date:20130814

** Description changed:

  This bug is for tracking the version to be filled upload package. This
  bug will contain status and testing results related to that upload.
  
  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Saturday, 27. July 2013 16:04 UTC
  kernel-stable-master-bug:1205440
  kernel-stable-Certification-testing-end:Thursday, 01. August 2013 15:03 UTC
  kernel-stable-Prepare-package-end:Saturday, 10. August 2013 23:39 UTC
  kernel-stable-Promote-to-proposed-start:Saturday, 10. August 2013 23:39 UTC
  kernel-stable-Promote-to-proposed-end:Sunday, 11. August 2013 00:02 UTC
  kernel-stable-Verification-testing-start:Sunday, 11. August 2013 01:03 UTC
  kernel-stable-phase:Testing
  kernel-stable-Security-signoff-start:Monday, 12. August 2013 16:09 UTC
  kernel-stable-phase-changed:Monday, 12. August 2013 16:09 UTC
  kernel-stable-Verification-testing-end:Monday, 12. August 2013 16:09 UTC
  kernel-stable-Regression-testing-start:Monday, 12. August 2013 16:09 UTC
+ kernel-stable-Regression-testing-end:Wednesday, 14. August 2013 09:01 UTC

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-ti-omap4 in Ubuntu.
https://bugs.launchpad.net/bugs/1205673

Title:
  linux-ti-omap4: 3.5.0-230.46 -proposed tracker

Status in Kernel SRU Workflow:
  In Progress
Status in Kernel SRU Workflow certification-testing series:
  Invalid
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-security series:
  New
Status in Kernel SRU Workflow promote-to-updates series:
  New
Status in Kernel SRU Workflow regression-testing series:
  Fix Released
Status in Kernel SRU Workflow security-signoff series:
  In Progress
Status in Kernel SRU Workflow upload-to-ppa series:
  Fix Released
Status in Kernel SRU Workflow verification-testing series:
  Fix Released
Status in “linux-ti-omap4” package in Ubuntu:
  New
Status in “linux-ti-omap4” source package in Quantal:
  New
Status in “linux-ti-omap4” source package in Raring:
  New
Status in “linux-ti-omap4” source package in Saucy:
  New

Bug description:
  This bug is for tracking the version to be filled upload package.
  This bug will contain status and testing results related to that
  upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Saturday, 27. July 2013 16:04 UTC
  kernel-stable-master-bug:1205440
  kernel-stable-Certification-testing-end:Thursday, 01. August 2013 15:03 UTC
  kernel-stable-Prepare-package-end:Saturday, 10. August 2013 23:39 UTC
  kernel-stable-Promote-to-proposed-start:Saturday, 10. August 2013 23:39 UTC
  kernel-stable-Promote-to-proposed-end:Sunday, 11. August 2013 00:02 UTC
  kernel-stable-Verification-testing-start:Sunday, 11. August 2013 01:03 UTC
  kernel-stable-phase:Testing
  kernel-stable-Security-signoff-start:Monday, 12. August 2013 16:09 UTC
  kernel-stable-phase-changed:Monday, 12. August 2013 16:09 UTC
  kernel-stable-Verification-testing-end:Monday, 12. August 2013 16:09 UTC
  kernel-stable-Regression-testing-start:Monday, 12. August 2013 16:09 UTC
  kernel-stable-Regression-testing-end:Wednesday, 14. August 2013 09:01 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1205673/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212160] [NEW] 'cat /proc/asound/card0/codec0' cause kernel panic (battery mode)

2013-08-14 Thread Yang Kun (YK)

Public bug reported:

Kernel panic if;
1. boot up system with battery mode (no AC connected)
2. insert HDMI cable
3. execute 'cat /proc/asound/card0/codec0'

** Affects: hwe-next
 Importance: Undecided
 Status: New

** Affects: linux (Ubuntu)
 Importance: High
 Assignee: David Henningsson (diwic)
 Status: New


** Tags: blocks-hwcert-enablement

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212160

Title:
   'cat /proc/asound/card0/codec0' cause kernel panic (battery mode)

Status in HWE Next Project:
  New
Status in “linux” package in Ubuntu:
  New

Bug description:
  Kernel panic if;
  1. boot up system with battery mode (no AC connected)
  2. insert HDMI cable
  3. execute 'cat /proc/asound/card0/codec0'

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1212160/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566193] Re: luminosity screen on a laptop cannot be set

2013-08-14 Thread Marc Bristiel

Since the computer affected by the bug is still run under 12.04 I can't
test the dev version.

Bug still exists in 12.04, Linux [...] 3.2.0-51-generic #77-Ubuntu SMP
Wed Jul 24 20:21:10 UTC 2013 i686 i686 i386 GNU/Linux

And workaround boot parameter acpi_backlight=vendor still works.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566193

Title:
  luminosity screen on a laptop cannot be set

Status in The Linux Kernel:
  Fix Released
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  After upgrade from karmic to lucid, luminosity cannot be set on a
  laptop (Asus Pro 5JI).

  When pressing the luminosity keys, dmesg send the following output :

  8---
  [  209.309032] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0005D) is 
beyond end of object (20090903/exoparg2-445)
  [  209.309047] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701bb28), AE_AML_BUFFER_LIMIT
  [  209.309115] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7016cd8), AE_AML_BUFFER_LIMIT
  [  209.309186] ACPI Error: Evaluating _BCM failed (20090903/video-528)
  [  209.309192] ACPI: Failed to switch the brightness
  [  209.314634] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (00064) is 
beyond end of object (20090903/exoparg2-445)
  [  209.314643] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701bb28), AE_AML_BUFFER_LIMIT
  [  209.314683] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7016cd8), AE_AML_BUFFER_LIMIT
  [  209.314723] ACPI Error: Evaluating _BCM failed (20090903/video-528)
  [  209.315943] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0005D) is 
beyond end of object (20090903/exoparg2-445)
  [  209.315952] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701bb28), AE_AML_BUFFER_LIMIT
  [  209.315992] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7016cd8), AE_AML_BUFFER_LIMIT
  [  209.316489] ACPI Error: Evaluating _BCM failed (20090903/video-528)
  [  209.325119] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (00064) is 
beyond end of object (20090903/exoparg2-445)
  [  209.325128] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.SBRG.EC0_.STBR] (Node f701bb28), AE_AML_BUFFER_LIMIT
  [  209.325167] ACPI Error (psparse-0537): Method parse/execution failed 
[\_SB_.PCI0.VGA_.LCDD._BCM] (Node f7016cd8), AE_AML_BUFFER_LIMIT
  [  209.325207] ACPI Error: Evaluating _BCM failed (20090903/video-528)
  8---

  Error persists even after a reboot.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/566193/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1175504] Re: [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure

2013-08-14 Thread Tobiasz Jarczyk

W dniu 14.08.2013 00:42, Rafael J. Wysocki pisze:
 On Tuesday, August 13, 2013 03:29:47 PM Tobiasz 'dotnokato' Jarczyk wrote:
 Hi,
 I have tested it with the most recent kernel (3.11.rc5) and I am still
 experiencing this issue.
 Well, for me suspend with 3.11-rc5 breaks on that box too, but with 3.10.6 it
 actually works up to a VT switch that doesn't (it resumes to a black screen,
 but switching to VT1 and back to X helps).  A couple of other things don't
 work on it with 3.10.6, sadly.

 I have openSUSE 12.3 installed on it.

 Thanks,
 Rafael

I get the same behavior when using 3.10.6 and 3.11.rc5. The system fails 
to suspend for the second time (first time always works fine).
When waking from the first suspend I get screen flickering and just like 
you wrote, switching to VT1 and back to X helps.

I have Ubuntu Gnome 13.10.

Pozdrawiam / Regards
Tobiasz dotnokato Jarczyk

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1175504

Title:
  [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume
  failure

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Got this after failed suspend.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-19-generic 3.8.0-19.29
  ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8
  Uname: Linux 3.8.0-19-generic x86_64
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  dotnokato   1756 F pulseaudio
  Date: Thu May  2 10:11:29 2013
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=ce4acd9b-ecba-4931-baa2-0c2d6409dbf6
  InstallationDate: Installed on 2012-10-06 (207 days ago)
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120926)
  InterpreterPath: /usr/bin/python3.3
  Lsusb:
   Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
   Bus 003 Device 003: ID 04b4:0033 Cypress Semiconductor Corp. Mouse
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)
  MarkForUpload: True
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic 
root=UUID=4f0c1391-e243-4e37-aaab-52625df3e3bd ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-19-generic N/A
   linux-backports-modules-3.8.0-19-generic  N/A
   linux-firmware1.106
  SourcePackage: linux
  Title: [Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD)] suspend/resume failure
  UpgradeStatus: Upgraded to raring on 2013-03-09 (53 days ago)
  UserGroups:
   
  dmi.bios.date: 05/08/2007
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68TT2 Ver. F.07
  dmi.board.name: 30B0
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 40.15
  dmi.chassis.asset.tag: CNU7110B09
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68TT2Ver.F.07:bd05/08/2007:svnHewlett-Packard:pnHPCompaqnx6325(EY349EA#AKD):pvrF.07:rvnHewlett-Packard:rn30B0:rvrKBCVersion40.15:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP Compaq nx6325 (EY349EA#AKD)
  dmi.product.version: F.07
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1175504/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1210104] Re: Intel FakeRAID Regression in Kubuntu 12.04 with Linux 3.2.0-51

2013-08-14 Thread Ben McCann

I can't test 3.2.46 because there are no amd64 packages available in
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.2.46-precise. (There
were no Intel CPU packages at all). I did test 3.2.47 and 3.2.48 images
and *both* of them fail to detect my Intel fakeraid array.

I also looked into updating my BIOS, as suggested by penalvch, and I've
decided *not* to upgrade. Too many horror stories about broken systems
after doing the upgrade including really basic stuff like detecting
Nvidia video cards, overclock failures, higher CPU temps, etc.

I'm also concerned that a BIOS upgrade will wipe the Intel raid state
from the BIOS and hence force me to rebuild the array from scratch. I'd
rather not do that either.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210104

Title:
  Intel FakeRAID *Regression* in Kubuntu 12.04 with Linux 3.2.0-51

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I have been using Intel FakeRAID on an Asus Z77 motherboard on Kubuntu
  12.04 for months. I'm using the MDADM version and not DMRAID. It has
  been working fine other than a couple minor issues with clean
  shutdowns that I fixed by tweaking a couple of the scripts under /etc.

  I upgraded to the latest Linux kernel (3.2.0-51) and my FakeRAID
  stopped working, probably because auto-detection failed to see the
  RAID array. Everything works fine with the previous kernel image,
  3.2.0-49.

  Here is /proc/mdstat with the 3.2.0-49 generic kernel image:

  Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] 
[raid10] 
  md126 : active raid1 sdb[1] sdc[0]
  976758784 blocks super external:/md127/0 [2/2] [UU]

  md127 : inactive sdb[1](S) sdc[0](S)
  6306 blocks super external:imsm

  The /proc/mdstat file is empty (other than listing personalities) in
  3.2.0-51. Note that the sdb and sdc drives are recognized by 3.2.0-51,
  and their partition tables look reasonable, so I don't see any issues
  with 3.2.0-51 actually seeing the physical drives. The problem appears
  to be that the MD driver doesn't detect the external RAID (aka 'imsm')
  metadata created by Intel fakeraid.

  Here's the additional data requested for new bug reports:

  lsb_release -rd
  Description:Ubuntu 12.04.2 LTS
  Release:12.04

  apt-cache policy linux-image-3.2.0-51-generic
  linux-image-3.2.0-51-generic:
Installed: 3.2.0-51.77
Candidate: 3.2.0-51.77
Version table:
   *** 3.2.0-51.77 0
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  500 http://security.ubuntu.com/ubuntu/ precise-security/main amd64 
Packages
  100 /var/lib/dpkg/status

  FWIW, here's the apt-cache data on the previous kernel where fakeraid
  worked correctly:

  apt-cache policy linux-image-3.2.0-49-generic
  linux-image-3.2.0-49-generic:
Installed: 3.2.0-49.75
Candidate: 3.2.0-49.75
Version table:
   *** 3.2.0-49.75 0
  500 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 
Packages
  100 /var/lib/dpkg/status

  I will attach the kernel.log for booting 3.2.0-49 and 3.2.0-51. I've
  looked at them and all I see is that 3.2.0-49 'binds' the RAID array
  components and 3.2.0-51 doesn't. Here's a snippet from 3.2.0-49 where
  it starts my RAID. This is absent in 3.2.0-51.

  Aug  6 06:53:46 canopus kernel: [2.088509] md: bindsdb
  Aug  6 06:53:46 canopus kernel: [2.150987] md: bindsdc
  Aug  6 06:53:46 canopus kernel: [2.151022] md: bindsdb
  Aug  6 06:53:46 canopus kernel: [2.151746] md: raid1 personality 
registered for level 1
  Aug  6 06:53:46 canopus kernel: [2.152167] bio: create slab bio-1 at 1
  Aug  6 06:53:46 canopus kernel: [2.152239] md/raid1:md126: active with 2 
out of 2 mirrors
  Aug  6 06:53:46 canopus kernel: [2.152249] md126: detected capacity 
change from 0 to 1000200994816
  Aug  6 06:53:46 canopus kernel: [2.153111]  md126: p1 p2 p3 p4  p5 p6 p7 


  Any suggestions on how to troubleshoot and/or fix this? There's no point 
bisecting the kernel images given the regression has just appeared in 3.2.0-51 
and, AFAIK, there was never a release of a '3.2.0-50' kernel.
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu17.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  bmccann2893 F pulseaudio
   /dev/snd/controlC0:  bmccann2893 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xf743 irq 51'
 Mixer name : 'Realtek ALC892'
 Components : 'HDA:10ec0892,104384fb,00100302'
 Controls  : 44
 Simple ctrls  : 21
  Card1.Amixer.info:
   Card hw:1 'NVidia'/'HDA NVidia at 0xf708 irq 17'
 Mixer name : 'Nvidia GPU 41 HDMI/DP'
 Components :

[Kernel-packages] [Bug 1176379] Re: Streaming videos over LAN with GVFS often locks up VLC Media Player in Ubuntu 13.04

2013-08-14 Thread Jani Holmström

Updated to Ubuntu 13.04 (32-bit) from 12.04. - now having this same VLC
issue.

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1176379

Title:
Streaming videos over LAN with GVFS often locks up VLC Media Player in
Ubuntu 13.04

Status in “linux” package in Ubuntu:
Incomplete

Bug description:
Ubuntu 13.04 64 bit
VLC Media Player 2.0.6
3.8.0-19-generic

In Nautilus when I navigate to smb://ip.address.of.server and click on
an MP4 video, VLC locks up about 90% of the time and does not play the
video. If I kill the PID, it fails to disappear. Even if I kill -9 it,
no difference. Eventually ps -A reveals a bunch of vlc defunct
instances, which is typically 1 instance per failed video playback
attempt. Sometimes VLC works fine and it will successfully play the
video, but it's quite rare.

Talking with some of the VLC developers it was suggested that it's a
FUSE or some sort of backend issue, likely originating from the kernel
itself. VLC has no problems playing the video locally, and VLC also
has no problems playing the same MP4 files over GVFS on another laptop
running 12.04 here.

I'm able to duplicate the issue with other AVI files as well, not just
MP4. When VLC does its lockup, CTRL Q does not work to close the
program, however ALT F4 does. When closing VLC it still leaves a VLC
icon in the upper taskbar. At this point like I mentioned above, even
going to terminal to kill these processes does nothing. So far a
reboot of the machine is the only way to really nuke these hanging
instances.

On my Ubuntu 13.04 laptop I set up AutoFS with CIFS (SMB), which is
the on-demand way to mount shares automatically without having to
initiate a GVFS-based connection each time. I have had absolutely zero
problems using AutoFS with any video playing back on VLC. Between this
and what I read in regard to GVFS, FUSE, VLC, etc., it stands to
suggest that perhaps the issue isn't with VLC but somewhere a bit
deeper.

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-19-generic 3.8.0-19.30
ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8
Uname: Linux 3.8.0-19-generic x86_64
ApportVersion: 2.9.2-0ubuntu8
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: jason 2276 F pulseaudio
/dev/snd/pcmC0D0p: jason 2276 F...m pulseaudio
Date: Sat May 4 12:49:32 2013
HibernationDevice: RESUME=UUID=7951a743-bc64-43d0-86df-3913c100b62a
InstallationDate: Installed on 2013-04-30 (4 days ago)
InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
MachineType: ASUSTeK COMPUTER INC. K56CA
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=set
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic
root=UUID=d6b1d62c-a985-4b0d-982a-fb3ed4d68775 ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.8.0-19-generic N/A
linux-backports-modules-3.8.0-19-generic N/A
linux-firmware1.106
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/13/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: K56CA.208
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: K56CA
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK COMPUTER INC.
dmi.chassis.version: 1.0
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrK56CA.208:bd11/13/2012:svnASUSTeKCOMPUTERINC.:pnK56CA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK56CA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
dmi.product.name: K56CA
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1176379/+subscriptions

--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212169] [NEW] Shutdown triggers standby on lenovo x230 with lid closed on docking station

2013-08-14 Thread James Page

Public bug reported:

I generally use my x230 attached to a docking station + external monitor
etc.

Using the restart or shutdown options from with Ubuntu results in the
laptop going into standby mode if the lid of the laptop is closed.

Opening the lid wakes up OK at which point the requested action does
complete.

ProblemType: Bug
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-1-generic 3.11.0-1.4
ProcVersionSignature: Ubuntu 3.11.0-1.4-generic 3.11.0-rc4
Uname: Linux 3.11.0-1-generic x86_64
ApportVersion: 2.12-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  jamespage   2944 F pulseaudio
 /dev/snd/controlC0:  jamespage   2944 F pulseaudio
Date: Wed Aug 14 10:26:17 2013
EcryptfsInUse: Yes
HibernationDevice: RESUME=UUID=9cabca8b-d2e3-4f65-a113-3c165c5ecbc6
InstallationDate: Installed on 2013-04-23 (112 days ago)
InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130423)
MachineType: LENOVO 2324CTO
MarkForUpload: True
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-1-generic.efi.signed 
root=UUID=88b94abf-33eb-4e05-888d-9dacbe025054 ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.11.0-1-generic N/A
 linux-backports-modules-3.11.0-1-generic  N/A
 linux-firmware1.113
SourcePackage: linux
UpgradeStatus: Upgraded to saucy on 2013-06-15 (59 days ago)
dmi.bios.date: 01/14/2013
dmi.bios.vendor: LENOVO
dmi.bios.version: G2ET91WW (2.51 )
dmi.board.asset.tag: Not Available
dmi.board.name: 2324CTO
dmi.board.vendor: LENOVO
dmi.board.version: Win8 Pro DPK TPG
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvrG2ET91WW(2.51):bd01/14/2013:svnLENOVO:pn2324CTO:pvrThinkPadX230:rvnLENOVO:rn2324CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 2324CTO
dmi.product.version: ThinkPad X230
dmi.sys.vendor: LENOVO

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug saucy

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212169

Title:
  Shutdown triggers standby on lenovo x230 with lid closed on docking
  station

Status in “linux” package in Ubuntu:
  New

Bug description:
  I generally use my x230 attached to a docking station + external
  monitor etc.

  Using the restart or shutdown options from with Ubuntu results in the
  laptop going into standby mode if the lid of the laptop is closed.

  Opening the lid wakes up OK at which point the requested action does
  complete.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-1-generic 3.11.0-1.4
  ProcVersionSignature: Ubuntu 3.11.0-1.4-generic 3.11.0-rc4
  Uname: Linux 3.11.0-1-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jamespage   2944 F pulseaudio
   /dev/snd/controlC0:  jamespage   2944 F pulseaudio
  Date: Wed Aug 14 10:26:17 2013
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=9cabca8b-d2e3-4f65-a113-3c165c5ecbc6
  InstallationDate: Installed on 2013-04-23 (112 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130423)
  MachineType: LENOVO 2324CTO
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-1-generic.efi.signed 
root=UUID=88b94abf-33eb-4e05-888d-9dacbe025054 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-1-generic N/A
   linux-backports-modules-3.11.0-1-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-06-15 (59 days ago)
  dmi.bios.date: 01/14/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G2ET91WW (2.51 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 2324CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG2ET91WW(2.51):bd01/14/2013:svnLENOVO:pn2324CTO:pvrThinkPadX230:rvnLENOVO:rn2324CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 2324CTO
  dmi.product.version: ThinkPad X230
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212169/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212160] Missing required logs.

This bug is missing log files that will aid in diagnosing the problem.
From a terminal window please run:

apport-collect 1212160

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212160

Title:
   'cat /proc/asound/card0/codec0' cause kernel panic (battery mode)

Status in HWE Next Project:
  New
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Kernel panic if;
  1. boot up system with battery mode (no AC connected)
  2. insert HDMI cable
  3. execute 'cat /proc/asound/card0/codec0'

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1212160/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1140716] Re: [regression] 3.5.0-26-generic and 3.2.0-39-generic GPU hangs on Sandybridge

2013-08-14 Thread zetxx

same problem here

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1140716

Title:
  [regression] 3.5.0-26-generic and  3.2.0-39-generic GPU hangs on
  Sandybridge

Status in The Linux Kernel:
  Invalid
Status in “linux” package in Ubuntu:
  Invalid
Status in “linux-lts-quantal” package in Ubuntu:
  Invalid
Status in “linux” source package in Precise:
  Fix Released
Status in “linux-lts-quantal” source package in Precise:
  Fix Released
Status in “linux” source package in Quantal:
  Fix Released
Status in “linux-lts-quantal” source package in Quantal:
  Invalid
Status in “linux” source package in Raring:
  Confirmed
Status in “linux-lts-quantal” source package in Raring:
  Invalid
Status in “linux” package in Debian:
  New
Status in “linux” package in Fedora:
  Unknown

Bug description:
  I'm getting errors about GPU hangs every minute or so (usually only
  when using FF and scrolling a webpage or something). I also get an
  annoying ubuntu dialog saying there is a system error.

  This didn't happen with 3.5.0-24-generic.

  Here is the dmesg:
  [15169.033709] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [15169.034517] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [15628.480216] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [15628.480570] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [15844.231372] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [15844.231773] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [20173.232593] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [20173.233211] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [26285.650393] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [26285.650980] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [26285.658405] [ cut here ]
  [26285.658472] WARNING: at 
/build/buildd/linux-3.5.0/drivers/gpu/drm/i915/intel_pm.c:2505 
gen6_enable_rps+0x706/0x710 [i915]()
  [26285.658474] Hardware name: SATELLITE Z830
  [26285.658476] Modules linked in: sdhci_pci sdhci btrfs zlib_deflate 
libcrc32c ufs qnx4 hfsplus hfs minix ntfs msdos jfs xfs reiserfs ext2 
snd_hda_codec_hdmi snd_hda_codec_realtek joydev btusb coretemp kvm_intel kvm 
arc4 ghash_clmulni_intel aesni_intel cryptd aes_x86_64 snd_hda_intel 
snd_hda_codec snd_hwdep uvcvideo snd_pcm videobuf2_core microcode videodev bnep 
iwlwifi videobuf2_vmalloc snd_seq_midi psmouse videobuf2_memops snd_rawmidi 
rfcomm pcspkr snd_seq_midi_event serio_raw snd_seq bluetooth mac80211 snd_timer 
snd_seq_device i915 drm_kms_helper cfg80211 drm toshiba_acpi snd sparse_keymap 
soundcore wmi i2c_algo_bit toshiba_bluetooth snd_page_alloc parport_pc mei 
video mac_hid lpc_ich ppdev nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc 
lp parport e1000e ahci libahci [last unloaded: sdhci]
  [26285.658537] Pid: 23433, comm: kworker/u:0 Not tainted 3.5.0-26-generic 
#40-Ubuntu
  [26285.658539] Call Trace:
  [26285.658549]  [81051bef] warn_slowpath_common+0x7f/0xc0
  [26285.658553]  [81051c4a] warn_slowpath_null+0x1a/0x20
  [26285.658569]  [a02d32e6] gen6_enable_rps+0x706/0x710 [i915]
  [26285.658584]  [a02bf3f6] intel_modeset_init_hw+0x66/0xa0 [i915]
  [26285.658595]  [a02954b4] i915_reset+0x1a4/0x6e0 [i915]
  [26285.658601]  [8101257b] ? __switch_to+0x12b/0x420
  [26285.658612]  [a029a943] i915_error_work_func+0xc3/0x110 [i915]
  [26285.658618]  [8107097a] process_one_work+0x12a/0x420
  [26285.658629]  [a029a880] ? gen6_pm_rps_work+0xe0/0xe0 [i915]
  [26285.658632]  [8107152e] worker_thread+0x12e/0x2f0
  [26285.658636]  [81071400] ? manage_workers.isra.26+0x200/0x200
  [26285.658640]  [81076023] kthread+0x93/0xa0
  [26285.658644]  [8168a3e4] kernel_thread_helper+0x4/0x10
  [26285.658649]  [81075f90] ? kthread_freezable_should_stop+0x70/0x70
  [26285.658652]  [8168a3e0] ? gs_change+0x13/0x13
  [26285.658654] ---[ end trace 59c6162fdfcbffee ]---
  [26756.021167] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [26756.021426] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [26766.014093] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [26766.014397] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [26932.376233] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... 
GPU hung
  [26932.376544] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [26932.384285] [ cut here ]
  [26932.384354] WARNING: at 
/build/buildd/linux-3.5.0/drivers/gpu/drm/i915/intel_pm.c:2505 
gen6_enable_rps+0x706/0x710 [i915]()
  [26932.384356] Hardware name: SATELLITE Z830
  [26932.384358] Modules linked in: sdhci_pci sdhci btrfs zlib_deflate

[Kernel-packages] [Bug 1212169] Status changed to Confirmed

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212169

Title:
  Shutdown triggers standby on lenovo x230 with lid closed on docking
  station

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  I generally use my x230 attached to a docking station + external
  monitor etc.

  Using the restart or shutdown options from with Ubuntu results in the
  laptop going into standby mode if the lid of the laptop is closed.

  Opening the lid wakes up OK at which point the requested action does
  complete.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-1-generic 3.11.0-1.4
  ProcVersionSignature: Ubuntu 3.11.0-1.4-generic 3.11.0-rc4
  Uname: Linux 3.11.0-1-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jamespage   2944 F pulseaudio
   /dev/snd/controlC0:  jamespage   2944 F pulseaudio
  Date: Wed Aug 14 10:26:17 2013
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=9cabca8b-d2e3-4f65-a113-3c165c5ecbc6
  InstallationDate: Installed on 2013-04-23 (112 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130423)
  MachineType: LENOVO 2324CTO
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-1-generic.efi.signed 
root=UUID=88b94abf-33eb-4e05-888d-9dacbe025054 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-1-generic N/A
   linux-backports-modules-3.11.0-1-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-06-15 (59 days ago)
  dmi.bios.date: 01/14/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G2ET91WW (2.51 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 2324CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG2ET91WW(2.51):bd01/14/2013:svnLENOVO:pn2324CTO:pvrThinkPadX230:rvnLENOVO:rn2324CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 2324CTO
  dmi.product.version: ThinkPad X230
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212169/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1155443] Re: RTL8192se kernel driver unstable in low power mode

David Cameron Staples, could you please confirm this issue exists with
the latest development release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ . If the issue remains,
could you please run the following command in the development release
from a Terminal (Applications-Accessories-Terminal), as it will
automatically gather and attach updated debug information to this
report:

apport-collect -p linux replace-with-bug-number


** Tags removed: needs-full-computer-model
** Tags added: bio-outdated-f.37

** Summary changed:

- RTL8192se kernel driver unstable in low power mode
+ [Compaq Presario CQ62-227TU] RTL8192se kernel driver unstable in low power 
mode

** Summary changed:

- [Compaq Presario CQ62-227TU] RTL8192se kernel driver unstable in low power 
mode
+ 10ec:8171 [Compaq Presario CQ62-227TU] RTL8192se kernel driver unstable in 
low power mode

** Tags added: precise

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1155443

Title:
  10ec:8171 [Compaq Presario CQ62-227TU] RTL8192se kernel driver
  unstable in low power mode

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Behaviour noticed immediately after kernel upgrade from 3.0.0-31 to
  32.

  When laptop is connected to power, all is as it should be.

  When laptop is disconnected from mains, and running on battery, the
  wireless will continue working for a while (less than a minute),  then
  drop out and Network Manager will attempt to reconnect to the WLAN. It
  will fail (timing out) forever until Network manager gives up.

  No indication or cause of failure is given in any logs, or in dmesg.

  When the module has failed, then running sudo rmmod rtl8192se rtlwifi
  mac80211 cfg80211  sudo modprobe rtl8192se in a terminal will re-
  enable wireless, but it will inevitably drop out again just as it did
  before. Reconnecting mains power will also restore stability. (That
  is, if the wireless has failed, reattaching mains power will not of
  itself restore it, but if the kernel module is rmmod/modprobe-d back
  in, it will remain working correctly, and not drop out again so long
  as it is on mains power.)

  I have since checked under 3.0.0.31 again, and this problem does not
  occur.

  It looks like the rtl8192se module is unstable when the Power
  Management settings are on battery mode in this kernel version.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: linux-image-3.0.0-32-generic-pae 3.0.0-32.50
  ProcVersionSignature: Ubuntu 3.0.0-32.50-generic-pae 3.0.65
  Uname: Linux 3.0.0-32-generic-pae i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 1.23-0ubuntu4.1
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC270 Analog [ALC270 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  staples1867 F xfce4-volumed
staples1899 f xfce4-mixer-plu
staples1909 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xd450 irq 45'
 Mixer name : 'Intel Cantiga HDMI'
 Components : 'HDA:10ec0270,103c1484,00100100 
HDA:80862802,80860101,0010'
 Controls  : 20
 Simple ctrls  : 11
  Date: Fri Mar 15 15:47:41 2013
  HibernationDevice: RESUME=UUID=11661010-43bb-4686-b55f-775986dab970
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release i386 (20101007)
  MachineType: Hewlett-Packard Presario CQ62 Notebook PC
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_AU.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-32-generic-pae 
root=UUID=8e115c9a-6781-4a65-b122-f3406384055c ro splash
  RelatedPackageVersions:
   linux-restricted-modules-3.0.0-32-generic-pae N/A
   linux-backports-modules-3.0.0-32-generic-pae  N/A
   linux-firmware1.60.1
  SourcePackage: linux
  UpgradeStatus: Upgraded to oneiric on 2012-06-04 (284 days ago)
  dmi.bios.date: 04/26/2010
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.15
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 1484
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 77.18
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.15:bd04/26/2010:svnHewlett-Packard:pnPresarioCQ62NotebookPC:pvr049B112028102:rvnHewlett-Packard:rn1484:rvr77.18:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: Presario CQ62 Notebook PC
  dmi.product.version: 049B112028102
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1155443/+subscriptions

-- 
Mailing list:

[Kernel-packages] [Bug 575915] Re: suspend enables touchpad

John Kuhns, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/575915/comments/5
regarding this being fixed with an update. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/575915

Title:
  suspend enables touchpad

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  I disabled my touchpad using KDE's system settings. But when I
  suspend/resume, the touchpad is re-enabled. (Interestingly, the
  setting does seem to stick through a reboot - just not a resume.)

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-22-generic 2.6.32-22.33
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-22-generic x86_64
  NonfreeKernelModules: wl
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  kuhns  1510 F kmix
   /dev/snd/controlC0:  kuhns  1466 F knotify4
kuhns  1510 F kmix
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfc50 irq 22'
 Mixer name : 'IDT 92HD73C1X5'
 Components : 'HDA:111d7675,102802a0,00100103'
 Controls  : 17
 Simple ctrls  : 11
  Card1.Amixer.info:
   Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfc01 irq 17'
 Mixer name : 'ATI R6xx HDMI'
 Components : 'HDA:1002aa01,00aa0100,0010'
 Controls  : 4
 Simple ctrls  : 1
  Card1.Amixer.values:
   Simple mixer control 'IEC958',0
 Capabilities: pswitch pswitch-joined penum
 Playback channels: Mono
 Mono: Playback [off]
  Date: Wed May  5 13:35:09 2010
  HibernationDevice: RESUME=UUID=adc7b984-5a6c-4102-bb6a-1d02feb93eb0
  HotplugNewDevices:
   
  HotplugNewMounts:
   
  MachineType: Dell Inc. Studio 1737
  ProcCmdLine: root=UUID=80170d69-66ff-42b0-8f84-fbdf59af519a ro quiet splash
  ProcEnviron:
   LANGUAGE=
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.34
  RfKill:
   
  SourcePackage: linux
  Symptom: storage
  UdevMonitorLog:
   monitor will print the received events for:
   UDEV - the event which udev sends out after rule processing
  UdisksMonitorLog: Monitoring activity from the disks daemon. Press Ctrl+C to 
cancel.
  WpaSupplicantLog:
   
  dmi.bios.date: 02/11/2009
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A05
  dmi.board.name: 0P786H
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A05
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: A05
  dmi.modalias: 
dmi:bvnDellInc.:bvrA05:bd02/11/2009:svnDellInc.:pnStudio1737:pvrA05:rvnDellInc.:rn0P786H:rvrA05:cvnDellInc.:ct8:cvrA05:
  dmi.product.name: Studio 1737
  dmi.product.version: A05
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/575915/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1195811] [NEW] nouveau: Abnormally high FPS (no vsync) on natively mir testing demo-clients.

You have been subscribed to a public bug:

I installed Ubuntu 13.10 (yesterday)  in order to test Xmir and Mir natively 
(examples-clients). Xmirg worked flawlessly. The only problem was the 
duplicate mouse cursor(s).
But I noticed an abnormally high FPS in some clients demo when I tested Mir 
natively per these instructions
http://unity.ubuntu.com/mir/using_mir_on_pc.html

I recorded the test case using external camera.  Apologies for the quality but 
you will see the values.
http://www.youtube.com/watch?v=zil-lRNlaks

I attached an apport.log just for more info if are needed.

I'm not a technical guy and I filled this report prompted by @duflu in IRC 
#ubuntu-mir
You can read the mini conversation here.
http://irclogs.ubuntu.com/2013/06/28/%23ubuntu-mir.html

This test had the same results either if X only was running in VT7 (Video)  or 
Xmir.
I hope I helped... in something.

Regards
 NikTh

** Affects: mir
 Importance: Critical
 Status: Triaged

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: nouveau
-- 
nouveau: Abnormally high FPS (no vsync) on natively mir testing demo-clients.
https://bugs.launchpad.net/bugs/1195811
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1210859] Re: kernel panic when restarting containers

** Tags removed: regression-potential
** Tags added: regression-updated

** Tags removed: regression-updated
** Tags added: regression-update

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1210859

Title:
  kernel panic when restarting containers

Status in “linux” package in Ubuntu:
  Incomplete
Status in “lxc” package in Ubuntu:
  Invalid

Bug description:
  With 3.8.0-28-generic stopping a container (at least if there under a
  minute or so it was started) will crash the kernel.

  To repeat
  Make sure you have that kernel (release kernel works fine) - its in the 
raring-proposed.
  Create a container (with ubuntu template)
  Start it
  Stop it 

  Sometimes it will stop the container, but the kernel will crash if you start 
the container again.
  --- 
  Architecture: amd64
  DistroRelease: Ubuntu 13.04
  MarkForUpload: True
  Package: lxc 0.9.0-0ubuntu3.4
  PackageArchitecture: amd64
  ProcEnviron:
   LANGUAGE=en_US:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  Uname: Linux 3.8.0-28-generic x86_64
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  --- 
  AlsaDevices:
   total 0
   crw-rw---T 1 root audio 116,  1 Aug 11 23:37 seq
   crw-rw---T 1 root audio 116, 33 Aug 11 23:37 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDmesg: [2.237712] input: ImExPS/2 Generic Explorer Mouse as 
/devices/platform/i8042/serio1/input/input2
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=099cd2e0-728c-4398-ae38-04bdd8d6a402
  IwConfig:
   br0   no wireless extensions.
   
   eth0  no wireless extensions.
   
   lono wireless extensions.
  Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Bochs Bochs
  MarkForUpload: True
  Package: linux (not installed)
  PciMultimedia:
   
  ProcEnviron:
   LANGUAGE=en_US:en
   TERM=screen
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 cirrusdrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-28-generic 
root=UUID=563a33ab-fdcc-48b9-a0b9-05d1ce4c2c1f ro quiet
  ProcVersionSignature: Ubuntu 3.8.0-28.41-generic 3.8.13.5
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-28-generic N/A
   linux-backports-modules-3.8.0-28-generic  N/A
   linux-firmware1.106
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  raring
  Uname: Linux 3.8.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 01/01/2011
  dmi.bios.vendor: Bochs
  dmi.bios.version: Bochs
  dmi.chassis.type: 1
  dmi.chassis.vendor: Bochs
  dmi.modalias: 
dmi:bvnBochs:bvrBochs:bd01/01/2011:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr:
  dmi.product.name: Bochs
  dmi.sys.vendor: Bochs

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1210859/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1093237] Re: [Dell Inspiron Inspiron 17R SE 7720] TouchPad detected as Generic Mouse

Jason, it would be best if you sent an e-mail to the linux-input
mailinglist in the preferred upstream format.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1093237

Title:
  [Dell Inspiron Inspiron 17R SE 7720] TouchPad detected as Generic
  Mouse

Status in The Linux Kernel:
  Unknown
Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Laptop is a Dell Inspiron 17R SE.
  Ubuntu 12.10 Desktop x64
  The touchpad is detected a Generic Mouse.

  ⎡ Virtual core pointerid=2[master pointer  (3)]
  ⎜   ↳ Virtual core XTEST pointer  id=4[slave  pointer 
 (2)]
  ⎜   ↳ PS/2 Generic Mouse  id=13   [slave  pointer 
 (2)]
  ⎣ Virtual core keyboard   id=3[master keyboard (2)]
  ↳ Virtual core XTEST keyboard id=5[slave  
keyboard (3)]
  ↳ Power Buttonid=6[slave  
keyboard (3)]
  ↳ Video Bus   id=7[slave  
keyboard (3)]
  ↳ Video Bus   id=8[slave  
keyboard (3)]
  ↳ Power Buttonid=9[slave  
keyboard (3)]
  ↳ Sleep Buttonid=10   [slave  
keyboard (3)]
  ↳ Integrated Webcam   id=11   [slave  
keyboard (3)]
  ↳ AT Translated Set 2 keyboardid=12   [slave  
keyboard (3)]
  ↳ Dell WMI hotkeysid=14   [slave  
keyboard (3)]

  I: Bus=0011 Vendor=0002 Product=0001 Version=
  N: Name=PS/2 Generic Mouse
  P: Phys=isa0060/serio1/input0
  S: Sysfs=/devices/platform/i8042/serio1/input/input7
  U: Uniq=
  H: Handlers=mouse0 event7
  B: PROP=0
  B: EV=7
  B: KEY=7 0 0 0 0
  B: REL=3

  [20.643] (II) config/udev: Adding input device PS/2 Generic Mouse 
(/dev/input/event7)
  [20.643] (**) PS/2 Generic Mouse: Applying InputClass evdev pointer 
catchall
  [20.643] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
  [20.643] (**) PS/2 Generic Mouse: always reports core events
  [20.643] (**) evdev: PS/2 Generic Mouse: Device: /dev/input/event7
  [20.643] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
  [20.643] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
  [20.643] (--) evdev: PS/2 Generic Mouse: Found relative axes
  [20.643] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
  [20.643] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
  [20.643] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
  [20.643] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
  [20.643] (**) Option config_info 
udev:/sys/devices/platform/i8042/serio1/input/input7/event7
  [20.643] (II) XINPUT: Adding extended input device PS/2 Generic Mouse 
(type: MOUSE, id 13)
  [20.643] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
  [20.643] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
  [20.643] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
  [20.643] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
  [20.643] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
  [20.643] (II) config/udev: Adding input device PS/2 Generic Mouse 
(/dev/input/mouse0)
  [20.643] (II) No input driver specified, ignoring this device.
  [20.643] (II) This device may have been added with another device file.
  ---
  ApportVersion: 2.6.1-0ubuntu9
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  jason  2244 F pulseaudio
  DistroRelease: Ubuntu 12.10
  HibernationDevice: RESUME=UUID=9c6a3506-b1a5-4429-92ef-d044e5c28fbf
  InstallationDate: Installed on 2012-12-23 (4 days ago)
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  MachineType: Dell Inc. Inspiron 7720
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB:
   0 inteldrmfb
   1 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-21-generic 
root=UUID=afcbece8-ad61-4649-983b-1e1e547e1e80 ro quiet splash
  ProcVersionSignature: Ubuntu 3.5.0-21.32-generic 3.5.7.1
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-21-generic N/A
   linux-backports-modules-3.5.0-21-generic  N/A
   linux-firmware1.95
  StagingDrivers: rts5139
  Tags:  quantal running-unity staging
  Uname: Linux 3.5.0-21-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  dmi.bios.date: 10/24/2012
  dmi.bios.vendor:

[Kernel-packages] [Bug 557890] Re: transfer lockup connecting to a NetApp/CIFS share

Kristian Rink, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/557890/comments/13
regarding you don't use the device anymore. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Invalid

** Changed in: linux
   Status: New = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/557890

Title:
  transfer lockup connecting to a NetApp/CIFS share

Status in The Linux Kernel:
  Invalid
Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  Binary package hint: samba

  Mounting a CIFS share off an IBM N3300 filer (== NetApp FAS 2020), I
  experienced some file managers, applications, ... to more or less
  regularly lock up / don't do anything while trying to browse folders.
  Looking more into this, it seems the problem is more basic. The thing
  is mounted using cifs:

  //192.168.1.252/data on /opt/filer type cifs (rw,mand)

  Looking at dmesg, these errors do appear more or less frequently when
  trying to read off the filer:

  [ 3757.049058]  CIFS VFS: No response for cmd 50 mid 11642
  [ 3763.068762]  CIFS VFS: Bad protocol string signature header 4
  [ 3763.068788]  CIFS VFS: bad smb detected. The Mid=11646
  [ 3763.068794] Bad SMB: : dump of 48 bytes of data at 0xf46e8000
  [ 3763.068825]  0040 0004 0032 80018800 @ . . . . . . . 2 . . . . 
. . .
  [ 3763.068855]     1e680040 . . . . . . . . . . . . @ 
. h .
  [ 3763.068885]  2d7e0800 0400020a 0200 3800 . . ~ - . . . . . . . . . 
8 . .
  [ 3778.069085]  CIFS VFS: No response for cmd 50 mid 11646
  [ 3784.087139]  CIFS VFS: Bad protocol string signature header 4
  [ 3784.087161]  CIFS VFS: bad smb detected. The Mid=11650
  [ 3784.087165] Bad SMB: : dump of 48 bytes of data at 0xf46e9500
  [ 3784.087171]  0040 0004 0032 80018800 @ . . . . . . . 2 . . . . 
. . .
  [ 3784.087195]     1e680040 . . . . . . . . . . . . @ 
. h .
  [ 3784.087202]  2d820800 0400020a 0200 3800 . . . - . . . . . . . . . 
8 . .
  [ 3799.084053]  CIFS VFS: No response for cmd 50 mid 11650
  [ 3805.102848]  CIFS VFS: Bad protocol string signature header 4
  [ 3805.102852]  CIFS VFS: bad smb detected. The Mid=11654
  [ 3805.102873] Bad SMB: : dump of 48 bytes of data at 0xf46e8540
  [ 3805.102879]  0040 0004 0032 80018800 @ . . . . . . . 2 . . . . 
. . .
  [ 3805.102903]     1e680040 . . . . . . . . . . . . @ 
. h .
  [ 3805.102909]  2d860800 0400020a 0200 3800 . . . - . . . . . . . . . 
8 . .
  [ 3820.100062]  CIFS VFS: No response for cmd 50 mid 11654
  [ 3826.119095]  CIFS VFS: Bad protocol string signature header 4
  [ 3826.119100]  CIFS VFS: bad smb detected. The Mid=11658
  [ 3826.119120] Bad SMB: : dump of 48 bytes of data at 0xf46e8fc0
  [ 3826.119127]  0040 0004 0032 80018800 @ . . . . . . . 2 . . . . 
. . .
  [ 3826.119151]     1e680040 . . . . . . . . . . . . @ 
. h .
  [ 3826.119157]  2d8a0800 0400020a 0200 3800 . . . - . . . . . . . . . 
8 . .

  
  It happens once in a while copying things off the filer using the shell, and 
it happens almost reliably when browsing to the share using any visual file 
manager.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: smbfs 2:3.4.7~dfsg-1ubuntu2
  ProcVersionSignature: Ubuntu 2.6.32-19.28-generic-pae 2.6.32.10+drm33.1
  Uname: Linux 2.6.32-19-generic-pae i686
  Architecture: i386
  CIFSMounts: Error: command ['mount', '|', 'grep', 'cifs'] failed with exit 
code 1: mount: only root can do that
  Date: Thu Apr  8 09:09:58 2010
  InstallationMedia: Xubuntu 10.04 Lucid Lynx - Alpha i386 (20100224.1)
  ProcEnviron:
   PATH=(custom, user)
   LANG=de_DE.utf8
   SHELL=/bin/bash
  SambaClientRegression: No
  SourcePackage: samba

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/557890/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1195811] Re: nouveau: Abnormally high FPS (no vsync) on natively mir testing demo-clients.

2013-08-14 Thread Daniel van Vugt

** Package changed: mesa (Ubuntu) = linux (Ubuntu)

** Changed in: linux (Ubuntu)
 Assignee: (unassigned) = Maarten Lankhorst (mlankhorst)

** Changed in: linux (Ubuntu)
   Status: New = In Progress

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1195811

Title:
  nouveau: Abnormally high FPS (no vsync) on natively mir testing demo-
  clients.

Status in Mir:
  Triaged
Status in “linux” package in Ubuntu:
  In Progress

Bug description:
  I installed Ubuntu 13.10 (yesterday)  in order to test Xmir and Mir natively 
(examples-clients). Xmirg worked flawlessly. The only problem was the 
duplicate mouse cursor(s).
  But I noticed an abnormally high FPS in some clients demo when I tested Mir 
natively per these instructions
  http://unity.ubuntu.com/mir/using_mir_on_pc.html

  I recorded the test case using external camera.  Apologies for the quality 
but you will see the values.
  http://www.youtube.com/watch?v=zil-lRNlaks

  I attached an apport.log just for more info if are needed.

  I'm not a technical guy and I filled this report prompted by @duflu in IRC 
#ubuntu-mir
  You can read the mini conversation here.
  http://irclogs.ubuntu.com/2013/06/28/%23ubuntu-mir.html

  This test had the same results either if X only was running in VT7 (Video)  
or Xmir.
  I hope I helped... in something.

  Regards
   NikTh

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1195811/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1195811] Re: nouveau: Abnormally high FPS (no vsync) on natively mir testing demo-clients.

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1195811

Title:
  nouveau: Abnormally high FPS (no vsync) on natively mir testing demo-
  clients.

Status in Mir:
  Triaged
Status in “linux” package in Ubuntu:
  In Progress

Bug description:
  I installed Ubuntu 13.10 (yesterday)  in order to test Xmir and Mir natively 
(examples-clients). Xmirg worked flawlessly. The only problem was the 
duplicate mouse cursor(s).
  But I noticed an abnormally high FPS in some clients demo when I tested Mir 
natively per these instructions
  http://unity.ubuntu.com/mir/using_mir_on_pc.html

  I recorded the test case using external camera.  Apologies for the quality 
but you will see the values.
  http://www.youtube.com/watch?v=zil-lRNlaks

  I attached an apport.log just for more info if are needed.

  I'm not a technical guy and I filled this report prompted by @duflu in IRC 
#ubuntu-mir
  You can read the mini conversation here.
  http://irclogs.ubuntu.com/2013/06/28/%23ubuntu-mir.html

  This test had the same results either if X only was running in VT7 (Video)  
or Xmir.
  I hope I helped... in something.

  Regards
   NikTh

To manage notifications about this bug go to:
https://bugs.launchpad.net/mir/+bug/1195811/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1087981] Re: 046d:c50e LX5 cordless optical logitech mouse wrongly identified as MX1000 laser mouse

dino99, did this problem not occur for you in a release prior to
Precise?

** Tags added: precise

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1087981

Title:
  046d:c50e LX5 cordless optical logitech mouse wrongly identified as
  MX1000 laser mouse

Status in xserver-xorg-input-evdev:
  New
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  oem@oem-desktop:~$ logitech_applet
  003/002 046D/C50E M-RAG97 MX1000 Laser Mouse
 Channel 2Battery: 5Single channel   No 800cpi support   No Horiz 
Roller   No Vert Roller   2 butt.

  oem@oem-desktop:~$ dmesg | grep mouse
  [0.761534] mousedev: PS/2 mouse device common for all mice

  oem@oem-desktop:~$ dmesg | grep usb
  [0.153470] ACPI: bus type usb registered
  [0.153470] usbcore: registered new interface driver usbfs
  [0.153470] usbcore: registered new interface driver hub
  [0.153470] usbcore: registered new device driver usb
  [0.760041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  [0.760043] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
  [0.760046] usb usb1: Product: EHCI Host Controller
  [0.760048] usb usb1: Manufacturer: Linux 3.7.0-5-generic ehci_hcd
  [0.760050] usb usb1: SerialNumber: :00:1d.7
  [0.760348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  [0.760350] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
  [0.760352] usb usb2: Product: UHCI Host Controller
  [0.760354] usb usb2: Manufacturer: Linux 3.7.0-5-generic uhci_hcd
  [0.760357] usb usb2: SerialNumber: :00:1d.0
  [0.760585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  [0.760588] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
  [0.760590] usb usb3: Product: UHCI Host Controller
  [0.760592] usb usb3: Manufacturer: Linux 3.7.0-5-generic uhci_hcd
  [0.760595] usb usb3: SerialNumber: :00:1d.1
  [1.256015] usb 3-1: new low-speed USB device number 2 using uhci_hcd
  [1.430589] usb 3-1: New USB device found, idVendor=046d, idProduct=c50e
  [1.430592] usb 3-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
  [1.430594] usb 3-1: Product: USB RECEIVER
  [1.430597] usb 3-1: Manufacturer: Logitech
  [1.540191] usbcore: registered new interface driver usbhid
  [1.540193] usbhid: USB HID core driver
  [1.572331] input: Logitech USB RECEIVER as 
/devices/pci:00/:00:1d.1/usb3/3-1/3-1:1.0/input/input3
  [1.572882] hid-generic 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 
Mouse [Logitech USB RECEIVER] on usb-:00:1d.1-1/input0

  Related report:
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1006145

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.7.0-5-generic 3.7.0-5.13
  ProcVersionSignature: Ubuntu 3.7.0-5.13-generic 3.7.0-rc8
  Uname: Linux 3.7.0-5-generic i686
  ApportVersion: 2.6.3-0ubuntu4
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  oem3259 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Date: Sat Dec  8 14:29:36 2012
  HibernationDevice: RESUME=UUID=0a9ca7f0-6eeb-4b21-b70f-670fa600de16
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
   
   eth1  no wireless extensions.
  Lsusb:
   Bus 003 Device 002: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: ASUSTEK COMPUTER INC P5W DH Deluxe
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-5-generic 
root=UUID=9e61e83e-bca9-43cf-aa90-5a68892213fa ro 
crashkernel=384M-2G:64M,2G-:128M quiet
  RelatedPackageVersions:
   linux-restricted-modules-3.7.0-5-generic N/A
   linux-backports-modules-3.7.0-5-generic  N/A
   linux-firmware   1.98
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  WpaSupplicantLog:
   
  dmi.bios.date: 07/22/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 3002
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5W DH Deluxe
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias:

[Kernel-packages] [Bug 1028137] Re: hid-generic 0003:046D:C315.001E: can't reset device, status -71

Angel Guzman Maeso, could you please confirm this issue exists with the
latest development release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ . If the issue remains,
could you please run the following command in the development release
from a Terminal (Applications-Accessories-Terminal), as it will
automatically gather and attach updated debug information to this
report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.


** Tags removed: bios-outdated-1.15
** Tags added: latest-bios-1.15

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1028137

Title:
  hid-generic 0003:046D:C315.001E: can't reset device, status -71

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I don't know if it is the right package for report but anyways.

  I have a keyboard and mouse connected to a base plattaform for laptops
  with a fan and a usb hub (4 spaces) (it helps to avoid hot restarts by
  heat on summer and get more usb spaces for plug gadgets).

  $ lsusb
  Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
  Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 036: ID 0a05:7220
  Bus 001 Device 008: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
  Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader
  Bus 002 Device 004: ID 064e:a219 Suyin Corp. 1.3M WebCam (notebook emachines 
E730, Acer sub-brand)
  Bus 001 Device 038: ID 046d:c045 Logitech, Inc. Optical Mouse
  Bus 001 Device 037: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard

  If I plug/unplug the only difference line is for 0a05:7220:

  $ lsusb -D 0a05:7220
  Cannot open 0a05:7220

  When I plug/unplug the base always show the same on dmesg:

  [1003500.857258] hid-generic 0003:046D:C045.001D: can't reset device, 
:00:1d.0-1.1.1/input0, status -71
  [1003500.858251] hid-generic 0003:046D:C315.001E: can't reset device, 
:00:1d.0-1.1.4/input0, status -71
  [1003500.861183] usb 2-1.1: clear tt 1 (0160) error -71
  [1003500.865210] hid-generic 0003:046D:C045.001D: can't reset device, 
:00:1d.0-1.1.1/input0, status -71
  [1003500.865301] usb 2-1.1: clear tt 1 (0170) error -71
  [1003500.869430] usb 2-1.1: clear tt 1 (0160) error -71
  [1003500.873579] hid-generic 0003:046D:C315.001E: can't reset device, 
:00:1d.0-1.1.4/input0, status -71
  [1003500.877580] usb 2-1.1: clear tt 1 (0170) error -71
  [1003500.880567] hid-generic 0003:046D:C045.001D: can't reset device, 
:00:1d.0-1.1.1/input0, status -71
  [1003500.881931] hid-generic 0003:046D:C315.001E: can't reset device, 
:00:1d.0-1.1.4/input0, status -71
  [1003500.884565] usb 2-1.1: clear tt 1 (0160) error -71
  [1003500.888711] usb 2-1.1: clear tt 1 (0170) error -71
  [1003500.888963] hid-generic 0003:046D:C045.001D: can't reset device, 
:00:1d.0-1.1.1/input0, status -71
  [1003500.892914] usb 2-1.1: clear tt 1 (0160) error -71
  [1003500.896927] hid-generic 0003:046D:C045.001D: can't reset device, 
:00:1d.0-1.1.1/input0, status -71
  [1003500.897546] hid-generic 0003:046D:C315.001E: can't reset device, 
:00:1d.0-1.1.4/input0, status -71
  [1003500.900893] usb 2-1.1: clear tt 1 (0160) error -71
  [1003500.905018] usb 2-1.1: clear tt 1 (0170) error -71
  [1003500.912665] hid-generic

[Kernel-packages] [Bug 644776] Re: update of kernel 2.6.35-22 failed

jerrylamos, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

** Tags added: bios-outdated-3.23

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/644776

Title:
  update of kernel 2.6.35-22 failed

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Installed daily build 20100920 then did update on date 22 Sept.
  Update says kernel 2.6.35-22 failed to update.  I don't know where the
  log is that keeps the exact words of the stuff that flashes on the
  screen.

  Help, anyone, on knowing how to see the messages that flash by?

  Jerry

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.33
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  jerry  1334 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981B at irq 11'
 Mixer name : 'Analog Devices AD1981B'
 Components : 'AC97a:41445374'
 Controls  : 26
 Simple ctrls  : 18
  Card29.Amixer.info:
   Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 
1RHT71WW-3.04'
 Mixer name : 'ThinkPad EC 1RHT71WW-3.04'
 Components : ''
 Controls  : 2
 Simple ctrls  : 1
  Card29.Amixer.values:
   Simple mixer control 'Console',0
 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
 Playback channels: Mono
 Limits: Playback 0 - 14
 Mono: Playback 14 [100%] [off]
  Date: Tue Sep 21 18:24:44 2010
  HibernationDevice: RESUME=/dev/sda8
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Alpha i386 (20100920)
  MachineType: IBM 23736U0
  PccardctlIdent:
   Socket 0:
 no product info available
   Socket 1:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
   Socket 1:
 no card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic 
root=UUID=c1a1b5f3-4753-4294-bf7b-30b8f6370442 ro quiet splash
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  RfKill:
   
  SourcePackage: linux
  dmi.bios.date: 10/13/2005
  dmi.bios.vendor: IBM
  dmi.bios.version: 1RETDNWW (3.19 )
  dmi.board.name: 23736U0
  dmi.board.vendor: IBM
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: IBM
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnIBM:bvr1RETDNWW(3.19):bd10/13/2005:svnIBM:pn23736U0:pvrThinkPadT40:rvnIBM:rn23736U0:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable:
  dmi.product.name: 23736U0
  dmi.product.version: ThinkPad T40
  dmi.sys.vendor: IBM

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/644776/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 633983] Re: Can't boot amd64 live cd on Mac (EFI)

Kalman Reti, could you please confirm this issue exists with the latest
development release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ .

** Attachment removed: IMG_20110622_232607.jpg
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/633983/+attachment/2178682/+files/IMG_20110622_232607.jpg

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/633983

Title:
  Can't boot amd64 live cd on Mac (EFI)

Status in The Linux Kernel:
  Unknown
Status in Release Notes for Ubuntu:
  Fix Released
Status in “casper” package in Ubuntu:
  Invalid
Status in “linux” package in Ubuntu:
  Incomplete
Status in “syslinux” package in Ubuntu:
  Confirmed
Status in “casper” source package in Maverick:
  Invalid
Status in “linux” source package in Maverick:
  Invalid
Status in “syslinux” source package in Maverick:
  Invalid

Bug description:
  Previous release livecd's were bootable by holding down option while
  the cd was in the drive and selecting the Windows cd.

  Trying this with the Meerkat beta desktop livecd image (md5sum verified) I 
just get two numbers (1. and 2.) which look like
  they should be labeling some text but there is no text visible and the 
message to select CD-ROM boot type.  Typing either a 1 or a 2 doesn't do 
anything.

  Googling revealed that some Windows beta iso images had the same problem 
booting on Macs; apparently in this case it was an issue that the Windows 
version had EFI support (and so didn't use the BIOS fallback) but was assuming 
a newer version of EFI.
  There were some other posts which claimed that it was that the iso image was 
generated incorrectly (something having to do with ISO9660 versions).

  Unfortunately, even though I develop software for a living, there is
  nothing I can do to help debug this (except try newer versions) since
  once I get to that message, everything seems unresponsive.

  The upshot is that a useful thing which I did frequently in older
  versions (i.e. boot the 64bit desktop livecd on this macbook) no
  longer works.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/633983/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 630219] Re: Repeated prompt for disk unlocking passphrase

Harmut Kabus, this bug was reported a while ago and there hasn't been
any activity in it recently. We were wondering if this is still an
issue? If so, could you please test for this with the latest development
release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.


** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/630219

Title:
  Repeated prompt for disk unlocking passphrase

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  on non-splash boot the prompt Unlocking the disk /dev/disk/. to
  enter the passphrase is resubmitted on each keypress of the
  passphrase.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image (not installed)
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5
  Uname: Linux 2.6.32-24-generic i686
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  hk 1627 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'CMI8738'/'C-Media CMI8738 (model 55) at 0x9400, irq 17'
 Mixer name : 'CMedia PCI'
 Components : ''
 Controls  : 41
 Simple ctrls  : 22
  Date: Sat Sep  4 13:41:50 2010
  HibernationDevice: RESUME=UUID=11dbb9fe-f438-4073-90ca-8b2cf5b7babe
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  MachineType: System Manufacturer System Name
  ProcCmdLine: root=/dev/mapper/LMVGrp-ROOT ro quiet
  ProcEnviron:
   LANGUAGE=de_DE:de:en_GB:en
   LANG=de_DE.utf8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.34.1
  RfKill:
   
  SourcePackage: linux
  dmi.bios.date: 02/12/2003
  dmi.bios.vendor: Award Software, Inc.
  dmi.bios.version: ASUS P4S533-E ACPI BIOS Revision 1008 Beta 002
  dmi.board.name: P4S533-E
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: REV 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 7
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAwardSoftware,Inc.:bvrASUSP4S533-EACPIBIOSRevision1008Beta002:bd02/12/2003:svnSystemManufacturer:pnSystemName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP4S533-E:rvrREV1.xx:cvnChassisManufacture:ct7:cvrChassisVersion:
  dmi.product.name: System Name
  dmi.product.version: System Version
  dmi.sys.vendor: System Manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/630219/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 632278] Re: Ubuntu 10.04 tabs charactes disappeared when copy/paste to terminal

** Package changed: linux (Ubuntu) = ubuntu

** Changed in: ubuntu
   Status: Confirmed = New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/632278

Title:
  Ubuntu 10.04 tabs charactes disappeared when copy/paste to terminal

Status in Ubuntu:
  New

Bug description:
  1. open gedit.
  2. check if Insert spaces instead of tabs unchecked
  3. type: lsTAB-all
   note: no space chars, just tab.
  4. select line, copy to buffer.
  5. open terminal, paste from buffer, you will  get ls-all
 while lsspace|Tab-all  is expected.

  This is really borrowing, when deal with source code...

  
  Linux a2-asrock 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 
2010 i686 GNU/Linux

  Ubuntu 2.6.32-24.39-generic-pae 2.6.32.15+drm33.5

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/632278/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 648352] Re: Cannot boot after update to Maverick

Bremm, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .


** Tags added: bios-outdated-1805 regression-release

** Changed in: linux (Ubuntu)
   Status: Confirmed = New

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/648352

Title:
  Cannot boot after update to Maverick

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  After updating to Maverick from Lucid, the kernel (linux-
  image-2.6.35-22-generic) seems to be unable to boot. The old one
  (linux-image-2.6.32-24-generic) boots flawlessy. I have both at this
  moment on grub2.

  Steps to reproduce this error:

  Install Lucid with /dev/sda1 as reiserfs;
  Upgrade to Maverick;
  Boot with 2.6.35-22-generic.

  After reboot you'll get the messge Kernel Panic: VFS: Unable to mount
  root.

  Also I've got a (poor) picture with my cellphone camera (if needed,
  please ask a copy).

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.33
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5
  Uname: Linux 2.6.32-24-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bremm  2111 F xfce4-mixer-plu
bremm  2139 F xfce4-volumed
  CRDA: Error: [Errno 2] Arquivo ou diretório não encontrado
  Card0.Amixer.info:
   Card hw:0 'CK804'/'NVidia CK804 with ALC850 at irq 23'
 Mixer name : 'Realtek ALC850 rev 0'
 Components : 'AC97a:414c4790'
 Controls  : 42
 Simple ctrls  : 27
  Card1.Amixer.info:
   Card hw:1 'UART'/'MPU-401 UART at 0x330, irq 10'
 Mixer name : ''
 Components : ''
 Controls  : 0
 Simple ctrls  : 0
  Card1.Amixer.values:
   
  Date: Sun Sep 26 16:48:31 2010
  HibernationDevice: RESUME=UUID=18e70129-30d5-4a1a-8892-caf6ad91e5ad
  IwConfig:
   lono wireless extensions.
   
   eth1  no wireless extensions.
   
   eth0  no wireless extensions.
  Lsusb:
   Bus 002 Device 004: ID 1c4f:0002 SiGma Micro 
   Bus 002 Device 003: ID 04d9:2083 Holtek Semiconductor, Inc. 
   Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible 
Power Supply
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: System manufacturer System Product Name
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic 
root=UUID=b951da7b-04b7-4406-a5de-7b9f92466a71 ro quiet splash
  ProcEnviron:
   LANGUAGE=pt_BR:pt:pt_PT:en
   PATH=(custom, no user)
   LANG=pt_BR.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  RfKill:
   
  SourcePackage: linux
  dmi.bios.date: 12/01/2005
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: ASUS A8N-SLI DELUXE ACPI BIOS Revision 1016
  dmi.board.name: A8N-SLI DELUXE
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: 1.XX
  dmi.chassis.asset.tag: 123456789000
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvrASUSA8N-SLIDELUXEACPIBIOSRevision1016:bd12/01/2005:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnA8N-SLIDELUXE:rvr1.XX:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/648352/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 652812] Re: task blocked for more than 120 seconds on server kernel

Lars, this bug was reported a while ago and there hasn't been any activity in 
it recently. We were wondering if this is still an issue? If so, could you 
please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: latest-bios-1.0b regression-potential

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/652812

Title:
  task blocked for more than 120 seconds on server kernel

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Hi,

  this is about a ubuntu server version.
  The server consists mainly of fast HDDs and 2 external attached LTO-3 tape 
drives in a changer.
  It's purpose is to sync with other servers and then write ewverything onto 
both tape drives in parallel overnight.

  The following is our main problem:
  [ 1081.590063] INFO: task mbuffer1:2589 blocked for more than 120 seconds.
  [ 1081.590577] echo 0  /proc/sys/kernel/hung_task_timeout_secs disables 
this message.
  [ 1081.591151] mbuffer1  D  0  2589   2560 0x
  [ 1081.591162]  88080cee9c18 0082 00015bc0 
00015bc0
  [ 1081.591173]  8803f87ac890 88080cee9fd8 00015bc0 
8803f87ac4d0
  [ 1081.591181]  00015bc0 88080cee9fd8 00015bc0 
8803f87ac890
  [ 1081.591189] Call Trace:
  [ 1081.591208]  [815583ad] schedule_timeout+0x22d/0x300
  [ 1081.591220]  [812b4567] ? kobject_put+0x27/0x60
  [ 1081.591228]  [81559f45] ? _spin_lock_irq+0x15/0x20
  [ 1081.591238]  [8138a90a] ? scsi_request_fn+0xda/0x5e0
  [ 1081.591246]  [81557656] wait_for_common+0xd6/0x180
  [ 1081.591256]  [8129de33] ? __generic_unplug_device+0x33/0x40
  [ 1081.591266]  [8105a350] ? default_wake_function+0x0/0x20
  [ 1081.591286]  [a015c4d8] ? T.945+0x158/0x170 [st]
  [ 1081.591294]  [815577bd] wait_for_completion+0x1d/0x20
  [ 1081.591305]  [a015c637] T.944+0x127/0x270 [st]
  [ 1081.591315]  [a0162092] st_write+0x5a2/0xc70 [st]
  [ 1081.591324]  [8105a380] ? wake_up_state+0x10/0x20
  [ 1081.591334]  [81143aa8] vfs_write+0xb8/0x1a0
  [ 1081.591342]  [81144311] sys_write+0x51/0x80
  [ 1081.591351]  [810121b2] system_call_fastpath+0x16/0x1b
  [ 1081.591358] INFO: task mbuffer2:2608 blocked for more than 120 seconds.
  [ 1081.591800] echo 0  /proc/sys/kernel/hung_task_timeout_secs disables 
this message.
  [ 1081.592374] mbuffer2  D  0  2608   2591 0x
  [ 1081.592383]  8800df895c18 0082 00015bc0 
00015bc0
  [ 1081.592392]  8803f87a9ab0 8800df895fd8 00015bc0 
8803f87a96f0
  [ 1081.592400]  00015bc0 8800df895fd8 00015bc0 
8803f87a9ab0
  [ 1081.592408] Call Trace:
  [ 1081.592417]  [815583ad] schedule_timeout+0x22d/0x300
  [ 1081.592425]  [812b4567] ? kobject_put+0x27/0x60
  [ 1081.592432]  [81559f45] ? _spin_lock_irq+0x15/0x20
  [ 1081.592439]  [8138a90a] ? scsi_request_fn+0xda/0x5e0
  [ 1081.592448]  [81557656] wait_for_common+0xd6/0x180
  [ 1081.592456]  [8129de33] ? __generic_unplug_device+0x33/0x40
  [ 1081.592464]  [8105a350] ? default_wake_function+0x0/0x20
  [ 1081.592474]  [a015c4d8] ? T.945+0x158/0x170 [st]
  [ 1081.592482]  [815577bd] wait_for_completion+0x1d/0x20
  [ 1081.592492]  [a015c637] T.944+0x127/0x270 [st]
  [ 1081.592502]  [a0162092]

[Kernel-packages] [Bug 657504] Re: Sound on the headphones doesn't work

Carlos Alfonso Juárez Navarro, this bug was reported a while ago and
there hasn't been any activity in it recently. We were wondering if this
is still an issue? If so, could you please test for this with the latest
development release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: maverick needs-upstream-testing

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/657504

Title:
  Sound on the headphones doesn't work

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  WORKAROUND
  =
  Editing the alsa configuration

  sudo nano /etc/modprobe.d/alsa-base.conf

  and then writing in the last line

  options snd-hda-intel model=eapd probe_mask=1 position_fix=1

  Press (ctrl+O) for save and close (ctrl+X)

  ==

  Hi... I run my computer under Ubuntu 10.04. My computer is a Gateway
  M-6854m. The sound on the speakears is great but the exit of the
  headphones doesn't work. This is the information of my soundcard

  carlos@carlos-laptop  lspci | grep -i audio
  00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller (rev 04)
  01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 
2600 Series]

  carlos@carlos-laptop  cat /proc/asound/modules
  0 snd_hda_intel
  1 snd_hda_intel

  carlos@carlos-laptop  alsamixer
  Sigmatel STAC9205

  If you need more information please contact me.

  ProblemType: BugDistroRelease: Ubuntu 10.04
  Package: evince 2.30.3-0ubuntu1.1
  ProcVersionSignature: Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7
  Uname: Linux 2.6.32-25-generic x86_64
  NonfreeKernelModules: fglrx
  Architecture: amd64
  Date: Sat Oct  9 19:20:01 2010InstallationMedia: Ubuntu 10.04 LTS Lucid 
Lynx - Release amd64 (20100429)
  ProcEnviron:
   LANG=es_MX.utf8
   SHELL=/bin/bashSourcePackage: evince
  ---
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  carlos 1974 F pulseaudio
   /dev/snd/pcmC0D0p:   carlos 1974 F...m pulseaudio
  CRDA: Error: [Errno 2] No existe el archivo o directorio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xf330 irq 47'
     Mixer name : 'SigmaTel STAC9205'
     Components : 'HDA:838476a0,107b0562,00100204 
HDA:14f12c06,14f1,0010'
     Controls  : 13
     Simple ctrls  : 9
  Card1.Amixer.info:
   Card hw:1 'HDMI'/'HDA ATI HDMI at 0xf301 irq 48'
     Mixer name : 'ATI R6xx HDMI'
     Components : 'HDA:1002aa01,00aa0100,0010'
     Controls  : 4
     Simple ctrls  : 1
  Card1.Amixer.values:
   Simple mixer control 'IEC958',0
     Capabilities: pswitch pswitch-joined penum
     Playback channels: Mono
     Mono: Playback [on]DistroRelease: Ubuntu 10.10
  Frequency: Once a day.

[Kernel-packages] [Bug 657034] Re: upgrade to Maverick only partially successfull

Joe, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .

** Tags added: needs-full-computer-model regression-release

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/657034

Title:
  upgrade to Maverick only partially successfull

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  In upgrading to Maverick using update-manager -d, I encountered a
  serious problem. This occurred twice. Towards the end of the
  installation, I receiuved the following warning: Could not install
  'linux-image-2.6.35-22 generic'. The upgrade will continue but the
  'linux-image-2.6.35-22 generic' package may not be in working mode.
  Well, it apprears it ws not. When I rebooted, grub drop into grub-
  rescue mode. I reinstalled Lucid from a backup, and retried the
  upgrade again. The same exact symptoms occurred. After the second
  upgrade failure, I booted from a Live CD and re-insalled grub. This
  seemed to clear the immediate boot problem. On the first upgrade
  attempt, I saved a screen shot of the terminal output. It read:
  Traceback (most recent call last): File
  /usr/share/apport/package.hook, line 59, in module
  pr.write(open(apport.fileutils.make.report_path(pr), 'w')) IOError:
  (Errno 2) No such file or directory:
  '/var/crash/linux.image-2.6.35-22generic.0.crash' . I assume that this
  error was the result of the unsuccessful upgrade to the new kernel.  I
  thought this was worth reporting since it happened twice in a row.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image (not installed)
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  joe2063 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'NVidia'/'HDA NVidia at 0xfe024000 irq 23'
 Mixer name : 'Realtek ALC1200'
 Components : 'HDA:10ec0888,103c2a6c,00100101'
 Controls  : 35
 Simple ctrls  : 20
  Date: Fri Oct  8 14:07:47 2010
  HibernationDevice: RESUME=UUID=fcb2190e-0e07-4612-8d7a-98c63f5b18df
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027)
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  MachineType: HP-Pavilion KJ378AA-ABA a6430f
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic 
root=UUID=c3e66a19-0936-4b3f-aaba-a934d9d7cbd3 ro splash quiet splash
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  RfKill:
   
  SourcePackage: linux
  dmi.bios.date: 04/15/2008
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 5.11
  dmi.board.name: NARRA3
  dmi.board.vendor: ASUSTek Computer INC.
  dmi.board.version: 3.02
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvr5.11:bd04/15/2008:svnHP-Pavilion:pnKJ378AA-ABAa6430f:pvr:rvnASUSTekComputerINC.:rnNARRA3:rvr3.02:cvnHewlett-Packard:ct3:cvrChassisVersion:
  dmi.product.name: KJ378AA-ABA a6430f
  dmi.sys.vendor: HP-Pavilion

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/657034/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 654311] Re: POSTROUTING NAT doesn't operate on ISAKMP traffic

Derek Chen-Becker, could you please test the latest upstream kernel available 
following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow 
additional upstream developers to examine the issue. Please do not test the 
daily folder, but the one all the way at the bottom. Once you've tested the 
upstream kernel, please comment on which kernel version specifically you 
tested. If this bug is fixed in the mainline kernel, please add the following 
tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags removed: networking
** Tags added: latest-bios-f7

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/654311

Title:
  POSTROUTING NAT doesn't operate on ISAKMP traffic

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I have a Juniper firewall (SSG-5) that does ISAKMP with NAT behind my
  linux server. This works with the following iptables rule under
  linux-2.6.32.-24:

  iptables -t nat -A POSTROUTING -s my private network -o eth1 -j SNAT
  --to my public static IP

  Under linux-2.6.32-25, the NAT rule shows up in the listing of
  iptables -t nat -nvL, but it fails to do a source translation. My
  private network, an RFC 1918 non-routable network, simply leaks out my
  public interface (confirmed by a tshark trace) and my ISP simply drops
  the packets.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-25-generic 2.6.32-25.44
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5
  Uname: Linux 2.6.32-24-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  derek  3777 F pulseaudio
   /dev/snd/pcmC0D0p:   derek  3777 F...m pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'SB'/'HDA ATI SB at 0xfe024000 irq 16'
 Mixer name : 'Realtek ALC889A'
 Components : 'HDA:10ec0885,1458a002,00100101'
 Controls  : 43
 Simple ctrls  : 24
  Card1.Amixer.info:
   Card hw:1 'CX8801'/'Conexant CX8801 at 0xf800'
 Mixer name : 'CX88'
 Components : ''
 Controls  : 3
 Simple ctrls  : 2
  Date: Sun Oct  3 17:08:36 2010
  HibernationDevice: RESUME=UUID=23a81355-31a4-4075-9ec9-c69a56975b98
  MachineType: Gigabyte Technology Co., Ltd. GA-MA69G-S3H
  ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-24-generic 
root=/dev/mapper/BigDisks-Root ro quiet splash rootfstype=ext4 nomodeset 
video=uvesafb:mode_option=1024x768-24,mtrr=3,scroll=ywrap
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.utf8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.34.1
  RfKill:
   
  SourcePackage: linux
  WpaSupplicantLog:
   
  dmi.bios.date: 12/29/2008
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F7
  dmi.board.name: GA-MA69G-S3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF7:bd12/29/2008:svnGigabyteTechnologyCo.,Ltd.:pnGA-MA69G-S3H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-MA69G-S3H:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-MA69G-S3H
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/654311/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 665600] [NEW] Trackpoint settings are gone after resume from standby

You have been subscribed to a public bug:

Since update to Maverick trackpoint settings are gone after resume from
standby. I have made the Settings with gnome-pointing-devices and by
creating a file /etc/init/trackpoint.conf with the following content:

description Trackpoint-Einstellungen
env TPDIR=/sys/devices/platform/i8042/serio1/serio2
start on virtual-filesystems
script
  while [ ! -f $TPDIR/sensitivity ]; do
sleep 2
  done
  echo -n 200  $TPDIR/sensitivity
  echo -n 150  $TPDIR/speed
  echo -n 1  $TPDIR/press_to_select
end script

It seems like the problem is that the path to the driver settings
changes after resume. See this Post:
http://ubuntuforums.org/showpost.php?p=9996740postcount=7

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Incomplete


** Tags: maverick needs-kernel-logs needs-upstream-testing
-- 
Trackpoint settings are gone after resume from standby
https://bugs.launchpad.net/bugs/665600
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212199] Status changed to Confirmed

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212199

Title:
  Network not working after resume from suspend (r8169)

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  http://www.webupd8.org/2013/01/fix-wireless-or-wired-network-not.html
  workaround not working

  related ? info:
  
https://github.com/torvalds/linux/commit/2a15cd2ff488a9fdb55e5e34060f499853b27c77

  I am running Ubuntu 13.10 with the latest updates

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-2-generic 3.11.0-2.5
  ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
  Uname: Linux 3.11.0-2-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emanuel1634 F pulseaudio
  CurrentDmesg: [   18.315564] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link 
becomes ready
  Date: Wed Aug 14 13:42:10 2013
  HibernationDevice: RESUME=UUID=c295bea4-fefe-4d3b-8f12-ee5b580946db
  InstallationDate: Installed on 2013-05-02 (103 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130502)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=86fe6e26-730a-49ee-9ef7-096ce5dedeb0 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-2-generic N/A
   linux-backports-modules-3.11.0-2-generic  N/A
   linux-firmware1.113
  RfKill:
   
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/11/2008
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V1.10
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: MS-7360
  dmi.board.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV1.10:bd11/11/2008:svnMICRO-STARINTERNATIONALCO.,LTD:pnMS-7360:pvr1.0:rvnMICRO-STARINTERNATIONALCO.,LTD:rnMS-7360:rvr1.0:cvnMICRO-STARINTERNATIONALCO.,LTD:ct3:cvr1.0:
  dmi.product.name: MS-7360
  dmi.product.version: 1.0
  dmi.sys.vendor: MICRO-STAR INTERNATIONAL CO.,LTD

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212199/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 658042] Re: (Live system) CD not mounted

David Balažic, this bug was reported a while ago and there hasn't been
any activity in it recently. We were wondering if this is still an
issue? If so, could you please test for this with the latest development
release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ .

** Tags added: latest-bios-f7 needs-upstream-testing

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/658042

Title:
  (Live system) CD not mounted

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I booted the ubuntu-10.10-desktop-i386.iso into Try mode.

  I have 3 optical units:
   - DVD-RW : has the boot medium
   - two CD-ROM units - empty

  I inserted an iso9660 CD into one empty unit.
  It was not mounted.
  Neither if inserted into other unit.

  Mounting by mount /dev/cdrom /mnt works fine. For both units (the
  other is /dev/cdrom2).

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.33
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: i386
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'V8235'/'VIA 8235 with ALC650F at 0xd800, irq 22'
 Mixer name : 'Realtek ALC650F'
 Components : 'AC97a:414c4723'
 Controls  : 57
 Simple ctrls  : 36
  Card1.Amixer.info:
   Card hw:1 'Bt878'/'Brooktree Bt878 at 0xe3005000, irq 17'
 Mixer name : 'Bt87x'
 Components : ''
 Controls  : 3
 Simple ctrls  : 5
  Date: Mon Oct 11 01:42:17 2010
  HotplugNewDevices:
   
  HotplugNewMounts:
   
  LiveMediaBuild: Ubuntu 10.10 Maverick Meerkat - Release i386 (20101007)
  ProcCmdLine: file=/cdrom/preseed/hostname.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: linux
  Symptom: storage
  dmi.bios.date: 08/09/2004
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F7
  dmi.board.name: GA-7VAXP Ultra
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.type: 3
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF7:bd08/09/2004:svn:pn:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-7VAXPUltra:rvr:cvn:ct3:cvr:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/658042/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1007765] Re: brightness adjusting crashes system

2013-08-14 Thread Anoop

This is an update to my post No.93... Not a single time i have have faced any 
problem with the brigtness button :
after SPARX No.17 comment ( sorry for saying that it was Marwans)

This bug is FIXED for me by adding these kernel options:

GRUB_CMDLINE_LINUX_DEFAULT=quiet splash pcie_aspm=force
acpi_backlight=vendor

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1007765

Title:
  brightness adjusting crashes system

Status in “fglrx-installer” package in Ubuntu:
  Confirmed
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  When adjusting my laptops brightness the system crashes.

  what logs do in need to add and how to get them?

  System:
  -- Dell Studio 1558
  -- Ubuntu 12.04

  Video showing the process: http://www.youtube.com/watch?v=Vxp_rWXHnrg
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.0.1-0ubuntu8
  Architecture: amd64
  CompizPlugins: [core,composite,opengl,neg,commands,put]
  CompositorRunning: None
  DistUpgraded: 2012-01-26 12:27:33,165 DEBUG enabling apt cron job
  DistroCodename: precise
  DistroRelease: Ubuntu 12.04
  DistroVariant: ubuntu
  DkmsStatus:
   bcmwl, 5.100.82.38+bdcom, 3.2.0-23-generic, x86_64: installed
   bcmwl, 5.100.82.38+bdcom, 3.2.0-24-generic, x86_64: installed
   fglrx, 8.960, 3.2.0-20-generic, x86_64: installed
   fglrx, 8.960, 3.2.0-23-generic, x86_64: installed
   fglrx, 8.960, 3.2.0-24-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu
  GraphicsCard:
   Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 
Series] [1002:9553] (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:0413]
  InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012)
  JockeyStatus:
   xorg:fglrx_updates - ATI/AMD proprietary FGLRX graphics driver (post-release 
updates) (Proprietary, Disabled, Not in use)
   kmod:wl - Broadcom STA wireless driver (Proprietary, Enabled, In use) 
[auto-install]
   xorg:fglrx - ATI/AMD proprietary FGLRX graphics driver (Proprietary, 
Enabled, In use)
  MachineType: Dell Inc. Studio 1558
  NonfreeKernelModules: fglrx wl
  Package: xorg 1:7.6+12ubuntu1
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic 
root=UUID=cd6ba6ea-6e63-41cc-b872-c101873444c6 ro quiet splash
  ProcVersionSignature: Ubuntu 3.2.0-24.39-generic 3.2.16
  Tags:  precise ubuntu
  Uname: Linux 3.2.0-24-generic x86_64
  UpgradeStatus: Upgraded to precise on 2012-01-26 (129 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 09/13/2010
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A10
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A10
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: A10
  dmi.modalias: 
dmi:bvnDellInc.:bvrA10:bd09/13/2010:svnDellInc.:pnStudio1558:pvrA10:rvnDellInc.:rn:rvrA10:cvnDellInc.:ct8:cvrA10:
  dmi.product.name: Studio 1558
  dmi.product.version: A10
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.7.8-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.32-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1007765/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 658820] Re: Left mouse dissappears after running for a few minutes

Agon Bucholz, this bug was reported a while ago and there hasn't been
any activity in it recently. We were wondering if this is still an
issue? If so, could you please test for this with the latest development
release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags removed: keyboard mouse usability usb

** Tags added: maverick

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/658820

Title:
  Left mouse dissappears after running for a few minutes

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  After running Ubuntu 10.10 Maverick Meerkat for a couple of minutes,
  the left mouse key becomes unusable (e.g. clicking on objects on the
  GNOME desktop doesn't work anymore). The right mouse key still works,
  the mouse pointer is visible and can be moved as usual.

  This behaviour occurs with three different USB mice (Logitech
  Revolution, Microsoft Wireless IntelliMouse Explorer and Microsoft
  IntelliMouse Explorer 4.0); all thre mice are working fine on a
  Windows PC, so this is not an hardware issue.

  I tried to switch USB ports, but this didn't resolve the issue,
  either.

  If I connect throght SSH to this machine, I'm getting these reports:

  $ uname -a
  Linux athena 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 
x86_64 GNU/Linux

  $ tail /var/log/messages
  Oct 11 23:32:34 athena kernel: [  167.890872] usb 1-2.4: new high speed USB 
device using ehci_hcd and address 3
  Oct 11 23:32:34 athena kernel: [  168.009430] hub 1-2.4:1.0: USB hub found
  Oct 11 23:32:34 athena kernel: [  168.009620] hub 1-2.4:1.0: 4 ports detected
  Oct 12 00:11:59 athena kernel: [ 2531.709404] usb 8-1: new low speed USB 
device using uhci_hcd and address 3
  Oct 12 00:11:59 athena kernel: [ 2531.932992] input: Microsoft Microsoft 
IntelliMouseÂ® Explorer as 
/devices/pci:00/:00:1d.2/usb8/8-1/8-1:1.0/input/input4
  Oct 12 00:11:59 athena kernel: [ 2531.933129] generic-usb 
0003:045E:0095.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft 
IntelliMouseÂ® Explorer] on usb-:00:1d.2-1/input0
  Oct 12 01:46:09 athena kernel: [ 8176.785327] usb 6-2: new full speed USB 
device using uhci_hcd and address 6
  Oct 12 01:46:39 athena kernel: [ 8207.342045] usb 6-2: new full speed USB 
device using uhci_hcd and address 7
  Oct 12 01:47:10 athena kernel: [ 8237.898680] usb 6-2: new full speed USB 
device using uhci_hcd and address 8
  Oct 12 01:47:20 athena kernel: [ 8248.430649] usb 6-2: new full speed USB 
device using uhci_hcd and address 9

  $ tail /var/log/syslog
  Oct 12 01:59:55 athena sensord:   in6: +0.05 V (min = +0.00 V, max = +4.08 V)
  Oct 12 01:59:55 athena sensord:   in7: +3.07 V (min = +0.00 V, max = +4.08 V)
  Oct 12 01:59:55 athena sensord:   Vbat: +3.22 V
  Oct 12 01:59:55 athena sensord:   fan1: 1339 RPM (min = 10 RPM)
  Oct 12 01:59:55 athena sensord:   fan2: 0 RPM (min = 0 RPM)
  Oct 12 01:59:55 athena sensord:   fan3: 0 RPM (min = 0 RPM)
  Oct 12 01:59:55 athena sensord:   fan4: 1603 RPM (min = 10 RPM)
  Oct 12 01:59:55 athena sensord:   temp1: 42.0 C (min = 127.0 C,

[Kernel-packages] [Bug 659712] Re: New device name enumerated after suspend/resume cycle

Vaibhav, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: bios-outdated-2.30 needs-upstream-testing

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/659712

Title:
  New device name enumerated after suspend/resume cycle

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  On Thinkpad T61, the touchpad and trackpoint are enumerated using the
  i8042 driver to be serio devices. In 2.6.32 series kernel from Lucid,
  the trackpoint was always enumerated as serio2 after a resume and its
  sysfs entry remained under /sys/devices/platform/i8042/serio1/serio2/.

  With Maverick 2.6.35 kernel, after a resume a new device entry is
  created and older lost. So from serio1/serio2, it changes to
  serio1/serio3 after a resume, then to serio1/serio4 and so on. I set
  parameters using sysfs.conf for trackpoint sensitivity/speed and those
  are lost since a new device entry is created.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic-pae 2.6.35-22.34
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.34-generic-pae 2.6.35.4
  Uname: Linux 2.6.35-22-generic-pae i686
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  vnagarnaik   1587 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfe22 irq 49'
 Mixer name : 'Analog Devices AD1984'
 Components : 'HDA:11d41984,17aa20bb,00100400'
 Controls  : 32
 Simple ctrls  : 20
  Card29.Amixer.info:
   Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 
7KHT24WW-1.08'
 Mixer name : 'ThinkPad EC 7KHT24WW-1.08'
 Components : ''
 Controls  : 1
 Simple ctrls  : 1
  Card29.Amixer.values:
   Simple mixer control 'Console',0
 Capabilities: pswitch pswitch-joined penum
 Playback channels: Mono
 Mono: Playback [on]
  CheckboxSubmission: 1ac9995abbd9123cea98763317e72e22
  CheckboxSystem: 0ede5de78dbf0a79de4ac93c88c84721
  Date: Wed Oct 13 00:05:07 2010
  HibernationDevice: RESUME=UUID=b85f7db5-9b94-4e1f-8f04-bf8187198048
  MachineType: LENOVO 64607EU
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcCmdLine: root=UUID=9951221c-56c1-4e2b-9088-aff746e14176 ro quiet splash
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  SourcePackage: linux
  WpaSupplicantLog:
   
  dmi.bios.date: 05/11/2009

[Kernel-packages] [Bug 661411] Re: Multi-core load balancing not working properly after suspend to disk

Felix Kuehling, this bug was reported a while ago and there hasn't been
any activity in it recently. We were wondering if this is still an
issue? If so, could you please test for this with the latest development
release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: bios-outdated-2101

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/661411

Title:
  Multi-core load balancing not working properly after suspend to disk

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  CPU: Intel(R) Core(TM) i7 CPU 860, 4 cores, hyperthreading

  Symptoms: After suspending to disk load balancing of processes across
  CPU cores is not working properly. Runnable processes have to share a
  CPU core even if idle CPU cores are available. This is particularly
  noticeable when running parallel builds (e.g. make -j8 ...). They take
  much longer and the GNOME system monitor applet shows that most CPU
  cores are idle when there is enough work to keep them all busy.

  A simple test to visualize the problem is to run (while true; do
  true; done)  (while true; do true; done) in bash and look at the CPU
  usage in top. After a fresh boot, the two subshells run with 100% CPU
  usage each, so each gets its own core to run on. When running this
  experiment after a suspend/resume cycle the two subshells run with 50%
  CPU usage each, so they're made to share a CPU core, although idle CPU
  cores are available.

  Steps to reproduce:
  * Boot system
  * log in as normal user
  * run the following command in a terminal window running bash: (while true; 
do true; done)  (while true; do true; done)
  * In a second terminal window run top and observe two bash processes at the 
top, each running with 100% CPU usage
(each bash gets its own CPU core)
  * kill the two bash subshell processes
  * suspend to disk
  * wake up the system
  * Run the same command as above: (while true; do true; done)  (while true; 
do true; done)
  * In top the two bash processes run with 50% CPU usage
(the two bash processes apparently share one CPU core, although idle cores 
are available)

  Expected result: load balancing should continue working after
  resuming. The two bash subshells should each run with 100% CPU usage.

  Actual result: load balancing is broken after resume. The two bash
  subshells have to share a CPU core even when idle CPU cores are
  available to balance the load.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.34
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.34-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic x86_64
  NonfreeKernelModules: fglrx
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: VT1828S Analog [VT1828S Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   USERPID ACCESS COMMAND

[Kernel-packages] [Bug 659837] Re: Sierra mobile bradband does not wake from usb auto-suspend

Peter Sasi, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: bios-outdated-2.30 needs-upstream-testing regression-
potential

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/659837

Title:
  Sierra mobile bradband does not wake from usb auto-suspend

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I am using NetworkManager (and ModemManager under it) in 10.10
  Maverick (the issue was also present on 10.04 Lucid as well, before I
  upgraded) on my Lenovo Thinkpad T61, kernel 2.6.35-22-generic.

  I started setting power/level to auto using udev for power saving due
  to usb auto suspend.

  Connecting to moble broadband fails if /sys/bus/usb/devices/6-1/power/level 
contains auto and the device has suspended.
  It succeeds, if it is set to on.

  I can connect with power/level set to auto only if I am fast enough
  and Disable then Enable Mobile Broadband in NetworkManager in quick
  succession, before the device has time to suspend.

  Seems like NetworkManager / Kernel cannot get sierra module out of
  suspend using ttyUSBx.

  Logs according to NetworkManager / ModemManager bug reporting protocol
  are also attached.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.33
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.33~phc0-generic-phc 2.6.35.4
  Uname: Linux 2.6.35-22-generic-phc x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sape   1847 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfe22 irq 49'
 Mixer name : 'Analog Devices AD1984'
 Components : 'HDA:11d41984,17aa20bb,00100400'
 Controls  : 31
 Simple ctrls  : 19
  Card29.Amixer.info:
   Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 
7KHT24WW-1.08'
 Mixer name : 'ThinkPad EC 7KHT24WW-1.08'
 Components : ''
 Controls  : 1
 Simple ctrls  : 1
  Card29.Amixer.values:
   Simple mixer control 'Console',0
 Capabilities: pswitch pswitch-joined penum
 Playback channels: Mono
 Mono: Playback [on]
  Date: Wed Oct 13 13:08:27 2010
  HibernationDevice: RESUME=UUID=ac20c706-49b8-4afa-a907-2c79ff5196e1
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027)
  MachineType: LENOVO 6460EDG
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic-phc

[Kernel-packages] [Bug 663372] Re: With multiple keyboards, pressing NumLock effects all keyboards

Burton Samograd, this is as designed. Thank you again for taking the
time to report this bug and helping to make Ubuntu better. Please submit
any future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Confirmed = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/663372

Title:
  With multiple keyboards, pressing NumLock effects all keyboards

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  On a system with multiple USB keyboards plugged in, pressing the
  NumLock key on one of the keyboards will cause all of the keyboards to
  behave like they have had their NumLock pressed (both LED will change
  and the behavior of the number pad).

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-25-generic 2.6.32-25.44
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7
  Uname: Linux 2.6.32-25-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp4', '/dev/dsp3', 
'/dev/dsp2', '/dev/dsp1', '/dev/dsp', '/dev/snd/by-id', '/dev/snd/controlC4', 
'/dev/snd/pcmC4D0c', '/dev/snd/pcmC4D0p', '/dev/snd/controlC3', 
'/dev/snd/pcmC3D0c', '/dev/snd/pcmC3D0p', '/dev/snd/controlC2', 
'/dev/snd/pcmC2D0c', '/dev/snd/pcmC2D0p', '/dev/snd/controlC1', 
'/dev/snd/pcmC1D0c', '/dev/snd/pcmC1D0p', '/dev/snd/by-path', 
'/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', 
'/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer', 
'/dev/sequencer2', '/dev/sequencer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'V8237'/'VIA 8237 with ALC850 at 0xb000, irq 22'
 Mixer name : 'Realtek ALC850 rev 0'
 Components : 'AC97a:414c4790'
 Controls  : 49
 Simple ctrls  : 30
  Card1.Amixer.info:
   Card hw:1 'default'/'C-Media Electronics Inc.   USB PnP Sound Device 
  at usb-:00:10'
 Mixer name : 'USB Mixer'
 Components : 'USB0d8c:013a'
 Controls  : 7
 Simple ctrls  : 3
  Card2.Amixer.info:
   Card hw:2 'default_1'/'C-Media Electronics Inc.   USB PnP Sound Device   
at usb-:00:10'
 Mixer name : 'USB Mixer'
 Components : 'USB0d8c:0139'
 Controls  : 5
 Simple ctrls  : 3
  Card3.Amixer.info:
   Card hw:3 'default_2'/'C-Media USB Headphone Set   at 
usb-:00:10.4-4.1.2, full speed'
 Mixer name : 'USB Mixer'
 Components : 'USB0d8c:000c'
 Controls  : 7
 Simple ctrls  : 3
  Card4.Amixer.info:
   Card hw:4 'default_3'/'Generic USB Audio Deviceat 
usb-:00:10.4-4.4.2, full speed'
 Mixer name : 'USB Mixer'
 Components : 'USB0d8c:000e'
 Controls  : 7
 Simple ctrls  : 3
  Date: Tue Oct 19 10:13:07 2010
  HibernationDevice: RESUME=UUID=a35b731c-0f5a-42e4-9ac6-74a20bc33ba6
  InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429)
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  MachineType: MSI MS-6702E
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic 
root=UUID=706afc9c-b5bc-4435-86ad-54b7809d2b21 ro nomodeset quiet splash
  ProcEnviron:
   LANGUAGE=en
   LANG=en_CA.utf8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.34.1
  RfKill:
   
  SourcePackage: linux
  dmi.bios.date: 01/27/2006
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 080011
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: MS-6702E
  dmi.board.vendor: MSI
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr080011:bd01/27/2006:svnMSI:pnMS-6702E:pvr1.0:rvnMSI:rnMS-6702E:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: MS-6702E
  dmi.product.version: 1.0
  dmi.sys.vendor: MSI

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/663372/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 663806] Re: Touchpad middle button not working in Dell precision m6400/m6500 after maverick upgrade

oriolpont, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/663806/comments/49
regarding this being fixed with an update. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Tags added: bios-outdated-a11 needs-upstream-testing

** Changed in: linux (Ubuntu)
   Status: Confirmed = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/663806

Title:
  Touchpad middle button not  working in Dell precision m6400/m6500
  after maverick upgrade

Status in The Linux Kernel:
  Invalid
Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  The middlebutton of the touchpad in a dell precision m6400 and m6500
  laptops stopped working after upgrade from karmic to maverick. This is
  a regression that started from Ubuntu 2.6.35-22-generic kernel
  onwards. When using the equivalent mainline kernels, the middlebutton
  works without problems.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: xorg 1:7.5+6ubuntu3
  Uname: Linux 2.6.35-02063507-generic x86_64
  NonfreeKernelModules: nvidia wl
  Architecture: amd64
  Date: Wed Oct 20 11:57:59 2010
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027)
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: xorg
  Symptom: display
  system:
   distro: Ubuntu
   codename:   maverick
   architecture:   x86_64
   kernel: 2.6.35-02063507-generic
  ---
  Architecture: amd64
  DistroRelease: Ubuntu 10.10
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027)
  NonfreeKernelModules: nvidia wl
  Package: linux (not installed)
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.utf8
   SHELL=/bin/bash
  Tags: maverick
  Uname: Linux 2.6.35-02063507-generic x86_64
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare vboxusers

  ---
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  AplayDevices:
    List of PLAYBACK Hardware Devices 
   card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
     Subdevices: 2/2
     Subdevice #0: subdevice #0
     Subdevice #1: subdevice #1
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  oriol  1968 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xf6ffc000 irq 48'
     Mixer name : 'IDT 92HD71B7X'
     Components : 'HDA:111d76b2,10280251,00100302'
     Controls  : 20
     Simple ctrls  : 14
  DistroRelease: Ubuntu 10.10
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027)
  MachineType: Dell Inc. Precision M6400
  NonfreeKernelModules: nvidia wl
  Package: linux (not installed)
  PccardctlIdent:
   Socket 0:
     no product info available
  PccardctlStatus:
   Socket 0:
     no card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic 
root=UUID=fd982df1-f38e-4005-a8f7-a49046195ad1 ro quiet splash
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.utf8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.35-22.35-generic 2.6.35.4
  Regression: Yes
  RelatedPackageVersions: linux-firmware 1.38
  Reproducible: Yes
  Tags: maverick kernel-uncat regression-release needs-upstream-testing
  Uname: Linux 2.6.35-22-generic x86_64
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare vboxusers
  dmi.bios.date: 07/30/2010
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A10
  dmi.board.name: 0D138P
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA10:bd07/30/2010:svnDellInc.:pnPrecisionM6400:pvr:rvnDellInc.:rn0D138P:rvr:cvnDellInc.:ct8:cvr:
  dmi.product.name: Precision M6400
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/663806/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 971876] Re: Realtek Card Reader RTL8411 Device 5289 (PCI 03:00.0) Driver and udisks Rule

2013-08-14 Thread tobiasBora

This solution given here :
https://bbs.archlinux.org/viewtopic.php?pid=1263089#p1263089 works
perfecly :

1. Download rts_bpp.tar.bz2 from launchpad (I tried with this one : 
https://bugs.launchpad.net/ubuntu/+source/udisks/+bug/971876/+attachment/2991730/+files/rts_bpp.tar.bz2)
2. Extract archive, edit rtsx.c:
2.1. Remove __devinit from rtsx_probe in line 893
2.2. Remove __devexit from rtsx_remove in line 1048
2.3. Extract rtsx_remove from __devexit_p() in line 1074
3. Compile with make
4. As root, make install
5. Blacklist rtsx_pci in /etc/modprobe.d/rtsx_blacklist.conf (add blacklist 
rtsx_pci)
6. 'modprobe rts_bpp'
7. run mkinitcpio -p linux (I'm not entirely sure this is necessary, but I run 
it, so I'm including it here).
8. Restart the machine
9. You're good to go.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/971876

Title:
  Realtek Card Reader RTL8411 Device 5289 (PCI 03:00.0) Driver and
  udisks Rule

Status in The Linux Kernel:
  New
Status in “linux” package in Ubuntu:
  Fix Released
Status in “udisks” package in Ubuntu:
  Fix Released

Bug description:
  We have been provided with a new Realtek Card Reader driver for this
  device. The code is GPL licensed but we don't see it publicly
  available yet. This is a new driver module with the name rts_bpp. As
  such a new udisks rule is necessary for automounting.

  New driver is attached rts_bpp.tar.bz2.

  For automount, the following line needs to be added to
  '/lib/udev/rules.d/80-udisks.rules'

  DRIVERS==rts_bpp, ENV{ID_DRIVE_FLASH_SD}=1

  #

  We created a DKMS module .deb to make install easier until the driver
  can be included in Ubuntu. Commands:

  wget http://planet76.com/drivers/realtek/rts-bpp-dkms_1.1_all.deb
  sudo apt-get install dkms
  sudo dpkg -i rts-bpp-dkms_1.1_all.deb
  echo 'DRIVERS==rts_bpp, ENV{ID_DRIVE_FLASH_SD}=1' | sudo tee -a 
/lib/udev/rules.d/81-udisks-realtek.rules

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: udisks 1.0.4-5ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-21.34-generic 3.2.13
  Uname: Linux 3.2.0-21-generic x86_64
  ApportVersion: 2.0-0ubuntu2
  Architecture: amd64
  Date: Mon Apr  2 14:16:29 2012
  HotplugNewDevices: /dev/sdb1
  HotplugNewMounts: /dev/sdb1 /media/6331-6363 vfat 
rw,nosuid,nodev,relatime,uid=2,gid=2,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro
 0 0
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120301)
  MachineType: CLEVO CO. W240EU/W250EUQ/W270EUQ
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-21-generic 
root=UUID=596df159-fc9a-41b4-8528-5dca5215dbd5 ro quiet splash vt.handoff=7
  SourcePackage: udisks
  Symptom: storage
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/24/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W240EU/W250EUQ/W270EUQ
  dmi.board.vendor: CLEVO CO.
  dmi.board.version: V3.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd02/24/2012:svnCLEVOCO.:pnW240EU/W250EUQ/W270EUQ:pvrNotApplicable:rvnCLEVOCO.:rnW240EU/W250EUQ/W270EUQ:rvrV3.0:cvnNoEnclosure:ct10:cvrN/A:
  dmi.product.name: W240EU/W250EUQ/W270EUQ
  dmi.product.version: Not Applicable
  dmi.sys.vendor: CLEVO CO.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/971876/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 971876] Re: Realtek Card Reader RTL8411 Device 5289 (PCI 03:00.0) Driver and udisks Rule

2013-08-14 Thread tobiasBora

I forgot to remove the 7) which is useless (and which was for
ArchLinux).

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/971876

Title:
  Realtek Card Reader RTL8411 Device 5289 (PCI 03:00.0) Driver and
  udisks Rule

Status in The Linux Kernel:
  New
Status in “linux” package in Ubuntu:
  Fix Released
Status in “udisks” package in Ubuntu:
  Fix Released

Bug description:
  We have been provided with a new Realtek Card Reader driver for this
  device. The code is GPL licensed but we don't see it publicly
  available yet. This is a new driver module with the name rts_bpp. As
  such a new udisks rule is necessary for automounting.

  New driver is attached rts_bpp.tar.bz2.

  For automount, the following line needs to be added to
  '/lib/udev/rules.d/80-udisks.rules'

  DRIVERS==rts_bpp, ENV{ID_DRIVE_FLASH_SD}=1

  #

  We created a DKMS module .deb to make install easier until the driver
  can be included in Ubuntu. Commands:

  wget http://planet76.com/drivers/realtek/rts-bpp-dkms_1.1_all.deb
  sudo apt-get install dkms
  sudo dpkg -i rts-bpp-dkms_1.1_all.deb
  echo 'DRIVERS==rts_bpp, ENV{ID_DRIVE_FLASH_SD}=1' | sudo tee -a 
/lib/udev/rules.d/81-udisks-realtek.rules

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: udisks 1.0.4-5ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-21.34-generic 3.2.13
  Uname: Linux 3.2.0-21-generic x86_64
  ApportVersion: 2.0-0ubuntu2
  Architecture: amd64
  Date: Mon Apr  2 14:16:29 2012
  HotplugNewDevices: /dev/sdb1
  HotplugNewMounts: /dev/sdb1 /media/6331-6363 vfat 
rw,nosuid,nodev,relatime,uid=2,gid=2,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro
 0 0
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120301)
  MachineType: CLEVO CO. W240EU/W250EUQ/W270EUQ
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-21-generic 
root=UUID=596df159-fc9a-41b4-8528-5dca5215dbd5 ro quiet splash vt.handoff=7
  SourcePackage: udisks
  Symptom: storage
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/24/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W240EU/W250EUQ/W270EUQ
  dmi.board.vendor: CLEVO CO.
  dmi.board.version: V3.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd02/24/2012:svnCLEVOCO.:pnW240EU/W250EUQ/W270EUQ:pvrNotApplicable:rvnCLEVOCO.:rnW240EU/W250EUQ/W270EUQ:rvrV3.0:cvnNoEnclosure:ct10:cvrN/A:
  dmi.product.name: W240EU/W250EUQ/W270EUQ
  dmi.product.version: Not Applicable
  dmi.sys.vendor: CLEVO CO.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/971876/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 971876] Re: Realtek Card Reader RTL8411 Device 5289 (PCI 03:00.0) Driver and udisks Rule

2013-08-14 Thread tobiasBora

( Tested with the Kernel 3.5.0-37-generic)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/971876

Title:
  Realtek Card Reader RTL8411 Device 5289 (PCI 03:00.0) Driver and
  udisks Rule

Status in The Linux Kernel:
  New
Status in “linux” package in Ubuntu:
  Fix Released
Status in “udisks” package in Ubuntu:
  Fix Released

Bug description:
  We have been provided with a new Realtek Card Reader driver for this
  device. The code is GPL licensed but we don't see it publicly
  available yet. This is a new driver module with the name rts_bpp. As
  such a new udisks rule is necessary for automounting.

  New driver is attached rts_bpp.tar.bz2.

  For automount, the following line needs to be added to
  '/lib/udev/rules.d/80-udisks.rules'

  DRIVERS==rts_bpp, ENV{ID_DRIVE_FLASH_SD}=1

  #

  We created a DKMS module .deb to make install easier until the driver
  can be included in Ubuntu. Commands:

  wget http://planet76.com/drivers/realtek/rts-bpp-dkms_1.1_all.deb
  sudo apt-get install dkms
  sudo dpkg -i rts-bpp-dkms_1.1_all.deb
  echo 'DRIVERS==rts_bpp, ENV{ID_DRIVE_FLASH_SD}=1' | sudo tee -a 
/lib/udev/rules.d/81-udisks-realtek.rules

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: udisks 1.0.4-5ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-21.34-generic 3.2.13
  Uname: Linux 3.2.0-21-generic x86_64
  ApportVersion: 2.0-0ubuntu2
  Architecture: amd64
  Date: Mon Apr  2 14:16:29 2012
  HotplugNewDevices: /dev/sdb1
  HotplugNewMounts: /dev/sdb1 /media/6331-6363 vfat 
rw,nosuid,nodev,relatime,uid=2,gid=2,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro
 0 0
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120301)
  MachineType: CLEVO CO. W240EU/W250EUQ/W270EUQ
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-21-generic 
root=UUID=596df159-fc9a-41b4-8528-5dca5215dbd5 ro quiet splash vt.handoff=7
  SourcePackage: udisks
  Symptom: storage
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/24/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W240EU/W250EUQ/W270EUQ
  dmi.board.vendor: CLEVO CO.
  dmi.board.version: V3.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd02/24/2012:svnCLEVOCO.:pnW240EU/W250EUQ/W270EUQ:pvrNotApplicable:rvnCLEVOCO.:rnW240EU/W250EUQ/W270EUQ:rvrV3.0:cvnNoEnclosure:ct10:cvrN/A:
  dmi.product.name: W240EU/W250EUQ/W270EUQ
  dmi.product.version: Not Applicable
  dmi.sys.vendor: CLEVO CO.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/971876/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 667478] Re: SIOCSIFFLAGS: Cannot allocate memory

pschonmann, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Description changed:

  Binary package hint: gnome-system-tools
  
  user@ubuntu:~$ sudo ifconfig eth0 down
  user@ubuntu:~$ sudo ifconfig eth0 up
  SIOCSIFFLAGS: Cannot allocate memory
  
  dmesg:
  
  [ 8255.927028] ifconfig: page allocation failure. order:3, mode:0x4020
  [ 8255.927032] Pid: 27488, comm: ifconfig Tainted: P
2.6.35-22-generic #35-Ubuntu
  [ 8255.927034] Call Trace:
  [ 8255.927042]  [81108253] __alloc_pages_slowpath+0x583/0x590
  [ 8255.927045]  [811083fa] __alloc_pages_nodemask+0x19a/0x1f0
  [ 8255.927049]  [815891be] ? _raw_spin_lock+0xe/0x20
  [ 8255.927053]  [8113fb02] kmalloc_large_node+0x62/0xb0
  [ 8255.927055]  [8114367c] __kmalloc_node_track_caller+0x13c/0x1f0
  [ 8255.927059]  [8148fcc6] ? __netdev_alloc_skb+0x36/0x60
  [ 8255.927061]  [8148f9b3] __alloc_skb+0x83/0x170
  [ 8255.927063]  [8148fcc6] __netdev_alloc_skb+0x36/0x60
  [ 8255.927076]  [a000b1fc] rtl8169_rx_fill+0xbc/0x260 [r8169]
  [ 8255.927080]  [812cc010] ? swiotlb_map_page+0x0/0xf0
  [ 8255.927084]  [a000be63] rtl8169_init_ring+0x73/0xb0 [r8169]
  [ 8255.927088]  [a000c141] rtl8169_open+0x1b1/0x460 [r8169]
  [ 8255.927092]  [8149b287] __dev_open+0xa7/0xf0
  [ 8255.927094]  [814996d1] __dev_change_flags+0xa1/0x180
  [ 8255.927097]  [8149b198] dev_change_flags+0x28/0x70
  [ 8255.927100]  [814fdea3] devinet_ioctl+0x5a3/0x600
  [ 8255.927103]  [814ff2b0] inet_ioctl+0x90/0xb0
  [ 8255.927106]  [81485b40] sock_do_ioctl+0x30/0x60
  [ 8255.927108]  [81485cb9] sock_ioctl+0x79/0x2b0
  [ 8255.927111]  [8116295d] vfs_ioctl+0x3d/0xd0
  [ 8255.927114]  [81163231] do_vfs_ioctl+0x81/0x340
  [ 8255.927117]  [8158cf2e] ? do_page_fault+0x15e/0x350
  [ 8255.927119]  [81163571] sys_ioctl+0x81/0xa0
  [ 8255.927122]  [8100a0f2] system_call_fastpath+0x16/0x1b
  [ 8255.927124] Mem-Info:
  [ 8255.927125] Node 0 DMA per-cpu:
  [ 8255.927128] CPU0: hi:0, btch:   1 usd:   0
  [ 8255.927129] CPU1: hi:0, btch:   1 usd:   0
  [ 8255.927130] Node 0 DMA32 per-cpu:
  [ 8255.927132] CPU0: hi:  186, btch:  31 usd: 139
  [ 8255.927134] CPU1: hi:  186, btch:  31 usd: 170
  [ 8255.927136] Node 0 Normal per-cpu:
  [ 8255.927138] CPU0: hi:  186, btch:  31 usd: 156
  [ 8255.927139] CPU1: hi:  186, btch:  31 usd:  55
  [ 8255.927143] active_anon:255390 inactive_anon:61872 isolated_anon:0
  [ 8255.927144]  active_file:263758 inactive_file:332763 isolated_file:0
  [ 8255.927145]  unevictable:611 dirty:1311 writeback:0 unstable:0
  [ 8255.927146]  free:24044 slab_reclaimable:26025 slab_unreclaimable:5189
  [ 8255.927146]  mapped:34777 shmem:3120 pagetables:7667 bounce:0
  [ 8255.927148] Node 0 DMA free:15844kB min:28kB low:32kB high:40kB 
active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB 
unevictable:0kB isolated(anon):0kB isolated(file):0kB

[Kernel-packages] [Bug 666502] Re: System halts when entropy exhausted, continues when it receivews new entropy

kschmitt, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: needs-full-computer-model regression-potential

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/666502

Title:
  System halts when entropy exhausted, continues when it receivews new
  entropy

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  The system halts when entropy is exhausted, then continues when it
  receives more entropy.

  This happens during boot, necessitating key-twiddling or mouse-
  jiggling in order to boot.

  Once the system is fully booted, if one pings it, pings work at first,
  then halt when the entropy is exhausted.  When new entropy is provided
  (mouse jiggle/key twiddle) they continue.

  I'm checking entropy by looking in
  /proc/sys/kernel/random/entropy_avail, and on this system it rarely
  peeks 200, and us usually wavering around 100.  That's really low, but
  it _should_not_matter_ if there is entropy or not for booting, normal
  operation, or basic TCP/IP usage.

  
  Note, I do not own this laptop, I was asked to fix it, and will return it to 
it's owner now, suggesting they install ubuntu 10.04 (which worked), or a 
different distro.  Hopefully there will be enough information in the bug report 
to track down why the system is using entropy all the time.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.35
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.35-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  AplayDevices:
    List of PLAYBACK Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pcguru 1515 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xf044 irq 46'
 Mixer name : 'Realtek ALC272'
 Components : 'HDA:10ec0272,1179ff6e,0011'
 Controls  : 17
 Simple ctrls  : 10
  Date: Mon Oct 25 15:33:16 2010
  HibernationDevice: RESUME=UUID=70b13820-2fc4-47d5-babb-5dc71a8ff6eb
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release i386 (20101007)
  MachineType: TOSHIBA TOSHIBA NB205
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic 
root=UUID=4716231a-7aea-4e58-80fb-97ee1710ed9b ro quiet splash
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  SourcePackage: linux

[Kernel-packages] [Bug 669023] Re: boot screen takes about 90 seconds between grub and seeing the boot logo

Prunus dulcis, if you have a broken hard drive while trying to boot,
it's not a surprise you are having boot delays. Thank you again for
taking the time to report this bug and helping to make Ubuntu better.
Please submit any future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Confirmed = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/669023

Title:
  boot screen takes about 90 seconds between grub and seeing the boot
  logo

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  I boot my system from a usb stick (the home partition is on a separate 
SD-Card). When I insert the harddrive (without using it) the system boots much 
faster from the usb stick than without the harddrive while only accessing the 
harddrive one or two times at the beginning.
  Without a harddrive in it, ubuntu takes about 80 to 90 seconds each time 
between showing grub and showing the ubuntu logo plymouth screen and then loads 
within about 10 seconds to the desktop (really fast).

  Were it not much faster with the harddrive (which is not really
  functional because it has a physical header crash), I would just
  assume it was a slow usb drive, but this test lead me to believe that
  somehow the boot system is probing for a harddrive for a long time.
  Still I have no idea if this is what is really happening...

  1)Description:Ubuntu 10.10
  Release:  10.10

  2) If it is plymouth
  plymouth:
Installed: 0.8.2-2ubuntu5
Candidate: 0.8.2-2ubuntu5
Version table:
   *** 0.8.2-2ubuntu5 0
  500 http://de.archive.ubuntu.com/ubuntu/ maverick/main i386 Packages
  100 /var/lib/dpkg/status

  3) Boot as fast as with a harddrive inserted

  4) Boots a lot slower than with an inserted but not used harddrive

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: plymouth 0.8.2-2ubuntu5
  ProcVersionSignature: Ubuntu 2.6.35-22.35-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic i686
  Architecture: i386
  Date: Sun Oct 31 10:06:10 2010
  DefaultPlymouth: /lib/plymouth/themes/ubuntu-logo/ubuntu-logo.plymouth
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Beta i386 (20100901.1)
  MachineType: IBM 1866WBA
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 3.3V 32-bit PC Card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic 
root=UUID=969cbe95-7a27-405e-833c-a16a9b6983e3 ro quiet splash
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  SourcePackage: plymouth
  TextPlymouth: /lib/plymouth/themes/ubuntu-text/ubuntu-text.plymouth
  dmi.bios.date: 03/14/2006
  dmi.bios.vendor: IBM
  dmi.bios.version: 75ET56WW (2.02 )
  dmi.board.name: 1866WBA
  dmi.board.vendor: IBM
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: IBM
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnIBM:bvr75ET56WW(2.02):bd03/14/2006:svnIBM:pn1866WBA:pvrThinkPadX41Tablet:rvnIBM:rn1866WBA:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable:
  dmi.product.name: 1866WBA
  dmi.product.version: ThinkPad X41 Tablet
  dmi.sys.vendor: IBM

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/669023/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 669621] Re: MCE being triggered

Anthony Sheetz, as per
http://www.tyan.com/support_download_bios.aspx?model=S.S5197 an update
is available for your BIOS (v1.12). If you update to this, does it
change anything?

If not, could you please both specify what happened, and provide the output of 
the following terminal command:
sudo dmidecode -s bios-version  sudo dmidecode -s bios-release-date

Please note your current BIOS is already in the Bug Description, so
posting this on the old BIOS would not be helpful.

Thank you for your understanding.

** Tags added: bios-outdated-v1.12

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/669621

Title:
  MCE being triggered

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Running 10.04.1 LTS server, upgraded from 8.04 LTS.
  Running a command such as apt-cache search oauth will cause an MCE to be 
registered, and the server to reboot.  Did not occur in 8.04.
  Server is stable if nosmp is used as a startup option in grub.
  Tried mainline kernel, and saw the same bug.
  Tried noacpi and that did not fix the problem.
  This is on a single Core Duo, dual core processor machine.

  Bug report was started by running
  sudo apport-bug -p linux

  Attached is snapshot of console after MCE
  What additional info is needed?

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-25-generic-pae 2.6.32-25.45
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-25.45-generic-pae 2.6.32.21+drm33.7
  Uname: Linux 2.6.32-25-generic-pae i686
  AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 
2: ls: cannot access /dev/snd/: No such file or directory
  AplayDevices: aplay: device_list:223: no soundcards found...
  Architecture: i386
  ArecordDevices: arecord: device_list:223: no soundcards found...
  CurrentDmesg:
   [   10.735013] type=1505 audit(1288641106.531:14):  
operation=profile_replace pid=1187 name=/usr/sbin/mysqld
   [   19.616037] eth0: no IPv6 routers present
  Date: Mon Nov  1 15:52:35 2010
  MachineType: empty empty
  PciMultimedia:
   
  ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-25-generic-pae 
root=UUID=e0b98c52-85fa-4b0a-9d2b-5000c9dc66d6 ro nosmp
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: linux
  dmi.bios.date: 12/01/2006
  dmi.bios.vendor: Phoenix Technologies LTD
  dmi.bios.version: 6.00
  dmi.board.name: S5197
  dmi.board.vendor: TYAN Computer Corporation
  dmi.board.version: empty
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 1
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd12/01/2006:svnempty:pnempty:pvrempty:rvnTYANComputerCorporation:rnS5197:rvrempty:cvnNoEnclosure:ct1:cvrN/A:
  dmi.product.name: empty
  dmi.product.version: empty
  dmi.sys.vendor: empty

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/669621/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 672387] Re: No link on RTL8111D - also breaks link on Windows

Loïc Minier, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications-Accessories-Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: latest-bios-f11 regression-potential

** Description changed:

- Hi
- 
- I have a Gigabyte GA-P55-UD3 motherboard which comes with a builtin Realtek 
RTL8111D onboard ethernet:
- 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B 
PCI Express Gigabit Ethernet controller (rev 03)
- Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
- Flags: bus master, fast devsel, latency 0, IRQ 49
- I/O ports at be00 [size=256]
- Memory at fbeff000 (64-bit, prefetchable) [size=4K]
- Memory at fbef8000 (64-bit, prefetchable) [size=16K]
- [virtual] Expansion ROM at fbe0 [disabled] [size=128K]
- Capabilities: access denied
- Kernel driver in use: r8169
- Kernel modules: r8169
- 
- This doesn't work at all under Ubuntu 10.10 with all updates installed, I 
never get a link: Network Manager shows the adapter as disconnected and ip link 
show eth0 gives:
+ MY Realtek RTL8111D onboard ethernet this doesn't work in Ubuntu 10.10. 
Network Manager shows the adapter as disconnected and ip link show eth0 gives:
  2: eth0: NO-CARRIER,BROADCAST,MULTICAST,UP mtu 1500 qdisc pfifo_fast state 
DOWN qlen 1000
  
- The adapter works under Windows 7.
- 
- If one has booted Linux once, then the adapter doesn't work under
- Windows 7 anymore, even after a power off/power on cycle.  One needs to
- power off and *turn off the power supply* (on/off power supply switch or
- remove power cable) for e.g. 5 mn to get the adapter to work again under
- Windows.
- 
- Bye,
+ The adapter works under Windows 7. If one has booted Linux once, then
+ the adapter doesn't work under Windows 7 anymore, even after a power
+ off/power on cycle.  One needs to power off and *turn off the power
+ supply* (on/off power supply switch or remove power cable) for e.g. 5 mn
+ to get the adapter to work again under Windows.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic-pae 2.6.35-22.35
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.35-generic-pae 2.6.35.4
  Uname: Linux 2.6.35-22-generic-pae i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: i386
  AudioDevicesInUse:
-  USERPID ACCESS COMMAND
-  /dev/snd/controlC0:  lool   1666 F pulseaudio
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  lool   1666 F pulseaudio
  CRDA: Error: [Errno 2] Aucun fichier ou dossier de ce type
  Card0.Amixer.info:
-  Card hw:0 'Intel'/'HDA Intel at 0xfbff8000 irq 52'
-Mixer name : 'Realtek ALC888'
-Components : 'HDA:10ec0888,1458a002,0011'
-Controls  : 38
-Simple ctrls  : 21
+  Card hw:0 'Intel'/'HDA Intel at 0xfbff8000 irq 52'
+    Mixer name : 'Realtek ALC888'
+    Components : 'HDA:10ec0888,1458a002,0011'
+    Controls  : 38
+    Simple ctrls  : 21
  Card1.Amixer.info:
-  Card hw:1 'Generic'/'HD-Audio Generic at 0xfbcfc000 irq 53'
-

[Kernel-packages] [Bug 642792] Re: ALT+PrtSc not recognised: breaks built-in screenshot function

Maverick EOL - Won't Fix.

** Changed in: linux (Ubuntu Maverick)
   Status: Confirmed = Invalid

** Tags added: bios-outdated-1903 needs-upstream-testing

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/642792

Title:
  ALT+PrtSc not recognised: breaks built-in screenshot function

Status in Release Notes for Ubuntu:
  Invalid
Status in “compiz” package in Ubuntu:
  Invalid
Status in “linux” package in Ubuntu:
  Incomplete
Status in “metacity” package in Ubuntu:
  Invalid
Status in “compiz” source package in Maverick:
  Invalid
Status in “linux” source package in Maverick:
  Invalid
Status in “metacity” source package in Maverick:
  Invalid

Bug description:
  Binary package hint: xkeyboard-config

  On an EN-GB keyboard (and maybe others) ALT+PrtSc is the default
  keyboard shortcut for Take a screenshot of a window as configured in
  System - Preferences - Keyboard Shortcuts. However the system
  doesn't seem to respond to that keyboard combination at all. Pressing
  ALT+PrtSc on a default Maverick install does nothing. Indeed
  attempting to _set_ that keyboard shortcut in the Keyboard Shortcuts
  dialog results in it not being registered.

  Workaround:
  sudo sysctl -w kernel.sysrq=0

  Steps to reproduce:-

  1) Try to screenshot the entire desktop with PrtSc - this works
  2) Try to take a screenshot of one active window with ALT+PrtSc - nothing 
happens.

  Additionally

  1) Navigate to System - Preferences - Keyboard Shortcuts
  2) Scroll down to Desktop - Take a screenshot of a window, and then click 
that line in order to set a keyboard shortcut for the action
  3) Press ALT+PrtSc - nothing happens
  4) Press a different keyboard combination such as CTRL+PrtSc or 
Super/Windows+PrtSc - this works

  Additionally

  1) Open a terminal
  2) Run 'xev' and then press ALT+PrtSc. Observe data in the xev terminal 
window when ALT is pressed, but nothing for ALT+PrtSc

  Seems a fairly critical regression bug given we document this keyboard
  shortcut in the help, and it's very commonly used by documenters and
  people getting support. It works fine in previous releases.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: xkb-data 1.8-1ubuntu8
  ProcVersionSignature: Ubuntu 2.6.35-22.32-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  256.53  Fri Aug 27 20:27:48 
PDT 2010
   GCC version:  gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4)
  Architecture: amd64
  CurrentDmesg:
   [   22.090007] eth1: no IPv6 routers present
   [  691.401253] show_signal_msg: 9 callbacks suppressed
   [  691.401258] gnome-help[2307]: segfault at 35a3f08 ip 7f9f58d3043e sp 
7d377130 error 4 in libxml2.so.2.7.7[7f9f58cae000+147000]
  Date: Sun Sep 19 14:19:15 2010
  Dependencies:

  DkmsStatus:
   nvidia-current, 256.53, 2.6.35-22-generic, x86_64: installed
   nvidia-current, 256.53, 2.6.35-21-generic, x86_64: installed
   nvidia-current, 256.53, 2.6.35-20-generic, x86_64: installed
  InstallationMedia: Ubuntu 10.04.1 LTS Lucid Lynx - Release amd64 
(20100816.1)
  MachineType: System manufacturer System Product Name
  PackageArchitecture: all
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic 
root=UUID=fb22b4e1-1576-4bf8-8272-15300bc7de38 ro quiet splash
  ProcEnviron:
   LANG=en_GB.utf8
   SHELL=/bin/bash
  SourcePackage: xkeyboard-config
  dmi.bios.date: 04/24/2009
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: ASUS P5N32-E SLI ACPI BIOS Revision 1801
  dmi.board.name: P5N32-E SLI
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: 1.XX
  dmi.chassis.asset.tag: 123456789000
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvrASUSP5N32-ESLIACPIBIOSRevision1801:bd04/24/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5N32-ESLI:rvr1.XX:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer
  glxinfo: Error: [Errno 2] No such file or directory
  system:
   distro: Ubuntu
   codename:   maverick
   architecture:   x86_64
   kernel: 2.6.35-22-generic

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-release-notes/+bug/642792/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1087981] Re: 046d:c50e LX5 cordless optical logitech mouse wrongly identified as MX1000 laser mouse

2013-08-14 Thread dino99

That mouse was working fine prior to Precise; but i cant say if it was
well identified (lx5 cordless optical) or not. What have changed then ?
(hal dropped, maybe some way to detect hardware ids, some kernel support
dropped ?) or actual kernels using some external outputs like
dmidecode/lsusb ?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1087981

Title:
  046d:c50e LX5 cordless optical logitech mouse wrongly identified as
  MX1000 laser mouse

Status in xserver-xorg-input-evdev:
  New
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  oem@oem-desktop:~$ logitech_applet
  003/002 046D/C50E M-RAG97 MX1000 Laser Mouse
 Channel 2Battery: 5Single channel   No 800cpi support   No Horiz 
Roller   No Vert Roller   2 butt.

  oem@oem-desktop:~$ dmesg | grep mouse
  [0.761534] mousedev: PS/2 mouse device common for all mice

  oem@oem-desktop:~$ dmesg | grep usb
  [0.153470] ACPI: bus type usb registered
  [0.153470] usbcore: registered new interface driver usbfs
  [0.153470] usbcore: registered new interface driver hub
  [0.153470] usbcore: registered new device driver usb
  [0.760041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  [0.760043] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
  [0.760046] usb usb1: Product: EHCI Host Controller
  [0.760048] usb usb1: Manufacturer: Linux 3.7.0-5-generic ehci_hcd
  [0.760050] usb usb1: SerialNumber: :00:1d.7
  [0.760348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  [0.760350] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
  [0.760352] usb usb2: Product: UHCI Host Controller
  [0.760354] usb usb2: Manufacturer: Linux 3.7.0-5-generic uhci_hcd
  [0.760357] usb usb2: SerialNumber: :00:1d.0
  [0.760585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  [0.760588] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
  [0.760590] usb usb3: Product: UHCI Host Controller
  [0.760592] usb usb3: Manufacturer: Linux 3.7.0-5-generic uhci_hcd
  [0.760595] usb usb3: SerialNumber: :00:1d.1
  [1.256015] usb 3-1: new low-speed USB device number 2 using uhci_hcd
  [1.430589] usb 3-1: New USB device found, idVendor=046d, idProduct=c50e
  [1.430592] usb 3-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
  [1.430594] usb 3-1: Product: USB RECEIVER
  [1.430597] usb 3-1: Manufacturer: Logitech
  [1.540191] usbcore: registered new interface driver usbhid
  [1.540193] usbhid: USB HID core driver
  [1.572331] input: Logitech USB RECEIVER as 
/devices/pci:00/:00:1d.1/usb3/3-1/3-1:1.0/input/input3
  [1.572882] hid-generic 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 
Mouse [Logitech USB RECEIVER] on usb-:00:1d.1-1/input0

  Related report:
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1006145

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.7.0-5-generic 3.7.0-5.13
  ProcVersionSignature: Ubuntu 3.7.0-5.13-generic 3.7.0-rc8
  Uname: Linux 3.7.0-5-generic i686
  ApportVersion: 2.6.3-0ubuntu4
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  oem3259 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Date: Sat Dec  8 14:29:36 2012
  HibernationDevice: RESUME=UUID=0a9ca7f0-6eeb-4b21-b70f-670fa600de16
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
   
   eth1  no wireless extensions.
  Lsusb:
   Bus 003 Device 002: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: ASUSTEK COMPUTER INC P5W DH Deluxe
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-5-generic 
root=UUID=9e61e83e-bca9-43cf-aa90-5a68892213fa ro 
crashkernel=384M-2G:64M,2G-:128M quiet
  RelatedPackageVersions:
   linux-restricted-modules-3.7.0-5-generic N/A
   linux-backports-modules-3.7.0-5-generic  N/A
   linux-firmware   1.98
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  WpaSupplicantLog:
   
  dmi.bios.date: 07/22/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 3002
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5W DH Deluxe
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version

[Kernel-packages] [Bug 688510] Re: lost swap after installing mainline kernel (requested for debugging)

tsg1zzn, as per https://wiki.ubuntu.com/Kernel/MainlineBuilds :
The mainline kernels builds are produced for debugging purposes and therefore 
come with no support. Use them at your own risk.

Thank you again for taking the time to report this bug and helping to
make Ubuntu better. Please submit any future bugs you may find.

