Re: IPL Shutdown Problem

2015-09-17 Thread Meenakshi, Vinoth - CW 
Yes Ant. We did the IPL and the system is up and running.

Thanks for your assistance.

Regards,
Vinoth M


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 10:58 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Most typically, that wait state is entered when the system has been 
deliberately shut down by operators.

Re-IPL.

Ant.

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Meenakshi, Vinoth - CW
Sent: Thursday, 17 September 2015 2:40 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Hi Ant,

We couldn't able to access commands from master console or HMC, since the 
system went onto wait-state.

Central processor (CP) 0 is in a nonrestartable stopped state due to a System 
Control Program (SCP) initiated reset of the I/O interface for partition LPAR4. 
The disabled wait program status word (PSW) is 0002800040a2.

Could you assist how we move forward from here. Thanks

Regards,
Vinoth M

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 9:48 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

ROUTE command not working is a completely separate issue. It won't happen if 
that LPAR is outside of the sysplex. You'll need a console on that system. Use 
the HMC if you need to, assuming you have one. 

Try the F OMVS, STOPPFS=FZS command on a SYS9 console. F 
BPXOINIT,SHUTDOWN=FORKINIT should bring down both ZFS and OMVS.

$PJES2,ABEND if you absolutely have to.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Meenakshi, Vinoth - CW
Sent: Thursday, 17 September 2015 1:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Thanks Ant & Lizette.

F OMVS,STOPPFS=ZFS command worked and we were able to bring down ZFS for one 
systemSYS3 and for other system SYS9 we are facing an issue.

OMVS is down and we tried to issue STOPPFS=ZFS command and it's not allowing.

RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9

I think the system is out of sysplex now and still the below STC are running in 
SYS9.

  ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
  SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9

Regards,
Vinoth M


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 8:59 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
but that's probably post-JES2 completion at your site. Issue command F 
OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under 
z/OS 2.2, it is not recommended to run ZFS processing in its own address space.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, 17 September 2015 12:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are 
> running and it's not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions

Re: IPL Shutdown Problem

2015-09-17 Thread John McKown 
On Thu, Sep 17, 2015 at 12:10 AM, Meenakshi, Vinoth - CW <
vinoth.meenak...@bestbuy.com> wrote:

> Hi Ant,
>
> We couldn't able to access commands from master console or HMC, since the
> system went onto wait-state.
>
> Central processor (CP) 0 is in a nonrestartable stopped state due to a
> System Control Program (SCP) initiated reset of the I/O interface for
> partition LPAR4.
> The disabled wait program status word (PSW) is
> 0002800040a2.
>
> Could you assist how we move forward from here. Thanks
>

​Glad you have had your problem resolve (from later message in this thread).
Hard Wait codes are in the "MVS System Codes" manual. The good information
is the last 3 hex digits: 0A2
>From z/OS 1.12 (what we are running here):
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/IEA2H7B0/3.90

*Explanation:* Cross-system coupling facility (XCF) or cross-system
extended services encountered a non-recoverable error and stopped the
system. The system also issues this wait state in response to an operator
request to stop the system. See z/OS MVS Diagnosis: Reference
<http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/DOCNUM/GA22-7588/CCONTENTS?>
for
information on diagnosing sysplex problems.


At my shop, I do the shutdowns and IPLs. I get the above every time after I
do the z/OS operator command: V XCF,lpar,OFFLINE
​



>
> Regards,
> Vinoth M
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Anthony Thompson
> Sent: Thursday, September 17, 2015 9:48 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: IPL Shutdown Problem
>
> ROUTE command not working is a completely separate issue. It won't happen
> if that LPAR is outside of the sysplex. You'll need a console on that
> system. Use the HMC if you need to, assuming you have one.
>
> Try the F OMVS, STOPPFS=FZS command on a SYS9 console. F
> BPXOINIT,SHUTDOWN=FORKINIT should bring down both ZFS and OMVS.
>
> $PJES2,ABEND if you absolutely have to.
>
> Ant.
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Meenakshi, Vinoth - CW
> Sent: Thursday, 17 September 2015 1:23 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: IPL Shutdown Problem
>
> Thanks Ant & Lizette.
>
> F OMVS,STOPPFS=ZFS command worked and we were able to bring down ZFS for
> one systemSYS3 and for other system SYS9 we are facing an issue.
>
> OMVS is down and we tried to issue STOPPFS=ZFS command and it's not
> allowing.
>
> RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9
>
> I think the system is out of sysplex now and still the below STC are
> running in SYS9.
>
>   ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
>
> Regards,
> Vinoth M
>
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Anthony Thompson
> Sent: Thursday, September 17, 2015 8:59 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: IPL Shutdown Problem
>
> Stop the ZFS address space. It should stop as part of OMVS shut down
> anyway, but that's probably post-JES2 completion at your site. Issue
> command F OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut
> down. Under z/OS 2.2, it is not recommended to run ZFS processing in its
> own address space.
>
> Ant.
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Lizette Koehler
> Sent: Thursday, 17 September 2015 12:53 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: IPL Shutdown Problem
>
> The list is not the best place for an urgent issue.  But we will try to
> help.
>
> If this is PRODUCTION, Just take a Stand alone dump and IPL.
> If this is any other system  - how long can you be down before you IPL.
>
> Normally I do the SA Dump and IPL.  I worry about why later.
>
> You do not want to spend a lot of time trying to resolve things when you
> are IPL'ing.  Especially if this is a critical system.
>
> You may need IBM's assistance in determine your shutdown issue, if you
> have not used IPCS on a Stand alone dump.
>
>
> Lizette
>
>
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> > On Behalf Of Meenakshi, Vinoth - CW
> > Sent: Wednesday, September 16, 2015 8:03 PM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: IPL Shutdown Problem
> >
> > Hi All,
> >
> > We are having issue with bringing down the JES2,two of the STC are
> &

Re: IPL Shutdown Problem

2015-09-17 Thread Shmuel Metz (Seymour J.) 
In
,
on 09/17/2015
   at 03:53 AM, "Meenakshi, Vinoth - CW"
 said:

>OMVS is down and we tried to issue STOPPFS=ZFS command and it's not
>allowing.

Issue it from a SYS9 console.

>RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9

You didn't tell us that you weere usiiing ROUTE. Next time around give
us the command that you issued, not a paraphrase.  -- 
 Shmuel (Seymour J.) Metz, SysProg and JOAT
 ISO position; see  
We don't care. We don't have to care, we're Congress.
(S877: The Shut up and Eat Your spam act of 2003)

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IPL Shutdown Problem

2015-09-17 Thread Lizette Koehler 
Do you have automation?  Is it used to shut down your system?

Please post your steps you use to shut down the system for an IPL.  Perhaps we 
can help enhance the process.

Is this the first time you had an issue with the shutdown? Or does that happen 
more often?

Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:53 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: IPL Shutdown Problem
> 
> Thanks Ant & Lizette.
> 
> F OMVS,STOPPFS=ZFS command worked and we were able to bring down ZFS for one
> systemSYS3 and for other system SYS9 we are facing an issue.
> 
> OMVS is down and we tried to issue STOPPFS=ZFS command and it's not allowing.
> 
> RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9
> 
> I think the system is out of sysplex now and still the below STC are running 
> in SYS9.
> 
>   ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Regards,
> Vinoth M
> 
> 
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Anthony Thompson
> Sent: Thursday, September 17, 2015 8:59 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: IPL Shutdown Problem
> 
> Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
> but
> that's probably post-JES2 completion at your site. Issue command F
> OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under
> z/OS 2.2, it is not recommended to run ZFS processing in its own address 
> space.
> 
> Ant.
> 
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Lizette Koehler
> Sent: Thursday, 17 September 2015 12:53 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: IPL Shutdown Problem
> 
> The list is not the best place for an urgent issue.  But we will try to help.
> 
> If this is PRODUCTION, Just take a Stand alone dump and IPL.
> If this is any other system  - how long can you be down before you IPL.
> 
> Normally I do the SA Dump and IPL.  I worry about why later.
> 
> You do not want to spend a lot of time trying to resolve things when you are 
> IPL'ing.
> Especially if this is a critical system.
> 
> You may need IBM's assistance in determine your shutdown issue, if you have 
> not
> used IPCS on a Stand alone dump.
> 
> 
> Lizette
> 
> 
> > -Original Message-
> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> > On Behalf Of Meenakshi, Vinoth - CW
> > Sent: Wednesday, September 16, 2015 8:03 PM
> > To: IBM-MAIN@LISTSERV.UA.EDU
> > Subject: IPL Shutdown Problem
> >
> > Hi All,
> >
> > We are having issue with bringing down the JES2,two of the STC are
> > running and it's not coming down. Even Purge command is not working.
> >
> >ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
> >   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> >
> > Even we can't able issue command from other systems.
> >
> > RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> >
> > Kindly guide us on this.
> >
> > Thanks.
> > Vinoth M
> 
> 

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IPL Shutdown Problem

2015-09-16 Thread Anthony Thompson 
Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
but that's probably post-JES2 completion at your site. Issue command F 
OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under 
z/OS 2.2, it is not recommended to run ZFS processing in its own address space.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, 17 September 2015 12:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are 
> running and it's not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IPL Shutdown Problem

2015-09-16 Thread J O Skip Robinson 
The problem is OP's shutdown logic. Not all tasks need to be shut down, and 
those that do not run under JES2 cannot be shut down using JES2 commands. The 
message 

   IEE707I $DA,XNOT EXECUTED

indicates that JES2 itself has already terminated and therefore cannot be 
called upon to shut down any other task. Since JES2 has already terminated, any 
tasks still running either do not need to be terminated (RACF task is one), or 
run SUB=MSTR and must be terminated via commands directly to the task itself.

.
.
.
J.O.Skip Robinson
Southern California Edison Company
Electric Dragon Team Paddler 
SHARE MVS Program Co-Manager
626-302-7535 Office
323-715-0595 Mobile
jo.skip.robin...@sce.com

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Wednesday, September 16, 2015 8:29 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
but that's probably post-JES2 completion at your site. Issue command F 
OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under 
z/OS 2.2, it is not recommended to run ZFS processing in its own address space.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, 17 September 2015 12:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are 
> running and it's not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IPL Shutdown Problem

2015-09-16 Thread Meenakshi, Vinoth - CW 
Thanks Ant & Lizette.

F OMVS,STOPPFS=ZFS command worked and we were able to bring down ZFS for one 
systemSYS3 and for other system SYS9 we are facing an issue.

OMVS is down and we tried to issue STOPPFS=ZFS command and it's not allowing.

RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9

I think the system is out of sysplex now and still the below STC are running in 
SYS9.

  ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
  SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9

Regards,
Vinoth M


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 8:59 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
but that's probably post-JES2 completion at your site. Issue command F 
OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under 
z/OS 2.2, it is not recommended to run ZFS processing in its own address space.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, 17 September 2015 12:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are 
> running and it's not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IPL Shutdown Problem

2015-09-16 Thread Anthony Thompson 
ROUTE command not working is a completely separate issue. It won't happen if 
that LPAR is outside of the sysplex. You'll need a console on that system. Use 
the HMC if you need to, assuming you have one. 

Try the F OMVS, STOPPFS=FZS command on a SYS9 console. F 
BPXOINIT,SHUTDOWN=FORKINIT should bring down both ZFS and OMVS.

$PJES2,ABEND if you absolutely have to.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Meenakshi, Vinoth - CW
Sent: Thursday, 17 September 2015 1:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Thanks Ant & Lizette.

F OMVS,STOPPFS=ZFS command worked and we were able to bring down ZFS for one 
systemSYS3 and for other system SYS9 we are facing an issue.

OMVS is down and we tried to issue STOPPFS=ZFS command and it's not allowing.

RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9

I think the system is out of sysplex now and still the below STC are running in 
SYS9.

  ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
  SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9

Regards,
Vinoth M


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 8:59 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
but that's probably post-JES2 completion at your site. Issue command F 
OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under 
z/OS 2.2, it is not recommended to run ZFS processing in its own address space.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, 17 September 2015 12:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are 
> running and it's not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IPL Shutdown Problem

2015-09-16 Thread Meenakshi, Vinoth - CW 
Hi Ant,

We couldn't able to access commands from master console or HMC, since the 
system went onto wait-state.

Central processor (CP) 0 is in a nonrestartable stopped state due to a System 
Control Program (SCP) initiated reset of the I/O interface for partition LPAR4. 
The disabled wait program status word (PSW) is 0002800040a2.

Could you assist how we move forward from here. Thanks

Regards,
Vinoth M

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 9:48 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

ROUTE command not working is a completely separate issue. It won't happen if 
that LPAR is outside of the sysplex. You'll need a console on that system. Use 
the HMC if you need to, assuming you have one. 

Try the F OMVS, STOPPFS=FZS command on a SYS9 console. F 
BPXOINIT,SHUTDOWN=FORKINIT should bring down both ZFS and OMVS.

$PJES2,ABEND if you absolutely have to.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Meenakshi, Vinoth - CW
Sent: Thursday, 17 September 2015 1:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Thanks Ant & Lizette.

F OMVS,STOPPFS=ZFS command worked and we were able to bring down ZFS for one 
systemSYS3 and for other system SYS9 we are facing an issue.

OMVS is down and we tried to issue STOPPFS=ZFS command and it's not allowing.

RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9

I think the system is out of sysplex now and still the below STC are running in 
SYS9.

  ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
  SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9

Regards,
Vinoth M


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 8:59 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
but that's probably post-JES2 completion at your site. Issue command F 
OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under 
z/OS 2.2, it is not recommended to run ZFS processing in its own address space.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, 17 September 2015 12:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are 
> running and it's not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IPL Shutdown Problem

2015-09-16 Thread Anthony Thompson 
Most typically, that wait state is entered when the system has been 
deliberately shut down by operators.

Re-IPL.

Ant.

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Meenakshi, Vinoth - CW
Sent: Thursday, 17 September 2015 2:40 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Hi Ant,

We couldn't able to access commands from master console or HMC, since the 
system went onto wait-state.

Central processor (CP) 0 is in a nonrestartable stopped state due to a System 
Control Program (SCP) initiated reset of the I/O interface for partition LPAR4. 
The disabled wait program status word (PSW) is 0002800040a2.

Could you assist how we move forward from here. Thanks

Regards,
Vinoth M

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 9:48 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

ROUTE command not working is a completely separate issue. It won't happen if 
that LPAR is outside of the sysplex. You'll need a console on that system. Use 
the HMC if you need to, assuming you have one. 

Try the F OMVS, STOPPFS=FZS command on a SYS9 console. F 
BPXOINIT,SHUTDOWN=FORKINIT should bring down both ZFS and OMVS.

$PJES2,ABEND if you absolutely have to.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Meenakshi, Vinoth - CW
Sent: Thursday, 17 September 2015 1:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Thanks Ant & Lizette.

F OMVS,STOPPFS=ZFS command worked and we were able to bring down ZFS for one 
systemSYS3 and for other system SYS9 we are facing an issue.

OMVS is down and we tried to issue STOPPFS=ZFS command and it's not allowing.

RESPONSE=SYS1  IEE618I  ROUTE   COMMAND REJECTED.  SYS9

I think the system is out of sysplex now and still the below STC are running in 
SYS9.

  ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
  SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9

Regards,
Vinoth M


-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Anthony Thompson
Sent: Thursday, September 17, 2015 8:59 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

Stop the ZFS address space. It should stop as part of OMVS shut down anyway, 
but that's probably post-JES2 completion at your site. Issue command F 
OMVS,STOPPFS=ZFS. SYSLOG should close as part of normal JES2 shut down. Under 
z/OS 2.2, it is not recommended to run ZFS processing in its own address space.

Ant. 

-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of Lizette Koehler
Sent: Thursday, 17 September 2015 12:53 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IPL Shutdown Problem

The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] 
> On Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are 
> running and it's not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
F

Re: IPL Shutdown Problem

2015-09-16 Thread Lizette Koehler 
The list is not the best place for an urgent issue.  But we will try to help.

If this is PRODUCTION, Just take a Stand alone dump and IPL.
If this is any other system  - how long can you be down before you IPL.

Normally I do the SA Dump and IPL.  I worry about why later.

You do not want to spend a lot of time trying to resolve things when you are 
IPL'ing.  Especially if this is a critical system.

You may need IBM's assistance in determine your shutdown issue, if you have not 
used IPCS on a Stand alone dump.


Lizette


> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Meenakshi, Vinoth - CW
> Sent: Wednesday, September 16, 2015 8:03 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: IPL Shutdown Problem
> 
> Hi All,
> 
> We are having issue with bringing down the JES2,two of the STC are running 
> and it's
> not coming down. Even Purge command is not working.
> 
>ZFS  STC03291 OMVS   15 EXECUTION  SYS9  SYS9
>   SYSLOG   STC09890 +MASTER+   15 EXECUTION  SYS9  SYS9
> 
> Even we can't able issue command from other systems.
> 
> RESPONSE=SYS9  IEE707I $DA,XNOT EXECUTED
> 
> Kindly guide us on this.
> 
> Thanks.
> Vinoth M

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN