Re: How to suppress Message in REXX App
Lizette,
MSGID only places the ID in the message.
In the TSO PROFILE have you tried NOWTPMSG
NOWTPMSG - SPECIFIES THE USER DOES NOT WISH TO RECEIVE WRITE TO
PROGRAMMER MESSAGES AT HIS TERMINAL
I have not tested it but it may do what you want.
Regards,
Herman Stocker
It is impossible to make anything foolproof, because fools are so ingenious.
-- Robert Heinlein
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Lizette Koehler
Sent: Friday, June 01, 2012 12:44 PM
To: IBM-MAIN@bama.ua.edu
Subject: How to suppress Message in REXX App
Cross Posting to IBM Main and TSO-REXX
I have a Rexx process that issues the HLIST command. I have been successful in
trapping the output from the HLIST but have an issue when the message
ARC0138I is issued.
I have tried turning off all of the TSO PROF functions (MSGID, INTERCOM,
etc)
I have tried turning off message for that section of the code MSG('OFF')
Any yet it keeps getting produced so the user has to keep hitting enter until
they are cleared.
This message can be overwhelming if my user requests 100's of datasets that do
not have an MCDS entry.
Does anyone know if this message can be suppressed from a TSO session? IF so,
suggestions?
Thanks
Lizette Koehler
--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
lists...@bama.ua.edu with the message: INFO IBM-MAIN
---
The sender believes that this E-mail and any attachments were free of any
virus, worm, Trojan horse, and/or malicious code when sent. This message and
its attachments could have been infected during transmission. By reading the
message and opening any attachments, the recipient accepts full
responsibility for taking protective and remedial action about viruses and
other defects. The sender's employer is not liable for any loss or damage
arising in any way from this message or its attachments.
---
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: Retiring after 43+ years with IBM
Frank, Enjoy your time off, you have helped so many people on this list. Thank you. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Frank Yaeger Sent: Tuesday, May 15, 2012 9:00 PM To: IBM-MAIN@bama.ua.edu Subject: Retiring after 43+ years with IBM Just a note to let everyone know I'll be retiring at the end of this month (5/31/2012). I've been with IBM for 43+ years (plus a couple of summers in college) and I've enjoyed my career immensely. I've especially enjoyed being able to help people use the DFSORT/ICETOOL functions I developed, over many years, in new and interesting ways. Once I retire, I won't be posting solutions any more since I won't have access to a mainframe to test them, and I don't like posting untested solutions. I may lurk a bit or I may not. I'm looking forward to retirement, but I'll also miss this list. I'm happy to say that others on the DFSORT Team will continue to contribute. Thanks to everyone for giving me the chance to earn a living all these years doing something that was a lot of fun for me. Long live the mainframe, IBM, z/OS, DFSORT and ICETOOL! Frank Yaeger - DFSORT Development Team (IBM) - yae...@us.ibm.com Specialties: JOINKEYS, FINDREP, WHEN=GROUP, ICETOOL, Symbols, Migration = DFSORT/MVS is on the Web at http://www.ibm.com/storage/dfsort -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: Sclm
Hi Scott, We converted from CA Endevor to SCLM back in July 2011. After the initial learning, about a month or two, we have not seen any problems. If this is your first source control system there will be a large learning curve. However, in the end you will have less errors more free time to be more productive. To your question are there any got Chas - tons. I would suggest that you contract with IBM or an OEM vendor to help set up you initial system. They will help you over the bumps. Good luck. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Scott Ford Sent: Wednesday, April 04, 2012 1:10 PM To: IBM-MAIN@bama.ua.edu Subject: Sclm All, I am considering the usage of IBM's SCLM to manage software products. Since we are 'pure' development ,I thought we might be a good candidate for the Product. I have downloaded the IBM Redbook and i am reviewing it. My question is does anyone have exposure to SCLM and are there any gotchas? Sent from my iPad Scott Ford Senior Systems Engineer www.identityforge.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: A z/OS Redbook Corrected - just about!
Looking a Acronym finder for USS: I see Unix System Service (IBM) as number 6 And Unix System Services as number 14 I think it is time to except it. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Phil Smith Sent: Monday, March 26, 2012 2:36 PM To: IBM-MAIN@bama.ua.edu Subject: Re: A z/OS Redbook Corrected - just about! Dick Bond wrote: I agree with Chris Mason. IBM should have never started called it USS - how about a simple definitive abbreviation, like zUnix. IBM adores putting a z in front of everything (for some clueless reason) so why should their version of Unix be any different? That'd be branding. Not clueless; indicates that it's the System z version of something. Seems pretty clear and simple to me. And it'd be z/Unix if it were done that way, because it's software. Hardware: no slash (z900, z990, z9, zEnterprise); software: slash (z/OS, z/VM, z/VSE, z/Architecture - yes, the architecture is software, go figure). But yeah, it's confusing. IBM should have a TLA Czar, and an ETLA Czar (obviously different people for no apparent reason!) who must rule on all such acronyms. Yes, I'm kidding about the last... -- ...phsiii Phil Smith III p...@voltage.commailto:p...@voltage.com Voltage Security, Inc. www.voltage.comhttp://www.voltage.com (703) 476-4511 (home office) (703) 568-6662 (cell) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
Re: SETTING CONDITION CODE
John,
You have to train the operators.
Regards,
Herman Stocker
It is impossible to make anything foolproof, because fools are so ingenious.
-- Robert Heinlein
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
John Dawes
Sent: Monday, November 28, 2011 1:16 PM
To: IBM-MAIN@bama.ua.edu
Subject: SETTING CONDITION CODE
G'Day,
Can I override a condition code so as to force it to a ? For example the
job-step executes successfully and puts out a COND CODE=0002. The job
continues on to the next step which is what we want. The reason I need a
instead of a 0002 is because I get paged because the operator sees a 0002.
I tried the following by using IDCAMS:
//STEPCOND EXEC PGM=IDCAMS //SYSPRINT DD SYSOUT=* //SYSIN DD *
IF MAXCC=0002 -
THEN -
DO -
SET MAXCC=0 -
END
//*
However this did not force a on the previous step. Is there a way I can
add the IDCAMS IF-THEN-DO logic in the step which is giving me the headache?
Or is there a way of forcing a on that step. Here is what the (headache)
step is doing:
//PRINTDS EXEC PGM=PRTDS, // PARM=('DDNAME(INPDS)', // 'SEA(.) REP(X''40'')',
//'SYSOUT(X)') //INPDS DD DSN=SYS2..INFO.CONFIG,DISP=SHR //SYSPRINT DD
SYSOUT=*
//*
--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at
http://bama.ua.edu/archives/ibm-main.html
---
The sender believes that this E-mail and any attachments were free of any
virus, worm, Trojan horse, and/or malicious code when sent. This message and
its attachments could have been infected during transmission. By reading the
message and opening any attachments, the recipient accepts full
responsibility for taking protective and remedial action about viruses and
other defects. The sender's employer is not liable for any loss or damage
arising in any way from this message or its attachments.
---
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Help on Rexx Code.
Sound like SORT would be a better choice if all you want to do is merge data sets. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of sunil mirchandani Sent: Friday, November 18, 2011 12:06 PM To: IBM-MAIN@bama.ua.edu Subject: Help on Rexx Code. Hello All, I am new to rexx however i have few things to be fixed with the help of rexx.In my shop every hour one dataset is being created by one application, by end of the day or very next day early morning i want to copy all the data from all hourely datasets which are being created yesterday into one sinle datasets. For example: Dataset naming convention A.B.C.Date.**(fifth level qualifier is being changed like a version(hourely basis)) are creating and lets suppose i have total 24 datasets by the end of the day( A.B.C.D18.N000123 A.B.C.D18.N000138 - - A.B.C.D18.24) So by the end of the day i need to copy the data from(A.B.C.Date.**) to one dataset. I checked on the internet and i find that first half can be possible by using the rexx. since i am new to rexx so any one can look and suggest me with any sample or written rexx code. Really appreciate for any help. Please let me know if i am on right forum or not or does any one knows forum related to only REXX ? -- Thanks Much in Advance Regards: Sunil (Yesterday I dared to struggle. Today I dare to win -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: SYNCSORT - No records message
George, Syncsort has a very knowledgeable staff that would most likely be able to answer your question better then the people on this list. Syncsort's phone and web sites are: Phone: 1-201-930-8260 Web:http://www.syncsort.com/ Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of George, William@FTB Sent: Tuesday, November 15, 2011 4:35 PM To: IBM-MAIN@bama.ua.edu Subject: SYNCSORT - No records message I have a SYNCSORT job that splits a large input file into many other specific files. If any of the files ends up with no records written to it is it possible, within the SORT statements, to write out a single record with a message? For example NO RECORDS FOR THIS FILE when this condition is found? If the TRAILER statement is used to do this in some manner I would not want a trailer record written to the files with data however. Thanks for any insights. Bill __ CONFIDENTIALITY NOTICE: This email from the State of California is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review or use, including disclosure or distribution, is prohibited. If you are not the intended recipient, please contact the sender and destroy all copies of this email. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: DSN NOT RELEASING OVER ALLOCATED SPACE
Hi, If the dsn were allocated but never opened and closed the space will not be released. Also, I think that the times when the system can not compute the free space to release. HTH Regards, Herman It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Lizette Koehler Sent: Friday, November 04, 2011 10:13 AM To: IBM-MAIN@bama.ua.edu Subject: Re: DSN NOT RELEASING OVER ALLOCATED SPACE Good Day To All, We are trying to figure out this problem. Job A executes, it creates several dsns and many of these dsns are empty. We have the RLSE parm coded however it doesn't seem release the unused space for the empty dsns. Is there a way of fixing this problem or a work around? We are running RELEASE z/OS 01.11.00 Thanks for your help in advance. It would help if could you provid a screen show of 3.4 INFO for a dataset where the space did not release as well as the JCL statement and Jes messages for that dataset? Lizette -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Redbook d/l issue
Sorry Linda, It was the one in your message. I'm using IE and it opened in the window. IE - 8 Adobe 10.1.1 Good luck. Regards, Herman Stocker avis budget group Phone: 1973-496-4847 It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Linda Mooney Sent: Thursday, October 13, 2011 4:03 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Redbook d/l issue Hi Herman, Could you do me a favor and post the link? If the one that worked for you won't for me, then it's likely my workstation. What browser and version of Reader are you using? Thanks, Linda - Original Message - From: Herman Stocker herman.stoc...@avisbudget.com To: IBM-MAIN@bama.ua.edu Sent: Thursday, October 13, 2011 12:45:49 PM Subject: Re: Redbook d/l issue Hi Linda, I had no problem just clicking on the link and the book was loaded NP. Regards, Herman Stocker avis budget group Phone: 1973-496-4847 It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Linda Mooney Sent: Thursday, October 13, 2011 3:34 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Redbook d/l issue Greetings! Anybody else still having this problem? I still am and and I haven't gotten a respose from my note to the Redbooks folks. Thanks, Linda - Original Message - From: Linda Mooney linda.lst...@comcast.net To: IBM-MAIN@bama.ua.edu Sent: Tuesday, October 11, 2011 7:20:42 PM Subject: Re: Redbook d/l issue Hi Ed, I tried some other Redbooks, no good. Sent a note to the Redbook folks. We will hope for the best. Linda - Original Message - From: Ed Gould ps2...@yahoo.com To: IBM-MAIN@bama.ua.edu Sent: Tuesday, October 11, 2011 4:42:58 PM Subject: Redbook d/l issue I have tried 5 times over the last 5 hours to download this redbook but the d/l stalls after 500K http://www.redbooks.ibm.com/redbooks/pdfs/sg247824.pdf Has anyone else have the same problem? Ed -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Redbook d/l issue
Hi Linda, I had no problem just clicking on the link and the book was loaded NP. Regards, Herman Stocker avis budget group Phone: 1973-496-4847 It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Linda Mooney Sent: Thursday, October 13, 2011 3:34 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Redbook d/l issue Greetings! Anybody else still having this problem? I still am and and I haven't gotten a respose from my note to the Redbooks folks. Thanks, Linda - Original Message - From: Linda Mooney linda.lst...@comcast.net To: IBM-MAIN@bama.ua.edu Sent: Tuesday, October 11, 2011 7:20:42 PM Subject: Re: Redbook d/l issue Hi Ed, I tried some other Redbooks, no good. Sent a note to the Redbook folks. We will hope for the best. Linda - Original Message - From: Ed Gould ps2...@yahoo.com To: IBM-MAIN@bama.ua.edu Sent: Tuesday, October 11, 2011 4:42:58 PM Subject: Redbook d/l issue I have tried 5 times over the last 5 hours to download this redbook but the d/l stalls after 500K http://www.redbooks.ibm.com/redbooks/pdfs/sg247824.pdf Has anyone else have the same problem? Ed -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Trouble with Redbooks Link
Works ok in IE. A little slow, but no problems. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Chip Grantham Sent: Monday, September 12, 2011 11:31 AM To: IBM-MAIN@bama.ua.edu Subject: Trouble with Redbooks Link I just received the weekly Redbooks email with a couple of interesting Redbooks I'd like to read. My session hangs when I try to download the book. Is anyone else have the same trouble? End to End Security - z/OS Identity Propagation Revised: September 7, 2011 http://www.redbooks.ibm.com/redpieces/abstracts/sg247850.html?Open And IBM z/OS V1R13 Communications Server TCP/IP Implementation: Volume 3 High Availability, Scalability, and Performance Published: September 8, 2011 http://www.redbooks.ibm.com/redpieces/abstracts/sg247998.html?Open *** This message may contain confidential information intended only for the use of the addressee(s) named above and may contain information that is legally privileged. If you are not the addressee, or the person responsible for delivering it to the addressee, you are hereby notified that reading, disseminating, distributing or copying this message is strictly prohibited. If you have received this message by mistake, please immediately notify us by replying to the message and delete the original message immediately thereafter. Thank you. *** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html --- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TRX Replacement
Have you looked into: Thomas Conley of Pinnacle Consulting Group, Inc Dynamic ISPF Starter Set (DISS) Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Dennis Schaffer Sent: Monday, February 28, 2011 12:57 PM To: IBM-MAIN@bama.ua.edu Subject: TRX Replacement Hi, We're running TRX from OES Inc., and we're looking for alternatives. TRX provides allocation and i/o services for the TSO/ISPF environment. TRX allows us to avoid maintaining logon procs with hard-coded dataset names or clists/execs to dynamically allocate TSO/ISPF datasets, by providing a dialogue/database to describe individual user/application dataset requirements. TRX also provides performance benefits by dynamically caching frequently-used member and streamlined i/o processing for ISPF datasets. Is anyone aware of a potential replacement for TRX? I'm aware of ALTLIB/LIBDEF but (1 it's not compatible with our existing infrastructure, (2 it's going to require coding exec's for each of our vendor and internal products and (3 it won't provide the performance benefits of TRX. Thanks, Dennis Schaffer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. - -- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Where what to do next - Load modules missing from PDS
Thanks for the ideas. 1. IMS is taken down once a month for maintenance and the compress of the library is done at this time. 2. The person who said that it would not be a program not found was correct it is a load failure. We have not had any load failures, so a compress has not been done. 3. I must have missed this in the original post there were multiple PDS that were hit on different volumes 4. Logrec did not show any problems 5. We have regenerated the modules from the Endevor source so we are hole again we are looking for the how now. 6. Endevor has taken over the IDRC record. The date is not keep there on Endevor generated modules Thank you Bill I will pass your suggestion along to the security people. Thanks everyone for your ideas, suggestion 7 comments. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Where what to do next - Load modules missing from PDS
G'day, We have had a mystery here. On Wednesday last week all programs were in the PDS. On Thursday there were 7 programs missing. The 7 programs belong to the same development group, and no other group has any thing missing. Compress is done once a month when IMS is down, if not IMS regions abend all over the place with programs not found, this has not happened. We are an Endevor shop and Endevor and a very small number of people have access other then read to the data sets. Endevor shows no deletes, The source is showing that the modules have not been generated since 2008 2009. SMF shows no access of update except for Endevor. RACF log shows the same as SMF. I'm at a lost as to where to go next. All help is greatly appreciate. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
RACF - Any way to find out before hand what the user's access is to a file
G'day, I have been asked if there is away for the user to find out what access they have to a data set before they attempt to update or read it. Is their any RACF command that a general user could use to find out the type access they have to a data set? Thank you. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: RACF - Any way to find out before hand what the user's access is to a file
Thank you for you fast response. To answer the why needed question: On occasion security has stated that access has been given only later to find out that the incorrect access was granted or not granted at all. Causing jobs to fail and time to be lost, therefore the user wants away to check security. One of the problems of outsourcing. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Dataset in use help
ISRDDN E next to the data set name in 3.4 will tell you the enques on the data set. Most shops have a WHOHAS function in TSO Regards, Herman Stocker snip Hi all, I have a TSO user that is using PDF option 3;4 and trying to browse a sequential dataset. He keeps getting a dataset in use. Usually I tell them to give it a while and whoever is using it will release it and then he can browse it. This user is being very insistent so I'm wondering is there a command I can use to find out who is using this dataset? /snip The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Moving away from CA-PDSMAN
Duane, Have you looked at the ISPF REFLIST feature? It sounds like just what you are looking for. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein -Original Message- We are trying to move away from CA-PDSMAN. One feature that our few remaining users like, is the Easyedit feature of a list files that the user commonly edits. Has anyone else moved away from PDSMAN and how did you handle that feature? Is there REXX exec out there that will save a list of commonly edited files (some files are likely under different high level indexes) and store that list over different TSO sessions? Thanks, Duane The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: REXX to delete all members of a PDS... serverpac CPPEDELM
Very nice Victor. Thank you. Regards, Herman Stocker It is impossible to make anything foolproof, because fools are so ingenious. -- Robert Heinlein Snip The below REXX [from one of the dino sites, forgot which one] does the job. Can even be used as an action against a given PDS on the DSLIST panel. /* REXX */ /* DELETE ALL MEMBERS OF A GIVEN LIBRARY DSN */ TRACE 'N' /* TRACE 'R' */ /* TRACE 'O' */ PARSE UPPER ARG DSNAME DSN = STRIP(DSNAME, 'BOTH', ) /* IN CASE IT'S IN QUOTES */ QUOTE = ' QDSN = QUOTE||DSN||QUOTE /* FULLY QUOTED DSN */ ADDRESS ISPEXEC LMINIT DATAID( MYDATAID) DATASET( QDSN ) ENQ(SHRW) LMOPEN DATAID(MYDATAID) OPTION(OUTPUT) LMMDEL DATAID(MYDATAID) MEMBER(*) LMCLOSE DATAID(MYDATAID) LMFREE DATAID(MYDATAID) SAY DSN IS NOW EMPTY EXIT HTH, -Victor- /snip The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Regina REXX under W/XP
Steve,
You may want to contact Mark Hessling directly, he is the person (last I
heard anyway) that maintains it:
Regina REXX Interpreter -- By Mark Hessling
email: hessl...@lightlink.com
Regards,
Herman Stocker
It is impossible to make anything foolproof, because fools are so ingenious.
-- Robert Heinlein
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf
Of Thompson, Steve
Sent: Monday, January 04, 2010 3:29 PM
To: IBM-MAIN@bama.ua.edu
Subject: Regina REXX under W/XP
I am attempting to solve a problem I have with some special files that get
used to drive some work under z/OS.
So I thought the best thing to do is write the REXX code to run under
Windows. So when I execute the code, REXX comes back and says:
Error 13 running fully qualified path and file name, line 1: Invalid
character in program
Error 13.1 Invalid character in program ('ff'X)
[Where fully qualified path and file name is the actual fully qualified
Window's file name]
I can not find any doc for Error 13 (I have the manual for Regina REXX
printed and as a PDF). And I'm not seeing any odd characters in this file
(editing it with NOTEPAD).
Can anyone give me a clue as to where these errors are documented (I've been
to sourceforge, no joy. No joy with http://www.rexxla.org/ either).
Even better, what would cause this to think there is an X'FF' byte in this
record (the following is actually the first several records)?
/*
Read CONFIG files for QC and insert today's date as needed.
This initial area is to define all the things that must be
set up for the rest of the exec to work. In particular the
names of files and the handle to associate them with.
*/
Regards,
Steve Thompson
--
For IBM-MAIN subscribe / signoff / archive access instructions, send email
to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the
archives at http://bama.ua.edu/archives/ibm-main.html
- --
The sender believes that this E-mail and any attachments were free of any
virus, worm, Trojan horse, and/or malicious code when sent. This message and
its attachments could have been infected during transmission. By reading the
message and opening any attachments, the recipient accepts full
responsibility for taking protective and remedial action about viruses and
other defects. The sender's employer is not liable for any loss or damage
arising in any way from this message or its attachments.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: xml filess to sequential
Tim, First you will need to add Line Feeds to the end of line, This can be done a number of ways, One is to save the file with them also you can use FTP to add them. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Tim Brown Sent: Wednesday, November 04, 2009 2:11 PM To: IBM-MAIN@bama.ua.edu Subject: xml filess to sequential Can an xml file be transferred to the mainframe and still look like an xml file in TSO ? Whatever I transfer the file it gets wrapped. ?xml version=1.0 standalone=yes? DATAPACKET Version=2.0METADATAFIELDSFIELD attrname= LOCN_ID fieldtype=i4/FIELD attrname=SERIAL_NUM fieldtype=string WIDTH=12/FIELD attrnam e=POSITION fieldtype=i2/ Would like this ?xml version=1.0 standalone=yes? DATAPACKET Version=2.0 METADATA FIELDS FIELD attrname=SERIAL_NUM fieldtype=string WIDTH=12/ Tim Brown Systems Specialist - Project Leader Central Hudson Gas Electric 284 South Ave Poughkeepsie, NY 12601 Email: tbr...@cenhud.com mailto:tbr...@cenhud.com Phone: 845-486-5643 Fax: 845-486-5921 Cell: 845-235-4255 This message contains confidential information and is only for the intended recipient. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, please notify the sender immediately by replying to this note and deleting all copies and attachments. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Excel to DSORG=PS conversion
G'day, I have data given to me in an excel spreadsheet. Is there any way that I can move this data from my PC and MS excel to a sequential file that I can edit with ISPF editor? I've tried a saving as a text file (everything is jammed together on a line). Same thing with a CSV file. I've tried cut and paste column to text file for each column then put them back into order. This was all right for a one timer but I know nothing is ones. Thank you for your assistance. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Excel to DSORG=PS conversion
Thank you Steve. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Steve Comstock Sent: Friday, August 21, 2009 11:27 AM To: IBM-MAIN@bama.ua.edu Subject: Re: Excel to DSORG=PS conversion Stocker, Herman wrote: G'day, I have data given to me in an excel spreadsheet. Is there any way that I can move this data from my PC and MS excel to a sequential file that I can edit with ISPF editor? I've tried a saving as a text file (everything is jammed together on a line). Same thing with a CSV file. I've tried cut and paste column to text file for each column then put them back into order. This was all right for a one timer but I know nothing is ones. Thank you for your assistance. Regards, Herman Stocker Consider taking your CSV file as input to a sort copy, use the PARSE option of INREC or OUTREC to reformat your data to a flat file with fixed length records. Then you're good to go. (This is DFSORT; not sure if SyncSort has that, but I'm sure we'll hear...) -- Kind regards, -Steve Comstock The Trainer's Friend, Inc. 303-393-8716 http://www.trainersfriend.com z/OS Application development made easier * Our classes include + How things work + Programming examples with realistic applications + Starter / skeleton code + Complete working programs + Useful utilities and subroutines + Tips and techniques == Ask about being added to our opt-in list: == == * Early announcement of new courses == == * Early announcement of new techincal papers == == * Early announcement of new promotions == -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Excel to DSORG=PS conversion
Thank you Lizette. I never though of a word table. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Lizette Koehler Sent: Friday, August 21, 2009 12:24 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Excel to DSORG=PS conversion The way I do this is to take excel and put it into a table in WORD. Then convert the word doc to a format I want on the MF and then save as a TXT file. Then up load to the minframe. If you have NSF/DSF in place or can use the ISPF WS Client, then you could edit the txt file on your PC using ISPF. Lizette G'day, I have data given to me in an excel spreadsheet. Is there any way that I can move this data from my PC and MS excel to a sequential file that I can edit with ISPF editor? I've tried a saving as a text file (everything is jammed together on a line). Same thing with a CSV file. I've tried cut and paste column to text file for each column then put them back into order. This was all right for a one timer but I know nothing is ones. Thank you for your assistance. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Any Utilities to Archive Members of a PDS/PDSE - Load Librari es, Not Source
We are currently running CA-Endevor. Management does not feel that it gives them the protection that they are looking for. They are looking for an additional product that would allow them to archive the load modules before any update is made. They would like a product that would copy (archive the current load module before Endevor renames it. They would like the product to keep track of the modules so that they can go back to a previous version without having Endevor involved. Yes I know it is going to cause problems in the long run but what management wants management will get one way or the other. I hope that this additional information will help in explaining my needs. Thank you. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Any Utilities to Archive Members of a PDS/PDSE - Load Librari es, Not Source
Thank you Dave, We have all ready suggested that. However, they want a package that will archive the load modules, from a vendor who can be held accountable if some thing goes wrong. Thank you. Regards, Herman Stocker - Snip- Since you have full control of what the Endevor processors do, just add IEBCOPY and other appropriate steps to the ADD/MOVE processors. -/Snip- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Degraded I/O performance in 1.10?
Sorry Dave, I unlike a number of the listers do not keep references after I have used them. Regards, Herman Stocker - Snip- Herman, Do you have any links to this info? I only find the changes to CA-sizes in the migration guide. -/Snip- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Any Utilities to Archive Members of a PDS/PDSE - Load Libraries, Not Source
G'day, I have been tasked with finding a utility that can archive members of a PDS/PDSE data set, Not the entire data set but individual members. The utility should be able to keep a number of copies or generations of the load modules. I thought I had heard of a product once a long time ago however, have lost all reference to the product and vendor. Thank you for your assistance. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Degraded I/O performance in 1.10?
Hi David, Look into increasing the buffers VSAM index. Some catalog changes have occurred that may be the cause of your slow response. Also SMF and Logrec buffering. Regards, Herman Stocker --- snip--- All, I realize this is a really open ended question. We completed our 1.8 to 1.10 upgrade in June, with no known problems. Everything seems to be running fine. However, I have various people(mostly developers) occasionally complaining that they think the system is slower since the upgrade. Of course, the upgrade gets blamed for everything. By slower, the are referring to their batch jobs, those that do a lot of I/O. Interestingly, several people, who do not work in the same area(and most likely do not talk to each other), asked if file buffering has changed somehow with the upgrade. I tell them, not that I am aware of, and ask them for specifics to research, and in most cases I compare the jobs running before and after the upgrade, and the EXCPs all seem to be inline. So, all I can say is that there is this gut feeling that something isn't quite right, but can't put a finger on it. Has anyone else noticed anything, or have idea's on what to look for? _ Dave Jousma ---/snip--- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Concatenations and blocksizes
I can remember that as late as 1.4 that I had to place the blksize=32760 on the first data set in Steplib dd statement to get around this. - snip- On another list someone found some product doc that still mentioned having the largest blocksize first in a concatenation. While trying to reassure the person I realized how little I actually knew about the topic. So I've got some questions. (Idle curiosity.) 1. How long ago did this requirement disappear? ISTR this restriction--and many others--disappeared with the first release of DFSMS/MVS circa MVS/ESA 4.3. /snip- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Concatenations and blocksizes
Really, I took it out and the job failed. Put it back in and it worked without incident. And yes I still have it in that job to date. Regards, Herman Stocker - snip- Really? As somebody pointed out, the restriction was removed in MVS/ESA 4.3. The only JCL I've seen, since that, with the 32760 specification is that which hadn't been opened up since then. -/snip- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HSM ML2 without Label and NO duplex Copy
Rohit, I know you must have tried something like BLP or NL,2 to get by the label then may be an IEBGENER.. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of ROHIT Sent: Tuesday, August 04, 2009 3:11 PM To: IBM-MAIN@bama.ua.edu Subject: HSM ML2 without Label and NO duplex Copy Hell Guys , We unfortunatley ended up having a 3590 ML2 tape which is giving NO LABEL error and 6000 datasets sitting on it are unreadable, tape ops confirmed that its not being identified by the drives . IOS000I 6503,B3,IOE,02,0600,,**,,DFHSM 468 004914D050205451 0202FF143037 0190 41042300BEFD1312 UNSUPPORTED FORMAT IEC512I I/O ERR 6503, ,NL,DFHSM,DFHSM,DFHSM.HMIGTAPE.DATASET IEC502E R 6503,, ,NL,DFHSM,DFHSM IEC501A M 6503,H00033,SL,,DFHSM,DFHSM,DFHSM.HMIGTAPE.DATASET Tried recycling but again not helping because its not getting identified by system. Can any one advise how to define a new label or any other resoultion , appreciate your input . Thanks in Advance , Rohit IBM -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Delete all members of a PDS with JCL
Delete and define the data set. Regards, Herman Stocker Snip I would like to delete all members of a PDS with JCL but I don't want to specify the members names. (The job will be submitted every day : I don't know the members names and how much members are in this PDS). I don't want to use REXX even if it's easier. /Snip The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Racf And SAS problem
G'day, I have a SAS job that I run without any problems. However, when I had a co-worker run it he has been getting errors. First he got error when starting the job: ICH408I USER(IMSSB ) GROUP(@UNIXAPP) NAME(BARKEY, STEVE ) 609 /u/imssb CL(DIRSRCH ) FID(01E3E2D6D4F0F90016270003) INSUFFICIENT AUTHORITY TO CHDIR ACCESS INTENT(--X) ACCESS ALLOWED(OTHER ---) EFFECTIVE UID(007096) EFFECTIVE GID(007000) This caused the job to fail. This was corrected by deleting the imssb directory in lower case and defining it in upper case - IMSSB. How the job will run to the end of the SAS step and gets the error: ICH408I USER(IMSSB ) GROUP(@UNIXAPP) NAME(BARKEY, STEVE ) 330 /u/IMSSB CL(DIRSRCH ) FID(01E3E2D6D4F0F90016270003) INSUFFICIENT AUTHORITY TO CHDIR ACCESS INTENT(--X) ACCESS ALLOWED(OTHER ---) EFFECTIVE UID(007096) EFFECTIVE GID(007000) Note that the /u/IMSSB/ is in upper case this was required to allow SAS to start executing. At the time of the error SAS has created the report and the CC is 0 for the step. Our security people have not been able to come up with any reason for this error therefore, they can not correct it. Anyone have any suggestions as to why we are getting this RACF error? Thank you. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Racf And SAS problem
Thank you all for your quick responses. Have a great day... Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Walt Farrell Sent: Thursday, June 25, 2009 1:48 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Racf And SAS problem On Thu, 25 Jun 2009 11:43:03 -0400, Stocker, Herman herman.stoc...@avisbudget.com wrote: I have a SAS job that I run without any problems. However, when I had a co-worker run it he has been getting errors. First he got error when starting the job: ICH408I USER(IMSSB ) GROUP(@UNIXAPP) NAME(BARKEY, STEVE ) 609 /u/imssb CL(DIRSRCH ) FID(01E3E2D6D4F0F90016270003) INSUFFICIENT AUTHORITY TO CHDIR ACCESS INTENT(--X) ACCESS ALLOWED(OTHER ---) EFFECTIVE UID(007096) EFFECTIVE GID(007000) The message should be reasonably self-explanatory to those who understands UNIX access control, and if you have such persons at your shop I suggest contating them for assistance. Alternatively, I would hope that the SAS folks could help you. But in a nutshell, either /, /u, or /u/IMSBB has the wrong permissions or the wrong ownership (probably permissions). UNIX users need eXecute authority to traverse directories, and your user is neither the owner of the directory in question, nor is any of his groups the owning group for the directory in question, and so he is using the permissions for other (sort of like UACC in RACF profiles). You need to find that directory, and either change its ownership, or change its permission bits to grant eXecute to other, or connect the user to the right group that owns the directory, or create an ACL (access list) on that directory that grants the user or one of his groups eXecute acess. The UNIX ls command can tell you the permissions of each of those directories. Or there's an AUDITID tool on the UNIX Tools and Toys web page that can perhaps tell you directly based on that FID value. I would guess it's the IMSBB directory that's setup incorrectly, though. You probably want it to have permissions 755 (Read/Write/eXecute for owner, R-X for owning group, R-X for other), which the UNIX chmod command can set for you. For any extended discussion of how this all works (UNIX and file security not SAS specifically), the MVS-OE mailing list is probably a better place. -- Walt Farrell, CISSP IBM STSM, z/OS Security Design -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CLIST equivalent to REXX STRIP
Any one know where to get the Xproc and Xwriter programs now? Thank you. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Shmuel Metz (Seymour J.) Sent: Wednesday, June 10, 2009 8:54 AM To: IBM-MAIN@bama.ua.edu Subject: Re: CLIST equivalent to REXX STRIP In 200906051003.17401.usenet5...@yahoo.com, on 06/05/2009 at 10:03 AM, Gilbert Saint-Flour usenet5...@yahoo.com said: I wrote a bunch of CLISTs until I started writing REXX execs in 1991, but I wrote very few CLISTs since then. I wish a REXX exec could start with PROC, like a CLIST can, so from time to time I write a CLIST just because of PROC. You could use XPROC to parse clist-like parameters. And this is the pure-REXX equivalent : XXX = ' AA-BB ' XXX = STRIP(XXX) Ampersand? -- Shmuel (Seymour J.) Metz, SysProg and JOAT ISO position; see http://patriot.net/~shmuel/resume/brief.html We don't care. We don't have to care, we're Congress. (S877: The Shut up and Eat Your spam act of 2003) -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Application Compiles
We use Endevor from CA now (6 years) before that we used a home grown system of programs (Cobol, Assembler, Clist, Rexx, ISPF (Slib, Tlib member)) and procedures in both cases the system was controlled and maintained by a infrastructure staff. The Development staff only made requests for changes but was unable to make any changes to the procedures that were used to place modules into production. Since going to Endevor the staff has dropped from 3 full time and 2 consultants to 2 full time people that are involved with other projects. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Kreiter, Chuck Sent: Friday, June 05, 2009 8:27 AM To: IBM-MAIN@bama.ua.edu Subject: Application Compiles Our IT department is having a debate about ownership of the compile process, PROC's and invocation utilities (REXX, CLIST, RPF's). I'd like to hear from some other sysprog types on who owns this process in your shop? Thanks, Chuck Kreiter Systems Programming Supervisor State Auto Insurance -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: replacement for proc pds rename function...
Where is JOL available? Thank you. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Clement Clarke Sent: Thursday, April 30, 2009 8:31 AM To: IBM-MAIN@bama.ua.edu Subject: Re: replacement for proc pds rename function... Yes, the only problem with IEHPROGM is that you have to use the Vol keyword, and know where the data set is. You can't use the Catalog to find the file. In Jol, the syntax of the Rename instruction is: Rename old-dsname new-dsname [ALIAS] [VOL volume UNIT unit] ; Examples 1. Rename 'sys1.proclib(TestProg)' (newprog); 2. Rename 'Test.data.set1' 'Old.Test.data'; 3. Rename 'Dept1.*.asm' Dept2.*.asm'; Clem Clarke Chris Mason wrote: Don and responding contributors Maybe I'm being grossly old-fashioned - and I am certainly grossly out-of-date regarding MVS Utilities - but I believe when I wanted to create a batch job[1] in order to rename the member of a partitioned data set, procedure members in procedure libraries included, I used the entirely free - sorry, at no extra cost from IBM - utility IEHPROGM. The appropriate example - found quickly by searching for rename on the Contents web page of the z/OS DFSMSdfp Utilities (SC26-7414-04) manual (to be found in the z/OS V1R10 DFSMS bookshelf): http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/DGT2U130 Specifically 14.5.7 Example 7: Rename a Partitioned Data Set Member. quote //REN JOB ... //STEP1EXEC PGM=IEHPROGM //SYSPRINT DD SYSOUT=A //DD1 DD VOL=SER=22,DISP=OLD,UNIT=disk //SYSINDD * RENAME VOL=disk=22,DSNAME=DATASET,NEWNAME=BC,MEMBER=ABC /* /quote ... (delete text) Chris Mason -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: APF question
Hi Phil, It is an Endevor utility that prevents everyone from selecting their own options. This keeps the control under the Endevor Admins. And out of the applications programmer/consultant. If you feel that this is too greater risk for the benefit gained then ask them to put in a check for the production ID, or authid for execution. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Phil Sidler Sent: Thursday, April 23, 2009 12:44 PM To: IBM-MAIN@bama.ua.edu Subject: APF question Anyone running a program called EDVPARM? A consultant is trying to convince us to install this program to an authorized library with AC(1). Looking at the source concerns me. It appears that you can pass it a program name and parameter list and the program will ATTACHX it. This seems like a big hole to me. What if you pass it IRXJCL for example? Or? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IEHDASDR documentation
Was VIO around when IEHDASDR was in use? Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Jim Mulder Sent: Monday, March 23, 2009 3:29 PM To: IBM-MAIN@bama.ua.edu Subject: IEHDASDR documentation Does anyone have ancient IEHDASDR documentation? I am trying to find out why Standalone Dump generation goes out of its way to prevent VIO from being used for the data set containing the IPL text it provides to ICKDSF via the IPLDD parameter on REFORMAT. ICKDSF currently has no restriction against VIO, and it seems to work ok with VIO. So I am wondering if there was an IEHDASDR restriction against VIO for the FROMDD dataset when doing a PUTIPL operation (this is what SADMP generation used to write the IPL text before ICKDSF existed). Jim Mulder z/OS System Test IBM Corp. Poughkeepsie, NY -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TMON with OMEGAMON Comparison
I can not tell you the differences, however, I will tell you that we have been moving to Omegamon for 3 years now and our applications department has found Omegamon lacking to the point that they have been able to keep TMON in house. IBM has not been able to correct the missing functions in Omegamon. Regards, Herman Stocker Technical Specialist -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Yogeetha balasubramanian Sent: Wednesday, March 11, 2009 8:41 AM To: IBM-MAIN@bama.ua.edu Subject: TMON with OMEGAMON Comparison Hello there !! We are moving from TMON to OMEGAMON . Can someone tell me the difference from your experience between TMON and OMEGAMON that need to be considered ? We are collecting this information Which do you think is a better option. I felt OMEGAMON/CICS got a user friendly interface. Regards Yogs CICS Systems Programmer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: 3584 ATL and ZOS
Check out http://www-03.ibm.com/systems/storage/tape/ts3500/index.html On May 9, 2006, the IBM TotalStorage 3584 Tape Library was renamed to the IBM System Storage TS3500 Tape Library. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Daniel McLaughlin Sent: Thursday, February 19, 2009 2:22 PM To: IBM-MAIN@bama.ua.edu Subject: 3584 ATL and ZOS The NAS and server bunch are upgrading tape technology. They want to hand us a 3584 ATL to use in our ZOS world. So far I haven't found anything to say it's compatible to ZOS. Has anyone out there hooked one of these up to a Z890 and used it with ZOS? Thank youmy SQOTD. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html - -- The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TMON replacement
Since we outsourced to IBM (IGS) they have been trying to get Omegamon working for our applications teams, that is 5 years and we now have both Omegamon and Mainview. YMMV Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of gsg Sent: Thursday, January 29, 2009 11:58 AM To: IBM-MAIN@bama.ua.edu Subject: Re: TMON replacement Does anyone else have any input on a TMON or Omegamon replacement? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Light Weight Printing from Development z/OS 1.8 to HP Laser J ets
Ed, Take a look at XMITIP from Lionel Dyke at http://.lbdsoftware.com/ It's free and easy to set up. Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail: herman.stoc...@avisbudget.com -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Ed Long Sent: Tuesday, December 30, 2008 3:14 PM To: IBM-MAIN@bama.ua.edu Subject: Light Weight Printing from Development z/OS 1.8 to HP Laser Jets Hi all and Happy New Year. I'd like to setup a facility whereby I can print directly from JES2 to an HP Laser Jet type printer without dedicating a printer, buying a printer, or spending time I don't have in INFOPRINT jail. What do you do for z/OS printing in a development context? The requirement is to be able to print small listings locally and conveniently. The difference between today, where we FTP the listing to a PC and print, and tomorrow, is that I want the carriage control characters to be honored. I define small as less than 5000 lines per report and maybe 5 reports per day. I've spent several lovely hours cruising the INFOPRINT website and getting reacquainted with PSF, AFP, and their cousins. Most of this technology qualifies as gross overkill for my needs. I did not see anything directly on point that could be considered lightweight. Is there an easy way to tell Jes2 about a TCPIP connected printer and to have the printer respond to basic CC commands? No fancy forms or checks to be printed, just short reports. Thanks for your ideas, comments, and grand one liners. Edward Long -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CLIST/REXX Philosophy
I like it FB LRECL 80 so I can see it on terminal screen without having to shift right and left. We only support 80 wide displays. If I could get a display that would handle 255 with and still be readable I would go for the VB Lrecl 255. Herman Snip I'm probably going to start a firestorm here, but it's for an internal argument here where I'm consulting. Should REXX/CLIST datasets be RECFM=FB,LRECL=80, or should they be RECFM=VB,LRECL=255? Why? /Snip The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
TSO Logon Screen problem - Nomail Nonotices
G'day List, I am having a problem with the logon screen's Nomail and Nonotice. Since we moved to 1.9 when ever some users logon the Nomail Nonotice is selected. If the S is deleted every thing works correctly until the next logon then the S is back. I can not find out where it is being selected since it does not occur for everyone. Nor dose it seem to mater the logon proc that is used. I appreciate any help you give me. Thank you. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TSO Logon Screen problem - Nomail Nonotices
Hi Mark, They do use Blue Zone, No scripts that I can find. Logoff is normal TSO logoff command. Every time they log off the next time the S is back. Security package is RACF, Nothing in the TSO segment for mail/Nomail or notices/nonotices. I do not believe that UADS is being used but I will check with our Network people. Thank you. Regards, Herman Stocker snip I am having a problem with the logon screen's Nomail and Nonotice. Since we moved to 1.9 when ever some users logon the Nomail Nonotice is selected. If the S is deleted every thing works correctly until the next logon then the S is back. I can not find out where it is being selected since it does not occur for everyone. Nor dose it seem to mater the logon proc that is used. I appreciate any help you give me. Thank you. Stupid question perhaps... but do any of these users logon via session manager with a logon script or any via script from their 3270 emulator or other type of script? Are they logging off normally before the S comes back at next logon or are they being canceled (time out 522 or forced off 622)? What is your security package and is UADS being used? /snip The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Many XEPHON magazines are now available at www.cbttape.org
Thank you... Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Sam Golob Sent: Tuesday, October 28, 2008 12:05 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Many XEPHON magazines are now available at www.cbttape.org Hi Folks, The XEPHON people (www.tcipubs.com or www.xephonusa.com) have now given many of their magazines over to www.cbttape.org to support. Since Xephon (which had been run by the z/Journal people for the past few years) has stopped publication of their magazines, they were concerned about who would support this big body of code, explanations, and articles, into the future. www.cbttape.org has now taken over all support of the Xephon magazines. You can access our initial collection (8 years' worth of all 7 magazines) at: www.cbttape.org/xephon There is no pointer to this URL at the www.cbttape.org site, as yet. Go directly to www.cbttape.org/xephon . Please download a magazine or two (or as many as you want), and let us know what you think. All PDF protections have been removed from the magazines (I think). We wish you good reading, and the best of luck in general. Sincerely,Sam Golob and Sam Knutsonwww.cbttape.org -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ISPF Edit Recovery ON Question.
Hi Howard, Before PF3 issue a save command and see if that will keep the recovery on. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Howard Rifkind Sent: Friday, October 24, 2008 10:17 AM To: IBM-MAIN@BAMA.UA.EDU Subject: ISPF Edit Recovery ON Question. When I edit a file I keep getting the following even when I key in 'RECOVERY ON'. -Warning- The UNDO command is not available until you change your edit profile using the command RECOVERY ON. While in the edit menu I key in PROFILE and get the following: =PROF SAMPJCL (FIXED - 80)RECOVERY OFF WARNNUMBER OFF.. =PROF CAPS OFFHEX OFFNULLS ON STDTABS OFF.. =PROF AUTOSAVE ONAUTONUM OFFAUTOLIST OFFSTATS ON... =PROF PROFILE UNLOCKIMACRO NONEPACK OFFNOTE ON. =PROF HILITE OFF CURSOR FIND... ==MSG -Warning- The UNDO command is not available until you change ==MSG your edit profile using the command RECOVERY ON. I key in RECOVERY ON PF3 out of the member and the next edit I do I'm back to RECOVERY OFF. How can I get RECOVERY ON to stick? Thanks. _ LEGAL NOTICE Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this E-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this E-mail or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately, then delete this message and empty from your trash. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: COBOL abbreviated IF message IGYPS2048-S
There was a difference in the IBM Cobol and the ANS Cobol, I think it was 85 standards. IBM Cobol allow for the abbreviated IF, ANS did not. For IBM to be ANS compliant with the standard the IF was changed. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Greg Shirey Sent: Monday, October 13, 2008 10:51 AM To: IBM-MAIN@BAMA.UA.EDU Subject: COBOL abbreviated IF message IGYPS2048-S Hello all, I'd appreciate some help interpreting COBOL. A programmer was updating a program which contained the following: IF WC-FUNC (SUB) = (X OR Z) AND (WC-AMTUSE (SUB) + WC-AMT-PENDING (SUB)) 0 GO TO G100-FIND-CREDIT-X. and the compiler spit out: IGYPS2048-S An invalid abbreviated relation condition was found. The statement was discarded. The programmer's first issue was that this program compiled clean back in 2006. Our research discovered APAR PK27765 which says: The Enterprise COBOL compiler did not correctly diagnose an incorrect IF statement. and The Enterprise COBOL is changed to correctly diagnose an abbreviated IF statement missing a required logical operator with message IGYPS2048-S. The date on this APAR was late 2006. My interpretation is that the COBOL IF statement was incorrect in 2006, but the compiler did not correctly flag it, and that error has now been fixed. The programmer's second issue became - so what's wrong with the IF statement anyway? I'm kind of stuck on that one. I'd appreciate any feedback. Regards, Greg Shirey Ben E. Keith Co. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
No Source for load modules not linkedited since 1980-90's
We have a large number of modules that have link dates in the 80's and 90's (still running, can that be done on windows and Unix platform?). We want to reverse the modules to be able to go to LE and maybe even make changes. Does any one know of any vendors and/or products on the market that can be used to reverse engineer these modules - in COBOL. I have suggested the disassembler but the development people were not happy with the output, Cobol people do not like assembler, go figure:-) they are not assembler programmers and the disassembled code was unreadable to them. Thank you. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Curiousity question
The function works on 6.8. You have to us the cursor control keys (arrow keys) to move the cursor under the volume serial then press the enter key. Regards, Herman -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Kelman, Tom Sent: Wednesday, October 01, 2008 10:28 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Curiousity question Liz, We are on QuickRef 6.6. I'm using the cursor arrows (not the tab key) to place the cursor under the first character of the volser and then pressing enter. Nothing pops up for me. I am the mainframe capacity planner here, not the z/OS system programmer, so I don't install QuickRef. Could there be some option in QuickRef that needs to be activated to get the detail? Tom Kelman Enterprise Capacity Planner Commerce Bank of Kansas City (816) 760-7632 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Gilbert Cardenas Sent: Wednesday, October 01, 2008 9:05 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Curiousity question Bingo, your memory serves you well Liz. Thanks for the clarification. Gil. On Wed, 1 Oct 2008 08:41:49 -0400, Lizette Koehler [EMAIL PROTECTED] wrote: If you are using QuickRef 6.6 and above (iirc) Then you need to physically move the cursor to the volser and hit enter. It will pop up. You cannot tab to the volume, you have to place the cursor on the volume. Lizette Hi Linda, how do you drill down to a volume's vtoc from QW s=vol* ? All I get are the volumes stats/summary but I see no way of drilling down into the detail. We are on version 6.9. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html * If you wish to communicate securely with Commerce Bank and its affiliates, you must log into your account under Online Services at http://www.commercebank.com or use the Commerce Bank Secure Email Message Center at https://securemail.commercebank.com NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system. * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Display Esoteric values
Short answer - NO. There is a great product on the CBT - SHOWMVS SHOWZOS. This will show the esoteric and the address assigned to it it is free. Regards, Herman Stocker hellois there a console command which will display the esoteric assigned by device type... The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Checking Volume Capacity
Hi Mike, ISPF option #6 on my panel is Command. If you have a TSO command/Clist/REXX/program that can give you volume statistic it will work. What did you do in #6 before? ISMF can be used, QW;;s can be used, I think that DITTO has some function that may give information on the volume. There are some programs on the CBT that give volume stats www.cbttape.org HTH Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mike Baldwin Sent: Tuesday, August 26, 2008 2:16 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Checking Volume Capacity On Fri, 15 Aug 2008 09:20:29 -0700, Howard Rifkind [EMAIL PROTECTED] wrote: I used to be able to check the capacity of a volume somehow using ISPF option #6...I could be wrong. I can't seem to do this anymore. I'm I wrong, or how can I do this now. Any help will be appreciated. Thanks rmm lv 500015 stats Statistics: Number of data sets = 50 Data set recording= ON Volume usage(Kb)= 89855520Use count = 50 Volume capacity = 95367 Percent full = 20 Regards, Mike Baldwin Cartagena Software Ltd. www.cartagena.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PC printing of .txt files containing maiframe listings
Stephen, Check out Lionel B. Dyck web page. There is a function named XMIPIP. Within this package there is a utility XMITIPFE that will do what you want to do. http://www.lbdsoftware.com/ This will take the file you are editing and format it in .txt and other formats then e-mail it to you can print it from the e-mail. HTH Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: about IEWL parameters or so
Hi K, Look into the LET option. IFRC LET allows the RC=8 to replace the member. NOLET will allow a RC=4 and LET can be set to other values. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of K Zafirop Sent: Friday, May 23, 2008 6:52 AM To: IBM-MAIN@BAMA.UA.EDU Subject: about IEWL parameters or so Hi dear all, In IEWL link-edit procedures we have specified for parameters PARM='XREF,LIST,AMODE(31),RMODE(ANY),CALL,MAP,LET'. When we have an RC=8 we have noticed that in 'SAVE OPERATION SUMMMARY' part of LKED sysprint the DISPOSITION REPLACED. I think that the member should not be replaced in such a case. Is there any parameter in order to prevent the replacement of a member in load library after an unsuccessful link-edit? Greetings, K. Zafiropoulos z/Series support engineer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
How to delete members of a PDS that have no data
G'day, I have some members in a PDS that I have not been able to delete. They are Endevor backup members (first character of the name is 'FE'x). I have tried to use LMDELETE, TSO and IDCAMS delete. All have failed. Are there any utilities that will delete the members? Thank you. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How to delete members of a PDS that have no data
Thank you Scott, This time the procedure does not work, I'm getting an RC 8 from the LMDELETE (8 - Member not found). When I copied the data set the members give the error message: IEB189I DIRECTORY ENTRY §YB4I2QK IN BLOCK READ FROM DDNAME INVOL1 IS OUT OF SEQUENCE OR DUPLICATE AT TTR X'001D0D' MBBCCHHR X'03000E0D' Both TSO IDCAMS do not tale a hex character. I will try the PDS command. Thank you. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Scott Barry Sent: Sunday, May 04, 2008 4:45 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: How to delete members of a PDS that have no data Hello, Appears this same question back on Jan 10 2006. The reply thread is pasted below. Scott Barry SBBWorks, Inc. __ *** *** Subject: Does any have a program that can delete non-standard member names from a PDS From: Stocker, Herman snip Reply-To: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU Date: Tue, 10 Jan 2006 15:08:07 -0500 Content-Type: text/plain Hi, We have an Endevor controlled PDS that I copied old backup members into from an old version of Endevor. Since the members are not know by Endevor anymore they will not be deleted. All the members begin with a X'FE' as it's first character. Would anyone have a utility that can be given a hex member name to delete? Or any ideas as to how to delete these unwanted members? Thank you. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: snip Subject: Re: Does any have a program that can delete non-standard member names from a PDS From: John P Kalinich snip Reply-To: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU Date: Tue, 10 Jan 2006 14:13:50 -0600 Content-Type: text/plain The PDS command (CBT file 182) can do this. DELETE X'FE': to delete all members starting with X'FE'. Regards, John Kalinich Computer Sciences Corp Subject: Re: Does any have a program that can delete non-standard member n ames from a PDS From: Stocker, Herman snip Reply-To: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU Date: Wed, 11 Jan 2006 11:32:33 -0500 Content-Type: text/plain Everyone, Thank you. I'm using the rexx from Cletus. Thank you again for all your help. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: snip *** *** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: How to delete members of a PDS that have no data
Update: PDS command does not show them in the member list. In a 3.4, Member list it is show as: .YB4I2QK *No Data Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Xephon, are they still in business?
It is too bad that they only give the option to print the older ones. It would be nice to see a table of contents before having to print the hole thing. A little step backwards. Regards, Herman Stocker -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of AlpTim1 Sent: Monday, April 14, 2008 10:57 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Xephon, are they still in business? Hi! Just in case if you've not noticed. Xephon stopped sending printed issues and it's just pdf format such that each subscriber can download and print it if you like. But...they have've also changed their pricing too for new and existing customers. Check the web site. Cheers Timur -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: FTP from z/VM to z/OS JES Spool
I believe that the JES reader is 80 characters. Can you ftp to a file then use IEBGENR to place it into the spool? Regards, Herman Stocker I am attempting to FTP a file from z/VM which I extracted from the z/VM Spool (PRT) to the z/OS JES Spool. Here are my ftp statements from a code snippet in my code: queue id queue quote site filetype=jes queue mode b queue type e queue quote site lrecl=254 queue put temp_file queue dir queue quit ftp host (exit My problem is that the quote site lrecl=254 is being overridden by the put of the file which is setting it to an LRECL=80 thus: site filetype=jes 200 SITE command was accepted Command: MODE b 200 Data transfer mode is Block Command: TYPE e 200 Representation type is Ebcdic NonPrint Command: site lrecl=254 200 SITE command was accepted Command: SITE VARrecfm 200 SITE command was accepted PORT 172,21,246,100,8,186 200 Port request OK. STOR temp.file 125 Sending Job to JES internal reader FIXrecfm 80 250-It is known to JES as JOB10347 250 Transfer completed (data was truncated) Does anyone have any suggestions on how to overcome this? Lionel B. Dyck, Consultant/Specialist Enterprise Platform Services, Mainframe Engineering KP-IT Enterprise Engineering 925-926-5332 (8-473-5332) | E-Mail: [EMAIL PROTECTED] AIM: lbdyck | Yahoo IM: lbdyck Kaiser Service Credo: Our cause is health. Our passion is service. We're here to make lives better. I never guess. It is a capital mistake to theorize before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. - Sir Arthur Conan Doyle NOTICE TO RECIPIENT: If you are not the intended recipient of this e-mail, you are prohibited from sharing, copying, or otherwise using or disclosing its contents. If you have received this e-mail in error, please notify the sender immediately by reply e-mail and permanently delete this e-mail and any attachments without reading, forwarding or saving them. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CA-Endevor
Yes there is see the C1DEFAUTS for the switch. You can contact CA for more information. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of gsg Sent: Tuesday, March 18, 2008 8:00 PM To: IBM-MAIN@bama.ua.edu Subject: CA-Endevor Does anyone know if there is a way to restrict running compiles in foreground via Endevor? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Any Utility that will allow correction of a corroupt library
G'day, I have a problem that I hope someone has come across before and has or knows of a utility to program that will help me out. I have a corrupt IMS Referral library and it seems to have been corrupted for a long time. I have no good back ups of it. It has over 14,000 members and looking at it there seems to be a very large number that are NG. I am thing that if I can read the first record of each member and compare it to the member name I will be able to delete all the bad members. Then it will be up to the development team to add any missing members. TIA. Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail: [EMAIL PROTECTED] The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Any Utility that will allow correction of a corroupt library
Thanks for the help. I think it was corrupted with a compress share operation or two people/jobs doing a copy. this could of happened any number of times since there are so many members that have been damaged. I am not able to compress or copy it. I am having trouble using superc to locate the good members. I'll Try the PDS command with Verify, after I get it downloaded and installed. Thanks again. Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dave Kopischke Sent: Friday, March 14, 2008 2:29 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Any Utility that will allow correction of a corroupt library On Fri, 14 Mar 2008 11:49:14 -0500, Rick Fochtman wrote: I have a problem that I hope someone has come across before and has or knows of a utility to program that will help me out. I have a corrupt IMS Referral library and it seems to have been corrupted for a long time. I have no good back ups of it. It has over 14,000 members and looking at it there seems to be a very large number that are NG. Any idea how it got corrupted in the first place ??? I had a PDS get reblocked a few weeks ago and that essentially corrupted the PDS. If you have some members corrupted and some not, this might be the same issue. IEBCOPY it to a NEW PDS using DCB parameters with larger block sizes on both input and output and see if you recover the bad ones. You might have to keep trying multiples of LRECL to get a combination that works 100%. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: SDSF Question - How do you change the system log you are look ing at?
Thank to all who answered. SYSID was the command I was looking for. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
SDSF Question - How do you change the system log you are looking at?
G'day, I'm on a 1.4 JES2 system (PLEX) with SDSF what I would like to do is to look at a different system's log file from the one I'm on. I know I did this before but can not find out how I did it again. Thank you. Regards, Herman Stocker The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
WSA - Question
G'day, I'm able to transfer files from the mainframe to the WS one at a time. I have not been able to transfer a file from the PC back to the mainframe. Where/what are the manuals that will give some information on WSA? The error I'm getting is: ISRZ003 An error occurred while transferring the file with the FILEXFER service. The workstation file could not be opened or found. The file may be specified wrong, the path may be specified wrong, the path may not exist, the target disk may be read-only, or the target drive may not exist. The file was not transferred. Thank you. The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: mvs output on pc printer
Look into XMITIP from Lionel Dyck at http://www.lbdsoftware.com/ The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Redbooks - Systems Programming Series
I found the list at: http://www.redbooks.ibm.com/cgi-bin/searchsite.cgi?query=ABCs+of+z/OS+Syste m+Programming+Volume By doing a search on ABCs of z/OS System Programming Volume HTH Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Thompson, Steve Sent: Friday, December 07, 2007 9:48 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Redbooks - Systems Programming Series Well, somehow I managed to lose the copies of this series (IBM Redbooks | ABCs of z/OS System Programming Volume n), and right now in the Redbook area I can only find Vol 1, 2, 9. Does anyone have a link to where the rest of them are, or did they get a name change? In that case, what name should I be searching on? Regards, Steve Thompson -- All opinions expressed by me are my own and may not necessarily reflect those of my employer. -- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ISPF PROBLEM : Initial edit macro set
1. Edit a member click on edit_setting and blank out User session initial macro 2. edit a seq file and blank out Initial Macro Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of esmie moo Sent: Tuesday, October 02, 2007 2:26 PM To: IBM-MAIN@BAMA.UA.EDU Subject: ISPF PROBLEM : Initial edit macro set Good Day Gentle Readers, I am not sure what I did but when I use 3.4 (ISPF) to edit a PDS member I get the message Initial edit macro set. Also, when I go into edit mode in the member an f appears in the command line and displays Required string missing Can anybody please advise me as to how I can go about correcting this problem and not get the message initial edit macro set? Thanks to you all - Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CBT Tape Help
Hi Bob, 1. Have you read the information in the first couple of files on the CBT? 2. What are you using ( program, JCL, ... ) 3. What is the error message that you are getting? Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail:[EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Robert Pelletier Sent: Thursday, September 13, 2007 11:43 AM To: IBM-MAIN@BAMA.UA.EDU Subject: CBT Tape Help Hi All. I am trying to install a CBT module. It looks like this: ./ ADD NAME=ASMJCL // JOB --- 1 //* - * //* * //*1) CHANGE JOB CARD * //*2) CHANGE MACLIB TO YOUR DITTO MACRO LIBRARY NAME * //*3) CHANGE SOURCE TO YOUR DITTO SOURCE LIBRARY NAME * //*4) CHANGE LOADLIB TO AN APF AUTHORIZED LIBRARY NAME* //* * What am I supposed to do? The code is fillwed with ./ everywhere? Thanks all. Have a Nice Day ! Bob Pelletier Connecticut Student Loan Foundation Rocky Hill, Ct. Confidentiality Notice Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this e-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this e-mail or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately and delete this message from your system. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Who is the supplier of Favor?
Thank to all that responded. Have a good weekend. Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail:[EMAIL PROTECTED] The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Who is the supplier of Favor?
Hi List, Can anyone tell me the vendor of Favor. I tried to Google Favor but no luck only hits that I saw was for party favors. Thanks Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail:[EMAIL PROTECTED] The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
IMS Question on disassembling screens formats
G'day List, I've been told that IMS has a utility that can create the source from the modules in the format and/or referal libraries. Would anyone know it's name, or have some JCL they could share with me? Thank you. Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax:1973-496-8201 E-Mail:[EMAIL PROTECTED] The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CMS/DOD idle connection requirements
TPX is from CA. Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail:[EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Rick Fochtman Sent: Monday, June 18, 2007 4:04 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: CMS/DOD idle connection requirements -snip- Can anyone point me to the actual government documents (CMS and DOD) pertaining to the security requirement for unattended (15 minutes) connections. There are two interpretations here: 1) kick the user completely out (CICS TSO) 2) require the user to enter a (Secure Serve Validated) password to continue. The first may be difficult/expensive machine/software wise. The second is monstrously disruptive to the session user. Have these issues been addressed with IBM - CICS/TSO? My VTAM guy tells me idle LU's are also a concern. My concern is productivity of 4 or 5 hundred TSO users and several thousand CICS users. --unsnip Down around the Futures Exchange (CBOT), we used a product called TPX, though I forget the vendor's name. After 15 minutes, we disconnected him from all sessions; after 60 minutes, we terminated the sessions. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
HLASM calling E/Cobol Response time problem
G'day list, We are having a response problem with an E/Cobol module that has just being converted from COBII. It is called from an HLASM module not using LE. Before the conversion the checkpoint were being taken at 20 seconds ( 500 deletes to the data base ( IMS ). Initial run took that to a checkpoint every 20 minutes. We added PREINIT to the JCL this brought the checkpoint time down to 5 minutes. We have been contact with our local IBM support staff, but I was hopping that someone would be able to give us some insight. Thank you. Regards, Herman Stocker Technical Specialist Data Center Operations avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail:[EMAIL PROTECTED] The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Recalling GDG generations
Check the CBT for program RECALL file 183, as well as, other files that have recall programs. www.cbttape.org Regards, Herman Stocker avis budget group Phone:1973-496-4847 fax:1973-496-8201 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Rashmi Nijaguni Mogali Sent: Monday, April 09, 2007 8:11 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Recalling GDG generations Hi all, Is there a way to recall the generations of a GDG which have been archived on the tape? I am talking of a batch method here. I need to recall all the archived generations at one go. Regards, Rashmi CAUTION - Disclaimer * This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS End of Disclaimer INFOSYS*** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
FTP - Where can I find the commands for FTP
G'day, Where are the commands for FTP keep for z/OS? Thank you. Regards, Herman Stocker avis budget group Phone: 1973-496-4847 fax: 1973-496-8201 E-Mail: [EMAIL PROTECTED] The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Max Allocation w/ Space= DD
Hi Dean, The first extent must be able to be allocated on one volume with a maximum of 5 extents. One of the volumes in the pool would have to have 4000 cylinder in a block or be able to get it in 4 additions. HTH Regards, Herman Stocker avis budget group Phone:1973-496-4847 fax:1973-496-8201 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dean Montevago Sent: Friday, December 22, 2006 12:12 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Max Allocation w/ Space= DD Hi, What's the max number of cyl's you can specify for primary/secondary allocations ? I have mod-9's in an SMS pool and tried SPACE=(CYL,(4000,4000),RLSE) and received an E37-00 Extend failed 04034379. The 4379 (17273 dec) says, Allocation failed for all volumes selected for the data set. I searched some of the manuals and can't seem to locate anything. Then again it was our Holiday Party last night, and the fog is a bit thick today. TIA Happy Holidays to All. Dean Dean Montevago Sr. Systems Specialist Visiting Nurse Service of New York (212) 609 - 5596 [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ISPF PF Key Mapping
I user PF21 . . SWAP PREVIOUS and having no problems. On z/OS 1.4 Regards, Herman Stocker avis budget group Phone:1973-496-4847 fax:1973-496-8201 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Chase, John Sent: Thursday, November 30, 2006 10:54 AM To: IBM-MAIN@BAMA.UA.EDU Subject: ISPF PF Key Mapping Hi, All, Having a bit of a problem getting SWAP PREV mapped to PF18. I've previously mapped SWAP NEXT to PF21 and SWAP LIST to PF24 and they both work, but PF18 only returns Command Not Active error message. I've updated both the non-keylist and active keylist settings and the updates show in every logical window, but PF18 doesn't SWAP PREV even though I've exited/re-entered ISPF and logged off/logged on to TSO. This is on z/OS 1.5. What am I missing? -jc- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Maximum DDStatements in a Job and/or Step
Good day, Where can I locate the Maximum number of DDStatements that can be in a job or step. Thank you. Regards, Herman Stocker avis budget group Phone:1973-496-4847 fax:1973-496-8201 E-Mail: [EMAIL PROTECTED] The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Removal From List (fwd)
Looks as if they are using WITE LIST mail scanner and rejecting everyone who is not on their list. I just tried and received the same failure. Regards, Herman Stocker avis budget group Phone:1973-496-4847 fax:1973-496-8201 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of McKown, John Sent: Wednesday, October 18, 2006 11:51 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Removal From List (fwd) -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of McKown, John Sent: Wednesday, October 18, 2006 10:50 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Removal From List (fwd) -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Darren Evans-Young Sent: Wednesday, October 18, 2006 10:48 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Removal From List (fwd) Would someone please forward this email to [EMAIL PROTECTED] They are blocking email from bama.ua.edu. I even tried my gmail account and they are blocking it too, so I can't respond to him. Thanks. Darren Done. UNDONE. They are rejecting my email server too! Likely due to a elided person here who blew off the people who administer RBL. -- John McKown Senior Systems Programmer HealthMarkets Keeping the Promise of Affordable Coverage Administrative Services Group Information Technology This message (including any attachments) contains confidential information intended for a specific individual and purpose, and its content is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this transmission, or taking any action based on it, is strictly prohibited. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Allociated Dataset Question
In 3.4 on the DSN line ISRDDN E \ Regards, Herman Stocker avis budget group Phone: 1973-496-4847 Fax:1973-496-4979 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Howard Rifkind Sent: Thursday, August 17, 2006 11:13 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Allociated Dataset Question I seem to remember some way to determine if a dataset has been allocated to some job from the ISPF 3.4 menu. Can anyone refresh me on this and if not 3.4 then where? Thanks - Get your email and more, right on the new Yahoo.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: SDSF in Batch
Hi Dean, Do you have a large enough buffer for the output? I forget the parm name check the SDSF manual. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax:1973-496-3480 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dean Montevago Sent: Monday, July 17, 2006 11:06 AM To: IBM-MAIN@BAMA.UA.EDU Subject: SDSF in Batch Hi, I'm running the following commands in batch: PRE ** DA On the output I am only getting a portion of the tasks running on the system (no CICS, not all the DB2's, etc.). The manual isn't much help. Anybody have any ideas ? TIA Dean Dean Montevago Sr. Systems Specialist Visiting Nurse Service of New York (212) 609 - 5596 [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: DFDSS Question
Since you do not want the SYS1%%% use the exclude SYS1* to remove them. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax:1973-496-3480 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of McKown, John Sent: Wednesday, May 31, 2006 2:22 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: DFDSS Question -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of willie bunter Sent: Wednesday, May 31, 2006 1:18 PM To: IBM-MAIN@BAMA.UA.EDU Subject: DFDSS Question I want to perform a logical backup of datasets which begin with SYSx.** ( 5 alpha numeric characters which may follow) for example SYSA353B3. If I code SYS*. it picks up anything begining with SYS which includes my SYS1 datasets. Also, I would like to do the same with xxSYSUTx.** Can anybody please suggest how I can go about it? Thanks SYS%.** the % is a match a single character wild card. That is, where you used an x, use a % instead. -- John McKown Senior Systems Programmer HealthMarkets Keeping the Promise of Affordable Coverage Administrative Services Group Information Technology This message (including any attachments) contains confidential information intended for a specific individual and purpose, and its content is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this transmission, or taking any action based on it, is strictly prohibited. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Dumb question?
Assuming.. That the system you are shipping the object/load module to is licensed for all the required run time libraries - the compiler is not being used on the system the object/load module is to be run on there for no license should be required. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax:1973-496-3480 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Tim Hare Sent: Wednesday, May 03, 2006 2:08 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Dumb question? Suppose we licensed a COBOL compiler for one system; would we be violating license restrictions to run the compiles on that one system but ship the resulting object code out to other systems? Specifically thinking of a situation where developers submit their compiles using NJE, and the compile proc's JCL uses DEST=(node,userid) to send the results back to the submitter? I'm sure this is technologically feasible, my question is now that most of us have LE enabled as part of our systems, we no longer license the COBOL run-times, therefore is it legal to do it this way? Tim Hare Senior Systems Programmer Florida Department of Transportation (850) 414-4209 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. The sender's employer is not liable for any loss or damage arising in any way from this message or its attachments. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VSAM file open/close
1 way - in 3.4 list enter ISRDDN en next to the cluster The're a number of programs around called WHOHAS that you can locate with a goole search. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax:1973-496-3480 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Arueira Campos Sent: Friday, March 24, 2006 2:53 PM To: IBM-MAIN@BAMA.UA.EDU Subject: VSAM file open/close Hil all How I see if VSAM file are open or close ??? Have a tools in mainframe for do it ??? Best regards Jorge Arueira Campos CAIXA ECONOMICA FEDERAL SAO PAULO - BRAZIL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Deleting an IODF Work Dataset
Easy way, In ISPF 3.4 panel type DEL next to data set little harder, batch IDCAMS delete Some where in between, use the IODF delete option Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Behalf Of Howard Rifkind Sent: Thursday, February 09, 2006 5:19 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Deleting an IODF Work Dataset I would like to delete an IODF work dataset which I'm using to learn and I know it's a liniar vsam dataset. How do you go about deleting such a dataset. Thanks - Relax. Yahoo! Mail virus scanning helps detect nasty viruses! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Does any have a program that can delete non-standard member n ames from a PDS
Everyone, Thank you. I'm using the rexx from Cletus. Thank you again for all your help. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Does any have a program that can delete non-standard member names from a PDS
Hi, We have an Endevor controlled PDS that I copied old backup members into from an old version of Endevor. Since the members are not know by Endevor anymore they will not be deleted. All the members begin with a X'FE' as it's first character. Would anyone have a utility that can be given a hex member name to delete? Or any ideas as to how to delete these unwanted members? Thank you. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: http://www.isham-research.com/ ?
Have you tried: http://www.isham-research.co.uk/ Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Behalf Of Knutson, Sam Sent: Friday, August 19, 2005 7:15 AM To: IBM-MAIN@BAMA.UA.EDU Subject: http://www.isham-research.com/ ? Hi Phil, What's up? I was just checking links in my presentation for next week and http://www.isham-research.com/ looks like been squatted on my something else. Best Regards, Sam Knutson, GEICO Performance and Availability Management mailto:[EMAIL PROTECTED] (office) 301.986.3574 Any nitwit can understand computers. Many do. - Ted Nelson This email/fax message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this email/fax is prohibited. If you are not the intended recipient, please destroy all paper and electronic copies of the original message. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: SDSF Question - Selection of members to be displayed in the d iffe rent panels
Thanks to all who responded. The answer that solved my problem was PREFIX=** this gave me the selection of jobs by the OWNER that I want to see. The Select command I had not seen before. This look like it will be a winner saving me time and energy. Thank you Skip. Thank you all. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
SDSF Question - Selection of members to be displayed in the diffe rent panels
HI, In SDSF I have set as: PREFIX=* DEST=(ALL) OWNER=HERMAN SORT=End-Date//D End-Time//D SYSNAME= I get a list of job owned by HERMAN in the ST display. How I want to see what is in the hold queue so I go to the H display panel; however, not all the jobs are displayed, ( only the jobs with a prefix of HERMAN are displayed ). If I change the set the prefix to a job name and level the owner the display is empty. Not until I have set the owner to blank are any of the jobs displayed. This also occurs in the output display O Can any one point me to the reason for this behavior? Thank you. Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Synsort
The last time I checked SYNCSORAT did not have their manuals on line. They send a CD with your order, Have you contacted their Support to request a new CD? Regards, Herman Stocker Cendant Car Rental Group Phone: 1973-496-4847 Fax: 1973-496-3480 E-Mail: [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Behalf Of Gerry Anstey Sent: Friday, June 17, 2005 4:32 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Synsort Anyone no where I can access the Syncsort manuals online? Thanks Gerry -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Cobol II and COMP5
Hi, I have been asked to check around and see if there is any known patch/subroutine/exit that will allow a cobol 2 compiled program to use a comp5 field. This can be either free or a $ item. They are looking at a short time work around that they can use until we get to LE and E/Cobol. Thank you for your assistance. Regards, Herman Stocker Cendant Car Rental Group Phone: 973-496-4847 (Parsippany, NJ) email: [EMAIL PROTECTED] -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
