Re: BPXPRM00 parmlib
Thank you that worked. Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw -Original Message- From: IBM Mainframe Discussion List On Behalf Of Cieri, Anthony Sent: Thursday, January 31, 2019 2:08 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: BPXPRM00 parmlib SETOMVS MAXUIDS=2000 No comma after SETOMVS!!! -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of McCabe, Ron Sent: Thursday, January 31, 2019 5:03 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: BPXPRM00 parmlib [[ SEI WARNING *** This email was sent from an external source. Do not open attachments or click on links from unknown or suspicious senders. *** ]] David, I do have my mount statements split out from other statements. I must be doing something wrong because when I enter "SETOMVS,MAXUIDS=2000" as a command from the z/OS console I get an error that the command is invalid. I tried to issue from within OMVS and I also get an error "FSUM7351 not found". Am I entering the command from the wrong place? -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jousma, David Sent: Thursday, January 31, 2019 11:13 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: BPXPRM00 parmlib Ron, Many individual parms can be set via the SETOMVS console command, and may be more along the lines of what you want. Depending on if you have your MOUNT statements split out from other statements (BPXPRMFS vs BPXPRM00), doing a SET OMVS=xx might do more than you anticipate or want. It would be my recommendation to use SETOMVS. _ Dave Jousma Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of McCabe, Ron Sent: Thursday, January 31, 2019 1:43 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: BPXPRM00 parmlib **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Hello, If I need to make a change to my BPXPRM00 parmlib member can I get the change in while everything is running or does it have to done via an IPL? Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribut
Re: BPXPRM00 parmlib
SETOMVS MAXUIDS=2000 No comma after SETOMVS!!! -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of McCabe, Ron Sent: Thursday, January 31, 2019 5:03 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: BPXPRM00 parmlib [[ SEI WARNING *** This email was sent from an external source. Do not open attachments or click on links from unknown or suspicious senders. *** ]] David, I do have my mount statements split out from other statements. I must be doing something wrong because when I enter "SETOMVS,MAXUIDS=2000" as a command from the z/OS console I get an error that the command is invalid. I tried to issue from within OMVS and I also get an error "FSUM7351 not found". Am I entering the command from the wrong place? -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jousma, David Sent: Thursday, January 31, 2019 11:13 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: BPXPRM00 parmlib Ron, Many individual parms can be set via the SETOMVS console command, and may be more along the lines of what you want. Depending on if you have your MOUNT statements split out from other statements (BPXPRMFS vs BPXPRM00), doing a SET OMVS=xx might do more than you anticipate or want. It would be my recommendation to use SETOMVS. _ Dave Jousma Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of McCabe, Ron Sent: Thursday, January 31, 2019 1:43 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: BPXPRM00 parmlib **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Hello, If I need to make a change to my BPXPRM00 parmlib member can I get the change in while everything is running or does it have to done via an IPL? Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electro
Re: BPXPRM00 parmlib
David, I do have my mount statements split out from other statements. I must be doing something wrong because when I enter "SETOMVS,MAXUIDS=2000" as a command from the z/OS console I get an error that the command is invalid. I tried to issue from within OMVS and I also get an error "FSUM7351 not found". Am I entering the command from the wrong place? -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jousma, David Sent: Thursday, January 31, 2019 11:13 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: BPXPRM00 parmlib Ron, Many individual parms can be set via the SETOMVS console command, and may be more along the lines of what you want. Depending on if you have your MOUNT statements split out from other statements (BPXPRMFS vs BPXPRM00), doing a SET OMVS=xx might do more than you anticipate or want. It would be my recommendation to use SETOMVS. _ Dave Jousma Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of McCabe, Ron Sent: Thursday, January 31, 2019 1:43 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: BPXPRM00 parmlib **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Hello, If I need to make a change to my BPXPRM00 parmlib member can I get the change in while everything is running or does it have to done via an IPL? Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions,
Re: BPXPRM00 parmlib
Sorry about the delayed response but I was out for a very important appointment. Anyway this is the first couple of lines from the D OMVS,O command and based on what I am seeing I must be using 00, CI, and FS. I'm going to do a test in my RESCUE system to see what it does. D OMVS,O BPXO043I 13.19.30 DISPLAY OMVS 539 OMVS 000F ACTIVE OMVS=(00,CI,FS) Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw -Original Message- From: IBM Mainframe Discussion List On Behalf Of Lizette Koehler Sent: Thursday, January 31, 2019 11:08 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: BPXPRM00 parmlib I would do a D OMVS and see if 00 is the only thing used. Some shops have multiple BPXPRM members and concatenate them together. Lizette > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Burrell, Todd > Sent: Thursday, January 31, 2019 11:46 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: BPXPRM00 parmlib > > For most everything you should be able to update it and then do T OMVS=00. > I believe there are a couple of limitations. > > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of