrDkuG9j+qMLi D0gAoIs/Uz8/aicBHsCkIbeHJCgh3Skz =DDrb -END PGP SIGNATURE- -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] glsa-check question
Hello. Do you know why glsa-check tells me to update sun-jdk, even if it's alredy updated ? # glsa-check -p $(glsa-check -t all) This system is affected by the following GLSAs: Checking GLSA 200705-23 The following updates will be performed for this GLSA: dev-java/sun-jdk-1.5.0.15 (1.6.0.06) Checking GLSA 200702-07 The following updates will be performed for this GLSA: dev-java/sun-jdk-1.5.0.15 (1.6.0.06) Checking GLSA 200701-15 The following updates will be performed for this GLSA: dev-java/sun-jdk-1.5.0.15 (1.6.0.06) On my system there are installed sun-jdk-1.6.0.06 and sun-jdk-1.4.2.17 (required by eclipse-sdk-3.2), but not sun-jdk-1.5.0.15. Thanks, Marco.
Re: [gentoo-user] K3b complains about my locale
On Fri, May 30, 2008 at 12:06 PM, Marzan, Richard non Unisys [EMAIL PROTECTED] wrote: From: Dominik Zajac [mailto:[EMAIL PROTECTED] Sent: Friday, May 30, 2008 10:24 AM To: gentoo-user@lists.gentoo.org Subject: Re: [gentoo-user] K3b complains about my locale if theres no file 02local you have to create it and set your locales there. after donig this run env-update regards Dominik On Fri, May 30, 2008 at 3:34 PM, Kevin O'Gorman [EMAIL PROTECTED] wrote: On Thu, May 29, 2008 at 4:09 PM, Daniel Pielmeier [EMAIL PROTECTED] wrote: Kevin O'Gorman schrieb: On Thu, May 29, 2008 at 3:18 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: On Thu, May 29, 2008 at 2:29 PM, Mick [EMAIL PROTECTED] wrote: On Thursday 29 May 2008, Kevin O'Gorman wrote: When I crank up K3b, it complains about my setup, with the message System locale charset is ANSI_X3.4-1968 Your system's locale charset (i.e. the charset used to encode filenames) is set to ANSI_X3.4-1968. It is highly unlikely that this has been done intentionally. Most likely the locale is not set at all. An invalid setting will result in problems when creating data projects. Solution: To properly set the locale charset make sure the LC_* environment variables are set. Normally the distribution setup tools take care of this. It is correct that this is not intentional (it does seem antique). I have configured .mybashrc to set my LANG to en_US, but nothing beyond that. What distribution setup tools is it referring to, so that I can correct this on gentoo? What have you set up in your /etc/locale.gen ? I won't take credit for setting this up, because I don't think I did. On the other hand, I've had occasion to internationalize a web page to dutch and polish, which appear in the list. So I dunno where it came from. But here's what's there: # /etc/locale.gen: list all of the locales you want to have on your system # # The format of each line: # locale charmap # # Where locale is a locale located in /usr/share/i18n/locales/ and # where charmap is a charmap located in /usr/share/i18n/charmaps/. # # All blank lines and lines starting with # are ignored. # # For the default list of supported combinations, see the file: # /usr/share/i18n/SUPPORTED # # Whenever glibc is emerged, the locales listed here will be automatically # rebuilt for you. After updating this file, you can simply run `locale-gen` # yourself instead of re-emerging glibc. en_US ISO-8859-1 en_US.UTF-8 UTF-8 #ja_JP.EUC-JP EUC-JP #ja_JP.UTF-8 UTF-8 #ja_JP EUC-JP #en_HK ISO-8859-1 #en_PH ISO-8859-1 #de_DE ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 es_MX ISO-8859-1 #fa_IR UTF-8 fr_FR ISO-8859-1 [EMAIL PROTECTED] ISO-8859-15 #it_IT ISO-8859-1 pl_PL ISO-8859-15 This looks fine. If when you run $ locale you get a list with LANG=en_US but further down LC_ALL= (blank), then set export LC_ALL=xxx in your .bashrc to whatever you want your locale set to. Halfway there. I did that, and now locale looks like [EMAIL PROTECTED] ~ $ locale LANG=en_US LC_CTYPE=en_US LC_NUMERIC=en_US LC_TIME=en_US LC_COLLATE=en_US LC_MONETARY=en_US LC_MESSAGES=en_US LC_PAPER=en_US LC_NAME=en_US LC_ADDRESS=en_US LC_TELEPHONE=en_US LC_MEASUREMENT=en_US LC_IDENTIFICATION=en_US LC_ALL=en_US [EMAIL PROTECTED] ~ $ However, when I start k3b from the KDE menus, it still complains. On the other hand, if I start k3b from the shell that gives the locale results above, it starts clean. So the issue seems to be that I need to inform KDE about the locale. I did a fresh boot, and that did not help, so I wonder if .mybashrc is the correct place to do this. try /etc/env.d/02locale LANG=en_US LC_ALL=en_US For details take a look at the localisation guide. http://www.gentoo.org/doc/en/guide-localization.xml -- gentoo-user@lists.gentoo.org mailing list The file /etc/env.d/02locale does not exist on my system. I can create it, of course, but I suspect I may be missing something. Is there a package I should emerge? ++ kevin -- Kevin O'Gorman, PhD I guarantee that those instructions will work for you. Check to see if you have 02locale in your /etc/env.d/ dir. -- gentoo-user@lists.gentoo.org mailing list It looks like I'd collect on that guarantee. I did not have 02locale in /etc/env.d/dir, although there was a lot of other stuff in that directory. I added the two lines. I ran env-update I ctl-alt-backspace restarted my KDE/X system I clicked k3b on the Multimedia submenu It barked at me again about x3.4-1968. So something isn't getting set up. I have a feeling about 02locale being so specific. Why 02. Back in the days when I had a similar thing going on with SysV Init, we had such stuff in our rc.d directory for run levels. Most of those files got installed by particular owning packages. Would anyone who has this file, and does not think they created it from
Re: [gentoo-user] K3b complains about my locale
On Fri, 30 May 2008 16:25:33 -0700, Kevin O'Gorman wrote: I have a feeling about 02locale being so specific. Why 02. So that the locale environment variables are set before most of the others. -- Neil Bothwick If Yoda so strong in force is, why words in right order he cannot put? signature.asc Description: PGP signature