Re: z/OS ISPF Panel to include System Name
And all these years I've been dedicating to executing MYHLQ.REXX(TSOSTART), which allocates extra libraries to SYSPROC and SYSEXEC, enters the Edit and View panels (in case of unresolved sessions) and whatever else I want done at logon each morning. Decades ago I read my way through the entire set of on-line ISPF documentation. Learned a lot from it, too. Then I went for at least a decade without looking at it again. During that decade IBM added stuff to ISPF (ISRFIND, for example), of which I stayed wholly ignorant because I knew it all. I suspect I haven’t caught back up yet. --- Bob Bridges, robhbrid...@gmail.com, cell 336 382-7313 /* ...the pilot, Maj. Derek Rydholm, gave me a Preflight Briefing in which he demonstrated, using a blackboard eraser, some of the aerial maneuvers we'd be doing. "We'll be simulating an attack situation like this," he'd say, moving the eraser around in rapid little arcs. "We'll be feeling some g-forces." ¶ I now realize that, right after we left the briefing room, the eraser threw up. -from _Warp Speed_, in which Dave Barry describes his ride in an F-16 */ -Original Message- From: IBM Mainframe Discussion List On Behalf Of Steve Horein Sent: Thursday, February 24, 2022 17:58 This man tells the truth. My ZSTART value: ISPF;SYSNAME ON;START 3.A;;SWAP NEXT --- On Thu, Feb 24, 2022 at 4:46 PM Lionel B. Dyck wrote: > Look up the ZSTART ISPF variable. You can set it up with a list of > commands to perform each time ISPF starts. > > You can also find an ISPF dialog that I wrote called ZSTART that makes > setting up and managing the ZSTART variable easy. It can be found on > my website and on my github site (see below). > > -Original Message- > From: Cameron Conacher > Sent: Thursday, February 24, 2022 02:51 PM > > Can I somehow add this to the ISPF startup command? > > ISPF SYSNAME ON? --> Nope > ISPF ‘SYSNAME ON’ --> Nope > > ISPF > SYSNAME ON --> O.K. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
If you have access to the ISPF Configuration Table (see ISPF Planning and Customizing) you can have ISPF default behavior display it: DEFAULT_SYSTEM_NAME Select to display the system name. The valid values are OFF or ON. The default is OFF. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
Hi Peter, We are on our z/OS v2r3 and it works and I recommend you check your ISPTLIB as it might cause issues if it is not correct libraries since it holds ISPCMDS. Regards,On Thursday, February 24, 2022, 05:58:09 p.m. EST, Steve Horein wrote: This man tells the truth. My ZSTART value: ISPF;SYSNAME ON;START 3.A;;SWAP NEXT On Thu, Feb 24, 2022 at 4:46 PM Lionel B. Dyck wrote: > Look up the ZSTART ISPF variable. You can set it up with a list of > commands to perform each time ISPF starts. > > You can also find an ISPF dialog that I wrote called ZSTART that makes > setting up and managing the ZSTART variable easy. It can be found on my > website and on my github site (see below). > > Lionel B. Dyck <>< > Website: https://www.lbdsoftware.com > Github: https://github.com/lbdyck > > “Worry more about your character than your reputation. Character is what > you are, reputation merely what others think you are.” - - - John Wooden > > -Original Message- > From: IBM Mainframe Discussion List On Behalf > Of Cameron Conacher > Sent: Thursday, February 24, 2022 02:51 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: z/OS ISPF Panel to include System Name > > Can I somehow add this to the ISPF startup command? > > ISPF SYSNAME ON? --> Nope > ISPF ‘SYSNAME ON’ --> Nope > > ISPF > SYSNAME ON --> O.K. > > > Thanks, > > …….Cameron > > > > > > From: IBM Mainframe Discussion List On Behalf > Of PINION, RICHARD W. > Sent: Thursday, February 24, 2022 3:24 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: [External] Re: z/OS ISPF Panel to include System Name > > I learn something new everyday! > > > -Original Message- > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Lionel B. Dyck > Sent: Thursday, February 24, 2022 3:22 PM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: Re: z/OS ISPF Panel to include System Name > > [External Email. Exercise caution when clicking links or opening > attachments.] > > You can also enter SYSNAME ON or OFF on the ISPF command line. > > > Lionel B. Dyck <>< > Website: > https://urldefense.com/v3/__https://www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$ > < > https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$ > > > Github: > https://urldefense.com/v3/__https://github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$ > < > https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$ > > > > “Worry more about your character than your reputation. Character is what > you are, reputation merely what others think you are.” - - - John Wooden > > -Original Message- > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of PINION, RICHARD W. > Sent: Thursday, February 24, 2022 02:18 PM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: Re: z/OS ISPF Panel to include System Name > > You can edit the source of the panel. You need to figure out where the > panel is coming from, in regards to your ISPF allocations (CLIST/REXX, > logon proc) > > -Original Message- > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Jasi Grewal > Sent: Thursday, February 24, 2022 3:13 PM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: z/OS ISPF Panel to include System Name > > [External Email. Exercise caution when clicking links or opening > attachments.] > > Hi, > Is there a way to replace the ispf panelid name on top left screen of zOS > ISPF Panel with System name. > - Is there a tool to include system name on top left or on right of the > screen when you are on primary panel or under any panels in zOS ISPF. > - I understand that you can have it on primary panel but am more > interested in other ispf panels. > Any information would be appreciated.Thank You in advance,Regards,Jasi > Grewal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email > to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the > message: INFO IBM-MAIN Confidentiality notice: > This e-mail message, including any attachments, may contain legally > privileged and/or confide
Re: z/OS ISPF Panel to include System Name
This man tells the truth. My ZSTART value: ISPF;SYSNAME ON;START 3.A;;SWAP NEXT On Thu, Feb 24, 2022 at 4:46 PM Lionel B. Dyck wrote: > Look up the ZSTART ISPF variable. You can set it up with a list of > commands to perform each time ISPF starts. > > You can also find an ISPF dialog that I wrote called ZSTART that makes > setting up and managing the ZSTART variable easy. It can be found on my > website and on my github site (see below). > > Lionel B. Dyck <>< > Website: https://www.lbdsoftware.com > Github: https://github.com/lbdyck > > “Worry more about your character than your reputation. Character is what > you are, reputation merely what others think you are.” - - - John Wooden > > -Original Message- > From: IBM Mainframe Discussion List On Behalf > Of Cameron Conacher > Sent: Thursday, February 24, 2022 02:51 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: z/OS ISPF Panel to include System Name > > Can I somehow add this to the ISPF startup command? > > ISPF SYSNAME ON? --> Nope > ISPF ‘SYSNAME ON’ --> Nope > > ISPF > SYSNAME ON --> O.K. > > > Thanks, > > …….Cameron > > > > > > From: IBM Mainframe Discussion List On Behalf > Of PINION, RICHARD W. > Sent: Thursday, February 24, 2022 3:24 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: [External] Re: z/OS ISPF Panel to include System Name > > I learn something new everyday! > > > -Original Message- > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Lionel B. Dyck > Sent: Thursday, February 24, 2022 3:22 PM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: Re: z/OS ISPF Panel to include System Name > > [External Email. Exercise caution when clicking links or opening > attachments.] > > You can also enter SYSNAME ON or OFF on the ISPF command line. > > > Lionel B. Dyck <>< > Website: > https://urldefense.com/v3/__https://www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$ > < > https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$ > > > Github: > https://urldefense.com/v3/__https://github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$ > < > https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$ > > > > “Worry more about your character than your reputation. Character is what > you are, reputation merely what others think you are.” - - - John Wooden > > -Original Message- > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of PINION, RICHARD W. > Sent: Thursday, February 24, 2022 02:18 PM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: Re: z/OS ISPF Panel to include System Name > > You can edit the source of the panel. You need to figure out where the > panel is coming from, in regards to your ISPF allocations (CLIST/REXX, > logon proc) > > -Original Message- > From: IBM Mainframe Discussion List IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Jasi Grewal > Sent: Thursday, February 24, 2022 3:13 PM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: z/OS ISPF Panel to include System Name > > [External Email. Exercise caution when clicking links or opening > attachments.] > > Hi, > Is there a way to replace the ispf panelid name on top left screen of zOS > ISPF Panel with System name. > - Is there a tool to include system name on top left or on right of the > screen when you are on primary panel or under any panels in zOS ISPF. > - I understand that you can have it on primary panel but am more > interested in other ispf panels. > Any information would be appreciated.Thank You in advance,Regards,Jasi > Grewal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email > to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the > message: INFO IBM-MAIN Confidentiality notice: > This e-mail message, including any attachments, may contain legally > privileged and/or confidential information. If you are not the intended > recipient(s), or the employee or agent responsible for delivery of this > message to the intended recipient(s), you are hereby notified that any > dissemination, distribution, or copying of this e-mail m
Re: z/OS ISPF Panel to include System Name