McCabe, Ron > Sent: Thursday, January 31, 2019 1:43 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: BPXPRM00 parmlib > > Hello, > > If I need to make a change to my BPXPRM00 parmlib member can I get the > change in while everything is running or does it have to done via an IPL? > > Thanks, > Ron McCabe > Manager of Mainframe/Midrange Systems > Mutual of Enumclaw > > > Confidentiality Notice: This e- mail and all attachments may contain > CONFIDENTIAL information and are meant solely for the intended > recipient. It may contain controlled, privileged, or proprietary > information that is protected under applicable law and shall not be > disclosed to any unauthorized third party. If you are not the intended > recipient, you are hereby notified that any unauthorized review, > action, disclosure, distribution, or reproduction of any information > contained in this e- mail and any attachments is strictly PROHIBITED. > If you received this e- mail in error, please reply to the sender > immediately stating that this transmission was misdirected, and delete > or destroy all electronic and paper copies of this e-mail and > attachments without disclosing the contents. This e- mail does not > grant or assign rights of ownership in the proprietary subject matter > herein, nor shall it be construed as a joint venture, partnership, teaming > agreement, or any other formal business relationship. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: BPXPRM00 parmlib
Ron, Many individual parms can be set via the SETOMVS console command, and may be more along the lines of what you want. Depending on if you have your MOUNT statements split out from other statements (BPXPRMFS vs BPXPRM00), doing a SET OMVS=xx might do more than you anticipate or want. It would be my recommendation to use SETOMVS. _ Dave Jousma Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MIĀ 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of McCabe, Ron Sent: Thursday, January 31, 2019 1:43 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: BPXPRM00 parmlib **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Hello, If I need to make a change to my BPXPRM00 parmlib member can I get the change in while everything is running or does it have to done via an IPL? Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: BPXPRM00 parmlib
I would do a D OMVS and see if 00 is the only thing used. Some shops have multiple BPXPRM members and concatenate them together. Lizette > -Original Message- > From: IBM Mainframe Discussion List On Behalf Of > Burrell, Todd > Sent: Thursday, January 31, 2019 11:46 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: BPXPRM00 parmlib > > For most everything you should be able to update it and then do T OMVS=00. > I believe there are a couple of limitations. > > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of McCabe, Ron > Sent: Thursday, January 31, 2019 1:43 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: BPXPRM00 parmlib > > Hello, > > If I need to make a change to my BPXPRM00 parmlib member can I get the change > in while everything is running or does it have to done via an IPL? > > Thanks, > Ron McCabe > Manager of Mainframe/Midrange Systems > Mutual of Enumclaw > > > Confidentiality Notice: This e- mail and all attachments may contain > CONFIDENTIAL information and are meant solely for the intended recipient. It > may contain controlled, privileged, or proprietary information that is > protected under applicable law and shall not be disclosed to any unauthorized > third party. If you are not the intended recipient, you are hereby notified > that any unauthorized review, action, disclosure, distribution, or > reproduction of any information contained in this e- mail and any attachments > is strictly PROHIBITED. If you received this e- mail in error, please reply > to the sender immediately stating that this transmission was misdirected, and > delete or destroy all electronic and paper copies of this e-mail and > attachments without disclosing the contents. This e- mail does not grant or > assign rights of ownership in the proprietary subject matter herein, nor > shall it be construed as a joint venture, partnership, teaming agreement, or > any other formal business relationship. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: BPXPRM00 parmlib
For most everything you should be able to update it and then do T OMVS=00. I believe there are a couple of limitations. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of McCabe, Ron Sent: Thursday, January 31, 2019 1:43 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: BPXPRM00 parmlib Hello, If I need to make a change to my BPXPRM00 parmlib member can I get the change in while everything is running or does it have to done via an IPL? Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
BPXPRM00 parmlib
Hello, If I need to make a change to my BPXPRM00 parmlib member can I get the change in while everything is running or does it have to done via an IPL? Thanks, Ron McCabe Manager of Mainframe/Midrange Systems Mutual of Enumclaw Confidentiality Notice: This e- mail and all attachments may contain CONFIDENTIAL information and are meant solely for the intended recipient. It may contain controlled, privileged, or proprietary information that is protected under applicable law and shall not be disclosed to any unauthorized third party. If you are not the intended recipient, you are hereby notified that any unauthorized review, action, disclosure, distribution, or reproduction of any information contained in this e- mail and any attachments is strictly PROHIBITED. If you received this e- mail in error, please reply to the sender immediately stating that this transmission was misdirected, and delete or destroy all electronic and paper copies of this e-mail and attachments without disclosing the contents. This e- mail does not grant or assign rights of ownership in the proprietary subject matter herein, nor shall it be construed as a joint venture, partnership, teaming agreement, or any other formal business relationship. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN