Re: [gentoo-user] xf86-video-ati-6.8.0-r1 problems
On Friday 18 July 2008, Andreas Niederl wrote: Mick wrote: On Thursday 17 July 2008, Andrew Tchernoivanov wrote: # modprobe -v radeon_drv FATAL: Module radeon_drv not found. That's strange. But try one more thing - copy this radeon_drv from /usr/lib/xorg/modules/drivers to /lib/modules/kernel version/kernel/drivers/video Because according to modprobe's man page, by default it will look driver in /lib/modules/... So try to copy it and write here, what will modprobe say First I linked it: # ls -la /lib/modules/2.6.24-gentoo-r8/kernel/drivers/video/ total 8 drwxr-xr-x 3 root root 144 Jul 17 22:21 . drwxr-xr-x 14 root root 344 May 14 18:34 .. drwxr-xr-x 2 root root 72 May 14 18:34 backlight -rw-r--r-- 1 root root 4291 May 14 18:34 output.ko lrwxrwxrwx 1 root root 43 Jul 17 22:21 radeon.so - /usr/lib/xorg/modules/drivers/radeon_drv.so but since that did not work, I copied it: # ls -la /lib/modules/2.6.24-gentoo-r8/kernel/drivers/video/ total 448 drwxr-xr-x 3 root root176 Jul 17 22:27 . drwxr-xr-x 14 root root344 May 14 18:34 .. drwxr-xr-x 2 root root 72 May 14 18:34 backlight -rw-r--r-- 1 root root 4291 May 14 18:34 output.ko lrwxrwxrwx 1 root root 43 Jul 17 22:21 radeon.so - /usr/lib/xorg/modules/drivers/radeon_drv.so -rwxr-xr-x 1 root root 448808 Jul 17 07:09 radeon_drv.so Modprobing either of the two fails with the same error message. That's because this is not a kernel module. drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module radeon (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM [dri] Disabling DRI. I'm just guessing here, but maybe your kernel is missing DRM support for your graphics chip. What's the output of grep -i radeon /boot/config-$(uname -r) ? # grep -i radeon /boot/config-$(uname -r) CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] xf86-video-ati-6.8.0-r1 problems
Mick wrote: On Friday 18 July 2008, Andreas Niederl wrote: [...] I'm just guessing here, but maybe your kernel is missing DRM support for your graphics chip. What's the output of grep -i radeon /boot/config-$(uname -r) ? # grep -i radeon /boot/config-$(uname -r) CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_DRM and CONFIG_DRM_RADEON are needed for direct rendering. The respective options are found in Device Drivers - Character Devices. Regards, Andi -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Video DVD Creation
sean [EMAIL PROTECTED] wrote: Jorg, Another update. I had made two attempts burning my movie to a no-brand DVD-R. Not wanting to waste another DVD-R I instead used a brand name DVD+RW for another test. It worked, the movie played. When I get the chance I will pick up a brand name DVD-R and try the burn again. If you like to use a DVD-R, you may better use cdrecord instead of growisofs in order to get compatibility. Growisofs was designed on top of DVD+RW which uses something similar to packetwriting. Use mkisofs -i xx.iso -dvd-video -r -J DVD/ cdrecord -v -sao xx.iso Jörg -- EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin [EMAIL PROTECTED](uni) [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] xf86-video-ati-6.8.0-r1 problems
Andreas Niederl wrote: Mick wrote: [...] # grep -i radeon /boot/config-$(uname -r) CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_DRM and CONFIG_DRM_RADEON are needed for direct rendering. The respective options are found in Device Drivers - Character Devices. Actually, they moved to Device Drivers - Graphics Support - Direct Rendering Manager in recent kernels. Regards, Andi -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] grub menu working but invisible
Sebastian Günther wrote: * Andrew Tchernoivanov ([EMAIL PROTECTED]) [15.07.08 01:41]: Are the characters on the screen readable? I had this problem too, along with the black grub screen. If they aren't - try adding vga=0x31B to your grub.conf Why should that help with grub? Did not found any hint, that ther is a grub option called like that. There is a *kernel* option, called like that, but that won't help with the grub issue. Please correct me if I'm wrong. Sebastian So what is the solution to making grub visible again? I remember when it changed, I didn't understand the message displayed and I still don't know the fix. Running emerge --config grub doesn't work. Is it as simple as changing the path of the splash image to /usr/share/grub/ and running grub-install? Thanks, Dave -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] grub menu working but invisible
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 dhk wrote: | So what is the solution to making grub visible again? I remember when | it changed, I didn't understand the message displayed and I still don't | know the fix. | | Running emerge --config grub doesn't work. | | Is it as simple as changing the path of the splash image to | /usr/share/grub/ and running grub-install? I changed grub.conf so it points to the splashimage on my /usr partition like so: splashimage=(hd0,5)/share/grub/splash.xpm.gz Just make sure you get the partition number right, remembering that grub counts paritions from 0, not 1. This fixed it perfectly for me. HTH Matt -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (MingW32) iEYEARECAAYFAkiAlkkACgkQxNZfa+YAUWEBcwCfYTdG36hTwCGn1GX9D9nmVTWg UDAAoKlJFt0pM/OSsU52n5Krr9RL1tkY =FCbQ -END PGP SIGNATURE- No virus found in this outgoing message. Checked by AVG - http://www.avg.com Version: 8.0.138 / Virus Database: 270.5.1/1559 - Release Date: 17/07/2008 18:08 -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] playing audio discs
