Re: TESTAUTH LISTPSW not displaying CC for TAR
My mistake I have to break on the instruction that Sets the CC Sent from my iPhone On Nov 2, 2013, at 11:58 PM, Tony Harminc t...@harminc.net wrote: On 2 November 2013 21:47, MichealButz michealb...@optonline.net wrote: [cleaned up messy, space-wasting quoting] I am running a program under TESTAUTH which executes the TAR instruction, after executing the inst under TESTAUTH I do a LISTPSW the CC is always 0 Well the DOC says in the ALET is 0 then a CC should be set at 8 XRXXXTIE KEY XMWP AS CC PROGMASK EA BA INSTR ADDR 01118 1101 00 00 0 1 00065EB6 I think you don't understand the mapping of condition codes in the PSW to masks in the various branch instructions. According to the doc the CC should be a 8 Resulting Condition Code: 0 Access-list-entry token (ALET) is hex 1 ALET designates the dispatchable-unit access list and does not cause exceptions in access register translation (ART) 2 ALET designates the primary-space access list and does not cause exceptions in ART 3 ALET is 0001 hex or causes exceptions in ART Hint: do you see a mention of CC 8 in what you just quoted? Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
TESTAUTH LISTPSW not displaying CC for TAR
Hi, I am running a program under TESTAUTH which executes the TAR instruction, after executing the inst under TESTAUTH I do a LISTPSW the CC is always 0 Well the DOC says in the ALET is 0 then a CC should be set at 8 I run the following instruction under TESTAUTH LAM AR5,AR5,=F'0' TAR AR5,AR5 BC8,OKAY NOP OKAY OKAY DS0H I then a do a LISTPSW and LAM AR5,AR5,=F'0' TAR AR5,AR5 BC8,OKAY NOP OKAY OKAY DS0H IKJ57652I PSW LOCATED AT 8DD3F8 XRXXXTIE KEY XMWP AS CC PROGMASK EA BA INSTR ADDR 01118 1101 00 00 0 1 00065EB6 According to the doc the CC should be a 8 Resulting Condition Code: 0 Access-list-entry token (ALET) is hex 1 ALET designates the dispatchable-unit access list and does not cause exceptions in accessregister translation (ART) 2 ALET designates the primary-space access list and does not cause exceptions in ART 3 ALET is 0001 hex or causes exceptions in ART -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TESTAUTH LISTPSW not displaying CC for TAR
On 2 November 2013 21:47, MichealButz michealb...@optonline.net wrote: [cleaned up messy, space-wasting quoting] I am running a program under TESTAUTH which executes the TAR instruction, after executing the inst under TESTAUTH I do a LISTPSW the CC is always 0 Well the DOC says in the ALET is 0 then a CC should be set at 8 XRXXXTIE KEY XMWP AS CC PROGMASK EA BA INSTR ADDR 01118 1101 00 00 0 1 00065EB6 I think you don't understand the mapping of condition codes in the PSW to masks in the various branch instructions. According to the doc the CC should be a 8 Resulting Condition Code: 0 Access-list-entry token (ALET) is hex 1 ALET designates the dispatchable-unit access list and does not cause exceptions in access register translation (ART) 2 ALET designates the primary-space access list and does not cause exceptions in ART 3 ALET is 0001 hex or causes exceptions in ART Hint: do you see a mention of CC 8 in what you just quoted? Tony H. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
