Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
Sorry, I have no experience modifying a Jetty setup. My only suggestion is that
you check the logs and work from there. Otherwise, consider moving to a setup
based on Tomcat.
/julian
-Oprindelig meddelelse-
Fra: Jair Santos [mailto:jsantos5...@gmail.com]
Sendt: 8. oktober 2015 00:19
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Julian,
I am getting more confused about this.
I am trying to follow the instructions from
http://wiki.eclipse.org/Jetty/Feature/Cross_Origin_Filter , but it is still not
working.
I didn't have jetty under C:\Program
Files\GeoServer\webapps\geoserver\WEB-INF\lib, so I copied the files
jetty-6.1.8.jar and jetty-util-6.1.8.jar from C:\Program Files\GeoServer\lib.
Then I included in C:\Program
Files\GeoServer\webapps\geoserver\WEB-INF\web.xml the lines
cross-origin
/*
I rebooted the server just in case, and then geoserver stopped working. The
service geoserver was still running but when I go to the browser with
http://localhost:8080/geoserver/web/ I get http error 503.
Any comments will be appreciated.
Thanks.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 06, 2015 11:24 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Aha, in that case, you are running GeoServer inside a Jetty server which is
located at something like C:\Program Files (x86)\GeoServer 2.7.0 Somewhere in
here is where you need to make the modification. I have not tried this myself,
but from http://wiki.eclipse.org/Jetty/Feature/Cross_Origin_Filter,
I am guessing that you need to modify C:\Program Files (x86)\GeoServer
2.7.0\webapps\geoserver\WEB-INF\web.xml
Good luck,
/julian
-Oprindelig meddelelse-
Fra: Jair Santos [mailto:jsantos5...@gmail.com]
Sendt: 6. oktober 2015 22:33
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Sorry, I downloaded the windows installer NOT the windows binary.
Thanks.
JJ.
-Original Message-
From: Jair Santos [mailto:jsantos5...@gmail.com]
Sent: Tuesday, October 6, 2015 1:12 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: RE: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Well,
I downloaded the windows binary and installed geoserver as a windows service
using the wizard with default settings.
Right now I am creating an openlayers app that is running as the default (port
80) web site in the same server. This openlayer web app is trying to access
geoserver with:
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
Isn't that the right way?
Thank you.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 12:43 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
In that case, I'd guess that you are not running GeoServer inside that IIS?
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 17:15
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and send
the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside an
application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc:
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thanks Julian.
The Tomcat option is not really an option at the moment since I will need to
start from scratch and there is another learning curve.
Cheers.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Wednesday, October 07, 2015 11:07 PM
To: Jair Santos <jsantos5...@gmail.com>; 'GeoServer Mailing List List'
<geoserver-users@lists.sourceforge.net>
Subject: SV: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
Sorry, I have no experience modifying a Jetty setup. My only suggestion is
that you check the logs and work from there. Otherwise, consider moving to a
setup based on Tomcat.
/julian
-Oprindelig meddelelse-
Fra: Jair Santos [mailto:jsantos5...@gmail.com]
Sendt: 8. oktober 2015 00:19
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Julian,
I am getting more confused about this.
I am trying to follow the instructions from
http://wiki.eclipse.org/Jetty/Feature/Cross_Origin_Filter , but it is still
not working.
I didn't have jetty under C:\Program
Files\GeoServer\webapps\geoserver\WEB-INF\lib, so I copied the files
jetty-6.1.8.jar and jetty-util-6.1.8.jar from C:\Program
Files\GeoServer\lib.
Then I included in C:\Program
Files\GeoServer\webapps\geoserver\WEB-INF\web.xml the lines
cross-origin
/*
I rebooted the server just in case, and then geoserver stopped working. The
service geoserver was still running but when I go to the browser with
http://localhost:8080/geoserver/web/ I get http error 503.
Any comments will be appreciated.
Thanks.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 06, 2015 11:24 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Aha, in that case, you are running GeoServer inside a Jetty server which is
located at something like C:\Program Files (x86)\GeoServer 2.7.0 Somewhere
in here is where you need to make the modification. I have not tried this
myself, but from http://wiki.eclipse.org/Jetty/Feature/Cross_Origin_Filter,
I am guessing that you need to modify C:\Program Files (x86)\GeoServer
2.7.0\webapps\geoserver\WEB-INF\web.xml
Good luck,
/julian
-Oprindelig meddelelse-
Fra: Jair Santos [mailto:jsantos5...@gmail.com]
Sendt: 6. oktober 2015 22:33
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Sorry, I downloaded the windows installer NOT the windows binary.
Thanks.
JJ.
-Original Message-
From: Jair Santos [mailto:jsantos5...@gmail.com]
Sent: Tuesday, October 6, 2015 1:12 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: RE: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Well,
I downloaded the windows binary and installed geoserver as a windows service
using the wizard with default settings.
Right now I am creating an openlayers app that is running as the default
(port 80) web site in the same server. This openlayer web app is trying to
access geoserver with:
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
Isn't that the right way?
Thank you.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 12:43 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
In that case, I'd guess that you are not running GeoServer inside that IIS?
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 17:15
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and
send the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Ja
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Julian,
I am getting more confused about this.
I am trying to follow the instructions from
http://wiki.eclipse.org/Jetty/Feature/Cross_Origin_Filter , but it is still
not working.
I didn't have jetty under C:\Program
Files\GeoServer\webapps\geoserver\WEB-INF\lib, so I copied the files
jetty-6.1.8.jar and jetty-util-6.1.8.jar from C:\Program
Files\GeoServer\lib.
Then I included in C:\Program
Files\GeoServer\webapps\geoserver\WEB-INF\web.xml the lines
cross-origin
/*
I rebooted the server just in case, and then geoserver stopped working. The
service geoserver was still running but when I go to the browser with
http://localhost:8080/geoserver/web/ I get http error 503.
Any comments will be appreciated.
Thanks.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 06, 2015 11:24 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Aha, in that case, you are running GeoServer inside a Jetty server which is
located at something like C:\Program Files (x86)\GeoServer 2.7.0 Somewhere
in here is where you need to make the modification. I have not tried this
myself, but from http://wiki.eclipse.org/Jetty/Feature/Cross_Origin_Filter,
I am guessing that you need to modify C:\Program Files (x86)\GeoServer
2.7.0\webapps\geoserver\WEB-INF\web.xml
Good luck,
/julian
-Oprindelig meddelelse-
Fra: Jair Santos [mailto:jsantos5...@gmail.com]
Sendt: 6. oktober 2015 22:33
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Sorry, I downloaded the windows installer NOT the windows binary.
Thanks.
JJ.
-Original Message-
From: Jair Santos [mailto:jsantos5...@gmail.com]
Sent: Tuesday, October 6, 2015 1:12 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: RE: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Well,
I downloaded the windows binary and installed geoserver as a windows service
using the wizard with default settings.
Right now I am creating an openlayers app that is running as the default
(port 80) web site in the same server. This openlayer web app is trying to
access geoserver with:
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
Isn't that the right way?
Thank you.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 12:43 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
In that case, I'd guess that you are not running GeoServer inside that IIS?
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 17:15
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and
send the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside
an application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since I've been away for a month and the
problem was still here waiting for me.
I've been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parce
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Aha, in that case, you are running GeoServer inside a Jetty server which is
located at something like
C:\Program Files (x86)\GeoServer 2.7.0
Somewhere in here is where you need to make the modification. I have not tried
this myself, but from
http://wiki.eclipse.org/Jetty/Feature/Cross_Origin_Filter, I am guessing that
you need to modify
C:\Program Files (x86)\GeoServer 2.7.0\webapps\geoserver\WEB-INF\web.xml
Good luck,
/julian
-Oprindelig meddelelse-
Fra: Jair Santos [mailto:jsantos5...@gmail.com]
Sendt: 6. oktober 2015 22:33
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Sorry, I downloaded the windows installer NOT the windows binary.
Thanks.
JJ.
-Original Message-
From: Jair Santos [mailto:jsantos5...@gmail.com]
Sent: Tuesday, October 6, 2015 1:12 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: RE: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Well,
I downloaded the windows binary and installed geoserver as a windows service
using the wizard with default settings.
Right now I am creating an openlayers app that is running as the default (port
80) web site in the same server. This openlayer web app is trying to access
geoserver with:
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
Isn't that the right way?
Thank you.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 12:43 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
In that case, I'd guess that you are not running GeoServer inside that IIS?
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 17:15
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and send
the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside an
application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since I've been away for a month and the problem
was still here waiting for me.