I am a novice with respect to sound. Nearly everything works. totem plays CDs system sounds are OK The trouble is that the cd player, gnome-cd part of gnome-media, says there is no disc in the drive (there is only one drive). I don't have many USE flags (in particular ogg, wavpack, and vorbis) since I don't really know what thes formats are. Since this is a regular CD, I looked for a wav use flag and for gst-plugins-wav, which do not exist. My make.conf has USE= alsa dbus doc emacs esd gnome gtk guile hal java jpeg mad mp3 \ mmx mpeg png ppds scanner sse sse2 truetype X xft xulrunner My /usr/src/linux/.config has CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_SEQUENCER=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y Any help/advice would be appreciated. thanks, allan -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] 2.6.26, rtc problem
Hi! After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. So, questions are: 1. How to force the module loading be before the service starting? 2. How to determine which concrete module is most appropriate to my hardware (there are plenty of rtc_xyz modules)? Andrew -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] emerging meta packages and it's DEPENDS
Hi, emerge package will remerge package regardless of it's state. Is there a way to tell portage to do that for a package's DEPENDS as well? I have 6 ebuilds I maintain myself, all are CVS checkout builds with - version numbers, call them packageA, packageB ... packageF. To make my life easier I have a -meta package that DEPENDS on all 6 and I would like to simply emerge the -meta package and have that cause the direct DEPENDS to also be built everytime. Currently as they always have a - version number, this does not happen. Does portage support what I want to do? -- Alan McKinnon alan dot mckinnon at gmail dot com -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] 2.6.26, rtc problem
On Friday 18 July 2008, Andrew Gaydenko wrote: Hi! After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. So, questions are: 1. How to force the module loading be before the service starting? I believe /etc/modules.d/* may do it. AFAIK it runs very early in the init sequence -- Alan McKinnon alan dot mckinnon at gmail dot com -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] 2.6.26, rtc problem
* Andrew Gaydenko ([EMAIL PROTECTED]) [18.07.08 17:03]: Hi! After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. So, questions are: 1. How to force the module loading be before the service starting? Do not build it as module 2. How to determine which concrete module is most appropriate to my hardware (there are plenty of rtc_xyz modules)? If your system does an autoloading of modules somewhere in time: just lsmod. Otherwise you have to try to load them all and take that one that does not complain about missing hardware... ;-) Andrew HTH Sebastian -- Religion ist das Opium des Volkes. Karl Marx [EMAIL PROTECTED]@N GÜNTHER mailto:[EMAIL PROTECTED] pgpMmY5mOnDEg.pgp Description: PGP signature
Re: [gentoo-user] 2.6.26, rtc problem
=== On Friday 18 July 2008, Alan McKinnon wrote: === On Friday 18 July 2008, Andrew Gaydenko wrote: Hi! After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. So, questions are: 1. How to force the module loading be before the service starting? I believe /etc/modules.d/* may do it. AFAIK it runs very early in the init sequence -- Alan McKinnon alan dot mckinnon at gmail dot com If understand well, those files (in /etc/modules.d/) contain configuration options for modules rather a list of modules to load. The was /etc/modules.autoload.d/kernel-2.6 file wich at some update point magically disappered. I think Gentoo developers suppose some replacement for this file. Andrew -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] 2.6.26, rtc problem
Andrew Gaydenko wrote: === On Friday 18 July 2008, Alan McKinnon wrote: === On Friday 18 July 2008, Andrew Gaydenko wrote: Hi! After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. So, questions are: 1. How to force the module loading be before the service starting? I believe /etc/modules.d/* may do it. AFAIK it runs very early in the init sequence -- Alan McKinnon alan dot mckinnon at gmail dot com If understand well, those files (in /etc/modules.d/) contain configuration options for modules rather a list of modules to load. The was /etc/modules.autoload.d/kernel-2.6 file wich at some update point magically disappered. I think Gentoo developers suppose some replacement for this file. Andrew I still have that file on one of my systems. My other system is running openrc which does not have that file but it does have /etc/conf.d/modules. --Joshua Doll -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] 2.6.26, rtc problem