** Changed in: linux (Ubuntu)
   Status: Confirmed = Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/688510

Title:
  lost swap after installing mainline kernel (requested for debugging)

Status in “linux” package in Ubuntu:
  Invalid

Bug description:
  After reporting Bug #681016 I was asked to install a mainline kernel
  to see if the problem was still present. This caused me to lose swap
  (swap is disabled, and swapon -a gives an error).

   sudo swapon -a
  swapon: /dev/sda7: read swap header failed: Invalid argument

  This problem persists even after uninstalling the new kernel and
  booting the old one.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.33
  Regression: Yes
  Reproducible: No
  ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
  Uname: Linux 2.6.35-22-generic x86_64
  NonfreeKernelModules: wl
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  AplayDevices:
    List of PLAYBACK Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  trond  1584 F pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xf830 irq 46'
 Mixer name : 'Realtek ALC268'
 Components : 'HDA:10ec0268,10280275,0013'
 Controls  : 12
 Simple ctrls  : 7
  Date: Fri Dec 10 11:56:52 2010
  Frequency: This has only happened once.
  HibernationDevice: RESUME=/dev/sda7
  InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release Candidate amd64 
(20100928)
  MachineType: Dell Inc. Vostro1710
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic 
root=UUID=d38e9c68-1752-4dd8-92d0-59d48e3946a0 ro quiet splash
  ProcEnviron:
   LANGUAGE=en
   PATH=(custom, user)
   LANG=en_GB.utf8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  RfKill:
   0: dell-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: linux
  WifiSyslog:
   
  dmi.bios.date: 10/09/2008
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A10
  dmi.board.name: 0X805C
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnDellInc.:bvrA10:bd10/09/2008:svnDellInc.:pnVostro1710:pvrNull:rvnDellInc.:rn0X805C:rvr:cvnDellInc.:ct8:cvrN/A:
  dmi.product.name: Vostro1710
  dmi.product.version: Null
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/688510/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1080308] Re: [Lenovo IdeaPad Y560p] Micro freezes without noapic

2013-08-14 Thread Osman Çaylak

The freezes are not appears on Maverick.

I have Raring installed on my HDD. And I have tested this kernel: 
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.11-rc5-saucy/
The freezes are not appears on this kernel without noapic. 
But I noticed a sound issue. I have tried a game named Limbo. After playing a 
few minutes sound has muted. This thing is running with Wine. 

If I see any issue, I will write here.

Thanks.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1080308

Title:
  [Lenovo IdeaPad Y560p] Micro freezes without noapic

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I have a Lenovo ideapad Y560p laptop. It is freezing always in micro
  times.

  WORKAROUND: When I add noapic nolapic on grub, theese freezes are
  disappearing. But the first CPU core always 100%.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: linux-image-3.5.0-18-generic 3.5.0-18.29
  ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7
  Uname: Linux 3.5.0-18-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  muhammed   4027 F pulseaudio
   /dev/snd/controlC0:  muhammed   4027 F pulseaudio
  Date: Sun Nov 18 12:55:52 2012
  HibernationDevice: RESUME=UUID=94297800-4e8e-442b-aa03-afe4303ce50e
  InstallationDate: Installed on 2012-07-18 (123 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
  MachineType: LENOVO IdeaPad Y560p
  MarkForUpload: True
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic 
root=UUID=40951847-faf8-47f0-906e-a43e1accfe5e ro noapic elevator=deadline
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-18-generic N/A
   linux-backports-modules-3.5.0-18-generic  N/A
   linux-firmware1.95
  SourcePackage: linux
  UpgradeStatus: Upgraded to quantal on 2012-10-18 (30 days ago)
  dmi.bios.date: 01/12/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 3FCN21WW
  dmi.board.name: KL3
  dmi.board.vendor: LENOVO
  dmi.board.version: Rev 1.0
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Rev 1.0
  dmi.modalias: 
dmi:bvnLENOVO:bvr3FCN21WW:bd01/12/2012:svnLENOVO:pnIdeaPadY560p:pvrRev1.0:rvnLENOVO:rnKL3:rvrRev1.0:cvnLENOVO:ct10:cvrRev1.0:
  dmi.product.name: IdeaPad Y560p
  dmi.product.version: Rev 1.0
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1080308/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 684654] Re: [reiserfs] system hangs due to blocked filesystem tasks

** Summary changed:

- system hangs due to blocked filesystem tasks
+ [reiserfs] system hangs due to blocked filesystem tasks

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/684654

Title:
  [reiserfs] system hangs due to blocked filesystem tasks

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Every few days, a relatively disk-intensive task such as

  find -type d -print0 | xargs -0 chmod u+s # or
  cvs up

  will cause my system to hang.  The filesystem (reiser4 on /home)
  becomes blocked, with more and more processes piling up messages like:

  Dec  2 10:20:22 helium kernel: [192960.871307] INFO: task reiserfs/1:1065 
blocked for more than 120 seconds.
  Dec  2 10:20:22 helium kernel: [192960.871316] echo 0  
/proc/sys/kernel/hung_task_timeout_secs disables this message.
  Dec  2 10:20:22 helium kernel: [192960.871322] reiserfs/1D 
880218496c30 0  1065  2 0x
  Dec  2 10:20:22 helium kernel: [192960.871333]  88022ceffd20 
0046  00015980
  Dec  2 10:20:22 helium kernel: [192960.871344]  88022cefffd8 
00015980 88022cefffd8 88021a7dadc0
  Dec  2 10:20:22 helium kernel: [192960.871354]  00015980 
00015980 88022cefffd8 00015980
  Dec  2 10:20:22 helium kernel: [192960.871362] Call Trace:
  Dec  2 10:20:22 helium kernel: [192960.871377]  [81588617] 
__mutex_lock_slowpath+0xf7/0x180
  Dec  2 10:20:22 helium kernel: [192960.871387]  [815884fb] 
mutex_lock+0x2b/0x50
  Dec  2 10:20:22 helium kernel: [192960.871420]  [a0c84c55] 
reiserfs_write_lock+0x35/0x50 [reiserfs]
  Dec  2 10:20:22 helium kernel: [192960.871444]  [a0c7ec49] 
flush_async_commits+0x39/0x80 [reiserfs]
  Dec  2 10:20:22 helium kernel: [192960.871466]  [a0c7ec10] ? 
flush_async_commits+0x0/0x80 [reiserfs]
  Dec  2 10:20:22 helium kernel: [192960.871477]  [8107a775] 
run_workqueue+0xc5/0x1a0
  Dec  2 10:20:22 helium kernel: [192960.871487]  [8107a8f3] 
worker_thread+0xa3/0x110
  Dec  2 10:20:22 helium kernel: [192960.871496]  [8107f620] ? 
autoremove_wake_function+0x0/0x40
  Dec  2 10:20:22 helium kernel: [192960.871505]  [8107a850] ? 
worker_thread+0x0/0x110
  Dec  2 10:20:22 helium kernel: [192960.871512]  [8107f0c6] 
kthread+0x96/0xa0
  Dec  2 10:20:22 helium kernel: [192960.871521]  [8100aee4] 
kernel_thread_helper+0x4/0x10
  Dec  2 10:20:22 helium kernel: [192960.871529]  [8107f030] ? 
kthread+0x0/0xa0
  Dec  2 10:20:22 helium kernel: [192960.871536]  [8100aee0] ? 
kernel_thread_helper+0x0/0x10

  Once this happens the host becomes unresponsive to console input or
  ssh connections, although it does continue to pass network traffic, at
  least for a while.  It eventually has to be force-rebooted.

  This bug is similar to #494476.  The effect of it is pretty severe,
  and I'd greatly appreciate a solution.

  Thanks,
  Andrew.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-23-generic 2.6.35-23.41
  Regression: Yes
  Reproducible: No
  ProcVersionSignature: Ubuntu 2.6.35-23.41-generic 2.6.35.7
  Uname: Linux 2.6.35-23-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: CS46xx [Sound Fusion CS46xx], device 0: CS46xx [CS46xx]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
   Card hw:0 'CS46xx'/'Sound Fusion CS46xx at 0xfdaff000/0xfd90, irq 20'
 Mixer name : 'Cirrus Logic CS4297A rev 4,Cirrus Logic CS4294 rev 5'
 Components : 'AC97a:43525914 AC97a:4352592d'
 Controls  : 71
 Simple ctrls  : 45
  Date: Fri Dec  3 05:25:49 2010
  Frequency: Once every few days.
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027)
  MachineType: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic 
root=UUID=9234eabd-576f-45d0-afee-62424eab19bc ro quiet splash nomodeset 
video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  RfKill:
   
  SourcePackage: linux
  WifiSyslog:
   Dec  3 03:26:37 helium dhclient: DHCPREQUEST of 192.168.1.2 on eth1 to 
192.168.1.1 port 67
   Dec  3 03:26:37 helium dhclient: DHCPACK of 192.168.1.2 from 192.168.1.1
   Dec  3 03:26:37 helium dhclient: bound to 192.168.1.2 -- renewal in 31801 
seconds.
   Dec  3 04:57:24 helium kernel: [44737.171753] EXT4-fs (sdb1): re-mounted. 
Opts: errors=remount-ro,acl,commit=0
   Dec  3 04:57:24 helium kernel: [44737.220796] EXT4-fs (dm-2): re-mounted. 
Opts: acl,commit=0

[Kernel-packages] [Bug 377483] Re: DVD PATA-SATA bridge (SPiF223A) doesn't work...

Regressor, could you please confirm this issue exists with the latest
development release of Ubuntu? ISO images are available from
http://cdimage.ubuntu.com/daily-live/current/ . If the issue remains,
could you please run the following command in the development release
from a Terminal (Applications-Accessories-Terminal), as it will
automatically gather and attach updated debug information to this
report:

apport-collect -p linux replace-with-bug-number

Also, could you please test the latest upstream kernel available following 
https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional 
upstream developers to examine the issue. Please do not test the daily folder, 
but the one all the way at the bottom. Once you've tested the upstream kernel, 
please comment on which kernel version specifically you tested. If this bug is 
fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For 
example:
kernel-fixed-upstream-v3.11-rc5

This can be done by clicking on the yellow circle with a black pencil icon next 
to the word Tags located at the bottom of the bug description. As well, please 
remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why 
specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Tags added: gutsy jaunty

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/377483

Title:
  DVD PATA-SATA bridge (SPiF223A) doesn't work...

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  DVD drive connected using JAE50 PATA-SATA adapter doesn't work.
  Motherboard - Zotac 610i (nvidia nForce 610i), DVD drive - HP TS-L16C
  (I tried also another drives - they doesn't work too). Under windows
  this drive works fine. PATA-SATA adapter is based on Satalink SPiF223A
  chip.

  I tried to boot using acpi=off, noapic, pci=nomsi options but no
  success. Also I tried to boot ubuntu dvd but failed during kernel
  startup. Also I tried kernel from Ubuntu 9.04 (2.6.28) but it failed
  to attach DVD too.

  ProblemType: Bug
  Architecture: i386
  DistroRelease: Ubuntu 8.10
  Package: linux-image-2.6.27-11-generic 2.6.27-11.31
  ProcCmdLine: User Name=/dev/sda1 ro
  ProcEnviron:
   LANGUAGE=
   PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
   LANG=ru_RU.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.27-11.31-generic
  SourcePackage: linux

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/377483/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1040943] Re: Wireless -very- frequent disconnects in LinuxMint13 - Atheros AR9462

2013-08-14 Thread GreyGeek

I have been running Kubuntu 12.04 since its release and this problem has 
plauged my installation on my Acer Aspire V3-771G laptop.  It does not appear 
to be load related.
I am running the 3.8.0-27-generic kernel.  I have tried the 3.2 and 3.5 
kernels. 
The problem affects my  wireless chip, AR9462, AND it also affects my ethernet 
chip, AR8151.   
The disconnect/reconnect is random.  Sometimes the reconnect is almost 
instantly, sometimes almost a minute can go by.
I have tried WICD but the problem persisted, so I went back to the 
plasma-network-manager.
I have played with settings of the ath9k PARMS vars.   No joy.
The atl1c module has no PARMS to set.
The Win7 side runs both wireless and cable just fine.

Oh, if I use suspend then the network-manager doesn't re-enable.  I have
to change the managed=false to managed=true in the ifupdown section
of  /etc/NetworkManager/NetworkMagager.conf to re-enable the plasma-
network-manager's ability to join and manage networks.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1040943

Title:
  Wireless -very- frequent disconnects in LinuxMint13 - Atheros AR9462

Status in The Linux Mint Distribution:
  New
Status in “linux” package in Ubuntu:
  Invalid
Status in Debian GNU/Linux:
  New

Bug description:
  Wireless Connection disconnects very frequently, almost about every 15 
minutes.
  In some cases (more often) the network manager indicate tha i am connected, 
in other cases clearly disconnects and occasionaly cannot connect (like i have 
disabled the wireless) an i restart the hardware (wireless card button) to 
start again.

  My system is Aspire One 765 with Linux Mint 13 kde.
  My wireless card is Atheros AR9462.

  - Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
  -iwconfig:
  wlan0 IEEE 802.11abgn  ESSID:**  
Mode:Managed  Frequency:2.437 GHz  Access Point: * 
Bit Rate=54 Mb/s   Tx-Power=19 dBm   
Retry  long limit:7   RTS thr:off   Fragment thr:off
Power Management:on
Link Quality=57/70  Signal level=-53 dBm  
Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
Tx excessive retries:20152  Invalid misc:4984   Missed beacon:0

  -inxi -N:
  Atheros AR9462 Wireless Network Adapter driver: ath9k

  I've tried as been sugested by some forum threads to run the nohwcrypt option:
  sudo modprobe -v ath9k nohwcrypt=1
  and to make a file in /etc/modprobe.d/ath9k.conf with options ath9k 
nohwcrypt 
  but... nothing.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linuxmint/+bug/1040943/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212199] Re: Network not working after resume from suspend (r8169)

Anca Emanuel, could you please provide the full computer model as noted
on the sticker?

** Tags added: needs-full-computer-modl

** Tags removed: needs-full-computer-modl
** Tags added: needs-full-computer-model needs-upstream-testing 
regression-potential

** Tags added: needs-suspend-log resume suspend

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212199

Title:
  Network not working after resume from suspend (r8169)

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  http://www.webupd8.org/2013/01/fix-wireless-or-wired-network-not.html
  workaround not working

  related ? info:
  
https://github.com/torvalds/linux/commit/2a15cd2ff488a9fdb55e5e34060f499853b27c77

  I am running Ubuntu 13.10 with the latest updates

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-2-generic 3.11.0-2.5
  ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
  Uname: Linux 3.11.0-2-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emanuel1634 F pulseaudio
  CurrentDmesg: [   18.315564] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link 
becomes ready
  Date: Wed Aug 14 13:42:10 2013
  HibernationDevice: RESUME=UUID=c295bea4-fefe-4d3b-8f12-ee5b580946db
  InstallationDate: Installed on 2013-05-02 (103 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130502)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=86fe6e26-730a-49ee-9ef7-096ce5dedeb0 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-2-generic N/A
   linux-backports-modules-3.11.0-2-generic  N/A
   linux-firmware1.113
  RfKill:
   
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/11/2008
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V1.10
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: MS-7360
  dmi.board.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV1.10:bd11/11/2008:svnMICRO-STARINTERNATIONALCO.,LTD:pnMS-7360:pvr1.0:rvnMICRO-STARINTERNATIONALCO.,LTD:rnMS-7360:rvr1.0:cvnMICRO-STARINTERNATIONALCO.,LTD:ct3:cvr1.0:
  dmi.product.name: MS-7360
  dmi.product.version: 1.0
  dmi.sys.vendor: MICRO-STAR INTERNATIONAL CO.,LTD

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212199/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212169] Re: Shutdown triggers standby on lenovo x230 with lid closed on docking station

2013-08-14 Thread James Page

The lid is already closed - I'm shutting down using an external monitor.

** Changed in: linux (Ubuntu)
   Status: Invalid = New

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212169

Title:
  Shutdown triggers standby on lenovo x230 with lid closed on docking
  station

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  I generally use my x230 attached to a docking station + external
  monitor etc.

  Using the restart or shutdown options from with Ubuntu results in the
  laptop going into standby mode if the lid of the laptop is closed.

  Opening the lid wakes up OK at which point the requested action does
  complete.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-1-generic 3.11.0-1.4
  ProcVersionSignature: Ubuntu 3.11.0-1.4-generic 3.11.0-rc4
  Uname: Linux 3.11.0-1-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jamespage   2944 F pulseaudio
   /dev/snd/controlC0:  jamespage   2944 F pulseaudio
  Date: Wed Aug 14 10:26:17 2013
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=9cabca8b-d2e3-4f65-a113-3c165c5ecbc6
  InstallationDate: Installed on 2013-04-23 (112 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130423)
  MachineType: LENOVO 2324CTO
  MarkForUpload: True
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-1-generic.efi.signed 
root=UUID=88b94abf-33eb-4e05-888d-9dacbe025054 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-1-generic N/A
   linux-backports-modules-3.11.0-1-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-06-15 (59 days ago)
  dmi.bios.date: 01/14/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G2ET91WW (2.51 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 2324CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG2ET91WW(2.51):bd01/14/2013:svnLENOVO:pn2324CTO:pvrThinkPadX230:rvnLENOVO:rn2324CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 2324CTO
  dmi.product.version: ThinkPad X230
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212169/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212224] Status changed to Confirmed

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212224

Title:
  system freezes

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  I get freezes in different situations, this time it was when I clicked
  on a link in chromium. The whole computer froze, even the fan and all
  the lights, (I tried to toggle caps lock without success). I had to
  force shut down via the power button.

  the computer is an Asus 1201n laptop. With an extra 4 Gb of RAM.

  What I could see from the system-indicator app was that the RAM was
  all green, so all RAM was cached/used at the moment.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1
  ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16
  Uname: Linux 3.5.0-37-generic x86_64
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25.
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: NVidia [HDA NVidia], device 0: ALC269 Analog [ALC269 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  alvar  2034 F pulseaudio
   /dev/snd/pcmC0D0p:   alvar  2034 F...m pulseaudio
  Card0.Amixer.info:
   Card hw:0 'NVidia'/'HDA NVidia at 0xf9f78000 irq 22'
 Mixer name : 'Nvidia MCP79/7A HDMI'
 Components : 'HDA:10ec0269,104383ce,0014 
HDA:10de0007,10de0101,00100100'
 Controls  : 24
 Simple ctrls  : 11
  Date: Wed Aug 14 14:07:40 2013
  HibernationDevice: RESUME=UUID=48728a7e-5708-4a8d-918e-9dae7b837563
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release amd64 
(20130213)
  MachineType: ASUSTeK Computer INC. 1201N
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic 
hostname=UUID=a2e0db93-a211-4740-b53e-81fa4039592f ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.5.0-37-generic N/A
   linux-backports-modules-3.5.0-37-generic  N/A
   linux-firmware1.79.6
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/17/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 0325
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: 1201N
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: x.xx
  dmi.chassis.asset.tag: 0x
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK Computer INC.
  dmi.chassis.version: x.x
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0325:bd03/17/2010:svnASUSTeKComputerINC.:pn1201N:pvrx.x:rvnASUSTeKComputerINC.:rn1201N:rvrx.xx:cvnASUSTeKComputerINC.:ct10:cvrx.x:
  dmi.product.name: 1201N
  dmi.product.version: x.x
  dmi.sys.vendor: ASUSTeK Computer INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212224/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1062077] Re: [HP TouchSmart tm2-2010eg] Linux hangs with: [drm:atom_op_jump] ERROR atombios stuck in loop for more than 5secs aborting

2013-08-14 Thread Simon K

So after finding an Windows image and flashing my Bios to F.25 the
problem is still the there.

What happened:
I installed WinVista, flashed my BIOS (The Insyde-Setup sayed: old ID: 1486, 
old Version: F.12 - new ID: 1486, new Version: F.25)
After finishing the setup my PC shutdown. The power seemed to be disconnected 
abruptly (like when I disconnect my power-cable and there is no battery while 
the notebook is running)

After that I started my notebook, the BIOS seems to sometimes not register my 
keys (i.e. I can't open some pages from others, where I could before).
Ubuntu didn't show anything on the build in screen. I plugged in an external 
screen, started Ubuntu and switched, via tty1, the graphicscard to Intel only 
(IGD).
At this point I started Ubuntu in the Recovery Mode (via Grub) and activated 
Xorg failsafe. It did however hang a huge time without starting any X. So I 
rebooted.
After a new restart I could change my brightness with my FN-keys again (my 
Notebook starts with a blank screen every time, I have to higher the brightness 
then).


octavian-tm2:~$ sudo dmidecode -s bios-version  sudo dmidecode -s 
bios-release-date
[sudo] password for octavian: 
F.25
02/18/2011

I hope the important informations where mentioned by me.

PS: I've tested a few times, subjectively I would say that it got better
(it hangs for a shorter time period), this however needs more testing to
be sure.

** Tags removed: bios-outdated-f.25

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1062077

Title:
  [HP TouchSmart tm2-2010eg] Linux hangs with: [drm:atom_op_jump]
  *ERROR* atombios stuck in loop for more than 5secs aborting

Status in The Linux Kernel:
  New
Status in “linux” package in Ubuntu:
  Incomplete
Status in “xserver-xorg-video-ati” package in Ubuntu:
  Confirmed

Bug description:
  Symptom: Linux isn't displaying changes after switching to tty1 and
  back to unity

  Steps to reproduce:
  1. Starting up to Unity
  2. Switch to tty1 (Strg + Alt + F1)
  3. Switching back to Unity

  or:
  Resuming the system from suspend leads to the same isssue.This method isn't 
as reliable as the method stated above

  What happens:
  The screen freezes. Magic Keys [Alt + Print + S/U/B] are working thou (so 
linux-kernel is responding?!) I can't switch to tty1 either. The system becomes 
responding again after ~2min. Switching VTs is possible afterwards but leads to 
the same bug again.

  What is expected:
  Showing up a responding Unity.

  Interesting Sitenote:
  My radeon is switched off using: 
echoOFF/sys/kernel/debug/vgaswitcheroo/switch
  By turning ON the graphiccard the above stated problem doesn't appear.

  A short extract of kern.log (full one is attached):
  Oct  5 09:06:06 Octavian-Notebook kernel: [  186.691685] [drm:atom_op_jump] 
*ERROR* atombios stuck in loop for more than 5secs aborting
  Oct  5 09:06:06 Octavian-Notebook kernel: [  186.691700] 
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing C98E (len 62, 
WS 0, PS 0) @ 0xC9AA
  Oct  5 09:06:11 Octavian-Notebook kernel: [  191.692930] [drm:atom_op_jump] 
*ERROR* atombios stuck in loop for more than 5secs aborting
  Oct  5 09:06:11 Octavian-Notebook kernel: [  191.692949] 
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing C98E (len 62, 
WS 0, PS 0) @ 0xC9AA
  Oct  5 09:06:11 Octavian-Notebook kernel: [  191.692960] 
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing C040 (len 861, 
WS 0, PS 0) @ 0xC09D
  Oct  5 09:06:16 Octavian-Notebook kernel: [  197.021996] [drm:atom_op_jump] 
*ERROR* atombios stuck in loop for more than 5secs aborting
  Oct  5 09:06:16 Octavian-Notebook kernel: [  197.022011] 
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing CE0C (len 72, 
WS 0, PS 0) @ 0xCE3B
  Oct  5 09:06:22 Octavian-Notebook kernel: [  202.223115] [drm:atom_op_jump] 
*ERROR* atombios stuck in loop for more than 5secs aborting
  Oct  5 09:06:22 Octavian-Notebook kernel: [  202.223134] 
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing C98E (len 62, 
WS 0, PS 0) @ 0xC9AA
  Oct  5 09:06:27 Octavian-Notebook kernel: [  207.424244] [drm:atom_op_jump] 
*ERROR* atombios stuck in loop for more than 5secs aborting
  Oct  5 09:06:27 Octavian-Notebook kernel: [  207.424259] 
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing C98E (len 62, 
WS 0, PS 0) @ 0xC9AA
  Oct  5 09:06:32 Octavian-Notebook kernel: [  212.625368] [drm:atom_op_jump] 
*ERROR* atombios stuck in loop for more than 5secs aborting
  Oct  5 09:06:32 Octavian-Notebook kernel: [  212.625387] 
[drm:atom_execute_table_locked] *ERROR* atombios stuck executing C98E (len 62, 
WS 0, PS 0) @ 0xC9AA
  Oct  5 09:06:37 Octavian-Notebook kernel: [  217.826526] [drm:atom_op_jump] 
*ERROR* atombios stuck in loop for more than 5secs aborting
  Oct  5 09:06:37 Octavian-Notebook kernel: [  217.826545]

[Kernel-packages] [Bug 1212199] Re: Network not working after resume from suspend (r8169)

needs-upstream-testing: I'm allready running:
emanuel@test:~$ cat /proc/version_signature
Ubuntu 3.11.0-2.5-generic 3.11.0-rc5

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212199

Title:
  Network not working after resume from suspend (r8169)

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  http://www.webupd8.org/2013/01/fix-wireless-or-wired-network-not.html
  workaround not working

  related ? info:
  
https://github.com/torvalds/linux/commit/2a15cd2ff488a9fdb55e5e34060f499853b27c77

  I am running Ubuntu 13.10 with the latest updates

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-2-generic 3.11.0-2.5
  ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
  Uname: Linux 3.11.0-2-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emanuel1634 F pulseaudio
  CurrentDmesg: [   18.315564] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link 
becomes ready
  Date: Wed Aug 14 13:42:10 2013
  HibernationDevice: RESUME=UUID=c295bea4-fefe-4d3b-8f12-ee5b580946db
  InstallationDate: Installed on 2013-05-02 (103 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130502)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=86fe6e26-730a-49ee-9ef7-096ce5dedeb0 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-2-generic N/A
   linux-backports-modules-3.11.0-2-generic  N/A
   linux-firmware1.113
  RfKill:
   
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/11/2008
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V1.10
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: MS-7360
  dmi.board.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV1.10:bd11/11/2008:svnMICRO-STARINTERNATIONALCO.,LTD:pnMS-7360:pvr1.0:rvnMICRO-STARINTERNATIONALCO.,LTD:rnMS-7360:rvr1.0:cvnMICRO-STARINTERNATIONALCO.,LTD:ct3:cvr1.0:
  dmi.product.name: MS-7360
  dmi.product.version: 1.0
  dmi.sys.vendor: MICRO-STAR INTERNATIONAL CO.,LTD

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212199/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212245] [NEW] external USB drive takes minutes to be recognized

2013-08-14 Thread svenmeier

Public bug reported:

After plugging in my Toshiba USB drive, it takes several minutes for
Ubuntu to recognize and mount the new device, see attached syslog
output.

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-28-generic 3.8.0-28.41
ProcVersionSignature: Ubuntu 3.8.0-28.41-generic 3.8.13.5
Uname: Linux 3.8.0-28-generic x86_64
ApportVersion: 2.9.2-0ubuntu8.3
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  sven   2002 F pulseaudio
CRDA:
 country DE:
(2400 - 2483 @ 40), (N/A, 20)
(5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
(5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS
(5470 - 5725 @ 40), (N/A, 26), DFS
Date: Wed Aug 14 15:00:16 2013
HibernationDevice: RESUME=UUID=6534b94d-55a6-4c0e-b91b-305dfe1b747d
InstallationDate: Installed on 2012-07-14 (396 days ago)
InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X4C/900X4D
MarkForUpload: True
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcFB:
 0 inteldrmfb
 1 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-28-generic 
root=UUID=bd43fd42-69f9-4a3b-abb1-9c9865501acc ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.8.0-28-generic N/A
 linux-backports-modules-3.8.0-28-generic  N/A
 linux-firmware1.106
SourcePackage: linux
UpgradeStatus: Upgraded to raring on 2013-04-05 (130 days ago)
dmi.bios.date: 04/03/2012
dmi.bios.vendor: Phoenix Technologies Ltd.
dmi.bios.version: P00AAC
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: SAMSUNG_NP1234567890
dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.board.version: FAB1
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 9
dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.chassis.version: 0.1
dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrP00AAC:bd04/03/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn900X3C/900X4C/900X4D:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
dmi.product.name: 900X3C/900X4C/900X4D
dmi.product.version: 0.1
dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug package-from-proposed raring third-party-packages

** Attachment added: usb-device-syslog
   
https://bugs.launchpad.net/bugs/1212245/+attachment/3772393/+files/usb-device-syslog

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212245

Title:
  external USB drive takes minutes to be recognized

Status in “linux” package in Ubuntu:
  New

Bug description:
  After plugging in my Toshiba USB drive, it takes several minutes for
  Ubuntu to recognize and mount the new device, see attached syslog
  output.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-28-generic 3.8.0-28.41
  ProcVersionSignature: Ubuntu 3.8.0-28.41-generic 3.8.13.5
  Uname: Linux 3.8.0-28-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sven   2002 F pulseaudio
  CRDA:
   country DE:
(2400 - 2483 @ 40), (N/A, 20)
(5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
(5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS
(5470 - 5725 @ 40), (N/A, 26), DFS
  Date: Wed Aug 14 15:00:16 2013
  HibernationDevice: RESUME=UUID=6534b94d-55a6-4c0e-b91b-305dfe1b747d
  InstallationDate: Installed on 2012-07-14 (396 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X4C/900X4D
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB:
   0 inteldrmfb
   1 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-28-generic 
root=UUID=bd43fd42-69f9-4a3b-abb1-9c9865501acc ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-28-generic N/A
   linux-backports-modules-3.8.0-28-generic  N/A
   linux-firmware1.106
  SourcePackage: linux
  UpgradeStatus: Upgraded to raring on 2013-04-05 (130 days ago)
  dmi.bios.date: 04/03/2012
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: P00AAC
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: SAMSUNG_NP1234567890
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: 0.1
  dmi.modalias:

[Kernel-packages] [Bug 1075046] Re: [Dell Latitude E6430] FunctionKeys of brightness don't work

2013-08-14 Thread Anthony Wong

** Changed in: linux (Ubuntu)
 Assignee: Anthony Wong (anthonywong) = Canonical Hardware Certification 
(canonical-hw-cert)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1075046

Title:
  [Dell Latitude E6430] FunctionKeys of brightness don't work

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  cid:  201202-10552
  it doesn't work whenever pressing the brightness-up button or brightness-down 
button.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-29-generic 3.2.0-29.46
  ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24
  Uname: Linux 3.2.0-29-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu12
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ubuntu 1551 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xf7e3 irq 46'
 Mixer name : 'Intel PantherPoint HDMI'
 Components : 'HDA:111d76df,10280534,00100203 
HDA:14f12c06,14f1000f,0010 HDA:80862806,80860101,0010'
 Controls  : 37
 Simple ctrls  : 13
  Date: Mon Nov  5 00:53:58 2012
  HibernationDevice: RESUME=UUID=a7126f65-e66f-4eb5-9d0f-df7f738cf5f2
  InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 
(20120823.1)
  MachineType: Dell Inc. Latitude E6430
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic 
root=UUID=2bef066c-fb96-4702-b08d-4c7ae7c437fe ro quiet splash initcall_debug 
vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-29-generic N/A
   linux-backports-modules-3.2.0-29-generic  N/A
   linux-firmware1.79
  SourcePackage: linux
  StagingDrivers: mei
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/19/2012
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A06
  dmi.board.name: 0CPWYR
  dmi.board.vendor: Dell Inc.
  dmi.board.version: X03
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA06:bd09/19/2012:svnDellInc.:pnLatitudeE6430:pvr01:rvnDellInc.:rn0CPWYR:rvrX03:cvnDellInc.:ct9:cvr:
  dmi.product.name: Latitude E6430
  dmi.product.version: 01
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1075046/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] ProcCpuinfo.txt

apport information

** Attachment added: ProcCpuinfo.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772417/+files/ProcCpuinfo.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] Re: display configuration isn't saved

apport information

** Tags added: apport-collected raring

** Description changed:

  Binary package hint: gnome-control-center
  
  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04
  
  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
+ --- 
+ ApportVersion: 2.9.2-0ubuntu8.3
+ Architecture: amd64
+ AudioDevicesInUse:
+  USERPID ACCESS COMMAND
+  /dev/snd/controlC0:  omri   2380 F pulseaudio
+ DistroRelease: Ubuntu 13.04
+ HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
+ InstallationDate: Installed on 2013-06-01 (74 days ago)
+ InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
+ MachineType: LENOVO 3443CTO
+ MarkForUpload: True
+ Package: linux (not installed)
+ ProcEnviron:
+  TERM=xterm
+  PATH=(custom, no user)
+  XDG_RUNTIME_DIR=set
+  LANG=en_US.UTF-8
+  SHELL=/bin/bash
+ ProcFB: 0 inteldrmfb
+ ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
+ RelatedPackageVersions:
+  linux-restricted-modules-3.8.0-27-generic N/A
+  linux-backports-modules-3.8.0-27-generic  N/A
+  linux-firmware1.106
+ Tags:  raring
+ Uname: Linux 3.8.0-27-generic x86_64
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
+ WifiSyslog:
+  
+ dmi.bios.date: 04/29/2013
+ dmi.bios.vendor: LENOVO
+ dmi.bios.version: G6ET96WW (2.56 )
+ dmi.board.asset.tag: Not Available
+ dmi.board.name: 3443CTO
+ dmi.board.vendor: LENOVO
+ dmi.board.version: Win8 Pro DPK TPG
+ dmi.chassis.asset.tag: No Asset Information
+ dmi.chassis.type: 10
+ dmi.chassis.vendor: LENOVO
+ dmi.chassis.version: Not Available
+ dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
+ dmi.product.name: 3443CTO
+ dmi.product.version: ThinkPad X1 Carbon
+ dmi.sys.vendor: LENOVO

** Attachment added: AlsaInfo.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772409/+files/AlsaInfo.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

[Kernel-packages] [Bug 566683] RfKill.txt

apport information

** Attachment added: RfKill.txt
   https://bugs.launchpad.net/bugs/566683/+attachment/3772421/+files/RfKill.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] CurrentDmesg.txt

apport information

** Attachment added: CurrentDmesg.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772412/+files/CurrentDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] HookError_cloud_archive.txt

apport information

** Attachment added: HookError_cloud_archive.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772413/+files/HookError_cloud_archive.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] Lsusb.txt

apport information

** Attachment added: Lsusb.txt
   https://bugs.launchpad.net/bugs/566683/+attachment/3772416/+files/Lsusb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] ProcModules.txt

apport information

** Attachment added: ProcModules.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772419/+files/ProcModules.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] BootDmesg.txt

apport information

** Attachment added: BootDmesg.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772410/+files/BootDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] Lspci.txt

apport information

** Attachment added: Lspci.txt
   https://bugs.launchpad.net/bugs/566683/+attachment/3772415/+files/Lspci.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] ProcInterrupts.txt

apport information

** Attachment added: ProcInterrupts.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772418/+files/ProcInterrupts.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] IwConfig.txt

apport information

** Attachment added: IwConfig.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772414/+files/IwConfig.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] Re: display configuration isn't saved

Please ignore, I actually am using a different laptop now and don't have
this problem anymore. Bug can be closed.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] PulseList.txt

apport information

** Attachment added: PulseList.txt
   
https://bugs.launchpad.net/bugs/566683/+attachment/3772420/+files/PulseList.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] UdevDb.txt

apport information

** Attachment added: UdevDb.txt
   https://bugs.launchpad.net/bugs/566683/+attachment/3772422/+files/UdevDb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] UdevLog.txt

apport information

** Attachment added: UdevLog.txt
   https://bugs.launchpad.net/bugs/566683/+attachment/3772423/+files/UdevLog.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 566683] CRDA.txt

apport information

** Attachment added: CRDA.txt
   https://bugs.launchpad.net/bugs/566683/+attachment/3772411/+files/CRDA.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/566683

Title:
  display configuration isn't saved

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: gnome-control-center

  I am running Ubuntu 10.04 on an eee-pc 1002HA.
  In Jaunty I would connect an external screen and turn off the built in 
screen. Once I did this the config was saved and everytime I connected the 
external screen, my built in would shut off automatically.
  After upgrading, the built in screen always turn on. This causes compiz to 
crash (since it can't work with resolutions above 2048x2048). I can lower the 
resolution of the built in screen and then turn on compiz and then disable the 
built in screen.
  Any changes (open the Monitors configuration utility, locking the screen, 
screen turns off after inactivity) defaults all the settings which results with 
the built in screen turning on, compiz crashes and the resolutions go back to 
default.
  If I change the layout of the monitors (top-bottom instead of side by side) I 
can run compiz but inactivity/locking the screen immediately defaults the 
configuration and compiz crashes.
  The behavior in Jaunty was the correct one.
  Description:  Ubuntu lucid (development branch)
  Release:  10.04

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Mon Apr 19 10:25:15 2010
  ExecutablePath: /usr/bin/gnome-display-properties
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  --- 
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  omri   2380 F pulseaudio
  DistroRelease: Ubuntu 13.04
  HibernationDevice: RESUME=UUID=e323bb43-47fb-472f-961e-eb6ef307cf9c
  InstallationDate: Installed on 2013-06-01 (74 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 3443CTO
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-27-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-27-generic N/A
   linux-backports-modules-3.8.0-27-generic  N/A
   linux-firmware1.106
  Tags:  raring
  Uname: Linux 3.8.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog:
   
  dmi.bios.date: 04/29/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G6ET96WW (2.56 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 3443CTO
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 3443CTO
  dmi.product.version: ThinkPad X1 Carbon
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566683/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212245] Status changed to Confirmed

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212245

Title:
  external USB drive takes minutes to be recognized

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  After plugging in my Toshiba USB drive, it takes several minutes for
  Ubuntu to recognize and mount the new device, see attached syslog
  output.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: linux-image-3.8.0-28-generic 3.8.0-28.41
  ProcVersionSignature: Ubuntu 3.8.0-28.41-generic 3.8.13.5
  Uname: Linux 3.8.0-28-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sven   2002 F pulseaudio
  CRDA:
   country DE:
(2400 - 2483 @ 40), (N/A, 20)
(5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
(5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS
(5470 - 5725 @ 40), (N/A, 26), DFS
  Date: Wed Aug 14 15:00:16 2013
  HibernationDevice: RESUME=UUID=6534b94d-55a6-4c0e-b91b-305dfe1b747d
  InstallationDate: Installed on 2012-07-14 (396 days ago)
  InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120425)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X4C/900X4D
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB:
   0 inteldrmfb
   1 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-28-generic 
root=UUID=bd43fd42-69f9-4a3b-abb1-9c9865501acc ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.8.0-28-generic N/A
   linux-backports-modules-3.8.0-28-generic  N/A
   linux-firmware1.106
  SourcePackage: linux
  UpgradeStatus: Upgraded to raring on 2013-04-05 (130 days ago)
  dmi.bios.date: 04/03/2012
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: P00AAC
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: SAMSUNG_NP1234567890
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrP00AAC:bd04/03/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn900X3C/900X4C/900X4D:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
  dmi.product.name: 900X3C/900X4C/900X4D
  dmi.product.version: 0.1
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212245/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 659837] Re: Sierra mobile bradband does not wake from usb auto-suspend

2013-08-14 Thread Peter Sasi

Sorry, I no longer use that Laptop, neither Ubuntu.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/659837

Title:
  Sierra mobile bradband does not wake from usb auto-suspend

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I am using NetworkManager (and ModemManager under it) in 10.10
  Maverick (the issue was also present on 10.04 Lucid as well, before I
  upgraded) on my Lenovo Thinkpad T61, kernel 2.6.35-22-generic.

  I started setting power/level to auto using udev for power saving due
  to usb auto suspend.

  Connecting to moble broadband fails if /sys/bus/usb/devices/6-1/power/level 
contains auto and the device has suspended.
  It succeeds, if it is set to on.

  I can connect with power/level set to auto only if I am fast enough
  and Disable then Enable Mobile Broadband in NetworkManager in quick
  succession, before the device has time to suspend.

  Seems like NetworkManager / Kernel cannot get sierra module out of
  suspend using ttyUSBx.

  Logs according to NetworkManager / ModemManager bug reporting protocol
  are also attached.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image-2.6.35-22-generic 2.6.35-22.33
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-22.33~phc0-generic-phc 2.6.35.4
  Uname: Linux 2.6.35-22-generic-phc x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sape   1847 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfe22 irq 49'
 Mixer name : 'Analog Devices AD1984'
 Components : 'HDA:11d41984,17aa20bb,00100400'
 Controls  : 31
 Simple ctrls  : 19
  Card29.Amixer.info:
   Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 
7KHT24WW-1.08'
 Mixer name : 'ThinkPad EC 7KHT24WW-1.08'
 Components : ''
 Controls  : 1
 Simple ctrls  : 1
  Card29.Amixer.values:
   Simple mixer control 'Console',0
 Capabilities: pswitch pswitch-joined penum
 Playback channels: Mono
 Mono: Playback [on]
  Date: Wed Oct 13 13:08:27 2010
  HibernationDevice: RESUME=UUID=ac20c706-49b8-4afa-a907-2c79ff5196e1
  InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027)
  MachineType: LENOVO 6460EDG
  PccardctlIdent:
   Socket 0:
 no product info available
  PccardctlStatus:
   Socket 0:
 no card
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic-phc 
root=UUID=9a7f4375-8f6b-43f7-aaf8-af5f7a179988 ro 
crashkernel=384M-2G:64M,2G-:128M quiet splash
  ProcEnviron:
   LANGUAGE=hu_HU:hu:en_GB:en
   LANG=hu_HU.UTF-8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38
  SourcePackage: linux
  dmi.bios.date: 11/14/2008
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 7LETC5WW (2.25 )
  dmi.board.name: 6460EDG
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr7LETC5WW(2.25):bd11/14/2008:svnLENOVO:pn6460EDG:pvrThinkPadT61:rvnLENOVO:rn6460EDG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 6460EDG
  dmi.product.version: ThinkPad T61
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/659837/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Kernel-packages] [Bug 1036078] Re: Wireless USB keyboard stopped working after upgrade to 12.04

2013-08-14 Thread mikwit

Dear Christopher,

frankly it is working fine on Raring.
Thanks anyway and sorry for not reporting it.

Regards
Mikolaj

W dniu 12.08.2013 04:51, Christopher M. Penalver pisze:
 mikwit, as per
 http://www.asus.com/Notebooks_Ultrabooks/N76VM/#support_Download_8 an
 update is available for your BIOS (215). If you update to this, does it
 change anything?

 If not, could you please both specify what happened, and provide the output 
 of the following terminal command:
 sudo dmidecode -s bios-version  sudo dmidecode -s bios-release-date

 Thank you for your understanding.

 ** Tags added: bios-outdated-215 needs-upstream-testing

 ** Changed in: linux (Ubuntu)
 Status: Confirmed = Incomplete


-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1036078

Title:
  Wireless USB keyboard stopped working after upgrade to 12.04

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  My wireless keyboard stopped responding after upgrade to 12.04 LTS
  It is connected with usb dongle - Logitech unifying receiver.
  Unplugging/ plugging again doesnt work.
  Keyboard works fine on other computers.

  Dmesg:
  [  767.170476] usb 3-4: new full-speed USB device number 7 using xhci_hcd
  [  767.192283] logitech-djreceiver 0003:046D:C52B.0012: hiddev0,hidraw3: USB 
HID v1.11 Device [Logitech USB Receiver] on usb-:00:14.0-4/input2
  [  767.192554] logitech-djreceiver 0003:046D:C52B.0012: 
logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
  [  767.192784] logitech-djreceiver: probe of 0003:046D:C52B.0012 failed with 
error -32
  --- 
  ApportVersion: 2.0.1-0ubuntu12
  Architecture: i386
  DistroRelease: Ubuntu 12.04
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   LANG=pl_PL.UTF-8
   SHELL=/bin/bash
  Tags:  precise
  Uname: Linux 3.4.0-030400-generic-pae i686
  UnreportableReason: The running kernel is not an Ubuntu kernel
  UpgradeStatus: Upgraded to precise on 2012-05-08 (96 days ago)
  UserGroups:
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu12
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: PCH [HDA Intel PCH], device 0: ALC663 Analog [ALC663 Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  mikolaj2239 F pulseaudio
   /dev/snd/seq:timidity   1728 F timidity
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xf7a1 irq 48'
 Mixer name : 'Realtek ALC663'
 Components : 'HDA:10ec0663,10431bf3,0012'
 Controls  : 24
 Simple ctrls  : 13
  DistroRelease: Ubuntu 12.04
  InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1)
  MachineType: ASUSTeK COMPUTER INC. N76VM
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   LANG=pl_PL.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic-pae 
root=UUID=cd83fccb-d1ac-4d8d-af96-e55607bd32cc ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.2.0-29.46-generic-pae 3.2.24
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-29-generic-pae N/A
   linux-backports-modules-3.2.0-29-generic-pae  N/A
   linux-firmware1.79
  StagingDrivers: mei
  Tags:  precise staging
  Uname: Linux 3.2.0-29-generic-pae i686
  UpgradeStatus: Upgraded to precise on 2012-05-08 (96 days ago)
  UserGroups:
   
  dmi.bios.date: 04/02/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: N76VM.207
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: N76VM
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrN76VM.207:bd04/02/2012:svnASUSTeKCOMPUTERINC.:pnN76VM:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN76VM:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: N76VM
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1036078/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212199] Re: Network not working after resume from suspend (r8169)

The log at comment #4 was with workaround from 
http://www.webupd8.org/2013/01/fix-wireless-or-wired-network-not.html
i.e.: sudo gedit /etc/pm/config.d/unload_modules
add line: SUSPEND_MODULES=$SUSPEND_MODULES r8169

Now: the log whout that

** Attachment added: log after resume from suspend (original behavior)
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212199/+attachment/3772426/+files/dmesg1.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212199

Title:
  Network not working after resume from suspend (r8169)

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  http://www.webupd8.org/2013/01/fix-wireless-or-wired-network-not.html
  workaround not working

  related ? info:
  
https://github.com/torvalds/linux/commit/2a15cd2ff488a9fdb55e5e34060f499853b27c77

  I am running Ubuntu 13.10 with the latest updates

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-2-generic 3.11.0-2.5
  ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
  Uname: Linux 3.11.0-2-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emanuel1634 F pulseaudio
  CurrentDmesg: [   18.315564] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link 
becomes ready
  Date: Wed Aug 14 13:42:10 2013
  HibernationDevice: RESUME=UUID=c295bea4-fefe-4d3b-8f12-ee5b580946db
  InstallationDate: Installed on 2013-05-02 (103 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130502)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=86fe6e26-730a-49ee-9ef7-096ce5dedeb0 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-2-generic N/A
   linux-backports-modules-3.11.0-2-generic  N/A
   linux-firmware1.113
  RfKill:
   
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/11/2008
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V1.10
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: MS-7360
  dmi.board.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV1.10:bd11/11/2008:svnMICRO-STARINTERNATIONALCO.,LTD:pnMS-7360:pvr1.0:rvnMICRO-STARINTERNATIONALCO.,LTD:rnMS-7360:rvr1.0:cvnMICRO-STARINTERNATIONALCO.,LTD:ct3:cvr1.0:
  dmi.product.name: MS-7360
  dmi.product.version: 1.0
  dmi.sys.vendor: MICRO-STAR INTERNATIONAL CO.,LTD

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212199/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212266] [NEW] [LENOVO 4291AK7] hibernate/resume failure

2013-08-14 Thread Bernie Innocenti

Public bug reported:

I typed pm-hibernate in a terminal.Hibernation appeared to work just
fine, but aAfter powering up the system, it just booted into a new
session.

Hibernate used to work with raring on the same hardware. Note that my
/home filesystem is a luks volume.

ProblemType: KernelOops
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-2-generic 3.11.0-2.5
ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
Uname: Linux 3.11.0-2-generic x86_64
Annotation: This occured during a previous hibernate and prevented it from 
resuming properly.
ApportVersion: 2.12-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  bernie 2377 F pulseaudio
Date: Wed Aug 14 09:45:17 2013
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: hibernate/resume
HibernationDevice: RESUME=UUID=128962f7-fa8f-448f-99ff-95bf45f8c7b2
InterpreterPath: /usr/bin/python3.3
MachineType: LENOVO 4291AK7
MarkForUpload: True
ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
ProcEnviron:
 TERM=linux
 PATH=(custom, no user)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=f77eb20c-0808-4845-b5a2-30c0475683a9 ro quiet splash 
resume=LABEL=swap pcie_aspm=force vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not 
responding.
RelatedPackageVersions:
 linux-restricted-modules-3.11.0-2-generic N/A
 linux-backports-modules-3.11.0-2-generic  N/A
 linux-firmware1.113
SourcePackage: linux
Title: [LENOVO 4291AK7] hibernate/resume failure
UpgradeStatus: Upgraded to saucy on 2013-07-03 (41 days ago)
UserGroups: pkcs11
dmi.bios.date: 07/19/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: 8DET63WW (1.33 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4291AK7
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvr8DET63WW(1.33):bd07/19/2012:svnLENOVO:pn4291AK7:pvrThinkPadX220:rvnLENOVO:rn4291AK7:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4291AK7
dmi.product.version: ThinkPad X220
dmi.sys.vendor: LENOVO

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-kerneloops hibernate resume saucy

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212266

Title:
  [LENOVO 4291AK7] hibernate/resume failure

Status in “linux” package in Ubuntu:
  New

Bug description:
  I typed pm-hibernate in a terminal.Hibernation appeared to work just
  fine, but aAfter powering up the system, it just booted into a new
  session.

  Hibernate used to work with raring on the same hardware. Note that my
  /home filesystem is a luks volume.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-2-generic 3.11.0-2.5
  ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
  Uname: Linux 3.11.0-2-generic x86_64
  Annotation: This occured during a previous hibernate and prevented it from 
resuming properly.
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bernie 2377 F pulseaudio
  Date: Wed Aug 14 09:45:17 2013
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: hibernate/resume
  HibernationDevice: RESUME=UUID=128962f7-fa8f-448f-99ff-95bf45f8c7b2
  InterpreterPath: /usr/bin/python3.3
  MachineType: LENOVO 4291AK7
  MarkForUpload: True
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=f77eb20c-0808-4845-b5a2-30c0475683a9 ro quiet splash 
resume=LABEL=swap pcie_aspm=force vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon 
not responding.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-2-generic N/A
   linux-backports-modules-3.11.0-2-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  Title: [LENOVO 4291AK7] hibernate/resume failure
  UpgradeStatus: Upgraded to saucy on 2013-07-03 (41 days ago)
  UserGroups: pkcs11
  dmi.bios.date: 07/19/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 8DET63WW (1.33 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 4291AK7
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr8DET63WW(1.33):bd07/19/2012:svnLENOVO:pn4291AK7:pvrThinkPadX220:rvnLENOVO:rn4291AK7:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 4291AK7

[Kernel-packages] [Bug 1212199] Re: Network not working after resume from suspend (r8169)

WORKING with kernel:
emanuel@test:~$ uname -r
3.7.10-030710-generic


** Attachment added: log after resume WORKING
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212199/+attachment/3772490/+files/dmesg2.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212199

Title:
  Network not working after resume from suspend (r8169)

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  http://www.webupd8.org/2013/01/fix-wireless-or-wired-network-not.html
  workaround not working

  related ? info:
  
https://github.com/torvalds/linux/commit/2a15cd2ff488a9fdb55e5e34060f499853b27c77

  I am running Ubuntu 13.10 with the latest updates

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-2-generic 3.11.0-2.5
  ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
  Uname: Linux 3.11.0-2-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  emanuel1634 F pulseaudio
  CurrentDmesg: [   18.315564] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link 
becomes ready
  Date: Wed Aug 14 13:42:10 2013
  HibernationDevice: RESUME=UUID=c295bea4-fefe-4d3b-8f12-ee5b580946db
  InstallationDate: Installed on 2013-05-02 (103 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130502)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360
  MarkForUpload: True
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=86fe6e26-730a-49ee-9ef7-096ce5dedeb0 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-2-generic N/A
   linux-backports-modules-3.11.0-2-generic  N/A
   linux-firmware1.113
  RfKill:
   
  SourcePackage: linux
  StagingDrivers: zram
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/11/2008
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V1.10
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: MS-7360
  dmi.board.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV1.10:bd11/11/2008:svnMICRO-STARINTERNATIONALCO.,LTD:pnMS-7360:pvr1.0:rvnMICRO-STARINTERNATIONALCO.,LTD:rnMS-7360:rvr1.0:cvnMICRO-STARINTERNATIONALCO.,LTD:ct3:cvr1.0:
  dmi.product.name: MS-7360
  dmi.product.version: 1.0
  dmi.sys.vendor: MICRO-STAR INTERNATIONAL CO.,LTD

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212199/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Kernel-packages] [Bug 1096989] Re: 10ec:8179 No wireless support for Lenovo IdeaCentre Q190 (RTL8188E)

2013-08-14 Thread Rujinschi Remus

Hello,

@Mr. Christopher M. Penalver
Ok thanks.

With best regards,
Rujinschi Remus


On Wed, Aug 14, 2013 at 3:36 AM, Christopher M. Penalver 
christopher.m.penal...@gmail.com wrote:

 Rujinschi Remus / Your Dudeness, if you have a bug in Ubuntu, the Ubuntu
 Kernel team, Ubuntu Bug Control team, and Ubuntu Bug Squad would like you
 to please file a new report by executing the following in a terminal:
 ubuntu-bug linux

 For more on this, please see the official Ubuntu documentation:
 Ubuntu Kernel Team:
 https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies
 Ubuntu Bug Control and Ubuntu Bug Squad:
 https://wiki.ubuntu.com/Bugs/BestPractices
 Ubuntu Community: https://wiki.ubuntu.com/ReportingBugs

 When opening up the new report, please feel free to subscribe me to it.

 Please note, not filing a new report would delay your problem being
 addressed as quickly as possible.

 Thank you for your understanding.

 --
 You received this bug notification because you are subscribed to the bug
 report.
 https://bugs.launchpad.net/bugs/1096989

 Title:
   10ec:8179 No wireless support for Lenovo IdeaCentre Q190 (RTL8188E)

 Status in HWE Next Project:
   New
 Status in The Linux Kernel:
   New
 Status in “linux” package in Ubuntu:
   Incomplete

 Bug description:
   I'm on 12.10. The wifi adapter doesn't seem to be recognized at all:
   doesn't show up in NetworkManager, no adapter listed by iwconfig. The
   wifi card seems to be a RTL8188E (lspci -nn tells me it's 10ec:8179).

   I've tried to:
  - install the Realtek driver for the RTL8188CE (seemed close
 enough...)
  - install the driver from
 https://github.com/tianon/linux-rtlwifi-8188ce
  - install linux-backports-modules-cw
  - upgrade to kernel 3.7

   None of those worked.

   ---
   ApportVersion: 2.6.1-0ubuntu10
   Architecture: amd64
   AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0:  cat1782 F pulseaudio
   CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1:
 nl80211 not found.
   DistroRelease: Ubuntu 12.10
   HibernationDevice: RESUME=UUID=b597ccff-c6a0-4caf-8d7a-86b5885c2e71
   InstallationDate: Installed on 2013-01-07 (29 days ago)
   InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64
 (20121017.5)
   IwConfig:
eth0  no wireless extensions.

lono wireless extensions.
   MachineType: LENOVO 10115
   MarkForUpload: True
   Package: linux (not installed)
   ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=set
LANG=en_US.UTF-8
SHELL=/bin/bash
   ProcFB: 0 inteldrmfb
   ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic
 root=UUID=181643fb-824f-49b7-bad9-b8a31c74a430 ro quiet splash vt.handoff=7
   ProcVersionSignature: Ubuntu 3.5.0-23.35-generic 3.5.7.2
   RelatedPackageVersions:
linux-restricted-modules-3.5.0-23-generic N/A
linux-backports-modules-3.5.0-23-generic  N/A
linux-firmware1.95
   RfKill:

   Tags:  quantal running-unity
   Uname: Linux 3.5.0-23-generic x86_64
   UpgradeStatus: No upgrade log present (probably fresh install)
   UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
   dmi.bios.date: 09/21/2012
   dmi.bios.vendor: LENOVO
   dmi.bios.version: EZKT12AUS
   dmi.board.name: INVALID
   dmi.board.vendor: LENOVO
   dmi.board.version: Win8 STD MM DPK IPG
   dmi.chassis.type: 3
   dmi.chassis.vendor: LENOVO
   dmi.chassis.version: Chassis Version
   dmi.modalias:
 dmi:bvnLENOVO:bvrEZKT12AUS:bd09/21/2012:svnLENOVO:pn10115:pvrIdeaCentreQ190:rvnLENOVO:rnINVALID:rvrWin8STDMMDPKIPG:cvnLENOVO:ct3:cvrChassisVersion:
   dmi.product.name: 10115
   dmi.product.version: IdeaCentre Q190
   dmi.sys.vendor: LENOVO

 To manage notifications about this bug go to:
 https://bugs.launchpad.net/hwe-next/+bug/1096989/+subscriptions


-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1096989

Title:
  10ec:8179 No wireless support for Lenovo IdeaCentre Q190 (RTL8188E)

Status in HWE Next Project:
  New
Status in The Linux Kernel:
  New
Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  I'm on 12.10. The wifi adapter doesn't seem to be recognized at all:
  doesn't show up in NetworkManager, no adapter listed by iwconfig. The
  wifi card seems to be a RTL8188E (lspci -nn tells me it's 10ec:8179).

  I've tried to:
     - install the Realtek driver for the RTL8188CE (seemed close enough...)
     - install the driver from https://github.com/tianon/linux-rtlwifi-8188ce
     - install linux-backports-modules-cw
     - upgrade to kernel 3.7

  None of those worked.

  ---
  ApportVersion: 2.6.1-0ubuntu10
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  cat1782 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  DistroRelease:

[Kernel-packages] [Bug 1211806] Re: USB disks with VFAT are not mountable in saucy

2013-08-14 Thread Jussi Pakkanen

It still exists.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1211806

Title:
  USB disks with VFAT are not mountable in saucy

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  I have two USB disk devices that don't work anymore when I updated to
  Saucy.

  The first is a plain USB stick, which prints this into dmesg:

  [26938.517257] sd 7:0:0:0: [sdd] 7928832 512-byte logical blocks: (4.05 
GB/3.78 GiB)
  [26938.518243] sd 7:0:0:0: [sdd] Write Protect is off
  [26938.518248] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
  [26938.519271] sd 7:0:0:0: [sdd] No Caching mode page present
  [26938.519277] sd 7:0:0:0: [sdd] Assuming drive cache: write through
  [26969.329050] usb 1-1.4.5.3: reset high-speed USB device number 8 using 
ehci-pci

  The second is an Android phone, which prints this to dmesg:

  [27177.508842] usb-storage 1-1.4.5.2:1.0: USB Mass Storage device detected
  [27177.509078] scsi9 : usb-storage 1-1.4.5.2:1.0
  [27178.511239] scsi 9:0:0:0: Direct-Access HTC  Android Phone0100 
PQ: 0 ANSI: 2
  [27178.511539] sd 9:0:0:0: Attached scsi generic sg4 type 0
  [27178.518163] sd 9:0:0:0: [sdd] 15523840 512-byte logical blocks: (7.94 
GB/7.40 GiB)
  [27178.520156] sd 9:0:0:0: [sdd] Write Protect is off
  [27178.520161] sd 9:0:0:0: [sdd] Mode Sense: 0f 00 00 00
  [27178.522172] sd 9:0:0:0: [sdd] Write cache: disabled, read cache: enabled, 
doesn't support DPO or FUA
  [27178.548336]  sdd: sdd1
  [27178.569834] sd 9:0:0:0: [sdd] Attached SCSI removable disk
  [27181.553057] usb 1-1.4.5.2: USB disconnect, device number 16
  [27181.559355] FAT-fs (sdd1): unable to read boot sector to mark fs as dirty

  Both devices:

  - work on other machines
  - fail when plugged to a hub or directly in the computer

  A USB disk with ext4 works flawlessly.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: linux-image (not installed)
  ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3
  Uname: Linux 3.10.0-6-generic x86_64
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  jpakkane   2060 F pulseaudio
   /dev/snd/controlC0:  jpakkane   2060 F pulseaudio
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Date: Tue Aug 13 17:23:03 2013
  InstallationDate: Installed on 2013-05-20 (85 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MarkForUpload: True
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.10.0-6-generic 
root=UUID=7dd49803-456a-4327-aeb5-7ea47105ef3e ro rootflags=subvol=@ quiet 
splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.10.0-6-generic N/A
   linux-backports-modules-3.10.0-6-generic  N/A
   linux-firmware1.113
  RfKill:
   
  SourcePackage: linux
  UpgradeStatus: Upgraded to saucy on 2013-08-08 (5 days ago)
  dmi.bios.date: 05/16/2013
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: EBH7710H.86A.0101.2013.0516.1649
  dmi.board.name: DH77EB
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAG39073-304
  dmi.chassis.type: 3
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrEBH7710H.86A.0101.2013.0516.1649:bd05/16/2013:svn:pn:pvr:rvnIntelCorporation:rnDH77EB:rvrAAG39073-304:cvn:ct3:cvr:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1211806/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212276] [NEW] bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build

2013-08-14 Thread Salih EMIN

Public bug reported:

Reported just after succesfull installetion of linux-generic-lts-raring
fron Ubuntu Software Center on 12.04.2. Probablly it faild to build with
the new 3.8 headers

ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16
Uname: Linux 3.5.0-37-generic i686
NonfreeKernelModules: wl
ApportVersion: 2.0.1-0ubuntu17.4
Architecture: i386
DKMSKernelVersion: 3.8.0-27-generic
Date: Wed Aug 14 17:16:46 2013
InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386 
(20130213)
MarkForUpload: True
PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
SourcePackage: bcmwl
Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: bcmwl (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 precise

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1212276

Title:
  bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
  failed to build

Status in “bcmwl” package in Ubuntu:
  New

Bug description:
  Reported just after succesfull installetion of linux-generic-lts-
  raring fron Ubuntu Software Center on 12.04.2. Probablly it faild to
  build with the new 3.8 headers

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16
  Uname: Linux 3.5.0-37-generic i686
  NonfreeKernelModules: wl
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  DKMSKernelVersion: 3.8.0-27-generic
  Date: Wed Aug 14 17:16:46 2013
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386 
(20130213)
  MarkForUpload: True
  PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1212276/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212276] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build

2013-08-14 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1212276

Title:
  bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
  failed to build

Status in “bcmwl” package in Ubuntu:
  New

Bug description:
  Reported just after succesfull installetion of linux-generic-lts-
  raring fron Ubuntu Software Center on 12.04.2. Probablly it faild to
  build with the new 3.8 headers

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16
  Uname: Linux 3.5.0-37-generic i686
  NonfreeKernelModules: wl
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  DKMSKernelVersion: 3.8.0-27-generic
  Date: Wed Aug 14 17:16:46 2013
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386 
(20130213)
  MarkForUpload: True
  PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1212276/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212266] Status changed to Confirmed

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1212266

Title:
  [LENOVO 4291AK7] hibernate/resume failure

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  I typed pm-hibernate in a terminal.Hibernation appeared to work just
  fine, but aAfter powering up the system, it just booted into a new
  session.

  Hibernate used to work with raring on the same hardware. Note that my
  /home filesystem is a luks volume.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 13.10
  Package: linux-image-3.11.0-2-generic 3.11.0-2.5
  ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5
  Uname: Linux 3.11.0-2-generic x86_64
  Annotation: This occured during a previous hibernate and prevented it from 
resuming properly.
  ApportVersion: 2.12-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bernie 2377 F pulseaudio
  Date: Wed Aug 14 09:45:17 2013
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: hibernate/resume
  HibernationDevice: RESUME=UUID=128962f7-fa8f-448f-99ff-95bf45f8c7b2
  InterpreterPath: /usr/bin/python3.3
  MachineType: LENOVO 4291AK7
  MarkForUpload: True
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic 
root=UUID=f77eb20c-0808-4845-b5a2-30c0475683a9 ro quiet splash 
resume=LABEL=swap pcie_aspm=force vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon 
not responding.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-2-generic N/A
   linux-backports-modules-3.11.0-2-generic  N/A
   linux-firmware1.113
  SourcePackage: linux
  Title: [LENOVO 4291AK7] hibernate/resume failure
  UpgradeStatus: Upgraded to saucy on 2013-07-03 (41 days ago)
  UserGroups: pkcs11
  dmi.bios.date: 07/19/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 8DET63WW (1.33 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 4291AK7
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr8DET63WW(1.33):bd07/19/2012:svnLENOVO:pn4291AK7:pvrThinkPadX220:rvnLENOVO:rn4291AK7:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 4291AK7
  dmi.product.version: ThinkPad X220
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212266/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212287] [NEW] bluetooth will not reconnect after first disconnect

2013-08-14 Thread km

Public bug reported:

Bluetooth had been working well for me until recently. I'm running
Ubuntu 13.04 with a bluetooth USB dongle that I use to pair with various
headphones.

Suddenly, after the first successful connection to the headphone, once I
disconnect either from the headphone side or the computer side, the
headphones will no longer reconnect.

I've found that to reconnect, I need to

 stop bluetooth;rmmod bnep btusb rfcomm bluetooth ; start bluetooth

then remove and reinsert the bluetooth USB dongle. Then I can reconnect.

I've been using the same hardware for quite a while and this problem is
very recent.  The only software changes are by the patches which I
always accept.

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: bluez 4.101-0ubuntu8b1
ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5
Uname: Linux 3.8.0-29-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.9.2-0ubuntu8.3
Architecture: amd64
Date: Wed Aug 14 10:34:08 2013
ExecutablePath: /usr/sbin/bluetoothd
InstallationDate: Installed on 2012-12-14 (242 days ago)
InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
InterestingModules: btusb rfcomm bnep bluetooth
MachineType: Hewlett-Packard HP Z210 Workstation
MarkForUpload: True
ProcEnviron:
 PATH=(custom, no user)
 TERM=linux
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic 
root=UUID=0659f1b3-4361-442f-bf62-b9b3393a3b95 ro quiet splash
SourcePackage: bluez
UpgradeStatus: Upgraded to raring on 2013-04-27 (109 days ago)
dmi.bios.date: 11/27/2012
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: J51 v01.44
dmi.board.asset.tag: 2UA145126W
dmi.board.name: 1588h
dmi.board.vendor: Hewlett-Packard
dmi.chassis.asset.tag: 2UA145126W
dmi.chassis.type: 6
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: 
dmi:bvnHewlett-Packard:bvrJ51v01.44:bd11/27/2012:svnHewlett-Packard:pnHPZ210Workstation:pvr:rvnHewlett-Packard:rn1588h:rvr:cvnHewlett-Packard:ct6:cvr:
dmi.product.name: HP Z210 Workstation
dmi.sys.vendor: Hewlett-Packard
hciconfig:
 hci0:  Type: BR/EDR  Bus: USB
BD Address: 00:18:E4:0D:18:12  ACL MTU: 192:8  SCO MTU: 64:8
UP RUNNING PSCAN 
RX bytes:87163 acl:36 sco:1679 events:79 errors:0
TX bytes:86224 acl:41 sco:1666 commands:22 errors:0
rfkill:
 1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no

** Affects: bluez (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug raring third-party-packages

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1212287

Title:
  bluetooth will not reconnect after first disconnect

Status in “bluez” package in Ubuntu:
  New

Bug description:
  Bluetooth had been working well for me until recently. I'm running
  Ubuntu 13.04 with a bluetooth USB dongle that I use to pair with
  various headphones.

  Suddenly, after the first successful connection to the headphone, once
  I disconnect either from the headphone side or the computer side, the
  headphones will no longer reconnect.

  I've found that to reconnect, I need to

   stop bluetooth;rmmod bnep btusb rfcomm bluetooth ; start
  bluetooth

  then remove and reinsert the bluetooth USB dongle. Then I can
  reconnect.

  I've been using the same hardware for quite a while and this problem
  is very recent.  The only software changes are by the patches which I
  always accept.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: bluez 4.101-0ubuntu8b1
  ProcVersionSignature: Ubuntu 3.8.0-29.42-generic 3.8.13.5
  Uname: Linux 3.8.0-29-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  Date: Wed Aug 14 10:34:08 2013
  ExecutablePath: /usr/sbin/bluetoothd
  InstallationDate: Installed on 2012-12-14 (242 days ago)
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  InterestingModules: btusb rfcomm bnep bluetooth
  MachineType: Hewlett-Packard HP Z210 Workstation
  MarkForUpload: True
  ProcEnviron:
   PATH=(custom, no user)
   TERM=linux
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-29-generic 
root=UUID=0659f1b3-4361-442f-bf62-b9b3393a3b95 ro quiet splash
  SourcePackage: bluez
  UpgradeStatus: Upgraded to raring on 2013-04-27 (109 days ago)
  dmi.bios.date: 11/27/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: J51 v01.44
  dmi.board.asset.tag: 2UA145126W
  dmi.board.name: 1588h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: 2UA145126W
  dmi.chassis.type: 6
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrJ51v01.44:bd11/27/2012:svnHewlett-Packard:pnHPZ210Workstation:pvr:rvnHewlett-Packard:rn1588h:rvr:cvnHewlett-Packard:ct6:cvr:
  dmi.product.name: HP Z210 Workstation
  dmi.sys.vendor: Hewlett-Packard
  hciconfig:
   hci0:Type: BR/EDR  Bus: USB
BD Address: 00:18:E4:0D:18:12  ACL MTU: 192:8  SCO

[Kernel-packages] [Bug 1212276] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: bcmwl (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1212276

Title:
  bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
  failed to build

Status in “bcmwl” package in Ubuntu:
  Confirmed

Bug description:
  Reported just after successful installation of linux-generic-lts-
  raring from Ubuntu Software Center on 12.04.2. Probably it failed to
  build with the new 3.8 headers.

  I also tried to install it manually from terminal following 
http://askubuntu.com/questions/265553/broadcom-corp-bcm4313-wirelss-not-detected-in-ubuntu-12-10
  but with no success:
  Terminal output
  --
  Inspiron-N5010:~$ sudo apt-get install --reinstall bcmwl-kernel-source
  Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
  Κατασκευή Δένδρου Εξαρτήσεων  
  Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
  0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 1 επανεγκατεστημένα,0 θα αφαιρεθούν 
και 0 δεν αναβαθμίζονται.
  Χρειάζεται να μεταφορτωθούν 1301 kB από αρχεία.
  Μετά από αυτή τη λειτουργία, θα χρησιμοποιηθούν 0 B χώρου από το δίσκο.
  Φέρε:1 http://gr.archive.ubuntu.com/ubuntu/ precise-updates/restricted 
bcmwl-kernel-source i386 6.20.155.1+bdcom-0ubuntu0.0.1 [1301 kB]
  Μεταφορτώθηκαν 1301 kB σε 2s (624 kB/s)  
  (Ανάγνωση βάσης δεδομένων ... 632704 files and directories currently 
installed.)
  Προετοιμασία για αντικατάσταση bcmwl-kernel-source 
6.20.155.1+bdcom-0ubuntu0.0.1 (χρησιμοποιώντας το 
.../bcmwl-kernel-source_6.20.155.1+bdcom-0ubuntu0.0.1_i386.deb) ...
  Removing all DKMS Modules
  Done.
  Αποσυμπίεση του αντικαταστάτη bcmwl-kernel-source ...
  Γίνεται εγκατάσταση bcmwl-kernel-source (6.20.155.1+bdcom-0ubuntu0.0.1) ...
  Loading new bcmwl-6.20.155.1+bdcom DKMS files...
  Building only for 3.8.0-27-generic
  Building for architecture i686
  Building initial module for 3.8.0-27-generic
  Error! Bad return status for module build on kernel: 3.8.0-27-generic (i686)
  Consult /var/lib/dkms/bcmwl/6.20.155.1+bdcom/build/make.log for more 
information.
  FATAL: Module wl not found.
  FATAL: Error running install command for wl
  update-initramfs: deferring update (trigger activated)
  Επεξεργασία των trigger για initramfs-tools ...
  update-initramfs: Generating /boot/initrd.img-3.8.0-27-generic
  Inspiron-N5010:~$
  --

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16
  Uname: Linux 3.5.0-37-generic i686
  NonfreeKernelModules: wl
  ApportVersion: 2.0.1-0ubuntu17.4
  Architecture: i386
  DKMSKernelVersion: 3.8.0-27-generic
  Date: Wed Aug 14 17:16:46 2013
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386 
(20130213)
  MarkForUpload: True
  PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1212276/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1201220] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build [Error: invalid character (0x8a) in mnemonic]

2013-08-14 Thread Salih EMIN

*** This bug is a duplicate of bug 1212276 ***
https://bugs.launchpad.net/bugs/1212276

** This bug has been marked a duplicate of bug 1212276
   bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1201220

Title:
  bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
  failed to build [Error: invalid character (0x8a) in mnemonic]

Status in “bcmwl” package in Ubuntu:
  New

Bug description:
  screen fills with text and freezes

  ProblemType: Package
  DistroRelease: Ubuntu 12.04
  Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
  ProcVersionSignature: Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2
  Uname: Linux 3.5.0-23-generic i686
  ApportVersion: 2.0.1-0ubuntu17.1
  Architecture: i386
  DKMSKernelVersion: 3.5.0-23-generic
  Date: Sun Jul 14 17:02:35 2013
  InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386 
(20130213)
  MarkForUpload: True
  PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1201220/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1212276] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build

2013-08-14 Thread Salih EMIN

** Description changed:

- Reported just after succesfull installetion of linux-generic-lts-raring
- fron Ubuntu Software Center on 12.04.2. Probablly it faild to build with
- the new 3.8 headers
+ Reported just after successful installation of linux-generic-lts-raring
+ from Ubuntu Software Center on 12.04.2. Probably it failed to build with
+ the new 3.8 headers.
+
+ I also tried to install it manually from terminal following
http://askubuntu.com/questions/265553/broadcom-corp-bcm4313-wirelss-not-detected-in-ubuntu-12-10
+ but with no success:
+ Terminal output
+ --
+ Inspiron-N5010:~$ sudo apt-get install --reinstall bcmwl-kernel-source
+ Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
+ Κατασκευή Δένδρου Εξαρτήσεων
+ Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
+ 0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 1 επανεγκατεστημένα,0 θα αφαιρεθούν
και 0 δεν αναβαθμίζονται.
+ Χρειάζεται να μεταφορτωθούν 1301 kB από αρχεία.
+ Μετά από αυτή τη λειτουργία, θα χρησιμοποιηθούν 0 B χώρου από το δίσκο.
+ Φέρε:1 http://gr.archive.ubuntu.com/ubuntu/ precise-updates/restricted
bcmwl-kernel-source i386 6.20.155.1+bdcom-0ubuntu0.0.1 [1301 kB]
+ Μεταφορτώθηκαν 1301 kB σε 2s (624 kB/s)
+ (Ανάγνωση βάσης δεδομένων ... 632704 files and directories currently
installed.)
+ Προετοιμασία για αντικατάσταση bcmwl-kernel-source
6.20.155.1+bdcom-0ubuntu0.0.1 (χρησιμοποιώντας το
.../bcmwl-kernel-source_6.20.155.1+bdcom-0ubuntu0.0.1_i386.deb) ...
+ Removing all DKMS Modules
+ Done.
+ Αποσυμπίεση του αντικαταστάτη bcmwl-kernel-source ...
+ Γίνεται εγκατάσταση bcmwl-kernel-source (6.20.155.1+bdcom-0ubuntu0.0.1) ...
+ Loading new bcmwl-6.20.155.1+bdcom DKMS files...
+ Building only for 3.8.0-27-generic
+ Building for architecture i686
+ Building initial module for 3.8.0-27-generic
+ Error! Bad return status for module build on kernel: 3.8.0-27-generic (i686)
+ Consult /var/lib/dkms/bcmwl/6.20.155.1+bdcom/build/make.log for more
information.
+ FATAL: Module wl not found.
+ FATAL: Error running install command for wl
+ update-initramfs: deferring update (trigger activated)
+ Επεξεργασία των trigger για initramfs-tools ...
+ update-initramfs: Generating /boot/initrd.img-3.8.0-27-generic
+ Inspiron-N5010:~$
+ --

ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1
ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16
Uname: Linux 3.5.0-37-generic i686
NonfreeKernelModules: wl
ApportVersion: 2.0.1-0ubuntu17.4
Architecture: i386
DKMSKernelVersion: 3.8.0-27-generic
Date: Wed Aug 14 17:16:46 2013
InstallationMedia: Ubuntu 12.04.2 LTS Precise Pangolin - Release i386
(20130213)
MarkForUpload: True
PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1
SourcePackage: bcmwl
Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1212276

Title:
bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module
failed to build

Status in “bcmwl” package in Ubuntu:
Confirmed

Bug description:
Reported just after successful installation of linux-generic-lts-
raring from Ubuntu Software Center on 12.04.2. Probably it failed to
build with the new 3.8 headers.

I also tried to install it manually from terminal following
http://askubuntu.com/questions/265553/broadcom-corp-bcm4313-wirelss-not-detected-in-ubuntu-12-10
but with no success:
Terminal output
--
Inspiron-N5010:~$ sudo apt-get install --reinstall bcmwl-kernel-source
Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε
Κατασκευή Δένδρου Εξαρτήσεων
Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε
0 αναβαθμίστηκαν, 0 νέο εγκατεστημένα, 1 επανεγκατεστημένα,0 θα αφαιρεθούν
και 0 δεν αναβαθμίζονται.
Χρειάζεται να μεταφορτωθούν 1301 kB από αρχεία.
Μετά από αυτή τη λειτουργία, θα χρησιμοποιηθούν 0 B χώρου από το δίσκο.
Φέρε:1 http://gr.archive.ubuntu.com/ubuntu/ precise-updates/restricted
bcmwl-kernel-source i386 6.20.155.1+bdcom-0ubuntu0.0.1 [1301 kB]
Μεταφορτώθηκαν 1301 kB σε 2s (624 kB/s)
(Ανάγνωση βάσης δεδομένων ... 632704 files and directories currently
installed.)
Προετοιμασία για αντικατάσταση bcmwl-kernel-source
6.20.155.1+bdcom-0ubuntu0.0.1 (χρησιμοποιώντας το
.../bcmwl-kernel-source_6.20.155.1+bdcom-0ubuntu0.0.1_i386.deb) ...
Removing all DKMS Modules
Done.
Αποσυμπίεση του αντικαταστάτη bcmwl-kernel-source ...
Γίνεται εγκατάσταση bcmwl-kernel-source (6.20.155.1+bdcom-0ubuntu0.0.1) ...
Loading new bcmwl-6.20.155.1+bdcom DKMS files...
Building only for 3.8.0-27-generic
Building for architecture i686
Building initial module for

[Kernel-packages] [Bug 1212199] Re: Network not working after resume from suspend (r8169)