RE: [IM-Talk] New Orthogon firmware breaks probe
Ian, Thanks for the update. Has there been any further progress? Is there an ETA on a fix? Tim Huffman Network Administrator Kruger Communications Office: 630-281-7100 ext. 335 Fax: 630-986-2495 Email: [EMAIL PROTECTED] -Original Message- From: InterMapper-Talk@list.dartware.com [mailto:InterMapper- [EMAIL PROTECTED] On Behalf Of Ian Struckhoff Sent: Friday, July 15, 2005 9:50 AM To: InterMapper Discussion Subject: Re: [IM-Talk] New Orthogon firmware breaks probe Tim, I wanted to let you know that we are working closely with Orthogon on this. There is a bug in their latest firmware, that we hope to be able to help them resolve. Thank you for bringing this to our attention. Ian Struckhoff Tech Support Dartware, LLC On Jul 6, 2005, at 12:59 PM, Tim Huffman wrote: Rich, We're using Intermapper server version InterMapper-4.3.1-1 on Fedora Core3. I'm using InterMapper Remote version 4.3.1 on Windows. Here's what I see on the Master side of the probe: Device Status Name: PTP-c11-c10-pri-orth DNS Name: (Unknown) Address: 172.16.100.91 Status: UP Protocol: Wireless - Orthogon Gemini (port 161) Up Time: 5 days, 0 hours, 29 minutes SysName: PTP-c11-c10-pri-orth Location: Core 11 (Schaumburg) Availability: 100 % (of 2 minutes, 31 seconds) Packet Loss: 0.0 % (of 21 total attempts) [Reset] Recent Loss: None Round-trip time: 13 msec Bridge Information Base Bridge Address: 00-04-56-00-07-13 Spanning Tree Root: None Root Cost: 0 Root Port: 0 STP Priority: 0 Orthogon Gemini Information Software Version: [N/A] Hardware Version: [N/A] IP Address: [N/A] Subnet Mask: [N/A] Gateway IP Address: [N/A] Target MAC Address: [N/A] Master-Slave Mode: Master Range: 0.0 km (0.0 miles) Active Channels: Tx: [N/A] / Rx: 0 Tx Modulation Mode: [N/A] Rx Modulation Mode: [N/A] Current/Max. Tx Power: 0.0/0.0 dBm Rx Power: 0.0 dBm Vector Error: 0.0 dB Link Loss: 0.0 dB Rx SNR: 0.0 dBm Last updated Jul 06, 11:49:16; interval: 30 seconds Reason: Vector Error high Here's what I see on the Slave side: Device Status Name: PTP-c10-c11-pri-orth DNS Name: (Unknown) Address: 172.16.100.90 Status: UP Protocol: Wireless - Orthogon Gemini (port 161) Up Time: 5 days, 0 hours, 29 minutes SysName: PTP-c10-c11-pri-orth Location: Elgin Availability: 100 % (of 3 minutes, 33 seconds) Packet Loss: 0.0 % (of 25 total attempts) [Reset] Recent Loss: None Round-trip time: 8 msec Bridge Information Base Bridge Address: 00-04-56-00-07-98 Spanning Tree Root: None Root Cost: 0 Root Port: 0 STP Priority: 0 Orthogon Gemini Information Software Version: [N/A] Hardware Version: [N/A] IP Address: [N/A] Subnet Mask: [N/A] Gateway IP Address: [N/A] Target MAC Address: [N/A] Master-Slave Mode: Master Range: 0.0 km (0.0 miles) Active Channels: Tx: [N/A] / Rx: 0 Tx Modulation Mode: [N/A] Rx Modulation Mode: [N/A] Current/Max. Tx Power: 0.0/0.0 dBm Rx Power: 0.0 dBm Vector Error: 0.0 dB Link Loss: 0.0 dB Rx SNR: 0.0 dBm Last updated Jul 06, 11:50:09; interval: 30 seconds Reason: Vector Error high Tim Huffman Network Administrator Kruger Communications Office: 630-281-7100 ext. 335 Fax: 630-986-2495 Email: [EMAIL PROTECTED] List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
Re: [IM-Talk] New Orthogon firmware breaks probe
Tim, I wanted to let you know that we are working closely with Orthogon on this. There is a bug in their latest firmware, that we hope to be able to help them resolve. Thank you for bringing this to our attention. Ian Struckhoff Tech Support Dartware, LLC On Jul 6, 2005, at 12:59 PM, Tim Huffman wrote: Rich, We're using Intermapper server version InterMapper-4.3.1-1 on Fedora Core3. I'm using InterMapper Remote version 4.3.1 on Windows. Here's what I see on the Master side of the probe: Device Status Name: PTP-c11-c10-pri-orth DNS Name: (Unknown) Address: 172.16.100.91 Status: UP Protocol: Wireless - Orthogon Gemini (port 161) Up Time: 5 days, 0 hours, 29 minutes SysName: PTP-c11-c10-pri-orth Location: Core 11 (Schaumburg) Availability: 100 % (of 2 minutes, 31 seconds) Packet Loss: 0.0 % (of 21 total attempts) [Reset] Recent Loss: None Round-trip time: 13 msec Bridge Information Base Bridge Address: 00-04-56-00-07-13 Spanning Tree Root: None Root Cost: 0 Root Port: 0 STP Priority: 0 Orthogon Gemini Information Software Version: [N/A] Hardware Version: [N/A] IP Address: [N/A] Subnet Mask: [N/A] Gateway IP Address: [N/A] Target MAC Address: [N/A] Master-Slave Mode: Master Range: 0.0 km (0.0 miles) Active Channels: Tx: [N/A] / Rx: 0 Tx Modulation Mode: [N/A] Rx Modulation Mode: [N/A] Current/Max. Tx Power: 0.0/0.0 dBm Rx Power: 0.0 dBm Vector Error: 0.0 dB Link Loss: 0.0 dB Rx SNR: 0.0 dBm Last updated Jul 06, 11:49:16; interval: 30 seconds Reason: Vector Error high Here's what I see on the Slave side: Device Status Name: PTP-c10-c11-pri-orth DNS Name: (Unknown) Address: 172.16.100.90 Status: UP Protocol: Wireless - Orthogon Gemini (port 161) Up Time: 5 days, 0 hours, 29 minutes SysName: PTP-c10-c11-pri-orth Location: Elgin Availability: 100 % (of 3 minutes, 33 seconds) Packet Loss: 0.0 % (of 25 total attempts) [Reset] Recent Loss: None Round-trip time: 8 msec Bridge Information Base Bridge Address: 00-04-56-00-07-98 Spanning Tree Root: None Root Cost: 0 Root Port: 0 STP Priority: 0 Orthogon Gemini Information Software Version: [N/A] Hardware Version: [N/A] IP Address: [N/A] Subnet Mask: [N/A] Gateway IP Address: [N/A] Target MAC Address: [N/A] Master-Slave Mode: Master Range: 0.0 km (0.0 miles) Active Channels: Tx: [N/A] / Rx: 0 Tx Modulation Mode: [N/A] Rx Modulation Mode: [N/A] Current/Max. Tx Power: 0.0/0.0 dBm Rx Power: 0.0 dBm Vector Error: 0.0 dB Link Loss: 0.0 dB Rx SNR: 0.0 dBm Last updated Jul 06, 11:50:09; interval: 30 seconds Reason: Vector Error high Tim Huffman Network Administrator Kruger Communications Office: 630-281-7100 ext. 335 Fax: 630-986-2495 Email: [EMAIL PROTECTED] List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
RE: [IM-Talk] New Orthogon firmware breaks probe
Rich, We're using Intermapper server version InterMapper-4.3.1-1 on Fedora Core3. I'm using InterMapper Remote version 4.3.1 on Windows. Here's what I see on the Master side of the probe: Device Status Name: PTP-c11-c10-pri-orth DNS Name: (Unknown) Address: 172.16.100.91 Status: UP Protocol: Wireless - Orthogon Gemini (port 161) Up Time: 5 days, 0 hours, 29 minutes SysName: PTP-c11-c10-pri-orth Location: Core 11 (Schaumburg) Availability: 100 % (of 2 minutes, 31 seconds) Packet Loss: 0.0 % (of 21 total attempts) [Reset] Recent Loss: None Round-trip time: 13 msec Bridge Information Base Bridge Address: 00-04-56-00-07-13 Spanning Tree Root: None Root Cost: 0 Root Port: 0 STP Priority: 0 Orthogon Gemini Information Software Version: [N/A] Hardware Version: [N/A] IP Address: [N/A] Subnet Mask: [N/A] Gateway IP Address: [N/A] Target MAC Address: [N/A] Master-Slave Mode: Master Range: 0.0 km (0.0 miles) Active Channels: Tx: [N/A] / Rx: 0 Tx Modulation Mode: [N/A] Rx Modulation Mode: [N/A] Current/Max. Tx Power: 0.0/0.0 dBm Rx Power: 0.0 dBm Vector Error: 0.0 dB Link Loss: 0.0 dB Rx SNR: 0.0 dBm Last updated Jul 06, 11:49:16; interval: 30 seconds Reason: Vector Error high Here's what I see on the Slave side: Device Status Name: PTP-c10-c11-pri-orth DNS Name: (Unknown) Address: 172.16.100.90 Status: UP Protocol: Wireless - Orthogon Gemini (port 161) Up Time: 5 days, 0 hours, 29 minutes SysName: PTP-c10-c11-pri-orth Location: Elgin Availability: 100 % (of 3 minutes, 33 seconds) Packet Loss: 0.0 % (of 25 total attempts) [Reset] Recent Loss: None Round-trip time: 8 msec Bridge Information Base Bridge Address: 00-04-56-00-07-98 Spanning Tree Root: None Root Cost: 0 Root Port: 0 STP Priority: 0 Orthogon Gemini Information Software Version: [N/A] Hardware Version: [N/A] IP Address: [N/A] Subnet Mask: [N/A] Gateway IP Address: [N/A] Target MAC Address: [N/A] Master-Slave Mode: Master Range: 0.0 km (0.0 miles) Active Channels: Tx: [N/A] / Rx: 0 Tx Modulation Mode: [N/A] Rx Modulation Mode: [N/A] Current/Max. Tx Power: 0.0/0.0 dBm Rx Power: 0.0 dBm Vector Error: 0.0 dB Link Loss: 0.0 dB Rx SNR: 0.0 dBm Last updated Jul 06, 11:50:09; interval: 30 seconds Reason: Vector Error high Tim Huffman Network Administrator Kruger Communications Office: 630-281-7100 ext. 335 Fax: 630-986-2495 Email: [EMAIL PROTECTED] -Original Message- From: InterMapper-Talk@list.dartware.com [mailto:InterMapper- [EMAIL PROTECTED] On Behalf Of Richard E. Brown Sent: Saturday, July 02, 2005 6:22 AM To: InterMapper-Talk@list.dartware.com Subject: Re: [IM-Talk] New Orthogon firmware breaks probe Tim: --- You wrote: Unfortunately, the Intermapper wireless probe doesn't seem to like it. We can't get stats from the slave side anymore. Any ideas? --- end of quote --- Yikes! We won't be able to look at this until after the 4 July holiday, but would you provide us (off-list, if you prefer) more details of what you see/don't see? For example, it'd be useful to have: - InterMapper version - Which OS (Windows, Mac, Linux) and version - What does the Status Window show (right-click to copy all the text) - Any other information you think might be relevant. Thanks. Rich Brown[EMAIL PROTECTED] Dartware, LLC http://www.dartware.com 10 Buck Road, PO Box 130 Telephone: 603-643-2268 Hanover, NH 03755-0130 USAFax: 603-643-2289 List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
Re: [IM-Talk] New Orthogon firmware breaks probe
Tim: --- You wrote: Unfortunately, the Intermapper wireless probe doesn't seem to like it. We can't get stats from the slave side anymore. Any ideas? --- end of quote --- Yikes! We won't be able to look at this until after the 4 July holiday, but would you provide us (off-list, if you prefer) more details of what you see/don't see? For example, it'd be useful to have: - InterMapper version - Which OS (Windows, Mac, Linux) and version - What does the Status Window show (right-click to copy all the text) - Any other information you think might be relevant. Thanks. Rich Brown[EMAIL PROTECTED] Dartware, LLC http://www.dartware.com 10 Buck Road, PO Box 130 Telephone: 603-643-2268 Hanover, NH 03755-0130 USAFax: 603-643-2289 List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
[IM-Talk] New Orthogon firmware breaks probe
Version 5840 of the firmware for the Orthogon Gemini was released today. It includes some very nice features. Unfortunately, the Intermapper wireless probe doesn't seem to like it. We can't get stats from the slave side anymore. Any ideas? Tim Huffman Network Administrator Kruger Communications Office: 630-281-7100 ext. 335 Fax: 630-986-2495 Email: [EMAIL PROTECTED] List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