=== On Friday 18 July 2008, Joshua D Doll wrote: === Andrew Gaydenko wrote: === On Friday 18 July 2008, Alan McKinnon wrote: === On Friday 18 July 2008, Andrew Gaydenko wrote: Hi! After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. So, questions are: 1. How to force the module loading be before the service starting? I believe /etc/modules.d/* may do it. AFAIK it runs very early in the init sequence -- Alan McKinnon alan dot mckinnon at gmail dot com If understand well, those files (in /etc/modules.d/) contain configuration options for modules rather a list of modules to load. The was /etc/modules.autoload.d/kernel-2.6 file wich at some update point magically disappered. I think Gentoo developers suppose some replacement for this file. Andrew I still have that file on one of my systems. My other system is running openrc which does not have that file but it does have /etc/conf.d/modules. --Joshua Doll 'hwclock' contains this fragment: ebegin Setting system clock using the hardware clock [${utc}] if [ -e /proc/modules -a ! -e /dev/rtc ]; then modprobe -q rtc || modprobe -q genrtc fi But there are no such modules at all :-) I have installed openrc since april, but have got time-related problem only now. Andrew -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] 2.6.26, rtc problem
Andrew Gaydenko wrote: === On Friday 18 July 2008, Joshua D Doll wrote: === Andrew Gaydenko wrote: === On Friday 18 July 2008, Alan McKinnon wrote: === On Friday 18 July 2008, Andrew Gaydenko wrote: Hi! After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. So, questions are: 1. How to force the module loading be before the service starting? I believe /etc/modules.d/* may do it. AFAIK it runs very early in the init sequence -- Alan McKinnon alan dot mckinnon at gmail dot com If understand well, those files (in /etc/modules.d/) contain configuration options for modules rather a list of modules to load. The was /etc/modules.autoload.d/kernel-2.6 file wich at some update point magically disappered. I think Gentoo developers suppose some replacement for this file. Andrew I still have that file on one of my systems. My other system is running openrc which does not have that file but it does have /etc/conf.d/modules. --Joshua Doll 'hwclock' contains this fragment: ebegin Setting system clock using the hardware clock [${utc}] if [ -e /proc/modules -a ! -e /dev/rtc ]; then modprobe -q rtc || modprobe -q genrtc fi But there are no such modules at all :-) I have installed openrc since april, but have got time-related problem only now. Andrew I was just letting you know where the file moved to for auto-loading modules. I'm not sure why hwclock isn't loading the module. You could try changing the modprobe -q to modprobe -v. To make the output verbose. --Joshua Doll -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] grub menu working but invisible
Fri, 18 Jul 2008 12:47:52 + dhk [EMAIL PROTECTED] wrote: Sebastian Günther wrote: * Andrew Tchernoivanov ([EMAIL PROTECTED]) [15.07.08 01:41]: Are the characters on the screen readable? I had this problem too, along with the black grub screen. If they aren't - try adding vga=0x31B to your grub.conf Why should that help with grub? Did not found any hint, that ther is a grub option called like that. There is a *kernel* option, called like that, but that won't help with the grub issue. Please correct me if I'm wrong. Sebastian So what is the solution to making grub visible again? I remember when it changed, I didn't understand the message displayed and I still don't know the fix. Running emerge --config grub doesn't work. Is it as simple as changing the path of the splash image to /usr/share/grub/ and running grub-install? Thanks, Dave Just cp /usr/share/grub/splash.xpm.gz /boot/grub/ Or you could point to it in /usr, unless if you have /usr in lvm or something else that grub wont be able to see Miika signature.asc Description: PGP signature
[gentoo-user] Is this because of make oldconfig?
Hi All, I rolled up a new kernel after I ran make oldconfig and noticed this little message: === . . . CC arch/x86/lib/usercopy_32.o AR arch/x86/lib/lib.a LD vmlinux.o MODPOST vmlinux.o WARNING: modpost: Found 10 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' GEN .version CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 KSYM.tmp_kallsyms1.S . . . Kernel: arch/x86/boot/bzImage is ready (#1) Building modules, stage 2. MODPOST 66 modules WARNING: modpost: Found 5 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' CC drivers/acpi/video.mod.o LD [M] drivers/acpi/video.ko CC drivers/block/cryptoloop.mod.o LD [M] drivers/block/cryptoloop.ko CC drivers/bluetooth/bcm203x.mod.o LD [M] drivers/bluetooth/bcm203x.ko CC drivers/bluetooth/hci_uart.mod.o LD [M] drivers/bluetooth/hci_uart.ko . . . === What's it telling me? Is this something I should ignore? -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] Re: Is this because of make oldconfig?
Mick wrote: Hi All, I rolled up a new kernel after I ran make oldconfig and noticed this little message: [...] WARNING: modpost: Found 5 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' [...] What's it telling me? Is this something I should ignore? It's telling you to do 'make CONFIG_DEBUG_SECTION_MISMATCH=y' to get more info :P -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] xf86-video-ati-6.8.0-r1 problems
On Friday 18 July 2008, Andreas Niederl wrote: Andreas Niederl wrote: Mick wrote: [...] # grep -i radeon /boot/config-$(uname -r) CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_DRM and CONFIG_DRM_RADEON are needed for direct rendering. The respective options are found in Device Drivers - Character Devices. Actually, they moved to Device Drivers - Graphics Support - Direct Rendering Manager in recent kernels. Guys, I've checked all my kernel config files on this box: # grep -i DRM /boot/config-2.6.2* /boot/config-2.6.20-gentoo-r8:# CONFIG_DRM is not set /boot/config-2.6.23-gentoo-r9:# CONFIG_DRM is not set /boot/config-2.6.24-gentoo-r4:# CONFIG_DRM is not set /boot/config-2.6.24-gentoo-r7:# CONFIG_DRM is not set /boot/config-2.6.24-gentoo-r8:# CONFIG_DRM is not set However, there is a nice fat drm and radeon modules in my previous kernels, virtue of the fact that I installed xf86-video-ati: # ls -la /lib/modules/2.6.24-gentoo-r7/x11-drm/ total 265 drwxr-xr-x 2 root root104 May 6 20:03 . drwxr-xr-x 6 root root560 May 7 20:35 .. -rw-r--r-- 1 root root 141895 May 6 20:03 drm.ko -rw-r--r-- 1 root root 123260 May 6 20:03 radeon.ko For some reason on the 2.6.24-gentoo-r8 kernel the xf86-video-ati fails to install any modules, hence this message. I haven't configured this box for ages so I may be misunderstanding something here. Do I have to switch to the kernel drivers? -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] Creating a wireless router
Greetings, I want to setup a wireless router for the first time using WPA. Here is the setup I want... Internet---Gentoo Wireless Router---My Computer I have configured my kernel properly from what I can tell and emerged madwifi. However when I modprobe ath_pci nothing shows up. When I do ifconfig -a I get... ath0 Link encap:Ethernet HWaddr 00:19:5B:80:F2:D8 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth0 Link encap:Ethernet HWaddr 00:0E:0C:C4:A8:87 inet addr:66.11.182.5 Bcast:66.11.182.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec4:a887/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:75109 errors:0 dropped:0 overruns:0 frame:0 TX packets:48454 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:95609829 (91.1 Mb) TX bytes:6195064 (5.9 Mb) Base address:0x9000 Memory:ec02-ec04 eth1 Link encap:Ethernet HWaddr 00:0E:0C:C4:43:0F inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec4:430f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:66264 errors:0 dropped:0 overruns:0 frame:0 TX packets:111528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7189540 (6.8 Mb) TX bytes:96020126 (91.5 Mb) Base address:0x9400 Memory:ec04-ec06 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:177 errors:0 dropped:0 overruns:0 frame:0 TX packets:177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:99775 (97.4 Kb) TX bytes:99775 (97.4 Kb) ppp0 Link encap:Point-to-Point Protocol inet addr:66.11.182.5 P-t-P:192.168.200.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1452 Metric:1 RX packets:74713 errors:0 dropped:0 overruns:0 frame:0 TX packets:47995 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:93641841 (89.3 Mb) TX bytes:4912135 (4.6 Mb) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) wifi0 Link encap:UNSPEC HWaddr 00-19-5B-80-F2-D8-38-80-00-00-00-00-00-00-00-00 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:199 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:11 However my computer doesn't show a wireless network to connect too. What do I need is to know what to add to... /etc/conf.d/net and /etc/wpa_supplicant/wpa_supplicant.conf Thanks Jason -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Is this because of make oldconfig?
On Freitag, 18. Juli 2008, Mick wrote: Hi All, I rolled up a new kernel after I ran make oldconfig and noticed this little message: === . . . CC arch/x86/lib/usercopy_32.o AR arch/x86/lib/lib.a LD vmlinux.o MODPOST vmlinux.o WARNING: modpost: Found 10 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' GEN .version CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 KSYM.tmp_kallsyms1.S . . . Kernel: arch/x86/boot/bzImage is ready (#1) Building modules, stage 2. MODPOST 66 modules WARNING: modpost: Found 5 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' CC drivers/acpi/video.mod.o LD [M] drivers/acpi/video.ko CC drivers/block/cryptoloop.mod.o LD [M] drivers/block/cryptoloop.ko CC drivers/bluetooth/bcm203x.mod.o LD [M] drivers/bluetooth/bcm203x.ko CC drivers/bluetooth/hci_uart.mod.o LD [M] drivers/bluetooth/hci_uart.ko . . . === What's it telling me? Is this something I should ignore? it is something you can ignore. I asked lkml once about it and didn't get any answer so it is probably safe. Also, oldconfig is not to blame. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Is this because of make oldconfig?
2008/7/18 Mick [EMAIL PROTECTED]: Hi All, I rolled up a new kernel after I ran make oldconfig and noticed this little message: [snip] WARNING: modpost: Found 10 section mismatch(es). [snip] What's it telling me? Is this something I should ignore? The tool has detected something that could be a kernel bug or could be a false positive. If it is a bug it may or may not actually affect you, but probably won't. You'll know if it does because you'll see nasty errors in your logs. I'd recommend ignoring it unless you see those errors, it shouldn't corrupt your data or anything like that. It has nothing to do with oldconfig. Cheers, Duane. -- I never could learn to drink that blood and call it wine - Bob Dylan -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Re: Is this because of make oldconfig?
On Friday 18 July 2008, Nikos Chantziaras wrote: Mick wrote: Hi All, I rolled up a new kernel after I ran make oldconfig and noticed this little message: [...] WARNING: modpost: Found 5 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' [...] What's it telling me? Is this something I should ignore? It's telling you to do 'make CONFIG_DEBUG_SECTION_MISMATCH=y' to get more info :P Sure, but since I'm not a kernel hacker (to be able to meaningfully decipher 10 pages of esoteric kernel debug info) and I could do without having to remake the kernel in a rush, I thought of asking here first. ;-) BTW, am I supposed to run by hand: make CONFIG_DEBUG_SECTION_MISMATCH=y make modules_install or should I set CONFIG_DEBUG_SECTION_MISMATCH=y somewhere else? -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] Is this because of make oldconfig?
On Friday 18 July 2008, Duane Griffin wrote: 2008/7/18 Mick [EMAIL PROTECTED]: Hi All, I rolled up a new kernel after I ran make oldconfig and noticed this little message: [snip] WARNING: modpost: Found 10 section mismatch(es). [snip] What's it telling me? Is this something I should ignore? The tool has detected something that could be a kernel bug or could be a false positive. If it is a bug it may or may not actually affect you, but probably won't. You'll know if it does because you'll see nasty errors in your logs. I'd recommend ignoring it unless you see those errors, it shouldn't corrupt your data or anything like that. It has nothing to do with oldconfig. Thanks guys. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
[gentoo-user] Re: xf86-video-ati-6.8.0-r1 problems
Mick wrote: [...] For some reason on the 2.6.24-gentoo-r8 kernel the xf86-video-ati fails to install any modules, hence this message. I haven't configured this box for ages so I may be misunderstanding something here. Do I have to switch to the kernel drivers? You need to compile a kernel with DRM + ATI Radeon support. If you're not running this kernel in more than one machine, you can compile it in the kernel; no reason to make it a module. If you intent to also try the proprietary driver, then you need to make it a module (because this driver provides its own DRM module.) -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Creating a wireless router
On 18 Jul 2008, at 15:30, Jason Carson wrote: ... I want to setup a wireless router for the first time using WPA. Here is the setup I want... Internet---Gentoo Wireless Router---My Computer I have configured my kernel properly from what I can tell and emerged madwifi. However when I modprobe ath_pci nothing shows up. When I do ifconfig -a I get... Hi there, I assume you've read http://gentoo-wiki.com/HOWTO_Building_a_Wireless_Access_Point ? When I wrote this I was using a Prism54 card, not an Atheros-based one. I have used Atheros since (and would as a matter of choice), but it appears I never got around to updating the wiki (and I won't update it in the future because, basically, maintaining wikis is a lot of work). Further reading reveals inaccuracies in the current article. Madwifi requires an extra step when creating the interface: wlanconfig ath0 create wlandev wifi0 wlanmode ap http://madwifi.org/wiki/UserDocs/SimpleAccessPoint IIRC you can do this in your modprobe or udev rules (preferable), or as a preup stage in /etc/conf.d/net IIRC a udev (??) rule is created automagically when you first create the interface and it's this you can edit to make it so that it automatically comes up as an AP, rather than in client mode. You state that However when I modprobe ath_pci nothing shows up, but the interface HAS come up - it's shown as wifi0 in the ifconfig output you post. I don't use WPA but when using WEP (which I would advise you to get working first) you then have to: ifconfig wifi0 up iwconfig wifi0 mode Master essid foobert channel 11 iwconfig wifi0 essid foobert channel 11 key aabbccdd (or, obviously, the equivalent in /etc/conf.d/net - this is well documented in /etc/conf.d/net.example) Anyway, Google madwifi master mode should give you plenty of fodder to get things up on a one-off basis using manual commands so that you can see it's working. You then just have to figure out how to integrate what you've learned into the Gentoo bootscripts - hopefully Google gentoo madwifi master mode will help. However my computer doesn't show a wireless network to connect too. I assume you mean your OTHER, client, computer by this. When posting problems it helps to be as explicit as possible - for example when posting the ifconfig output it would've been beneficial to post EVERYTHING you did in order to get there. Oh! Also, the great thing about the madwifi drivers is that you can great virtual APs - as long as they all have the same channel then you can have wifi0, wifi1 and wifi2 on the same card (just `wlanconfig ath0 create wlandev wifi1 wlanmode ap wlanconfig ath0 create wlandev wifi2 wlanmode ap`). You can run one of these open, one as WEP and (presumably) one as WPA, bridging the secure networks with your wired LAN (for best integration) and NATting the open network using iptables (so you can give clients free or filtered internet access without having to worry about them accessing LAN services. This is useful if you have a Nintendo DS, which doesn't support WPA). Please post back any problems. Stroller. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Video DVD Creation
If you like to use a DVD-R, you may better use cdrecord instead of growisofs in order to get compatibility. Growisofs was designed on top of DVD+RW which uses something similar to packetwriting. Use mkisofs -i xx.iso -dvd-video -r -J DVD/ cdrecord -v -sao xx.iso Jörg Thank You. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] 2.6.26, rtc problem
On Fri, 18 Jul 2008 19:02:33 +0400, Andrew Gaydenko wrote: After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. If you need rtc_cmos every time you boot, why not build it into the kernel. That way you can be sure it will be available to anything that needs it. -- Neil Bothwick Stop tagline theft! Copyright your tagline (c) signature.asc Description: PGP signature
Re: [gentoo-user] Creating a wireless router
On 18 Jul 2008, at 17:10, Jason Carson wrote: Yeah, I read the the HOWTO WAP but I am confused. It said to go to another article when using MADWIFI which told be to use the command... ifconfig ath0 down wlanconfig ath0 destroy wlanconfig ath0 create wlandev wifi0 wlanmode ap Right. I didn't see that when reading the HOWTO today, but it is the same command as I gave in my message. Which I did, but now when I try to startup net.ath0 I get the following... penguin init.d # /etc/init.d/net.ath0 start * Starting ath0 * Starting wpa_supplicant on ath0 ... ioctl[SIOCSIWMODE]: Invalid argument Could not configure driver to use managed mode [ ok ] * Starting wpa_cli on ath0 ... [ ok ] * Backgrounding ... This.. ioctl[SIOCSIWMODE]: Invalid argument Could not configure driver to use managed mode [ ok ] ...was not there before, what do I do? Give fuller information. What does `dmesg` say? What does /var/log/messages (or whatever) say? What do wpa-supplicant logs say? I believe it's possible to compile wpa-supplicant with / without madwifi support, so you should check that. I'd also imagine it might be possible to compile madwifi with or without mastermode support, so you may need show that relevant kernel options have been compiled. I believe that ioctl errors are generally associated with trying to tell hardware to do stuff it can't do. So drivers may be the cause here and I would certainly expect `dmesg` to be more verbose. I would STRONGLY advise you to get the access-point working in master mode UNENCRYPTED before continuing to WEP or WPA configuration. Making *incremental* changes help isolate the problem. Finally, unlike some, I have no objection to top-posting. What pisses me off immensely is *changing* the quoting-method of the thread. If you are the first person to reply to a post then by all means top- post; subsequent replies top-posted may be logical and readable. But if someone has replied by bottom-posting then top-posting breaks the continuity of the message. I have to read one level of quoting at the top of the message and another level at the bottom. Leaving aside any other debates about top- versus bottom-posting this does not make any sense AT ALL. Please do not do it! Stroller. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Installation: help me set up my keyboard, please.
Hi, Gentoo, I'm having a great time installing Gentoo, and everything's going swimmingly, including having compiled a kernel, got networking working, I can use a USB stick, . Except I've hit a brick wall. I want to set up my console keyboard, so I go to edit /etc/conf.d/keymaps, as described in the x86 Handbook. That file says, after a temporary previous edit: # # Use KEYMAP to specify the default console keymap. There is a complete tree # of keymaps in /usr/share/keymaps to choose from. KEYMAP=uk # This is aggravatingly vague. I cannot find anything to tell me _HOW_ to Use KEYMAP to specify Somehow, my current setting of uk seems to find and load an appropriate keymap, perhaps /usr/share/keymaps/i386/qwerty/uk.map.gz. So the question is how do I get the system to load up my own special keymap, currently called boottime.keymap.gz on my Debian system? Where must I write this file so that it gets loaded? Where do I find the documentation telling where to write this file? I've delved into /etc/init.d/keymaps (a runscript shell), but it appears merely to use ${KEYMAP}. I cannot see how this script manages to find a filename out of uk. Presumably the interpreter /sbin/runscript runs the find command, somehow. But I can't find any documentation for runscript. So I'm stymied. It's a real jar after so much of the installation has gone so smoothly, with otherwise excellent documentation, well above average for a Linux distro. How do I set my keyboard layout? Thanks in advance for the help! -- Alan Mackenzie (Nuremberg, Germany). -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Installation: help me set up my keyboard, please.
* Alan Mackenzie ([EMAIL PROTECTED]) [18.07.08 23:00]: Hi, Gentoo, Hi, I'm having a great time installing Gentoo, and everything's going swimmingly, including having compiled a kernel, got networking working, I can use a USB stick, . fine, Except I've hit a brick wall. I want to set up my console keyboard, so I go to edit /etc/conf.d/keymaps, as described in the x86 Handbook. Maybe you have just what the Germans call Ein Brett vorm Kopf That file says, after a temporary previous edit: # # Use KEYMAP to specify the default console keymap. There is a complete tree # of keymaps in /usr/share/keymaps to choose from. KEYMAP=uk # This is aggravatingly vague. I cannot find anything to tell me _HOW_ to Use KEYMAP to specify Somehow, my current setting of uk seems to find and load an appropriate keymap, perhaps /usr/share/keymaps/i386/qwerty/uk.map.gz. KEYMAP is just a env var which holds the arguments for loadkeys. And for sure it finds this keymap. And this is by far not vague. See below. If you need uk keyboard layout: your done :-) So the question is how do I get the system to load up my own special keymap, currently called boottime.keymap.gz on my Debian system? Where must I write this file so that it gets loaded? Where do I find the documentation telling where to write this file? I've delved into /etc/init.d/keymaps (a runscript shell), but it appears merely to use ${KEYMAP}. I cannot see how this script manages to find a filename out of uk. Presumably the interpreter /sbin/runscript runs the find command, somehow. But I can't find any documentation for runscript. Keymaps are loaded with loadkeys. man loadkeys gives the glory details. (there is also a hint how to set this as kernel keymap ;-)) It searches in /usr/share/keymaps for the string. As you may have noticed all keymaps differ before the .map.gz. So it should go smoothly, if you put your keymap in any folder, an appropiate for sanity, and rename it to something unique, a la my-own-nifty.map.gz. Test it with # loadkeys my-own-nifty So I'm stymied. It's a real jar after so much of the installation has gone so smoothly, with otherwise excellent documentation, well above average for a Linux distro. How do I set my keyboard layout? loadkeys Thanks in advance for the help! HTH Sebastian -- Religion ist das Opium des Volkes. Karl Marx [EMAIL PROTECTED]@N GÜNTHER mailto:[EMAIL PROTECTED] pgppPFrE6O6i5.pgp Description: PGP signature
Re: [gentoo-user] 2.6.26, rtc problem
=== On Saturday 19 July 2008, Neil Bothwick wrote: === On Fri, 18 Jul 2008 19:02:33 +0400, Andrew Gaydenko wrote: After upgrading to 2.6.26 I have got a problem with starting hwclock service - it doesn't find /dev/rtc. I have tried to add rtc_cmos to /conf.d/modules, but the module loads after the service starting. If you need rtc_cmos every time you boot, why not build it into the kernel. That way you can be sure it will be available to anything that needs it. At first, I frustrated with situation when I can not manage such things :-) Then, I don't understand the reason of the problem. And yet don't know is rtc_cmos the most appropriate choice. -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Re: No progress indicator in bootsplash
Sebastian Günther wrote: * Nikos Chantziaras ([EMAIL PROTECTED]) [16.07.08 17:55]: Sebastian Günther wrote: * Nikos Chantziaras ([EMAIL PROTECTED]) [16.07.08 15:02]: Thanks for helping in tracking down this issue. Here's /etc/conf.d/splash: SPLASH_VERBOSE_ON_ERRORS=no try turning this to yes, maybe there are some error messages that are missed. I went back to troubleshoot this. I *must* have been blind; during the INIT stage, there was a warning that /dev/tty1 is missing (/dev gets mounted too late for fbcondecor to access it). I've created it manually (mknod tty1 c 4 1) and it works now :P -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Non-case sensitive alphabetical sorting
When ordering items by name, a separate and distinct sequence is scene for A-Z before the sequence for a-z. This is the expected behavior. What might i need to look up to intermix [Aa]-[Zz]?
Re: [gentoo-user] Creating a wireless router - I got it working!
ok, I got it working without encryption. Here is what I did I configured my kernel according to these webpages... http://madwifi.org/wiki/Requirements and http://madwifi.org/wiki/UserDocs/KernelConfig ...then I configured my system as follows... 1)Add madwifi to USE flags 2)emerge wpa_supplicant 3)emerge madwifi-ng and madwifi-ng-tools 4)cp net.eth0 net.ath0 5)rc-update add net.ath0 default 6)nano /etc/modprobe.d/ath_pci and add the following... options ath_pci autocreate=ap 7)add the following to /etc/conf.d/local.start ifconfig ath0 down wlanconfig ath0 destroy wlanconfig ath0 create wlandev wifi0 wlanmode ap 8)nano /etc/conf.d/net and add mode_ath0=Master essid_ath0=CarsonNet config_ath0=( 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 ) wpa_supplicant_ath0=-Dmadwifi Then I configured dhcpd and bind which I won't get into and it all worked. I now have a wireless access point with Gentoo! So my question now is, how do I enable WPA encryption? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Creating a wireless router - I got it working!
ok, I got it working without encryption. Here is what I did I configured my kernel according to these webpages... http://madwifi.org/wiki/Requirements and http://madwifi.org/wiki/UserDocs/KernelConfig ...then I configured my system as follows... 1)Add madwifi to USE flags 2)emerge wpa_supplicant 3)emerge madwifi-ng and madwifi-ng-tools 4)cp net.eth0 net.ath0 5)rc-update add net.ath0 default 6)nano /etc/modprobe.d/ath_pci and add the following... options ath_pci autocreate=ap 7)add the following to /etc/conf.d/local.start OOPS: I added it to local.stop ifconfig ath0 down wlanconfig ath0 destroy wlanconfig ath0 create wlandev wifi0 wlanmode ap 8)nano /etc/conf.d/net and add mode_ath0=Master essid_ath0=CarsonNet config_ath0=( 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 ) wpa_supplicant_ath0=-Dmadwifi Then I configured dhcpd and bind which I won't get into and it all worked. I now have a wireless access point with Gentoo! So my question now is, how do I enable WPA encryption? -- gentoo-user@lists.gentoo.org mailing list -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] dev-python/setuptools conflict when running python-updater
I did some updates today. emerge --sync and updated world on my production machine. Things went OK, including running python-updater. Then I scp'd the contents of /usr/portage/distfiles over to my hot backup machine, ran emerge --sync (pointing at my production machine) and updated. Just like on the main machine, /var/log/portage/elog had an advisory to run python-updater. This time, it didn't work... === d531 elog # /usr/sbin/python-updater * Starting Python Updater from 2.4 to 2.5 : * Adding to list: =sys-libs/cracklib-2.8.10 * Adding to list: =net-mail/getmail-4.7.6 * Adding to list: =app-office/gnumeric-1.8.2 * Adding to list: =dev-java/java-config-1.3.7 * Adding to list: =dev-java/java-config-2.1.6 * Adding to list: =dev-python/python-fchksum-1.7.1 * Adding to list: =dev-python/docutils-0.4-r3 * Adding to list: =dev-python/setuptools-0.6_rc7-r1 * Adding to list: =dev-python/pycrypto-2.0.1-r6 These are the packages that would be merged, in order: Calculating dependencies \ !!! Multiple versions within a single package slot have been !!! pulled into the dependency graph: dev-python/setuptools:0 ('ebuild', '/', 'dev-python/setuptools-0.6_rc7-r1', 'merge') (no parents) ('ebuild', '/', 'dev-python/setuptools-0.6_rc8-r1', 'merge') pulled in by ('ebuild', '/', 'dev-python/docutils-0.4-r3', 'merge') === Masking out =dev-python/setuptools-0.6_rc7-r1 didn't work, so I'm considering removing it. Having been burned before when unmerging core-utils (OUCH!!!) I thought I'd ask here before doing anything stupid. How do I get around this python-updater problem? -- Walter Dnes [EMAIL PROTECTED] -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] WPA encryption on my wireless network
I have installed and configured my wirelss network with MadWifi and wpa_supllicant. However it is unencrypted. What do I have to do to setup WPA encryption? I have followed this (http://gentoo-wiki.com/HOWTO_Building_a_Wireless_Access_Point#WPA_Encryption) but when I run... hostapd -dd /etc/hostapd/hostapd.conf I get this... Configuration file: /etc/hostapd/hostapd.conf madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:19:5b:80:f2:d8 and ssid 'CarsonNet' Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[unknown???]: Invalid argument Could not connect to kernel driver. Deauthenticate all stations rmdir[ctrl_interface]: No such file or directory madwifi_set_privacy: enabled=0 madwifi_set_iface_flags: dev_up=0 When I run this... /etc/init.d/hostapd start I get this... * Starting hostapd ... Configuration file: /etc/hostapd/hostapd.conf Using interface ath0 with hwaddr 00:19:5b:80:f2:d8 and ssid 'CarsonNet' Flushing old station entries ioctl[unknown???]: Invalid argument Could not connect to kernel driver. Deauthenticate all stations rmdir[ctrl_interface]: No such file or directory [ !! ] So what does this mean? ioctl[unknown???]: Invalid argument I can't get hostapd to startup until this is fixed. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] WPA encryption on my wireless network
Jason Carson wrote: SNIP So what does this mean? ioctl[unknown???]: Invalid argument I can't get hostapd to startup until this is fixed. No knowledge here but google may have found something. http://madwifi.org/ticket/422 Hope that helps. Dale :-) :-) -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] WPA encryption on my wireless network
Jason Carson wrote: SNIP So what does this mean? ioctl[unknown???]: Invalid argument I can't get hostapd to startup until this is fixed. No knowledge here but google may have found something. http://madwifi.org/ticket/422 Hope that helps. Dale That looked promising. There was a link on that page to another page that looked like it would fix what was happening to me. Unforunately that last link is broken http://gnudot.org/howto/wifi/madwifi-wpa_supplicant_RSN_howto/madwifi-wpa_supplicant_RSN_howto.html :-) :-) -- gentoo-user@lists.gentoo.org mailing list -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Mounting usb problem
Hi all, I have problem regarding mounting my usb thumbdrive. I have tried to add this line to /etc/fstab: echo /dev/usb /mnt/usb auto noauto,rw,user /etc/fstab After i mount it: mount /dev/usb It shows there is no mount point for /dev/usb I wonder is it this is the correct line that i should put into /etc/fstab? Or should i post the output of dmesg here? Regards, Norman -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Mounting usb problem
NORMAN HAKIM YAHYA --- On Fri, 7/18/08, Norman Hakim [EMAIL PROTECTED] wrote: From: Norman Hakim [EMAIL PROTECTED] Subject: [gentoo-user] Mounting usb problem To: gentoo-user@lists.gentoo.org Date: Friday, July 18, 2008, 10:56 PM Hi all, I have problem regarding mounting my usb thumbdrive. I have tried to add this line to /etc/fstab: echo /dev/usb /mnt/usb auto noauto,rw,user /etc/fstab After i mount it: mount /dev/usb It shows there is no mount point for /dev/usb I wonder is it this is the correct line that i should put into /etc/fstab? Or should i post the output of dmesg here? Regards, Norman -- This is the output: usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 SCSI device sda: 3973120 512-byte hdwr sectors (2034 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 sda: assuming drive cache: write through SCSI device sda: 3973120 512-byte hdwr sectors (2034 MB) sda: Write Protect is off sda: Mode Sense: 23 00 00 00 sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi removable disk sda usb-storage: device scan complete sd 0:0:0:0: Attached scsi generic sg0 type 0 Regards, Norman -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Mounting usb problem
At Fri, 18 Jul 2008 20:56:24 -0700 (PDT) Norman Hakim [EMAIL PROTECTED] wrote: I have problem regarding mounting my usb thumbdrive. I have tried to add this line to /etc/fstab: echo /dev/usb /mnt/usb auto noauto,rw,user /etc/fstab Do you have a file called /dev/usb ? On my system they have longer names. What does ls /dev/usb* show? allan -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Mounting usb problem
Do you have a file called /dev/usb ? On my system they have longer names. What does ls /dev/usb* show? allan -- It shows: /dev/usbdev1.1_ep00 /dev/usbdev1.2_ep81 /dev/usbdev3.1_ep81 /dev/usbdev1.1_ep81 /dev/usbdev2.1_ep00 /dev/usbdev4.1_ep00 /dev/usbdev1.2_ep00 /dev/usbdev2.1_ep81 /dev/usbdev4.1_ep81 /dev/usbdev1.2_ep02 /dev/usbdev3.1_ep00 Regards, Norman -- gentoo-user@lists.gentoo.org mailing list