I've been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
The server is responding with
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
If I understood well geoserver itself will have to format the response
including a header containing Access-Control-Allow-Origin = http://
174.5.61.148:80.
Am I right?
I truly believe that there is another solution (other than setup a proxy as
suggested by Stefano) but unfortunately I couldn't find out.
My environment is MS Server 2012, IIS 8, Geoserver 2.7.1.1
Any help will be very much appreciated.
TIA
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Su
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and
send the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside
an application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since Ive been away for a month and the
problem was still here waiting for me.
Ive been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
The server is responding with
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
If I understood well geoserver itself will have to format the response
including a header containing Access-Control-Allow-Origin = http://
174.5.61.148:80.
Am I right?
I truly believe that there is another solution (other than setup a proxy as
suggested by Stefano) but unfortunately I couldnt find out.
My environment is MS Server 2012, IIS 8, Geoserver 2.7.1.1
Any help will be very much appreciated.
TIA
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS is something that you configure on the server side, wrapping the
request client-side is not going to take you anywhere.
I don't know what your environment is, but if you happen to be running
GeoServer on Tomcat 7, this StackOverflow question might help you:
http://stackoverflow.com/questions/22363192/cors-tomcat-geoserver
Another option you have is to setup a proxy on the machine where your web
app is deployed, e.g. using Apache HTTPD. Also this neat little open source
project from the company I work for (GeoSolutions) might be worth a look:
https://github.com/geosolutions-it/http-proxy.
On Tue, Sep 1, 2015 at 6:05 PM, Jair Santos
<jsantos5...@gmail.com<mailto:jsantos5...@gmail.com>> wrote:
Hello all,
I wondering if someone could help me with the following.
I am creating layers with
new ol.layer.Vector({
source: new ol.source.Vector({
url:
'http://174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:pzones',
format: new ol.format.KML() })
}),
I am getting the following error:
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
This means that Geoserver is not returning the proper
Access-Control-Allow-Origin in the response.
Therefore I have to deal with CORS (Cross Origin Resource Sharing).
Basically I have to embed the geoserver request in a javascript code such as
function createCORSRequest(method, url) {
var xhr = new XMLHttpRequest();
.
Where url = http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns
Any ideas?
TIA
JJ.
--
___
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net<mailto:Geoserver-users@lists.sourcefor
ge.net>
https://lists.sourceforge.net/lists/listinfo/geoserver-users
--
Best regards,
Stefano Cos
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Well,
I downloaded the windows binary and installed geoserver as a windows service
using the wizard with default settings.
Right now I am creating an openlayers app that is running as the default
(port 80) web site in the same server. This openlayer web app is trying to
access geoserver with:
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
Isn't that the right way?
Thank you.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 12:43 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
In that case, I'd guess that you are not running GeoServer inside that IIS?
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 17:15
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and
send the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside
an application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since Ive been away for a month and the
problem was still here waiting for me.
Ive been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
The server is responding with
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
If I understood well geoserver itself will have to format the response
including a header containing Access-Control-Allow-Origin = http://
174.5.61.148:80.
Am I right?
I truly believe that there is another solution (other than setup a proxy as
suggested by Stefano) but unfortunately I couldnt find out.
My environment is MS Server 2012, IIS 8, Geoserver 2.7.1.1
Any help will be very much appreciated.
TIA
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS is something that you configure on the server side, wrapping the
request client-side is not going to take you anywhere.
I don't know what your environment is, but if you happen to be running
GeoServer on Tomcat 7, this StackOverflow question might help you:
http://stackoverflow.com/questions/22363192/cors-tomcat-geoserver
Another option you have is to setup a proxy on the machine where your web
app is deployed, e.g. using Apache HTTPD. Also this neat little open source
project from the company I work for (GeoSolutions) might be worth a look:
https://github.com/geosolutions-it/http-proxy.
On Tue, Sep 1, 2015 at 6:05 PM, Jair Santos
<jsantos5...@gmail.com<mailto:jsantos5...@gmail.com>> wrote:
Hello all,
I wondering if someone could help me with the following.
I am creating layers with
new ol.layer.Vector({
source: new ol.source.Vector({
url:
'http://174.5.61.148:80
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Sorry, I downloaded the windows installer NOT the windows binary.
Thanks.
JJ.
-Original Message-
From: Jair Santos [mailto:jsantos5...@gmail.com]
Sent: Tuesday, October 6, 2015 1:12 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: RE: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Well,
I downloaded the windows binary and installed geoserver as a windows service
using the wizard with default settings.
Right now I am creating an openlayers app that is running as the default
(port 80) web site in the same server. This openlayer web app is trying to
access geoserver with:
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
Isn't that the right way?
Thank you.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 12:43 PM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
In that case, I'd guess that you are not running GeoServer inside that IIS?
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 17:15
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and
send the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside
an application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since Ive been away for a month and the
problem was still here waiting for me.
Ive been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
The server is responding with
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
If I understood well geoserver itself will have to format the response
including a header containing Access-Control-Allow-Origin = http://
174.5.61.148:80.
Am I right?
I truly believe that there is another solution (other than setup a proxy as
suggested by Stefano) but unfortunately I couldnt find out.
My environment is MS Server 2012, IIS 8, Geoserver 2.7.1.1
Any help will be very much appreciated.
TIA
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS is something that you configure on the server side, wrapping the
request client-side is not going to take you anywhere.
I don't know what your environment is, but if you happen to be running
GeoServer on Tomcat 7, this StackOverflow question might help you:
http://stackoverflow.com/questions/22363192/cors-tomcat-geoserver
Another option you have is to setup a proxy on the machine where your web
app is deployed, e.g. using Apache HTTPD. Also this neat little open source
project from the company I work for (GeoSolutions) might be worth a look:
https://github.com/geosolutions-it/h
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
In that case, I'd guess that you are not running GeoServer inside that IIS?
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 17:15
Til: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Julian,
I did exactly that. So the configuration in the server is rather simple.
I've just included a line in the webconfig file , that is
It made no difference whatsoever. Then I realized that this change will make
IIS send the header, and in my case it is Geoserver that will format and
send the response not IIS.
The openlayer program is calling Geoserver with 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels'.
I am really confused about how this work even after reading the tutorial and
examples of CORS.
JJ.
-Original Message-
From: Julian Hollingbery [mailto:jul...@northtech.dk]
Sent: Tuesday, October 6, 2015 1:53 AM
To: 'GeoServer Mailing List List' <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside
an application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since I’ve been away for a month and the
problem was still here waiting for me.
I’ve been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
The server is responding with
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
If I understood well geoserver itself will have to format the response
including a header containing Access-Control-Allow-Origin = http://
174.5.61.148:80.
Am I right?
I truly believe that there is another solution (other than setup a proxy as
suggested by Stefano) but unfortunately I couldn’t find out.
My environment is MS Server 2012, IIS 8, Geoserver 2.7.1.1
Any help will be very much appreciated.
TIA
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS is something that you configure on the server side, wrapping the
request client-side is not going to take you anywhere.
I don't know what your environment is, but if you happen to be running
GeoServer on Tomcat 7, this StackOverflow question might help you:
http://stackoverflow.com/questions/22363192/cors-tomcat-geoserver
Another option you have is to setup a proxy on the machine where your web
app is deployed, e.g. using Apache HTTPD. Also this neat little open source
project from the company I work for (GeoSolutions) might be worth a look:
https://github.com/geosolutions-it/http-proxy.
On Tue, Sep 1, 2015 at 6:05 PM, Jair Santos
<jsantos5...@gmail.com<mailto:jsantos5...@gmail.com>> wrote:
Hello all,
I wondering if someone could help me with the following.
I am creating layers with
new ol.layer.Vector({
source: new ol.source.Vector({
url:
'http://174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:pzones',
format: new ol.format.KML() })
}),
I am getting the following error:
“XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.”
This means that Geoserver is not returning the proper
“Access-Control-Allow-Origin” in the response.
Therefore I have to deal with CORS (Cross Origin Resource Sharing).
Basically I have to embed the geoserver request in a javascript code such as
function createCORSRequest(method, url) {
var xhr = new XMLHttpRequest();
.
Where url = http://
174.5.61.148:8080/geoserver/geid_ws/kml?laye
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS has nothing directly to do with GeoServer, since GeoServer runs inside an
application server.
If I read you correctly, and you are running GeoServer inside IIS, then you
need to find out how to configure CORS on IIS.
I have never done this myself, but Googling "cors on iis8" turns up lots of
links which appear to be helpful.
Regards,
/julian
Fra: Jair Santos [jsantos5...@gmail.com]
Sendt: 6. oktober 2015 01:50
Cc: 'GeoServer Mailing List List'
Emne: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since I’ve been away for a month and the problem
was still here waiting for me.
I’ve been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
The server is responding with
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
If I understood well geoserver itself will have to format the response
including a header containing Access-Control-Allow-Origin = http://
174.5.61.148:80.
Am I right?
I truly believe that there is another solution (other than setup a proxy as
suggested by Stefano) but unfortunately I couldn’t find out.
My environment is MS Server 2012, IIS 8, Geoserver 2.7.1.1
Any help will be very much appreciated.
TIA
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS is something that you configure on the server side, wrapping the request
client-side is not going to take you anywhere.
I don't know what your environment is, but if you happen to be running
GeoServer on Tomcat 7, this StackOverflow question might help you:
http://stackoverflow.com/questions/22363192/cors-tomcat-geoserver
Another option you have is to setup a proxy on the machine where your web app
is deployed, e.g. using Apache HTTPD. Also this neat little open source project
from the company I work for (GeoSolutions) might be worth a look:
https://github.com/geosolutions-it/http-proxy.
On Tue, Sep 1, 2015 at 6:05 PM, Jair Santos
<jsantos5...@gmail.com<mailto:jsantos5...@gmail.com>> wrote:
Hello all,
I wondering if someone could help me with the following.
I am creating layers with
new ol.layer.Vector({
source: new ol.source.Vector({
url:
'http://174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:pzones',
format: new ol.format.KML() })
}),
I am getting the following error:
“XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.”
This means that Geoserver is not returning the proper
“Access-Control-Allow-Origin” in the response.
Therefore I have to deal with CORS (Cross Origin Resource Sharing). Basically I
have to embed the geoserver request in a javascript code such as
function createCORSRequest(method, url) {
var xhr = new XMLHttpRequest();
.
Where url = http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns
Any ideas?
TIA
JJ.
--
___
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net<mailto:Geoserver-users@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/geoserver-users
--
Best regards,
Stefano Costa
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/it488V for more information.
==
Dott. Stefano Costa
Senior Software Engineer
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
---
AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate.
Il loro utilizzo è consentito esclusivamente al destinatario del
messaggio, per le finalità indicate nel messaggio stesso. Qualora
riceviate questo messaggio senza esserne il destinatario, Vi preghiamo
cortesemente di darcene notizia via e-mail e di p
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi all,
I am returning to this thread since I’ve been away for a month and the problem
was still here waiting for me.
I’ve been trying to create a layer with
new ol.layer.Vector({
source: new ol.source.Vector({
url: 'http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels',
format: new ol.format.KML() })
}),
The server is responding with
XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:bmid-parcels. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.
If I understood well geoserver itself will have to format the response
including a header containing Access-Control-Allow-Origin = http://
174.5.61.148:80.
Am I right?
I truly believe that there is another solution (other than setup a proxy as
suggested by Stefano) but unfortunately I couldn’t find out.
My environment is MS Server 2012, IIS 8, Geoserver 2.7.1.1
Any help will be very much appreciated.
TIA
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS is something that you configure on the server side, wrapping the request
client-side is not going to take you anywhere.
I don't know what your environment is, but if you happen to be running
GeoServer on Tomcat 7, this StackOverflow question might help you:
http://stackoverflow.com/questions/22363192/cors-tomcat-geoserver
Another option you have is to setup a proxy on the machine where your web app
is deployed, e.g. using Apache HTTPD. Also this neat little open source project
from the company I work for (GeoSolutions) might be worth a look:
https://github.com/geosolutions-it/http-proxy.
On Tue, Sep 1, 2015 at 6:05 PM, Jair Santos <jsantos5...@gmail.com
<mailto:jsantos5...@gmail.com> > wrote:
Hello all,
I wondering if someone could help me with the following.
I am creating layers with
new ol.layer.Vector({
source: new ol.source.Vector({
url:
'http://174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:pzones',
format: new ol.format.KML() })
}),
I am getting the following error:
“XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.”
This means that Geoserver is not returning the proper
“Access-Control-Allow-Origin” in the response.
Therefore I have to deal with CORS (Cross Origin Resource Sharing). Basically I
have to embed the geoserver request in a javascript code such as
function createCORSRequest(method, url) {
var xhr = new XMLHttpRequest();
.
Where url = http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns
Any ideas?
TIA
JJ.
--
___
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
<mailto:Geoserver-users@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/geoserver-users
--
Best regards,
Stefano Costa
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/it488V for more information.
==
Dott. Stefano Costa
Senior Software Engineer
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
---
AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate.
Il loro utilizzo è consentito esclusivamente al destinatario del
messaggio, per le finalità indicate nel messaggio stesso. Qualora
riceviate questo messaggio senza esserne il destinatario, Vi preghiamo
cortesemente di darcene notizia via e-mail e di procedere alla
distruzione del messaggio stesso, cancellandolo dal Vostro sistema.
Conservare il messaggio stesso, divulgarlo anche in parte,
distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità
diverse, costituisce comportamento contrario ai principi dettati dal
D.Lgs. 196/2003.
The information in this message and/or attachments, is intended solely
for the attention and use of the named addressee(s) and may be
confidential or proprietary in nature or covered by
Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Thank you Stefano.
Actually my environment is Windows Server 2012 and IIS 8. Therefore, after some
research I included the following in webconfig.
It solved the error problem but none of the layers are loading.
JJ.
From: Stefano Costa [mailto:stefano.co...@geo-solutions.it]
Sent: Tuesday, September 1, 2015 10:30 AM
To: Jair Santos <jsantos5...@gmail.com>
Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net>
Subject: Re: [Geoserver-users] How to deal with XMLHttpRequest in Geoserver?
Hi Jair,
CORS is something that you configure on the server side, wrapping the request
client-side is not going to take you anywhere.
I don't know what your environment is, but if you happen to be running
GeoServer on Tomcat 7, this StackOverflow question might help you:
http://stackoverflow.com/questions/22363192/cors-tomcat-geoserver
Another option you have is to setup a proxy on the machine where your web app
is deployed, e.g. using Apache HTTPD. Also this neat little open source project
from the company I work for (GeoSolutions) might be worth a look:
https://github.com/geosolutions-it/http-proxy.
On Tue, Sep 1, 2015 at 6:05 PM, Jair Santos <jsantos5...@gmail.com
<mailto:jsantos5...@gmail.com> > wrote:
Hello all,
I wondering if someone could help me with the following.
I am creating layers with
new ol.layer.Vector({
source: new ol.source.Vector({
url:
'http://174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:pzones',
format: new ol.format.KML() })
}),
I am getting the following error:
“XMLHttpRequest cannot load http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns. No
'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http:// 174.5.61.148' is therefore not allowed access.”
This means that Geoserver is not returning the proper
“Access-Control-Allow-Origin” in the response.
Therefore I have to deal with CORS (Cross Origin Resource Sharing). Basically I
have to embed the geoserver request in a javascript code such as
function createCORSRequest(method, url) {
var xhr = new XMLHttpRequest();
.
Where url = http://
174.5.61.148:8080/geoserver/geid_ws/kml?layers=geid_ws:prv_stns
Any ideas?
TIA
JJ.
--
___
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
<mailto:Geoserver-users@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/geoserver-users
--
Best regards,
Stefano Costa
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/it488V for more information.
==
Dott. Stefano Costa
Senior Software Engineer
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
---
AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate.
Il loro utilizzo è consentito esclusivamente al destinatario del
messaggio, per le finalità indicate nel messaggio stesso. Qualora
riceviate questo messaggio senza esserne il destinatario, Vi preghiamo
cortesemente di darcene notizia via e-mail e di procedere alla
distruzione del messaggio stesso, cancellandolo dal Vostro sistema.
Conservare il messaggio stesso, divulgarlo anche in parte,
distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità
diverse, costituisce comportamento contrario ai principi dettati dal
D.Lgs. 196/2003.
The information in this message and/or attachments, is intended solely
for the attention and use of the named addressee(s) and may be
confidential or proprietary in nature or covered by the provisions of
privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New
Data Protection Code).Any use not in accord with its purpose, any
disclosure, reproduction, copying, distribution, or either
dissemination, either whole or partial, is strictly forbidden except
previous formal approval of the named addressee(s). If you are not the
intended recipient, please contact immediately the sender by
telephone, fax or e-mail and delete the information in this message
that has been received in error. The sender does not give any warranty
or accept liability as the content, accuracy or completeness of sent
messages and accepts no responsibility for changes made after they
were sent or for other risks which arise as a result of e-mail
transmission, viruses, etc.
--
_
