Re: RMM byte usage

[Gonzalo Cengotita]

As Greg pointed, there is no need to write RECORDS(X). If you use the
XREPTEXT DD, the command RPTEXT create only extended extract records

Regards,

Gonzalo Cengotita



*Gonzalo Cengotita*

2015-11-03 3:13 GMT+01:00 Elaine Beal :

> the problem was the DISP=MOD in my message file.
> Got my extract records. Thanks!
> Elaine
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: (External):Re: OMVS mount failure

[J O Skip Robinson]

Too much time on my hands. BPMTEXT EF096058 :

Description: HFS-compat mount, - error attaching aggregate or was found not to
be HFS-compat.
  
Action: Ensure that the HFS compatibility mode aggregate that is being MOUNTed
has a single read-write file system and the file system name is the same as   
the aggregate name (that is, the VSAM Linear Data Set name). This can also
mean that you attempted to move ownership of a zFS sysplex-aware read-write   
file system to a system that does not support zFS sysplex-aware (that is, 
either the target system is prior to z/OS V1R11 or it is z/OS V1R11 but is
running sysplex=off). This is not allowed. Otherwise, contact the service 
representative. A mount of a zFS file system that fails with return code 138  
(ENXIO) and reason code EF096058 can indicate that the file system is already 
mounted on another system that is not in the same sysplex but is sharing DASD 
accessibility. zFS prevents data corruption by not allowing a zFS file system 
to be mounted read-write on two systems that are not in a shared file system  
environment. In this case, verify that the file system is not already mounted 
read-write on another system. zFS prevents a system from writing to a zFS 
aggregate that is mounted read-write on another system.   

.
.
.
J.O.Skip Robinson
Southern California Edison Company
Electric Dragon Team Paddler 
SHARE MVS Program Co-Manager
626-302-7535 Office
323-715-0595 Mobile
jo.skip.robin...@sce.com

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lucas Rosalen
Sent: Tuesday, November 03, 2015 7:20 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: OMVS mount failure

Assuming z/OS 2.1, here: SA23-2284-01z/OS UNIX System Services Messages and 
Codes 

Lucas
On Nov 3, 2015 15:56, "Field, Alan"  wrote:

> You can always do:
>
> exec 'SYS1.SBPXEXEC(bpxmtext)' 'EF096058'
>
> Alan Field
> Systems Engineer Principal
> Blue Cross Blue Shield of MN
>
> 651.662.3546
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Lizette Koehler
> Sent: Tuesday, November 03, 2015 8:54 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: OMVS mount failure
>
> I think in TSO/ISPF Option 6 you can enter BPXMTEXT EF096058
>
> That might provide some info.
>
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List 
> > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richard Pinion
> > Sent: Tuesday, November 03, 2015 7:49 AM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: OMVS mount failure
> >
> > Which manual(s) do I look in to find a mount failure when I receive 
> > the messages below.  This is for z/OS 2.1.
> >
> > BPXF274I FILE SYSTEM Z220.OMVS.ETC 952 FAILED TO MOUNT.
> > RETURN CODE = 008A, REASON CODE = EF096058


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

​In the ​parmlib member ARCCMD00 there's a SETSYS that says:

SETSYS  /* Do not print space usage messages.
  MONITOR(NOSPACE   /* Issue warning messages when:
  BCDS(85 1)/* BCDS is   85% full,
  MCDS(92 1)/* MCDS is   92% full,   <===<<
When threshold reaches 92% I should get a message.
  OCDS(80 1)/* OCDS is   80% full,
   JOURNAL(80 1))   /* Journal is80% full.

Now I only get the message that says it's full...



*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler 
wrote:

> A few questions.
>
> 1) What message are you looking for that you are not seeing?  It helps to
> understand the issue.
> 2) are you looking for this message in SYSLOG, DFHSM Address space, Other?
> 3) Do you have any tools or MPF Exits that might be involved? (Automation
> tools like OPS/MVS or Tivoli)
>
> Thank
>
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> > Behalf Of George Rodriguez
> > Sent: Monday, November 02, 2015 8:23 AM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: DFSMShsm Threshold Message Not Being Displayed
> >
> > I did a search on IBMLink and found APAR # OZ85053 that describes my
> problem to a
> > tee... But the date on the APAR is 85/03/13... I'm running z/OS v1.13.
> >
> > Any help would be appreciated...
> >
> > *George Rodriguez*
> > *Specialist II - IT Solutions*
> > *IT Enterprise Applications*
> > *PX - 47652*
> > *(561) 357-7652 (office)*
> > *(954) 415-7586 (mobile)*
> > *School District of Palm Beach County*
> > *3348 Forest Hill Blvd.*
> > *Room B-251*
> > *West Palm Beach, FL. 33406-5869*
> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >
> > --
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

-- 


*Disclaimer: *Under Florida law, e-mail addresses are public records. If 
you do not want your e-mail address released in response to a public 
records request, do not send electronic mail to this entity. Instead, 
contact this office by phone or in writing.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: OMVS mount failure

[Lucas Rosalen]

Assuming z/OS 2.1, here: SA23-2284-01z/OS UNIX System Services Messages and
Codes 

Lucas
On Nov 3, 2015 15:56, "Field, Alan"  wrote:

> You can always do:
>
> exec 'SYS1.SBPXEXEC(bpxmtext)' 'EF096058'
>
> Alan Field
> Systems Engineer Principal
> Blue Cross Blue Shield of MN
>
> 651.662.3546
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Lizette Koehler
> Sent: Tuesday, November 03, 2015 8:54 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: OMVS mount failure
>
> I think in TSO/ISPF Option 6 you can enter BPXMTEXT EF096058
>
> That might provide some info.
>
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> > On Behalf Of Richard Pinion
> > Sent: Tuesday, November 03, 2015 7:49 AM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: OMVS mount failure
> >
> > Which manual(s) do I look in to find a mount failure when I receive
> > the messages below.  This is for z/OS 2.1.
> >
> > BPXF274I FILE SYSTEM Z220.OMVS.ETC 952 FAILED TO MOUNT.
> > RETURN CODE = 008A, REASON CODE = EF096058
> >
> >
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you are not the named addressee you must not disseminate, distribute or
> copy this e-mail. Please notify the sender immediately by e-mail if you
> have received this e-mail by mistake and delete this e-mail from your
> system. If you are not the intended recipient you are notified that
> disclosing, copying, distributing or taking any action in reliance on the
> contents of this information is strictly prohibited.
>
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: OMVS mount failure

[Richards, Robert B.]

I would suggest that you add the following to a SITE command table:

BPXMTEXT  2  SELECT CMD(BPXMTEXT )

Then you can BP EF096058 from anywhere. Change the 2 to a higher number if you 
would have a conflict with using BP as  a command. 

Or type out the whole thing as BPXMTEXT EF096058. The beauty is being able to 
invoke it from anywhere.

Bob

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Tuesday, November 03, 2015 9:54 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: OMVS mount failure

I think in TSO/ISPF Option 6 you can enter BPXMTEXT EF096058

That might provide some info.

Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Richard Pinion
> Sent: Tuesday, November 03, 2015 7:49 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: OMVS mount failure
> 
> Which manual(s) do I look in to find a mount failure when I receive 
> the messages below.  This is for z/OS 2.1.
> 
> BPXF274I FILE SYSTEM Z220.OMVS.ETC 952 FAILED TO MOUNT.
> RETURN CODE = 008A, REASON CODE = EF096058
> 
> 

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[Lucas Rosalen]

Also make sure you Automation product (and MPFLSTxx of course) isn't
supressing it.
On Nov 3, 2015 16:54, "George Rodriguez" <
george.rodrig...@palmbeachschools.org> wrote:

> I'm looking at it on SYSLOG. That's where the messages displayed before. I
> do have NVAS (Netview Access Services) that might be suppressing the
> message... I'm checking now...
>
>
> *George Rodriguez*
> *Specialist II - IT Solutions*
> *IT Enterprise Applications*
> *PX - 47652*
> *(561) 357-7652 (office)*
> *(954) 415-7586 (mobile)*
> *School District of Palm Beach County*
> *3348 Forest Hill Blvd.*
> *Room B-251*
> *West Palm Beach, FL. 33406-5869*
> *Florida's Only A-Rated Urban District For Eight Consecutive Years*
>
> On Tue, Nov 3, 2015 at 10:43 AM, George Rodriguez <
> george.rodrig...@palmbeachschools.org> wrote:
>
> > ​In the ​parmlib member ARCCMD00 there's a SETSYS that says:
> >
> > SETSYS  /* Do not print space usage messages.
> >   MONITOR(NOSPACE   /* Issue warning messages when:
> >   BCDS(85 1)/* BCDS is   85% full,
> >   MCDS(92 1)/* MCDS is   92% full,   <===<<
> > When threshold reaches 92% I should get a message.
> >   OCDS(80 1)/* OCDS is   80% full,
> >JOURNAL(80 1))   /* Journal is80% full.
> >
> > Now I only get the message that says it's full...
> >
> >
> >
> > *George Rodriguez*
> > *Specialist II - IT Solutions*
> > *IT Enterprise Applications*
> > *PX - 47652*
> > *(561) 357-7652 <%28561%29%20357-7652> (office)*
> > *(954) 415-7586 <%28954%29%20415-7586> (mobile)*
> > *School District of Palm Beach County*
> > *3348 Forest Hill Blvd.*
> > *Room B-251*
> > *West Palm Beach, FL. 33406-5869*
> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >
> > On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler  >
> > wrote:
> >
> >> A few questions.
> >>
> >> 1) What message are you looking for that you are not seeing?  It helps
> to
> >> understand the issue.
> >> 2) are you looking for this message in SYSLOG, DFHSM Address space,
> Other?
> >> 3) Do you have any tools or MPF Exits that might be involved?
> (Automation
> >> tools like OPS/MVS or Tivoli)
> >>
> >> Thank
> >>
> >> Lizette
> >>
> >>
> >> > -Original Message-
> >> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> >> On
> >> > Behalf Of George Rodriguez
> >> > Sent: Monday, November 02, 2015 8:23 AM
> >> > To: IBM-MAIN@LISTSERV.UA.EDU
> >> > Subject: DFSMShsm Threshold Message Not Being Displayed
> >> >
> >> > I did a search on IBMLink and found APAR # OZ85053 that describes my
> >> problem to a
> >> > tee... But the date on the APAR is 85/03/13... I'm running z/OS v1.13.
> >> >
> >> > Any help would be appreciated...
> >> >
> >> > *George Rodriguez*
> >> > *Specialist II - IT Solutions*
> >> > *IT Enterprise Applications*
> >> > *PX - 47652*
> >> > *(561) 357-7652 (office)*
> >> > *(954) 415-7586 (mobile)*
> >> > *School District of Palm Beach County*
> >> > *3348 Forest Hill Blvd.*
> >> > *Room B-251*
> >> > *West Palm Beach, FL. 33406-5869*
> >> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >> >
> >> > --
> >>
> >> --
> >> For IBM-MAIN subscribe / signoff / archive access instructions,
> >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
> >>
> >
> >
>
> --
>
>
> *Disclaimer: *Under Florida law, e-mail addresses are public records. If
> you do not want your e-mail address released in response to a public
> records request, do not send electronic mail to this entity. Instead,
> contact this office by phone or in writing.
>
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: JES2MAIL Log Output to Two SDSF Output Groups - How to Disable One

[George, William@FTB]

Thank you Randy... just what I was looking for!

Bill

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Randy Lists
Sent: Tuesday, November 03, 2015 7:28 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2MAIL Log Output to Two SDSF Output Groups - How to Disable One

Bill,

Apologies for not responding sooner but I did not notice this email to the IBM 
list until this morning.  The messages you are referring to are written through 
the SYSPRINT DD statement.  Generally there is a "//SYSPRINT DD SYSOUT=*" 
statement in the JES2Mail JCL.  You can either remove this statement or dummy 
it out and that should suppress these messages.  The SYSPRINT messages are 
intended to be a summary of the activity that is reported in more detail in the 
LOGFILE sysout.

If need any further information on this, or any other JES2Mail matter, you can 
email us directly at supp...@casisoft.com.

Regards,

Randy Benderman
CASI Software

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of George, William@FTB
Sent: Monday, November 02, 2015 2:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: JES2MAIL Log Output to Two SDSF Output Groups - How to Disable One

We have several jobs that use JES2MAIL to email reports to various users.
The JES2 output (in SDSF) from the step creates two entries and I'm hoping to 
find a means to disable one of them.
The two entries are: (example SDSF entries further below)

1.  The main SYSOUT from the job that includes the JES2MAIL trace log

2.  And a second log that seems to contain all the "Non-ConMsg:" lines
found in the main trace log
Is there a means to disable the 2nd entry JES entry?
Why I find this strange as there is not a DD associated to it coded in the JCL 
to control it.

To attempt to show what I mean, as a test for the below example I ran JCL with 
just the JES2MAIL step.
The two entries were created below within SDSF.  Note: the entries are 
truncated but only the TOTAL-REC and O-GRP-NM are different between the two.

NP   JOBNAME JOBID  CRDATEC DESTNAME TOTAL-REC  O-GRP-NM
 TQ6498ML J0485602 11/02/2015 X LOCAL  1431
 TQ6498ML J0485602 11/02/2015 X LOCAL4
2

LOG EXAMPLE
A portion of the Main SYSOUT trace log.
Note:  items 0017,  0018, 0002 & 0003 below will also be found in the 2nd log
:0015  Min: ZIPService available: None
:0016  Min: SYSIN Command: FILE=DD:MESSAGE
:0017  Min: Non-ConMsg: J2M018  JES2Mail: Message From:  
:0018  Min: Non-ConMsg: J2M015  JES2Mail: Message From:  
:  Min: Message ACCEPTED by Post office: 250 Mail Delivered
:0001  Min: Msg Accepted on Date: Mon, 2 Nov 2015 at 18: 52:52 -
:0002  Min: Non-ConMsg: J2M017  JES2Mail: Message From: 250 Mail Delivered
:0003  Min: Non-ConMsg: J2M007  JES2Mail: Message From: All 1 msgs sent ok
:0004  Min: SYSIN Command: END

The 2nd SDSF entry
J2M018  JES2Mail: Message From: 
J2M015  JES2Mail: Message From: 
J2M017  JES2Mail: Message From: 250 Mail Delivered
J2M007  JES2Mail: Message From: All 1 msgs sent ok

Any insights into a means to disable this or have be part of the main SYSOUT 
entry would be appreciated.

Thanks!
Bill George


__
CONFIDENTIALITY NOTICE: This email from the State of California is for the sole 
use of the intended recipient and may contain confidential and privileged 
information. Any unauthorized review or use, including disclosure or 
distribution, is prohibited. If you are not the intended recipient, please 
contact the sender and destroy all copies of this email.

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

Hi Lizette!

You remember when I started this thread, I found APAR # OZ85053 that
describes my problem. What doesn't make sense to me is that message was
being displayed before... Then all of a sudden, it stopped... I know,
because operations would call me...


*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Tue, Nov 3, 2015 at 12:28 PM, George Rodriguez <
george.rodrig...@palmbeachschools.org> wrote:

> I stand corrected... Netview is the product that suppresses the
> messages... I've already checked MPFLST00 in SYS1.PARMLIB. Yes I have
> DFSMShsm exits:
>
> SETSYS  /* Activate tape volume exit to
>   EXITON(ARCTVEXT)  /* tape management system.
>
> SETSYS  /* Activate ABARS ML2 exclude exit
>   EXITON(ARCM2EXT)  /*
>
> But I think those are standard...
>
> Just one main SYSLOG, all messages go there...
>
>
>
>
> *George Rodriguez*
> *Specialist II - IT Solutions*
> *IT Enterprise Applications*
> *PX - 47652*
> *(561) 357-7652 <%28561%29%20357-7652> (office)*
> *(954) 415-7586 <%28954%29%20415-7586> (mobile)*
> *School District of Palm Beach County*
> *3348 Forest Hill Blvd.*
> *Room B-251*
> *West Palm Beach, FL. 33406-5869*
> *Florida's Only A-Rated Urban District For Eight Consecutive Years*
>
> On Tue, Nov 3, 2015 at 12:17 PM, Elardus Engelbrecht <
> elardus.engelbre...@sita.co.za> wrote:
>
>> George Rodriguez wrote:
>>
>> >I'm looking at it on SYSLOG. That's where the messages displayed before.
>> I do have NVAS (Netview Access Services) that might be suppressing the
>> message... I'm checking now...
>>
>> NVAS suppressing messages? That is news to me. Netview, yes certainly,
>> but NVAS?
>>
>> Check your automation system and MPFLSTxx. Also, check your exits inside
>> that MPFLSTxx.
>>
>> I believe something is suppressing your message. I have not checked that,
>> but do you have any HSM exits?
>>
>> What about your routing codes? Are your routing codes setup correctly so
>> you can see all messages?
>>
>> Groete / Greetings
>> Elardus Engelbrecht
>>
>> --
>> For IBM-MAIN subscribe / signoff / archive access instructions,
>> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>>
>
>

-- 


*Disclaimer: *Under Florida law, e-mail addresses are public records. If 
you do not want your e-mail address released in response to a public 
records request, do not send electronic mail to this entity. Instead, 
contact this office by phone or in writing.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[Lizette Koehler]

And did you check the routing codes for SYSLOG?

I think you can see that under the Display of the CONSOLES.

 
Lizette

> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of George Rodriguez
> Sent: Tuesday, November 03, 2015 11:47 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> 
> Thanks Lizette! I'm having my co-worker check as well, before I open a 
> ticket...
> 
> 
> *George Rodriguez*
> *Specialist II - IT Solutions*
[>] 

 
> On Tue, Nov 3, 2015 at 1:36 PM, Lizette Koehler 
> wrote:
> 
> > There is nothing native to z/OS other than MPF list that I know of
> > that will suppress messages.
> >
> > Something has changed in your environment.
> >
> > If you have displayed the MPF list and did not find any ARC messages
> > in the list If you have tried the quick test I suggested and did not
> > see the message displayed If you do not have any Automation tools like
> > OPS/MVS, AFOPER, Mainview, Tivoli, etc...
> > If you only found the really old PTF, then
> >
> > The next step is probably to contact IBM and have them help you find
> > the culprit.
> >
> > Lizette
> >
> >
> > > -Original Message-
> > > From: IBM Mainframe Discussion List
> > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez
> > > Sent: Tuesday, November 03, 2015 10:33 AM
> > > To: IBM-MAIN@LISTSERV.UA.EDU
> > > Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> > >
> > > Hi Lizette!
> > >
> > > You remember when I started this thread, I found APAR # OZ85053 that
> > describes my
> > > problem. What doesn't make sense to me is that message was being
> > displayed
> > > before... Then all of a sudden, it stopped... I know, because
> > > operations
> > would call
> > > me...
> > >
> > >
> > > *George Rodriguez*
> > > *Specialist II - IT Solutions

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

I stand corrected... Netview is the product that suppresses the messages...
I've already checked MPFLST00 in SYS1.PARMLIB. Yes I have DFSMShsm exits:

SETSYS  /* Activate tape volume exit to
  EXITON(ARCTVEXT)  /* tape management system.

SETSYS  /* Activate ABARS ML2 exclude exit
  EXITON(ARCM2EXT)  /*

But I think those are standard...

Just one main SYSLOG, all messages go there...




*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Tue, Nov 3, 2015 at 12:17 PM, Elardus Engelbrecht <
elardus.engelbre...@sita.co.za> wrote:

> George Rodriguez wrote:
>
> >I'm looking at it on SYSLOG. That's where the messages displayed before.
> I do have NVAS (Netview Access Services) that might be suppressing the
> message... I'm checking now...
>
> NVAS suppressing messages? That is news to me. Netview, yes certainly, but
> NVAS?
>
> Check your automation system and MPFLSTxx. Also, check your exits inside
> that MPFLSTxx.
>
> I believe something is suppressing your message. I have not checked that,
> but do you have any HSM exits?
>
> What about your routing codes? Are your routing codes setup correctly so
> you can see all messages?
>
> Groete / Greetings
> Elardus Engelbrecht
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

-- 


*Disclaimer: *Under Florida law, e-mail addresses are public records. If 
you do not want your e-mail address released in response to a public 
records request, do not send electronic mail to this entity. Instead, 
contact this office by phone or in writing.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

Understood... Thanks Lizette! I'm doing more research now and will post
back my findings of the error...


*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Tue, Nov 3, 2015 at 2:11 PM, Lizette Koehler 
wrote:

> George,
>
> It helps to post your findings, messages, sections of syslog, etc...
> rather than saying "I checked that".
>
> We do not know what you saw when you checked it.
>
> For example, MPF list.  If you did a D MPF, could you post the section (it
> is alphabetic) surrounding where ARC messages would occur along with the
> top and bottom of the display.  The environmental part of MPF and not the
> other messages
>
>
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> > Behalf Of George Rodriguez
> > Sent: Tuesday, November 03, 2015 12:06 PM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> >
> > Yes, I've done that too, just to be certain...
> >
> >
> > *George Rodriguez*
> >
> > On Tue, Nov 3, 2015 at 2:04 PM, Lizette Koehler  >
> > wrote:
> >
> > > And did you check the routing codes for SYSLOG?
> > >
> > > I think you can see that under the Display of the CONSOLES.
> > >
> > >
> > > Lizette
> > >
> > > > -Original Message-
> > > > From: IBM Mainframe Discussion List
> > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez
> > > > Sent: Tuesday, November 03, 2015 11:47 AM
> > > > To: IBM-MAIN@LISTSERV.UA.EDU
> > > > Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> > > >
> > > > Thanks Lizette! I'm having my co-worker check as well, before I open
> > > > a
> > > ticket...
> > > >
> > > >
> > > > *George Rodriguez*
> > > > *Specialist II - IT Solutions*
> > > [>]
> > >
> > >
> > > > On Tue, Nov 3, 2015 at 1:36 PM, Lizette Koehler
> > > >  > > >
> > > > wrote:
> > > >
> > > > > There is nothing native to z/OS other than MPF list that I know of
> > > > > that will suppress messages.
> > > > >
> > > > > Something has changed in your environment.
> > > > >
> > > > > If you have displayed the MPF list and did not find any ARC
> > > > > messages in the list If you have tried the quick test I suggested
> > > > > and did not see the message displayed If you do not have any
> > > > > Automation tools like OPS/MVS, AFOPER, Mainview, Tivoli, etc...
> > > > > If you only found the really old PTF, then
> > > > >
> > > > > The next step is probably to contact IBM and have them help you
> > > > > find the culprit.
> > > > >
> > > > > Lizette
> > > > >
> > > > >
> > > > > > -Original Message-
> > > > > > From: IBM Mainframe Discussion List
> > > > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez
> > > > > > Sent: Tuesday, November 03, 2015 10:33 AM
> > > > > > To: IBM-MAIN@LISTSERV.UA.EDU
> > > > > > Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> > > > > >
> > > > > > Hi Lizette!
> > > > > >
> > > > > > You remember when I started this thread, I found APAR # OZ85053
> > > > > > that
> > > > > describes my
> > > > > > problem. What doesn't make sense to me is that message was being
> > > > > displayed
> > > > > > before... Then all of a sudden, it stopped... I know, because
> > > > > > operations
> > > > > would call
> > > > > > me...
> > > > > >
> > > > > >
> > > > > > *George Rodriguez*
> > > > > > *Specialist II - IT Solutions
> > >
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

-- 


*Disclaimer: *Under Florida law, e-mail addresses are public records. If 
you do not want your e-mail address released in response to a public 
records request, do not send electronic mail to this entity. Instead, 
contact this office by phone or in writing.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[Lizette Koehler]

So as a test

Set your MCDS extremely low so it triggers the message and watch syslog when 
that is done.
Either you will see the message or not.

If not, then something is suppressing it.

You may need to set a SLIP MSG function and see if it in the system.  Or turn 
off all MESSAGE Automation and repeat the test. 

Otherwise, open an SR with IBM and have them help you diagnose this issue. 

Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of George Rodriguez
> Sent: Tuesday, November 03, 2015 9:33 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> 
> I had checked that already...
> 
> 
> *George Rodriguez*
> *Specialist II - IT Solutions*
> *IT Enterprise Applications*
> *PX - 47652*
> *(561) 357-7652 (office)*
> *(954) 415-7586 (mobile)*
> *School District of Palm Beach County*
> *3348 Forest Hill Blvd.*
> *Room B-251*
> *West Palm Beach, FL. 33406-5869*
> *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> 
> On Tue, Nov 3, 2015 at 11:32 AM, George Rodriguez <
> george.rodrig...@palmbeachschools.org> wrote:
> 
> > It's the MCDS file giving the trouble:
> >
> > ARC0149I MONITOR STARTUP NOSPACE NOVOLUME, MCDS(092), ARC0149I
> (CONT.)
> > BCDS(085), OCDS(080), JOURNAL(080)
> >
> >
> > *George Rodriguez*
> > *Specialist II - IT Solutions*
> > *IT Enterprise Applications*
> > *PX - 47652*
> > *(561) 357-7652 <%28561%29%20357-7652> (office)*
> > *(954) 415-7586 <%28954%29%20415-7586> (mobile)* *School District of
> > Palm Beach County*
> > *3348 Forest Hill Blvd.*
> > *Room B-251*
> > *West Palm Beach, FL. 33406-5869*
> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >
> > On Tue, Nov 3, 2015 at 11:26 AM, Lizette Koehler
> > 
> > wrote:
> >
> >> George,
> >>
> >> Issue the following command and paste it for us to see
> >>
> >> F DFHSM,Q SETSYSDFHSM or how you call DFHSM at your site.
> >>
> >> You can just paste the relevant section on the BCDS percentages.  It
> >> is possible someone might have altered your numbers through a dynamic
> >> set command.
> >>
> >> Lizette
> >>
> >>
> >> > -Original Message-
> >> > From: IBM Mainframe Discussion List
> >> > [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> >> On
> >> > Behalf Of George Rodriguez
> >> > Sent: Tuesday, November 03, 2015 8:43 AM
> >> > To: IBM-MAIN@LISTSERV.UA.EDU
> >> > Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> >> >
> >> > ​In the ​parmlib member ARCCMD00 there's a SETSYS that says:
> >> >
> >> > SETSYS  /* Do not print space usage messages.
> >> >   MONITOR(NOSPACE   /* Issue warning messages when:
> >> >   BCDS(85 1)/* BCDS is   85% full,
> >> >   MCDS(92 1)/* MCDS is   92% full,   <===<<
> >> > When threshold reaches 92% I should get a message.
> >> >   OCDS(80 1)/* OCDS is   80% full,
> >> >JOURNAL(80 1))   /* Journal is80% full.
> >> >
> >> > Now I only get the message that says it's full...
> >> >
> >> >
> >> >
> >> > *George Rodriguez*
> >> > *Specialist II - IT Solutions*
> >> > *IT Enterprise Applications*
> >> > *PX - 47652*
> >> > *(561) 357-7652 (office)*
> >> > *(954) 415-7586 (mobile)*
> >> > *School District of Palm Beach County*
> >> > *3348 Forest Hill Blvd.*
> >> > *Room B-251*
> >> > *West Palm Beach, FL. 33406-5869*
> >> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >> >
> >> > On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler <
> >> stars...@mindspring.com>
> >> > wrote:
> >> >
> >> > > A few questions.
> >> > >
> >> > > 1) What message are you looking for that you are not seeing?  It
> >> > > helps to understand the issue.
> >> > > 2) are you looking for this message in SYSLOG, DFHSM Address
> >> > > space,
> >> Other?
> >> > > 3) Do you have any tools or MPF Exits that might be involved?
> >> > > (Automation tools like OPS/MVS or Tivoli)
> >> > >
> >> > > Thank
> >> > >
> >> > > Lizette
> >> > >
> >> > >
> >> > > > -Original Message-
> >> > > > From: IBM Mainframe Discussion List
> >> > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez
> >> > > > Sent: Monday, November 02, 2015 8:23 AM
> >> > > > To: IBM-MAIN@LISTSERV.UA.EDU
> >> > > > Subject: DFSMShsm Threshold Message Not Being Displayed
> >> > > >
> >> > > > I did a search on IBMLink and found APAR # OZ85053 that
> >> > > > describes my
> >> > > problem to a
> >> > > > tee... But the date on the APAR is 85/03/13... I'm running z/OS
> >> v1.13.
> >> > > >
> >> > > > Any help would be appreciated...
> >> > > >
> >> > > > *George Rodriguez*
> >> > > > *Specialist II - IT Solutions*
> >> > > > *IT Enterprise Applications*
> >> > > > *PX - 47652*
> >> > > > *(561) 357-7652 (office)*
> >> > > > *(954) 415-7586 (mobile)*
> >> > > > *School District of Palm Beach County*
> >> > > > *3348 Forest Hill Blvd.*
> 

Fortran, assembly programmers ... NASA needs you – for Voyager • Job For Shane?

[John Mattson]

This is just too sweet. Decisions decisions, retire and spent lots of time
in Italy, or code assembler for NASA. Hmmm let me have a glass of Pinot
grigio and some pasts and think about it. zzz

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[Lizette Koehler]

There is nothing native to z/OS other than MPF list that I know of that will 
suppress messages.

Something has changed in your environment.

If you have displayed the MPF list and did not find any ARC messages in the list
If you have tried the quick test I suggested and did not see the message 
displayed
If you do not have any Automation tools like OPS/MVS, AFOPER, Mainview, Tivoli, 
etc...
If you only found the really old PTF, then

The next step is probably to contact IBM and have them help you find the 
culprit.

Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of George Rodriguez
> Sent: Tuesday, November 03, 2015 10:33 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> 
> Hi Lizette!
> 
> You remember when I started this thread, I found APAR # OZ85053 that 
> describes my
> problem. What doesn't make sense to me is that message was being displayed
> before... Then all of a sudden, it stopped... I know, because operations 
> would call
> me...
> 
> 
> *George Rodriguez*
> *Specialist II - IT Solutions

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IBM Buys cloud brokerage Software Fire Gravitant

[Jerry Whitteridge]

nice

Jerry Whitteridge
Manager Mainframe Systems & Storage
Albertsons - Safeway Inc.
925 738 9443
Corporate Tieline - 89443

If you feel in control
you just aren't going fast enough.




-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Tuesday, November 03, 2015 11:04 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: IBM Buys cloud brokerage Software Fire Gravitant

IBM buys cloud brokerage software firm Gravitant

IBM on Tuesday said it has acquired Gravitant, an Austin, Texas-based developer
of hybrid cloud brokerage software. Terms of the deal were not disclosed.
IBM plans to integrate Gravitant's software capabilities into the IBM Global
Technology Services unit, in an effort to boost its hybrid cloud and enterprise
services.
Gravitant's technology allows businesses to plan, buy and manage -- or "broker"
-- software and computing services from multiple suppliers across hybrid clouds.
The main appeal with this type of software and service brokering is that it
allows mixed environments of private and public clouds to be integrated and
digitally managed as one.



Lizette Koehler

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

"Email Firewall" made the following annotations.
--

Warning: 
All e-mail sent to this address will be received by the corporate e-mail 
system, and is subject to archival and review by someone other than the 
recipient.  This e-mail may contain proprietary information and is intended 
only for the use of the intended recipient(s).  If the reader of this message 
is not the intended recipient(s), you are notified that you have received this 
message in error and that any review, dissemination, distribution or copying of 
this message is strictly prohibited.  If you have received this message in 
error, please notify the sender immediately.. 
 
==

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: JES2MAIL Log Output to Two SDSF Output Groups - How to Disable One

[George, William@FTB]

Seymour

When one does not know the correct vocabulary that maybe a longtime system folk 
might know, one does their best to describe a situation.
I did my best. And thanks to Randy Lists for the describing the situation and 
easy fix.  

All the best
Bill

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Shmuel Metz (Seymour J.)
Sent: Monday, November 02, 2015 5:12 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: JES2MAIL Log Output to Two SDSF Output Groups - How to Disable One

In <984dfc2f94c72c4c9e9acbfd71e4feee32d...@fg1014.ftb.ca.gov>, on
11/02/2015
   at 10:23 PM, "George, William@FTB"  said:

>We have several jobs that use JES2MAIL to email reports to various 
>users. The JES2 output (in SDSF) from the step creates two entries

Are you referring to the job log and the hardcopy log?

>1.  The main SYSOUT from the job that includes the JES2MAIL
>trace log

Please don't invent your own vocabulary. There is no "main SYSOUT".

>2.  And a second log that seems to contain all the "Non-ConMsg:"
>lines found in the main trace log

See above.

You control the characteristics of SYSOUT datasets with OUTPUT statments. In 
your case you need the JESDS keyword to identify the dataset of interest.

>To attempt to show what I mean,

To show what you mean you must identify the JCL and the SDSF commands that you 
used. In particular, what information did you specify to control JES2MAIL?

>The two entries were created below within SDSF.

No; SDSF is only the program that you used to view them.

-- 
 Shmuel (Seymour J.) Metz, SysProg and JOAT
 ISO position; see 
We don't care. We don't have to care, we're Congress.
(S877: The Shut up and Eat Your spam act of 2003)

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

__
CONFIDENTIALITY NOTICE: This email from the State of California is for the sole 
use of the intended recipient and may contain confidential and privileged 
information. Any unauthorized review or use, including disclosure or 
distribution, is prohibited. If you are not the intended recipient, please 
contact the sender and destroy all copies of this email.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: OMVS mount failure

[Richards, Robert B.]

YES. 

I have 137 entries at the moment and use more than half of them regularly. I 
rarely use the JUMP (=) command.

Bob

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Elardus Engelbrecht
Sent: Tuesday, November 03, 2015 12:27 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: OMVS mount failure

Richards, Robert B. wrote:

>I would suggest that you add the following to a SITE command table: 
>BPXMTEXT  2  SELECT CMD(BPXMTEXT )
 
>Then you can BP EF096058 from anywhere. Change the 2 to a higher number if you 
>would have a conflict with using BP as  a command.  

Are you referring to ISPF option =3.9? That is what I call 'short cut commands'.
 
Groete / Greetings
Elardus Engelbrecht

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

IBM Buys cloud brokerage Software Fire Gravitant

[Lizette Koehler]

IBM buys cloud brokerage software firm Gravitant

IBM on Tuesday said it has acquired Gravitant, an Austin, Texas-based developer
of hybrid cloud brokerage software. Terms of the deal were not disclosed.
IBM plans to integrate Gravitant's software capabilities into the IBM Global
Technology Services unit, in an effort to boost its hybrid cloud and enterprise
services.
Gravitant's technology allows businesses to plan, buy and manage -- or "broker"
-- software and computing services from multiple suppliers across hybrid clouds.
The main appeal with this type of software and service brokering is that it
allows mixed environments of private and public clouds to be integrated and
digitally managed as one.



Lizette Koehler

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Integrity of Ziip code was Re: Create zIIP workload

[Rob Scott]

Note that you can invoke SRB code in keys other than zero.

See the KEYVALUE parameter on IEAMSCHD.

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Blaicher, Christopher Y.
Sent: Tuesday, November 3, 2015 8:36 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Integrity of Ziip code was Re: Create zIIP workload

SRB code is entered in KEY ZERO and Supervisor state.
SRB code can issue no SVC's except ABEND and there are limits on the system 
macros you can call.

Chris Blaicher
Technical Architect
Software Development
Syncsort Incorporated
50 Tice Boulevard, Woodcliff Lake, NJ 07677
P: 201-930-8234  |  M: 512-627-3803
E: cblaic...@syncsort.com

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Clark Morris
Sent: Tuesday, November 03, 2015 3:32 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Integrity of Ziip code was Re: Create zIIP workload

On 28 Oct 2015 09:57:20 -0700, in bit.listserv.ibm-main you wrote:

>Given the hoops that one has to go through to run code on a z/IIP, I doubt you 
>can 'casually' get code to run on one.
>
>Also, because any z/IIP processing is SRB mode, there are all those 
>restrictions in addition.
What is the integrity exposure of having basically application code running in 
SRB mode?  What key and state does it run in?

Clark Morris
>
>Chris Blaicher
>Technical Architect
>Software Development
>Syncsort Incorporated
>50 Tice Boulevard, Woodcliff Lake, NJ 07677
>P: 201-930-8234  |  M: 512-627-3803
>E: cblaic...@syncsort.com
>
>-Original Message-
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On 
>Behalf Of R.S.
>Sent: Wednesday, October 28, 2015 10:08 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: Create zIIP workload
>
>W dniu 2015-10-28 o 14:00, Jon Butler pisze:
>> To get a legal copy you must have signed a user agreement (since several 
>> years ago) which precludes the use of specialty engines except as allowed by 
>> IBM.
>What are the terms and conditions for zIIP usage in the user agreement?
>As far as I remeber, there is nothing about my coding.
>
>
>--
>Radoslaw Skorupka
>Lodz, Poland

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN





ATTENTION: -

The information contained in this message (including any files transmitted with 
this message) may contain proprietary, trade secret or other confidential 
and/or legally privileged information. Any pricing information contained in 
this message or in any files transmitted with this message is always 
confidential and cannot be shared with any third parties without prior written 
approval from Syncsort. This message is intended to be read only by the 
individual or entity to whom it is addressed or by their designee. If the 
reader of this message is not the intended recipient, you are on notice that 
any use, disclosure, copying or distribution of this message, in any form, is 
strictly prohibited. If you have received this message in error, please 
immediately notify the sender and/or Syncsort and destroy all copies of this 
message in your possession, custody or control.

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ 
+1 800.966.3270 ■ +1 781.577.4321
Unsubscribe From Commercial Email – unsubscr...@rocketsoftware.com
Manage Your Subscription Preferences - 
http://info.rocketsoftware.com/GlobalSubscriptionManagementEmailFooter_SubscriptionCenter.html
Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy


This communication and any attachments may contain confidential information of 
Rocket Software, Inc. All unauthorized use, disclosure or distribution is 
prohibited. If you are not the intended recipient, please notify Rocket 
Software immediately and destroy all copies of this communication. Thank you.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

s013-68 on JES2 EVENTLOG?

[Paul Gilmartin]

We just got our z/OS 2.2 system up.  So I regression tested an EXEC
that unloads the spool files of a job to UNIX files.

It uses IEBGENER  to copy each DDNAME allocated by SDSF to a UNIX file.
It specifies no DCB attributes on SYSUT2, leaving it to IEBGENER to copy
to SYSUT2 those supplied by SDSF.

I see a spool file I've never seen before: stepname JES2, ddname EVENTLOG,
which fails with:

   7   8 EVENTLOG:  RECFM=U  LRECL=32760  CHARS=,,,
 IEC141I 013-68,IFG0196L,user,$STCTSO1,SYS00196
 IEA995I SYMPTOM DUMP OUTPUT
 SYSTEM COMPLETION CODE=013  REASON CODE=0068
  TIME=14.50.12  SEQ=00083  CPU=  ASID=0063
  PSW AT TIME OF ERROR  075C1000   80A26336  ILC 2  INTC 0D
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW  00A26330 - 4100302C  0A0D010D  A7E5014B

SDSF "SE" opens it OK with profile:
 =PROF> ISFEDIT (VARIABLE - 32760)RECOVERY ONNUMBER OFF

Why is this breaking IEBGENER?  (I don't know how to extract BLKSIZE from SDSF.)

Might it be because IEBGENER might be DCBE-ignorant?

-- gil

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Integrity of Ziip code was Re: Create zIIP workload

[Clark Morris]

On 28 Oct 2015 09:57:20 -0700, in bit.listserv.ibm-main you wrote:

>Given the hoops that one has to go through to run code on a z/IIP, I doubt you 
>can 'casually' get code to run on one.
>
>Also, because any z/IIP processing is SRB mode, there are all those 
>restrictions in addition.
What is the integrity exposure of having basically application code
running in SRB mode?  What key and state does it run in?

Clark Morris
>
>Chris Blaicher
>Technical Architect
>Software Development
>Syncsort Incorporated
>50 Tice Boulevard, Woodcliff Lake, NJ 07677
>P: 201-930-8234  |  M: 512-627-3803
>E: cblaic...@syncsort.com
>
>-Original Message-
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On 
>Behalf Of R.S.
>Sent: Wednesday, October 28, 2015 10:08 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: Create zIIP workload
>
>W dniu 2015-10-28 o 14:00, Jon Butler pisze:
>> To get a legal copy you must have signed a user agreement (since several 
>> years ago) which precludes the use of specialty engines except as allowed by 
>> IBM.
>What are the terms and conditions for zIIP usage in the user agreement?
>As far as I remeber, there is nothing about my coding.
>
>
>--
>Radoslaw Skorupka
>Lodz, Poland

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Java and .jar files on OMVS

[Kirk Wolf]

RE: "On the other hand, scp, which possesses the -r (recursive
directory/subdir copy)..."

recent versions of OpenSSH sftp client now support recursive directory
processing.
This includes IBM Ported Tools OpenSSH 1.3 and Co:Z SFTP 3.5.1  which are
both based on OpenSSH 6.4p1.



Kirk Wolf
Dovetailed Technologies
http://dovetail.com

On Tue, Nov 3, 2015 at 10:36 AM, Jack J. Woehr  wrote:

> Kirk Wolf wrote:
>
>> In the wild, scp and sftp are binary protocols.  Most implementations
>> don't
>> do any conversion for either.
>>
>
> sftp is modeled on ftp where there has always been the switch between text
> and image (binary).
>
> IBM chose to make sftp binary (but there is a switch in the z/OS sftp
>> client to do conversion) and for scp (on both the z/OS client and server)
>> to always do conversion.
>>
>
> Perfectly technically feasible and perfectly tone deaf.  It should have
> been the other way around. In fact, it is.
> OMVS sftp has the text/binary switch. On the other hand, scp, which
> possesses the -r (recursive directory/subdir copy)
> is crippled on OMVS by being only text mode. How absurd and illogical and
> flying in the face of universal usage of scp
> outside OMVS.
>
> I would post a summary of our community conversation on this point over
> the past few days on the m...@openbsd.org
> list for laughs but I don't want to expose IBM to their kidding :)
>
> --
> Jack J. Woehr # Science is more than a body of knowledge. It's a way of
> www.well.com/~jax # thinking, a way of skeptically interrogating the
> universe
> www.softwoehr.com # with a fine understanding of human fallibility. -
> Carl Sagan
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: s013-68 on JES2 EVENTLOG?

[Lizette Koehler]

So not to answer your question,
But I use John McKown's JES2DISK Rexx that uses ISFEXEC and writes to Unix or 
PS datasets.
https://gist.github.com/JohnArchieMckown/b27747d0c4750a258997


Maybe that would work for you.

Lizette

> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Paul Gilmartin
> Sent: Tuesday, November 03, 2015 3:25 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: s013-68 on JES2 EVENTLOG?
> 
> We just got our z/OS 2.2 system up.  So I regression tested an EXEC that 
> unloads the
> spool files of a job to UNIX files.
> 
> It uses IEBGENER  to copy each DDNAME allocated by SDSF to a UNIX file.
> It specifies no DCB attributes on SYSUT2, leaving it to IEBGENER to copy to 
> SYSUT2
> those supplied by SDSF.
> 
> I see a spool file I've never seen before: stepname JES2, ddname EVENTLOG, 
> which
> fails with:
> 
>7   8 EVENTLOG:  RECFM=U  LRECL=32760  CHARS=,,,
>  IEC141I 013-68,IFG0196L,user,$STCTSO1,SYS00196
>  IEA995I SYMPTOM DUMP OUTPUT
>  SYSTEM COMPLETION CODE=013  REASON CODE=0068
>   TIME=14.50.12  SEQ=00083  CPU=  ASID=0063
>   PSW AT TIME OF ERROR  075C1000   80A26336  ILC 2  INTC 0D
> NO ACTIVE MODULE FOUND
> NAME=UNKNOWN
> DATA AT PSW  00A26330 - 4100302C  0A0D010D  A7E5014B
> 
> SDSF "SE" opens it OK with profile:
>  =PROF>   ISFEDIT (VARIABLE - 32760)RECOVERY ONNUMBER
>   OFF
> 
> Why is this breaking IEBGENER?  (I don't know how to extract BLKSIZE from 
> SDSF.)
> 
> Might it be because IEBGENER might be DCBE-ignorant?
> 
> -- gil
> 

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: s013-68 on JES2 EVENTLOG?

[Anthony Thompson]

I'm wondering if you can use PARM='SDB=INPUT' (or YES) to get IEBGENER to copy 
EVENTLOG?

I'd try to test this myself on our sandbox z/OS 2.2 system but we're not 
generating EVENTLOG datasets, even though JES2 checkpoint is at Z22 level and 
JOBDEF SUP_EVENTLOG_SMF is set to NO. Scratching my head there.

Oh, and the SDSF manual doesn't list any field in the JDS (Job Data Set) panel 
that provides block-size information, only RECFM and LRECL, so I don't think 
you can get that.

Ant.

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Paul Gilmartin
Sent: Wednesday, 4 November 2015 7:55 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: s013-68 on JES2 EVENTLOG?

We just got our z/OS 2.2 system up.  So I regression tested an EXEC that 
unloads the spool files of a job to UNIX files.

It uses IEBGENER  to copy each DDNAME allocated by SDSF to a UNIX file.
It specifies no DCB attributes on SYSUT2, leaving it to IEBGENER to copy to 
SYSUT2 those supplied by SDSF.

I see a spool file I've never seen before: stepname JES2, ddname EVENTLOG, 
which fails with:

   7   8 EVENTLOG:  RECFM=U  LRECL=32760  CHARS=,,,
 IEC141I 013-68,IFG0196L,user,$STCTSO1,SYS00196
 IEA995I SYMPTOM DUMP OUTPUT
 SYSTEM COMPLETION CODE=013  REASON CODE=0068
  TIME=14.50.12  SEQ=00083  CPU=  ASID=0063
  PSW AT TIME OF ERROR  075C1000   80A26336  ILC 2  INTC 0D
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW  00A26330 - 4100302C  0A0D010D  A7E5014B

SDSF "SE" opens it OK with profile:
 =PROF> ISFEDIT (VARIABLE - 32760)RECOVERY ONNUMBER OFF

Why is this breaking IEBGENER?  (I don't know how to extract BLKSIZE from SDSF.)

Might it be because IEBGENER might be DCBE-ignorant?

-- gil

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Fortran, assembly programmers ... NASA needs you – for Voyager • Job For Shane?

[CM Poncelet]

Anch'io con pomodori (e con un largo sorriso).

John Mattson wrote:


This is just too sweet. Decisions decisions, retire and spent lots of time
in Italy, or code assembler for NASA. Hmmm let me have a glass of Pinot
grigio and some pasts and think about it. zzz

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN


 



--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: s013-68 on JES2 EVENTLOG?

[Lizette Koehler]

I am not sure how your EXEC worked, so I went to the manuals for information on 
EVENTLOG:

Programs can use Spool Data Set Browse (SDSB) to allocate SPOOL data sets. The 
data set being requested is specified by passing the JES data set name along 
with a SPOOL browse token to MVS™ dynamic allocation. When the data set is 
allocated, the data set can be read using one of two methods:

Using the compatibility interface (DCB, GET).
Using the ACB/RPL interface.

You use the compatibility interface when synchronous sequential access is 
required. You use the ACB/RPL interface when random access to the spool file is 
required, or when asynchronous processing is required.

The EVENTLOG data set is allocated automatically for every batch job, started 
task, and TSO user. It contains machine readable records and is intended to be 
processed by applications. The data set is not considered to be SYSOUT so it 
cannot be accessed by SAPI/PSO/FSS. It is non-printable and non-spinnable. 
EVENTLOG is processed using the Spool Data Set Browse interface.

As mentioned earlier in this section, the Spool Data Set Browse (SDSB) 
interface can be used to access the EVENTLOG data set. The data set name 
supplied to SDSB can be used to control which records in the EVENTLOG data set 
are returned to the application on a GET request. For example, if the 
application wants to retrieve all records in the EVENTLOG data set it can use 
the fully qualified data set name:

 userid.jobname.jobID.D008.EVENTLOG
Additionally, the application can use the following logical data set name to 
retrieve all EVENTLOG records:

 userid.jobname.jobID.EVENTLOG

Additionally, the application can use the following logical data set name to 
retrieve all EVENTLOG records:

 userid.jobname.jobID.EVENTLOG

For more information on specifying a data set name to the SDSB interface, see 
Specifying the Data Set Name (DALDSNAM).


So it looks like there is a jes2 spool dataset name you should be able to 
access, but not with IEBGENER. Something called the Spool Data Set Browse

Lizette


> -Original Message-
> From: Lizette Koehler [mailto:stars...@mindspring.com]
> Sent: Tuesday, November 03, 2015 6:50 PM
> To: 'IBM Mainframe Discussion List'
> Subject: RE: s013-68 on JES2 EVENTLOG?
> 
> So not to answer your question,
> But I use John McKown's JES2DISK Rexx that uses ISFEXEC and writes to Unix or 
> PS
> datasets.
> https://gist.github.com/JohnArchieMckown/b27747d0c4750a258997
> 
> 
> Maybe that would work for you.
> 
> Lizette
> 
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> > On Behalf Of Paul Gilmartin
> > Sent: Tuesday, November 03, 2015 3:25 PM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: s013-68 on JES2 EVENTLOG?
> >
> > We just got our z/OS 2.2 system up.  So I regression tested an EXEC
> > that unloads the spool files of a job to UNIX files.
> >
> > It uses IEBGENER  to copy each DDNAME allocated by SDSF to a UNIX file.
> > It specifies no DCB attributes on SYSUT2, leaving it to IEBGENER to
> > copy to SYSUT2 those supplied by SDSF.
> >
> > I see a spool file I've never seen before: stepname JES2, ddname
> > EVENTLOG, which fails with:
> >
> >7   8 EVENTLOG:  RECFM=U  LRECL=32760  CHARS=,,,
> >  IEC141I 013-68,IFG0196L,user,$STCTSO1,SYS00196
> >  IEA995I SYMPTOM DUMP OUTPUT
> >  SYSTEM COMPLETION CODE=013  REASON CODE=0068
> >   TIME=14.50.12  SEQ=00083  CPU=  ASID=0063
> >   PSW AT TIME OF ERROR  075C1000   80A26336  ILC 2  INTC 0D
> > NO ACTIVE MODULE FOUND
> > NAME=UNKNOWN
> > DATA AT PSW  00A26330 - 4100302C  0A0D010D  A7E5014B
> >
> > SDSF "SE" opens it OK with profile:
> >  =PROF> ISFEDIT (VARIABLE - 32760)RECOVERY ONNUMBER
> > OFF
> >
> > Why is this breaking IEBGENER?  (I don't know how to extract BLKSIZE
> > from SDSF.)
> >
> > Might it be because IEBGENER might be DCBE-ignorant?
> >
> > -- gil
> >

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

New Redbook - Benefits of Configuring More Memory in the z/OS Software Stack

[Ed Gould]

Benefits of Configuring More Memory in the z/OS Software Stack
Revised: October 28, 2015
More details are available at
http://www.redbooks.ibm.com/redpieces/abstracts/redp5238.html?Open

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Fortran, assembly programmers ... NASA needs you – for Voyager • Job For Shane?

[Shane Ginnane]

On Tue, 3 Nov 2015 09:30:38 -0800, John Mattson wrote:

>This is just too sweet. Decisions decisions, retire and spent lots of time
>in Italy, or code assembler for NASA. Hmmm let me have a glass of Pinot
>grigio and some pasts and think about it. zzz

I've no desire to go to Europe, and I prefer wine with a bit more body (a 
decent "big" Aussie Shiraz let's say), but I can certainly empathise with the 
general train of thought.
Let me also cogitate on it whilst I chuck a stick into the surf for the mutt to 
chase ...

No contest.

Shane ...

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Subsys not down while Shutdown

[zos reader]

Hi All,

i am trying to bring our system and i brought all the subsystems and also
came out of syslex and few of subsystems didn't come down.

 SYSLOG   STC01579 +MASTER+   15 EXECUTION  SYS9  SYS9

  TSS9 STC01588 +TSS9  15 EXECUTION  SYS9  SYS9

  PTXMANZ  STC01660 PTXMANZ15 EXECUTION  SYS9  SYS9

  CA7  STC03185 CA715 EXECUTION  SYS9  SYS9


Also the system came to wait state.

Wen i tried to IPL and i cant and below is the message from HMC.


P002DAA7:LPAR4



 Object is busy for task Load by user pzkz1d (pdw01ctxap026[168.94.125.26])
and

the task cannot handle busy objects. See 'Users and Tasks' for more details
or to try to terminate the Load task.


Please assist me how to bring ths tasks down and perform the IPL.


Thanks,

Samat

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

AW: Re: tcpip reserved ports

[Peter Hunkeler]

> Ah! That did the trick. I was playing around with the D,TCPIP,TCIP,... 
> command and could not find what I needed, thanks.


You can also get the list via console command: D TCPIP,TCPIP,N,PORTL


--
Peter Hunkeler



--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: RSU UNZIP issue

[Kurt Quackenbush]

pax: decompress: FSUM6636 not in compressed format


Hmmm... the pax command doesn't recognize the file as an actual pax 
archive.  It sounds to me like perhaps the file was modified somehow 
during or after download.  How did you download the file?  Did you 
ensure it was downloaded, or moved after download, as a binary file?


Kurt Quackenbush -- IBM, SMP/E Development

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

OMVS mount failure

[Richard Pinion]

Which manual(s) do I look in to find a mount failure when I receive 
the messages below.  This is for z/OS 2.1.

BPXF274I FILE SYSTEM Z220.OMVS.ETC 952  
FAILED TO MOUNT.
RETURN CODE = 008A, REASON CODE = EF096058  



_
Netscape.  Just the Net You Need.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: OMVS mount failure

[Lizette Koehler]

I think in TSO/ISPF Option 6 you can enter BPXMTEXT EF096058

That might provide some info.

Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Richard Pinion
> Sent: Tuesday, November 03, 2015 7:49 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: OMVS mount failure
> 
> Which manual(s) do I look in to find a mount failure when I receive the 
> messages
> below.  This is for z/OS 2.1.
> 
> BPXF274I FILE SYSTEM Z220.OMVS.ETC 952
> FAILED TO MOUNT.
> RETURN CODE = 008A, REASON CODE = EF096058
> 
> 

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Opportunity for Mainframers

[Porowski, Ken]

Sounds like one for Steve Comstock if he's still around.



CIT | Ken Porowski | VP Mainframe Engineering | Information Technology | +1 973 
740 5459 (tel) | ken.porow...@cit.com




This email message and any accompanying materials may contain proprietary, 
privileged and confidential information of CIT Group Inc. or its subsidiaries 
or affiliates (collectively, “CIT”), and are intended solely for the 
recipient(s) named above.  If you are not the intended recipient of this 
communication, any use, disclosure, printing, copying or distribution, or 
reliance on the contents, of this communication is strictly prohibited.  CIT 
disclaims any liability for the review, retransmission, dissemination or other 
use of, or the taking of any action in reliance upon, this communication by 
persons other than the intended recipient(s).  If you have received this 
communication in error, please reply to the sender advising of the error in 
transmission, and immediately delete and destroy the communication and any 
accompanying materials.  To the extent permitted by applicable law, CIT and 
others may inspect, review, monitor, analyze, copy, record and retain any 
communications sent from or received at this email address.


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of David Mingee
Sent: Monday, November 02, 2015 7:58 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [IBM-MAIN] Opportunity for Mainframers

Hello,
I hope this is not against the rules.  I know of an opportunity to be an 
instructor for a z/OS Boot Camp class(7 weeks) in Panama City, Panama.It is 
with a reputable training company.  It is scheduled for Feb. 1 thru Mar. 18  
2016.  Pay is about 21K plus expenses.  Please contact me atthe email or phone 
below, if you are interested.  The class covers most every aspect of z/OS and I 
was scheduled for it, but I had to cancel forpersonal reasons.


David Mingee
Mainframe Consulting
9206 Aintree Drive
Indianapolis, IN  46250
317 288-9588  Home317 903-9455  Cell

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Java and .jar files on OMVS

[John McKown]

On Mon, Nov 2, 2015 at 5:15 PM, Paul Gilmartin <
000433f07816-dmarc-requ...@listserv.ua.edu> wrote:

> On Mon, 2 Nov 2015 17:11:14 -0600, John McKown  wrote:
>
> >Or, more simply, install Dovetailed Technologies Co:Z Data Set utilities
> >and use the todsn (for z/OS data sets) or tofile (z/OS UNIX files) to send
> >files and fromdsn/fromfile to get them. And those utilities have options
> >about code conversions to use as well. E.g. "binary" or "translate from
> >ISO-8859-1 to CP-037" and line endings (end with CR, end with LF, end with
> >CRLF, end with LFCR, end with almost anything else you want to specify).
> >
> Politically that may not be more simple.


​True.​



> Or perhaps the price may be deemed
> unacceptable.  (But Kirk is probably willing to be flexible on price.)
>

​Price? It costs $0.00 US to download and use. It only costs money if a
support contract is needed. ​And by download and use, I mean just that. You
go to the site and download it. No registration required. It does not need
any special authorizations in z/OS or UNIX. So it could be downloaded and
installed by anyone who is smart enough to do it. I.e., it doesn't need to
be installed like a z/OS program product. It's just an application.



>
> -- gil
>
>
-- 

Schrodinger's backup: The condition of any backup is unknown until a
restore is attempted.

Yoda of Borg, we are. Futile, resistance is, yes. Assimilated, you will be.

He's about as useful as a wax frying pan.

10 to the 12th power microphones = 1 Megaphone

Maranatha! <><
John McKown

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

It's not suppressed by SYS1.PARMLIB(MPFLST00). I checked all the ARCI
messages and non of them is for the MCDS reaching the threshold of 92%.


*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Tue, Nov 3, 2015 at 10:57 AM, Lucas Rosalen 
wrote:

> Also make sure you Automation product (and MPFLSTxx of course) isn't
> supressing it.
> On Nov 3, 2015 16:54, "George Rodriguez" <
> george.rodrig...@palmbeachschools.org> wrote:
>
> > I'm looking at it on SYSLOG. That's where the messages displayed before.
> I
> > do have NVAS (Netview Access Services) that might be suppressing the
> > message... I'm checking now...
> >
> >
> > *George Rodriguez*
> > *Specialist II - IT Solutions*
> > *IT Enterprise Applications*
> > *PX - 47652*
> > *(561) 357-7652 (office)*
> > *(954) 415-7586 (mobile)*
> > *School District of Palm Beach County*
> > *3348 Forest Hill Blvd.*
> > *Room B-251*
> > *West Palm Beach, FL. 33406-5869*
> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >
> > On Tue, Nov 3, 2015 at 10:43 AM, George Rodriguez <
> > george.rodrig...@palmbeachschools.org> wrote:
> >
> > > ​In the ​parmlib member ARCCMD00 there's a SETSYS that says:
> > >
> > > SETSYS  /* Do not print space usage messages.
> > >   MONITOR(NOSPACE   /* Issue warning messages when:
> > >   BCDS(85 1)/* BCDS is   85% full,
> > >   MCDS(92 1)/* MCDS is   92% full,   <===<<
> > > When threshold reaches 92% I should get a message.
> > >   OCDS(80 1)/* OCDS is   80% full,
> > >JOURNAL(80 1))   /* Journal is80% full.
> > >
> > > Now I only get the message that says it's full...
> > >
> > >
> > >
> > > *George Rodriguez*
> > > *Specialist II - IT Solutions*
> > > *IT Enterprise Applications*
> > > *PX - 47652*
> > > *(561) 357-7652 <%28561%29%20357-7652> (office)*
> > > *(954) 415-7586 <%28954%29%20415-7586> (mobile)*
> > > *School District of Palm Beach County*
> > > *3348 Forest Hill Blvd.*
> > > *Room B-251*
> > > *West Palm Beach, FL. 33406-5869*
> > > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> > >
> > > On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler <
> stars...@mindspring.com
> > >
> > > wrote:
> > >
> > >> A few questions.
> > >>
> > >> 1) What message are you looking for that you are not seeing?  It helps
> > to
> > >> understand the issue.
> > >> 2) are you looking for this message in SYSLOG, DFHSM Address space,
> > Other?
> > >> 3) Do you have any tools or MPF Exits that might be involved?
> > (Automation
> > >> tools like OPS/MVS or Tivoli)
> > >>
> > >> Thank
> > >>
> > >> Lizette
> > >>
> > >>
> > >> > -Original Message-
> > >> > From: IBM Mainframe Discussion List [mailto:
> IBM-MAIN@LISTSERV.UA.EDU]
> > >> On
> > >> > Behalf Of George Rodriguez
> > >> > Sent: Monday, November 02, 2015 8:23 AM
> > >> > To: IBM-MAIN@LISTSERV.UA.EDU
> > >> > Subject: DFSMShsm Threshold Message Not Being Displayed
> > >> >
> > >> > I did a search on IBMLink and found APAR # OZ85053 that describes my
> > >> problem to a
> > >> > tee... But the date on the APAR is 85/03/13... I'm running z/OS
> v1.13.
> > >> >
> > >> > Any help would be appreciated...
> > >> >
> > >> > *George Rodriguez*
> > >> > *Specialist II - IT Solutions*
> > >> > *IT Enterprise Applications*
> > >> > *PX - 47652*
> > >> > *(561) 357-7652 (office)*
> > >> > *(954) 415-7586 (mobile)*
> > >> > *School District of Palm Beach County*
> > >> > *3348 Forest Hill Blvd.*
> > >> > *Room B-251*
> > >> > *West Palm Beach, FL. 33406-5869*
> > >> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> > >> >
> > >> > --
> > >>
> > >> --
> > >> For IBM-MAIN subscribe / signoff / archive access instructions,
> > >> send email to lists...@listserv.ua.edu with the message: INFO
> IBM-MAIN
> > >>
> > >
> > >
> >
> > --
> >
> >
> > *Disclaimer: *Under Florida law, e-mail addresses are public records. If
> > you do not want your e-mail address released in response to a public
> > records request, do not send electronic mail to this entity. Instead,
> > contact this office by phone or in writing.
> >
> >
> > --
> > For IBM-MAIN subscribe / signoff / archive access instructions,
> > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
> >
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

-- 

Re: Java and .jar files on OMVS

[Kirk Wolf]

In the wild, scp and sftp are binary protocols.  Most implementations don't
do any conversion for either.
The problem is that there isn't anything in the packet specs for these
protocols to indicate conversion, codepages, etc.

IBM chose to make sftp binary (but there is a switch in the z/OS sftp
client to do conversion) and for scp (on both the z/OS client and server)
to always do conversion.
IBM's scp and sftp implementations also don't support MVS data sets, JES
spool files, etc, etc.

For a complete z/OS implementation of SFTP for z/OS, you can use Co:Z SFTP
  with IBM Ported Tools OpenSSH.


Kirk Wolf
Dovetailed Technologies
http://dovetail.com

On Mon, Nov 2, 2015 at 5:12 PM, Paul Gilmartin <
000433f07816-dmarc-requ...@listserv.ua.edu> wrote:

> On Mon, 2 Nov 2015 16:07:13 -0700, Jack J. Woehr wrote:
> >
> >> What can you cite for your notion of "the original design"
> >The -r switch for copying whole directory structures.
> >
> >Whereas ftp/sftp has always had the binary/text dichotomy, scp has never
> had such a switch.
> >
> >Ergo, it's designed for binary transfer.
> >
> Did you read the article about Goodman?
>
> At least the default for ftp has always been to convert from the character
> set of
> the originating system to that of the receiving system.  Scp is merely
> agreeing
> with the default behavior of ftp.
>
> Use sftp.
>
> -- gil
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

The message that I used to get was:

*ARC0909E* *(MCDS* *CONTROL* *|* *BCDS* *CONTROL* *|* *OCDS* *CONTROL*
*|* *JOURNAL)* *DATA* *SET*
 *IS* *ABOUT* *percent**%* *FULL*

​The *percent%* value was 92%...

Thanks!

*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Tue, Nov 3, 2015 at 11:08 AM, George Rodriguez <
george.rodrig...@palmbeachschools.org> wrote:

> It's not suppressed by SYS1.PARMLIB(MPFLST00). I checked all the ARCI
> messages and non of them is for the MCDS reaching the threshold of 92%.
>
>
> *George Rodriguez*
> *Specialist II - IT Solutions*
> *IT Enterprise Applications*
> *PX - 47652*
> *(561) 357-7652 <%28561%29%20357-7652> (office)*
> *(954) 415-7586 <%28954%29%20415-7586> (mobile)*
> *School District of Palm Beach County*
> *3348 Forest Hill Blvd.*
> *Room B-251*
> *West Palm Beach, FL. 33406-5869*
> *Florida's Only A-Rated Urban District For Eight Consecutive Years*
>
> On Tue, Nov 3, 2015 at 10:57 AM, Lucas Rosalen 
> wrote:
>
>> Also make sure you Automation product (and MPFLSTxx of course) isn't
>> supressing it.
>> On Nov 3, 2015 16:54, "George Rodriguez" <
>> george.rodrig...@palmbeachschools.org> wrote:
>>
>> > I'm looking at it on SYSLOG. That's where the messages displayed
>> before. I
>> > do have NVAS (Netview Access Services) that might be suppressing the
>> > message... I'm checking now...
>> >
>> >
>> > *George Rodriguez*
>> > *Specialist II - IT Solutions*
>> > *IT Enterprise Applications*
>> > *PX - 47652*
>> > *(561) 357-7652 (office)*
>> > *(954) 415-7586 (mobile)*
>> > *School District of Palm Beach County*
>> > *3348 Forest Hill Blvd.*
>> > *Room B-251*
>> > *West Palm Beach, FL. 33406-5869*
>> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
>> >
>> > On Tue, Nov 3, 2015 at 10:43 AM, George Rodriguez <
>> > george.rodrig...@palmbeachschools.org> wrote:
>> >
>> > > ​In the ​parmlib member ARCCMD00 there's a SETSYS that says:
>> > >
>> > > SETSYS  /* Do not print space usage messages.
>> > >   MONITOR(NOSPACE   /* Issue warning messages when:
>> > >   BCDS(85 1)/* BCDS is   85% full,
>> > >   MCDS(92 1)/* MCDS is   92% full,
>>  <===<<
>> > > When threshold reaches 92% I should get a message.
>> > >   OCDS(80 1)/* OCDS is   80% full,
>> > >JOURNAL(80 1))   /* Journal is80% full.
>> > >
>> > > Now I only get the message that says it's full...
>> > >
>> > >
>> > >
>> > > *George Rodriguez*
>> > > *Specialist II - IT Solutions*
>> > > *IT Enterprise Applications*
>> > > *PX - 47652*
>> > > *(561) 357-7652 <%28561%29%20357-7652> (office)*
>> > > *(954) 415-7586 <%28954%29%20415-7586> (mobile)*
>> > > *School District of Palm Beach County*
>> > > *3348 Forest Hill Blvd.*
>> > > *Room B-251*
>> > > *West Palm Beach, FL. 33406-5869*
>> > > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
>> > >
>> > > On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler <
>> stars...@mindspring.com
>> > >
>> > > wrote:
>> > >
>> > >> A few questions.
>> > >>
>> > >> 1) What message are you looking for that you are not seeing?  It
>> helps
>> > to
>> > >> understand the issue.
>> > >> 2) are you looking for this message in SYSLOG, DFHSM Address space,
>> > Other?
>> > >> 3) Do you have any tools or MPF Exits that might be involved?
>> > (Automation
>> > >> tools like OPS/MVS or Tivoli)
>> > >>
>> > >> Thank
>> > >>
>> > >> Lizette
>> > >>
>> > >>
>> > >> > -Original Message-
>> > >> > From: IBM Mainframe Discussion List [mailto:
>> IBM-MAIN@LISTSERV.UA.EDU]
>> > >> On
>> > >> > Behalf Of George Rodriguez
>> > >> > Sent: Monday, November 02, 2015 8:23 AM
>> > >> > To: IBM-MAIN@LISTSERV.UA.EDU
>> > >> > Subject: DFSMShsm Threshold Message Not Being Displayed
>> > >> >
>> > >> > I did a search on IBMLink and found APAR # OZ85053 that describes
>> my
>> > >> problem to a
>> > >> > tee... But the date on the APAR is 85/03/13... I'm running z/OS
>> v1.13.
>> > >> >
>> > >> > Any help would be appreciated...
>> > >> >
>> > >> > *George Rodriguez*
>> > >> > *Specialist II - IT Solutions*
>> > >> > *IT Enterprise Applications*
>> > >> > *PX - 47652*
>> > >> > *(561) 357-7652 (office)*
>> > >> > *(954) 415-7586 (mobile)*
>> > >> > *School District of Palm Beach County*
>> > >> > *3348 Forest Hill Blvd.*
>> > >> > *Room B-251*
>> > >> > *West Palm Beach, FL. 33406-5869*
>> > >> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
>> > >> >
>> > >> > --
>> > >>
>> > >>
>> --
>> > >> For IBM-MAIN subscribe / signoff / archive access instructions,
>> > >> send email to 

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

It's the MCDS file giving the trouble:

ARC0149I MONITOR STARTUP NOSPACE NOVOLUME, MCDS(092),
ARC0149I (CONT.) BCDS(085), OCDS(080), JOURNAL(080)


*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Tue, Nov 3, 2015 at 11:26 AM, Lizette Koehler 
wrote:

> George,
>
> Issue the following command and paste it for us to see
>
> F DFHSM,Q SETSYSDFHSM or how you call DFHSM at your site.
>
> You can just paste the relevant section on the BCDS percentages.  It is
> possible someone might have altered your numbers through a dynamic set
> command.
>
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> > Behalf Of George Rodriguez
> > Sent: Tuesday, November 03, 2015 8:43 AM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> >
> > ​In the ​parmlib member ARCCMD00 there's a SETSYS that says:
> >
> > SETSYS  /* Do not print space usage messages.
> >   MONITOR(NOSPACE   /* Issue warning messages when:
> >   BCDS(85 1)/* BCDS is   85% full,
> >   MCDS(92 1)/* MCDS is   92% full,   <===<<
> > When threshold reaches 92% I should get a message.
> >   OCDS(80 1)/* OCDS is   80% full,
> >JOURNAL(80 1))   /* Journal is80% full.
> >
> > Now I only get the message that says it's full...
> >
> >
> >
> > *George Rodriguez*
> > *Specialist II - IT Solutions*
> > *IT Enterprise Applications*
> > *PX - 47652*
> > *(561) 357-7652 (office)*
> > *(954) 415-7586 (mobile)*
> > *School District of Palm Beach County*
> > *3348 Forest Hill Blvd.*
> > *Room B-251*
> > *West Palm Beach, FL. 33406-5869*
> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >
> > On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler  >
> > wrote:
> >
> > > A few questions.
> > >
> > > 1) What message are you looking for that you are not seeing?  It helps
> > > to understand the issue.
> > > 2) are you looking for this message in SYSLOG, DFHSM Address space,
> Other?
> > > 3) Do you have any tools or MPF Exits that might be involved?
> > > (Automation tools like OPS/MVS or Tivoli)
> > >
> > > Thank
> > >
> > > Lizette
> > >
> > >
> > > > -Original Message-
> > > > From: IBM Mainframe Discussion List
> > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez
> > > > Sent: Monday, November 02, 2015 8:23 AM
> > > > To: IBM-MAIN@LISTSERV.UA.EDU
> > > > Subject: DFSMShsm Threshold Message Not Being Displayed
> > > >
> > > > I did a search on IBMLink and found APAR # OZ85053 that describes my
> > > problem to a
> > > > tee... But the date on the APAR is 85/03/13... I'm running z/OS
> v1.13.
> > > >
> > > > Any help would be appreciated...
> > > >
> > > > *George Rodriguez*
> > > > *Specialist II - IT Solutions*
> > > > *IT Enterprise Applications*
> > > > *PX - 47652*
> > > > *(561) 357-7652 (office)*
> > > > *(954) 415-7586 (mobile)*
> > > > *School District of Palm Beach County*
> > > > *3348 Forest Hill Blvd.*
> > > > *Room B-251*
> > > > *West Palm Beach, FL. 33406-5869*
> > > > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> > > >
> > > > --
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

-- 


*Disclaimer: *Under Florida law, e-mail addresses are public records. If 
you do not want your e-mail address released in response to a public 
records request, do not send electronic mail to this entity. Instead, 
contact this office by phone or in writing.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFSMShsm Threshold Message Not Being Displayed

[George Rodriguez]

That's what I'm checking now...


*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*

On Tue, Nov 3, 2015 at 10:57 AM, Lucas Rosalen 
wrote:

> Also make sure you Automation product (and MPFLSTxx of course) isn't
> supressing it.
> On Nov 3, 2015 16:54, "George Rodriguez" <
> george.rodrig...@palmbeachschools.org> wrote:
>
> > I'm looking at it on SYSLOG. That's where the messages displayed before.
> I
> > do have NVAS (Netview Access Services) that might be suppressing the
> > message... I'm checking now...
> >
> >
> > *George Rodriguez*
> > *Specialist II - IT Solutions*
> > *IT Enterprise Applications*
> > *PX - 47652*
> > *(561) 357-7652 (office)*
> > *(954) 415-7586 (mobile)*
> > *School District of Palm Beach County*
> > *3348 Forest Hill Blvd.*
> > *Room B-251*
> > *West Palm Beach, FL. 33406-5869*
> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> >
> > On Tue, Nov 3, 2015 at 10:43 AM, George Rodriguez <
> > george.rodrig...@palmbeachschools.org> wrote:
> >
> > > ​In the ​parmlib member ARCCMD00 there's a SETSYS that says:
> > >
> > > SETSYS  /* Do not print space usage messages.
> > >   MONITOR(NOSPACE   /* Issue warning messages when:
> > >   BCDS(85 1)/* BCDS is   85% full,
> > >   MCDS(92 1)/* MCDS is   92% full,   <===<<
> > > When threshold reaches 92% I should get a message.
> > >   OCDS(80 1)/* OCDS is   80% full,
> > >JOURNAL(80 1))   /* Journal is80% full.
> > >
> > > Now I only get the message that says it's full...
> > >
> > >
> > >
> > > *George Rodriguez*
> > > *Specialist II - IT Solutions*
> > > *IT Enterprise Applications*
> > > *PX - 47652*
> > > *(561) 357-7652 <%28561%29%20357-7652> (office)*
> > > *(954) 415-7586 <%28954%29%20415-7586> (mobile)*
> > > *School District of Palm Beach County*
> > > *3348 Forest Hill Blvd.*
> > > *Room B-251*
> > > *West Palm Beach, FL. 33406-5869*
> > > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> > >
> > > On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler <
> stars...@mindspring.com
> > >
> > > wrote:
> > >
> > >> A few questions.
> > >>
> > >> 1) What message are you looking for that you are not seeing?  It helps
> > to
> > >> understand the issue.
> > >> 2) are you looking for this message in SYSLOG, DFHSM Address space,
> > Other?
> > >> 3) Do you have any tools or MPF Exits that might be involved?
> > (Automation
> > >> tools like OPS/MVS or Tivoli)
> > >>
> > >> Thank
> > >>
> > >> Lizette
> > >>
> > >>
> > >> > -Original Message-
> > >> > From: IBM Mainframe Discussion List [mailto:
> IBM-MAIN@LISTSERV.UA.EDU]
> > >> On
> > >> > Behalf Of George Rodriguez
> > >> > Sent: Monday, November 02, 2015 8:23 AM
> > >> > To: IBM-MAIN@LISTSERV.UA.EDU
> > >> > Subject: DFSMShsm Threshold Message Not Being Displayed
> > >> >
> > >> > I did a search on IBMLink and found APAR # OZ85053 that describes my
> > >> problem to a
> > >> > tee... But the date on the APAR is 85/03/13... I'm running z/OS
> v1.13.
> > >> >
> > >> > Any help would be appreciated...
> > >> >
> > >> > *George Rodriguez*
> > >> > *Specialist II - IT Solutions*
> > >> > *IT Enterprise Applications*
> > >> > *PX - 47652*
> > >> > *(561) 357-7652 (office)*
> > >> > *(954) 415-7586 (mobile)*
> > >> > *School District of Palm Beach County*
> > >> > *3348 Forest Hill Blvd.*
> > >> > *Room B-251*
> > >> > *West Palm Beach, FL. 33406-5869*
> > >> > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> > >> >
> > >> > --
> > >>
> > >> --
> > >> For IBM-MAIN subscribe / signoff / archive access instructions,
> > >> send email to lists...@listserv.ua.edu with the message: INFO
> IBM-MAIN
> > >>
> > >
> > >
> >
> > --
> >
> >
> > *Disclaimer: *Under Florida law, e-mail addresses are public records. If
> > you do not want your e-mail address released in response to a public
> > records request, do not send electronic mail to this entity. Instead,
> > contact this office by phone or in writing.
> >
> >
> > --
> > For IBM-MAIN subscribe / signoff / archive access instructions,
> > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
> >
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>

-- 


*Disclaimer: *Under Florida law, e-mail addresses are public records. If 
you do not want your e-mail address released in 

Re: DFSMShsm Threshold Message Not Being Displayed

[Lizette Koehler]

George,

Issue the following command and paste it for us to see

F DFHSM,Q SETSYSDFHSM or how you call DFHSM at your site.

You can just paste the relevant section on the BCDS percentages.  It is 
possible someone might have altered your numbers through a dynamic set command.

Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of George Rodriguez
> Sent: Tuesday, November 03, 2015 8:43 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: DFSMShsm Threshold Message Not Being Displayed
> 
> ​In the ​parmlib member ARCCMD00 there's a SETSYS that says:
> 
> SETSYS  /* Do not print space usage messages.
>   MONITOR(NOSPACE   /* Issue warning messages when:
>   BCDS(85 1)/* BCDS is   85% full,
>   MCDS(92 1)/* MCDS is   92% full,   <===<<
> When threshold reaches 92% I should get a message.
>   OCDS(80 1)/* OCDS is   80% full,
>JOURNAL(80 1))   /* Journal is80% full.
> 
> Now I only get the message that says it's full...
> 
> 
> 
> *George Rodriguez*
> *Specialist II - IT Solutions*
> *IT Enterprise Applications*
> *PX - 47652*
> *(561) 357-7652 (office)*
> *(954) 415-7586 (mobile)*
> *School District of Palm Beach County*
> *3348 Forest Hill Blvd.*
> *Room B-251*
> *West Palm Beach, FL. 33406-5869*
> *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> 
> On Mon, Nov 2, 2015 at 1:18 PM, Lizette Koehler 
> wrote:
> 
> > A few questions.
> >
> > 1) What message are you looking for that you are not seeing?  It helps
> > to understand the issue.
> > 2) are you looking for this message in SYSLOG, DFHSM Address space, Other?
> > 3) Do you have any tools or MPF Exits that might be involved?
> > (Automation tools like OPS/MVS or Tivoli)
> >
> > Thank
> >
> > Lizette
> >
> >
> > > -Original Message-
> > > From: IBM Mainframe Discussion List
> > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez
> > > Sent: Monday, November 02, 2015 8:23 AM
> > > To: IBM-MAIN@LISTSERV.UA.EDU
> > > Subject: DFSMShsm Threshold Message Not Being Displayed
> > >
> > > I did a search on IBMLink and found APAR # OZ85053 that describes my
> > problem to a
> > > tee... But the date on the APAR is 85/03/13... I'm running z/OS v1.13.
> > >
> > > Any help would be appreciated...
> > >
> > > *George Rodriguez*
> > > *Specialist II - IT Solutions*
> > > *IT Enterprise Applications*
> > > *PX - 47652*
> > > *(561) 357-7652 (office)*
> > > *(954) 415-7586 (mobile)*
> > > *School District of Palm Beach County*
> > > *3348 Forest Hill Blvd.*
> > > *Room B-251*
> > > *West Palm Beach, FL. 33406-5869*
> > > *Florida's Only A-Rated Urban District For Eight Consecutive Years*
> > >
> > > --

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Java and .jar files on OMVS

[Jack J. Woehr]

Kirk Wolf wrote:

In the wild, scp and sftp are binary protocols.  Most implementations don't
do any conversion for either.


sftp is modeled on ftp where there has always been the switch between text and 
image (binary).


IBM chose to make sftp binary (but there is a switch in the z/OS sftp
client to do conversion) and for scp (on both the z/OS client and server)
to always do conversion.


Perfectly technically feasible and perfectly tone deaf.  It should have been 
the other way around. In fact, it is.
OMVS sftp has the text/binary switch. On the other hand, scp, which possesses 
the -r (recursive directory/subdir copy)
is crippled on OMVS by being only text mode. How absurd and illogical and 
flying in the face of universal usage of scp
outside OMVS.

I would post a summary of our community conversation on this point over the 
past few days on the m...@openbsd.org
list for laughs but I don't want to expose IBM to their kidding :)

--
Jack J. Woehr # Science is more than a body of knowledge. It's a way of
www.well.com/~jax # thinking, a way of skeptically interrogating the universe
www.softwoehr.com # with a fine understanding of human fallibility. - Carl Sagan

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN