[Kernel-packages] [Bug 1258919] Re: printing issue with parallel-to-usb adapter
I just made another test : I stopped the cups service, loaded usblp with modprobe, and ran : cat lines.ps | gs -q -sDEVICE=ppmraw -r600 -sPAPERSIZE=letter -dNOPAUSE -sOutputFile=- - | pnm2ppa --eco -v 720 -i - -o - /dev/usb/lp0 so : lines.ps contains 56 lines to be printed, which fails with cups+libusb : here : SUCCESS ! I am not sure that this helps for my diagnostic - it just tells that cups + usblp is flawed with my devices ... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258919 Title: printing issue with parallel-to-usb adapter Status in “linux” package in Ubuntu: Triaged Bug description: Hello, So far I am assuming that the problem is a driver one. I have an old HP Deskjet 710C parallel printer. I really don't print a lot, so it ages well. I just replaced my former desktop with a new barebone without parallel port - no space to embed a PCI IEEE 1284 adapter. So I just bought a cable which is a parallel-to-usb adapter : it is a Sweex adapter, the kernel recognizes it as : Prolific Technology, Inc. PL2305 Parallel Port I configured cups to use this new adapter, with the same old pnm2ppa driver. When I try to print a test page from cups (or other printings) it goes well, until close to the end, when the printing suddenly stops, without the sheet being released : I have to power off the printer, which as a side effect triggers the sheet ejection before power off. I read various articles and forums on this topic before posting. Playing with usblp, kernel blacklists and /dev/usb/lp0 does not solve anything. I wanted to be sure that it was not the Prolific controller which was flawed. So I connected it to a windows 7 virtual machine into Virtualbox; Windows installed various drivers, and eventually various printings ran seamlessly - without my issue on GNU/Linux. So my conclusion is that the controller is ok. I also just tested a mainline kernel : http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.13-rc3-trusty/linux- image-3.13.0-031300rc3-generic_3.13.0-031300rc3.201312061335_amd64.deb no improvement, my test page stops being printed at the same spot close to the end. So I can assume that there is a bug in the controller's driver. So I am posting this bug report here : can I do anything else for helping ? Is there any hope that this will be investigated further ? Best regards R. Grasso ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image (not installed) ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Sun Dec 8 13:53:43 2013 HibernationDevice: RESUME=UUID=a16e3a2c-0f38-4e72-9c51-145a864b60a1 InstallationDate: Installed on 2013-11-06 (32 days ago) InstallationMedia: Kubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: Shuttle Inc. DS47D MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic root=UUID=8c51cecc-9054-4edc-8b06-afb7bb4ebd2e ro PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-14-generic N/A linux-backports-modules-3.11.0-14-generic N/A linux-firmware 1.116 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/09/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.03 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FS47D dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.03:bd08/09/2013:svnShuttleInc.:pnDS47D:pvrV1.0:rvnShuttleInc.:rnFS47D:rvr1.0:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: DS47D dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261296] Re: microphone mute led can't work on the Thinkpad laptops
** Tags added: blocks-hwcert-enablement ** Changed in: hwe-next Importance: Undecided = High ** Changed in: hwe-next Assignee: (unassigned) = Hui Wang (hui.wang) ** Changed in: hwe-next Status: New = In Progress ** Changed in: linux (Ubuntu) Status: New = In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261296 Title: microphone mute led can't work on the Thinkpad laptops Status in HWE Next Project: In Progress Status in “linux” package in Ubuntu: In Progress Bug description: Some lenovo thinkpad laptops have microphone mute hotkey button, and with a led on the button to indicate the microphone mute status. the driver for this led has not been implemented in the linux driver, so the led can't work. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1261296/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1208257] Re: [HP ProBook 4540s] brightness control problems
I too can confirm that on the same laptop. Also once i wake it up from sleep and enter my password the screen goes blank. I need to repress the power button and screen is back again. Should i install any drivers. I am facing quiet a few screen issues. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1208257 Title: [HP ProBook 4540s] brightness control problems Status in “linux” package in Ubuntu: Incomplete Status in “linux” package in Baltix: Triaged Bug description: I bought a laptop in December 2012, immediately tried to put Ubuntu 12.10, got broken wi-fi and non-working graphics acceleration. Updated kernel to version 3.6, with graphic acceleration was all right, even partially earned wi-fi. After some time wi-fi hang, helped only restart the network subsystem. Updated kernel to 3.7, with the wi-fi was all became normal, but stopped working brightness control with the Fn keys. Progress bar indicates that the brightness changes, but in fact nothing happens. Tried the new distribution 13.04, on 3.8 kernels, 3.9, 3.10, nothing changes. Upon adjustment has broken in 3.7 kernel. It turns out that this is a regression. WORKAROUND: Problem gone with kernel parameter acpi_backlight=vendor. --- ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: country UA: (2402 - 2482 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-08-04 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=f5b4658c-870e-449d-a9d7-5caaa6eec2f3 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3887 F pulseaudio ubuntu14062 F pulseaudio CRDA: country UA: (2400 - 2483 @ 40), (N/A, 20), NO-OUTDOOR (5150 - 5350 @ 40), (N/A, 20), NO-OUTDOOR (57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130807) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper persistent initrd=/casper/initrd.lz splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3 RelatedPackageVersions: linux-restricted-modules-3.10.0-6-generic N/A linux-backports-modules-3.10.0-6-generic N/A linux-firmware1.113 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: saucy Uname: Linux 3.10.0-6-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to:
[Kernel-packages] [Bug 1258919] Re: printing issue with parallel-to-usb adapter
I meant : cups+libusb is flawed : sorry ! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1258919 Title: printing issue with parallel-to-usb adapter Status in “linux” package in Ubuntu: Triaged Bug description: Hello, So far I am assuming that the problem is a driver one. I have an old HP Deskjet 710C parallel printer. I really don't print a lot, so it ages well. I just replaced my former desktop with a new barebone without parallel port - no space to embed a PCI IEEE 1284 adapter. So I just bought a cable which is a parallel-to-usb adapter : it is a Sweex adapter, the kernel recognizes it as : Prolific Technology, Inc. PL2305 Parallel Port I configured cups to use this new adapter, with the same old pnm2ppa driver. When I try to print a test page from cups (or other printings) it goes well, until close to the end, when the printing suddenly stops, without the sheet being released : I have to power off the printer, which as a side effect triggers the sheet ejection before power off. I read various articles and forums on this topic before posting. Playing with usblp, kernel blacklists and /dev/usb/lp0 does not solve anything. I wanted to be sure that it was not the Prolific controller which was flawed. So I connected it to a windows 7 virtual machine into Virtualbox; Windows installed various drivers, and eventually various printings ran seamlessly - without my issue on GNU/Linux. So my conclusion is that the controller is ok. I also just tested a mainline kernel : http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.13-rc3-trusty/linux- image-3.13.0-031300rc3-generic_3.13.0-031300rc3.201312061335_amd64.deb no improvement, my test page stops being printed at the same spot close to the end. So I can assume that there is a bug in the controller's driver. So I am posting this bug report here : can I do anything else for helping ? Is there any hope that this will be investigated further ? Best regards R. Grasso ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image (not installed) ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Sun Dec 8 13:53:43 2013 HibernationDevice: RESUME=UUID=a16e3a2c-0f38-4e72-9c51-145a864b60a1 InstallationDate: Installed on 2013-11-06 (32 days ago) InstallationMedia: Kubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: Shuttle Inc. DS47D MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic root=UUID=8c51cecc-9054-4edc-8b06-afb7bb4ebd2e ro PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-14-generic N/A linux-backports-modules-3.11.0-14-generic N/A linux-firmware 1.116 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/09/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.03 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: FS47D dmi.board.vendor: Shuttle Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.03:bd08/09/2013:svnShuttleInc.:pnDS47D:pvrV1.0:rvnShuttleInc.:rnFS47D:rvr1.0:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: DS47D dmi.product.version: V1.0 dmi.sys.vendor: Shuttle Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1258919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261308] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1261308 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete ** Tags added: trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261308 Title: Intel ivy bridge crash on a CI machine executing autopilot tests Status in “linux” package in Ubuntu: Incomplete Bug description: A following crash was gotten in CI when running autopilot tests: /var/local/autopilot/autopilot.log: 06:25:06.559 DEBUG globals:155 - Starting: ['/usr/bin/recordmydesktop', '--fps=6', '--no-wm-check', '--no-sound', '--no-frame', '-o', '/var/local/autopilot//videos/autopilot.tests.functional.test_input_stack.TouchGesturesTests.test_pinch_gesture.ogv'] /var/local/autopilot/autopilot.log: 06:25:06.569 INFO __init__:162 - Launching process: ['/usr/bin/qmlscene', '-qt=qt5', '-testability', '/tmp/tmpyErdkz.qml'] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.717922] kernel BUG at /build/buildd/linux-3.12.0/drivers/gpu/drm/i915/i915_gem.c:4839! /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.736780] Modules linked in: bluetooth veth squashfs aufs nls_utf8 isofs xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc iptable_filter ip_tables x_tables x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw snd_hda_codec_hdmi gf128mul snd_hda_codec_realtek ablk_helper cryptd i915 drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit mxm_wmi mei_me snd_timer snd mei soundcore psmouse serio_raw joydev lpc_ich microcode wmi mac_hid video lp parport hid_generic usbhid hid e1000e ahci ptp libahci pps_core /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.822345] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0097.2012.1228.1346 12/28/2012 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.851440] EIP: 0060:[f901d776] EFLAGS: 00210246 CPU: 2 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.880754] EAX: e6b90270 EBX: e6b90270 ECX: ed4b4000 EDX: ed4b55e0 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.910940] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.941836] Stack: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.973256] e8921c00 00b4 00c0 e6b90294 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.005758] Call Trace: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.037812] [c130a8ec] ? _copy_from_user+0x2c/0x40 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.070637] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.104147] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.137652] [f8e2c430] ? drm_copy_field+0x70/0x70 [drm] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.171153] [c16561af] ? __do_page_fault+0x24f/0x530 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.204938] [c11826c0] SyS_ioctl+0x60/0x80 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.238719] Code: 39 50 f4 8d 48 cc 75 0a eb 1b 8d 76 00 39 50 f4 74 13 8b 41 34 39 c3 8d 48 cc 75 f1 b8 ff ff ff ff 5b 5d c3 90 8b 41 18 5b 5d c3 0f 0b 90 8d b4 26 00 00 00 00 55 89 e5 56 53 3e 8d 74 26 00 8b /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.367196] ---[ end trace d36900663c323dfa ]--- /var/local/autopilot/autopilot.log: 06:25:33.001 ERROR proxies:410 - Introspect error on :1.180:/com/canonical/Autopilot/Introspection: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. /var/local/autopilot/autopilot.log: 06:25:33.001 DEBUG proxies:413 - Executing introspect queue due to error /home/ubuntu/.cache/upstart/gnome
Re: [Kernel-packages] [Bug 610055] Re: [pm-utils][maverick] system stutters, freezes, hangs, gratuitous 'Commit=0' errors
Hello, I seem to recall this was a hardware fault in my case therefore for me it's OK to close this bug. Thanks, John -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/610055 Title: [Dell Latitude E6400] system stutters, freezes, hangs, gratuitous 'Commit=0' errors Status in “linux” package in Ubuntu: Incomplete Bug description: I'm not sure if this should be one bug report or many, and I don't have much info to put in here. My computer is stuttering (doing small one-second freeze, similar to a OOM but it's not that), freezing (mouse and keyboard lock up, but wifi still blinks) and hanging completely (although this might be the same as the latter, because it happens when I open the lid - not a suspend/resume cycle, just closing the lid while on AC, opening it, blank screen and no activity). There is very little in the logs. The stuttering happens at random times, but especially when plugging in AC, at which point I get a SATA error in the logs, something like: Jul 21 10:54:31 hulla kernel: [ 5913.787813] ata6: exception Emask 0x10 SAct 0x0 SErr 0x404 action 0xe frozen Jul 21 10:54:31 hulla kernel: [ 5913.787823] ata6: irq_stat 0x0040, connection status changed Jul 21 10:54:31 hulla kernel: [ 5913.787831] ata6: SError: { CommWake DevExch } Jul 21 10:54:31 hulla kernel: [ 5913.787845] ata6: hard resetting link Jul 21 10:54:41 hulla kernel: [ 5923.792597] ata6: softreset failed (device not ready) Jul 21 10:54:41 hulla kernel: [ 5923.792609] ata6: hard resetting link setting /sys/class/scsi_host/host1/link_power_management_policy to min_power stops the stuttering once it's started, and turning off IRRT seems to have gotten rid of them (but the system is slower as a result). I also get something similar almost every day, right after cron finishes, Jul 24 15:57:10 hulla anacron[15536]: Normal exit (0 jobs run) Jul 24 15:57:10 hulla kernel: [60453.149759] ata1.00: configured for UDMA/133 Jul 24 15:57:10 hulla kernel: [60453.149763] ata1: EH complete Jul 24 15:57:10 hulla kernel: [60453.149847] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 24 15:57:10 hulla kernel: [60453.240632] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 Jul 24 15:57:10 hulla kernel: [60453.282743] EXT4-fs (sda1): re-mounted. Opts: commit=0 Jul 24 15:57:11 hulla kernel: [60453.456970] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5 action 0xe frozen Jul 24 15:57:11 hulla kernel: [60453.456980] ata2: irq_stat 0x0040, PHY RDY changed Jul 24 15:57:11 hulla kernel: [60453.456988] ata2: SError: { PHYRdyChg CommWake } Jul 24 15:57:11 hulla kernel: [60453.457000] ata2: hard resetting link Jul 24 15:57:12 hulla kernel: [60454.382582] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 24 15:57:12 hulla kernel: [60454.422044] ata2.00: configured for UDMA/100 Jul 24 15:57:12 hulla kernel: [60454.423791] ata2: EH complete Jul 24 15:57:31 hulla kernel: [60473.892676] usbcore: deregistering interface driver option Jul 24 15:57:31 hulla kernel: [60473.892765] USB Serial deregistering driver GSM modem (1-port) Jul 24 15:57:31 hulla kernel: [60473.952548] usbcore: deregistering interface driver usbserial_generic Jul 24 15:57:31 hulla kernel: [60473.953014] USB Serial deregistering driver generic but I'm not sure it's the same thing. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-10-generic 2.6.35-10.15 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-10.15-generic 2.6.35-rc5 Uname: Linux 2.6.35-10-generic x86_64 AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access /dev/snd/: No such file or directory AplayDevices: aplay: device_list:235: no soundcards found... Architecture: amd64 ArecordDevices: arecord: device_list:235: no soundcards found... Date: Mon Jul 26 09:07:17 2010 Frequency: Once a day. InstallationMedia: Ubuntu 10.04 Lucid Lynx - Alpha amd64 (20100224.1) MachineType: Dell Inc. Latitude E6400 ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.35-10-generic root=/dev/mapper/hostname ro crashkernel=384M-2G:64M,2G-:128M quiet splash ProcEnviron: LANGUAGE=en_GB:en_US:en PATH=(custom, user) LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: linux dmi.bios.date: 10/30/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: A19 dmi.board.name: 0U692R dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA19:bd10/30/2009:svnDellInc.:pnLatitudeE6400:pvr:rvnDellInc.:rn0U692R:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude E6400 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/610055/+subscriptions -- Mailing
[Kernel-packages] [Bug 1259435] Re: No external mic can be detected on the machines with codec (Subsystem Id: 0x10280623)
There is a patch referencing this bug in the upstream 3.13-rc4 kernel. commit 6c6eb4270c209cd3b46e4f0bb6b6480b53398111 - ALSA: hda - A Dell headset detection quirk -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1259435 Title: No external mic can be detected on the machines with codec (Subsystem Id: 0x10280623) Status in HWE Next Project: In Progress Status in “linux” package in Ubuntu: In Progress Bug description: 1. plug in a 3-ring headset 2. go to sound settings input tab 3. check if external mic is detected To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1259435/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261308] Re: Intel ivy bridge crash on a CI machine executing autopilot tests
The log excerpt is collected as part of an automated test run. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261308 Title: Intel ivy bridge crash on a CI machine executing autopilot tests Status in “linux” package in Ubuntu: Confirmed Bug description: A following crash was gotten in CI when running autopilot tests: /var/local/autopilot/autopilot.log: 06:25:06.559 DEBUG globals:155 - Starting: ['/usr/bin/recordmydesktop', '--fps=6', '--no-wm-check', '--no-sound', '--no-frame', '-o', '/var/local/autopilot//videos/autopilot.tests.functional.test_input_stack.TouchGesturesTests.test_pinch_gesture.ogv'] /var/local/autopilot/autopilot.log: 06:25:06.569 INFO __init__:162 - Launching process: ['/usr/bin/qmlscene', '-qt=qt5', '-testability', '/tmp/tmpyErdkz.qml'] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.717922] kernel BUG at /build/buildd/linux-3.12.0/drivers/gpu/drm/i915/i915_gem.c:4839! /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.736780] Modules linked in: bluetooth veth squashfs aufs nls_utf8 isofs xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc iptable_filter ip_tables x_tables x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw snd_hda_codec_hdmi gf128mul snd_hda_codec_realtek ablk_helper cryptd i915 drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit mxm_wmi mei_me snd_timer snd mei soundcore psmouse serio_raw joydev lpc_ich microcode wmi mac_hid video lp parport hid_generic usbhid hid e1000e ahci ptp libahci pps_core /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.822345] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0097.2012.1228.1346 12/28/2012 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.851440] EIP: 0060:[f901d776] EFLAGS: 00210246 CPU: 2 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.880754] EAX: e6b90270 EBX: e6b90270 ECX: ed4b4000 EDX: ed4b55e0 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.910940] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.941836] Stack: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.973256] e8921c00 00b4 00c0 e6b90294 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.005758] Call Trace: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.037812] [c130a8ec] ? _copy_from_user+0x2c/0x40 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.070637] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.104147] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.137652] [f8e2c430] ? drm_copy_field+0x70/0x70 [drm] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.171153] [c16561af] ? __do_page_fault+0x24f/0x530 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.204938] [c11826c0] SyS_ioctl+0x60/0x80 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.238719] Code: 39 50 f4 8d 48 cc 75 0a eb 1b 8d 76 00 39 50 f4 74 13 8b 41 34 39 c3 8d 48 cc 75 f1 b8 ff ff ff ff 5b 5d c3 90 8b 41 18 5b 5d c3 0f 0b 90 8d b4 26 00 00 00 00 55 89 e5 56 53 3e 8d 74 26 00 8b /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.367196] ---[ end trace d36900663c323dfa ]--- /var/local/autopilot/autopilot.log: 06:25:33.001 ERROR proxies:410 - Introspect error on :1.180:/com/canonical/Autopilot/Introspection: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. /var/local/autopilot/autopilot.log: 06:25:33.001 DEBUG proxies:413 - Executing introspect queue due to error /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:32 unity unknown:0 Failed to fetch xid: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity unknown:0 Failed to fetch type: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity unknown:0 Failed to fetch monitor: Timeout was reached /home/ubuntu/.cache/upstart/gnome
[Kernel-packages] [Bug 1261308] Re: Intel ivy bridge crash on a CI machine executing autopilot tests
** Tags added: ci-engineering -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261308 Title: Intel ivy bridge crash on a CI machine executing autopilot tests Status in “linux” package in Ubuntu: Confirmed Bug description: A following crash was gotten in CI when running autopilot tests: /var/local/autopilot/autopilot.log: 06:25:06.559 DEBUG globals:155 - Starting: ['/usr/bin/recordmydesktop', '--fps=6', '--no-wm-check', '--no-sound', '--no-frame', '-o', '/var/local/autopilot//videos/autopilot.tests.functional.test_input_stack.TouchGesturesTests.test_pinch_gesture.ogv'] /var/local/autopilot/autopilot.log: 06:25:06.569 INFO __init__:162 - Launching process: ['/usr/bin/qmlscene', '-qt=qt5', '-testability', '/tmp/tmpyErdkz.qml'] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.717922] kernel BUG at /build/buildd/linux-3.12.0/drivers/gpu/drm/i915/i915_gem.c:4839! /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.736780] Modules linked in: bluetooth veth squashfs aufs nls_utf8 isofs xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc iptable_filter ip_tables x_tables x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw snd_hda_codec_hdmi gf128mul snd_hda_codec_realtek ablk_helper cryptd i915 drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit mxm_wmi mei_me snd_timer snd mei soundcore psmouse serio_raw joydev lpc_ich microcode wmi mac_hid video lp parport hid_generic usbhid hid e1000e ahci ptp libahci pps_core /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.822345] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0097.2012.1228.1346 12/28/2012 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.851440] EIP: 0060:[f901d776] EFLAGS: 00210246 CPU: 2 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.880754] EAX: e6b90270 EBX: e6b90270 ECX: ed4b4000 EDX: ed4b55e0 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.910940] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.941836] Stack: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.973256] e8921c00 00b4 00c0 e6b90294 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.005758] Call Trace: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.037812] [c130a8ec] ? _copy_from_user+0x2c/0x40 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.070637] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.104147] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.137652] [f8e2c430] ? drm_copy_field+0x70/0x70 [drm] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.171153] [c16561af] ? __do_page_fault+0x24f/0x530 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.204938] [c11826c0] SyS_ioctl+0x60/0x80 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.238719] Code: 39 50 f4 8d 48 cc 75 0a eb 1b 8d 76 00 39 50 f4 74 13 8b 41 34 39 c3 8d 48 cc 75 f1 b8 ff ff ff ff 5b 5d c3 90 8b 41 18 5b 5d c3 0f 0b 90 8d b4 26 00 00 00 00 55 89 e5 56 53 3e 8d 74 26 00 8b /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.367196] ---[ end trace d36900663c323dfa ]--- /var/local/autopilot/autopilot.log: 06:25:33.001 ERROR proxies:410 - Introspect error on :1.180:/com/canonical/Autopilot/Introspection: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. /var/local/autopilot/autopilot.log: 06:25:33.001 DEBUG proxies:413 - Executing introspect queue due to error /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:32 unity unknown:0 Failed to fetch xid: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity unknown:0 Failed to fetch type: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity unknown:0 Failed to fetch monitor: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:34 unity unknown:0 Failed to fetch maximized state: Timeout was reached
[Kernel-packages] [Bug 610306] Re: Big Kernel Lock
