Re: [hugin-ptx] Dimension position parameters TRx Try TRz

[dgjohnston]

Sorry, I’ve exhausted my knowledge on how hugin might be calculating and using 
these numbers; it doesn’t seem to match the theory written up in the links I 
put up.

Would any of the developers / support guys have any thoughts on this for Kai?

Don

> On Sep 18, 2018, at 11:04 AM, Kai M  wrote:
> 
> Hey Donald,
> 
> i tried everything to calculate. But i cant figure out the parameters. The 
> Exif Data is readable. The Distance was 40cm from the object. Do you think 
> its possible to calculate it in Pixels?
> 
> Best Regards
> 
> Kai
> 
> -- 
> A list of frequently asked questions is available at: 
> http://wiki.panotools.org/Hugin_FAQ 
> --- 
> You received this message because you are subscribed to the Google Groups 
> "hugin and other free panoramic software" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to hugin-ptx+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/hugin-ptx/b754d685-6c37-4c7b-a606-8b982d51abaa%40googlegroups.com
>  
> .
> For more options, visit https://groups.google.com/d/optout 
> .

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hugin-ptx+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/12B3E566-F84D-4A2C-B673-667DE55B7116%40accesscomm.ca.
For more options, visit https://groups.google.com/d/optout.

Re: [hugin-ptx] Dimension position parameters TRx Try TRz

[Kai M]

Hey Donald,

i tried everything to calculate. But i cant figure out the parameters. The 
Exif Data is readable. The Distance was 40cm from the object. Do you think 
its possible to calculate it in Pixels?

Best Regards

Kai

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hugin-ptx+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/b754d685-6c37-4c7b-a606-8b982d51abaa%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [hugin-ptx] Dimension position parameters TRx Try TRz

[Don Johnston]

This is where I would have to switch into experiment mode. Maybe someone with 
more experience on this could help. 

Was you camera at about 60 cm from the object as my calculation in the previous 
response showed? Did hugin have access to all the exif data in the image so it 
knew focal length etc.

Maybe calculate TRx by dividing your 30 cm by the distance from the object that 
you used when taking the picture, then do a stitch and see how it looks. 


⁣Don

On Sep 7, 2018, 2:51 AM, at 2:51 AM, Kai M  wrote:
>Hello Doanld,
>
>Thank you very much for your answer. Slowly I understand it.  But I
>have 
>another question:
>I move the camera with an accuracy of <1mm over the target. Now I want
>to 
>try to skip the step of CP detection and calculate the positions of TRx
>TRy 
>myself and create a pto file. Unfortunately I still have no idea how to
>
>calculate the TRx and TRy parametersthis. Maybe someone can help?
>
>Greetings from Germany
>
>Kai
>
>
>-- 
>A list of frequently asked questions is available at:
>http://wiki.panotools.org/Hugin_FAQ
>--- 
>You received this message because you are subscribed to the Google
>Groups "hugin and other free panoramic software" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to hugin-ptx+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/hugin-ptx/86496d31-e856-4d60-b80c-5e77308be39a%40googlegroups.com.
>For more options, visit https://groups.google.com/d/optout.

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hugin-ptx+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/395598fb-93ce-4d1f-96d1-045caf037aac%40accesscomm.ca.
For more options, visit https://groups.google.com/d/optout.

Re: [hugin-ptx] Dimension position parameters TRx Try TRz

[Kai M]

Hello Doanld,

Thank you very much for your answer. Slowly I understand it.  But I have 
another question:
I move the camera with an accuracy of <1mm over the target. Now I want to 
try to skip the step of CP detection and calculate the positions of TRx TRy 
myself and create a pto file. Unfortunately I still have no idea how to 
calculate the TRx and TRy parametersthis. Maybe someone can help?

Greetings from Germany

Kai


-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hugin-ptx+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/86496d31-e856-4d60-b80c-5e77308be39a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [hugin-ptx] Dimension position parameters TRx Try TRz

[dgjohnston]

Perhaps this link might help … I had to read it very carefully a few times … 
even though English is my first language.
The picture in the link is from the perspective of someone looking down on you 
standing at the origin 0,0,0.
>From your camera's point of view taking the picture looking at the “Projection 
>Plane”: X is the camera moving left-right (-ve to +ve), Y is the camera moving 
>down-up (-ve to +ve), and Z is in-out (-ve to +ve … “in” being closer to the 
>projection plane)
If you’re in a plane taking a picture straight down just think from you point 
of view as laying down pointing the camera straight down … so Z is “in” to the 
ground (it’s always relative to what your camera is looking at).
I believe from this then that TRx of 0.521 being 30cm is relative to the 
“Projection Plane” at Z=-1 (and the panosphere radius r=1); r must be at about 
twice (1/0.521=1.919) 30cm or 57.6cm.

> https://wiki.panotools.org/Stitching_a_photo-mosaic 
> and




> On Sep 6, 2018, at 10:47 AM, Kai M  wrote:
> 
> 
> It is just a 2D Object. Stitching works very well if i only optimze TRx and 
> TRy. But i try to understand in which dimension these Parameters. On a camera 
> movement of round about 30cm i get a TRx of 0.521 . I try to understand this 
> number.
> 
> -- 
> A list of frequently asked questions is available at: 
> http://wiki.panotools.org/Hugin_FAQ 
> --- 
> You received this message because you are subscribed to the Google Groups 
> "hugin and other free panoramic software" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to hugin-ptx+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/hugin-ptx/69a5f208-8b7b-455d-9481-5f6ce5b7f6c3%40googlegroups.com
>  
> .
> For more options, visit https://groups.google.com/d/optout 
> .

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hugin-ptx+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/1CCEECD8-2FF8-48F0-98CD-D5C2EEBCA666%40accesscomm.ca.
For more options, visit https://groups.google.com/d/optout.

Re: [hugin-ptx] Dimension position parameters TRx Try TRz

[Kai M]

It is just a 2D Object. Stitching works very well if i only optimze TRx and 
TRy. But i try to understand in which dimension these Parameters. On a 
camera movement of round about 30cm i get a TRx of 0.521 . I try to 
understand this number.

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hugin-ptx+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/69a5f208-8b7b-455d-9481-5f6ce5b7f6c3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [hugin-ptx] Dimension position parameters TRx Try TRz

[dgjohnston]

Kai, is this a 3D object?  I believe Mosaic Mode is meant for 2D images like a 
picture or mural.  A 3D object will introduce parallax errors that will make it 
hard to stitch unless you are really careful in placing control points and then 
masking out any overlaps.

Kind regards from Canada.
Don

> On Sep 6, 2018, at 9:51 AM, Kai M  wrote:
> 
> Hello together,
> 
> for a project I create a pto file by script.A camera is moved over the object 
> in defined distances and pictures are taken. Therefore I use the Mosaic Mode.
> I still lack the understanding for the dimension of the position parameter 
> TRX TRY TRZ. In which dimension are the parameters specified? I would be 
> happy if someone could explain this to me.
> 
> Best regards from Germany
> 
> Kai
> 
> -- 
> A list of frequently asked questions is available at: 
> http://wiki.panotools.org/Hugin_FAQ 
> --- 
> You received this message because you are subscribed to the Google Groups 
> "hugin and other free panoramic software" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to hugin-ptx+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/hugin-ptx/8673221b-5a4f-4605-b5d6-c6ac934d8913%40googlegroups.com
>  
> .
> For more options, visit https://groups.google.com/d/optout 
> .

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hugin-ptx+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/53691447-CB7E-415A-BAE7-FBE192C45A25%40accesscomm.ca.
For more options, visit https://groups.google.com/d/optout.