According to the spec for v2 VBTs we should call MIPI_SEQ_DISPLAY_OFF
before sending SHUTDOWN, where as for v3 VBTs we should send SHUTDOWN
first.
Since the v2 order has known issues, we use the v3 order everywhere,
add a comment documenting this.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
drivers/gpu/drm/i915/intel_dsi.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 9b0c9152..7761806 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -708,6 +708,11 @@ static void intel_dsi_pre_disable(struct intel_encoder
*encoder,
intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
intel_panel_disable_backlight(intel_dsi->attached_connector);
+ /*
+ * XXX: According to the spec we should send SHUTDOWN before
+ * MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but testing in the field
+ * has shown that we should do this for v2 VBTs too?
+ */
if (is_vid_mode(intel_dsi)) {
/* Send Shutdown command to the panel in LP mode */
for_each_dsi_port(port, intel_dsi->ports)
@@ -739,6 +744,8 @@ static void intel_dsi_post_disable(struct intel_encoder
*encoder,
/*
* if disable packets are sent before sending shutdown packet then in
* some next enable sequence send turn on packet error is observed
+ * XXX spec specifies SHUTDOWN before MIPI_SEQ_DISPLAY_OFF for
+ * v3 VBTs, but not for v2 VBTs?
*/
intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF);
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