Linux kernel 2.6.39 removed the final part of the BKL, the whole BKL locking mechanism. BKL is now finally totally gone! Hooray! http://kernelnewbies.org/BigKernelLock -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/610306 Title: Big Kernel Lock Status in “linux” package in Ubuntu: Invalid Bug description: The Linux kernel still uses old Big Kernel Lock (BKL) a giant lock instead of fine-grained permissions. http://kernelnewbies.org/BigKernelLock http://en.wikipedia.org/wiki/Giant_lock To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/610306/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1253155] Re: Failure to validate module signature at boot time
I'm so sorry. This operation is my mistake. Status Fix Commited is right. But I can't rollback status. Somebody, could you change status? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1253155 Title: Failure to validate module signature at boot time Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Released Status in “linux” source package in Trusty: Fix Released Bug description: When booting under secureboot and using a signed kernel, it's expected that all modules shipped alongside the kernel should validate and load successfully without tainting the kernel. Unfortunately it doesn't seem to always be the case. Looking through my kernel logs, I see: Nov 15 10:35:24 castiana kernel: [1.635132] video: module verification failed: signature and/or required key missing - tainting kernel or Nov 12 12:58:48 castiana kernel: [213981.753326] Request for unknown module key 'Magrathea: Glacier signing key: f440a253eb498df923d438caa09b3b5d99308405' err -11 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.12.0-2-generic 3.12.0-2.7 ProcVersionSignature: Ubuntu 3.12.0-2.7-generic 3.12.0 Uname: Linux 3.12.0-2-generic x86_64 ApportVersion: 2.12.7-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stgraber 2721 F pulseaudio /dev/snd/controlC0: stgraber 2721 F pulseaudio /dev/snd/pcmC0D0c: stgraber 2721 F...m pulseaudio /dev/snd/pcmC0D0p: stgraber 2721 F...m pulseaudio CurrentDesktop: Unity Date: Wed Nov 20 11:59:57 2013 InstallationDate: Installed on 2013-04-21 (213 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130420) MachineType: LENOVO 2306CT0 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-2-generic.efi.signed root=UUID=14de4e20-b139-488e-863f-ec710f776851 ro quiet splash acpi_osi=!Windows 2012 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.12.0-2-generic N/A linux-backports-modules-3.12.0-2-generic N/A linux-firmware1.117 SourcePackage: linux StagingDrivers: zram UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/27/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET96WW (2.56 ) dmi.board.asset.tag: Not Available dmi.board.name: 2306CT0 dmi.board.vendor: LENOVO dmi.board.version: NO DPK dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET96WW(2.56):bd08/27/2013:svnLENOVO:pn2306CT0:pvrThinkPadX230:rvnLENOVO:rn2306CT0:rvrNODPK:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2306CT0 dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1253155/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1246670] Re: 14e4:4727 [Dell Inspiron 10z (1120)] Ubuntu 12.04.3 LTS: can't connect to WIFI
Sorry, this request is not feasible. This is the machine I'm working with every day: the costs and risks of the test you are asking for would be too high. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1246670 Title: 14e4:4727 [Dell Inspiron 10z (1120)] Ubuntu 12.04.3 LTS: can't connect to WIFI Status in “linux” package in Ubuntu: Incomplete Bug description: After the last updates I can't connect anymore to WIFI networks, including: - office wifi (WPA / WPA2 enterprise + PEAP) - public wifi from airport lounges, hotels, conferences. The notebook (dell inspiron) still detects the available newtorks. If they are protected, then additional data are requested (passwords and the like). So it seems that the wifi card is working well with the current driver (see below for further evidence). However, then the connection times out before getting any IP address. When I switch to Windows, I immediately get the connection (then the wifi network and the notebook's hardware are OK). Sometimes, when I switch back to Ubuntu, the connection starts spontaneously and I can work normally (as if the problem were in the DHCP protocol execution, and the Windows connection did some work that Ubuntu currently can't do). (further evidence that the driver is OK). I'm using the proprietary driver proposed by Ubuntu: This package contains Broadcom 802.11 Linux STA wireless driver for use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-, BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-based hardware. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: SB [HDA ATI SB], device 0: ALC259 Analog [ALC259 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: bonatti1690 F pulseaudio /dev/snd/controlC0: bonatti1690 F pulseaudio Card0.Amixer.info: Card hw:0 'SB'/'HDA ATI SB at 0xd040 irq 16' Mixer name : 'Realtek ALC259' Components : 'HDA:10ec0269,10280470,00100100' Controls : 18 Simple ctrls : 10 Card1.Amixer.info: Card hw:1 'HDMI'/'HDA ATI HDMI at 0xd011 irq 19' Mixer name : 'ATI RS690/780 HDMI' Components : 'HDA:1002791a,00791a00,0010' Controls : 4 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=8b9f8be8-b5ce-42d9-b311-de81faa160f6 InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) MachineType: Dell Inc. Inspiron 1120 MarkForUpload: True NonfreeKernelModules: wl Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-55-generic-pae root=UUID=891059fc-57ca-484c-941a-e405cd31b74e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.2.0-55.85-generic-pae 3.2.51 RelatedPackageVersions: linux-restricted-modules-3.2.0-55-generic-pae N/A linux-backports-modules-3.2.0-55-generic-pae N/A linux-firmware1.79.7 Tags: precise running-unity Uname: Linux 3.2.0-55-generic-pae i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lp lpadmin plugdev sambashare sudo dmi.bios.date: 07/26/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A03 dmi.board.asset.tag: 1234567890 dmi.board.name: 090DNY dmi.board.vendor: Dell Inc. dmi.board.version: A03 dmi.chassis.asset.tag: 1234567890 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A03 dmi.modalias: dmi:bvnDellInc.:bvrA03:bd07/26/2010:svnDellInc.:pnInspiron1120:pvrA03:rvnDellInc.:rn090DNY:rvrA03:cvnDellInc.:ct8:cvrA03: dmi.product.name: Inspiron 1120 dmi.product.version: A03 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1246670/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1199345] Re: Can't install on Hyper-V Server 2008 R2 SP1 (error video)
** Attachment added: openSUSE 13.1.png https://bugs.launchpad.net/ubuntu/saucy/+source/linux/+bug/1199345/+attachment/3930262/+files/openSUSE%2013.1.png -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1199345 Title: Can't install on Hyper-V Server 2008 R2 SP1 (error video) Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Committed Bug description: Microsoft Hyper-V Server 2008 R2 SP 1. Installing daily build 13.10 01.07.2013, 08.07.2013 and 09.07.2013. Have small resolution and error video in attach. --- ApportVersion: 2.9.2-0ubuntu8.4 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=ff4909f2-7a8e-41ef-8f6d-e946f0ab6cf4 InstallationDate: Installed on 2013-05-14 (119 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-30-generic N/A linux-backports-modules-3.8.0-30-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-30-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 1629-5805-2812-2971-2285-8339-49 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr090004:bd03/19/2009:svnMicrosoftCorporation:pnVirtualMachine:pvr7.0:rvnMicrosoftCorporation:rnVirtualMachine:rvr7.0:cvnMicrosoftCorporation:ct3:cvr7.0: dmi.product.name: Virtual Machine dmi.product.version: 7.0 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperVersion: 1.336 CurrentDmesg: [ 22.606704] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3 [ 28.730340] hv_storvsc vmbus_0_1: cmd 0x85 scsi status 0x2 srb status 0x4 DistroRelease: Ubuntu 13.10 IwConfig: lono wireless extensions. eth0 no wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130908) Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 hyperv_fb ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.11.0-5.11-generic 3.11.0 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-5-generic N/A linux-backports-modules-3.11.0-5-generic N/A linux-firmware1.113 RfKill: Tags: saucy Uname: Linux 3.11.0-5-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 9267-9079-0663-6021-2111-6164-80 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias:
[Kernel-packages] [Bug 1199345] Re: Can't install on Hyper-V Server 2008 R2 SP1 (error video)
Test CentOS 6.5 (error), Fedora 19 (no errors) and openSUSE 13.1 (nice, but some errors). ** Attachment added: CentOS 6.5.png https://bugs.launchpad.net/ubuntu/saucy/+source/linux/+bug/1199345/+attachment/3930260/+files/CentOS%206.5.png -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1199345 Title: Can't install on Hyper-V Server 2008 R2 SP1 (error video) Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Committed Bug description: Microsoft Hyper-V Server 2008 R2 SP 1. Installing daily build 13.10 01.07.2013, 08.07.2013 and 09.07.2013. Have small resolution and error video in attach. --- ApportVersion: 2.9.2-0ubuntu8.4 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=ff4909f2-7a8e-41ef-8f6d-e946f0ab6cf4 InstallationDate: Installed on 2013-05-14 (119 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-30-generic N/A linux-backports-modules-3.8.0-30-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-30-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 1629-5805-2812-2971-2285-8339-49 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr090004:bd03/19/2009:svnMicrosoftCorporation:pnVirtualMachine:pvr7.0:rvnMicrosoftCorporation:rnVirtualMachine:rvr7.0:cvnMicrosoftCorporation:ct3:cvr7.0: dmi.product.name: Virtual Machine dmi.product.version: 7.0 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperVersion: 1.336 CurrentDmesg: [ 22.606704] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3 [ 28.730340] hv_storvsc vmbus_0_1: cmd 0x85 scsi status 0x2 srb status 0x4 DistroRelease: Ubuntu 13.10 IwConfig: lono wireless extensions. eth0 no wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130908) Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 hyperv_fb ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.11.0-5.11-generic 3.11.0 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-5-generic N/A linux-backports-modules-3.11.0-5-generic N/A linux-firmware1.113 RfKill: Tags: saucy Uname: Linux 3.11.0-5-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 9267-9079-0663-6021-2111-6164-80 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias:
[Kernel-packages] [Bug 1261308] Re: Intel ivy bridge crash on a CI machine executing autopilot tests
** Tags removed: ci -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261308 Title: Intel ivy bridge crash on a CI machine executing autopilot tests Status in “linux” package in Ubuntu: Confirmed Bug description: A following crash was gotten in CI when running autopilot tests: /var/local/autopilot/autopilot.log: 06:25:06.559 DEBUG globals:155 - Starting: ['/usr/bin/recordmydesktop', '--fps=6', '--no-wm-check', '--no-sound', '--no-frame', '-o', '/var/local/autopilot//videos/autopilot.tests.functional.test_input_stack.TouchGesturesTests.test_pinch_gesture.ogv'] /var/local/autopilot/autopilot.log: 06:25:06.569 INFO __init__:162 - Launching process: ['/usr/bin/qmlscene', '-qt=qt5', '-testability', '/tmp/tmpyErdkz.qml'] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.717922] kernel BUG at /build/buildd/linux-3.12.0/drivers/gpu/drm/i915/i915_gem.c:4839! /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.736780] Modules linked in: bluetooth veth squashfs aufs nls_utf8 isofs xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc iptable_filter ip_tables x_tables x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw snd_hda_codec_hdmi gf128mul snd_hda_codec_realtek ablk_helper cryptd i915 drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit mxm_wmi mei_me snd_timer snd mei soundcore psmouse serio_raw joydev lpc_ich microcode wmi mac_hid video lp parport hid_generic usbhid hid e1000e ahci ptp libahci pps_core /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.822345] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0097.2012.1228.1346 12/28/2012 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.851440] EIP: 0060:[f901d776] EFLAGS: 00210246 CPU: 2 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.880754] EAX: e6b90270 EBX: e6b90270 ECX: ed4b4000 EDX: ed4b55e0 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.910940] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.941836] Stack: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.973256] e8921c00 00b4 00c0 e6b90294 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.005758] Call Trace: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.037812] [c130a8ec] ? _copy_from_user+0x2c/0x40 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.070637] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.104147] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.137652] [f8e2c430] ? drm_copy_field+0x70/0x70 [drm] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.171153] [c16561af] ? __do_page_fault+0x24f/0x530 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.204938] [c11826c0] SyS_ioctl+0x60/0x80 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.238719] Code: 39 50 f4 8d 48 cc 75 0a eb 1b 8d 76 00 39 50 f4 74 13 8b 41 34 39 c3 8d 48 cc 75 f1 b8 ff ff ff ff 5b 5d c3 90 8b 41 18 5b 5d c3 0f 0b 90 8d b4 26 00 00 00 00 55 89 e5 56 53 3e 8d 74 26 00 8b /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.367196] ---[ end trace d36900663c323dfa ]--- /var/local/autopilot/autopilot.log: 06:25:33.001 ERROR proxies:410 - Introspect error on :1.180:/com/canonical/Autopilot/Introspection: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. /var/local/autopilot/autopilot.log: 06:25:33.001 DEBUG proxies:413 - Executing introspect queue due to error /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:32 unity unknown:0 Failed to fetch xid: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity unknown:0 Failed to fetch type: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity unknown:0 Failed to fetch monitor: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:34 unity unknown:0 Failed to fetch maximized state: Timeout was reached /home
[Kernel-packages] [Bug 1254581] Re: USB stops working after a while
Since someone mentioned USB3 hard drives, this is some info I can add. I am having USB related problems with a USB-3 RAID hard drive in 12.04.3 LTS - kenel 3.5.0-32-generic. I have a USB external hard drive and all was fine until a few month's ago when I started getting USB disconnect a few minutes after plugging the device or rebooting the system (Ex: usb 1-7: USB disconnect, device number 18). From my investigation so far the problem seems to have started 31 October 2013 and now I believe since a specific update: Start-Date: 2013-10-30 23:33:59 Commandline: aptdaemon role='role-commit-packages' sender=':1.21820' Upgrade: upower:i386 (0.9.15-3git1, 0.9.15-3git1ubuntu0.1), libdecoration0:i386 (0.9.7.12-0ubuntu2, 0.9.7.12-0ubuntu3), libupower-glib1:i386 (0.9.15-3git1, 0.9.15-3git1ubuntu0.1), fire fox-globalmenu:i386 (24.0+build1-0ubuntu0.12.04.1, 25.0+build3-0ubuntu0.12.04.1), compiz-plugins-default:i386 (0.9.7.12-0ubuntu2, 0.9.7.12-0ubuntu3), firefox:i386 (24.0+build1-0ubuntu0 .12.04.1, 25.0+build3-0ubuntu0.12.04.1), gir1.2-upowerglib-1.0:i386 (0.9.15-3git1, 0.9.15-3git1ubuntu0.1), firefox-locale-en:i386 (24.0+build1-0ubuntu0.12.04.1, 25.0+build3-0ubuntu0.12 .04.1), firefox-locale-pt:i386 (24.0+build1-0ubuntu0.12.04.1, 25.0+build3-0ubuntu0.12.04.1), compiz:i386 (0.9.7.12-0ubuntu2, 0.9.7.12-0ubuntu3), compiz-core:i386 (0.9.7.12-0ubuntu2, 0. 9.7.12-0ubuntu3), compiz-gnome:i386 (0.9.7.12-0ubuntu2, 0.9.7.12-0ubuntu3) End-Date: 2013-10-30 23:34:11 Probably upower related? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1254581 Title: USB stops working after a while Status in System76: Triaged Status in “linux” package in Ubuntu: Incomplete Bug description: After leaving my workstation for a while, and then returning, my USB keyboard and USB mouse stop working. Actually, all USB ports stop working. The peripherals are plugged into the USB hub on my monitor. When I return, and the monitor wakes up, USB is dead. Plugging them into other USB ports has no effect. As far as I can tell, the only way to fix this is to reboot. Is there a better workaround, like removing and reinserting a kernel module? I tried this with ahci, but it gives me Error: Module ahci is in use. Having to reboot every time is quite bothersome. Here's what may be useful from the syslog: Nov 24 14:41:02 snake kernel: [108346.613267] xhci_hcd :00:14.0: Timeout while waiting for address device command Nov 24 14:41:07 snake kernel: [108351.815323] xhci_hcd :00:14.0: Timeout while waiting for address device command Nov 24 14:41:08 snake kernel: [108352.019314] usb 3-1.4: device not accepting address 112, error -62 Nov 24 14:41:08 snake kernel: [108352.103502] usb 3-1.4: new high-speed USB device number 113 using xhci_hcd Nov 24 14:41:12 snake whoopsie[1274]: online Nov 24 14:41:13 snake kernel: [108357.101470] xhci_hcd :00:14.0: Timeout while waiting for address device command Nov 24 14:41:18 snake kernel: [108362.303556] xhci_hcd :00:14.0: Timeout while waiting for address device command Nov 24 14:41:18 snake kernel: [108362.507519] usb 3-1.4: device not accepting address 113, error -62 Nov 24 14:41:24 snake kernel: [108368.513290] xhci_hcd :00:14.0: xHCI host not responding to stop endpoint command. Nov 24 14:41:24 snake kernel: [108368.513301] xhci_hcd :00:14.0: Assuming host is dying, halting host. Nov 24 14:41:24 snake kernel: [108368.513347] Bluetooth: hci0 urb 880403ba5540 failed to resubmit (22) Nov 24 14:41:24 snake kernel: [108368.513356] Bluetooth: hci0 urb 880403ba5e40 failed to resubmit (22) Nov 24 14:41:24 snake kernel: [108368.513362] Bluetooth: hci0 urb 880403e466c0 failed to resubmit (22) Nov 24 14:41:24 snake kernel: [108368.513384] hub 3-1:1.0: cannot disable port 4 (err = -110) Nov 24 14:41:24 snake kernel: [108368.513390] xhci_hcd :00:14.0: HC died; cleaning up Nov 24 14:41:29 snake kernel: [108373.511466] xhci_hcd :00:14.0: Timeout while waiting for a slot Nov 24 14:41:29 snake kernel: [108373.511475] xhci_hcd :00:14.0: Abort the command ring, but the xHCI is dead. Nov 24 14:41:29 snake kernel: [108373.511498] xHCI xhci_free_dev called with unaddressed device Nov 24 14:41:34 snake kernel: [108378.509722] xhci_hcd :00:14.0: Timeout while waiting for a slot Nov 24 14:41:34 snake kernel: [108378.509732] xhci_hcd :00:14.0: Abort the command ring, but the xHCI is dead. Nov 24 14:41:34 snake kernel: [108378.509754] xHCI xhci_free_dev called with unaddressed device Nov 24 14:41:34 snake kernel: [108378.509792] usb 3-1: USB disconnect, device number 109 Nov 24 14:41:34 snake kernel: [108378.509797] usb 3-1.1: USB disconnect, device number 110 Nov 24 14:41:34 snake kernel: [108378.542604] usb 3-1.2: USB disconnect, device number 111 Nov 24 14:41:34
[Kernel-packages] [Bug 1245938] Re: Intel x520 NIC's (ixgbe) stop working in 12.10, 13.04, 13.10
I can confirm the same behaviour on a Dell r815 with a Intel x520 network card. They work fine with the 3.2 kernel but not with the current 3.8 one in Ubuntu. @Joseph: I was not able to boot from your 3.13 kernel from this source: http://kernel.ubuntu.com/~jsalisbury/lp1245938 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1245938 Title: Intel x520 NIC's (ixgbe) stop working in 12.10, 13.04, 13.10 Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Quantal: Confirmed Status in “linux” source package in Raring: Confirmed Status in “linux” source package in Saucy: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have a server (Dell R715) with two Intel x520 NIC's. If we run Ubuntu 12.04 on it, the NIC's works flawlessly (with stock kernel driver or with Intel compiled one), but if we upgrade release to 12.10, 13.04 or 13.10, the NIC's stop working: either stock or Intel drivers fails with error: [ 226.395766] Intel(R) 10 Gigabit PCI Express Network Driver - version 3.18.7 [ 226.395770] Copyright (c) 1999-2013 Intel Corporation. [ 226.395980] ixgbe: probe of :22:00.0 failed with error -5 [ 226.396092] ixgbe: probe of :22:00.1 failed with error -5 [ 226.396203] ixgbe: probe of :23:00.0 failed with error -5 [ 226.396311] ixgbe: probe of :23:00.1 failed with error -5 I contacted Intel developers and they responded: Hey Fernando, We (ixgbe) only returns EIO (error 5) for a couple of reasons. 1) When we fail to io map (ioremap) 2) If the eeprom checksum is incorrect. 3) If the MAC address from the checksum is invalid Reasons 2 and 3 are related to the NIC's eeprom so if they worked with another system they should still be fine now. If you really wanted to verify you could try out the NIC's on a known good system again to see if the eeprom somehow got corrupted. That pretty much leaves us with ioremap returning an error. I'm not at all sure why your Ubuntu release would not like the way we are calling ioremap, but it might give you a place to start looking in Ubuntu changes. Thanks, -Don If the server boot with kernel 3.2.0-55 (from grub menu) both NIC's works fine. Please let me know how can I help! Regards Fernando To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245938/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1230135] Re: [Dell Inc. Dell System XPS L322X] suspend/resume failure
The nasty crashes with disk-related messages disappeared a few weeks after I filed the report. Now suspend/resume is back to being almost reliable with maybe 1 out of 10 resumes crashing (with no identifiable cause). So this report can be closed. Thanks. ** Changed in: linux (Ubuntu) Status: Expired = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1230135 Title: [Dell Inc. Dell System XPS L322X] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: This laptop very often fails to resume from suspend (maybe 1/3 of the resumes fail) - often giving disk-related errors on the screen before freezing. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-8-generic 3.11.0-8.15 ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 Uname: Linux 3.11.0-8-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: anders 2333 F pulseaudio Date: Wed Sep 25 09:40:10 2013 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=61b767b9-73b3-41a3-b4bb-c7c2f757b7f0 InstallationDate: Installed on 2013-05-03 (144 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 InterpreterPath: /usr/bin/python3.3 MachineType: Dell Inc. Dell System XPS L322X MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-8-generic root=UUID=bbf4bad6-5b8e-4b76-b529-47fb97c9d021 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 SourcePackage: linux Title: [Dell Inc. Dell System XPS L322X] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-09-22 (2 days ago) UserGroups: dmi.bios.date: 01/22/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0PJHXN dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA07:bd01/22/2013:svnDellInc.:pnDellSystemXPSL322X:pvr:rvnDellInc.:rn0PJHXN:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Dell System XPS L322X dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1230135/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 741391] Re: coretemp driver doesn't support Intel Clarkdale and Arrandale CPUs (i3/i5/Pentium G6950)
Since 10.04 is no longer supported and the bug was fixed in kernel 2.6.35, which is older than the kernel in 12.04, I think this issue is now obsolete. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/741391 Title: coretemp driver doesn't support Intel Clarkdale and Arrandale CPUs (i3/i5/Pentium G6950) Status in The Linux Kernel: Fix Released Status in “linux” package in Ubuntu: Incomplete Bug description: # modprobe coretemp coretemp: Unknown CPU model 25 Patched in upstream kernel: https://bugzilla.kernel.org/show_bug.cgi?id=15348 ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-29-generic-pae 2.6.32-29.58 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-29.58-generic-pae 2.6.32.28+drm33.13 Uname: Linux 2.6.32-29-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC663 Analog [ALC663 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: chris 1578 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf042 irq 22' Mixer name : 'Intel G45 DEVIBX' Components : 'HDA:10ec0663,1734118c,0011 HDA:80862804,80860101,0010' Controls : 33 Simple ctrls : 18 Date: Thu Mar 24 01:04:07 2011 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=a8e4fc1f-8450-461f-8867-6fa21c67a553 IwConfig: lono wireless extensions. eth0 no wireless extensions. vboxnet0 no wireless extensions. MachineType: FUJITSU ESPRIMO P9900 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-29-generic-pae root=/dev/mapper/Group1-Lucid_Root ro quiet splash ProcEnviron: PATH=(custom, user) LANG=en_GB.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34.4 RfKill: SourcePackage: linux dmi.bios.date: 08/18/2010 dmi.bios.vendor: FUJITSU // Phoenix Technologies Ltd. dmi.bios.version: 6.00 R1.20.2912.A1 dmi.board.name: D2912-A1 dmi.board.vendor: FUJITSU dmi.board.version: S26361-D2912-A1 dmi.chassis.type: 6 dmi.chassis.vendor: FUJITSU dmi.chassis.version: C$PIP4 dmi.modalias: dmi:bvnFUJITSU//PhoenixTechnologiesLtd.:bvr6.00R1.20.2912.A1:bd08/18/2010:svnFUJITSU:pnESPRIMOP9900:pvr:rvnFUJITSU:rnD2912-A1:rvrS26361-D2912-A1:cvnFUJITSU:ct6:cvrC$PIP4: dmi.product.name: ESPRIMO P9900 dmi.sys.vendor: FUJITSU To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/741391/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 734996] Re: [Dell Vostro 3400] Cannot access the text console.
The text console was accessible in 10.04.4 LTS and 10.10. In 9.10, the screen went blank with backlight on after isolinux. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/734996 Title: [Dell Vostro 3400] Cannot access the text console. Status in “linux” package in Ubuntu: Incomplete Bug description: During a booting process, there should a kubuntu logo with 5 blinking dots since I am using Kubuntu. But it shows a black screen instead after loading the kernel and before Xorg started. Disabling modeset can get back the boot splash but lost accelerated 3D. After Xorg loaded, it shows a normal composited desktop with full hardware acceleration. But pressing Ctrl+Alt+F1 will hide the mouse cursor and cause the screen to freeze. Pressing Ctrl+Alt+7 can switch back to Xorg. It is also true for live DVD or a fully updated(as of today) system. WORKAROUND: I get back the text console by doing the following: 1) Blacklist nouveau 2) Rename /lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko to something else. 3) sudo update-initramfs -k all -u 4) sudo update-grub2 5) Reboot. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-6-generic 2.6.38-6.34 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.38-6.34-generic 2.6.38-rc7 Uname: Linux 2.6.38-6-generic x86_64 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pkduck 1513 F pulseaudio /dev/snd/pcmC0D0c: pkduck 1513 F...m pulseaudio /dev/snd/pcmC0D0p: pkduck 1513 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfb40 irq 48' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,10280440,00100105' Controls : 14 Simple ctrls : 9 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xfa08 irq 16' Mixer name : 'Nvidia GPU 0b HDMI/DP' Components : 'HDA:10de000b,10de0101,00100100' Controls : 16 Simple ctrls : 4 Date: Tue Mar 15 01:55:25 2011 HibernationDevice: RESUME=UUID=9ae7919b-4723-47c8-ad54-618575be1235 InstallationMedia: Kubuntu 11.04 Natty Narwhal - Alpha amd64 (20110303) MachineType: Dell Inc. Vostro 3400 ProcEnviron: LANGUAGE= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-6-generic root=UUID=ac177ace-fa7e-48ae-b159-9294925b4e89 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-6-generic N/A linux-backports-modules-2.6.38-6-generic N/A linux-firmware1.48 SourcePackage: linux StagingDrivers: brcm80211 Title: [STAGING] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/21/2010:svnDellInc.:pnVostro3400:pvrNotSpecified:rvnDellInc.:rn0RXV7H:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Vostro 3400 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.12.7-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: pkduck 1419 F pulseaudio /dev/snd/controlC0: pkduck 1419 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2013-12-15 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131215) MachineType: Dell Inc. Vostro 3400 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-7-generic root=UUID=0260376b-5122-4d52-be39-576de2d88f1b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 RelatedPackageVersions: linux-restricted-modules-3.12.0-7-generic N/A linux-backports-modules-3.12.0-7-generic N/A linux-firmware1.117 Tags: trusty Uname: Linux 3.12.0-7-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8
[Kernel-packages] [Bug 1257539] Re: linux-armadaxp: 3.2.0-1629.41 -proposed tracker
** Changed in: kernel-sru-workflow/regression-testing Status: Confirmed = In Progress ** Changed in: kernel-sru-workflow/regression-testing Assignee: Canonical Platform QA Team (canonical-platform-qa) = Parameswaran Sivatharman (psivaa) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1257539 Title: linux-armadaxp: 3.2.0-1629.41 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: In Progress Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Fix Released Status in Kernel SRU Workflow verification-testing series: Fix Released Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-armadaxp” source package in Precise: In Progress Bug description: This bug is for tracking the 3.2.0-1629.41 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 04. December 2013 00:26 UTC kernel-stable-master-bug:1257370 kernel-stable-Certification-testing-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Security-signoff-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Prepare-package-end:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-start:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-end:Thursday, 05. December 2013 19:05 UTC kernel-stable-Verification-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-Regression-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 06. December 2013 01:04 UTC kernel-stable-Verification-testing-end:Friday, 06. December 2013 01:04 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1257539/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1252945] Re: [HP Pavilion 15-e010ax Notebook PC] Unable to install Saucy
brianM, I would send it to both mailing lists (DRM DRIVERS and RADEON FRAMEBUFFER DISPLAY DRIVER), and CC both Alex Deucher alexander.deuc...@amd.com and Christian König christian.koe...@amd.com . -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1252945 Title: [HP Pavilion 15-e010ax Notebook PC] Unable to install Saucy Status in “linux” package in Ubuntu: Triaged Bug description: Tried to install U13.10 using the desktop installer on HP 15e010ax laptop. Goes thru splash screen to freeze with a black screen with no cursor. Unable to access terminal. Was using uefi boot with secure boot disabled. This is a regression as U13.04 works on this machine and has been used to gather the debug info attached due no terminal access in 13.10. This occurs when trying to boot to live session or straight to install. Appears installer cannot set up a satisfactory default video driver for this machine. Note VESA: KALINDI works on 13.04 and probably should in 13.10. WORKAROUND: I installed saucy in this machine by a partition copy from another working pc. Found that a recovery boot works and installs video driver vesa:kalindi. Also installing fglrx works. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-33-generic 3.8.0-33.48 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brian 1918 F pulseaudio /dev/snd/controlC0: brian 1918 F pulseaudio CRDA: country AU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (3, 23) (5250 - 5330 @ 40), (3, 23), DFS (5735 - 5835 @ 40), (3, 30) Date: Wed Nov 20 14:35:58 2013 HibernationDevice: RESUME=UUID=5aed68e6-feb5-4218-8672-ac3a1790bbbe InstallationDate: Installed on 2013-11-18 (1 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC MarkForUpload: True ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-33-generic root=UUID=560ad8b8-e23f-4108-a24c-7e2bed8a81a6 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.8.0-33-generic N/A linux-backports-modules-3.8.0-33-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/27/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 213A dmi.board.vendor: Hewlett-Packard dmi.board.version: 02.12 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.22:bd09/27/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr088410305A1620100:rvnHewlett-Packard:rn213A:rvr02.12:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion 15 Notebook PC dmi.product.version: 088410305A1620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1252945/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 750164] Re: WARNING: at /build/buildd/linux-2.6.38/lib/kref.c:34 kref_get+0x2d/0x30()
Hospik, this bug report is being closed due to your last comment https://bugs.launchpad.net/ubuntu/+source/linux/+bug/750164/comments/3 regarding this being fixed with an update. For future reference you can manage the status of your own bugs by clicking on the current status in the yellow line and then choosing a new status in the revealed drop down box. You can learn more about bug statuses at https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time to report this bug and helping to make Ubuntu better. Please submit any future bugs you may find. ** Changed in: linux (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/750164 Title: WARNING: at /build/buildd/linux-2.6.38/lib/kref.c:34 kref_get+0x2d/0x30() Status in “linux” package in Ubuntu: Invalid Bug description: Bug report on resume, no notable effects. ProblemType: KernelOops DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-7-generic 2.6.38-7.39 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.38-7.39-generic 2.6.38 Uname: Linux 2.6.38-7-generic x86_64 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Annotation: Your system might become unstable now and might need to be restarted. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jacco 1952 F xfce4-volumed jacco 1963 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xe8024000 irq 47' Mixer name : 'Analog Devices AD1981' Components : 'HDA:11d41981,103c30c5,00100200' Controls : 11 Simple ctrls : 9 Date: Mon Apr 4 12:50:20 2011 Failure: oops Frequency: This has only happened once. HibernationDevice: RESUME=UUID=a4f7e2ae-a65f-44b2-8587-2ebc1be7d3b1 MachineType: Hewlett-Packard HP Compaq 8510w PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic root=UUID=adda56bd-2013-47cc-adb1-65d29d6a9406 ro vga=792 quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-7-generic N/A linux-backports-modules-2.6.38-7-generic N/A linux-firmware1.49 SourcePackage: linux Title: WARNING: at /build/buildd/linux-2.6.38/lib/kref.c:34 kref_get+0x2d/0x30() UpgradeStatus: Upgraded to natty on 2011-04-01 (2 days ago) WpaSupplicantLog: dmi.bios.date: 08/19/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68MVD Ver. F.14 dmi.board.name: 30C5 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 71.36 dmi.chassis.asset.tag: CNU8375YWF dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68MVDVer.F.14:bd08/19/2008:svnHewlett-Packard:pnHPCompaq8510w:pvrF.14:rvnHewlett-Packard:rn30C5:rvrKBCVersion71.36:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq 8510w dmi.product.version: F.14 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/750164/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1208257] Re: [HP ProBook 4540s] brightness control problems
prathik, so your hardware may be tracked, could you please file a new report by executing the following in a terminal while booted into a Ubuntu repository kernel (not a mainline one) via: ubuntu-bug linux For more on this, please read the official Ubuntu documentation: Ubuntu Bug Control and Ubuntu Bug Squad: https://wiki.ubuntu.com/Bugs/BestPractices#X.2BAC8-Reporting.Focus_on_One_Issue Ubuntu Kernel Team: https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies#Filing_Kernel_Bug_reports Ubuntu Community: https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette When opening up the new report, please feel free to subscribe me to it. Thank you for your understanding. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1208257 Title: [HP ProBook 4540s] brightness control problems Status in “linux” package in Ubuntu: Incomplete Status in “linux” package in Baltix: Triaged Bug description: I bought a laptop in December 2012, immediately tried to put Ubuntu 12.10, got broken wi-fi and non-working graphics acceleration. Updated kernel to version 3.6, with graphic acceleration was all right, even partially earned wi-fi. After some time wi-fi hang, helped only restart the network subsystem. Updated kernel to 3.7, with the wi-fi was all became normal, but stopped working brightness control with the Fn keys. Progress bar indicates that the brightness changes, but in fact nothing happens. Tried the new distribution 13.04, on 3.8 kernels, 3.9, 3.10, nothing changes. Upon adjustment has broken in 3.7 kernel. It turns out that this is a regression. WORKAROUND: Problem gone with kernel parameter acpi_backlight=vendor. --- ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: country UA: (2402 - 2482 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-08-04 (0 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=f5b4658c-870e-449d-a9d7-5caaa6eec2f3 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.1E dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.41:bd05/20/2013:svnHewlett-Packard:pnHPProBook4540s:pvrA1018C1100:rvnHewlett-Packard:rn17F6:rvrKBCVersion58.1E:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4540s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3887 F pulseaudio ubuntu14062 F pulseaudio CRDA: country UA: (2400 - 2483 @ 40), (N/A, 20), NO-OUTDOOR (5150 - 5350 @ 40), (N/A, 20), NO-OUTDOOR (57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha amd64 (20130807) MachineType: Hewlett-Packard HP ProBook 4540s MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper persistent initrd=/casper/initrd.lz splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3 RelatedPackageVersions: linux-restricted-modules-3.10.0-6-generic N/A linux-backports-modules-3.10.0-6-generic N/A linux-firmware1.113 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: saucy Uname: Linux 3.10.0-6-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/20/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.41 dmi.board.name: 17F6 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version
[Kernel-packages] [Bug 1199345] Re: Can't install on Hyper-V Server 2008 R2 SP1 (error video)
CSRedRat, if you want to pursue fixes for CentOS and openSUSE, you would want to submit bug reports to their respective bug trackers. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1199345 Title: Can't install on Hyper-V Server 2008 R2 SP1 (error video) Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Committed Bug description: Microsoft Hyper-V Server 2008 R2 SP 1. Installing daily build 13.10 01.07.2013, 08.07.2013 and 09.07.2013. Have small resolution and error video in attach. --- ApportVersion: 2.9.2-0ubuntu8.4 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=ff4909f2-7a8e-41ef-8f6d-e946f0ab6cf4 InstallationDate: Installed on 2013-05-14 (119 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release i386 (20130424) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-30-generic N/A linux-backports-modules-3.8.0-30-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-30-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 1629-5805-2812-2971-2285-8339-49 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr090004:bd03/19/2009:svnMicrosoftCorporation:pnVirtualMachine:pvr7.0:rvnMicrosoftCorporation:rnVirtualMachine:rvr7.0:cvnMicrosoftCorporation:ct3:cvr7.0: dmi.product.name: Virtual Machine dmi.product.version: 7.0 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperVersion: 1.336 CurrentDmesg: [ 22.606704] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3 [ 28.730340] hv_storvsc vmbus_0_1: cmd 0x85 scsi status 0x2 srb status 0x4 DistroRelease: Ubuntu 13.10 IwConfig: lono wireless extensions. eth0 no wireless extensions. LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Alpha i386 (20130908) Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 hyperv_fb ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.11.0-5.11-generic 3.11.0 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-5-generic N/A linux-backports-modules-3.11.0-5-generic N/A linux-firmware1.113 RfKill: Tags: saucy Uname: Linux 3.11.0-5-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 9267-9079-0663-6021-2111-6164-80 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias:
[Kernel-packages] [Bug 734996] Re: [Dell Vostro 3400] Cannot access the text console.
PKduck, the next step is to fully commit bisect from 10.10 to 11.04, in order to identify the offending commit. Could you please do this following https://wiki.ubuntu.com/Kernel/KernelBisection ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/734996 Title: [Dell Vostro 3400] Cannot access the text console. Status in “linux” package in Ubuntu: Incomplete Bug description: During a booting process, there should a kubuntu logo with 5 blinking dots since I am using Kubuntu. But it shows a black screen instead after loading the kernel and before Xorg started. Disabling modeset can get back the boot splash but lost accelerated 3D. After Xorg loaded, it shows a normal composited desktop with full hardware acceleration. But pressing Ctrl+Alt+F1 will hide the mouse cursor and cause the screen to freeze. Pressing Ctrl+Alt+7 can switch back to Xorg. It is also true for live DVD or a fully updated(as of today) system. WORKAROUND: I get back the text console by doing the following: 1) Blacklist nouveau 2) Rename /lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko to something else. 3) sudo update-initramfs -k all -u 4) sudo update-grub2 5) Reboot. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-6-generic 2.6.38-6.34 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.38-6.34-generic 2.6.38-rc7 Uname: Linux 2.6.38-6-generic x86_64 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pkduck 1513 F pulseaudio /dev/snd/pcmC0D0c: pkduck 1513 F...m pulseaudio /dev/snd/pcmC0D0p: pkduck 1513 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfb40 irq 48' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,10280440,00100105' Controls : 14 Simple ctrls : 9 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xfa08 irq 16' Mixer name : 'Nvidia GPU 0b HDMI/DP' Components : 'HDA:10de000b,10de0101,00100100' Controls : 16 Simple ctrls : 4 Date: Tue Mar 15 01:55:25 2011 HibernationDevice: RESUME=UUID=9ae7919b-4723-47c8-ad54-618575be1235 InstallationMedia: Kubuntu 11.04 Natty Narwhal - Alpha amd64 (20110303) MachineType: Dell Inc. Vostro 3400 ProcEnviron: LANGUAGE= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-6-generic root=UUID=ac177ace-fa7e-48ae-b159-9294925b4e89 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-6-generic N/A linux-backports-modules-2.6.38-6-generic N/A linux-firmware1.48 SourcePackage: linux StagingDrivers: brcm80211 Title: [STAGING] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/21/2010:svnDellInc.:pnVostro3400:pvrNotSpecified:rvnDellInc.:rn0RXV7H:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Vostro 3400 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.12.7-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: pkduck 1419 F pulseaudio /dev/snd/controlC0: pkduck 1419 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2013-12-15 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131215) MachineType: Dell Inc. Vostro 3400 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-7-generic root=UUID=0260376b-5122-4d52-be39-576de2d88f1b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 RelatedPackageVersions: linux-restricted-modules-3.12.0-7-generic N/A linux-backports-modules-3.12.0-7-generic N/A linux-firmware1.117 Tags: trusty Uname: Linux 3.12.0-7-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H
[Kernel-packages] [Bug 605686] Re: nointremap needed - Blocked an interrupt request due to source-id verificiation failure
Dave Gilbert, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: bios-outdated-2.30 ** Tags added: precise ** Description changed: - Machine works fine on latest 2.6.32 in lucid, fails to boot with black - screen on todays Maverick 2.6.35-7-generic #12-Ubuntu - - It's an i7-860 on ASRock P55M Pro motherboard with ATI HD4350 graphics. - - From grub if I remove the load_video and set gfxpayload=keep I see the content shown in the attached jpg - which is the tail end of a crash, from within check_timer and I see a - + Machine works fine on latest 2.6.32 in lucid, fails to boot with black screen on todays Maverick 2.6.35-7-generic #12-Ubuntu. From grub if I remove the load_video and set gfxpayload=keep I see the content shown in the attached jpg which is the tail end of a crash, from within check_timer and I see a: INTR-REMAP:[fault reason 38] Blocked an interrupt request due to source-id verification failure Kernel panic - not syncing: timer doesn't work through Interrupt remapped IO-APIC - Removing the quiet and splash by themselves didn't help. nomodeset didn't help. - Removing the netconsole line I've got didn't help either - adding nointremap gets me booting. The Lucid 2.6.32 still boots. - - My current booting command line is: - - BOOT_IMAGE=/boot/vmlinuz-2.6.35-7-generic root=UUID=d8314979-8ace-401c- - 88df-728ad6b89cb5 ro ignore_loglevel - netconsole=@192.168.66.33/eth0,514@192.168.66.25/00:a0:d1:63:68:a6 - nointremap + Removing the quiet and splash by themselves didn't help. nomodeset didn't help. Removing the netconsole line I've got didn't help either - adding nointremap gets me booting. The Lucid 2.6.32 still boots. My current booting command line is: + BOOT_IMAGE=/boot/vmlinuz-2.6.35-7-generic root=UUID=d8314979-8ace-401c-88df-728ad6b89cb5 ro ignore_loglevel netconsole=@192.168.66.33/eth0,514@192.168.66.25/00:a0:d1:63:68:a6 nointremap I've also extracted the acpidump/dmar : - acpidump --table DMAR -b dmar.out - that gives - Wrong checksum for generic table! + that gives Wrong checksum for generic table, but gives the output; and I + then used iasl to pull that apart - output also attached. - but gives the output; and I then used iasl to pull that apart - output - also attached. - - Dave + WORKAROUND: + https://bugs.launchpad.net/ubuntu/+source/linux/+bug/605686/+attachment/1456378/+files + /intremap-hack.patch ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-7-generic 2.6.35-7.12 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.35-7.12-generic 2.6.35-rc4 Uname: Linux 2.6.35-7-generic x86_64 AcpiTables: Error: [Errno 13] Permission denied AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: - List of CAPTURE Hardware Devices - card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog] -Subdevices: 2/2 -Subdevice #0: subdevice #0 -Subdevice #1: subdevice #1 + List of CAPTURE Hardware Devices + card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog] + Subdevices: 2/2 + Subdevice #0: subdevice #0 + Subdevice #1: subdevice #1 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: dg
[Kernel-packages] [Bug 604630] Re: boot sequence no longer honors SHM_SIZE set in /etc/defaults/tmpfs
Nicholas J. Fiorello Jr., this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: bios-outdated-1006 ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/604630 Title: boot sequence no longer honors SHM_SIZE set in /etc/defaults/tmpfs Status in “linux” package in Ubuntu: Incomplete Bug description: Under 9.04 and before, initial size of /dev/shm could be modified as documented in /etc/default/tmpfs For 9.10 and 10.04 however this setting has no effect. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-23-generic 2.6.32-23.37 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5 Uname: Linux 2.6.32-23-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nick 1120 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf7eb8000 irq 16' Mixer name : 'Realtek ALC662 rev1' Components : 'HDA:10ec0662,10438337,00100101' Controls : 17 Simple ctrls : 10 Date: Mon Jul 12 10:10:53 2010 HibernationDevice: RESUME=UUID=c8f2-a987-4486-babc-65025576d269 InstallationMedia: Ubuntu-Netbook 10.04 Lucid Lynx - Release i386 (20100429.4) MachineType: ASUSTeK Computer INC. 900 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=67be1c38-1c32-4164-9dc8-7801a0f49226 ro quiet splash ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34.1 SourcePackage: linux dmi.bios.date: 09/11/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0906 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 900 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: x.xx dmi.chassis.asset.tag: 0x dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTek Computer INC. dmi.chassis.version: x.x dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0906:bd09/11/2008:svnASUSTeKComputerINC.:pn900:pvr0501:rvnASUSTeKComputerINC.:rn900:rvrx.xx:cvnASUSTekComputerINC.:ct10:cvrx.x: dmi.product.name: 900 dmi.product.version: 0501 dmi.sys.vendor: ASUSTeK Computer INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/604630/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 603208] Re: kernel panic upon deleting old (2.6.35.6.9) generic image
milensk1, thank you for reporting this and helping make Ubuntu better. Given Maverick is EOL as of April 10, 2012, the bug report would be considered closed. If this is reproducible in a supported release, please file a new report. Thank you for your understanding. Helpful bug reporting tips: https://help.ubuntu.com/community/ReportingBugs ** Tags added: latest-bios-1010 ** Changed in: linux (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/603208 Title: kernel panic upon deleting old (2.6.35.6.9) generic image Status in “linux” package in Ubuntu: Invalid Bug description: Steps to reproduce 1) Install the latest 2.6.35.7.8 kernel 2) Reboot 3) From Synaptic remove the previous 2.6.35.6.9 generic image Expected result The process should go on flawlessly, without errors etc. Actual result Kernel Panic error message pop-ups *Additional Info: OS: Ubuntu Maverick 10.10 No actual misfunctionalities encountered (besides the error message) ProblemType: KernelOops DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-7-generic 2.6.35-7.11 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.35-7.11-generic 2.6.35-rc4 Uname: Linux 2.6.35-7-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Annotation: Your system might become unstable now and might need to be restarted. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: milensk1 1754 F pulseaudio /dev/snd/controlC1: milensk1 1754 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'nForce2'/'NVidia nForce2 with ALC650F at irq 21' Mixer name : 'Realtek ALC650F' Components : 'AC97a:414c4723' Controls : 50 Simple ctrls : 33 Card1.Amixer.info: Card hw:1 'U0x93a0x262c'/'USB Device 0x93a:0x262c at usb-:00:02.1-1, full speed' Mixer name : 'USB Mixer' Components : 'USB093a:262c' Controls : 2 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 2 Mono: Capture 0 [0%] [30.00dB] [on] Date: Thu Jul 8 17:59:58 2010 Failure: oops HibernationDevice: RESUME=UUID=427607e4-541f-4b44-a1ef-37032f3f9bf8 IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Bus 003 Device 002: ID 093a:262c Pixart Imaging, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK Computer INC. A7N8X2.0 ProcCmdLine: root=UUID=8f8bb3aa-5e24-4eaa-8dcc-6997b4e956cb ro quiet splash vga=0x0323 RelatedPackageVersions: linux-firmware 1.37 RfKill: SourcePackage: linux Title: BUG: unable to handle kernel NULL pointer dereference at 0008 WpaSupplicantLog: dmi.bios.date: 08/04/2004 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: ASUS A7N8X2.0 ACPI BIOS Rev 1010 dmi.board.name: A7N8X2.0 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: REV 2.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufactture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvrASUSA7N8X2.0ACPIBIOSRev1010:bd08/04/2004:svnASUSTeKComputerINC.:pnA7N8X2.0:pvrREV2.xx:rvnASUSTeKComputerINC.:rnA7N8X2.0:rvrREV2.xx:cvnChassisManufactture:ct3:cvrChassisVersion: dmi.product.name: A7N8X2.0 dmi.product.version: REV 2.xx dmi.sys.vendor: ASUSTeK Computer INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/603208/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 602995] Re: Poor battery life on UL30VT due to NVidia graphics active
Stuart Bishop, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: bios-outdated-211 ** Tags added: maverick ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/602995 Title: Poor battery life on UL30VT due to NVidia graphics active Status in “linux” package in Ubuntu: Incomplete Bug description: The ASUS UL30VT has two graphics cards like many modern laptops. Unfortunately, the higher powered NVidia g210m is active by default, chewing through an additional 4 watts of power and reducing battery life by a few hours. This will be a non-issue when Bug #312756 is fixed (graphics card hot switch). In the interim, laptop users need some way of disabling high powered graphics cards to conserve power. This is not possible in the ASUS UL30VT. A partial solution is available at http://ubuntuforums.org/showthread.php?t=1366605 which provides a package that disables the NVidia card. Unfortunately, the card is reactivated when resuming from suspend and not enabled by default on boot. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-23-generic 2.6.32-23.37 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5 Uname: Linux 2.6.32-23-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: stub 1669 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfcbf4000 irq 22' Mixer name : 'Realtek ALC269' Components : 'HDA:10ec0269,104313a3,0014' Controls : 13 Simple ctrls : 8 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xfe97c000 irq 16' Mixer name : 'Nvidia ID b' Components : 'HDA:10de000b,10de0101,00100100' Controls : 0 Simple ctrls : 0 Card1.Amixer.values: Date: Thu Jul 8 12:00:37 2010 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=f811cf52-6896-4412-9ce1-bfb7b100a321 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100429) MachineType: ASUSTeK Computer Inc. UL30VT ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=5c00a75e-2514-46d7-815d-59bb5f73ee1c ro quiet splash ProcEnviron: PATH=(custom, user) LANG=en_US.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34.1 SourcePackage: linux dmi.bios.date: 11/04/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 203 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UL30VT dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version:
[Kernel-packages] [Bug 600728] Re: gave up waiting for root device (temporary, intermittent)
Forest, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: latest-bios-0604 ** No longer affects: udev (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/600728 Title: gave up waiting for root device (temporary, intermittent) Status in “linux” package in Ubuntu: Incomplete Bug description: My Lucid installation sometimes fails to boot, dropping me instead into a BusyBox shell. The error message looks like this: Gave up wiating for root device. Common problems: - Boot args (cat /proc/cmdline) - check rootdelay= (did the system wait long enough?) - check root= (did the system wait for the right device?) - missing modules (cat /proc/modules; ls /dev) ALERT! /dev/disk/by-uuid/01234567-89ab-cdef-0123-456789abcdef does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ My root= line contains the correct uuid. (I masked it in the error message above.) Adding a rootdelay= of a couple minutes seems to make it fail less often. This is not a viable solution, because a couple minutes is way to long to have to wait, because it doesn't always help, and because booting used to work just fine with no wait. If I wait a few minutes and type 'exit' at the (initramfs) prompt, the system boots. Sometimes I have to try this a few times before it works. This bug is distinct from bug 360378, because in my case, the system is able to boot if I wait long enough. (Note the comments in bug 360378 stating that rootdelay doesn't help there.) The problem is clearly not because my disk is taking too long to become ready. My root, /boot, and boot sector are all on the same disk. If the disk wasn't ready, the system would not have been able to load GRUB or reach the BusyBox shell. This seems to be a regression. My system booted consistently in early Intrepid kernels and in releases earlier than Intrepid. The problem first showed up late in the Intrepid release cycle, presumably after a kernel upgrade. I was using GRUB 1 when the problem first appeared. It still exists after upgrading to GRUB 2. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Audigy2'/'SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xec00, irq 17' Mixer name : 'SigmaTel STAC9721,23' Components : 'AC97a:83847609' Controls : 210 Simple ctrls : 46 DistroRelease: Ubuntu 10.04 Frequency: Once every few days. HibernationDevice: RESUME=UUID=cf1efe17-335f-4939-aff9-d91f8a4c8ed0 IwConfig: lono wireless extensions. eth0 no wireless extensions. vboxnet0 no wireless extensions. MachineType: System manufacturer P5K/EPU NonfreeKernelModules: nvidia Package: linux (not installed) ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic
[Kernel-packages] [Bug 592892] Re: Hardware [Intel 82801GR/GH] RAID enabled without confirmation in desktop install
Markus Schmidt, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: bios-outdated-4131 lucid ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/592892 Title: Hardware [Intel 82801GR/GH] RAID enabled without confirmation in desktop install Status in “linux” package in Ubuntu: Incomplete Bug description: Hardware RAID controller, disabled in card BIOS (no volumes in array), two HD's connected, both at same size, working as normal IDE A and B with completely different partitions. Fdisk -l after booting from desktop CD shows both drives as expected (sda/sdb with all partitions), gparted looks fine, too. No RAID mapping, no fakeraid, normal IDE behaviour. Starting installation and choosing manual partitioning shows only first drive as mapped devices. After installation sdb became a real clone of sda and both are combined as a RAID array (I tested with forensics, the contents are the same on both disks). I expected the same behavior as netboot and alternate install offers: You have to activate RAID *manually*. Automatic activation of RAID array (how? controller is still unconfigured in its BIOS) may be highly insecure for unexperienced users because of the risk of data loss. What confuses me is that the methods for experienced users (alternate/PXE) contain a simple switch, while the way to work around under graphical interface is uninstalling dmraid in the running live system via aptitude and remove dm_raid45 module afterwards manually. Then both disks will show as expected in manual partitioning. If it's not a bug but a feature, it should be clearly documented in the installation process I think. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.20. Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp1', '/dev/dsp', '/dev/snd/pcmC1D0c', '/dev/snd/hwC1D0', '/dev/snd/midiC1D1', '/dev/snd/hwC1D2', '/dev/snd/pcmC1D2p', '/dev/snd/controlC1', '/dev/snd/midiC1D0', '/dev/snd/pcmC1D1c', '/dev/snd/pcmC1D3p', '/dev/snd/pcmC1D2c', '/dev/snd/midiC1D2', '/dev/snd/pcmC1D0p', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D0c', '/dev/snd/seq', '/dev/snd/timer', '/dev/sequencer', '/dev/sequencer2'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'R15'/'RME Digi9652 (Rev 1.5) at 0x9000, irq 22' Mixer name : '' Components : '' Controls : 16 Simple ctrls : 12 Card1.Amixer.info: Card hw:1 'Live'/'SB Live! Platinum [CT4760P] (rev.7, serial:0x80401102) at 0x1000, irq 21' Mixer name : 'TriTech TR28602' Components : 'AC97a:54524123' Controls : 216 Simple ctrls : 38 DistroRelease: Ubuntu 10.04 HibernationDevice: RESUME=UUID=b84d766a-5d79-435c-b416-835cca7423da InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) IwConfig: lono wireless extensions. eth0 no wireless extensions. Package: linux (not installed) ProcCmdLine:
[Kernel-packages] [Bug 582732] Re: Strigi indexing can't be initialised after last update on Lucid
startslights, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: bios-outdated-2101 ** Tags added: regression-update ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/582732 Title: Strigi indexing can't be initialised after last update on Lucid Status in “linux” package in Ubuntu: Incomplete Bug description: Hello, i running Kubuntu Lucid LVM 10.04 on x86 64 and yesterday after do the last update, was jockey updated, now Strigi desktop stop to work after a little while. I don't get any errors or crash, it just disappear from the taskbar and if i open the configuration windows, i see that Strigi write a message : The Strigi Service can't be initialized , it's generally due of a installation problem. Before this update it always running fine . Linux xxx 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-22-generic 2.6.32-22.33 Regression: No Reproducible: No ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: amd64 CRDA: Error: [Errno 2] Aucun fichier ou dossier de ce type Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf9ff8000 irq 22' Mixer name : 'Analog Devices AD1989B' Components : 'HDA:11d4989b,10438311,00100300' Controls : 48 Simple ctrls : 27 Date: Wed May 19 11:09:09 2010 EcryptfsInUse: Yes Frequency: I don't know. HibernationDevice: RESUME=UUID=097e4935-17ab-44cd-ac83-7c092ceb56c7 HotplugNewDevices: HotplugNewMounts: InstallationMedia: Kubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100427) MachineType: System manufacturer P5Q-E ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-22-generic root=/dev/mapper/hostname-root ro quiet splash ProcEnviron: LANGUAGE= LANG=fr_CH.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 RfKill: SourcePackage: linux Symptom: storage UdevMonitorLog: monitor will print the received events for: UDEV - the event which udev sends out after rule processing UdisksMonitorLog: Monitoring activity from the disks daemon. Press Ctrl+C to cancel. dmi.bios.date: 02/25/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2001 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P5Q-E dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2001:bd02/25/2009:svnSystemmanufacturer:pnP5Q-E:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5Q-E:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: P5Q-E dmi.product.version: System Version dmi.sys.vendor: System manufacturer --- Architecture: amd64 DistroRelease:
[Kernel-packages] [Bug 588059] Re: HP NC8000 Mute Button LED not lighting up
Mendez, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: bios-outdated-f.18 ** Changed in: linux (Ubuntu) Importance: Medium = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/588059 Title: HP NC8000 Mute Button LED not lighting up Status in “linux” package in Ubuntu: Incomplete Bug description: Binary package hint: pulseaudio Xubuntu 10.04 - which I *think* uses PulseAudio as default, please reassign if I'm incorrect in thinking this. The mute LED on my NC8000 laptop doesn't toggle correctly when the button is pressed. I've found an ALSA bug report about this https://bugtrack.alsa-project.org/alsa-bug/view.php?id=667 (choose View-Only if you get a login screen) and, while it's a while since I've used Linux on this laptop I think it has worked correctly in the past. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mendez 1196 F xfce4-mixer-plu mendez 1199 F pulseaudio mendez 1227 F xfce4-volumed Card0.Amixer.info: Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981B at irq 11' Mixer name : 'Analog Devices AD1981B' Components : 'AC97a:41445374' Controls : 31 Simple ctrls : 21 CurrentDmesg: [ 22.282131] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input7 [ 23.925447] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 31.076046] eth1: no IPv6 routers present [ 46.506115] lib80211_crypt: registered algorithm 'CCMP' [ 46.582491] padlock: VIA PadLock not detected. DistroRelease: Ubuntu 10.04 InstallationMedia: Xubuntu 10.04 Lucid Lynx - Release i386 (20100429) Package: pulseaudio 1:0.9.22~0.9.21+stable-queue-32-g8478-0ubuntu14 PackageArchitecture: i386 ProcEnviron: LANG=en_GB.utf8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Tags: lucid Uname: Linux 2.6.32-22-generic i686 UserGroups: adm admin audio cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 11/09/2005 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68BAR Ver. F.17 dmi.board.name: 088C dmi.board.vendor: Hewlett-Packard dmi.board.version: 8051 Version 1E.19 dmi.chassis.asset.tag: CNU4110HMT dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68BARVer.F.17:bd11/09/2005:svnHewlett-Packard:pnHPCompaqnc8000(DN889A#ABU):pvrF.17:rvnHewlett-Packard:rn088C:rvr8051Version1E.19:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq nc8000 (DN889A#ABU) dmi.product.version: F.17 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/588059/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 581936] Re: [Lucid]Sudden drop of connecton speed with Broadcom card
jhoechtl, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Package changed: archlinux = broadcom-sta (Ubuntu) ** Changed in: broadcom-sta (Ubuntu) Status: Opinion = New ** No longer affects: broadcom-sta (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/581936 Title: [Lucid]Sudden drop of connecton speed with Broadcom card Status in Broadcom 802.11 Linux STA driver: Confirmed Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: Incomplete Bug description: After some time (within minutes) the internet connection drops considerably. Manually disabling and enabling WiFi always helps. While I have this particular broadcom driver in use it might not be related to this driver at all as so many people face WiFi network connection speed. cf: http://ubuntuforums.org/showthread.php?t=1486129 Johann ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: bcmwl-kernel-source 5.60.48.36+bdcom-0ubuntu3 ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 NonfreeKernelModules: wl nvidia Architecture: amd64 Date: Mon May 17 22:22:12 2010 InstallationMedia: Kubuntu 10.04 LTS Lucid Lynx - Release amd64 (20100427) ProcEnviron: LANGUAGE= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: bcmwl To manage notifications about this bug go to: https://bugs.launchpad.net/broadcom-sta/+bug/581936/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
Re: [Kernel-packages] [Bug 1252945] Re: [HP Pavilion 15-e010ax Notebook PC] Unable to install Saucy
Have sent email to addresses as suggested. Will I receive info with a url as you requested or do I need to subscribe to these lists On 16 December 2013 19:34, Christopher M. Penalver christopher.m.penal...@gmail.com wrote: brianM, I would send it to both mailing lists (DRM DRIVERS and RADEON FRAMEBUFFER DISPLAY DRIVER), and CC both Alex Deucher alexander.deuc...@amd.com and Christian König christian.koe...@amd.com . -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1252945 Title: [HP Pavilion 15-e010ax Notebook PC] Unable to install Saucy To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1252945/+subscriptions -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1252945 Title: [HP Pavilion 15-e010ax Notebook PC] Unable to install Saucy Status in “linux” package in Ubuntu: Triaged Bug description: Tried to install U13.10 using the desktop installer on HP 15e010ax laptop. Goes thru splash screen to freeze with a black screen with no cursor. Unable to access terminal. Was using uefi boot with secure boot disabled. This is a regression as U13.04 works on this machine and has been used to gather the debug info attached due no terminal access in 13.10. This occurs when trying to boot to live session or straight to install. Appears installer cannot set up a satisfactory default video driver for this machine. Note VESA: KALINDI works on 13.04 and probably should in 13.10. WORKAROUND: I installed saucy in this machine by a partition copy from another working pc. Found that a recovery boot works and installs video driver vesa:kalindi. Also installing fglrx works. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-33-generic 3.8.0-33.48 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brian 1918 F pulseaudio /dev/snd/controlC0: brian 1918 F pulseaudio CRDA: country AU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (3, 23) (5250 - 5330 @ 40), (3, 23), DFS (5735 - 5835 @ 40), (3, 30) Date: Wed Nov 20 14:35:58 2013 HibernationDevice: RESUME=UUID=5aed68e6-feb5-4218-8672-ac3a1790bbbe InstallationDate: Installed on 2013-11-18 (1 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC MarkForUpload: True ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-33-generic root=UUID=560ad8b8-e23f-4108-a24c-7e2bed8a81a6 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.8.0-33-generic N/A linux-backports-modules-3.8.0-33-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/27/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 213A dmi.board.vendor: Hewlett-Packard dmi.board.version: 02.12 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.22:bd09/27/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr088410305A1620100:rvnHewlett-Packard:rn213A:rvr02.12:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion 15 Notebook PC dmi.product.version: 088410305A1620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1252945/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 580750] Re: error mounting /proc/bus/usb on boot
efa, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: needs-full-computer-model ** Description changed: - After installation of 10.04 LTS kernel 2.6.32-22-generic, on boot I got - a screen with error: - + After installation of 10.04 LTS kernel 2.6.32-22-generic, on boot I got a screen with error: An error occurred while mounting /proc/bus/usb Press S to skip mounting or M for manual recovery - Manual recovery bring me to the console but it unusefull. - Pressing S will continue the boot normally. All USB devices seems working. - The problem is that the boot process need assistance pressing S every time and do not automatically continue. + Manual recovery bring me to the console but it unuseful. Pressing S will + continue the boot normally. All USB devices seems working. The problem + is that the boot process need assistance pressing S every time and do + not automatically continue. + + WORKAROUND: commenting the line in /etc/fstab. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-22-generic 2.6.32-22.33 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: efa4243 F pulseaudio /dev/snd/controlC0: efa4243 F pulseaudio CRDA: Error: [Errno 2] Nessun file o directory Card0.Amixer.info: Card hw:0 'SI7012'/'SiS SI7012 with ALC655 at irq 18' Mixer name : 'Realtek ALC655 rev 0' Components : 'AC97a:414c4760' Controls : 41 Simple ctrls : 26 Card1.Amixer.info: Card hw:1 'XS'/'TerraTec Electronic GmbH Cinergy Hybrid T USB XS at usb-:00:03.3-3, high sp' Mixer name : 'USB Mixer' Components : 'USB0ccd:0042' Controls : 2 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'Line',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 16 Mono: Capture 16 [100%] [16.00dB] [on] Card2.Amixer.info: Card hw:2 'Modem'/'SiS SI7013 Modem at irq 18' Mixer name : 'Silicon Laboratory Si3036,8 rev 2' Components : 'AC97m:53494c22' Controls : 3 Simple ctrls : 3 Card2.Codecs.codec97.0.mc97.1.1: 1-1/0: Silicon Laboratory Si3036,8 rev 2 Extended modem ID: codec=1 LIN1 Modem status : GPIO MREF ADC1 DAC1 PRE(ADC2) PRF(DAC2) PRG(HADC) PRH(HDAC) Line1 rate : 8000Hz CheckboxSubmission: 1025977719eeebebe5648c8ca87056aa CheckboxSystem: 533a8038ef5a55601694b49142442fa7 Date: Sat May 15 00:41:28 2010 HibernationDevice: RESUME=UUID=b058cb33-13a4-46f1-a255-c83b84371643 Lsusb: Bus 003 Device 002: ID 1241:1166 Belkin MI-2150 Trust Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0ccd:0042 TerraTec Electronic GmbH Cinergy Hybrid T XS Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: FUJITSU SIEMENS Amilo A Series PccardctlIdent: Socket 0: no product info available Socket 1: no product info
[Kernel-packages] [Bug 581194] Re: hibernate function should be possible with less swap space also
ajmal_82, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/581194 Title: hibernate function should be possible with less swap space also Status in “linux” package in Ubuntu: Incomplete Bug description: i have 400mb swap space and 7 gb of ubuntu root partition but ubuntu rejects to hibernate.so i want to hibernate,in xp operating system hibernate function is possible with this amount of harddisk space. thanks To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/581194/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 579534] Re: Rotate button doesn't work on HP TM2 laptop
Jeff, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/579534 Title: Rotate button doesn't work on HP TM2 laptop Status in The Linux Kernel: Confirmed Status in “linux” package in Ubuntu: Incomplete Bug description: Rotate button on side of HP TM2 screen doesn't work. Discussions I have seen cite that acpi_listen doesn't report anything when the button is pressed However I noticed in syslog that HP WMI reports a keypress for 2169 To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/579534/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1252945] Re: [HP Pavilion 15-e010ax Notebook PC] Unable to install Saucy
** Description changed: Tried to install U13.10 using the desktop installer on HP 15e010ax laptop. Goes thru splash screen to freeze with a black screen with no cursor. Unable to access terminal. Was using uefi boot with secure boot disabled. This is a regression as U13.04 works on this machine and has been used to gather the debug info attached due no terminal access in 13.10. This occurs when trying to boot to live session or straight to install. Appears installer cannot set up a satisfactory default video driver for this machine. Note VESA: KALINDI works on 13.04 and probably should in 13.10. WORKAROUND: I installed saucy in this machine by a partition copy from another working pc. Found that a recovery boot works and installs video driver vesa:kalindi. Also installing fglrx works. + + Mailing list URL: + linux-fbdev http://marc.info/?l=linux-fbdevm=138719951309785w=2 ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-33-generic 3.8.0-33.48 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brian 1918 F pulseaudio /dev/snd/controlC0: brian 1918 F pulseaudio CRDA: country AU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (3, 23) (5250 - 5330 @ 40), (3, 23), DFS (5735 - 5835 @ 40), (3, 30) Date: Wed Nov 20 14:35:58 2013 HibernationDevice: RESUME=UUID=5aed68e6-feb5-4218-8672-ac3a1790bbbe InstallationDate: Installed on 2013-11-18 (1 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC MarkForUpload: True ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-33-generic root=UUID=560ad8b8-e23f-4108-a24c-7e2bed8a81a6 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.8.0-33-generic N/A linux-backports-modules-3.8.0-33-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/27/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 213A dmi.board.vendor: Hewlett-Packard dmi.board.version: 02.12 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.22:bd09/27/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr088410305A1620100:rvnHewlett-Packard:rn213A:rvr02.12:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion 15 Notebook PC dmi.product.version: 088410305A1620100 dmi.sys.vendor: Hewlett-Packard -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1252945 Title: [HP Pavilion 15-e010ax Notebook PC] Unable to install Saucy Status in “linux” package in Ubuntu: Triaged Bug description: Tried to install U13.10 using the desktop installer on HP 15e010ax laptop. Goes thru splash screen to freeze with a black screen with no cursor. Unable to access terminal. Was using uefi boot with secure boot disabled. This is a regression as U13.04 works on this machine and has been used to gather the debug info attached due no terminal access in 13.10. This occurs when trying to boot to live session or straight to install. Appears installer cannot set up a satisfactory default video driver for this machine. Note VESA: KALINDI works on 13.04 and probably should in 13.10. WORKAROUND: I installed saucy in this machine by a partition copy from another working pc. Found that a recovery boot works and installs video driver vesa:kalindi. Also installing fglrx works. Mailing list URL: linux-fbdev http://marc.info/?l=linux-fbdevm=138719951309785w=2 ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-33-generic 3.8.0-33.48 ProcVersionSignature: Ubuntu 3.8.0-33.48-generic 3.8.13.11 Uname: Linux 3.8.0-33-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brian 1918 F pulseaudio /dev/snd/controlC0: brian 1918 F pulseaudio CRDA: country AU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (3, 23) (5250 - 5330 @ 40), (3, 23), DFS (5735 - 5835 @ 40), (3, 30) Date: Wed Nov 20 14:35:58 2013 HibernationDevice: RESUME=UUID=5aed68e6-feb5-4218-8672-ac3a1790bbbe InstallationDate: Installed on 2013-11-18 (1 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64
[Kernel-packages] [Bug 1257538] Re: linux-ti-omap4: 3.2.0-1442.61 -proposed tracker
** Tags added: qa-testing-passed ** Changed in: kernel-sru-workflow/regression-testing Status: In Progress = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-ti-omap4 in Ubuntu. https://bugs.launchpad.net/bugs/1257538 Title: linux-ti-omap4: 3.2.0-1442.61 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow upload-to-ppa series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in “linux-ti-omap4” package in Ubuntu: New Status in “linux-ti-omap4” source package in Precise: New Bug description: This bug is for tracking the version to be filled upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 04. December 2013 00:24 UTC kernel-stable-master-bug:1257370 kernel-stable-Certification-testing-end:Wednesday, 04. December 2013 17:05 UTC kernel-stable-Prepare-package-end:Wednesday, 04. December 2013 22:05 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 04. December 2013 22:05 UTC kernel-stable-Promote-to-proposed-end:Thursday, 05. December 2013 20:04 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Thursday, 05. December 2013 21:06 UTC kernel-stable-Security-signoff-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Verification-testing-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Regression-testing-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Security-signoff-end:Friday, 13. December 2013 17:03 UTC kernel-stable-Regression-testing-end:Monday, 16. December 2013 14:04 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1257538/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 578506] Re: [Kernel] ACPI: EC: input buffer is not empty, aborting transaction
** Description changed: - Hi, - on upgrade to 10.04 version. - - After few minuts of use apci stop to wrok (don't recognize ac/dc or - battery, don't change lcd blacklight, etcc..) and start to flood dmes - with this messages: - + On my notebook acer aspire 5930G on upgrade to 10.04 version, after few minutes of use apci stops working (don't recognize ac/dc or battery, don't change lcd blacklight, etc.) and start to flood dmes with this messages: [ 767.208058] ACPI: EC: input buffer is not empty, aborting transaction [ 767.208072] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 767.208106] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.GBST] (Node f7017030), AE_TIME [ 767.208197] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7017120), AE_TIME [ 767.208277] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) + Trying to reboot (or to shutdown and restart) my pc don't want to boot! - Trying to reboot (or to shutdown and restart) my pc don't want to boot! Unique solution: get out the battery and replace. - - PC: notebook acer aspire 5930G - - lspci - 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) - 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) - 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) - 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) - 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) - 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) - 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) - 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) - 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) - 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) - 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) - 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) - 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) - 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) - 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) - 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) - 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) - 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) - 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) - 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) - 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) - 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16) - 03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100 - - - uname -a - Linux luca-laptop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686 GNU/Linux + WORKAROUND: Get out the battery and replace. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-headers-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.31-19.56-generic Uname: Linux 2.6.31-19-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.20. Architecture: i386 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: luca 5325 F pulseaudio - /dev/snd/pcmC0D0p: luca 5325 F...m pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: luca 5325 F pulseaudio + /dev/snd/pcmC0D0p: luca 5325 F...m pulseaudio CRDA: Error: [Errno 2] Nessun file o directory Card0.Amixer.info: - Card hw:0 'Intel'/'HDA Intel at 0xf650 irq 21' -Mixer name : 'Nvidia MCP78 HDMI' -Components : 'HDA:10ec0888,1025013f,00100202 HDA:11c11040,11c10001,00100200 HDA:10de0003,10de0101,0010' -Controls : 39 -Simple ctrls : 21 + Card hw:0 'Intel'/'HDA Intel at 0xf650 irq 21' + Mixer name : 'Nvidia MCP78 HDMI' + Components : 'HDA:10ec0888,1025013f,00100202 HDA:11c11040,11c10001,00100200 HDA:10de0003,10de0101,0010' + Controls : 39 + Simple ctrls : 21 Date: Mon May 10 23:25:40 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=96cdf22d-d1a9-4285-818c-c7751f7b8bd4 MachineType: Acer Aspire 5930 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic
[Kernel-packages] [Bug 1257538] Re: linux-ti-omap4: 3.2.0-1442.61 -proposed tracker
** Description changed: This bug is for tracking the version to be filled upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 04. December 2013 00:24 UTC kernel-stable-master-bug:1257370 kernel-stable-Certification-testing-end:Wednesday, 04. December 2013 17:05 UTC kernel-stable-Prepare-package-end:Wednesday, 04. December 2013 22:05 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 04. December 2013 22:05 UTC kernel-stable-Promote-to-proposed-end:Thursday, 05. December 2013 20:04 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Thursday, 05. December 2013 21:06 UTC kernel-stable-Security-signoff-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Verification-testing-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Regression-testing-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Security-signoff-end:Friday, 13. December 2013 17:03 UTC + kernel-stable-Regression-testing-end:Monday, 16. December 2013 14:04 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-ti-omap4 in Ubuntu. https://bugs.launchpad.net/bugs/1257538 Title: linux-ti-omap4: 3.2.0-1442.61 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow upload-to-ppa series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in “linux-ti-omap4” package in Ubuntu: New Status in “linux-ti-omap4” source package in Precise: New Bug description: This bug is for tracking the version to be filled upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 04. December 2013 00:24 UTC kernel-stable-master-bug:1257370 kernel-stable-Certification-testing-end:Wednesday, 04. December 2013 17:05 UTC kernel-stable-Prepare-package-end:Wednesday, 04. December 2013 22:05 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 04. December 2013 22:05 UTC kernel-stable-Promote-to-proposed-end:Thursday, 05. December 2013 20:04 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Thursday, 05. December 2013 21:06 UTC kernel-stable-Security-signoff-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Verification-testing-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Regression-testing-start:Thursday, 05. December 2013 21:06 UTC kernel-stable-Security-signoff-end:Friday, 13. December 2013 17:03 UTC kernel-stable-Regression-testing-end:Monday, 16. December 2013 14:04 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1257538/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1244630] Re: Ubuntu 13.10 fan always on
This might be fixed in the upstream 3.12.5 kernel by this commit (the model name in the patch description is mispelt, but I've checked the patch's source code and it is spelt correctly there, which is what matters): commit 97b054c2ee8ba8a3542f391641fd78f6e3e44f0a Author: Alan Cox Date: Tue Dec 3 13:56:56 2013 -0800 drivers/char/i8k.c: add Dell XPLS L421X commit 9aa5b0181bdf335f0b731d8502e128a862884bcd upstream. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=60772 Signed-off-by: Alan Cox Reported-by: Leho Kraav Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman ** Bug watch added: Linux Kernel Bug Tracker #60772 http://bugzilla.kernel.org/show_bug.cgi?id=60772 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1244630 Title: Ubuntu 13.10 fan always on Status in “linux” package in Ubuntu: Incomplete Bug description: System : XPS L421X Bios Version : A12 After the upgrade to Ubuntu 13.10, but maybe also before, in my system the fan are always on. Why ? Thks Vincenzo Graziadei In dmesg I've found this warning : [ 18.080298] ACPI Warning: 0x0428-0x042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 18.080316] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080320] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.080324] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080327] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.113551] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.113590] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159532] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159565] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 19.299558] ACPI Warning: Evaluating _BQC failed (20130517/video-566) --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: enzo 2423 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=215fb241-2ecd-41c9-a622-7e12673fb00b InstallationDate: Installed on 2012-12-14 (315 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Dell Inc. XPS L421X MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=ca585b8f-dd71-4f9f-b83f-6f3f454318ce ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-12-generic x86_64 UpgradeStatus: Upgraded to saucy on 2013-10-18 (7 days ago) UserGroups: adm cdrom debian-tor dialout dip lpadmin netdev plugdev sambashare sudo dmi.bios.date: 09/28/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A12 dmi.board.name: 08HDPJ dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A12 dmi.modalias: dmi:bvnDellInc.:bvrA12:bd09/28/2012:svnDellInc.:pnXPSL421X:pvrA12:rvnDellInc.:rn08HDPJ:rvrA00:cvnDellInc.:ct8:cvrA12: dmi.product.name: XPS L421X dmi.product.version: A12 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1244630/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 578506] Re: [Kernel] ACPI: EC: input buffer is not empty, aborting transaction
I have had this problems for years. On my Acer 5930G this problem has disappeared one month ago, once I updated to Linux Mint 16 and to kernel 3.11. Should this bug be marked as ''solved''? Best regards, Gabriele Bianchi -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/578506 Title: [Acer Aspire 5930] ACPI: EC: input buffer is not empty, aborting transaction Status in “linux” package in Ubuntu: Incomplete Bug description: On my notebook acer aspire 5930G on upgrade to 10.04 version, after few minutes of use apci stops working (don't recognize ac/dc or battery, don't change lcd blacklight, etc.) and start to flood dmes with this messages: [ 767.208058] ACPI: EC: input buffer is not empty, aborting transaction [ 767.208072] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 767.208106] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.GBST] (Node f7017030), AE_TIME [ 767.208197] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7017120), AE_TIME [ 767.208277] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) Trying to reboot (or to shutdown and restart) my pc don't want to boot! WORKAROUND: Get out the battery and replace. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-headers-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.31-19.56-generic Uname: Linux 2.6.31-19-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.20. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luca 5325 F pulseaudio /dev/snd/pcmC0D0p: luca 5325 F...m pulseaudio CRDA: Error: [Errno 2] Nessun file o directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf650 irq 21' Mixer name : 'Nvidia MCP78 HDMI' Components : 'HDA:10ec0888,1025013f,00100202 HDA:11c11040,11c10001,00100200 HDA:10de0003,10de0101,0010' Controls : 39 Simple ctrls : 21 Date: Mon May 10 23:25:40 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=96cdf22d-d1a9-4285-818c-c7751f7b8bd4 MachineType: Acer Aspire 5930 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=UUID=eb29c17b-d483-46a9-853c-0236d0829819 ro quiet splash ProcEnviron: LANGUAGE=it_IT:it:en_GB:en LANG=it_IT.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 SourcePackage: linux WpaSupplicantLog: dmi.bios.date: 08/01/2008 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.19 dmi.board.name: Eiger dmi.board.vendor: Acer dmi.board.version: Rev dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.19:bd08/01/2008:svnAcer:pnAspire5930:pvr0100:rvnAcer:rnEiger:rvrRev:cvnAcer:ct10:cvrN/A: dmi.product.name: Aspire 5930 dmi.product.version: 0100 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/578506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 578506] Re: [Acer Aspire 5930] ACPI: EC: input buffer is not empty, aborting transaction
Gabriele Bianchi, at least for me the bug is still persistant on Debian. $ uname -a Linux debian 3.11-2-amd64 #1 SMP Debian 3.11.10-1 (2013-1 2-04) x86_64 GNU/Linux -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/578506 Title: [Acer Aspire 5930] ACPI: EC: input buffer is not empty, aborting transaction Status in “linux” package in Ubuntu: Incomplete Bug description: On my notebook acer aspire 5930G on upgrade to 10.04 version, after few minutes of use apci stops working (don't recognize ac/dc or battery, don't change lcd blacklight, etc.) and start to flood dmes with this messages: [ 767.208058] ACPI: EC: input buffer is not empty, aborting transaction [ 767.208072] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 767.208106] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.GBST] (Node f7017030), AE_TIME [ 767.208197] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7017120), AE_TIME [ 767.208277] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) Trying to reboot (or to shutdown and restart) my pc don't want to boot! WORKAROUND: Get out the battery and replace. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-headers-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.31-19.56-generic Uname: Linux 2.6.31-19-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.20. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luca 5325 F pulseaudio /dev/snd/pcmC0D0p: luca 5325 F...m pulseaudio CRDA: Error: [Errno 2] Nessun file o directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf650 irq 21' Mixer name : 'Nvidia MCP78 HDMI' Components : 'HDA:10ec0888,1025013f,00100202 HDA:11c11040,11c10001,00100200 HDA:10de0003,10de0101,0010' Controls : 39 Simple ctrls : 21 Date: Mon May 10 23:25:40 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=96cdf22d-d1a9-4285-818c-c7751f7b8bd4 MachineType: Acer Aspire 5930 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=UUID=eb29c17b-d483-46a9-853c-0236d0829819 ro quiet splash ProcEnviron: LANGUAGE=it_IT:it:en_GB:en LANG=it_IT.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 SourcePackage: linux WpaSupplicantLog: dmi.bios.date: 08/01/2008 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.19 dmi.board.name: Eiger dmi.board.vendor: Acer dmi.board.version: Rev dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.19:bd08/01/2008:svnAcer:pnAspire5930:pvr0100:rvnAcer:rnEiger:rvrRev:cvnAcer:ct10:cvrN/A: dmi.product.name: Aspire 5930 dmi.product.version: 0100 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/578506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1244630] Re: [Dell XPS L421X] Ubuntu 13.10 fan always on
** Summary changed: - Ubuntu 13.10 fan always on + [Dell XPS L421X] Ubuntu 13.10 fan always on -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1244630 Title: [Dell XPS L421X] Ubuntu 13.10 fan always on Status in “linux” package in Ubuntu: Incomplete Bug description: After the upgrade to Ubuntu 13.10, but maybe also before, in my system the fan are always on. In dmesg I've found this warning : [ 18.080298] ACPI Warning: 0x0428-0x042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 18.080316] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080320] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.080324] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080327] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.113551] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.113590] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159532] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159565] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 19.299558] ACPI Warning: Evaluating _BQC failed (20130517/video-566) Potential fix: https://git.kernel.org/cgit/linux/kernel/git/stable /linux-stable.git/commit/?id=9aa5b0181bdf335f0b731d8502e128a862884bcd --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: enzo 2423 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=215fb241-2ecd-41c9-a622-7e12673fb00b InstallationDate: Installed on 2012-12-14 (315 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Dell Inc. XPS L421X MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=ca585b8f-dd71-4f9f-b83f-6f3f454318ce ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-12-generic x86_64 UpgradeStatus: Upgraded to saucy on 2013-10-18 (7 days ago) UserGroups: adm cdrom debian-tor dialout dip lpadmin netdev plugdev sambashare sudo dmi.bios.date: 09/28/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A12 dmi.board.name: 08HDPJ dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A12 dmi.modalias: dmi:bvnDellInc.:bvrA12:bd09/28/2012:svnDellInc.:pnXPSL421X:pvrA12:rvnDellInc.:rn08HDPJ:rvrA00:cvnDellInc.:ct8:cvrA12: dmi.product.name: XPS L421X dmi.product.version: A12 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1244630/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1245938] Re: Intel x520 NIC's (ixgbe) stop working in 12.10, 13.04, 13.10
Hi, @ Joseph: ill test your Kernel later today or tomorrow FYI Workaround: If you need to boot a new Kernel you can try to add pci=realloc=off to your grub config. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1245938 Title: Intel x520 NIC's (ixgbe) stop working in 12.10, 13.04, 13.10 Status in “linux” package in Ubuntu: Confirmed Status in “linux” source package in Quantal: Confirmed Status in “linux” source package in Raring: Confirmed Status in “linux” source package in Saucy: Confirmed Status in “linux” source package in Trusty: Confirmed Bug description: We have a server (Dell R715) with two Intel x520 NIC's. If we run Ubuntu 12.04 on it, the NIC's works flawlessly (with stock kernel driver or with Intel compiled one), but if we upgrade release to 12.10, 13.04 or 13.10, the NIC's stop working: either stock or Intel drivers fails with error: [ 226.395766] Intel(R) 10 Gigabit PCI Express Network Driver - version 3.18.7 [ 226.395770] Copyright (c) 1999-2013 Intel Corporation. [ 226.395980] ixgbe: probe of :22:00.0 failed with error -5 [ 226.396092] ixgbe: probe of :22:00.1 failed with error -5 [ 226.396203] ixgbe: probe of :23:00.0 failed with error -5 [ 226.396311] ixgbe: probe of :23:00.1 failed with error -5 I contacted Intel developers and they responded: Hey Fernando, We (ixgbe) only returns EIO (error 5) for a couple of reasons. 1) When we fail to io map (ioremap) 2) If the eeprom checksum is incorrect. 3) If the MAC address from the checksum is invalid Reasons 2 and 3 are related to the NIC's eeprom so if they worked with another system they should still be fine now. If you really wanted to verify you could try out the NIC's on a known good system again to see if the eeprom somehow got corrupted. That pretty much leaves us with ioremap returning an error. I'm not at all sure why your Ubuntu release would not like the way we are calling ioremap, but it might give you a place to start looking in Ubuntu changes. Thanks, -Don If the server boot with kernel 3.2.0-55 (from grub menu) both NIC's works fine. Please let me know how can I help! Regards Fernando To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1245938/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1244630] Re: [Dell XPS L421X] Ubuntu 13.10 fan always on
** Description changed: - System : XPS L421X - Bios Version : A12 - After the upgrade to Ubuntu 13.10, but maybe also before, in my system the fan are always on. - Why ? - Thks - - Vincenzo Graziadei - - In dmesg I've found this warning : + After the upgrade to Ubuntu 13.10, but maybe also before, in my system the fan are always on. In dmesg I've found this warning : [ 18.080298] ACPI Warning: 0x0428-0x042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 18.080316] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080320] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.080324] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080327] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.113551] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.113590] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159532] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159565] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 19.299558] ACPI Warning: Evaluating _BQC failed (20130517/video-566) - --- + Potential fix: https://git.kernel.org/cgit/linux/kernel/git/stable + /linux-stable.git/commit/?id=9aa5b0181bdf335f0b731d8502e128a862884bcd + + --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: enzo 2423 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: enzo 2423 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=215fb241-2ecd-41c9-a622-7e12673fb00b InstallationDate: Installed on 2012-12-14 (315 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Dell Inc. XPS L421X MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=ca585b8f-dd71-4f9f-b83f-6f3f454318ce ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RelatedPackageVersions: - linux-restricted-modules-3.11.0-12-generic N/A - linux-backports-modules-3.11.0-12-generic N/A - linux-firmware 1.116 + linux-restricted-modules-3.11.0-12-generic N/A + linux-backports-modules-3.11.0-12-generic N/A + linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-12-generic x86_64 UpgradeStatus: Upgraded to saucy on 2013-10-18 (7 days ago) UserGroups: adm cdrom debian-tor dialout dip lpadmin netdev plugdev sambashare sudo dmi.bios.date: 09/28/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A12 dmi.board.name: 08HDPJ dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A12 dmi.modalias: dmi:bvnDellInc.:bvrA12:bd09/28/2012:svnDellInc.:pnXPSL421X:pvrA12:rvnDellInc.:rn08HDPJ:rvrA00:cvnDellInc.:ct8:cvrA12: dmi.product.name: XPS L421X dmi.product.version: A12 dmi.sys.vendor: Dell Inc. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1244630 Title: [Dell XPS L421X] Ubuntu 13.10 fan always on Status in “linux” package in Ubuntu: Incomplete Bug description: After the upgrade to Ubuntu 13.10, but maybe also before, in my system the fan are always on. In dmesg I've found this warning : [ 18.080298] ACPI Warning: 0x0428-0x042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 18.080316] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080320] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.080324] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080327] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.113551] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package]
[Kernel-packages] [Bug 1244630] Re: [Dell XPS L421X] Ubuntu 13.10 fan always on
** Tags removed: bios-outdated-a14 ** Tags added: bios-outdated-a15 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1244630 Title: [Dell XPS L421X] Ubuntu 13.10 fan always on Status in “linux” package in Ubuntu: Incomplete Bug description: After the upgrade to Ubuntu 13.10, but maybe also before, in my system the fan are always on. In dmesg I've found this warning : [ 18.080298] ACPI Warning: 0x0428-0x042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251) [ 18.080316] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080320] ACPI Warning: 0x0530-0x053f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.080324] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130517/utaddress-251) [ 18.080327] ACPI Warning: 0x0500-0x052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251) [ 18.113551] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.113590] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159532] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 18.159565] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95) [ 19.299558] ACPI Warning: Evaluating _BQC failed (20130517/video-566) Potential fix: https://git.kernel.org/cgit/linux/kernel/git/stable /linux-stable.git/commit/?id=9aa5b0181bdf335f0b731d8502e128a862884bcd --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: enzo 2423 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=215fb241-2ecd-41c9-a622-7e12673fb00b InstallationDate: Installed on 2012-12-14 (315 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Dell Inc. XPS L421X MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=ca585b8f-dd71-4f9f-b83f-6f3f454318ce ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-12-generic x86_64 UpgradeStatus: Upgraded to saucy on 2013-10-18 (7 days ago) UserGroups: adm cdrom debian-tor dialout dip lpadmin netdev plugdev sambashare sudo dmi.bios.date: 09/28/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A12 dmi.board.name: 08HDPJ dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A12 dmi.modalias: dmi:bvnDellInc.:bvrA12:bd09/28/2012:svnDellInc.:pnXPSL421X:pvrA12:rvnDellInc.:rn08HDPJ:rvrA00:cvnDellInc.:ct8:cvrA12: dmi.product.name: XPS L421X dmi.product.version: A12 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1244630/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 572868] Re: Lucid Live CD/USB freezes shortly after start
Ruben Verhack, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/572868 Title: Lucid Live CD/USB freezes shortly after start Status in “linux” package in Ubuntu: Incomplete Bug description: Hi, I downloaded the ubuntu lucid amd64 final iso and did the sha256sum. I created a live USB and also burned the iso on a disc. Both produced the same error: When I let it boot from the USB/CD it shows the purple splash with the keyboard equals human-icon, after that goes onto a black screen with a blinking cursor. When using the CD you can hear the CD spin down and no activity on the laptop. When I press the keyboard while booting, I can choose different options, options try ubuntu, install ubuntu and check for errors all fail in the same way. As I'm not able to do much, I can't use apport or read logs (unless there is a way to do so?) I'll put as much information about this laptop as I'm able to find: Intel® Core™ Duo T6600 (2.20 Ghz - 2 MB L2 cache) 15.6 LED widescreen WXGA (1366 x 768 pixels) Mobile GM45 chipset 4 GB DDR2 RAM VGA: Mobile Intel® GMA 4500MHD And it has currently Windows 7 installed Thanks for reading this bug report, and hopefully this can be fixed? EDIT: little detail though: when it hangs, I can reboot by pressing ctrl - alt - printScr - B To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/572868/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 578506] Re: [Acer Aspire 5930] ACPI: EC: input buffer is not empty, aborting transaction
Johannes Rudloff, so your hardware may be tracked, could you please file a new report by executing the following in a terminal while booted into Ubuntu with a supported repository kernel (not a mainline one) via: ubuntu-bug linux For more on this, please read the official Ubuntu documentation: Ubuntu Bug Control and Ubuntu Bug Squad: https://wiki.ubuntu.com/Bugs/BestPractices#X.2BAC8-Reporting.Focus_on_One_Issue Ubuntu Kernel Team: https://wiki.ubuntu.com/KernelTeam/KernelTeamBugPolicies#Filing_Kernel_Bug_reports Ubuntu Community: https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette When opening up the new report, please feel free to subscribe me to it. Thank you for your understanding. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/578506 Title: [Acer Aspire 5930] ACPI: EC: input buffer is not empty, aborting transaction Status in “linux” package in Ubuntu: Incomplete Bug description: On my notebook acer aspire 5930G on upgrade to 10.04 version, after few minutes of use apci stops working (don't recognize ac/dc or battery, don't change lcd blacklight, etc.) and start to flood dmes with this messages: [ 767.208058] ACPI: EC: input buffer is not empty, aborting transaction [ 767.208072] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 767.208106] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.GBST] (Node f7017030), AE_TIME [ 767.208197] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7017120), AE_TIME [ 767.208277] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) Trying to reboot (or to shutdown and restart) my pc don't want to boot! WORKAROUND: Get out the battery and replace. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-headers-2.6.32-21-generic 2.6.32-21.32 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.31-19.56-generic Uname: Linux 2.6.31-19-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.20. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: luca 5325 F pulseaudio /dev/snd/pcmC0D0p: luca 5325 F...m pulseaudio CRDA: Error: [Errno 2] Nessun file o directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf650 irq 21' Mixer name : 'Nvidia MCP78 HDMI' Components : 'HDA:10ec0888,1025013f,00100202 HDA:11c11040,11c10001,00100200 HDA:10de0003,10de0101,0010' Controls : 39 Simple ctrls : 21 Date: Mon May 10 23:25:40 2010 Frequency: Once a day. HibernationDevice: RESUME=UUID=96cdf22d-d1a9-4285-818c-c7751f7b8bd4 MachineType: Acer Aspire 5930 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=UUID=eb29c17b-d483-46a9-853c-0236d0829819 ro quiet splash ProcEnviron: LANGUAGE=it_IT:it:en_GB:en LANG=it_IT.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 SourcePackage: linux WpaSupplicantLog: dmi.bios.date: 08/01/2008 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.19 dmi.board.name: Eiger dmi.board.vendor: Acer dmi.board.version: Rev dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.19:bd08/01/2008:svnAcer:pnAspire5930:pvr0100:rvnAcer:rnEiger:rvrRev:cvnAcer:ct10:cvrN/A: dmi.product.name: Aspire 5930 dmi.product.version: 0100 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/578506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 573501] Re: FATAL: Module usbcore not found
Demmon, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/573501 Title: FATAL: Module usbcore not found Status in “linux” package in Ubuntu: Incomplete Bug description: Ubuntu 10.04 + usb modem DSL-200. sudo eciadsl-start [EciAdsl 1/5] Setting up USB support... FATAL: Module usbcore not found. Preliminary USB device filesystem is missing... trying to mount Preliminary USB device filesystem: failed to load /usr/bin/eciadsl-start: строка 263: fatal: команда не найдена cat: /proc/bus/devices: Нет такого файла или каталога Loading UHCI support... Warning: uhci-hcd module doesn't exist Warning: tun/tap module does not exist [EciAdsl 2/5] Uploading firmware... grep: /proc/bus/devices: Нет такого файла или каталога grep: /proc/bus/devices: Нет такого файла или каталога ERROR: modem not found To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/573501/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1257539] Re: linux-armadaxp: 3.2.0-1629.41 -proposed tracker
** Tags added: qa-testing-passed ** Changed in: kernel-sru-workflow/regression-testing Status: In Progress = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1257539 Title: linux-armadaxp: 3.2.0-1629.41 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Fix Released Status in Kernel SRU Workflow verification-testing series: Fix Released Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-armadaxp” source package in Precise: In Progress Bug description: This bug is for tracking the 3.2.0-1629.41 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 04. December 2013 00:26 UTC kernel-stable-master-bug:1257370 kernel-stable-Certification-testing-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Security-signoff-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Prepare-package-end:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-start:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-end:Thursday, 05. December 2013 19:05 UTC kernel-stable-Verification-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-Regression-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 06. December 2013 01:04 UTC kernel-stable-Verification-testing-end:Friday, 06. December 2013 01:04 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1257539/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 567365] Re: Eject key on Mac Pro not working
Dawning, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/567365 Title: Eject key on Mac Pro not working Status in Mactel Support: Confirmed Status in “linux” package in Ubuntu: Incomplete Bug description: I've found that on my Mac Pro (Edit: Mac Pro 3,1) running Ubuntu 10.04 x64 Beta 2 (completely updated as of April 20th 2010), the eject key on the keyboard doesn't eject the CD tray. However, on my Macbook, with the exact same software setup, the key does work. Update: As of Sept 14 2010, pressing the key will eject a CD, but will not retract the ejected tray. In both cases the eject image appears in the upper-right corner of the screen momentarily. Just that a CD will eject on the laptop (MacBook) machine and doesn't with the desktop. Edit: This had functioned correctly in 9.10 To manage notifications about this bug go to: https://bugs.launchpad.net/mactel-support/+bug/567365/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 569562] Re: HP G62 media player hotkey is dead
Andrei Kouznetsov, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: needs-full-computer-model ** Tags added: oneiric ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/569562 Title: HP G62 media player hotkey is dead Status in “linux” package in Ubuntu: Incomplete Bug description: Hi, I am using HP G62 with Ubuntu 10.04. My hotkeys mail, internet, calculator work perfectly. However, media player does not work. It does not generate any sequence. I tried 1. showkey 2. Preferences keyboard shortcuts 3. xev all these methods do not capture the key. Finally, I noticed that my internet key is recognized as home key: scan code: 0xB2 key code: homepage # should be www browser If you need more information, please, let me know Andrei ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-21-generic 2.6.32-21.32 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.22.1. Compiled on Apr 14 2010 for kernel 2.6.32-21-generic (SMP). Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC259 Analog [ALC259 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: and1386 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xd440 irq 34' Mixer name : 'Intel G45 DEVIBX' Components : 'HDA:10ec0270,103c1425,00100100 HDA:80862804,80860101,0010' Controls : 19 Simple ctrls : 9 Date: Sat Apr 24 14:05:06 2010 HibernationDevice: RESUME=UUID=37de556f-4572-42a5-96d9-806cc63ace6e InstallationMedia: Ubuntu 10.04 Lucid Lynx - Release Candidate amd64 (20100419.1) MachineType: Hewlett-Packard HP G62 Notebook PC ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=da3b0783-49bf-4dc8-aeee-10d2319a86f5 ro quiet splash ProcEnviron: PATH=(custom, user) LANG=en_CA.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 SourcePackage: linux dmi.bios.date: 02/10/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1425 dmi.board.vendor: Hewlett-Packard dmi.board.version: 54.13 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.07:bd02/10/2010:svnHewlett-Packard:pnHPG62NotebookPC:pvr0497102027162:rvnHewlett-Packard:rn1425:rvr54.13:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: HP G62 Notebook PC dmi.product.version: 0497102027162 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/569562/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages
[Kernel-packages] [Bug 1257539] Re: linux-armadaxp: 3.2.0-1629.41 -proposed tracker
** Description changed: This bug is for tracking the 3.2.0-1629.41 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 04. December 2013 00:26 UTC kernel-stable-master-bug:1257370 kernel-stable-Certification-testing-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Security-signoff-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Prepare-package-end:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-start:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-end:Thursday, 05. December 2013 19:05 UTC kernel-stable-Verification-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-Regression-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 06. December 2013 01:04 UTC kernel-stable-Verification-testing-end:Friday, 06. December 2013 01:04 UTC + kernel-stable-Regression-testing-end:Monday, 16. December 2013 16:03 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1257539 Title: linux-armadaxp: 3.2.0-1629.41 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow upload-to-ppa series: Fix Released Status in Kernel SRU Workflow verification-testing series: Fix Released Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-armadaxp” source package in Precise: In Progress Bug description: This bug is for tracking the 3.2.0-1629.41 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 04. December 2013 00:26 UTC kernel-stable-master-bug:1257370 kernel-stable-Certification-testing-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Security-signoff-end:Wednesday, 04. December 2013 03:05 UTC kernel-stable-Prepare-package-end:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-start:Thursday, 05. December 2013 10:06 UTC kernel-stable-Promote-to-proposed-end:Thursday, 05. December 2013 19:05 UTC kernel-stable-Verification-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-Regression-testing-start:Thursday, 05. December 2013 21:07 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 06. December 2013 01:04 UTC kernel-stable-Verification-testing-end:Friday, 06. December 2013 01:04 UTC kernel-stable-Regression-testing-end:Monday, 16. December 2013 16:03 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1257539/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 570434] Re: IRQ conflict with pci sata vt6421 with two hd
Oltion Kola, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: latest-bios-a05 needs-upstream-testing ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Summary changed: - IRQ conflict with pci sata vt6421 with two hd + [Dell Dimension 2400] IRQ conflict with pci sata vt6421 with two hard drives -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/570434 Title: [Dell Dimension 2400] IRQ conflict with pci sata vt6421 with two hard drives Status in “linux” package in Ubuntu: Incomplete Bug description: My computer hangs when booting because of a irq conflict. I have a PCI adapter for SATA drives with sata and usb ports with VT6421 chipset. When I put only one HD then the system is OK. When I boot up with two HD in the sata ports the system behaves badly. Most of the time it hangs (3 over 4 tries) in the 2 first seconds. I have tried the options in the irq debug guide but it does not help. Please, let me know if there is something I can do to debug the problem. Thanks ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-21-generic 2.6.32-21.32 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: olti 1268 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981B at irq 17' Mixer name : 'Analog Devices AD1981B' Components : 'AC97a:41445374' Controls : 26 Simple ctrls : 18 CurrentDmesg: [ 18.820236] b44: eth1: Link is up at 100 Mbps, full duplex. [ 18.820243] b44: eth1: Flow control is off for TX and off for RX. [ 18.820581] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 29.816170] eth1: no IPv6 routers present Date: Mon Apr 26 23:14:53 2010 HibernationDevice: RESUME=UUID=78bd97bc-8c7b-48b0-8c87-13780d942f8e InstallationMedia: Ubuntu 10.04 Lucid Lynx - Release Candidate i386 (20100419.1) IwConfig: lono wireless extensions. eth1 no wireless extensions. MachineType: Dell Computer Corporation Dimension 2400 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=d700ba56-8a55-4228-9d46-07468a334fe0 ro quiet splash ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34 RfKill: SourcePackage: linux dmi.bios.date: 12/02/2003 dmi.bios.vendor: Dell Computer Corporation dmi.bios.version: A05 dmi.board.name: 0G1548 dmi.board.vendor: Dell Computer Corp. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Computer Corporation dmi.modalias: dmi:bvnDellComputerCorporation:bvrA05:bd12/02/2003:svnDellComputerCorporation:pnDimension2400:pvr:rvnDellComputerCorp.:rn0G1548:rvrA00:cvnDellComputerCorporation:ct15:cvr: dmi.product.name: Dimension 2400 dmi.sys.vendor: Dell Computer Corporation To manage
[Kernel-packages] [Bug 571977] Re: [Lucid] Possible race condition involving rtc wakealarm when hibernating a system
Jeff Lane, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: bios-outdated-a09 ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Summary changed: - [Lucid] Possible race condition involving rtc wakealarm when hibernating a system + [Dell Alienware M15x] Possible race condition involving rtc wakealarm when hibernating a system -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/571977 Title: [Dell Alienware M15x] Possible race condition involving rtc wakealarm when hibernating a system Status in “linux” package in Ubuntu: Incomplete Bug description: I'm working on a test script that sets a time in the future in /sys/class/rtc/rtc0/wakealarm and then uses pm-suspend to hibernate a system. I believe I've found a race condition that's causing my tests to fail. First, the steps to recreate: 0: cat /proc/driver/rtc and verify that alarm_IRQ says 'no' 1: echo '+180' /sys/class/rtc/rtc0/wakealarm 1.5: cat /proc/driver/rtc and verify that alarm_IRQ says 'yes' and the correct alarm time is set 2: sudo pm-suspend 3: wait 3 minutes 4: system wakes itself 5: wait for system to fully wake (disk activity to stop, or at the very least, keyboard and mouse function to resume on desktop) 6: cat /proc/driver/rtc and verify that current time is alarm time and alarm_IRQ still says 'yes' The test, when putting the system into an S3 state, does not suffer from this issue. It DOES when I'm using S4. I think the reason is that S3 wakes quickly enough that the kernel can register that the alarm fired and reset /proc/driver/rtc accordingly, however, when waking from suspend, the kernel takes far longer to wake, causing it to think that even though the rtc's alarm_IRQ fired the IRQ didn't fire, so the kernel does not reset /proc/driver/rtc. For example, this is the output from (my comments highlighted with ## # watch -n 5 'cat /proc/driver/rtc |head -5' ## First observation, note alarm_date is empty, this is after echoing '0' to /sys/class/rtc/rtc0/wakealarm rtc_time: 20:35:11 rtc_date: 2010-04-29 alrm_time : 20:38:03 alrm_date : -**-29 alarm_IRQ : no ## wakealarm set rtc_time: 20:35:16 rtc_date: 2010-04-29 alrm_time : 20:37:11 alrm_date : 2010-04-29 alarm_IRQ : yes ## executing pm-hibernate now rtc_time: 20:35:21 rtc_date: 2010-04-29 alrm_time : 20:37:11 alrm_date : 2010-04-29 alarm_IRQ : yes rtc_time: 20:35:26 rtc_date: 2010-04-29 alrm_time : 20:37:11 alrm_date : 2010-04-29 alarm_IRQ : yes ## System is now asleep. ## IRQ must be firing, because system wakes itself at this point after sleeping for the proscribed number of seconds (180) rtc_time: 20:38:16 rtc_date: 2010-04-29 alrm_time : 20:37:11 alrm_date : 2010-04-30 alarm_IRQ : yes ## first report after system is fully awake. Note that rtc_time is now a full 60 seconds ahead of alarm time. I'm not sure what's actually causing this