Look up the ZSTART ISPF variable. You can set it up with a list of commands to perform each time ISPF starts. You can also find an ISPF dialog that I wrote called ZSTART that makes setting up and managing the ZSTART variable easy. It can be found on my website and on my github site (see below). Lionel B. Dyck <>< Website: https://www.lbdsoftware.com Github: https://github.com/lbdyck “Worry more about your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List On Behalf Of Cameron Conacher Sent: Thursday, February 24, 2022 02:51 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name Can I somehow add this to the ISPF startup command? ISPF SYSNAME ON? --> Nope ISPF ‘SYSNAME ON’ --> Nope ISPF SYSNAME ON --> O.K. Thanks, …….Cameron From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 3:24 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: [External] Re: z/OS ISPF Panel to include System Name I learn something new everyday! -Original Message- From: IBM Mainframe Discussion List mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Lionel B. Dyck Sent: Thursday, February 24, 2022 3:22 PM To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> Subject: Re: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] You can also enter SYSNAME ON or OFF on the ISPF command line. Lionel B. Dyck <>< Website: https://urldefense.com/v3/__https://www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$<https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$> Github: https://urldefense.com/v3/__https://github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$<https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$> “Worry more about your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> Subject: Re: z/OS ISPF Panel to include System Name You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> Subject: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lis
Re: z/OS ISPF Panel to include System Name
Go to Settings - Identifier (Top Line) - Option 4 Screen Name - Put a / in front of Display system name and option 2 for default setting for SYSNAME. Thanks -Original Message- From: IBM Mainframe Discussion List On Behalf Of Ed Jaffe Sent: Thursday, February 24, 2022 3:43 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name ATTENTION: This e-mail came from an external source. Do not open attachments or click on links from unknown or unexpected emails. On 2/24/2022 12:49 PM, Farley, Peter x23353 wrote: > That must be a relatively new ISPF command. On our z/OS V2.3 system it gets > "Invalid Command" error. SYSNAME has been around for decades. Any chance some knucklehead removed it from your ISPCMDS command table? If so, you can always add it back in on your private command table. |Verb T Action | SYSNAME 0 SYSNAME -- Phoenix Software International Edward E. Jaffe 831 Parkview Drive North El Segundo, CA 90245 https://www.phoenixsoftware.com/ This e-mail message, including any attachments, appended messages and the information contained therein, is for the sole use of the intended recipient(s). If you are not an intended recipient or have otherwise received this email message in error, any use, dissemination, distribution, review, storage or copying of this e-mail message and the information contained therein is strictly prohibited. If you are not an intended recipient, please contact the sender by reply e-mail and destroy all copies of this email message and do not otherwise utilize or retain this email message or any or all of the information contained therein. Although this email message and any attachments or appended messages are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way from its opening or use. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN *** Disclaimer *** This communication (including all attachments) is solely for the use of the person to whom it is addressed and is a confidential AAA communication. If you are not the intended recipient, any use, distribution, printing, or copying is prohibited. If you received this email in error, please immediately delete it and notify the sender. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
On 2/24/2022 12:49 PM, Farley, Peter x23353 wrote: That must be a relatively new ISPF command. On our z/OS V2.3 system it gets "Invalid Command" error. SYSNAME has been around for decades. Any chance some knucklehead removed it from your ISPCMDS command table? If so, you can always add it back in on your private command table. |Verb T Action | SYSNAME 0 SYSNAME -- Phoenix Software International Edward E. Jaffe 831 Parkview Drive North El Segundo, CA 90245 https://www.phoenixsoftware.com/ This e-mail message, including any attachments, appended messages and the information contained therein, is for the sole use of the intended recipient(s). If you are not an intended recipient or have otherwise received this email message in error, any use, dissemination, distribution, review, storage or copying of this e-mail message and the information contained therein is strictly prohibited. If you are not an intended recipient, please contact the sender by reply e-mail and destroy all copies of this email message and do not otherwise utilize or retain this email message or any or all of the information contained therein. Although this email message and any attachments or appended messages are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way from its opening or use. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
From the ispf settings panel, click on I (identifier) -> select 4. System name -> put a / by display system name and select 2.on. Works for me. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Tony Harminc Sent: Thursday, February 24, 2022 2:13 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: [EXTERNAL] Re: z/OS ISPF Panel to include System Name On Thu, 24 Feb 2022 at 15:13, Jasi Grewal < 040674ae00fc-dmarc-requ...@listserv.ua.edu> wrote: > Is there a way to replace the ispf panelid name on top left screen of > zOS ISPF Panel with System name. >- Is there a tool to include system name on top left or on right of > the screen when you are on primary panel or under any panels in zOS ISPF. >- I understand that you can have it on primary panel but am more > interested in other ispf panels. > Any information would be appreciated.Thank You in advance,Regards,Jasi > Grewal. > I'm sure there is, but I just use the title bar on my TN3270 app to display stuff like that. Using Vista TN3270 from Tom Brennan Software, you can either set the elements of the title bar statically, or can insert all kinds of useful info such as the LUname or IP address you are connected to. Of course this info is not coming from the system you are logged on to, but it works on any kind of TN3270-supporting system, not just ISPF. I imagine that other TN3270 apps have similar features, though the implementation details will doubtless be different. Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
Ditto on that, I don't want to be on a production system when I start shutting stuff down. I use titles, border titles, and colosr to differentiate my TN3270 sessions. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Tony Harminc Sent: Thursday, February 24, 2022 4:13 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] On Thu, 24 Feb 2022 at 15:13, Jasi Grewal < 040674ae00fc-dmarc-requ...@listserv.ua.edu> wrote: > Is there a way to replace the ispf panelid name on top left screen of > zOS ISPF Panel with System name. >- Is there a tool to include system name on top left or on right of > the screen when you are on primary panel or under any panels in zOS ISPF. >- I understand that you can have it on primary panel but am more > interested in other ispf panels. > Any information would be appreciated.Thank You in advance,Regards,Jasi > Grewal. > I'm sure there is, but I just use the title bar on my TN3270 app to display stuff like that. Using Vista TN3270 from Tom Brennan Software, you can either set the elements of the title bar statically, or can insert all kinds of useful info such as the LUname or IP address you are connected to. Of course this info is not coming from the system you are logged on to, but it works on any kind of TN3270-supporting system, not just ISPF. I imagine that other TN3270 apps have similar features, though the implementation details will doubtless be different. Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
On Thu, 24 Feb 2022 at 15:13, Jasi Grewal < 040674ae00fc-dmarc-requ...@listserv.ua.edu> wrote: > Is there a way to replace the ispf panelid name on top left screen of zOS > ISPF Panel with System name. >- Is there a tool to include system name on top left or on right of the > screen when you are on primary panel or under any panels in zOS ISPF. >- I understand that you can have it on primary panel but am more > interested in other ispf panels. > Any information would be appreciated.Thank You in advance,Regards,Jasi > Grewal. > I'm sure there is, but I just use the title bar on my TN3270 app to display stuff like that. Using Vista TN3270 from Tom Brennan Software, you can either set the elements of the title bar statically, or can insert all kinds of useful info such as the LUname or IP address you are connected to. Of course this info is not coming from the system you are logged on to, but it works on any kind of TN3270-supporting system, not just ISPF. I imagine that other TN3270 apps have similar features, though the implementation details will doubtless be different. Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
sorry forgot to add, from primary option 0 then Identifier pull down Carmen On 2/24/2022 2:56 PM, Carmen Vitullo wrote: I get the same, but on my system upper left corner, we do modify ISR@PRIM but IIRC that command / option is available in the base ISR@PRIM check the Identifier pull down, from ISR@PRIM then option 4 for System name On 2/24/2022 2:51 PM, Bob Bridges wrote: Yeah, that's a new one to me too. Where does the sysname appear, then? I know about SCRNAME, of course. I thought I was going to get a chance to describe a REXX I wrote long ago that locates the DSN an ISPF member is in. You feed it the member name and DD (eg ISPPLIB), and it searches through all the libraries for that DD for that particular member. If/when it finds it, it throws up a View of it. But since this is so much easier, I guess I won't mention it :). --- Bob Bridges,robhbrid...@gmail.com, cell 336 382-7313 /* Westheimer's Discovery: A couple of months in the laboratory can save a couple of hours in the library. -Frank H Westheimer, chemistry professor (1912- ) */ -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 15:24 I learn something new everyday! -Original Message- From: IBM Mainframe Discussion List On Behalf Of Lionel B. Dyck Sent: Thursday, February 24, 2022 3:22 PM You can also enter SYSNAME ON or OFF on the ISPF command line. -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email tolists...@listserv.ua.edu with the message: INFO IBM-MAIN -- /I am not bound to win, but I am bound to be true. I am not bound to succeed, but I am bound to live by the light that I have. I must stand with anybody that stands right, and stand with him while he is right, and part with him when he goes wrong. *Abraham Lincoln*/ -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
I get the same, but on my system upper left corner, we do modify ISR@PRIM but IIRC that command / option is available in the base ISR@PRIM check the Identifier pull down, from ISR@PRIM then option 4 for System name On 2/24/2022 2:51 PM, Bob Bridges wrote: Yeah, that's a new one to me too. Where does the sysname appear, then? I know about SCRNAME, of course. I thought I was going to get a chance to describe a REXX I wrote long ago that locates the DSN an ISPF member is in. You feed it the member name and DD (eg ISPPLIB), and it searches through all the libraries for that DD for that particular member. If/when it finds it, it throws up a View of it. But since this is so much easier, I guess I won't mention it :). --- Bob Bridges,robhbrid...@gmail.com, cell 336 382-7313 /* Westheimer's Discovery: A couple of months in the laboratory can save a couple of hours in the library. -Frank H Westheimer, chemistry professor (1912- ) */ -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 15:24 I learn something new everyday! -Original Message- From: IBM Mainframe Discussion List On Behalf Of Lionel B. Dyck Sent: Thursday, February 24, 2022 3:22 PM You can also enter SYSNAME ON or OFF on the ISPF command line. -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email tolists...@listserv.ua.edu with the message: INFO IBM-MAIN -- /I am not bound to win, but I am bound to be true. I am not bound to succeed, but I am bound to live by the light that I have. I must stand with anybody that stands right, and stand with him while he is right, and part with him when he goes wrong. *Abraham Lincoln*/ -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
On the panel, or in a script? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Farley, Peter x23353 [031df298a9da-dmarc-requ...@listserv.ua.edu] Sent: Thursday, February 24, 2022 3:49 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name That must be a relatively new ISPF command. On our z/OS V2.3 system it gets "Invalid Command" error. Peter -Original Message- From: IBM Mainframe Discussion List On Behalf Of Carmen Vitullo Sent: Thursday, February 24, 2022 3:42 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name Bingo ! I found that out, not so long ago Carmen On 2/24/2022 2:22 PM, Lionel B. Dyck wrote: > You can also enter SYSNAME ON or OFF on the ISPF command line. > > > Lionel B. Dyck <>< > > -Original Message- > From: IBM Mainframe Discussion List On Behalf Of > PINION, RICHARD W. > Sent: Thursday, February 24, 2022 02:18 PM To:IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: z/OS ISPF Panel to include System Name > > You can edit the source of the panel. You need to figure out where > the panel is coming from, in regards to your ISPF allocations > (CLIST/REXX, logon proc) > > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Jasi Grewal > Sent: Thursday, February 24, 2022 3:13 PM To:IBM-MAIN@LISTSERV.UA.EDU > Subject: z/OS ISPF Panel to include System Name > > Hi, > Is there a way to replace the ispf panelid name on top left screen of zOS > ISPF Panel with System name. > - Is there a tool to include system name on top left or on right of the > screen when you are on primary panel or under any panels in zOS ISPF. > - I understand that you can have it on primary panel but am more > interested in other ispf panels. > Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
SYSNAME, but you might also want to look at the status area. The good news is that it displays more information; the bad news is that it covers more screen area. -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List [IBM-MAIN@LISTSERV.UA.EDU] on behalf of Jasi Grewal [040674ae00fc-dmarc-requ...@listserv.ua.edu] Sent: Thursday, February 24, 2022 3:12 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: z/OS ISPF Panel to include System Name Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
Works for me z/OS 2.3 at RSU2201 > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Farley, Peter x23353 > Sent: Thursday, February 24, 2022 12:50 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: z/OS ISPF Panel to include System Name > > That must be a relatively new ISPF command. On our z/OS V2.3 system it > gets "Invalid Command" error. > > Peter > > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Carmen Vitullo > Sent: Thursday, February 24, 2022 3:42 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: z/OS ISPF Panel to include System Name > > Bingo ! > > I found that out, not so long ago > > Carmen > > On 2/24/2022 2:22 PM, Lionel B. Dyck wrote: > > You can also enter SYSNAME ON or OFF on the ISPF command line. > > > > > > Lionel B. Dyck <>< > > > > -Original Message- > > From: IBM Mainframe Discussion List On > Behalf Of PINION, RICHARD W. > > Sent: Thursday, February 24, 2022 02:18 PM To:IBM- > m...@listserv.ua.edu > > Subject: Re: z/OS ISPF Panel to include System Name > > > > You can edit the source of the panel. You need to figure out where > > the panel is coming from, in regards to your ISPF allocations > > (CLIST/REXX, logon proc) > > > > -Original Message- > > From: IBM Mainframe Discussion List On > > Behalf Of Jasi Grewal > > Sent: Thursday, February 24, 2022 3:13 PM To:IBM- > m...@listserv.ua.edu > > Subject: z/OS ISPF Panel to include System Name > > > > Hi, > > Is there a way to replace the ispf panelid name on top left screen of zOS > ISPF Panel with System name. > > - Is there a tool to include system name on top left or on right of the > screen when you are on primary panel or under any panels in zOS ISPF. > > - I understand that you can have it on primary panel but am more > interested in other ispf panels. > > Any information would be appreciated.Thank You in advance,Regards,Jasi > Grewal. > -- > > This message and any attachments are intended only for the use of the > addressee and may contain information that is privileged and confidential. If > the reader of the message is not the intended recipient or an authorized > representative of the intended recipient, you are hereby notified that any > dissemination of this communication is strictly prohibited. If you have > received this communication in error, please notify us immediately by e-mail > and delete the message and any attachments from your system. > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
Yeah, that's a new one to me too. Where does the sysname appear, then? I know about SCRNAME, of course. I thought I was going to get a chance to describe a REXX I wrote long ago that locates the DSN an ISPF member is in. You feed it the member name and DD (eg ISPPLIB), and it searches through all the libraries for that DD for that particular member. If/when it finds it, it throws up a View of it. But since this is so much easier, I guess I won't mention it :). --- Bob Bridges, robhbrid...@gmail.com, cell 336 382-7313 /* Westheimer's Discovery: A couple of months in the laboratory can save a couple of hours in the library. -Frank H Westheimer, chemistry professor (1912- ) */ -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 15:24 I learn something new everyday! -Original Message- From: IBM Mainframe Discussion List On Behalf Of Lionel B. Dyck Sent: Thursday, February 24, 2022 3:22 PM You can also enter SYSNAME ON or OFF on the ISPF command line. -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
Can I somehow add this to the ISPF startup command? ISPF SYSNAME ON? --> Nope ISPF ‘SYSNAME ON’ --> Nope ISPF SYSNAME ON --> O.K. Thanks, …….Cameron From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 3:24 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: [External] Re: z/OS ISPF Panel to include System Name I learn something new everyday! -Original Message- From: IBM Mainframe Discussion List mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Lionel B. Dyck Sent: Thursday, February 24, 2022 3:22 PM To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> Subject: Re: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] You can also enter SYSNAME ON or OFF on the ISPF command line. Lionel B. Dyck <>< Website: https://urldefense.com/v3/__https://www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$<https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$> Github: https://urldefense.com/v3/__https://github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$<https://isolate.menlosecurity.com/1/3735928037/https:/urldefense.com/v3/__https:/github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$> “Worry more about your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> Subject: Re: z/OS ISPF Panel to include System Name You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> Subject: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN American Express made the following annotations This e-mail was sent to you by a representative of Amex Bank of Canada, P.O. Box 3204, Station "F", Toronto, ON, M1W 3W7, www.americanexpress.ca. If you no longer wish to receive these e-mails, please notify the sender by reply e-mail. This e-mail is solely for the intended recipient and may contain confidential or privileged information. If you are not the intended r
Re: z/OS ISPF Panel to include System Name
That must be a relatively new ISPF command. On our z/OS V2.3 system it gets "Invalid Command" error. Peter -Original Message- From: IBM Mainframe Discussion List On Behalf Of Carmen Vitullo Sent: Thursday, February 24, 2022 3:42 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name Bingo ! I found that out, not so long ago Carmen On 2/24/2022 2:22 PM, Lionel B. Dyck wrote: > You can also enter SYSNAME ON or OFF on the ISPF command line. > > > Lionel B. Dyck <>< > > -Original Message- > From: IBM Mainframe Discussion List On Behalf Of > PINION, RICHARD W. > Sent: Thursday, February 24, 2022 02:18 PM To:IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: z/OS ISPF Panel to include System Name > > You can edit the source of the panel. You need to figure out where > the panel is coming from, in regards to your ISPF allocations > (CLIST/REXX, logon proc) > > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Jasi Grewal > Sent: Thursday, February 24, 2022 3:13 PM To:IBM-MAIN@LISTSERV.UA.EDU > Subject: z/OS ISPF Panel to include System Name > > Hi, > Is there a way to replace the ispf panelid name on top left screen of zOS > ISPF Panel with System name. > - Is there a tool to include system name on top left or on right of the > screen when you are on primary panel or under any panels in zOS ISPF. > - I understand that you can have it on primary panel but am more > interested in other ispf panels. > Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
Bingo ! I found that out, not so long ago Carmen On 2/24/2022 2:22 PM, Lionel B. Dyck wrote: You can also enter SYSNAME ON or OFF on the ISPF command line. Lionel B. Dyck <>< Website:https://www.lbdsoftware.com Github:https://github.com/lbdyck “Worry more about your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM To:IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM To:IBM-MAIN@LISTSERV.UA.EDU Subject: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email tolists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email tolists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email tolists...@listserv.ua.edu with the message: INFO IBM-MAIN -- /I am not bound to win, but I am bound to be true. I am not bound to succeed, but I am bound to live by the light that I have. I must stand with anybody that stands right, and stand with him while he is right, and part with him when he goes wrong. *Abraham Lincoln*/ -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
Thank You Lionel so much and Live & Learn something new as I never came across that.Thank You again Lionel and Richard for the response. Regards, On Thursday, February 24, 2022, 03:23:58 p.m. EST, PINION, RICHARD W. wrote: I learn something new everyday! -Original Message- From: IBM Mainframe Discussion List On Behalf Of Lionel B. Dyck Sent: Thursday, February 24, 2022 3:22 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] You can also enter SYSNAME ON or OFF on the ISPF command line. Lionel B. Dyck <>< Website: https://urldefense.com/v3/__https://www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$ Github: https://urldefense.com/v3/__https://github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$ “Worry more about your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
I learn something new everyday! -Original Message- From: IBM Mainframe Discussion List On Behalf Of Lionel B. Dyck Sent: Thursday, February 24, 2022 3:22 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] You can also enter SYSNAME ON or OFF on the ISPF command line. Lionel B. Dyck <>< Website: https://urldefense.com/v3/__https://www.lbdsoftware.com__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNc6fGfvE$ Github: https://urldefense.com/v3/__https://github.com/lbdyck__;!!HnnddUIWDII9UQ!CiLcdnxKLTlSnZjQB79gJrhYAyLYgbEmnJOzog98V6nAcmlOQ5lSnRPSCNpNY4DT71M$ “Worry more about your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
You can also enter SYSNAME ON or OFF on the ISPF command line. Lionel B. Dyck <>< Website: https://www.lbdsoftware.com Github: https://github.com/lbdyck “Worry more about your character than your reputation. Character is what you are, reputation merely what others think you are.” - - - John Wooden -Original Message- From: IBM Mainframe Discussion List On Behalf Of PINION, RICHARD W. Sent: Thursday, February 24, 2022 02:18 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS ISPF Panel to include System Name You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS ISPF Panel to include System Name
You can edit the source of the panel. You need to figure out where the panel is coming from, in regards to your ISPF allocations (CLIST/REXX, logon proc) -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jasi Grewal Sent: Thursday, February 24, 2022 3:13 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: z/OS ISPF Panel to include System Name [External Email. Exercise caution when clicking links or opening attachments.] Hi, Is there a way to replace the ispf panelid name on top left screen of zOS ISPF Panel with System name. - Is there a tool to include system name on top left or on right of the screen when you are on primary panel or under any panels in zOS ISPF. - I understand that you can have it on primary panel but am more interested in other ispf panels. Any information would be appreciated.Thank You in advance,Regards,Jasi Grewal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN