Problem configuring Control-T with ATL
Hi, We are having problems configuring Control-T to work with our new IBM TS7760. We've gone through the documented steps, but things are not working right. Our Configuration: The computer has 4 partitions. There is no sharing of DASD between the partitions. Control-T is installed on all partitions. Each Partition was assigned a different set of categories. This was verified with the DS QL,CATS command. All of the required step to configure the ATL to SMS were performed. The exits CBRUXCUA, CBRUXEJC, and CBRUXENT were compiled into a library which was added to the Linklist. The IBM versions of these exits were removed from sys1.linklib. The ATL is online to SMS OAM is up. Control-T is up in all partitions. The problem: When we add a Virtual Tape Volume in the ATL that is not defined in the MDB for a partition, we get these messages in OAM: CTTCBR13: VOLUME: T00103 NOT FOUND IN MDB. VOLUME IS IGNORED CBR3620I ENTRY OF VOLUME T00103 INTO LIBRARY MLVTL FAILED. CBR3621I ENTER REQUEST IGNORED BY THE CARTRIDGE ENTRY INSTALLATION EXIT (CBRUXENT). Message CTTCBR13 is not documented anywhere. In the partition where this volume is defined in the MDB, nothing happens. When I restart OAM in the partition, the volume is accepted, and defined in SMS. We see these messages in OAM: CBR3610I VOLUME ENTRY PROCESSING. 324 THE FOLLOWING VOLUMES WERE ENTERED INTO LIBRARY MLVTL. T00103 Why do I have to restart OAM for the Virtual volume to be added? Thanks Gadi ? ?? ? ?? ??? ??? ?? ? ??? ?? ??. ?? , ?? ??? ?, ??? ? ?? ??? ? ?? ?? ?. ? ? ?? ?? ?? ?? ?? ??? ??? ???, ?/?? ?, ? ?? ? ? ? ? ?? ?? ? ??? ?/?? ?? ?? ??. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Why are sophisticated system-level coding examples not available? [was: RE: Recommended method for accessing secondary access spaces]
I have copied the source code for Jol up to the www.Oscar-Jol.com website. IBM examined and approved the code many years ago. Jol effectively replaces the JCL interpretor and quite a lot of the initiator when using Dynamic Allocation instead of JCL. It is part compiler with PL/I style syntax, and ASM macro capabilities and part run time monitor. It is here: http://start.oscar-jol.com/download-store/Jol_Distribution_2011_Source.zip This is the Jol Source Code - IBM370 Mainframe Assembler version. A PLM is also available upon request. www.Oscar-Jol.com has full documentation and the executables. Jol is a major enhancement laguage for IBM Mainframes. It can greatly enhance all operations in a mainframe environment. Jol is an English like command language with Network and Scheduling capabilities, and a full scripting language for the mainframe. 3270 Panels are provided for many functions. Versions exist for Windows, Linux and other systems It has also been ported to C and PL/I. Clem Clarke -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: [EXTERNAL] Re: Co-posted: Rexx performance measures
Welcome to the new IBM. And they think they're going to woo cloud customers with this level of support... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Anyone decided to go to Share in Mar 2019 in PHOENIX AZ?
I'm officially going. Just saving up for all the expenses to get there from Australia. On Wed, Nov 7, 2018 at 12:55 PM Ed Jaffe wrote: > On 11/5/2018 11:34 AM, Lizette Koehler wrote: > > If so, Jerry Whitteridge and I might be wandering around since we live > in PHX > > > > Hope to see some of you there > > Assuming I don't get hit by a bus between now and then... > > -- > Phoenix Software International > Edward E. Jaffe > 831 Parkview Drive North > El Segundo, CA 90245 > https://www.phoenixsoftware.com/ > > > > > This e-mail message, including any attachments, appended messages and the > information contained therein, is for the sole use of the intended > recipient(s). If you are not an intended recipient or have otherwise > received this email message in error, any use, dissemination, distribution, > review, storage or copying of this e-mail message and the information > contained therein is strictly prohibited. If you are not an intended > recipient, please contact the sender by reply e-mail and destroy all copies > of this email message and do not otherwise utilize or retain this email > message or any or all of the information contained therein. Although this > email message and any attachments or appended messages are believed to be > free of any virus or other defect that might affect any computer system > into > which it is received and opened, it is the responsibility of the recipient > to ensure that it is virus free and no responsibility is accepted by the > sender for any loss or damage arising in any way from its opening or use. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- Wayne V. Bickerdike -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: automatic tape library - DR
Take a look at DFSMS Object Access Method Planning, Installation, and Storage Administration Guide for Tape Libraries, Chapter 4. Defining and monitoring your configuration, Disaster recovery site considerations. https://www-01.ibm.com/servers/resourcelink/svc00100.nsf/pages/zOSV2R3SC236867/$file/idao300_v2r3.pdf Regards, Kevin -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Nai, Dean Sent: Wednesday, November 14, 2018 12:08 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: automatic tape library - DR Hi, Did anyone ever run into this problem at a DR site? At our production site we have an automated tape library that looks like this: TAPELIB1 AL 3584-L22888 248 6 113 Y Y When we bring our LPAR up in DR we are getting an IGD330I Library Logical Type Not Defined. IGD306I Return code=12 Reason code=65 At the DR site we don't have a library, only stand alone tape drives. When I looked at the library in OAM the lib type was UNK. Any thoughts. Dean Nai > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM (Subject clip volume with JCL)
On Wed, 14 Nov 2018 19:53:55 +, Seymour J Metz wrote: >Some b0rken e-mail software makes proper quoting very difficult. Take m$ >lookout - please! > Yet some persist in using it. Worse, some employers requre it. > >From: Tony Harminc >Sent: Wednesday, November 14, 2018 2:49 PM > >On 14 November 2018 at 14:34, Paul Gilmartin wrote: > >> And, all, please trim the superfluous footers, disclaimers, etc. >> (It's the malign consequence of top-posting.) > >Better yet, don't top-post! Selectively quote, insert your comments >where they belong, and trim with care. > That's *so* 20th Century! Users nowadays expect each ply to be an entire archive of the thread. When extending a Cc: list, *selectively* quote from earlier plies to bring newcomers up to speed. Editing should be the responsibility of the originator, not of every recipient. -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ASMA034E
Thank You - those worked. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Cieri, Anthony Sent: Wednesday, November 14, 2018 4:34 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: ASMA034E There is a sample z/OS FTP client user exit in TCPIP.SEZAINST(EZAFCEXT). In this sample exit, there are two "in-stream" macros called ABCINIT and ABCTERM. The ABCINIT macro supports setting multiple base registers. Hth Tony -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Steely.Mark Sent: Wednesday, November 14, 2018 4:50 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: ASMA034E The assembler program I am working on is receiving several of these messages: ASMA034E Operand =X' beyond active USING range by 148 bytes I have tried all the examples to add a second register to the USING statement. When the program executes it gets a S0C1. Currently I have a macro call ENTER which sets up all the register and generates a USING statement with 1 register. Does anyone have a macro or a piece of code which will setup a USING statement with 2 registers. Thank You *** Disclaimer *** This communication (including all attachments) is solely for the use of the person to whom it is addressed and is a confidential AAA communication. If you are not the intended recipient, any use, distribution, printing, or copying is prohibited. If you received this email in error, please immediately delete it and notify the sender. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN *** Disclaimer *** This communication (including all attachments) is solely for the use of the person to whom it is addressed and is a confidential AAA communication. If you are not the intended recipient, any use, distribution, printing, or copying is prohibited. If you received this email in error, please immediately delete it and notify the sender. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ASMA034E
There is a sample z/OS FTP client user exit in TCPIP.SEZAINST(EZAFCEXT). In this sample exit, there are two "in-stream" macros called ABCINIT and ABCTERM. The ABCINIT macro supports setting multiple base registers. Hth Tony -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Steely.Mark Sent: Wednesday, November 14, 2018 4:50 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: ASMA034E The assembler program I am working on is receiving several of these messages: ASMA034E Operand =X' beyond active USING range by 148 bytes I have tried all the examples to add a second register to the USING statement. When the program executes it gets a S0C1. Currently I have a macro call ENTER which sets up all the register and generates a USING statement with 1 register. Does anyone have a macro or a piece of code which will setup a USING statement with 2 registers. Thank You *** Disclaimer *** This communication (including all attachments) is solely for the use of the person to whom it is addressed and is a confidential AAA communication. If you are not the intended recipient, any use, distribution, printing, or copying is prohibited. If you received this email in error, please immediately delete it and notify the sender. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ASMA034E
I believe it would be more educational for you to show what you tried. On Wed, 14 Nov 2018 21:50:16 + "Steely.Mark" wrote: :>The assembler program I am working on is receiving several of these messages: :> :>ASMA034E Operand =X' beyond active USING range by 148 bytes :> :> :>I have tried all the examples to add a second register to the USING statement. :>When the program executes it gets a S0C1. :> :>Currently I have a macro call ENTER which sets up all the register and generates a USING statement with 1 register. :> :>Does anyone have a macro or a piece of code which will setup a USING statement with 2 registers. -- Binyamin Dissen http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ASMA034E
In addition to adding a second register to the USING you also have to load the second register with (1st base register + 4096). Just specifying it on the USING is not enough. Your ENTER macro should support setting more than one base register for you (most of the ones I have seen will do so for you, at any rate). Check the parameters to that macro and whatever documentation on it you may have to see how to do that. HTH Peter -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Steely.Mark Sent: Wednesday, November 14, 2018 4:50 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: ASMA034E EXTERNAL EMAIL The assembler program I am working on is receiving several of these messages: ASMA034E Operand =X' beyond active USING range by 148 bytes I have tried all the examples to add a second register to the USING statement. When the program executes it gets a S0C1. Currently I have a macro call ENTER which sets up all the register and generates a USING statement with 1 register. Does anyone have a macro or a piece of code which will setup a USING statement with 2 registers. Thank You -- This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ASMA034E
The assembler program I am working on is receiving several of these messages: ASMA034E Operand =X' beyond active USING range by 148 bytes I have tried all the examples to add a second register to the USING statement. When the program executes it gets a S0C1. Currently I have a macro call ENTER which sets up all the register and generates a USING statement with 1 register. Does anyone have a macro or a piece of code which will setup a USING statement with 2 registers. Thank You *** Disclaimer *** This communication (including all attachments) is solely for the use of the person to whom it is addressed and is a confidential AAA communication. If you are not the intended recipient, any use, distribution, printing, or copying is prohibited. If you received this email in error, please immediately delete it and notify the sender. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM (Subject clip volume with JCL)
On Wed, 14 Nov 2018 14:49:42 -0500, Tony Harminc (t...@harminc.net) wrote about "Re: VM (Subject clip volume with JCL)" (in ): > On 14 November 2018 at 14:34, Paul Gilmartin > <000433f07816-dmarc-requ...@listserv.ua.edu> wrote: > >> And, all, please trim the superfluous footers, disclaimers, etc. >> (It's the malign consequence of top-posting.) > > Better yet, don't top-post! Selectively quote, insert your comments > where they belong, and trim with care. +1000 -- Regards, Dave [RLU #314465] *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* david.w.n...@googlemail.com (David W Noon) *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
automatic tape library - DR
Hi, Did anyone ever run into this problem at a DR site? At our production site we have an automated tape library that looks like this: TAPELIB1 AL 3584-L22888 248 6 113 Y Y When we bring our LPAR up in DR we are getting an IGD330I Library Logical Type Not Defined. IGD306I Return code=12 Reason code=65 At the DR site we don't have a library, only stand alone tape drives. When I looked at the library in OAM the lib type was UNK. Any thoughts. Dean Nai > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM (Subject clip volume with JCL)
Some b0rken e-mail software makes proper quoting very difficult. Take m$ lookout - please! -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List on behalf of Tony Harminc Sent: Wednesday, November 14, 2018 2:49 PM To: IBM-MAIN@listserv.ua.edu Subject: Re: VM (Subject clip volume with JCL) On 14 November 2018 at 14:34, Paul Gilmartin <000433f07816-dmarc-requ...@listserv.ua.edu> wrote: > And, all, please trim the superfluous footers, disclaimers, etc. > (It's the malign consequence of top-posting.) Better yet, don't top-post! Selectively quote, insert your comments where they belong, and trim with care. Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM (Subject clip volume with JCL)
On 14 November 2018 at 14:34, Paul Gilmartin <000433f07816-dmarc-requ...@listserv.ua.edu> wrote: > And, all, please trim the superfluous footers, disclaimers, etc. > (It's the malign consequence of top-posting.) Better yet, don't top-post! Selectively quote, insert your comments where they belong, and trim with care. Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM (Subject clip volume with JCL)
On 2018-11-14, at 10:14:07, Nai, Dean wrote: > You're welcome. But, please use a more informative Subject: in the future for the benefit of members searching the Archives. And, all, please trim the superfluous footers, disclaimers, etc. (It's the malign consequence of top-posting.) -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM
Thanks Tony and Dave. Dean Nai On 11/14/18, 12:03 PM, "IBM Mainframe Discussion List on behalf of David Spiegel" wrote: >Hi Dean, >I haven't done this in a while, but ... >The only ways to ICKDSF REFORMAT a "real" DASD Volume on a Guest VM, is >to either ATTACH the Device or DEDICATE it. >AFAIK, you cannot REFORMAT a Full-Volume MiniDisk. > >Regards, >David > >On 2018-11-14 11:48, Tony Thigpen wrote: >> It works on a VM volume or a VM mini-disk. >> >> Tony Thigpen >> >> Nai, Dean wrote on 11/14/18 11:44 AM: >>> Hi Tony, >>> >>> Not a VM person but working on a DR now. Does that work for a VM >>> volume? >>> >>> >>> Dean Nai >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> On 11/14/18, 11:07 AM, "IBM Mainframe Discussion List on behalf of >>> Tony Thigpen" >> t...@vse2pdf.com> wrote: >>> Use REFORMAT in ICKDSF. Tony Thigpen Nai, Dean wrote on 11/14/18 10:18 AM: > Anyone have any JCL to clip a VM volume from one name to another. > Thanks in advance. > > > Dean Nai > > > > > > > > > > > On 11/14/18, 8:49 AM, "IBM Mainframe Discussion List on behalf of > Joseph Reichman" reichman...@gmail.com> wrote: > >> Thanks >> >> >> >>> On Nov 14, 2018, at 8:41 AM, Rob Scott >>> wrote: >>> >>> You have at least 2 options : >>> >>> (1) Build a parameter control block for your SRB to accept via >>> IEAMSCHD PARM= keyword >>> Your SRB scheduler can then populate any relevant information >>> that the SRB needs to know >>> >>> (2) Locate your SRB scheduler via trusted control blocks - i.e >>> wherever the PC-owning server has "hung its hat" >>> >>> Rob Scott >>> Rocket Software >>> >>> >>> -Original Message- >>> From: IBM Mainframe Discussion List On >>> Behalf Of Joseph Reichman >>> Sent: Wednesday, November 14, 2018 1:32 PM >>> To: IBM-MAIN@LISTSERV.UA.EDU >>> Subject: Asid of Scheduler of a SRB >>> >>> I don’t think there is anyway to determine this since with >>> ENV=STOKEN PASN=SASN=HASN of the target address space correct ? >>> >>> -- >>> >>> For IBM-MAIN subscribe / signoff / archive access instructions, >>> send email to lists...@listserv.ua.edu with the message: INFO >>> IBM-MAIN >>> >>> Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, >>> Waltham MA 02451 ■ Main Office Toll Free Number: +1 855.577.4323 >>> Contact Customer Support: >>> https://urldefense.proofpoint.com/v2/url?u=https-3A__eur01.safelinks.protection.outlook.com_-3Furl-3Dhttps-253A-252F-252Furldefense.proofpoint.com-252Fv2-252Furl-253Fu-253Dhttps-2D3A-5F-5Fmy.rocketsoftware.com-5FRocketCommunity-5FRCEmailSupport-2526d-253DDwIFaQ-2526c-253DvYl7KJMDeuM7F-2DNqf-5FhfailBifPmyspo7hrJGlNN7nU-2526r-253DJrkg6Kqkg1RuQHbN9OpjcGoj051-5FPOke-5FQQnGwsdEE8-2526m-253DWLLzf-5FFzQpkhJg-2Dz2i-5Fkd9rOh8h2zxuyKLit4VVQoww-2526s-253DowTTbF2i9yUpqtCC0PcajqGZ99opWt1Fhe3hbe0VtnA-2526e-26amp-3Bdata-3D02-257C01-257C-257Cd8f86abe661f4e2bd54008d64a511aad-257C84df9e7fe9f640afb435-257C1-257C0-257C636778109556946012-26amp-3Bsdata-3DKjAVpvdwiqxuXpJsyhkO8zzO0U1hMaT-252B-252BGQL1T-252BnGgk-253D-26amp-3Breserved-3D0-3D=DwIGaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=hiOamDk0ki7lH1StxCbpe6fYYi7BUk37RwfLTYr6BBI=-Kk49XnFaDOmNCMmCUOAnV91f9qHeTbambOeuKrWV_U= >>> Unsubscribe from Marketing Messages/Manage Your Subscription >>> Preferences - >>> https://urldefense.proofpoint.com/v2/url?u=https-3A__eur01.safelinks.protection.outlook.com_-3Furl-3Dhttps-253A-252F-252Furldefense.proofpoint.com-252Fv2-252Furl-253Fu-253Dhttp-2D3A-5F-5Fwww.rocketsoftware.com-5Fmanage-2D2Dyour-2D2Demail-2D2Dpreferences-2526d-253DDwIFaQ-2526c-253DvYl7KJMDeuM7F-2DNqf-5FhfailBifPmyspo7hrJGlNN7nU-2526r-253DJrkg6Kqkg1RuQHbN9OpjcGoj051-5FPOke-5FQQnGwsdEE8-2526m-253DWLLzf-5FFzQpkhJg-2Dz2i-5Fkd9rOh8h2zxuyKLit4VVQoww-2526s-253D6Md7EhqWkL9IOEhI5nC06qXyBLkhLVg-5FknNNEZTVduk-2526e-26amp-3Bdata-3D02-257C01-257C-257Cd8f86abe661f4e2bd54008d64a511aad-257C84df9e7fe9f640afb435-257C1-257C0-257C636778109556946012-26amp-3Bsdata-3DFVSFDRFq0dvzXqR-252BvWrdDdlOgOrE5xJG3RnWb1s1Czk-253D-26amp-3Breserved-3D0-3D=DwIGaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=hiOamDk0ki7lH1StxCbpe6fYYi7BUk37RwfLTYr6BBI=qopWpYMAVSm15riIIw6VvXshr1SZ2PwW03yE1IpzDs4= >>> Privacy Policy - >>>
Re: VM
Hi Dean, I haven't done this in a while, but ... The only ways to ICKDSF REFORMAT a "real" DASD Volume on a Guest VM, is to either ATTACH the Device or DEDICATE it. AFAIK, you cannot REFORMAT a Full-Volume MiniDisk. Regards, David On 2018-11-14 11:48, Tony Thigpen wrote: > It works on a VM volume or a VM mini-disk. > > Tony Thigpen > > Nai, Dean wrote on 11/14/18 11:44 AM: >> Hi Tony, >> >> Not a VM person but working on a DR now. Does that work for a VM >> volume? >> >> >> Dean Nai >> >> >> >> >> >> >> >> >> >> On 11/14/18, 11:07 AM, "IBM Mainframe Discussion List on behalf of >> Tony Thigpen" > t...@vse2pdf.com> wrote: >> >>> Use REFORMAT in ICKDSF. >>> >>> Tony Thigpen >>> >>> Nai, Dean wrote on 11/14/18 10:18 AM: Anyone have any JCL to clip a VM volume from one name to another. Thanks in advance. Dean Nai On 11/14/18, 8:49 AM, "IBM Mainframe Discussion List on behalf of Joseph Reichman" >>> reichman...@gmail.com> wrote: > Thanks > > > >> On Nov 14, 2018, at 8:41 AM, Rob Scott >> wrote: >> >> You have at least 2 options : >> >> (1) Build a parameter control block for your SRB to accept via >> IEAMSCHD PARM= keyword >> Your SRB scheduler can then populate any relevant information >> that the SRB needs to know >> >> (2) Locate your SRB scheduler via trusted control blocks - i.e >> wherever the PC-owning server has "hung its hat" >> >> Rob Scott >> Rocket Software >> >> >> -Original Message- >> From: IBM Mainframe Discussion List On >> Behalf Of Joseph Reichman >> Sent: Wednesday, November 14, 2018 1:32 PM >> To: IBM-MAIN@LISTSERV.UA.EDU >> Subject: Asid of Scheduler of a SRB >> >> I don’t think there is anyway to determine this since with >> ENV=STOKEN PASN=SASN=HASN of the target address space correct ? >> >> -- >> >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO >> IBM-MAIN >> >> Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, >> Waltham MA 02451 ■ Main Office Toll Free Number: +1 855.577.4323 >> Contact Customer Support: >> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefense.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__my.rocketsoftware.com_RocketCommunity_RCEmailSupport%26d%3DDwIFaQ%26c%3DvYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU%26r%3DJrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8%26m%3DWLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww%26s%3DowTTbF2i9yUpqtCC0PcajqGZ99opWt1Fhe3hbe0VtnA%26edata=02%7C01%7C%7Cd8f86abe661f4e2bd54008d64a511aad%7C84df9e7fe9f640afb435%7C1%7C0%7C636778109556946012sdata=KjAVpvdwiqxuXpJsyhkO8zzO0U1hMaT%2B%2BGQL1T%2BnGgk%3Dreserved=0= >> Unsubscribe from Marketing Messages/Manage Your Subscription >> Preferences - >> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefense.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttp-3A__www.rocketsoftware.com_manage-2Dyour-2Demail-2Dpreferences%26d%3DDwIFaQ%26c%3DvYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU%26r%3DJrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8%26m%3DWLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww%26s%3D6Md7EhqWkL9IOEhI5nC06qXyBLkhLVg_knNNEZTVduk%26edata=02%7C01%7C%7Cd8f86abe661f4e2bd54008d64a511aad%7C84df9e7fe9f640afb435%7C1%7C0%7C636778109556946012sdata=FVSFDRFq0dvzXqR%2BvWrdDdlOgOrE5xJG3RnWb1s1Czk%3Dreserved=0= >> Privacy Policy - >> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefense.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttp-3A__www.rocketsoftware.com_company_legal_privacy-2Dpolicy%26d%3DDwIFaQ%26c%3DvYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU%26r%3DJrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8%26m%3DWLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww%26s%3D41ahy4u9mZdbfKeu0jau_AksK_wP45TKyOLZ4m6nZ_8%26edata=02%7C01%7C%7Cd8f86abe661f4e2bd54008d64a511aad%7C84df9e7fe9f640afb435%7C1%7C0%7C636778109556946012sdata=%2FMkxRlrvxWH%2FRuyakMlBXM8ZpBuJO5L9UnQ6WFuvcTs%3Dreserved=0= >> >> >> This communication and any attachments may contain confidential >> information of Rocket Software, Inc. All unauthorized use, >> disclosure or distribution is prohibited. If you are not the >> intended recipient, please notify Rocket Software immediately and >> destroy all copies of this communication. Thank you. >> >> -- >> >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO >> IBM-MAIN > >
Re: VM
It works on a VM volume or a VM mini-disk. Tony Thigpen Nai, Dean wrote on 11/14/18 11:44 AM: Hi Tony, Not a VM person but working on a DR now. Does that work for a VM volume? Dean Nai On 11/14/18, 11:07 AM, "IBM Mainframe Discussion List on behalf of Tony Thigpen" wrote: Use REFORMAT in ICKDSF. Tony Thigpen Nai, Dean wrote on 11/14/18 10:18 AM: Anyone have any JCL to clip a VM volume from one name to another. Thanks in advance. Dean Nai On 11/14/18, 8:49 AM, "IBM Mainframe Discussion List on behalf of Joseph Reichman" wrote: Thanks On Nov 14, 2018, at 8:41 AM, Rob Scott wrote: You have at least 2 options : (1) Build a parameter control block for your SRB to accept via IEAMSCHD PARM= keyword Your SRB scheduler can then populate any relevant information that the SRB needs to know (2) Locate your SRB scheduler via trusted control blocks - i.e wherever the PC-owning server has "hung its hat" Rob Scott Rocket Software -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joseph Reichman Sent: Wednesday, November 14, 2018 1:32 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Asid of Scheduler of a SRB I don’t think there is anyway to determine this since with ENV=STOKEN PASN=SASN=HASN of the target address space correct ? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 855.577.4323 Contact Customer Support: https://urldefense.proofpoint.com/v2/url?u=https-3A__my.rocketsoftware.com_RocketCommunity_RCEmailSupport=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=owTTbF2i9yUpqtCC0PcajqGZ99opWt1Fhe3hbe0VtnA= Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_manage-2Dyour-2Demail-2Dpreferences=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=6Md7EhqWkL9IOEhI5nC06qXyBLkhLVg_knNNEZTVduk= Privacy Policy - https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_company_legal_privacy-2Dpolicy=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=41ahy4u9mZdbfKeu0jau_AksK_wP45TKyOLZ4m6nZ_8= This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM
Hi Tony, Not a VM person but working on a DR now. Does that work for a VM volume? Dean Nai On 11/14/18, 11:07 AM, "IBM Mainframe Discussion List on behalf of Tony Thigpen" wrote: >Use REFORMAT in ICKDSF. > >Tony Thigpen > >Nai, Dean wrote on 11/14/18 10:18 AM: >> Anyone have any JCL to clip a VM volume from one name to another. Thanks in >> advance. >> >> >> Dean Nai >> >> >> >> >> >> >> >> >> >> >> On 11/14/18, 8:49 AM, "IBM Mainframe Discussion List on behalf of Joseph >> Reichman" >> wrote: >> >>> Thanks >>> >>> >>> On Nov 14, 2018, at 8:41 AM, Rob Scott wrote: You have at least 2 options : (1) Build a parameter control block for your SRB to accept via IEAMSCHD PARM= keyword Your SRB scheduler can then populate any relevant information that the SRB needs to know (2) Locate your SRB scheduler via trusted control blocks - i.e wherever the PC-owning server has "hung its hat" Rob Scott Rocket Software -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joseph Reichman Sent: Wednesday, November 14, 2018 1:32 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Asid of Scheduler of a SRB I don’t think there is anyway to determine this since with ENV=STOKEN PASN=SASN=HASN of the target address space correct ? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 855.577.4323 Contact Customer Support: https://urldefense.proofpoint.com/v2/url?u=https-3A__my.rocketsoftware.com_RocketCommunity_RCEmailSupport=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=owTTbF2i9yUpqtCC0PcajqGZ99opWt1Fhe3hbe0VtnA= Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_manage-2Dyour-2Demail-2Dpreferences=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=6Md7EhqWkL9IOEhI5nC06qXyBLkhLVg_knNNEZTVduk= Privacy Policy - https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_company_legal_privacy-2Dpolicy=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=41ahy4u9mZdbfKeu0jau_AksK_wP45TKyOLZ4m6nZ_8= This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >>> >>> -- >>> For IBM-MAIN subscribe / signoff / archive access instructions, >>> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> >> -- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> >> > >-- >For IBM-MAIN subscribe / signoff / archive access instructions, >send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: VM
Use REFORMAT in ICKDSF. Tony Thigpen Nai, Dean wrote on 11/14/18 10:18 AM: Anyone have any JCL to clip a VM volume from one name to another. Thanks in advance. Dean Nai Senior z/OS Systems Programmer Technical Services Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 work: 603-271-1529 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. On 11/14/18, 8:49 AM, "IBM Mainframe Discussion List on behalf of Joseph Reichman" wrote: Thanks On Nov 14, 2018, at 8:41 AM, Rob Scott wrote: You have at least 2 options : (1) Build a parameter control block for your SRB to accept via IEAMSCHD PARM= keyword Your SRB scheduler can then populate any relevant information that the SRB needs to know (2) Locate your SRB scheduler via trusted control blocks - i.e wherever the PC-owning server has "hung its hat" Rob Scott Rocket Software -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joseph Reichman Sent: Wednesday, November 14, 2018 1:32 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Asid of Scheduler of a SRB I don’t think there is anyway to determine this since with ENV=STOKEN PASN=SASN=HASN of the target address space correct ? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 855.577.4323 Contact Customer Support: https://urldefense.proofpoint.com/v2/url?u=https-3A__my.rocketsoftware.com_RocketCommunity_RCEmailSupport=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=owTTbF2i9yUpqtCC0PcajqGZ99opWt1Fhe3hbe0VtnA= Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_manage-2Dyour-2Demail-2Dpreferences=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=6Md7EhqWkL9IOEhI5nC06qXyBLkhLVg_knNNEZTVduk= Privacy Policy - https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_company_legal_privacy-2Dpolicy=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=41ahy4u9mZdbfKeu0jau_AksK_wP45TKyOLZ4m6nZ_8= This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
VM
Anyone have any JCL to clip a VM volume from one name to another. Thanks in advance. Dean Nai Senior z/OS Systems Programmer Technical Services Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 work: 603-271-1529 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. On 11/14/18, 8:49 AM, "IBM Mainframe Discussion List on behalf of Joseph Reichman" wrote: >Thanks > > > >> On Nov 14, 2018, at 8:41 AM, Rob Scott wrote: >> >> You have at least 2 options : >> >> (1) Build a parameter control block for your SRB to accept via IEAMSCHD >> PARM= keyword >> Your SRB scheduler can then populate any relevant information that the SRB >> needs to know >> >> (2) Locate your SRB scheduler via trusted control blocks - i.e wherever the >> PC-owning server has "hung its hat" >> >> Rob Scott >> Rocket Software >> >> >> -Original Message- >> From: IBM Mainframe Discussion List On Behalf Of >> Joseph Reichman >> Sent: Wednesday, November 14, 2018 1:32 PM >> To: IBM-MAIN@LISTSERV.UA.EDU >> Subject: Asid of Scheduler of a SRB >> >> I don’t think there is anyway to determine this since with ENV=STOKEN >> PASN=SASN=HASN of the target address space correct ? >> >> -- >> For IBM-MAIN subscribe / signoff / archive access instructions, send email >> to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> >> Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 >> ■ Main Office Toll Free Number: +1 855.577.4323 >> Contact Customer Support: >> https://urldefense.proofpoint.com/v2/url?u=https-3A__my.rocketsoftware.com_RocketCommunity_RCEmailSupport=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=owTTbF2i9yUpqtCC0PcajqGZ99opWt1Fhe3hbe0VtnA= >> Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - >> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_manage-2Dyour-2Demail-2Dpreferences=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=6Md7EhqWkL9IOEhI5nC06qXyBLkhLVg_knNNEZTVduk= >> Privacy Policy - >> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.rocketsoftware.com_company_legal_privacy-2Dpolicy=DwIFaQ=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=WLLzf_FzQpkhJg-z2i_kd9rOh8h2zxuyKLit4VVQoww=41ahy4u9mZdbfKeu0jau_AksK_wP45TKyOLZ4m6nZ_8= >> >> >> This communication and any attachments may contain confidential information >> of Rocket Software, Inc. All unauthorized use, disclosure or distribution is >> prohibited. If you are not the intended recipient, please notify Rocket >> Software immediately and destroy all copies of this communication. Thank you. >> >> -- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >-- >For IBM-MAIN subscribe / signoff / archive access instructions, >send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Asid of Scheduler of a SRB
Thanks > On Nov 14, 2018, at 8:41 AM, Rob Scott wrote: > > You have at least 2 options : > > (1) Build a parameter control block for your SRB to accept via IEAMSCHD PARM= > keyword > Your SRB scheduler can then populate any relevant information that the SRB > needs to know > > (2) Locate your SRB scheduler via trusted control blocks - i.e wherever the > PC-owning server has "hung its hat" > > Rob Scott > Rocket Software > > > -Original Message- > From: IBM Mainframe Discussion List On Behalf Of > Joseph Reichman > Sent: Wednesday, November 14, 2018 1:32 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Asid of Scheduler of a SRB > > I don’t think there is anyway to determine this since with ENV=STOKEN > PASN=SASN=HASN of the target address space correct ? > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ > Main Office Toll Free Number: +1 855.577.4323 > Contact Customer Support: > https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport > Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - > http://www.rocketsoftware.com/manage-your-email-preferences > Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy > > > This communication and any attachments may contain confidential information > of Rocket Software, Inc. All unauthorized use, disclosure or distribution is > prohibited. If you are not the intended recipient, please notify Rocket > Software immediately and destroy all copies of this communication. Thank you. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Asid of Scheduler of a SRB
You have at least 2 options : (1) Build a parameter control block for your SRB to accept via IEAMSCHD PARM= keyword Your SRB scheduler can then populate any relevant information that the SRB needs to know (2) Locate your SRB scheduler via trusted control blocks - i.e wherever the PC-owning server has "hung its hat" Rob Scott Rocket Software -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joseph Reichman Sent: Wednesday, November 14, 2018 1:32 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Asid of Scheduler of a SRB I don’t think there is anyway to determine this since with ENV=STOKEN PASN=SASN=HASN of the target address space correct ? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 855.577.4323 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Asid of Scheduler of a SRB
I don’t think there is anyway to determine this since with ENV=STOKEN PASN=SASN=HASN of the target address space correct ? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Why are sophisticated system-level coding examples not available? [was: RE: Recommended method for accessing secondary access spaces]
I was thinking about my last post First off let me say a little bit about background I have had some experience with vendors but it’s very light Doing this type of programming was my passions unfortunately for me I got into it after 2000 when IT destabilized I am fortunate to have a landed a more stable government job But I still enjoy this kind of programming So I am grateful for Peter Relson, Rob Scott Ed Jaffe and Binyamin Dessin help But as an example one of the last things Ed suggested to me was in the SRB I PC-ss back to the caller maybe I should have known this off the top of my head But it took me a while to figure out the the Space Switching PC routine with SASN=OLD The caller is the SASN Address space Thanks > On Nov 12, 2018, at 3:33 PM, Edward Finnell > <000248cce9f3-dmarc-requ...@listserv.ua.edu> wrote: > > I was in several of the OCO sessions at SHARE. They were heated but in > summary there were two major points. Intellectual property(the clones were > trying to reverse engineer MVS), change control-Hursley was saying the large > majority of their problems were coming from modified IBM code. Our post SHARE > review we recommended to buy the source and hold on as better documentation > for the Interfaces was sure to follow. It never did... > > In a message dated 11/12/2018 2:22:13 PM Central Standard Time, > edja...@phoenixsoftware.com writes: > They WERE published many years ago and then OCO came along and took > those great examples away. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: [EXTERNAL] Re: Co-posted: Rexx performance measures
So it's working (aka broken) as coded and the only way to get it fixed is to open an RFE, take 2 aspirins, and then take a bottle of sleeping pills - then by the time you wake up you'll have completely forgotten about the issue and moved on and IBM still won't have fixed it. If they agree it's broken then they should take an APAR at the very least. What is wrong with this picture ☹ -- Lionel B. Dyck (Contractor) < Mainframe Systems Programmer – RavenTek Solution Partners -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ITschak Mugzach Sent: Monday, November 12, 2018 2:37 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: [EXTERNAL] Re: Co-posted: Rexx performance measures an update about syssrc & syscpu under systemrexx: I opened a PMR. IBM agrees it does not work. However, they supplied a long explanation how it works under TSO/E, why it doesn't work under SystemRexx, and a workaround based on Rexx STORAGE function. If I want the issue to be fixed, I need to open a requirement for this. ITschak On Mon, Sep 17, 2018 at 3:54 PM Tom Marchant < 000a2a8c2020-dmarc-requ...@listserv.ua.edu> wrote: > On Sat, 15 Sep 2018 15:29:48 +0800, David Crayford wrote: > > >On 14/09/2018 9:21 PM, Tom Marchant wrote: > >> > >> What model is that? How severely is it kneecapped? > >> > > > >We're pretty heavily kneecapped but I would still expect better > >performance than a emulated machine > > > >Processor Information from MXI. We run 3 LPARs > > > >CPU Model2965 CPU Type Code00 > >Physical CPUs4 Processor Name Z10#T03 > >Total MIPS 375.52 SU/Second4553.21 > >MIPS/CPU 93.88 CPU Adjustment 3514 > >MSU 66 > > This doesn't tell what model it is. What does D M=CPU show? > > 4 CPUs and 66 MSU for a z13s suggests that it is a 2965-F04. > If you look at the LSPR data at > > https://www-01.ibm.com/servers/resourcelink/lib03060.nsf/pages/lsprITR > zOSv2r2?OpenDocument#z13s you can see that a full speed z13s > (2965-Z04) is 622 MSU, not quite 10 times as fast as an F04. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- ITschak Mugzach *|** IronSphere Platform* *|* *Information Security Contiguous Monitoring for Legacy **| * -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: (fwd) How to use gskssl in CICS Environment ?
In article <5713005125545930.wa.extern.sven.siebertvolkswagen...@listserv.ua.edu> you wrote: > this issue could be fixed: > SYS1.SIELANKE has been added to DFHRPL concatenation, and now it works. Great! That makes sense. It's been so long since I've done any CICS, I had forgotten about that DD. Now if I could just forget CEDA, CEDF, CEMT, CSSF, CSSL etc. :) -- Don Poitras - SAS Development - SAS Institute Inc. - SAS Campus Drive sas...@sas.com (919) 531-5637Cary, NC 27513 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: (fwd) How to use gskssl in CICS Environment ?
this issue could be fixed: SYS1.SIELANKE has been added to DFHRPL concatenation, and now it works. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IGW01203E MEMBER xxxxxxxx EXCEEDS LIMITATIONS FOR PDS LOAD MODULES.
W dniu 2018-11-12 o 17:50, Paul Gilmartin pisze: [...] Others: o At times I've needed to resort to PDS rather than PDSE because of cross-plex sharing constraints on PDSE. o Does PDSE impose a stricter constraint on number of records in a single member than PDS? Perhaps 16Mi? Yes. PDSE V1 had a limit on 15 728 639 records per member, which yields approx 1,2 GB for RECFM=80. For PDSE V2 the limit was increased to 2 146 435 071 records, approx. 171 GB. PDS has no limitation for member size, but it is limited to 64k tracks, so the biggest member could be ~3,8 GB - more than PDSE V1, much less than PDSE V2. BTW: there is poorly documented limit for PDSE size 16 TB or 178 956 970 tracks (~10,1 TB). Both are theoretical nowadays, because the largest volume is 1 TB. o Could an installation convert *all* its PDS to PDSE and never deal with PDS again? Is this precluded only by the scatter-load limitation? What abour PARMLIB-type data sets? ServerPac Installation Dialog can tell you which libraries cannot be converted form PDS to PDSE. There really few of them, vast majority can be converted, more and more must be PDSE. According to Dialog PARMLIB has to be PDS. -- Radoslaw Skorupka Lodz, Poland == Jeśli nie jesteś adresatem tej wiadomości: - powiadom nas o tym w mailu zwrotnym (dziękujemy!), - usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś na dysku). Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać karze. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. Sąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 025237, NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 01.01.2018 r. wynosi 169.248.488 złotych. If you are not the addressee of this message: - let us know by replying to this e-mail (thank you!), - delete this message permanently (including all the copies which you have printed out or saved). This message may contain legally protected information, which may be used exclusively by the addressee.Please be reminded that anyone who disseminates (copies, distributes) this message or takes any similar action, violates the law and may be penalised. mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. District Court for the Capital City of Warsaw, 12th Commercial Division of the National Court Register, KRS 025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 169,248,488 as at 1 January 2018. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Compiled XMITIP
Hello Listers! Does anyone have any experience with compiled REXX, in general... is it worth it? Any thoughts on compiled XMITIP.. As always, thanks for all your feedback. - Vignesh Mainframe Infrastructure MARKSANDSPENCER.COM Unless otherwise stated above: Marks and Spencer plc Registered Office: Waterside House 35 North Wharf Road London W2 1NW Registered No. 214436 in England and Wales. Telephone (020) 7935 4422 Facsimile (020) 7487 2670 www.marksandspencer.com Please note that electronic mail may be monitored. This e-mail is confidential. If you received it by mistake, please let us know and then delete it from your system; you should not copy, disclose, or distribute its contents to anyone nor act in reliance on this e-mail, as this is prohibited and may be unlawful. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN