Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, Sep 15, 2009 at 10:14 AM, Paul Hartman wrote: > On Tue, Sep 15, 2009 at 6:21 AM, Alan McKinnon > wrote: >> Yes, that's what it is. I too have USE="-xcb" for libX11 > > I have xcb use flag enabled and haven't encountered any problems (and > nothing had to be rebuilt). libX11-1.2.2 > > Maybe I missed it earlier in the thread but is this somehow a byproduct of running ~arch vs stable? I do not have -xcb on any of my machines and haven't seen any problems. (Yet...) I know a lot of folks here do run ~arch but I don't. Thanks, Mark
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, Sep 15, 2009 at 6:21 AM, Alan McKinnon wrote: > Yes, that's what it is. I too have USE="-xcb" for libX11 I have xcb use flag enabled and haven't encountered any problems (and nothing had to be rebuilt). libX11-1.2.2
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tuesday 15 September 2009 12:22:59 Mike Kazantsev wrote: > On Tue, 15 Sep 2009 09:58:58 +0200 > > Alan McKinnon wrote: > > On Tuesday 15 September 2009 09:49:39 Helmut Jarausch wrote: > > > On 15 Sep, Neil Bothwick wrote: > > > > To completely get rid of libxcb-xlib.so references, please read : > > > > http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide. > > > >xml > > > > > > Since my browser got broken, too, this took some time. > > > And following that advice takes even much more time, since > > > I have to rebuild half of my system. > > > > > > Luckily it has 4 cores, > > > Helmut. > > > > The gods must be favouring me for a change. I'm completely unaffected > > by this upgrade :-) > > > > $ sudo /var/portage/x11-libs/libxcb/files/xcb-rebuilder.sh > > Password: > > * Fixing broken libtool archives (.la) > > * Scanning for libraries requiring libxcb-xlib.so... > > * No broken libraries detected > > > > I wonder what I did different? > > Prehaps nothing. > Rebuild warning is triggered by a check for libxcb-xlib.so.0.0.0, which > didn't seem to exist on my system either. > Guess "xcb" use-flag for libX11 is to blame: if it's not set, then > older libX11 brought along it's own libxcb. Yes, that's what it is. I too have USE="-xcb" for libX11 -- alan dot mckinnon at gmail dot com
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, 15 Sep 2009 10:34:32 +0200 (CEST), Helmut Jarausch wrote: > > I had some breakage, but nothing significant. I only realised anything > > was wrong because emerge @preserved-rebuild failed on most packages, > > so I then RTFMed, ran the commands from that web page and all was > > fine. Konqueror kept working fine, so I didn't need to remember how > > to work any of the lynx variants. > You must be very lucky to have such a fast machine. Are you saying this only breaks on slow machines? Machine performance is hardly relevant when nothing broke that wasn't fixable by a background revdep-rebuild while still using the computer. -- Neil Bothwick Never argue with an idiot. First, they bring you down to their level. Then they beat you with experience. signature.asc Description: PGP signature
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, 15 Sep 2009 09:58:58 +0200 Alan McKinnon wrote: > On Tuesday 15 September 2009 09:49:39 Helmut Jarausch wrote: > > On 15 Sep, Neil Bothwick wrote: > > > > To completely get rid of libxcb-xlib.so references, please read : > > > http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml > > > > Since my browser got broken, too, this took some time. > > And following that advice takes even much more time, since > > I have to rebuild half of my system. > > > > Luckily it has 4 cores, > > Helmut. > > > > The gods must be favouring me for a change. I'm completely unaffected > by this upgrade :-) > > $ sudo /var/portage/x11-libs/libxcb/files/xcb-rebuilder.sh > Password: > * Fixing broken libtool archives (.la) > * Scanning for libraries requiring libxcb-xlib.so... > * No broken libraries detected > > I wonder what I did different? Prehaps nothing. Rebuild warning is triggered by a check for libxcb-xlib.so.0.0.0, which didn't seem to exist on my system either. Guess "xcb" use-flag for libX11 is to blame: if it's not set, then older libX11 brought along it's own libxcb. -- Mike Kazantsev // fraggod.net signature.asc Description: PGP signature
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, 15 Sep 2009 11:34:37 +0200 Volker Armin Hemmann wrote: > > I'm following the recipe on > > http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml > > > > which results in > > > > emerge -v1 -j4 x11-proto/xcb-proto x11-libs/libxcb > > emerge -v1 -j4 x11-proto/xproto x11-proto/xextproto x11-libs/libX11 > > x11-libs/libXext > ... > -j4? > > if you want to give makeopts - that belongs into /etc/make.conf. I > didn't even know that portage forwards those options emerge (at least 2.2) has it's own --jobs option to build several packages in parallel, if possible. -- Mike Kazantsev // fraggod.net signature.asc Description: PGP signature
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
Ward Poelmans wrote: > On Tue, Sep 15, 2009 at 10:51, Jorma Airola wrote: > > >> Same here, no breakage on my laptop or desktop. >> >> I have used dev-util/lafilefixer few time with "--justfixit" option >> few times,could that be the reason for smooth upgrade? >> > > Did you remove the lib "libxcb-xlib.so" or is it still there? > > Ward > No i did not remove it nor is it there , "slocate libxcb-xlib.so.0" returns nothing. Elogv for x11-libs/libxcb-1.4-r shows only "INFO: prepare x xRunning elibtoolize in: libxcb-1.4 x x Applying portage-2.2.patch ... x x Applying sed-1.5.6.patch ... x x Applying as-needed-2.2.6.patch ... This is on my laptop with x86 system, haven't gone through my desktop with x86_64 thoroughly yet.
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tuesday 15 September 2009 11:01:11 Ward Poelmans wrote: > On Tue, Sep 15, 2009 at 10:51, Jorma Airola wrote: > > Same here, no breakage on my laptop or desktop. > > > > I have used dev-util/lafilefixer few time with "--justfixit" option > > few times,could that be the reason for smooth upgrade? > > Did you remove the lib "libxcb-xlib.so" or is it still there? I don't have any file named libxcb-xlib* anywhere And I don't remember removing such a file or ever reading an elog related to xcb. -- alan dot mckinnon at gmail dot com
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Dienstag 15 September 2009, Helmut Jarausch wrote: > On 15 Sep, Neil Bothwick wrote: > > On Tue, 15 Sep 2009 09:58:58 +0200, Alan McKinnon wrote: > >> The gods must be favouring me for a change. I'm completely unaffected > >> by this upgrade :-) > > > > I had some breakage, but nothing significant. I only realised anything > > was wrong because emerge @preserved-rebuild failed on most packages, so I > > then RTFMed, ran the commands from that web page and all was fine. > > Konqueror kept working fine, so I didn't need to remember how to work any > > of the lynx variants. > > You must be very lucky to have such a fast machine. > > I'm following the recipe on > http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml > > which results in > > emerge -v1 -j4 x11-proto/xcb-proto x11-libs/libxcb > emerge -v1 -j4 x11-proto/xproto x11-proto/xextproto x11-libs/libX11 > x11-libs/libXext > > /usr/portage/x11-libs/libxcb/files/xcb-rebuilder.sh > > emerge -1 -j4 \ > $(for i in x11-proto/ x11-libs/libxcb x11-libs/libX11 x11-libs/libXext \ >x11-libs/libX x11-libs/xcb-util x11-libs/cairo \ >x11-libs/pango x11-libs/gtk+ gnome-base/libgnomeui \ >x11-libs/qt-gui; do \ > qlist -IC $i; \ > done) -v > > revdep-rebuild -L libxcb-xlib.so.0 -- -j4 --ask --keep-going > > > This requires to rebuild 182 packages and proably several > hours on a modern PC (Phenom II 4 cores) > > (this includes some not so tiny packages like gcc (2 slots) > several gnome and kde libraries) > > (Sometimes, Gentoo is an expensive hobby) > > Helmut. > -j4? if you want to give makeopts - that belongs into /etc/make.conf. I didn't even know that portage forwards those options
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, Sep 15, 2009 at 10:51, Jorma Airola wrote: > Same here, no breakage on my laptop or desktop. > > I have used dev-util/lafilefixer few time with "--justfixit" option > few times,could that be the reason for smooth upgrade? Did you remove the lib "libxcb-xlib.so" or is it still there? Ward
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
Alan McKinnon wrote: > On Tuesday 15 September 2009 09:49:39 Helmut Jarausch wrote: > >> On 15 Sep, Neil Bothwick wrote: >> > > >>> To completely get rid of libxcb-xlib.so references, please read : >>> http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml >>> >> Since my browser got broken, too, this took some time. >> And following that advice takes even much more time, since >> I have to rebuild half of my system. >> >> Luckily it has 4 cores, >> Helmut. >> >> > > The gods must be favouring me for a change. I'm completely unaffected by this > upgrade :-) > > $ sudo /var/portage/x11-libs/libxcb/files/xcb-rebuilder.sh > Password: > * Fixing broken libtool archives (.la) > * Scanning for libraries requiring libxcb-xlib.so... > * No broken libraries detected > > I wonder what I did different? > > Same here, no breakage on my laptop or desktop. I have used dev-util/lafilefixer few time with "--justfixit" option few times,could that be the reason for smooth upgrade?
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On 15 Sep, Neil Bothwick wrote: > On Tue, 15 Sep 2009 09:58:58 +0200, Alan McKinnon wrote: > >> The gods must be favouring me for a change. I'm completely unaffected >> by this upgrade :-) > > I had some breakage, but nothing significant. I only realised anything > was wrong because emerge @preserved-rebuild failed on most packages, so I > then RTFMed, ran the commands from that web page and all was fine. > Konqueror kept working fine, so I didn't need to remember how to work any > of the lynx variants. > You must be very lucky to have such a fast machine. I'm following the recipe on http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml which results in emerge -v1 -j4 x11-proto/xcb-proto x11-libs/libxcb emerge -v1 -j4 x11-proto/xproto x11-proto/xextproto x11-libs/libX11 x11-libs/libXext /usr/portage/x11-libs/libxcb/files/xcb-rebuilder.sh emerge -1 -j4 \ $(for i in x11-proto/ x11-libs/libxcb x11-libs/libX11 x11-libs/libXext \ x11-libs/libX x11-libs/xcb-util x11-libs/cairo \ x11-libs/pango x11-libs/gtk+ gnome-base/libgnomeui \ x11-libs/qt-gui; do \ qlist -IC $i; \ done) -v revdep-rebuild -L libxcb-xlib.so.0 -- -j4 --ask --keep-going This requires to rebuild 182 packages and proably several hours on a modern PC (Phenom II 4 cores) (this includes some not so tiny packages like gcc (2 slots) several gnome and kde libraries) (Sometimes, Gentoo is an expensive hobby) Helmut. -- Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, 15 Sep 2009 09:58:58 +0200, Alan McKinnon wrote: > The gods must be favouring me for a change. I'm completely unaffected > by this upgrade :-) I had some breakage, but nothing significant. I only realised anything was wrong because emerge @preserved-rebuild failed on most packages, so I then RTFMed, ran the commands from that web page and all was fine. Konqueror kept working fine, so I didn't need to remember how to work any of the lynx variants. -- Neil Bothwick I am NOT Paranoid! And why are you always watching me?? signature.asc Description: PGP signature
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tuesday 15 September 2009 09:49:39 Helmut Jarausch wrote: > On 15 Sep, Neil Bothwick wrote: > > To completely get rid of libxcb-xlib.so references, please read : > > http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml > > Since my browser got broken, too, this took some time. > And following that advice takes even much more time, since > I have to rebuild half of my system. > > Luckily it has 4 cores, > Helmut. > The gods must be favouring me for a change. I'm completely unaffected by this upgrade :-) $ sudo /var/portage/x11-libs/libxcb/files/xcb-rebuilder.sh Password: * Fixing broken libtool archives (.la) * Scanning for libraries requiring libxcb-xlib.so... * No broken libraries detected I wonder what I did different? -- alan dot mckinnon at gmail dot com
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On 15 Sep, Neil Bothwick wrote: > On Tue, 15 Sep 2009 09:38:41 +0200 (CEST), Helmut Jarausch wrote: > >> The above URL doesn't help either, >> so any help to 'survive' is appreciated. > > Did you read the elog message when you emerged the new version? Yes, I did ... but > > libxcb-xlib.so is no longer shipped by ${PN} but was kept on your system > > While your system will still work, emerging new packages or updates > will likely fail. You can fix broken libtool .la files by running : > > ${FILESDIR}/xcb-rebuilder.sh This doesn't help ! > > To completely get rid of libxcb-xlib.so references, please read : > http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml > Since my browser got broken, too, this took some time. And following that advice takes even much more time, since I have to rebuild half of my system. Luckily it has 4 cores, Helmut. -- Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tuesday 15 September 2009 09:38:41 Helmut Jarausch wrote: > On 15 Sep, Helmut Jarausch wrote: > > Hi, > > > > as I have just bitten by it, have a look at > > http://bugs.gentoo.org/show_bug.cgi?id=285004 > > > > before upgrading to x11-libs/libxcb-1.4 (1.4.-r1) > > > > since this breaks any X11-application (including your > > browser to look at the URL above) > > > > Such an update should be DOUBLY MASKED !!! > > > > And the messages coming with libxcb just don't help. > > revdep-rebuild doesn't help either. > > > > And one cannot remerge the broken packages either, > > since there configure bails out. > > The above URL doesn't help either, > so any help to 'survive' is appreciated. Install links|links2|elinks|lynx and view the web page from the console These text browsers are insanely useful things ;-) -- alan dot mckinnon at gmail dot com
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On Tue, 15 Sep 2009 09:38:41 +0200 (CEST), Helmut Jarausch wrote: > The above URL doesn't help either, > so any help to 'survive' is appreciated. Did you read the elog message when you emerged the new version? libxcb-xlib.so is no longer shipped by ${PN} but was kept on your system While your system will still work, emerging new packages or updates will likely fail. You can fix broken libtool .la files by running : ${FILESDIR}/xcb-rebuilder.sh To completely get rid of libxcb-xlib.so references, please read : http://www.gentoo.org/proj/en/desktop/x/x11/libxcb-1.4-upgrade-guide.xml -- Neil Bothwick Ethernet (n): something used to catch the etherbunny signature.asc Description: PGP signature
Re: [gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
On 15 Sep, Helmut Jarausch wrote: > Hi, > > as I have just bitten by it, have a look at > http://bugs.gentoo.org/show_bug.cgi?id=285004 > > before upgrading to x11-libs/libxcb-1.4 (1.4.-r1) > > since this breaks any X11-application (including your > browser to look at the URL above) > > Such an update should be DOUBLY MASKED !!! > > And the messages coming with libxcb just don't help. > revdep-rebuild doesn't help either. > > And one cannot remerge the broken packages either, > since there configure bails out. The above URL doesn't help either, so any help to 'survive' is appreciated. > > Oh dear, Gentoo ! > > Helmut. > -- Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany
[gentoo-user] *** WARNING *** - upgrade to libxcb-1.4 (-r1) breaks your system
Hi, as I have just bitten by it, have a look at http://bugs.gentoo.org/show_bug.cgi?id=285004 before upgrading to x11-libs/libxcb-1.4 (1.4.-r1) since this breaks any X11-application (including your browser to look at the URL above) Such an update should be DOUBLY MASKED !!! And the messages coming with libxcb just don't help. revdep-rebuild doesn't help either. And one cannot remerge the broken packages either, since there configure bails out. Oh dear, Gentoo ! Helmut. -- Helmut Jarausch Lehrstuhl fuer Numerische Mathematik RWTH - Aachen University D 52056 Aachen, Germany