Re: [H] off topic

[Z Vaper]

It should say on the charger itself what the voltage range is.

For example 110V-250V. Etc.
On Dec 1, 2021, 1:55 PM -0500, FORC5 , wrote:
> I figure some one on this list will have some
> experience in this, bought a Rav 4 Prime,
> while the supplied 120V charger is adequate
> really want to get a 240V level 2 charger,
> looking at either the Juicebox or the
> ChargePoint .
>
> leaning towards the ChargePoint  but the
> longer cable on the Juicebox would be a benefit.
>
> rumor is the supplied 120V charger will work
> plugged into 240V but would hate to destroy
> the only charger I have ATM.
>
> anyone have any experience with PHEV and home
> charging stations ?
>
> hope every one is well
>
> fuf
>

Re: [H] Power Supply

[Z Vaper]

I use only seasonic in my critical systems but thermaltake smart white is a 
very good budget option.
On Aug 13, 2020, 9:18 AM -0400, lopaka polena , wrote:
> The last couple I've bought were thermaltake 700 & 1000w. Working well so
> far.
>
> lopaka
>
> On Wed, Aug 12, 2020 at 9:55 PM _ Winterlight 
> wrote:
>
> > What are the good Power supplies available today  is Seasonic still
> > considered quality?
> >

Re: [H] load balance switch?

[Z Vaper]

I think for your use case you may need 3 nics.

Wan0 wan1 and lan0.

Lan0 being your local network.

You can do trickery such as assigning one lab port to two wants with tagging 
trunking and vlans bit that’s too much work for a home setup.

Zulfiqar Naushad
On Jun 18, 2020, 3:03 PM -0400, Al A , wrote:
> https://www.cyberciti.biz/faq/howto-configure-dual-wan-load-balance-failover-pfsense-router/
> So I just need one more NIC.
>
> Thanks again, just what I needed.
> Al
>
> On Thu, Jun 18, 2020 at 6:17 PM Al A  wrote:
>
> > I do have a Core 2 Duo 4GiB and an extra NIC to put in it. That's a good
> > idea.
> >
> > Thanks fellas, for your replies.
> > A

Re: [H] load balance switch?

[Z Vaper]

Dpi = deep packet inspection.

Damned autocorrect.

Zulfiqar Naushad
On Jun 18, 2020, 3:15 PM -0400, Z Vaper , wrote:
> Your computer should be fine. Just make sure not to enable dpi (derp packer 
> inspection). That brings down my 8 thread ryzen 3300x to its knees on a 
> gigabit connection.
>
> Keep it simple and you should be more than fine.
>
> Also enable hardware offload checksum and please use Intel nics. Everything 
> else is garbo.
>
> Zulfiqar Naushad
> On Jun 18, 2020, 3:03 PM -0400, Al A , wrote:
> > https://www.cyberciti.biz/faq/howto-configure-dual-wan-load-balance-failover-pfsense-router/
> > So I just need one more NIC.
> >
> > Thanks again, just what I needed.
> > Al
> >
> > On Thu, Jun 18, 2020 at 6:17 PM Al A  wrote:
> >
> > > I do have a Core 2 Duo 4GiB and an extra NIC to put in it. That's a good
> > > idea.
> > >
> > > Thanks fellas, for your replies.
> > > A

Re: [H] load balance switch?

[Z Vaper]

Your computer should be fine. Just make sure not to enable dpi (derp packer 
inspection). That brings down my 8 thread ryzen 3300x to its knees on a gigabit 
connection.

Keep it simple and you should be more than fine.

Also enable hardware offload checksum and please use Intel nics. Everything 
else is garbo.

Zulfiqar Naushad
On Jun 18, 2020, 3:03 PM -0400, Al A , wrote:
> https://www.cyberciti.biz/faq/howto-configure-dual-wan-load-balance-failover-pfsense-router/
> So I just need one more NIC.
>
> Thanks again, just what I needed.
> Al
>
> On Thu, Jun 18, 2020 at 6:17 PM Al A  wrote:
>
> > I do have a Core 2 Duo 4GiB and an extra NIC to put in it. That's a good
> > idea.
> >
> > Thanks fellas, for your replies.
> > A

Re: [H] load balance switch?

[Z Vaper]

Pfsense opnsense and untangle. I have a subscription to untangle so I’m partial 
to that but I’ve used pfsense and opnsense and both are exceedingly good.

Zulfiqar Naushad
On Jun 18, 2020, 1:51 PM -0400, Z Vaper , wrote:
> If you have a spare computer throw in 2 nics a dash of pfsense and you can do 
> whatever your heart desires.
>
> Zulfiqar Naushad
> On Jun 18, 2020, 1:40 PM -0400, Al A , wrote:
> > I was thinking I didn't want a router behind a router, but maybe I do.
> > https://community.spiceworks.com/topic/1979801-wan-switch-non-router
> > AT&T installs tomorrow.
> > The hunt continues.
> >
> > On Thu, Jun 18, 2020 at 2:24 AM Naushad Zulfiqar  wrote:
> >
> > > I also forgot to add.
> > >
> > > Search for Dual WAN routers and/or switches.
> > >
> > > On Wed, Jun 17, 2020 at 10:24 PM Naushad Zulfiqar 
> > > wrote:
> > >
> > > > You need to create a LAGG (Link Aggregation) group. Just note that if
> > > you
> > > > exceed 1Gbps in combined bandwidth then you will have to have 2 
> > > > ethernets
> > > > going to your system too to get the benefit.
> > > >
> > > >
> > > >
> > > > On Wed, Jun 17, 2020 at 9:45 PM Al A  wrote:
> > > >
> > > > > If I had internet from two sources (ATT and Suddenlink) is there a 
> > > > > load
> > > > > balance switch I could split the load between them. All I can fine is:
> > > > >
> > > > > load balancer - splits incoming requests across multiple servers so 
> > > > > they
> > > > > appear to be one more powerful server
> > > > >
> > > > > But what I want is the opposite, I think. Any help?
> > > > >
> > > > > TIA,
> > > > > Al
> > > > >
> > > >
> > > >
> > > > --
> > > > Best Regards,
> > > >
> > > >
> > > > Zulfiqar Naushad
> > > >
> > >
> > >
> > > --
> > > Best Regards,
> > >
> > >
> > > Zulfiqar Naushad
> > >

Re: [H] load balance switch?

[Z Vaper]

If you have a spare computer throw in 2 nics a dash of pfsense and you can do 
whatever your heart desires.

Zulfiqar Naushad
On Jun 18, 2020, 1:40 PM -0400, Al A , wrote:
> I was thinking I didn't want a router behind a router, but maybe I do.
> https://community.spiceworks.com/topic/1979801-wan-switch-non-router
> AT&T installs tomorrow.
> The hunt continues.
>
> On Thu, Jun 18, 2020 at 2:24 AM Naushad Zulfiqar  wrote:
>
> > I also forgot to add.
> >
> > Search for Dual WAN routers and/or switches.
> >
> > On Wed, Jun 17, 2020 at 10:24 PM Naushad Zulfiqar 
> > wrote:
> >
> > > You need to create a LAGG (Link Aggregation) group. Just note that if
> > you
> > > exceed 1Gbps in combined bandwidth then you will have to have 2 ethernets
> > > going to your system too to get the benefit.
> > >
> > >
> > >
> > > On Wed, Jun 17, 2020 at 9:45 PM Al A  wrote:
> > >
> > > > If I had internet from two sources (ATT and Suddenlink) is there a load
> > > > balance switch I could split the load between them. All I can fine is:
> > > >
> > > > load balancer - splits incoming requests across multiple servers so they
> > > > appear to be one more powerful server
> > > >
> > > > But what I want is the opposite, I think. Any help?
> > > >
> > > > TIA,
> > > > Al
> > > >
> > >
> > >
> > > --
> > > Best Regards,
> > >
> > >
> > > Zulfiqar Naushad
> > >
> >
> >
> > --
> > Best Regards,
> >
> >
> > Zulfiqar Naushad
> >

Re: [H] cases ?

[Z Vaper]

I’m partial to the phanteks

Zulfiqar Naushad
On Jun 15, 2020, 1:03 PM -0400, FORC5 , wrote:
> Always been a Lian-li fan but the current
> generation does not impress me ( I still use
> ODD 5 1/4 drive bays) NO IDEA WHY !
>
> My 10 tear old B-25F broke some parts on the
> top panel not replaceable (fixed with epoxy
> but not happy)
>
> plus it is old and no support for AIO closed
> loop systems and ventilation could be batter
> , ordered a Be Quiet dark base 900 (no
> window, bling does not make it go faster plus
> my skills at wire management are lame) :)
>
> was just curious what the pack likes these
> days, as the wolf used to say, power is in
> the pack :-D
>
>
> fuf
>

Re: [H] AIO coolers

[Z Vaper]

I had a Corsair literally explode. And an antec dry out. It’s part of the game 
to be honest.

Zulfiqar Naushad
On Jun 2, 2020, 4:32 PM -0400, James Boswell , wrote:
> I had a waterblock split on a Coolit Domino and nope'd out of them ever
> since, big Noctua aircoolers on everything for me.
>
> On Mon, 1 Jun 2020 at 17:03, FORC5  wrote:
>
> > was wondering the brands the pack has had the
> > best luck with ?
> >
> > pondering corsair and asus
> >
> > bought a single fan NZXT to test on a shop
> > system, currently having the make some
> > special screws to mount it. case not designed
> > for water cooling
> >
> > too much spare time ATM :{)
> >
> > fuf
> >
> >

Re: [H] AIO coolers

[Z Vaper]

Most water coolers are rebranded asetek units. Asetek owns the patents etc.

So the difference between them is quite minor. Pick based on looks and their 
rma policy.

Zulfiqar Naushad
On Jun 1, 2020, 12:03 PM -0400, FORC5 , wrote:
> was wondering the brands the pack has had the
> best luck with ?
>
> pondering corsair and asus
>
> bought a single fan NZXT to test on a shop
> system, currently having the make some
> special screws to mount it. case not designed
> for water cooling
>
> too much spare time ATM :{)
>
> fuf
>

Re: [H] 32 GB stick of RAM showing up as 16 GB

[Z Vaper]

According to the docs on their site it seems that the platform supports only 
16gb dimms.
On May 9, 2020, 3:08 PM -0400, Brian Weeden , wrote:
> Son's computer needed an upgrade so rummaging through my spares box I found
> a single stick of 32 GB DDR4 RAM. Stuck it in his machine (Inspiron 5680
> running Win10) and it boots just fine. However, it only shows up as 16 GB.
>
> Is this because I'm only using 1 DIMM slot? Otherwise not sure what could
> be the problem.
>
>
> -
> Brian

Re: [H] INTEL CORE

[Z Vaper]

Z390 B360 and H370 all will work with a bios upgrade. I’m using an Asus H370M 
on my proxmox server with a 9700k and it works a treat.
On Apr 17, 2020, 12:05 PM -0400, FORC5 , wrote:
> thanks
> current MB will support i9, probably not i10
> wonder if the i9's comoe down in price a
> little, probably not.
> fuf
> On 4/17/2020 7:37 AM, Z Vaper wrote:
> > 9th gen is current with 10th gen incoming very soon.
> > On Apr 17, 2020, 10:37 AM -0400, FORC5 , wrote:
> > > not keeping up to date, what is the latest
> > > and greatest intel cpu ?
> > >
> > > currently running i7 8700K on LGA 1151 (300
> > > series mb)
> > >
> > > bored at home thinking of upping my office
> > > cpu and using this one to upgrade my server
> > > (which will need MB and memory only)
> > >
> > > thanks
> > >
> > > everyone B safe
> > >
> > > fuf
> > >

Re: [H] INTEL CORE

[Z Vaper]

9th gen is current with 10th gen incoming very soon.
On Apr 17, 2020, 10:37 AM -0400, FORC5 , wrote:
> not keeping up to date, what is the latest
> and greatest intel cpu ?
>
> currently running i7 8700K on LGA 1151 (300
> series mb)
>
> bored at home thinking of upping my office
> cpu and using this one to upgrade my server
> (which will need MB and memory only)
>
> thanks
>
> everyone B safe
>
> fuf
>

Re: [H] Download Speeds slow, but Speed Test is good

[Z Vaper]

When you say downloads where are you downloading from?

I found that speed test is multi threaded. Meaning it makes multiple 
connections to max out the speeds. However if you are doing http downloads 
depending on the server you could only get a single thread which can be 
throttled by the server config.