[Kernel-packages] [Bug 567365] Re: Eject key on Mac Pro not working
** Tags added: lucid needs-kernel-logs needs-upstream-testing regression-release -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/567365 Title: Eject key on Mac Pro not working Status in Mactel Support: Confirmed Status in “linux” package in Ubuntu: Incomplete Bug description: I've found that on my Mac Pro (Edit: Mac Pro 3,1) running Ubuntu 10.04 x64 Beta 2 (completely updated as of April 20th 2010), the eject key on the keyboard doesn't eject the CD tray. However, on my Macbook, with the exact same software setup, the key does work. Update: As of Sept 14 2010, pressing the key will eject a CD, but will not retract the ejected tray. In both cases the eject image appears in the upper-right corner of the screen momentarily. Just that a CD will eject on the laptop (MacBook) machine and doesn't with the desktop. Edit: This had functioned correctly in 9.10 To manage notifications about this bug go to: https://bugs.launchpad.net/mactel-support/+bug/567365/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 566853] Re: megaraid_sas constantly reports errors
** Tags added: bios-outdated-6.4.0 needs-upstream-testing -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/566853 Title: megaraid_sas constantly reports errors Status in “linux” package in Ubuntu: Incomplete Bug description: I constantly (the following messages in the kernel log: [292669.990809] megasas: Failed to copy out to user sense data [292669.996343] megasas: Failed to copy out to user sense data [292670.002666] megasas: Failed to copy out to user sense data [292670.007732] megasas: Failed to copy out to user sense data This seems to be a know bug, with a patch: https://bugzilla.kernel.org/show_bug.cgi?id=15001 I do not know if this affects the stability of the system, as it is not under heavy load. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-21-server 2.6.32-21.32 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-21.31-server 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-server x86_64 AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access /dev/snd/: No such file or directory AplayDevices: Error: [Errno 2] No such file or directory Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory Date: Mon Apr 19 20:55:49 2010 MachineType: Dell Inc. PowerEdge R710 PciMultimedia: ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-21-server root=/dev/mapper/sig14--kvm1--2-root ro quiet splash ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: linux dmi.bios.date: 07/17/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.6 dmi.board.name: 0PV9DG dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 23 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.6:bd07/17/2009:svnDellInc.:pnPowerEdgeR710:pvr:rvnDellInc.:rn0PV9DG:rvrA01:cvnDellInc.:ct23:cvr: dmi.product.name: PowerEdge R710 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/566853/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 578979] [NEW] blank screen after fast-user switch
You have been subscribed to a public bug: Binary package hint: gnome-screensaver This may be a duplicate of https://bugs.launchpad.net/bugs/112518 But it's happening with ubuntu 10.04. Here's the description. Log with user A via gdm. Set the screensaver to 1min (blank screen or whatever). fast-switch to user B. wait more than 1 min. Fast-switch to user A. = the screen is blank, no message from gnome-screensaver to unlock. There's only the mouse pointer. I can still switch to console with ALT-Fx, but the screen is blank (I have to type blinded). If I restart gdm, the screen is back. When this happened, I could see via ssh that the gnome-screensaver process of user A launched gnome-screensaver-dialog process with argument --enable-switch and --status-message= I uninstalled gnome-screensaver, made sure its processes were not running and try this: Log with user A via gdm. Set the power-manager to switch off the screen after 1 min. fast-switch to user B. wait more than 1 min. Fast-switch to user A. And the screen was OK. my video card is ATI Technologies Inc RV710 [Radeon HD 4350] and I'm using KMS (default lucid configuration). I'm not using compiz or anything related to visual effects. package: gnome-screensaver 2.30.0-0ubuntu1 ** Affects: linux (Ubuntu) Importance: Medium Status: Incomplete -- blank screen after fast-user switch https://bugs.launchpad.net/bugs/578979 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 577219] [NEW] named switch user does not allow to return to current user
You have been subscribed to a public bug: Binary package hint: indicator-applet I refer to to panel menue where i can choose different actions as guest session, Log Out... or Switch From user Additional users are listed there by their name. If i click on such an entry, a new login dialog appears (such like the normal gdm, but this time only with the previously selected user). After specifying the correct password, the new session for this user starts. If i now choose Log Out... from the same panel menue, the screen turns just black. It is not possible to switch to another tty by pressing CRTL-ALT-Fx. The only way to get out of this situation is to power off. This problem does not occour if 1. i choose Switch From user 2. select the desired user in the gdm dialog 3. select Log Out... Now the password is requested for the previous user. System is an Laptop Acer Extensa 5635Z ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: indicator-applet-session 0.3.6-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 Architecture: amd64 CheckboxSubmission: 06f8f0bfd32794bbacd433bf1b762a08 CheckboxSystem: 2954e74ba17fb0e37fc942cd1d9fab4e Date: Sat May 8 00:14:47 2010 ExecutablePath: /usr/lib/indicator-applet/indicator-applet-session InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027) ProcEnviron: LANG=en_US.utf8 PATH=(custom, user) SHELL=/bin/bash SourcePackage: indicator-applet XsessionErrors: (polkit-gnome-authentication-agent-1:2263): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (nm-applet:2282): Gdk-CRITICAL **: gdk_window_thaw_toplevel_updates_libgtk_only: assertion `private-update_and_descendants_freeze_count 0' failed (gnome-terminal:2602): Gtk-CRITICAL **: gtk_accel_map_unlock_path: assertion `entry != NULL entry-lock_count 0' failed ** Affects: linux (Ubuntu) Importance: Medium Status: Incomplete ** Tags: amd64 apport-bug lucid -- named switch user does not allow to return to current user https://bugs.launchpad.net/bugs/577219 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 574909] [NEW] Getting a black/blank screen when switching between users in lucid
You have been subscribed to a public bug: Binary package hint: fast-user-switch-applet Not sure this is the right applet, but it seems to be affecting a number of people. 1) Ubuntu 10.04 LTS (lucid) 2) Unknown (I assumed fast-user-switch-applet, but I can't find a version number for it, so maybe this isn't part of Lucid?) 3) Switching between 2 users repeatedly should work 4) It fails after 1-3 switches with a black/blank screen Steps to repeat: - Boot ubuntu and login to user A - Then Click on power menu (top right corner) and select: Switch from A - I get the login screen - I select user B and enter my password - I hit ok - I am able to login successfully to user B - Now, I Click on power menu (top right corner) and select: Switch from B - I select user A from the login screen and enter my credentials, then hit OK - I get a black screen Alternatively: - Boot ubuntu and login to user A - Then Click on power menu (top right corner) and select: Switch from A... Select B - I get the login screen - I hit ok - I am able to login successfully to user B - Now, I Click on power menu (top right corner) and select: Switch from B... Select A - I get a black screen In my case, Ctrl+Alt+F1-6 is black as well. The computer is NOT hung, I can type blindly and shut down fine. More details: http://ubuntuforums.org/showthread.php?t=1471915 http://ubuntuforums.org/showthread.php?t=1467619 Might be related to this bug reported against Jaunty? https://bugs.launchpad.net/ubuntu/+source/fast-user-switch-applet/+bug/354083 ** Affects: linux (Ubuntu) Importance: Medium Status: Incomplete -- Getting a black/blank screen when switching between users in lucid https://bugs.launchpad.net/bugs/574909 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 570687] [NEW] screen becomes black when switching users two times
You have been subscribed to a public bug: Binary package hint: gdm Steps to reproduce (asusming that there are users A, B, C): 1) Boot the system 2) Login as A 3) Switch to B using the fast switch applet 4) Enter the password for B 5) Switch to A using the fast switch applet 6) The display where the unlock dialog should appear is black (sometimes still visible but with only 20 or 10% opacity, so it's nearly unreadable). No way to get it bright again. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: gdm 2.30.0-0ubuntu5 ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 Architecture: amd64 Date: Tue Apr 27 14:51:32 2010 InstallationMedia: Ubuntu 10.04 Lucid Lynx - Release Candidate amd64 (20100419.1) ProcEnviron: LANG=de_AT.utf8 SHELL=/bin/bash SourcePackage: gdm ** Affects: linux (Ubuntu) Importance: Medium Status: Incomplete ** Tags: amd64 apport-bug lucid -- screen becomes black when switching users two times https://bugs.launchpad.net/bugs/570687 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 578979] Re: blank screen after fast-user switch
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/578979 Title: blank screen after fast-user switch Status in “linux” package in Ubuntu: Incomplete Bug description: Binary package hint: gnome-screensaver This may be a duplicate of https://bugs.launchpad.net/bugs/112518 But it's happening with ubuntu 10.04. Here's the description. Log with user A via gdm. Set the screensaver to 1min (blank screen or whatever). fast-switch to user B. wait more than 1 min. Fast-switch to user A. = the screen is blank, no message from gnome-screensaver to unlock. There's only the mouse pointer. I can still switch to console with ALT-Fx, but the screen is blank (I have to type blinded). If I restart gdm, the screen is back. When this happened, I could see via ssh that the gnome-screensaver process of user A launched gnome-screensaver-dialog process with argument --enable-switch and --status-message= I uninstalled gnome-screensaver, made sure its processes were not running and try this: Log with user A via gdm. Set the power-manager to switch off the screen after 1 min. fast-switch to user B. wait more than 1 min. Fast-switch to user A. And the screen was OK. my video card is ATI Technologies Inc RV710 [Radeon HD 4350] and I'm using KMS (default lucid configuration). I'm not using compiz or anything related to visual effects. package: gnome-screensaver 2.30.0-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/578979/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 578979] Re: blank screen after fast-user switch
Richard Genoud, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Package changed: gnome-screensaver (Ubuntu) = linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/578979 Title: blank screen after fast-user switch Status in “linux” package in Ubuntu: Incomplete Bug description: Binary package hint: gnome-screensaver This may be a duplicate of https://bugs.launchpad.net/bugs/112518 But it's happening with ubuntu 10.04. Here's the description. Log with user A via gdm. Set the screensaver to 1min (blank screen or whatever). fast-switch to user B. wait more than 1 min. Fast-switch to user A. = the screen is blank, no message from gnome-screensaver to unlock. There's only the mouse pointer. I can still switch to console with ALT-Fx, but the screen is blank (I have to type blinded). If I restart gdm, the screen is back. When this happened, I could see via ssh that the gnome-screensaver process of user A launched gnome-screensaver-dialog process with argument --enable-switch and --status-message= I uninstalled gnome-screensaver, made sure its processes were not running and try this: Log with user A via gdm. Set the power-manager to switch off the screen after 1 min. fast-switch to user B. wait more than 1 min. Fast-switch to user A. And the screen was OK. my video card is ATI Technologies Inc RV710 [Radeon HD 4350] and I'm using KMS (default lucid configuration). I'm not using compiz or anything related to visual effects. package: gnome-screensaver 2.30.0-0ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/578979/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 574909] Re: Getting a black/blank screen when switching between users in lucid
Jeremy Yoder, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** This bug is no longer a duplicate of bug 546578 black screen after a few user switches ** Package changed: fast-user-switch-applet (Ubuntu) = linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/574909 Title: Getting a black/blank screen when switching between users in lucid Status in “linux” package in Ubuntu: Incomplete Bug description: Binary package hint: fast-user-switch-applet Not sure this is the right applet, but it seems to be affecting a number of people. 1) Ubuntu 10.04 LTS (lucid) 2) Unknown (I assumed fast-user-switch-applet, but I can't find a version number for it, so maybe this isn't part of Lucid?) 3) Switching between 2 users repeatedly should work 4) It fails after 1-3 switches with a black/blank screen Steps to repeat: - Boot ubuntu and login to user A - Then Click on power menu (top right corner) and select: Switch from A - I get the login screen - I select user B and enter my password - I hit ok - I am able to login successfully to user B - Now, I Click on power menu (top right corner) and select: Switch from B - I select user A from the login screen and enter my credentials, then hit OK - I get a black screen Alternatively: - Boot ubuntu and login to user A - Then Click on power menu (top right corner) and select: Switch from A... Select B - I get the login screen - I hit ok - I am able to login successfully to user B - Now, I Click on power menu (top right corner) and select: Switch from B... Select A - I get a black screen In my case, Ctrl+Alt+F1-6 is black as well. The computer is NOT hung, I can type blindly and shut down fine. More details: http://ubuntuforums.org/showthread.php?t=1471915 http://ubuntuforums.org/showthread.php?t=1467619 Might be related to this bug reported against Jaunty? https://bugs.launchpad.net/ubuntu/+source/fast-user-switch-applet/+bug/354083 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/574909/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 577219] Re: named switch user does not allow to return to current user
Henning Moll, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** This bug is no longer a duplicate of bug 546578 black screen after a few user switches ** Package changed: indicator-applet (Ubuntu) = linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/577219 Title: named switch user does not allow to return to current user Status in “linux” package in Ubuntu: Incomplete Bug description: Binary package hint: indicator-applet I refer to to panel menue where i can choose different actions as guest session, Log Out... or Switch From user Additional users are listed there by their name. If i click on such an entry, a new login dialog appears (such like the normal gdm, but this time only with the previously selected user). After specifying the correct password, the new session for this user starts. If i now choose Log Out... from the same panel menue, the screen turns just black. It is not possible to switch to another tty by pressing CRTL-ALT-Fx. The only way to get out of this situation is to power off. This problem does not occour if 1. i choose Switch From user 2. select the desired user in the gdm dialog 3. select Log Out... Now the password is requested for the previous user. System is an Laptop Acer Extensa 5635Z ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: indicator-applet-session 0.3.6-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-22-generic x86_64 Architecture: amd64 CheckboxSubmission: 06f8f0bfd32794bbacd433bf1b762a08 CheckboxSystem: 2954e74ba17fb0e37fc942cd1d9fab4e Date: Sat May 8 00:14:47 2010 ExecutablePath: /usr/lib/indicator-applet/indicator-applet-session InstallationMedia: Ubuntu 9.10 Karmic Koala - Release amd64 (20091027) ProcEnviron: LANG=en_US.utf8 PATH=(custom, user) SHELL=/bin/bash SourcePackage: indicator-applet XsessionErrors: (polkit-gnome-authentication-agent-1:2263): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (nm-applet:2282): Gdk-CRITICAL **: gdk_window_thaw_toplevel_updates_libgtk_only: assertion `private-update_and_descendants_freeze_count 0' failed (gnome-terminal:2602): Gtk-CRITICAL **: gtk_accel_map_unlock_path: assertion `entry != NULL entry-lock_count 0' failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/577219/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 570687] Re: screen becomes black when switching users two times
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/570687 Title: screen becomes black when switching users two times Status in “linux” package in Ubuntu: Incomplete Bug description: Binary package hint: gdm Steps to reproduce (asusming that there are users A, B, C): 1) Boot the system 2) Login as A 3) Switch to B using the fast switch applet 4) Enter the password for B 5) Switch to A using the fast switch applet 6) The display where the unlock dialog should appear is black (sometimes still visible but with only 20 or 10% opacity, so it's nearly unreadable). No way to get it bright again. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: gdm 2.30.0-0ubuntu5 ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 Architecture: amd64 Date: Tue Apr 27 14:51:32 2010 InstallationMedia: Ubuntu 10.04 Lucid Lynx - Release Candidate amd64 (20100419.1) ProcEnviron: LANG=de_AT.utf8 SHELL=/bin/bash SourcePackage: gdm To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/570687/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 570687] Re: screen becomes black when switching users two times
amay82, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com /daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Package changed: gdm (Ubuntu) = linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/570687 Title: screen becomes black when switching users two times Status in “linux” package in Ubuntu: Incomplete Bug description: Binary package hint: gdm Steps to reproduce (asusming that there are users A, B, C): 1) Boot the system 2) Login as A 3) Switch to B using the fast switch applet 4) Enter the password for B 5) Switch to A using the fast switch applet 6) The display where the unlock dialog should appear is black (sometimes still visible but with only 20 or 10% opacity, so it's nearly unreadable). No way to get it bright again. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: gdm 2.30.0-0ubuntu5 ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 Uname: Linux 2.6.32-21-generic x86_64 Architecture: amd64 Date: Tue Apr 27 14:51:32 2010 InstallationMedia: Ubuntu 10.04 Lucid Lynx - Release Candidate amd64 (20100419.1) ProcEnviron: LANG=de_AT.utf8 SHELL=/bin/bash SourcePackage: gdm To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/570687/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 561538] Re: Logout after switch user cause black screen
Lê Kiến Trúc, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc3 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** This bug is no longer a duplicate of bug 546578 black screen after a few user switches ** Package changed: nvidia-graphics-drivers (Ubuntu) = linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/561538 Title: Logout after switch user cause black screen Status in “linux” package in Ubuntu: Incomplete Bug description: [Copycat - A blackscreen can also appear due to a bug in the ATI driver - workaround involving gnome-screensaver. (goto bug #546578)] Binary package hint: nvidia-graphics-drivers I have this bug on both my computer and my laptop. This effect me scine Ubuntu Lucid 10.04 alpha to now Beta 2 with all upgrade. Steps to reproduce: 1. Login to user A. 2. Choose switch user from User A. 3. Login to user B. 4. Logout from user B. After that the screen just go blank. The music from Rhythmbox of user A still playing, I can't swith to tty1 (by ctrl + alt + F1), but I can use the Magic SysRq key to reboot the system. In my laptop it's usally happen, it rarely happen but exist in my computer. I think this bug is very critical because I need to use many user for testing application and translation of ubuntu. There aren't any logs in my computer (except something about Pulse before the crash). And in my laptop has some logs From kern.log Apr 12 20:06:47 truclk60145 kernel: [ 294.139885] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id From the daemon.log Apr 12 20:06:28 truclk60145 gdm-simple-slave[1994]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Apr 12 20:06:29 truclk60145 acpid: client 1137[0:0] has disconnected Apr 12 20:06:29 truclk60145 acpid: client connected from 1997[0:0] Apr 12 20:06:29 truclk60145 acpid: 1 client rule loaded Apr 12 20:06:32 truclk60145 gdm-session-worker[2037]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Apr 12 20:06:32 truclk60145 rtkit-daemon[1498]: Sucessfully made thread 2040 of process 2040 (n/a) owned by '114' high priority at nice level -11. Apr 12 20:06:32 truclk60145 rtkit-daemon[1498]: Supervising 4 threads of 2 processes of 2 users. Apr 12 20:06:32 truclk60145 gdm-simple-greeter[2032]: Gtk-WARNING: /build/buildd/gtk+2.0-2.20.0/gtk/gtkwidget.c:5636: widget not within a GtkWindow Apr 12 20:06:33 truclk60145 rtkit-daemon[1498]: Sucessfully made thread 2045 of process 2040 (n/a) owned by '114' RT at priority 5. Apr 12 20:06:33 truclk60145 rtkit-daemon[1498]: Supervising 5 threads of 2 processes of 2 users. Apr 12 20:06:33 truclk60145 rtkit-daemon[1498]: Sucessfully made thread 2047 of process 2040 (n/a) owned by '114' RT at priority 5. Apr 12 20:06:33 truclk60145 rtkit-daemon[1498]: Supervising 6 threads of 2 processes of 2 users. Apr 12 20:06:33 truclk60145 gdm-session-worker[2037]: GLib-GObject-CRITICAL: g_value_get_boolean: assertion `G_VALUE_HOLDS_BOOLEAN (value)' failed Apr 12 20:06:36 truclk60145 rtkit-daemon[1498]: Sucessfully made thread 2140 of
[Kernel-packages] [Bug 1218004] Re: Apple Wireless Trackpad causes kernel oops
Hi Brian, Upstream has a patch that may fix this issue without a revert. Do you still have access to the hw to reproduce this bug? If so, do you think you can test a kernel to see if the patch from upstream does address the bug? [0] http://www.kernelhub.org/?msg=380901p=2 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1218004 Title: Apple Wireless Trackpad causes kernel oops Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Released Bug description: This seems to happen whenever I connect my Apple Wireless Trackpad and use it. The system hardlocks and I have to force a reboot. ProblemType: KernelOopsDistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-4-generic 3.11.0-4.9 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: bdmurray 2546 F pulseaudio /dev/snd/controlC0: bdmurray 2546 F pulseaudio Date: Wed Aug 28 10:16:41 2013 EcryptfsInUse: Yes Failure: oops HibernationDevice: RESUME=UUID=24b89185-eb5d-476c-ba6d-d71b78071334 InstallationDate: Installed on 2013-01-16 (224 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130116) MachineType: System manufacturer System Product Name MarkForUpload: True OopsText: ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-4-generic root=/dev/mapper/ubuntu--vg-root ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu3 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: noSourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-07-15 (43 days ago) dmi.bios.date: 07/27/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1106 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z77-V LX dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1106:bd07/27/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8Z77-VLX:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218004/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1250828] Re: freeze on diskIO without real IO
uname -a Linux Ubunto4ka 3.12.5-031205-generic #201312120254 SMP Thu Dec 12 07:55:20 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux from http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.12.5-trusty/ cat /var/log/syslog |grep -A 35 blocked Dec 6 16:12:23 Ubunto4ka kernel: [95836.316381] INFO: task mozStorage #8:8285 blocked for more than 5 seconds. Dec 6 16:12:23 Ubunto4ka kernel: [95836.316385] Tainted: PFC O 3.12.2-031202-generic #201311291538 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316385] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. Dec 6 16:12:23 Ubunto4ka kernel: [95836.316387] mozStorage #8 D 81811d80 0 8285 7860 0x Dec 6 16:12:23 Ubunto4ka kernel: [95836.316390] 880062f21d28 0002 8801389e2b40 8800371e0f30 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316392] 880062f21fd8 880062f21fd8 880062f21fd8 00014500 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316394] 880139378000 88006d025ec0 880062f21d38 8800ba5f8000 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316397] Call Trace: Dec 6 16:12:23 Ubunto4ka kernel: [95836.316402] [8174dbb9] schedule+0x29/0x70 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316423] [a009d30c] wait_log_commit.isra.21+0x10c/0x130 [btrfs] Dec 6 16:12:23 Ubunto4ka kernel: [95836.316427] [8108d2a0] ? add_wait_queue+0x60/0x60 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316437] [a00a2ed2] btrfs_sync_log+0x442/0x6d0 [btrfs] Dec 6 16:12:23 Ubunto4ka kernel: [95836.316440] [811d6ac0] ? dput+0x20/0x90 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316449] [a0077b9b] btrfs_sync_file+0x27b/0x2e0 [btrfs] Dec 6 16:12:23 Ubunto4ka kernel: [95836.316452] [811ef2eb] vfs_fsync+0x2b/0x40 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316454] [812c827d] ecryptfs_fsync+0x3d/0x50 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316456] [811ef3cd] do_fsync+0x5d/0x90 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316457] [811ef7b0] SyS_fsync+0x10/0x20 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316459] [817587ff] tracesys+0xe1/0xe6 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316461] INFO: task mozStorage #11:7286 blocked for more than 5 seconds. Dec 6 16:12:23 Ubunto4ka kernel: [95836.316462] Tainted: PFC O 3.12.2-031202-generic #201311291538 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316463] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. Dec 6 16:12:23 Ubunto4ka kernel: [95836.316464] mozStorage #11 D 81811d80 0 7286 7860 0x Dec 6 16:12:23 Ubunto4ka kernel: [95836.316466] 880008ce3d28 0002 8801389a4000 880037120c60 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316468] 880008ce3fd8 880008ce3fd8 880008ce3fd8 00014500 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316470] 88013935dec0 880008a9 880008ce3d38 8800ba5f8000 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316472] Call Trace: Dec 6 16:12:23 Ubunto4ka kernel: [95836.316474] [8174dbb9] schedule+0x29/0x70 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316483] [a009d30c] wait_log_commit.isra.21+0x10c/0x130 [btrfs] Dec 6 16:12:23 Ubunto4ka kernel: [95836.316485] [8108d2a0] ? add_wait_queue+0x60/0x60 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316494] [a00a2ed2] btrfs_sync_log+0x442/0x6d0 [btrfs] Dec 6 16:12:23 Ubunto4ka kernel: [95836.316496] [811d6ac0] ? dput+0x20/0x90 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316505] [a0077b9b] btrfs_sync_file+0x27b/0x2e0 [btrfs] Dec 6 16:12:23 Ubunto4ka kernel: [95836.316507] [811ef2eb] vfs_fsync+0x2b/0x40 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316509] [812c827d] ecryptfs_fsync+0x3d/0x50 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316510] [811ef3cd] do_fsync+0x5d/0x90 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316512] [811ef7b0] SyS_fsync+0x10/0x20 Dec 6 16:12:23 Ubunto4ka kernel: [95836.316513] [817587ff] tracesys+0xe1/0xe6 Dec 6 16:12:28 Ubunto4ka kernel: [95841.315297] INFO: task Cache I/O:8165 blocked for more than 5 seconds. Dec 6 16:12:28 Ubunto4ka kernel: [95841.315300] Tainted: PFC O 3.12.2-031202-generic #201311291538 Dec 6 16:12:28 Ubunto4ka kernel: [95841.315301] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. Dec 6 16:12:28 Ubunto4ka kernel: [95841.315302] Cache I/O D 81811d80 0 8165 7860 0x Dec 6 16:12:28 Ubunto4ka kernel: [95841.315305] 880122501d28 0002 880037250be0 880138917b40 Dec 6 16:12:28 Ubunto4ka kernel: [95841.315308] 880122501fd8 880122501fd8 880122501fd8 00014500 Dec 6 16:12:28 Ubunto4ka kernel: [95841.315310] 81c144a0 8801289e97b0 880122501d38 8800ba5f8000 Dec 6 16:12:28 Ubunto4ka kernel: [95841.315313] Call Trace: Dec 6 16:12:28
[Kernel-packages] [Bug 1261039] Re: package linux-image-3.2.0-56-generic 3.2.0-56.86 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
You may need to run the following: sudo apt-get install -f sudo apt-get clean sudo apt-get update Then re-install the package. If that does not resolve your issue, please mark the bug as Confirmed ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261039 Title: package linux-image-3.2.0-56-generic 3.2.0-56.86 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 Status in “linux” package in Ubuntu: Incomplete Bug description: boot partition was full during the preceding installation of the linux-image-3.2.0-56-generic 3.2.0-56. From my memory a message appears saying unable to unpack... ProblemType: Package DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-56-generic 3.2.0-56.86 ProcVersionSignature: Ubuntu 3.2.0-55.85-generic 3.2.51 Uname: Linux 3.2.0-55-generic x86_64 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pascal31044 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Card0.Amixer.info: Card hw:0 'SB'/'HDA ATI SB at 0xfe024000 irq 16' Mixer name : 'Realtek ALC889' Components : 'HDA:10ec0889,1458a102,0014' Controls : 49 Simple ctrls : 23 Date: Sat Dec 14 22:05:19 2013 DuplicateSignature: package:linux-image-3.2.0-56-generic:3.2.0-56.86:subprocess installed post-installation script returned error exit status 2 ErrorMessage: subprocess installed post-installation script returned error exit status 2 HibernationDevice: RESUME=UUID=6bffaba2-0b8b-4f68-a056-46adf3cef99a InstallationMedia: Ubuntu 10.04.3 LTS Lucid Lynx - Release amd64 (20110720.1) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Gigabyte Technology Co., Ltd. GA-870A-UD3 MarkForUpload: True ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-55-generic root=UUID=21a54d98-25ed-4155-acc9-b58362249372 ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 1.99-21ubuntu3.10 RfKill: SourcePackage: linux Title: package linux-image-3.2.0-56-generic 3.2.0-56.86 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 UpgradeStatus: Upgraded to precise on 2012-09-12 (458 days ago) dmi.bios.date: 01/07/2011 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FA dmi.board.name: GA-870A-UD3 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFA:bd01/07/2011:svnGigabyteTechnologyCo.,Ltd.:pnGA-870A-UD3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-870A-UD3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: GA-870A-UD3 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261039/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261195] Re: Kubuntu 13.10 AMD64 asus eeepc 1810 - no wireless connection
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.13-rc4-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Tags added: regression-release -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261195 Title: Kubuntu 13.10 AMD64 asus eeepc 1810 - no wireless connection Status in “linux” package in Ubuntu: Incomplete Bug description: I have an Asus eeepc 1018P that worked correctly with Kubuntu 11.10 AMD64. When I tried to upgrade to the last version I lost the wireless functionality: in the network-manager widget no network is listed (I have done all the test at 1 meter from the access point - all other devices in my house connect regularly to this network) using wifi-radar no network is listed. I tried different versions from the install CD or installed on HD. Here the results: Ubuntu 13.10 AMD64 from CD - NO NETWORK LISTED Kubuntu 13.10 AMD64 from CD - NO NETWORK LISTED Kubuntu 13.10 AMD64 from HD - NO NETWORK LISTED Kubuntu 12.10 AMD64 from CD - SUCCESS I see the networks and I'm able to connect to the access point Kubuntu 12.10 AMD64 from HD - NO NETWORK LISTED The strange thing is that 12.10 worked when booted from the installer CD; bun once installed on the HD after the reboot the networks are missing. What can I try? --- ApportVersion: 2.6.1-0ubuntu13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: enrico 1803 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CurrentDmesg: [ 16.554300] asus_wmi: Backlight controlled by ACPI video driver [ 17.038341] init: plymouth-stop pre-start process (1206) terminated with status 1 DistroRelease: Ubuntu 12.10 HibernationDevice: RESUME=UUID=4da44a90-16a0-47d9-ba39-d5dd130ed763 InstallationDate: Installed on 2013-12-15 (0 days ago) InstallationMedia: Kubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.1) MachineType: ASUSTeK Computer INC. 1018P MarkForUpload: True NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=83c3f6c8-ff23-4a17-8f8a-2e8798df950e ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5 RelatedPackageVersions: linux-restricted-modules-3.5.0-17-generic N/A linux-backports-modules-3.5.0-17-generic N/A linux-firmware1.95 Tags: quantal Uname: Linux 3.5.0-17-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/25/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0502 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 1018P dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: x.xx dmi.chassis.asset.tag: 0x dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer INC. dmi.chassis.version: x.x dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0502:bd08/25/2010:svnASUSTeKComputerINC.:pn1018P:pvrx.x:rvnASUSTeKComputerINC.:rn1018P:rvrx.xx:cvnASUSTeKComputerINC.:ct10:cvrx.x: dmi.product.name: 1018P dmi.product.version: x.x dmi.sys.vendor: ASUSTeK Computer INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261195/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261129] Re: [SVF13N1L2ES] keyboard and touchpad do not work after resume from suspend
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.13-rc4-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261129 Title: [SVF13N1L2ES] keyboard and touchpad do not work after resume from suspend Status in “linux” package in Ubuntu: Incomplete Bug description: This has happened for the first time now, all previous cycles had no problems. Will update report with info on frequency of issue. Not working means that laptop shows no response to keypresses or touchpad use. No response to hotkeys either (i.e. Fn-x presses). Volume rocker at the side of the laptop doesn't work either. However, touchscreen and digitizer continue to work. A second suspend-resume fixes the issue. I'm attaching a dmesg log from after the second resume. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-14-generic 3.11.0-14.21 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: daniel 1913 F pulseaudio /dev/snd/controlC0: daniel 1913 F pulseaudio Date: Sun Dec 15 12:29:13 2013 InstallationDate: Installed on 2013-12-13 (1 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: Sony Corporation SVF13N1L2ES MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-14-generic.efi.signed root=UUID=cbdfd3fb-5ace-4e58-b7b9-28c13927062b ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-14-generic N/A linux-backports-modules-3.11.0-14-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/25/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0220VA dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0220VA:bd11/25/2013:svnSonyCorporation:pnSVF13N1L2ES:pvrC10JH1TU:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVF13N1L2ES dmi.product.version: C10JH1TU dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261129/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261308] Re: Intel ivy bridge crash on a CI machine executing autopilot tests
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.13-rc4-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = High ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Tags added: kernel-key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261308 Title: Intel ivy bridge crash on a CI machine executing autopilot tests Status in “linux” package in Ubuntu: Incomplete Bug description: A following crash was gotten in CI when running autopilot tests: /var/local/autopilot/autopilot.log: 06:25:06.559 DEBUG globals:155 - Starting: ['/usr/bin/recordmydesktop', '--fps=6', '--no-wm-check', '--no-sound', '--no-frame', '-o', '/var/local/autopilot//videos/autopilot.tests.functional.test_input_stack.TouchGesturesTests.test_pinch_gesture.ogv'] /var/local/autopilot/autopilot.log: 06:25:06.569 INFO __init__:162 - Launching process: ['/usr/bin/qmlscene', '-qt=qt5', '-testability', '/tmp/tmpyErdkz.qml'] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.717922] kernel BUG at /build/buildd/linux-3.12.0/drivers/gpu/drm/i915/i915_gem.c:4839! /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.736780] Modules linked in: bluetooth veth squashfs aufs nls_utf8 isofs xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc iptable_filter ip_tables x_tables x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw snd_hda_codec_hdmi gf128mul snd_hda_codec_realtek ablk_helper cryptd i915 drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit mxm_wmi mei_me snd_timer snd mei soundcore psmouse serio_raw joydev lpc_ich microcode wmi mac_hid video lp parport hid_generic usbhid hid e1000e ahci ptp libahci pps_core /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.822345] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0097.2012.1228.1346 12/28/2012 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.851440] EIP: 0060:[f901d776] EFLAGS: 00210246 CPU: 2 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.880754] EAX: e6b90270 EBX: e6b90270 ECX: ed4b4000 EDX: ed4b55e0 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.910940] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.941836] Stack: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.973256] e8921c00 00b4 00c0 e6b90294 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.005758] Call Trace: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.037812] [c130a8ec] ? _copy_from_user+0x2c/0x40 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.070637] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.104147] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.137652] [f8e2c430] ? drm_copy_field+0x70/0x70 [drm] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.171153] [c16561af] ? __do_page_fault+0x24f/0x530 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.204938] [c11826c0] SyS_ioctl+0x60/0x80 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.238719] Code: 39 50 f4 8d 48 cc 75 0a eb 1b 8d 76 00 39 50 f4 74 13 8b 41 34 39 c3 8d 48 cc 75 f1 b8 ff ff ff ff 5b 5d c3 90 8b 41 18 5b 5d c3 0f 0b 90 8d b4 26 00 00 00 00 55 89 e5 56 53 3e 8d 74 26 00 8b /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.367196] ---[ end trace d36900663c323dfa ]--- /var/local/autopilot/autopilot.log: 06:25:33.001 ERROR proxies:410 - Introspect error on :1.180:/com/canonical/Autopilot/Introspection: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did
[Kernel-packages] [Bug 1261308] Re: Intel ivy bridge crash on a CI machine executing autopilot tests
Also, it would be helpful if you could attach the apport logs with the command: apport-collect 1261308 That just makes it easier for other folks that may be affected by this to review similar log messages in the bug report. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261308 Title: Intel ivy bridge crash on a CI machine executing autopilot tests Status in “linux” package in Ubuntu: Incomplete Bug description: A following crash was gotten in CI when running autopilot tests: /var/local/autopilot/autopilot.log: 06:25:06.559 DEBUG globals:155 - Starting: ['/usr/bin/recordmydesktop', '--fps=6', '--no-wm-check', '--no-sound', '--no-frame', '-o', '/var/local/autopilot//videos/autopilot.tests.functional.test_input_stack.TouchGesturesTests.test_pinch_gesture.ogv'] /var/local/autopilot/autopilot.log: 06:25:06.569 INFO __init__:162 - Launching process: ['/usr/bin/qmlscene', '-qt=qt5', '-testability', '/tmp/tmpyErdkz.qml'] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.717922] kernel BUG at /build/buildd/linux-3.12.0/drivers/gpu/drm/i915/i915_gem.c:4839! /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.736780] Modules linked in: bluetooth veth squashfs aufs nls_utf8 isofs xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc iptable_filter ip_tables x_tables x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw snd_hda_codec_hdmi gf128mul snd_hda_codec_realtek ablk_helper cryptd i915 drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit mxm_wmi mei_me snd_timer snd mei soundcore psmouse serio_raw joydev lpc_ich microcode wmi mac_hid video lp parport hid_generic usbhid hid e1000e ahci ptp libahci pps_core /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.822345] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0097.2012.1228.1346 12/28/2012 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.851440] EIP: 0060:[f901d776] EFLAGS: 00210246 CPU: 2 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.880754] EAX: e6b90270 EBX: e6b90270 ECX: ed4b4000 EDX: ed4b55e0 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.910940] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.941836] Stack: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22506.973256] e8921c00 00b4 00c0 e6b90294 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.005758] Call Trace: /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.037812] [c130a8ec] ? _copy_from_user+0x2c/0x40 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.070637] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.104147] [f9024990] ? i915_gem_execbuffer+0x560/0x560 [i915] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.137652] [f8e2c430] ? drm_copy_field+0x70/0x70 [drm] /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.171153] [c16561af] ? __do_page_fault+0x24f/0x530 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.204938] [c11826c0] SyS_ioctl+0x60/0x80 /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.238719] Code: 39 50 f4 8d 48 cc 75 0a eb 1b 8d 76 00 39 50 f4 74 13 8b 41 34 39 c3 8d 48 cc 75 f1 b8 ff ff ff ff 5b 5d c3 90 8b 41 18 5b 5d c3 0f 0b 90 8d b4 26 00 00 00 00 55 89 e5 56 53 3e 8d 74 26 00 8b /var/log/syslog: Dec 16 06:25:07 trusty-i386-20131216-0008 kernel: [22507.367196] ---[ end trace d36900663c323dfa ]--- /var/local/autopilot/autopilot.log: 06:25:33.001 ERROR proxies:410 - Introspect error on :1.180:/com/canonical/Autopilot/Introspection: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. /var/local/autopilot/autopilot.log: 06:25:33.001 DEBUG proxies:413 - Executing introspect queue due to error /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:32 unity unknown:0 Failed to fetch xid: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity unknown:0 Failed to fetch type: Timeout was reached /home/ubuntu/.cache/upstart/gnome-session.log: WARN 2013-12-16 06:25:33 unity
[Kernel-packages] [Bug 557779] [NEW] switch from... option results in lost x sessions
You have been subscribed to a public bug: I'm running Lucid 64bit, installing updates every day. I have two users on my machine, and I switch between them using the indicator applet. Sometimes, the switch works without issue. Sometimes, the switched-to session does not appear, and the screen is black until I find the first session by trying control-shift-f7, control-shift-f8, etc. Other times, I switch, the second session does not appear, and I can't find the first session, either, and I have to restart gdm from control-shift-f1. Still other times, I can't reach any virtual terminal -- all are black -- and I have to break out of the situation by ssh'ing in from another machine on my network. I realize that this bug may well not be with the indicator applet, but the applet is where I'm triggering it. ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete -- switch from... option results in lost x sessions https://bugs.launchpad.net/bugs/557779 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 557779] Re: switch from... option results in lost x sessions
Jason Brooks, this bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? If so, could you please test for this with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If it remains an issue, could you please run the following command in the development release from a Terminal (Applications-Accessories-Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux replace-with-bug-number Also, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.13-rc4 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Project changed: indicator-applet = linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/557779 Title: switch from... option results in lost x sessions Status in “linux” package in Ubuntu: Incomplete Bug description: I'm running Lucid 64bit, installing updates every day. I have two users on my machine, and I switch between them using the indicator applet. Sometimes, the switch works without issue. Sometimes, the switched-to session does not appear, and the screen is black until I find the first session by trying control-shift-f7, control-shift-f8, etc. Other times, I switch, the second session does not appear, and I can't find the first session, either, and I have to restart gdm from control-shift-f1. Still other times, I can't reach any virtual terminal -- all are black -- and I have to break out of the situation by ssh'ing in from another machine on my network. I realize that this bug may well not be with the indicator applet, but the applet is where I'm triggering it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/557779/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 557779] Re: switch from... option results in lost x sessions
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/557779 Title: switch from... option results in lost x sessions Status in “linux” package in Ubuntu: Incomplete Bug description: I'm running Lucid 64bit, installing updates every day. I have two users on my machine, and I switch between them using the indicator applet. Sometimes, the switch works without issue. Sometimes, the switched-to session does not appear, and the screen is black until I find the first session by trying control-shift-f7, control-shift-f8, etc. Other times, I switch, the second session does not appear, and I can't find the first session, either, and I have to restart gdm from control-shift-f1. Still other times, I can't reach any virtual terminal -- all are black -- and I have to break out of the situation by ssh'ing in from another machine on my network. I realize that this bug may well not be with the indicator applet, but the applet is where I'm triggering it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/557779/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1254454] Re: 168c:0034 [Clevo P15xEMx] Bluetooth and wireless always on.
I've attached the result of my bisect. Hopefully it is correct. Following this I've updated my '/etc/default/grub' to include the below after searching using the first bad commit and it has fixed the problem. # To fix Wifi and Bluetooth GRUB_CMDLINE_LINUX_DEFAULT=acpi_osi=\!Windows 2012\ I found lots of users of various laptops with the same problem so I'm not sure if this counts as a bug or not. Thaks ** Attachment added: bisect.log https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1254454/+attachment/3930455/+files/bisect.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1254454 Title: 168c:0034 [Clevo P15xEMx] Bluetooth and wireless always on. Status in “linux” package in Ubuntu: Incomplete Bug description: On my Clevo P150EM the bluetooth and wireless are always on and the combinations Fn + F12 and Fn + F11 to turn them on and off do not work. This was functional on Ubuntu 13.10 using the 3.6.11-030611 and was broken in 3.7.0-030700rc1 both mainstream. I have tested for myself. I am going to attempt the splice if that is what is needed. The details are much the same as: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1131976/ ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.19 [modified: boot/vmlinuz-3.11.0-12-generic] ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: danieldean 1988 F pulseaudio Date: Sun Nov 24 14:44:47 2013 HibernationDevice: RESUME=UUID=7e1088b9-dde4-4166-ae95-0b9b94024207 InstallationDate: Installed on 2013-11-24 (0 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: CLEVO P15xEMx MarkForUpload: True ProcFB: 0 inteldrmfb 1 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=be2bed6b-74f0-4175-85e3-9827c732af05 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/19/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Not Applicable dmi.board.name: P15xEMx dmi.board.vendor: CLEVO dmi.board.version: Not Applicable dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: CLEVO dmi.chassis.version: Not Applicable dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd10/19/2012:svnCLEVO:pnP15xEMx:pvrNotApplicable:rvnCLEVO:rnP15xEMx:rvrNotApplicable:cvnCLEVO:ct10:cvrNotApplicable: dmi.product.name: P15xEMx dmi.product.version: Not Applicable dmi.sys.vendor: CLEVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1254454/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 930447] Re: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux
adding to the list: Intel(R) Celeron(R) M processor 1400MHz 0695 0812 A7E9F9BF Intel(R) Celeron(R) M processor 1400Mhz 06D6 0812 AFE9F9BF Intel(R) Celeron(R) M processor 1500MHz 0695 0812 A7E9F9BF Intel(R) Pentium(R) M processor 1300MHz 0695 0816 0180 A7E9F9BF Intel(R) Pentium(R) M processor 1400MHz 0695 0816 0180 A7E9F9BF Intel(R) Pentium(R) M processor 1500MHz 0695 0816 0180 A7E9F9BF Intel(R) Pentium(R) M processor 1600MHz 0695 0816 0180 A7E9F9BF Intel(R) Pentium(R) M processor 1600MHz 06D6 0816 0180 AFE9FBBF Intel(R) Pentium(R) M processor 1700MHz 06D6 0816 0180 AFE9F9BF Intel(R) Pentium(R) M processor 1800MHz 06D6 0816 0180 AFE9F9BF Intel(R) Pentium(R) M processor 2000MHz 06D6 0816 0180 AFE9F9BF Intel(R) Pentium(R) M processor 2100Mhz 06D6 0816 0180 AFE9F9BF ubuntu team - are, are you watching bugticket ? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/930447 Title: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux Status in “linux” package in Ubuntu: Confirmed Status in “syslinux” package in Ubuntu: Invalid Status in Baltix GNU/Linux: Triaged Bug description: Ubuntu 12.04 doesn't start from Desktop CD or USB with syslinux boot loader on Pentium M 1.6Ghz or faster Pentium M CPU - displays error message about missing PAE feature in CPU, but *the same* *Ubuntu 12.04* Desktop CD/LiveUSB starts fine on *the same CPU* (and same PAE kernel) if GRUB boot loader is used, for example when WUBI or LiveUSB with GRUB boot loader, like Multisystem (http://liveusb.info/dotclear/index.php?pages/install ) is used! The error message is: This kernel requires the following features not present on the CPU: pae. Unable to boot - please use a kernel appropriate for you CPU. THIS IS AN IMPORTANT REGRESSION! People are able to install and successfully use Ubuntu 12.04 on such pretty new hardware, like IBM Thinkpad T42 laptop with Pentium M 1700Mhz processor, but the bug in syslinux (or something related) forbids Ubuntu 12.04 installation. This bug is reproducible on lots of computers, there are several log files and /proc/cpuinfo file attached to this bugreport, AFAIK it's enough to reopen this bug. --- ApportVersion: 1.23-0ubuntu4 Architecture: i386 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied MachineType: IBM 2373PPU dmi.bios.date: 06/18/2007 dmi.bios.vendor: IBM dmi.bios.version: 1RETDRWW (3.23 ) dmi.board.name: 2373PPU dmi.board.vendor: IBM dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: IBM dmi.chassis.version: Not Available dmi.modalias: dmi:bvnIBM:bvr1RETDRWW(3.23):bd06/18/2007:svnIBM:pn2373PPU:pvrThinkPadT42:rvnIBM:rn2373PPU:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: dmi.product.name: 2373PPU dmi.product.version: ThinkPad T42 dmi.sys.vendor: IBM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/930447/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 734996] Re: [Dell Vostro 3400] Cannot access the text console.
I followed the guide and I found out the offending commit is between 2.6.35-32.68 and 2.6.36-0.1. I tried git://kernel.ubuntu.com /ubuntu-archive/ubuntu-maverick.git and git://kernel.ubuntu.com/ubuntu- archive/ubuntu-natty.git, but none of them contains both tags for me to bisect. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/734996 Title: [Dell Vostro 3400] Cannot access the text console. Status in “linux” package in Ubuntu: Incomplete Bug description: During a booting process, there should a kubuntu logo with 5 blinking dots since I am using Kubuntu. But it shows a black screen instead after loading the kernel and before Xorg started. Disabling modeset can get back the boot splash but lost accelerated 3D. After Xorg loaded, it shows a normal composited desktop with full hardware acceleration. But pressing Ctrl+Alt+F1 will hide the mouse cursor and cause the screen to freeze. Pressing Ctrl+Alt+7 can switch back to Xorg. It is also true for live DVD or a fully updated(as of today) system. WORKAROUND: I get back the text console by doing the following: 1) Blacklist nouveau 2) Rename /lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko to something else. 3) sudo update-initramfs -k all -u 4) sudo update-grub2 5) Reboot. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-6-generic 2.6.38-6.34 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.38-6.34-generic 2.6.38-rc7 Uname: Linux 2.6.38-6-generic x86_64 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pkduck 1513 F pulseaudio /dev/snd/pcmC0D0c: pkduck 1513 F...m pulseaudio /dev/snd/pcmC0D0p: pkduck 1513 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfb40 irq 48' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,10280440,00100105' Controls : 14 Simple ctrls : 9 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xfa08 irq 16' Mixer name : 'Nvidia GPU 0b HDMI/DP' Components : 'HDA:10de000b,10de0101,00100100' Controls : 16 Simple ctrls : 4 Date: Tue Mar 15 01:55:25 2011 HibernationDevice: RESUME=UUID=9ae7919b-4723-47c8-ad54-618575be1235 InstallationMedia: Kubuntu 11.04 Natty Narwhal - Alpha amd64 (20110303) MachineType: Dell Inc. Vostro 3400 ProcEnviron: LANGUAGE= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-6-generic root=UUID=ac177ace-fa7e-48ae-b159-9294925b4e89 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-6-generic N/A linux-backports-modules-2.6.38-6-generic N/A linux-firmware1.48 SourcePackage: linux StagingDrivers: brcm80211 Title: [STAGING] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/21/2010:svnDellInc.:pnVostro3400:pvrNotSpecified:rvnDellInc.:rn0RXV7H:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Vostro 3400 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.12.7-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: pkduck 1419 F pulseaudio /dev/snd/controlC0: pkduck 1419 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2013-12-15 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131215) MachineType: Dell Inc. Vostro 3400 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-7-generic root=UUID=0260376b-5122-4d52-be39-576de2d88f1b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 RelatedPackageVersions: linux-restricted-modules-3.12.0-7-generic N/A linux-backports-modules-3.12.0-7-generic N/A linux-firmware1.117 Tags: trusty Uname: Linux 3.12.0-7-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date:
[Kernel-packages] [Bug 930447] Re: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux
Roland, 1. Thanks for keeping this issue alive :-) 2. We have evidence that these two CPUs also have PAE capability but no PAE flag: Celeron M 1200 Mhz 0001 0695 0812 a7e9f9bf Celeron M 1300 MHz 0001 0695 0812 a7e9f9bf Best regards Nio -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/930447 Title: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux Status in “linux” package in Ubuntu: Confirmed Status in “syslinux” package in Ubuntu: Invalid Status in Baltix GNU/Linux: Triaged Bug description: Ubuntu 12.04 doesn't start from Desktop CD or USB with syslinux boot loader on Pentium M 1.6Ghz or faster Pentium M CPU - displays error message about missing PAE feature in CPU, but *the same* *Ubuntu 12.04* Desktop CD/LiveUSB starts fine on *the same CPU* (and same PAE kernel) if GRUB boot loader is used, for example when WUBI or LiveUSB with GRUB boot loader, like Multisystem (http://liveusb.info/dotclear/index.php?pages/install ) is used! The error message is: This kernel requires the following features not present on the CPU: pae. Unable to boot - please use a kernel appropriate for you CPU. THIS IS AN IMPORTANT REGRESSION! People are able to install and successfully use Ubuntu 12.04 on such pretty new hardware, like IBM Thinkpad T42 laptop with Pentium M 1700Mhz processor, but the bug in syslinux (or something related) forbids Ubuntu 12.04 installation. This bug is reproducible on lots of computers, there are several log files and /proc/cpuinfo file attached to this bugreport, AFAIK it's enough to reopen this bug. --- ApportVersion: 1.23-0ubuntu4 Architecture: i386 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied MachineType: IBM 2373PPU dmi.bios.date: 06/18/2007 dmi.bios.vendor: IBM dmi.bios.version: 1RETDRWW (3.23 ) dmi.board.name: 2373PPU dmi.board.vendor: IBM dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: IBM dmi.chassis.version: Not Available dmi.modalias: dmi:bvnIBM:bvr1RETDRWW(3.23):bd06/18/2007:svnIBM:pn2373PPU:pvrThinkPadT42:rvnIBM:rn2373PPU:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: dmi.product.name: 2373PPU dmi.product.version: ThinkPad T42 dmi.sys.vendor: IBM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/930447/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1254454] Re: 168c:0034 [Clevo P15xEMx] Bluetooth and wireless always on.
Daniel Dean, thank you for commit bisecting. The issue you are reporting is an upstream one. Could you please report this problem through the appropriate channel by following the instructions _verbatim_ at https://wiki.ubuntu.com/Bugs/Upstream/kernel#KernelTeam.2BAC8-KernelTeamBugPolicies.Overview_on_Reporting_Bugs_Upstream ? Please provide a direct URL to your post once you have made it so that it may be tracked. Thank you for your understanding. ** Description changed: On my Clevo P150EM the bluetooth and wireless are always on and the combinations Fn + F12 and Fn + F11 to turn them on and off do not work. This was functional on Ubuntu 13.10 using the 3.6.11-030611 and was broken in 3.7.0-030700rc1 both mainstream. I have tested for myself. I am going to attempt the splice if that is what is needed. - The details are much the same as: - https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1131976/ + A commit bisect notes the regression commit is: + a57f7f9175b8ccbc9df83ac13860488913115de4 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.19 [modified: boot/vmlinuz-3.11.0-12-generic] ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: danieldean 1988 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: danieldean 1988 F pulseaudio Date: Sun Nov 24 14:44:47 2013 HibernationDevice: RESUME=UUID=7e1088b9-dde4-4166-ae95-0b9b94024207 InstallationDate: Installed on 2013-11-24 (0 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: CLEVO P15xEMx MarkForUpload: True ProcFB: - 0 inteldrmfb - 1 nouveaufb + 0 inteldrmfb + 1 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=be2bed6b-74f0-4175-85e3-9827c732af05 ro quiet splash vt.handoff=7 RelatedPackageVersions: - linux-restricted-modules-3.11.0-12-generic N/A - linux-backports-modules-3.11.0-12-generic N/A - linux-firmware 1.116 + linux-restricted-modules-3.11.0-12-generic N/A + linux-backports-modules-3.11.0-12-generic N/A + linux-firmware 1.116 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/19/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Not Applicable dmi.board.name: P15xEMx dmi.board.vendor: CLEVO dmi.board.version: Not Applicable dmi.chassis.asset.tag: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: CLEVO dmi.chassis.version: Not Applicable dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd10/19/2012:svnCLEVO:pnP15xEMx:pvrNotApplicable:rvnCLEVO:rnP15xEMx:rvrNotApplicable:cvnCLEVO:ct10:cvrNotApplicable: dmi.product.name: P15xEMx dmi.product.version: Not Applicable dmi.sys.vendor: CLEVO ** Changed in: linux (Ubuntu) Status: Incomplete = Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1254454 Title: 168c:0034 [Clevo P15xEMx] Bluetooth and wireless always on. Status in “linux” package in Ubuntu: Triaged Bug description: On my Clevo P150EM the bluetooth and wireless are always on and the combinations Fn + F12 and Fn + F11 to turn them on and off do not work. This was functional on Ubuntu 13.10 using the 3.6.11-030611 and was broken in 3.7.0-030700rc1 both mainstream. I have tested for myself. I am going to attempt the splice if that is what is needed. A commit bisect notes the regression commit is: a57f7f9175b8ccbc9df83ac13860488913115de4 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-12-generic 3.11.0-12.19 [modified: boot/vmlinuz-3.11.0-12-generic] ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: danieldean 1988 F pulseaudio Date: Sun Nov 24 14:44:47 2013 HibernationDevice: RESUME=UUID=7e1088b9-dde4-4166-ae95-0b9b94024207 InstallationDate: Installed on 2013-11-24 (0 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: CLEVO P15xEMx MarkForUpload: True ProcFB: 0 inteldrmfb 1 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=be2bed6b-74f0-4175-85e3-9827c732af05 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: No
[Kernel-packages] [Bug 734996] Re: [Dell Vostro 3400] Cannot access the text console.
PKduck, thank you would want to switch to the mainline kernel as noted in https://wiki.ubuntu.com/Kernel/KernelBisection#Why_did_the_folders_debian_and_debian.master_disappear.3F . -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/734996 Title: [Dell Vostro 3400] Cannot access the text console. Status in “linux” package in Ubuntu: Incomplete Bug description: During a booting process, there should a kubuntu logo with 5 blinking dots since I am using Kubuntu. But it shows a black screen instead after loading the kernel and before Xorg started. Disabling modeset can get back the boot splash but lost accelerated 3D. After Xorg loaded, it shows a normal composited desktop with full hardware acceleration. But pressing Ctrl+Alt+F1 will hide the mouse cursor and cause the screen to freeze. Pressing Ctrl+Alt+7 can switch back to Xorg. It is also true for live DVD or a fully updated(as of today) system. WORKAROUND: I get back the text console by doing the following: 1) Blacklist nouveau 2) Rename /lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko to something else. 3) sudo update-initramfs -k all -u 4) sudo update-grub2 5) Reboot. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-6-generic 2.6.38-6.34 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.38-6.34-generic 2.6.38-rc7 Uname: Linux 2.6.38-6-generic x86_64 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pkduck 1513 F pulseaudio /dev/snd/pcmC0D0c: pkduck 1513 F...m pulseaudio /dev/snd/pcmC0D0p: pkduck 1513 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfb40 irq 48' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,10280440,00100105' Controls : 14 Simple ctrls : 9 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xfa08 irq 16' Mixer name : 'Nvidia GPU 0b HDMI/DP' Components : 'HDA:10de000b,10de0101,00100100' Controls : 16 Simple ctrls : 4 Date: Tue Mar 15 01:55:25 2011 HibernationDevice: RESUME=UUID=9ae7919b-4723-47c8-ad54-618575be1235 InstallationMedia: Kubuntu 11.04 Natty Narwhal - Alpha amd64 (20110303) MachineType: Dell Inc. Vostro 3400 ProcEnviron: LANGUAGE= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-6-generic root=UUID=ac177ace-fa7e-48ae-b159-9294925b4e89 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-6-generic N/A linux-backports-modules-2.6.38-6-generic N/A linux-firmware1.48 SourcePackage: linux StagingDrivers: brcm80211 Title: [STAGING] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/21/2010:svnDellInc.:pnVostro3400:pvrNotSpecified:rvnDellInc.:rn0RXV7H:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Vostro 3400 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.12.7-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: pkduck 1419 F pulseaudio /dev/snd/controlC0: pkduck 1419 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2013-12-15 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131215) MachineType: Dell Inc. Vostro 3400 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-7-generic root=UUID=0260376b-5122-4d52-be39-576de2d88f1b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 RelatedPackageVersions: linux-restricted-modules-3.12.0-7-generic N/A linux-backports-modules-3.12.0-7-generic N/A linux-firmware1.117 Tags: trusty Uname: Linux 3.12.0-7-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor:
[Kernel-packages] [Bug 1261491] [NEW] Ubuntu server 13.10 install USB shutdown
You have been subscribed to a public bug: Here's the basics: I create a USB installer of 13.10 Server 64-bit. boot a Zotac Zbox nano (AMD E2-1800 APU processor) with 8Gigs of RAM The boot options screen loads normally. I elect to install the server manually. Linux boots. The installer prompts for my language. At about this same time (its all pretty fast up to here, so I can't say its exactly the same moment), something happens with USB. The system doesn't shut down, but all power to all USB devices shuts down. unplugging and re-plugging in devices makes no difference. The keyboard has no power, so I cannot proceed with the install. I actually noticed the USB is turned off because the mouse is normally lit up but suddenly is no longer. To do anything, I need to power cycle. I tried checking for defects in the install media, and it runs pretty normally, but again, USB power shuts down, so when the check is complete with no errors, I cannot hit enter to continue. As a result, I do not believe that the installer is crashing: I think there is something stopping only the USB drivers. Fedora 19 installs normally on this machine. Things I intend to try: (I'll update as I try them) 13.10 server 32-bit. 13.10 desktop 64 and 32-bit 12.04 server This machine has no PS/2 ports, so I cannot try alternate keyboard types. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- Ubuntu server 13.10 install USB shutdown https://bugs.launchpad.net/bugs/1261491 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261491] Re: Ubuntu server 13.10 install USB shutdown
The may be a duplicate of bug 1244176 ** Changed in: linux (Ubuntu) Importance: Undecided = High ** Tags added: kernel-da-key saucy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261491 Title: Ubuntu server 13.10 install USB shutdown Status in “linux” package in Ubuntu: Incomplete Bug description: Here's the basics: I create a USB installer of 13.10 Server 64-bit. boot a Zotac Zbox nano (AMD E2-1800 APU processor) with 8Gigs of RAM The boot options screen loads normally. I elect to install the server manually. Linux boots. The installer prompts for my language. At about this same time (its all pretty fast up to here, so I can't say its exactly the same moment), something happens with USB. The system doesn't shut down, but all power to all USB devices shuts down. unplugging and re-plugging in devices makes no difference. The keyboard has no power, so I cannot proceed with the install. I actually noticed the USB is turned off because the mouse is normally lit up but suddenly is no longer. To do anything, I need to power cycle. I tried checking for defects in the install media, and it runs pretty normally, but again, USB power shuts down, so when the check is complete with no errors, I cannot hit enter to continue. As a result, I do not believe that the installer is crashing: I think there is something stopping only the USB drivers. Fedora 19 installs normally on this machine. Things I intend to try: (I'll update as I try them) 13.10 server 32-bit. 13.10 desktop 64 and 32-bit 12.04 server This machine has no PS/2 ports, so I cannot try alternate keyboard types. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261491/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261491] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1261491 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261491 Title: Ubuntu server 13.10 install USB shutdown Status in “linux” package in Ubuntu: Incomplete Bug description: Here's the basics: I create a USB installer of 13.10 Server 64-bit. boot a Zotac Zbox nano (AMD E2-1800 APU processor) with 8Gigs of RAM The boot options screen loads normally. I elect to install the server manually. Linux boots. The installer prompts for my language. At about this same time (its all pretty fast up to here, so I can't say its exactly the same moment), something happens with USB. The system doesn't shut down, but all power to all USB devices shuts down. unplugging and re-plugging in devices makes no difference. The keyboard has no power, so I cannot proceed with the install. I actually noticed the USB is turned off because the mouse is normally lit up but suddenly is no longer. To do anything, I need to power cycle. I tried checking for defects in the install media, and it runs pretty normally, but again, USB power shuts down, so when the check is complete with no errors, I cannot hit enter to continue. As a result, I do not believe that the installer is crashing: I think there is something stopping only the USB drivers. Fedora 19 installs normally on this machine. Things I intend to try: (I'll update as I try them) 13.10 server 32-bit. 13.10 desktop 64 and 32-bit 12.04 server This machine has no PS/2 ports, so I cannot try alternate keyboard types. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261491/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 734996] Re: [Dell Vostro 3400] Cannot access the text console.
It is getting more and more confusing. Mainline 2.6.35 and 2.6.36 both have this bug. It looks like if nouveau is loaded too fast, the console won't be accessible. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/734996 Title: [Dell Vostro 3400] Cannot access the text console. Status in “linux” package in Ubuntu: Incomplete Bug description: During a booting process, there should a kubuntu logo with 5 blinking dots since I am using Kubuntu. But it shows a black screen instead after loading the kernel and before Xorg started. Disabling modeset can get back the boot splash but lost accelerated 3D. After Xorg loaded, it shows a normal composited desktop with full hardware acceleration. But pressing Ctrl+Alt+F1 will hide the mouse cursor and cause the screen to freeze. Pressing Ctrl+Alt+7 can switch back to Xorg. It is also true for live DVD or a fully updated(as of today) system. WORKAROUND: I get back the text console by doing the following: 1) Blacklist nouveau 2) Rename /lib/modules/2.6.38-8-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko to something else. 3) sudo update-initramfs -k all -u 4) sudo update-grub2 5) Reboot. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-6-generic 2.6.38-6.34 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.38-6.34-generic 2.6.38-rc7 Uname: Linux 2.6.38-6-generic x86_64 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pkduck 1513 F pulseaudio /dev/snd/pcmC0D0c: pkduck 1513 F...m pulseaudio /dev/snd/pcmC0D0p: pkduck 1513 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfb40 irq 48' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,10280440,00100105' Controls : 14 Simple ctrls : 9 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xfa08 irq 16' Mixer name : 'Nvidia GPU 0b HDMI/DP' Components : 'HDA:10de000b,10de0101,00100100' Controls : 16 Simple ctrls : 4 Date: Tue Mar 15 01:55:25 2011 HibernationDevice: RESUME=UUID=9ae7919b-4723-47c8-ad54-618575be1235 InstallationMedia: Kubuntu 11.04 Natty Narwhal - Alpha amd64 (20110303) MachineType: Dell Inc. Vostro 3400 ProcEnviron: LANGUAGE= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-6-generic root=UUID=ac177ace-fa7e-48ae-b159-9294925b4e89 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-6-generic N/A linux-backports-modules-2.6.38-6-generic N/A linux-firmware1.48 SourcePackage: linux StagingDrivers: brcm80211 Title: [STAGING] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA04:bd05/21/2010:svnDellInc.:pnVostro3400:pvrNotSpecified:rvnDellInc.:rn0RXV7H:rvrA00:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Vostro 3400 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.12.7-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: pkduck 1419 F pulseaudio /dev/snd/controlC0: pkduck 1419 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2013-12-15 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131215) MachineType: Dell Inc. Vostro 3400 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-7-generic root=UUID=0260376b-5122-4d52-be39-576de2d88f1b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 RelatedPackageVersions: linux-restricted-modules-3.12.0-7-generic N/A linux-backports-modules-3.12.0-7-generic N/A linux-firmware1.117 Tags: trusty Uname: Linux 3.12.0-7-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 05/21/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0RXV7H dmi.board.vendor: Dell Inc.
[Kernel-packages] [Bug 600728] Re: gave up waiting for root device (temporary, intermittent)
I'm afraid I can no longer test, since I no longer have the system on which the bug showed up. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/600728 Title: gave up waiting for root device (temporary, intermittent) Status in “linux” package in Ubuntu: Incomplete Bug description: My Lucid installation sometimes fails to boot, dropping me instead into a BusyBox shell. The error message looks like this: Gave up wiating for root device. Common problems: - Boot args (cat /proc/cmdline) - check rootdelay= (did the system wait long enough?) - check root= (did the system wait for the right device?) - missing modules (cat /proc/modules; ls /dev) ALERT! /dev/disk/by-uuid/01234567-89ab-cdef-0123-456789abcdef does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ My root= line contains the correct uuid. (I masked it in the error message above.) Adding a rootdelay= of a couple minutes seems to make it fail less often. This is not a viable solution, because a couple minutes is way to long to have to wait, because it doesn't always help, and because booting used to work just fine with no wait. If I wait a few minutes and type 'exit' at the (initramfs) prompt, the system boots. Sometimes I have to try this a few times before it works. This bug is distinct from bug 360378, because in my case, the system is able to boot if I wait long enough. (Note the comments in bug 360378 stating that rootdelay doesn't help there.) The problem is clearly not because my disk is taking too long to become ready. My root, /boot, and boot sector are all on the same disk. If the disk wasn't ready, the system would not have been able to load GRUB or reach the BusyBox shell. This seems to be a regression. My system booted consistently in early Intrepid kernels and in releases earlier than Intrepid. The problem first showed up late in the Intrepid release cycle, presumably after a kernel upgrade. I was using GRUB 1 when the problem first appeared. It still exists after upgrading to GRUB 2. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Audigy2'/'SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xec00, irq 17' Mixer name : 'SigmaTel STAC9721,23' Components : 'AC97a:83847609' Controls : 210 Simple ctrls : 46 DistroRelease: Ubuntu 10.04 Frequency: Once every few days. HibernationDevice: RESUME=UUID=cf1efe17-335f-4939-aff9-d91f8a4c8ed0 IwConfig: lono wireless extensions. eth0 no wireless extensions. vboxnet0 no wireless extensions. MachineType: System manufacturer P5K/EPU NonfreeKernelModules: nvidia Package: linux (not installed) ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=64d0462d-8c6e-4a80-9b4b-60a144cda037 ro quiet splash ProcEnviron: PATH=(custom, user) LANG=en_US.utf8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5 Regression: Yes RelatedPackageVersions: linux-firmware 1.34.1 Reproducible: No RfKill: Tags: lucid filesystem regression-update needs-upstream-testing Uname: Linux 2.6.32-23-generic i686 UserGroups: adm admin audio cdrom dialout dip floppy fuse kvm lpadmin plugdev sambashare uml-net video wireshark www-data WifiSyslog: dmi.bios.date: 06/19/2008 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0604 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P5K/EPU dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0604:bd06/19/2008:svnSystemmanufacturer:pnP5K/EPU:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5K/EPU:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: P5K/EPU dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/600728/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1253155] Re: Failure to validate module signature at boot time
** Changed in: linux (Ubuntu Saucy) Status: Fix Released = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1253155 Title: Failure to validate module signature at boot time Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Committed Status in “linux” source package in Trusty: Fix Released Bug description: When booting under secureboot and using a signed kernel, it's expected that all modules shipped alongside the kernel should validate and load successfully without tainting the kernel. Unfortunately it doesn't seem to always be the case. Looking through my kernel logs, I see: Nov 15 10:35:24 castiana kernel: [1.635132] video: module verification failed: signature and/or required key missing - tainting kernel or Nov 12 12:58:48 castiana kernel: [213981.753326] Request for unknown module key 'Magrathea: Glacier signing key: f440a253eb498df923d438caa09b3b5d99308405' err -11 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.12.0-2-generic 3.12.0-2.7 ProcVersionSignature: Ubuntu 3.12.0-2.7-generic 3.12.0 Uname: Linux 3.12.0-2-generic x86_64 ApportVersion: 2.12.7-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stgraber 2721 F pulseaudio /dev/snd/controlC0: stgraber 2721 F pulseaudio /dev/snd/pcmC0D0c: stgraber 2721 F...m pulseaudio /dev/snd/pcmC0D0p: stgraber 2721 F...m pulseaudio CurrentDesktop: Unity Date: Wed Nov 20 11:59:57 2013 InstallationDate: Installed on 2013-04-21 (213 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130420) MachineType: LENOVO 2306CT0 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.12.0-2-generic.efi.signed root=UUID=14de4e20-b139-488e-863f-ec710f776851 ro quiet splash acpi_osi=!Windows 2012 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.12.0-2-generic N/A linux-backports-modules-3.12.0-2-generic N/A linux-firmware1.117 SourcePackage: linux StagingDrivers: zram UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/27/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET96WW (2.56 ) dmi.board.asset.tag: Not Available dmi.board.name: 2306CT0 dmi.board.vendor: LENOVO dmi.board.version: NO DPK dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET96WW(2.56):bd08/27/2013:svnLENOVO:pn2306CT0:pvrThinkPadX230:rvnLENOVO:rn2306CT0:rvrNODPK:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2306CT0 dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1253155/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261491] Re: Ubuntu server 13.10 install USB shutdown
*** This bug is a duplicate of bug 1244176 *** https://bugs.launchpad.net/bugs/1244176 ** This bug has been marked a duplicate of bug 1244176 Server 13.10 Install Fails with USB Keyboard (Appears to Hang) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261491 Title: Ubuntu server 13.10 install USB shutdown Status in “linux” package in Ubuntu: Incomplete Bug description: Here's the basics: I create a USB installer of 13.10 Server 64-bit. boot a Zotac Zbox nano (AMD E2-1800 APU processor) with 8Gigs of RAM The boot options screen loads normally. I elect to install the server manually. Linux boots. The installer prompts for my language. At about this same time (its all pretty fast up to here, so I can't say its exactly the same moment), something happens with USB. The system doesn't shut down, but all power to all USB devices shuts down. unplugging and re-plugging in devices makes no difference. The keyboard has no power, so I cannot proceed with the install. I actually noticed the USB is turned off because the mouse is normally lit up but suddenly is no longer. To do anything, I need to power cycle. I tried checking for defects in the install media, and it runs pretty normally, but again, USB power shuts down, so when the check is complete with no errors, I cannot hit enter to continue. As a result, I do not believe that the installer is crashing: I think there is something stopping only the USB drivers. Fedora 19 installs normally on this machine. Things I intend to try: (I'll update as I try them) 13.10 server 32-bit. 13.10 desktop 64 and 32-bit 12.04 server This machine has no PS/2 ports, so I cannot try alternate keyboard types. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261491/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261524] [NEW] Same USB HDD gets different mounting behaviour depending on filesystem used?
Public bug reported: Running Saucy on my laptop. I have a 2TB USB3.0 external HDD that is factory formatted in NTFS. When I first plugged it in, it was mounted like so: drwx-- 1 bladernr bladernr 4096 Dec 16 12:47 Alexandria and I was able to start creating a python script inside the disk : -rw--- 1 bladernr bladernr 179 Dec 16 12:47 update-library However, it was absolutely impossible to make that script executable. I tried remounting the drive by setting umaks, dmask and fmask to 0777, and I also tried setting the exec option. But there was absolutely no way I could make that script executable. So I reformatted the disk in ext4. This time, the drive mounted with ownership being root:root. Thus, still unusable, but even moreso this time because after I plugged in my hard disk, I was unable to even read the disk, let alone try to copy data or create files on it. In order to make my USB disk actually usable, as my user, I had to take the additional step of using chown on a cli. A user shouldn't have to take extraordinary measures like this to make their external HDD usable. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic 3.11.0-15.23 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: bladernr 2560 F pulseaudio /dev/snd/controlC2: bladernr 2560 F pulseaudio /dev/snd/controlC0: bladernr 2560 F pulseaudio Date: Mon Dec 16 15:21:35 2013 HibernationDevice: RESUME=UUID=c2f4cbc3-a904-4dbf-acd4-0a28f482d683 InstallationDate: Installed on 2012-03-15 (641 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 (20120307) MachineType: Alienware M15x MarkForUpload: True ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=e7eedf5d-5aad-4230-b123-47162b1acea6 ro RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-06-22 (177 days ago) dmi.bios.date: 08/24/2010 dmi.bios.vendor: Alienware dmi.bios.version: A08 dmi.board.vendor: Alienware dmi.board.version: A08 dmi.chassis.type: 8 dmi.chassis.vendor: Alienware dmi.chassis.version: A08 dmi.modalias: dmi:bvnAlienware:bvrA08:bd08/24/2010:svnAlienware:pnM15x:pvrA08:rvnAlienware:rn:rvrA08:cvnAlienware:ct8:cvrA08: dmi.product.name: M15x dmi.product.version: A08 dmi.sys.vendor: Alienware ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug package-from-proposed saucy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261524 Title: Same USB HDD gets different mounting behaviour depending on filesystem used? Status in “linux” package in Ubuntu: Confirmed Bug description: Running Saucy on my laptop. I have a 2TB USB3.0 external HDD that is factory formatted in NTFS. When I first plugged it in, it was mounted like so: drwx-- 1 bladernr bladernr 4096 Dec 16 12:47 Alexandria and I was able to start creating a python script inside the disk : -rw--- 1 bladernr bladernr 179 Dec 16 12:47 update-library However, it was absolutely impossible to make that script executable. I tried remounting the drive by setting umaks, dmask and fmask to 0777, and I also tried setting the exec option. But there was absolutely no way I could make that script executable. So I reformatted the disk in ext4. This time, the drive mounted with ownership being root:root. Thus, still unusable, but even moreso this time because after I plugged in my hard disk, I was unable to even read the disk, let alone try to copy data or create files on it. In order to make my USB disk actually usable, as my user, I had to take the additional step of using chown on a cli. A user shouldn't have to take extraordinary measures like this to make their external HDD usable. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic 3.11.0-15.23 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: bladernr 2560 F pulseaudio /dev/snd/controlC2: bladernr 2560 F pulseaudio /dev/snd/controlC0: bladernr 2560 F pulseaudio Date: Mon Dec 16 15:21:35 2013 HibernationDevice: RESUME=UUID=c2f4cbc3-a904-4dbf-acd4-0a28f482d683 InstallationDate: Installed on 2012-03-15 (641 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64
[Kernel-packages] [Bug 1199059] Re: A2DP audio sink devices failed to work with bluetoothd : Unable to select SEP in system log.
I am running the 64 bit version of Ubuntu 13.10 and face the same problem with Unable to select SEP errors in syslog. The suggestion in comment #7 unfortunately did not solve the problem for me. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1199059 Title: A2DP audio sink devices failed to work with bluetoothd : Unable to select SEP in system log. Status in “bluez” package in Ubuntu: Confirmed Bug description: All my A2DP devices can't create a audio device properly... My 2 13.04 machines both have this issue(1 notebook, 2 bluetooth dongles) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: bluez 4.101-0ubuntu8b1 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 Date: Tue Jul 9 01:01:38 2013 InstallationDate: Installed on 2013-01-26 (162 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130126) InterestingModules: rfcomm bnep btusb bluetooth MachineType: System manufacturer System Product Name MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=9bce9679-da3a-44fd-84ec-b16339a84004 ro quiet splash vt.handoff=7 SourcePackage: bluez UpgradeStatus: Upgraded to raring on 2013-03-01 (128 days ago) dmi.bios.date: 08/18/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1101 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P7H55-M dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1101:bd08/18/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7H55-M:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer hciconfig: hci0:Type: BR/EDR Bus: USB BD Address: 00:15:83:54:59:9F ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:29508 acl:1270 sco:0 events:461 errors:0 TX bytes:5249 acl:165 sco:0 commands:95 errors:0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1199059/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261524] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1261524 Title: Same USB HDD gets different mounting behaviour depending on filesystem used? Status in “linux” package in Ubuntu: Confirmed Bug description: Running Saucy on my laptop. I have a 2TB USB3.0 external HDD that is factory formatted in NTFS. When I first plugged it in, it was mounted like so: drwx-- 1 bladernr bladernr 4096 Dec 16 12:47 Alexandria and I was able to start creating a python script inside the disk : -rw--- 1 bladernr bladernr 179 Dec 16 12:47 update-library However, it was absolutely impossible to make that script executable. I tried remounting the drive by setting umaks, dmask and fmask to 0777, and I also tried setting the exec option. But there was absolutely no way I could make that script executable. So I reformatted the disk in ext4. This time, the drive mounted with ownership being root:root. Thus, still unusable, but even moreso this time because after I plugged in my hard disk, I was unable to even read the disk, let alone try to copy data or create files on it. In order to make my USB disk actually usable, as my user, I had to take the additional step of using chown on a cli. A user shouldn't have to take extraordinary measures like this to make their external HDD usable. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic 3.11.0-15.23 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: bladernr 2560 F pulseaudio /dev/snd/controlC2: bladernr 2560 F pulseaudio /dev/snd/controlC0: bladernr 2560 F pulseaudio Date: Mon Dec 16 15:21:35 2013 HibernationDevice: RESUME=UUID=c2f4cbc3-a904-4dbf-acd4-0a28f482d683 InstallationDate: Installed on 2012-03-15 (641 days ago) InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha amd64 (20120307) MachineType: Alienware M15x MarkForUpload: True ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=e7eedf5d-5aad-4230-b123-47162b1acea6 ro RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-06-22 (177 days ago) dmi.bios.date: 08/24/2010 dmi.bios.vendor: Alienware dmi.bios.version: A08 dmi.board.vendor: Alienware dmi.board.version: A08 dmi.chassis.type: 8 dmi.chassis.vendor: Alienware dmi.chassis.version: A08 dmi.modalias: dmi:bvnAlienware:bvrA08:bd08/24/2010:svnAlienware:pnM15x:pvrA08:rvnAlienware:rn:rvrA08:cvnAlienware:ct8:cvrA08: dmi.product.name: M15x dmi.product.version: A08 dmi.sys.vendor: Alienware To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1261524/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1054732] Re: [LENOVO 4298R86] suspend/resume failure
@Steffen Rieke, do you have the same hardware as the original bug reporter? If not, it might be best to open a new bug report. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Changed in: linux (Ubuntu Saucy) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1054732 Title: [LENOVO 4298R86] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Raring: Expired Status in “linux” source package in Saucy: Incomplete Bug description: Getting that message every time I open lid, or, sometime, even during normal workflow. ProblemType: KernelOops DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-15-generic 3.5.0-15.22 ProcVersionSignature: Ubuntu 3.5.0-15.22-generic 3.5.4 Uname: Linux 3.5.0-15-generic i686 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.5.2-0ubuntu4 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: amarao 2066 F pulseaudio Date: Sat Sep 22 01:33:21 2012 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=d3e012f1-f3c1-4ffe-9908-1d77a770d06b InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release i386 (20120817.3) InterpreterPath: /usr/bin/python3.2mu MachineType: LENOVO 4298R86 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-15-generic root=UUID=da13c7f0-b499-4c33-a0ea-6e1b7170d913 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.5.0-15-generic N/A linux-backports-modules-3.5.0-15-generic N/A linux-firmware1.93 SourcePackage: linux Title: [LENOVO 4298R86] suspend/resume failure UpgradeStatus: Upgraded to quantal on 2012-09-16 (5 days ago) UserGroups: dmi.bios.date: 12/01/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET56WW (1.26 ) dmi.board.asset.tag: Not Available dmi.board.name: 4298R86 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET56WW(1.26):bd12/01/2011:svnLENOVO:pn4298R86:pvrThinkPadX220Tablet:rvnLENOVO:rn4298R86:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4298R86 dmi.product.version: ThinkPad X220 Tablet dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1054732/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 913601] Re: 'fn' key not functional on Apple wireless keyboard
Sometime between 12.04 and 13.10 the device ID was added to the kernel sources, so I no longer experience this bug. Since 11.10 has passed EOL, and I'm no longer using 12.04 through 13.04 (so not interested if it's fixed in those versions), I've marked this Invalid. ** Changed in: linux (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/913601 Title: 'fn' key not functional on Apple wireless keyboard Status in “linux” package in Ubuntu: Invalid Bug description: I have a brand-new wireless Apple wireless keyboard, connected using Bluetooth. Some of the f-keys on this keyboard apparently have additional functions: F1: decrease brightness F2: increase brightness F3: ? F4: ? F7: previous track F8: play/pause F9: next track F10: mute F11: decrease volume F12: increase volume In addition, https://help.ubuntu.com/community/AppleKeyboard indicates that Insert, Delete, PageUp, PageDown, Home and End should be available through using 'fn' with other keys. None of these appear to work. Pressing 'fn' with any other key is identical to pressing that key on its own. Using 'xev' confirms this. I also notice that the kernel module hid_apple is not loaded when my keyboard is connected. There seem to be other bug reports (e.g. bug #227501, bug #499013) which report new versions of Apple peripherals having new device IDs, which prevent Ubuntu from configuring them properly when they are connected. In some cases the fix seems to be a custom kernel (!) or kernel patch. I don't know if this is the issue here. Please let me know what additional information or testing I can provide to help fix this bug. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: linux-image-3.0.0-15-generic 3.0.0-15.25 ProcVersionSignature: Ubuntu 3.0.0-15.25-generic 3.0.13 Uname: Linux 3.0.0-15-generic x86_64 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 ApportVersion: 1.23-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: khaeru 1665 F pulseaudio /dev/snd/controlC0: khaeru 1665 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xff87c000 irq 47' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,102802da,00100100' Controls : 19 Simple ctrls : 13 Card1.Amixer.info: Card hw:1 'Webcam'/'Dynex Dynex 1.3MP Webcam at usb-:00:1d.0-1.1, high speed' Mixer name : 'USB Mixer' Components : 'USB19ff:0102' Controls : 2 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 3328 Mono: Capture 1428 [43%] [23.57dB] [on] Date: Sun Jan 8 20:22:37 2012 HibernationDevice: RESUME=UUID=5ed9d7ef-c002-4d0d-ab52-7ea5b8e30b8a InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release amd64 (20101007) MachineType: Dell Inc. OptiPlex 980 ProcEnviron: PATH=(custom, user) LANG=en_CA.UTF-8 SHELL=/bin/bash LC_PAPER=en_GB.UTF-8 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-15-generic root=UUID=c78e3709-82ba-4e14-b214-a74ef951c14a ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.0.0-15-generic N/A linux-backports-modules-3.0.0-15-generic N/A linux-firmware1.60 SourcePackage: linux StagingDrivers: mei UpgradeStatus: Upgraded to oneiric on 2011-10-13 (87 days ago) dmi.bios.date: 11/03/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 0C522T dmi.board.vendor: Dell Inc. dmi.board.version: A03 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA05:bd11/03/2010:svnDellInc.:pnOptiPlex980:pvr:rvnDellInc.:rn0C522T:rvrA03:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 980 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/913601/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp