IEFSSNxx change requires IPL?
I've been searching for the answer to this in the docs, but obviously I'm not looking in the right place (yet). If I add something to IEFSSNxx do I need to IPL? Or is there a SET or some other command that will work? Regards, Lindy -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IEFSSNxx change requires IPL?
Lindy Mayfield wrote: I've been searching for the answer to this in the docs, but obviously I'm not looking in the right place (yet). If I add something to IEFSSNxx do I need to IPL? Or is there a SET or some other command that will work? Regards, Lindy SETSSI command might work. -- Mark Jacobs Time Customer Service Tampa, FL The dogmas of the quiet past are inadequate to the stormy present. The occasion is piled high with difficulty, and we must rise to the occasion. We cannot escape history. We will be remembered in spite of ourselves. The fiery trial through which we pass will light us down in honor or dishonor, to the last generation. Abraham Lincoln -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IEFSSNxx change requires IPL?
That's it, thanks! I was expecting something like: SET SSN=00 or something like that. Doh. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Jacobs Sent: 4. maaliskuuta 2008 16:13 To: IBM-MAIN@BAMA.UA.EDU Subject: Re: IEFSSNxx change requires IPL? Lindy Mayfield wrote: I've been searching for the answer to this in the docs, but obviously I'm not looking in the right place (yet). If I add something to IEFSSNxx do I need to IPL? Or is there a SET or some other command that will work? Regards, Lindy SETSSI command might work. -- Mark Jacobs Time Customer Service Tampa, FL The dogmas of the quiet past are inadequate to the stormy present. The occasion is piled high with difficulty, and we must rise to the occasion. We cannot escape history. We will be remembered in spite of ourselves. The fiery trial through which we pass will light us down in honor or dishonor, to the last generation. Abraham Lincoln -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IEFSSNxx change requires IPL?
NOTICE: All information in and attached to the e-mail(s) below may be proprietary, confidential, privileged and otherwise protected from improper or erroneous disclosure. If you are not the sender's intended recipient, you are not authorized to intercept, read, print, retain, copy, forward, or disseminate this message. If you have erroneously received this communication, please notify the sender immediately by phone (704-758-1000) or by e-mail and destroy all copies of this message (electronic, paper, or otherwise). Thank you. Only use the SETSSI commands on the new entries. Larry Gray Large Systems Engineering Lowe's Companies 336-658-7944 -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Lindy Mayfield Sent: Tuesday, March 04, 2008 9:15 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: IEFSSNxx change requires IPL? That's it, thanks! I was expecting something like: SET SSN=00 or something like that. Doh. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Jacobs Sent: 4. maaliskuuta 2008 16:13 To: IBM-MAIN@BAMA.UA.EDU Subject: Re: IEFSSNxx change requires IPL? Lindy Mayfield wrote: I've been searching for the answer to this in the docs, but obviously I'm not looking in the right place (yet). If I add something to IEFSSNxx do I need to IPL? Or is there a SET or some other command that will work? Regards, Lindy SETSSI command might work. -- Mark Jacobs Time Customer Service Tampa, FL -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IEFSSNxx change requires IPL?
Gray, Larry - Larry A [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED]... NOTICE: All information in and attached to the e-mail(s) below may be proprietary, confidential, privileged and otherwise protected from improper or erroneous disclosure. If you are not the sender's intended recipient, you are not authorized to intercept, read, print, retain, copy, forward, or disseminate this message. If you have erroneously received this communication, please notify the sender immediately by phone (704-758-1000) or by e-mail and destroy all copies of this message (electronic, paper, or otherwise). Thank you. Only use the SETSSI commands on the new entries. Larry Gray Not all subsystems support dynamic activation, check the docs. Kees. ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch Airlines) is registered in Amstelveen, The Netherlands, with registered number 33014286 ** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: IEFSSNxx change requires IPL?
On Tue, 4 Mar 2008 15:10:11 +0100, Lindy Mayfield [EMAIL PROTECTED] wrote: I've been searching for the answer to this in the docs, but obviously I'm not looking in the right place (yet). If I add something to IEFSSNxx do I need to IPL? Or is there a SET or some other command that will work? See the command: SETSSI Note that if the subsystem has an initialization routine, it must support dynamic add. If it does not support the dynamic add and has an an initialization routine, you will have to define it and IPL. If you just need a stub then it shouldn't matter. Mark -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group - ZFUS G-ITO mailto:[EMAIL PROTECTED] z/OS Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html