Try the same download with a multi threaded own load manager. I use internet 
download manager.

Zulfiqar Naushad
On Feb 26, 2020, 10:52 AM -0500, Beave <619be...@gmail.com>, wrote:
> I have an interesting problem.
>
> The download speeds of the computer go to a crawl overnight. A Speed Test
> is done and it maxs out at 212Mbs by 21Mbs. On the downloads goes 51kbs to
> 105kbs.
>
> A simple reset of the computer fixes the problem. I have tried the
> computer's firewall, no go. The Router, no go.
>
> Any Ideas?
>
> Tim Lider
>
> Red Belt at Cardenas School of Arnis
> 
> Anime Enthusiast

Re: [H] Network Solutions

[Z Vaper]

For domains I use namecheap or Gandi.

For hosting I use either vultr or digital ocean. Their LAMP stack is great. You 
can go LEMP too if you want.
On Feb 1, 2020, 12:55 PM -0500, Greg Sevart , wrote:
> I've been using Namecheap as my personal-use registrar and SSL-cert provider
> (Comodo reseller) for about 7 years and have been very satisfied with their
> service. I've not used their email or web hosting, but they do offer plans.
> True to their name, their prices are usually fantastic.
>
> They include a passable free DNS service for domains registered with them,
> too.
>
> -Original Message-
> From: Hardware  On Behalf Of
> Winterlight
> Sent: Saturday, February 1, 2020 11:36 AM
> To: hardw...@lists.hardwaregroup.com
> Subject: Re: [H] Network Solutions
>
>
> I didn't realize that Google did domain register and hosting? Can you
> explain this to me and point me in the right direction. Thanks
>
> At 06:03 AM 2/1/2020, you wrote:
> > Google for domains & Dreamhost... Seems to be good so far. Been using
> > since I left GoDaddy about 4 years now? Google offers free privacy that
> > GoDaddy wants 10 USD for, Google not so greedy. Dreamhost is good.
>
>
>

Re: [H] PCIe controller

[Z Vaper]

https://www.ebay.com/str/theartofserver

Get a hba card in it mode.
On Nov 14, 2019, 10:53 PM -0500, Winterlight , 
wrote:
> I am looking to buy a quality PCIe sata controller. I am not going
> to setup RAID so just 6 Gbps is fine. What I am looking for is solid
> reliability and Windows 10 compatibility. at lest 4 ports. I have
> tried the cheap ones like SYBA and others and they never work that
> well or very reliably. The one I have now hangs at post if anything
> is plugged into the Esata port. Istarted looking for a PROMISE
> but can't find anything that isn't designed for a server. I see a
> brand called LSI but I am not familiar with it ? Any sugestions?
>

Re: [H] SSD drives ?

[Z Vaper]

I’vehad no issues with mine. Deployed over 50 so far
On Sep 23, 2019, 4:20 PM -0400, Thane K. Sherrington 
, wrote:
> I'm hearing about a ton of failures on Intel SSDs on another list (guy
> who bought 100 is at 30 dead in six months).
>
> T
>
> On 23/09/2019 2:46 p.m., Naushad Zulfiqar wrote:
> > While the performance of the Kingston's isn't all that. They are cheap and
> > cheerful. I second the recommendation.
> >
> > Check out the intel drives. I've been using them and really like them.
> >
> > On Mon, Sep 23, 2019 at 1:45 PM Christopher Fisk <
> > christopher.f...@thefisks.org> wrote:
> >
> > > We have some older PC's here that we're upgrading the drives from HDD to
> > > SSD's and for $30 you can get Kingston 240gb drives from amazon. I've not
> > > had any issues with the upgrade.
> > >
> > > On Mon, Sep 23, 2019 at 10:44 AM FORC5  wrote:
> > >
> > > > Always use Samsung or Crucial, anyone ever
> > > > used a WD SSD drive ?
> > > >
> > > > have a older customer build in need of new
> > > > drives to replace the wore out spinners
> > > >
> > > > fufman
> > > >
> > > >
> > > >
> >
>
>

Re: [H] SSD drives ?

[Z Vaper]

Yup I’ve used them. They are great.
On Sep 23, 2019, 10:44 AM -0400, FORC5 , wrote:
> Always use Samsung or Crucial, anyone ever
> used a WD SSD drive ?
>
> have a older customer build in need of new
> drives to replace the wore out spinners
>
> fufman
>
>

Re: [H] List seems dead these days?

[Z Vaper]

The  A QUANTIA A QTION 1-G PRO   NI C


On Aug 9, 2019, 1:19 PM -0400, Steve Tomporowski , wrote:
> Hey Z,
>
> What are you using for a 10G network adapter in the Unraid server? I've
> already have a cache drive in the Unraid server.
>
> Steve
>
> On Fri, Aug 9, 2019 at 8:19 AM Z Vaper  wrote:
>
> > I have 3 wires devices at home. My VM server, unraid server and my desktop
> > and all 3 are 10gbps. The difference is substantial and unraid handles it
> > well provided you're using a caching drive.
> > On Aug 9, 2019, 8:17 AM -0400, Steve Tomporowski ,
> > wrote:
> > > Has anyone gotten into 10G ethernet? A little pricey but is it worth it?
> > > Right now I don't know if Unraid can handle that. There is the thought
> > > that Win10 will just goof it up and waste the bandwidth.
> > >
> > > On Fri, Aug 9, 2019 at 3:18 AM James Boswell 
> > wrote:
> > >
> > > > Userbenchmark isn't without utility, but it should be noted that
> > they've
> > > > just recently rebalanced their cpu performance reporting in a really
> > silly
> > > > way, basically massively understating the performance of >4 core cpus
> > by
> > > > making cores above the 4th 2% of the weight of the score, so by their
> > > > current metrics an i3 can be preferable to a like, 28 core xeon...
> > Which...
> > > > Just no.
> > > >
> > > > On Fri, 9 Aug 2019, 08:09 Brian Weeden, 
> > wrote:
> > > >
> > > > > It's alive!
> > > > >
> > > > > I actually did a rebuild of my main machine at the end of last year
> > > > > (i8700k, Asus Z370-Prime, GTX 1080 SC) and learned the hard way about
> > > > DDR4
> > > > > incompatibilities when filling all four RAM slots.
> > > > >
> > > > > BTW, if you haven't seen it yet, this is a great site for comparing
> > > > various
> > > > > builds:
> > > > > https://www.userbenchmark.com
> > > > >
> > > > > But when it came to my kids' gaming machines, I just bought a pair of
> > > > Dell
> > > > > Inspiron desktops because they were the same price as what I could
> > have
> > > > > built myself and just less hassle.
> > > > >
> > > > > I have found myself getting more into networking gear. I recently
> > rebuild
> > > > > my home network using Unifi gear from Ubiquity (including switches,
> > APs,
> > > > > and POE cameras) and that has proven to be very rewarding. The gear
> > is
> > > > much
> > > > > more customization and powerful than most consumer networking gear.
> > > > >
> > > > > -
> > > > > Brian
> > > > >
> > > > >
> > > > >
> > > > > On Fri, Aug 9, 2019 at 3:12 AM Tim Lider <619be...@gmail.com> wrote:
> > > > >
> > > > > > I've been a part of the list since 95 or 96. I remember when we
> > have
> > > > the
> > > > > > get together in Vegas that year when ComDEX was happening.
> > > > > >
> > > > > > Those were the days,
> > > > > >
> > > > > > Tim Lider
> > > > > > Red Belt Arnis de Mano
> > > > > > https://www.facebook.com/CardenasArnis
> > > > > >
> > > > > > -Original Message-
> > > > > > From: Hardware  On
> > Behalf Of
> > > > > > didymus7
> > > > > > Sent: Thursday, August 8, 2019 3:46 PM
> > > > > > To: hardw...@lists.hardwaregroup.com
> > > > > > Subject: Re: [H] List seems dead these days?
> > > > > >
> > > > > > When did the list begin? I've only been here since '95. Not sure
> > what
> > > > > > month.
> > > > > >
> > > > > > On 8/8/2019 4:53 PM, Scott Sipe wrote:
> > > > > > > I'm embarrassed to say my last serious build was an i7-4970 and a
> > > > > > > Geforce970 (and also embarrassed I had to look up in my email to
> > see
> > > > > > > when that was -- 2014!). I do have an itch to try out AMD again.
> > > > > > >
> > > > > > > I put together a small AMD system a year or so ago with my
> > son--who
> > > > is
> > > > > > > now 9. I think I first joined the HWG when I was around 13 or 14
> > > > (does
> > > > > > > anybody remember when the list started?). Now THAT'S scary.
> > > > > > >
> > > > > > > Great to see so many people still around.
> > > > > > >
> > > > > > > Scott
> > > > > > >
> > > > > > > On Wed, Aug 7, 2019 at 9:01 PM Thane K. Sherrington <
> > > > > > > th...@computerconnectionltd.com> wrote:
> > > > > > >
> > > > > > > > Anyone else getting double posts?
> > > > > > > >
> > > > > > > > On 07/08/2019 9:58 p.m., Thane K. Sherrington wrote:
> > > > > > > > > Yeah, those were the days. :)
> > > > > > > > >
> > > > > > > > > T
> > > > > > > > >
> > > > > > > > > On 07/08/2019 3:16 p.m., Christopher Fisk wrote:
> > > > > > > > >
> > > > > > > > > > Gone are the days of getting a 50% overclock out of a
> > slocket'ed
> > > > > > > > > > Celeron 300a malaysia.
> > > > > > > > > >
> > > > > > > > > > On Wed, Aug 7, 2019 at 1:37 PM Joshua MacCraw <
> > maccr...@gmail.com
> > > > >
> > > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > > Is there an issue at my end or is the list faded?
> > > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> >

Re: [H] List seems dead these days?

[Z Vaper]

I have 3 wires devices at home. My VM server, unraid server and my desktop and 
all 3 are 10gbps. The difference is substantial and unraid handles it well 
provided you're using a caching drive.
On Aug 9, 2019, 8:17 AM -0400, Steve Tomporowski , wrote:
> Has anyone gotten into 10G ethernet? A little pricey but is it worth it?
> Right now I don't know if Unraid can handle that. There is the thought
> that Win10 will just goof it up and waste the bandwidth.
>
> On Fri, Aug 9, 2019 at 3:18 AM James Boswell  wrote:
>
> > Userbenchmark isn't without utility, but it should be noted that they've
> > just recently rebalanced their cpu performance reporting in a really silly
> > way, basically massively understating the performance of >4 core cpus by
> > making cores above the 4th 2% of the weight of the score, so by their
> > current metrics an i3 can be preferable to a like, 28 core xeon... Which...
> > Just no.
> >
> > On Fri, 9 Aug 2019, 08:09 Brian Weeden,  wrote:
> >
> > > It's alive!
> > >
> > > I actually did a rebuild of my main machine at the end of last year
> > > (i8700k, Asus Z370-Prime, GTX 1080 SC) and learned the hard way about
> > DDR4
> > > incompatibilities when filling all four RAM slots.
> > >
> > > BTW, if you haven't seen it yet, this is a great site for comparing
> > various
> > > builds:
> > > https://www.userbenchmark.com
> > >
> > > But when it came to my kids' gaming machines, I just bought a pair of
> > Dell
> > > Inspiron desktops because they were the same price as what I could have
> > > built myself and just less hassle.
> > >
> > > I have found myself getting more into networking gear. I recently rebuild
> > > my home network using Unifi gear from Ubiquity (including switches, APs,
> > > and POE cameras) and that has proven to be very rewarding. The gear is
> > much
> > > more customization and powerful than most consumer networking gear.
> > >
> > > -
> > > Brian
> > >
> > >
> > >
> > > On Fri, Aug 9, 2019 at 3:12 AM Tim Lider <619be...@gmail.com> wrote:
> > >
> > > > I've been a part of the list since 95 or 96. I remember when we have
> > the
> > > > get together in Vegas that year when ComDEX was happening.
> > > >
> > > > Those were the days,
> > > >
> > > > Tim Lider
> > > > Red Belt Arnis de Mano
> > > > https://www.facebook.com/CardenasArnis
> > > >
> > > > -Original Message-
> > > > From: Hardware  On Behalf Of
> > > > didymus7
> > > > Sent: Thursday, August 8, 2019 3:46 PM
> > > > To: hardw...@lists.hardwaregroup.com
> > > > Subject: Re: [H] List seems dead these days?
> > > >
> > > > When did the list begin? I've only been here since '95. Not sure what
> > > > month.
> > > >
> > > > On 8/8/2019 4:53 PM, Scott Sipe wrote:
> > > > > I'm embarrassed to say my last serious build was an i7-4970 and a
> > > > > Geforce970 (and also embarrassed I had to look up in my email to see
> > > > > when that was -- 2014!). I do have an itch to try out AMD again.
> > > > >
> > > > > I put together a small AMD system a year or so ago with my son--who
> > is
> > > > > now 9. I think I first joined the HWG when I was around 13 or 14
> > (does
> > > > > anybody remember when the list started?). Now THAT'S scary.
> > > > >
> > > > > Great to see so many people still around.
> > > > >
> > > > > Scott
> > > > >
> > > > > On Wed, Aug 7, 2019 at 9:01 PM Thane K. Sherrington <
> > > > > th...@computerconnectionltd.com> wrote:
> > > > >
> > > > > > Anyone else getting double posts?
> > > > > >
> > > > > > On 07/08/2019 9:58 p.m., Thane K. Sherrington wrote:
> > > > > > > Yeah, those were the days. :)
> > > > > > >
> > > > > > > T
> > > > > > >
> > > > > > > On 07/08/2019 3:16 p.m., Christopher Fisk wrote:
> > > > > > >
> > > > > > > > Gone are the days of getting a 50% overclock out of a slocket'ed
> > > > > > > > Celeron 300a malaysia.
> > > > > > > >
> > > > > > > > On Wed, Aug 7, 2019 at 1:37 PM Joshua MacCraw 
> > > > > > > >  > >
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > > Is there an issue at my end or is the list faded?
> > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > >
> > > >
> > >
> >

Re: [H] List seems dead these days?

[Z Vaper]

What?

RGB. Lol
On Aug 7, 2019, 2:02 PM -0400, Al A , wrote:
> The world of computing just isn't as exciting as back in the day. :(
> IMHO,
> Al
>
> On Wed, Aug 7, 2019 at 12:37 PM Joshua MacCraw  wrote:
>
> > Is there an issue at my end or is the list faded?
> >

[H] Mongo db

[Z Vaper]

Is someone here well versed in mongo dB?  I have a few questions I can't seem 
to figure out about it.

--
Zulfiqar Naushad
Sent with Airmail

[H] Microsoft suspends Windows 10 update, citing data loss reports | TechCrunch

[Z Vaper]

https://techcrunch.com/2018/10/06/microsoft-suspends-windows-10-update-citing-data-loss-reports/

--
Zulfiqar Naushad
Sent with Airmail

Re: [H] Android app?

[Z Vaper]

https://play.google.com/store/apps/details?id=com.rageconsulting.android.lightflowlite&hl=en_CA



Get Outlook for iOS





On Tue, May 8, 2018 at 4:47 PM -0400, "Winterlight" 
 wrote:











nothing comes up in search for light flow?

At 12:01 PM 5/7/2018, you wrote:
>Check out light flow on the play store.
>
>It's pretty dope once you get it configured correctly.

Re: [H] MOTO G2 = NO Wifi

[Z Vaper]

Do a factory reset.

If that fails then it's time for a new device. Look at the Sony Xperia compact 
line for full featured small phones.

Best Regards,


Zulfiqar Naushad

On Jan 7, 2018, 1:30 PM -0500, Winterlight , wrote:
> I have a Moto G2 that is three years old. It does what I need it do
> and most importantly it fits nicely in a shirt pocket and I would
> just as soon not have to replace it with a new one which are too big.
> However, wi-fi has stopped workingwell, it works intermittently,
> but less and less and when it does work now it comes on and sees a
> neighbors wifi but not mine.
>
> I have no problem with my wifi with many other devices. I have
> other phones, tablets,and laptops using it without any problems. The
> MOTO G2 is a google phone and always seems to be updating it self.
> Fortunately, I have unlimited everything but still I would like to
> use my wifi. The OS is Android version 6.
>
> I have tried all the usual things like powering off ...restarting a
> dozen times. Turning it off and on the next day. Turning the LAN wifi
> off and on. Is there something about Android that I can try or is
> time to replace it? Thanks.
>