[Kernel-packages] [Bug 1279699] [NEW] AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4
Public bug reported: Description: Ubuntu 13.10 Release: 13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro X10SL7-F motherboards with new HP NC375T in the PCIE x8 (in x4) port. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Attachment added: lspci-vnvn.log https://bugs.launchpad.net/bugs/1279699/+attachment/3979418/+files/lspci-vnvn.log ** Summary changed: - AER: Corrected error received: id=00e4 + AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu.
[Kernel-packages] [Bug 987569] Re: CVE-2012-2121
** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Raring) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/987569 Title: CVE-2012-2121 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: Invalid Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Fix Released Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: Invalid Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux” source package in Precise: Fix Released Status in “linux-armadaxp” source package in Precise: Fix Released Status in “linux-ec2” source package in Precise: Invalid Status in “linux-fsl-imx51” source package in Precise: Invalid Status in “linux-lts-backport-maverick” source package in Precise: Invalid Status in “linux-lts-backport-natty” source package in Precise: Invalid Status in “linux-lts-backport-oneiric” source package in Precise: Invalid Status in “linux-lts-quantal” source package in Precise: Invalid Status in “linux-lts-raring” source package in Precise: Invalid Status in “linux-lts-saucy” source package in Precise: Invalid Status in “linux-mvl-dove” source package in Precise: Invalid Status in “linux-ti-omap4” source package in Precise: Fix Released Status in “linux” source package in Quantal: Invalid Status in “linux-armadaxp” source package in Quantal: Fix Released Status in “linux-ec2” source package in Quantal: Invalid Status in “linux-fsl-imx51” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Quantal: Invalid Status in “linux-lts-backport-natty” source package in Quantal: Invalid Status in “linux-lts-backport-oneiric” source package in Quantal: Invalid Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux-lts-raring” source package in Quantal: Invalid Status in “linux-lts-saucy” source package in Quantal: Invalid Status in “linux-mvl-dove” source package in Quantal: Invalid Status in “linux-ti-omap4” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Raring: Invalid Status in “linux-lts-backport-natty” source package in Raring: Invalid Status in “linux-lts-backport-oneiric” source package in Raring: Invalid Status in “linux” source package in Saucy: Invalid Status in “linux-armadaxp” source package in Saucy: Invalid Status in “linux-ec2” source package in Saucy: Invalid Status in “linux-fsl-imx51” source package in Saucy: Invalid Status in “linux-lts-backport-maverick” source package in Saucy: Invalid Status in “linux-lts-backport-natty” source package in Saucy: Invalid Status in “linux-lts-backport-oneiric” source package in Saucy: Invalid Status in “linux-lts-quantal” source package in Saucy: Invalid Status in “linux-lts-raring” source package in Saucy: Invalid Status in “linux-lts-saucy” source package in Saucy: Invalid Status in “linux-mvl-dove” source package in Saucy: Invalid Status in “linux-ti-omap4” source package in Saucy: Invalid Status in “linux” source package in Trusty: Invalid Status in “linux-armadaxp” source package in Trusty: Invalid Status in “linux-ec2” source package in Trusty: Invalid Status in “linux-fsl-imx51” source package in
[Kernel-packages] [Bug 1279699] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1279699 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete ** Tags added: saucy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Incomplete Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279]
[Kernel-packages] [Bug 1273284] Re: [ASUS ZENBOOK Touch UX31A] Intermittent complete freeze
Partial upgrade really degrades the stability. Total freeze at least once or twice a day. Kern.log attached bug occurs around 10h43 (because keybord manipulations don't work during freeze). ** Attachment added: kern.log.tar.gz https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1273284/+attachment/3979458/+files/kern.log.tar.gz ** Changed in: linux (Ubuntu) Status: Confirmed = New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1273284 Title: [ASUS ZENBOOK Touch UX31A] Intermittent complete freeze Status in “linux” package in Ubuntu: New Bug description: It's been some months, I'm experiencing complete freeze with my Ubuntu PC : mouse, keyboard are not responding, the fan accelerates to the max. It seems to me that it occurs randomly. Not exactly though because it never freezes when the screen is locked ! ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-58-generic 3.2.0-58.88 ProcVersionSignature: Ubuntu 3.2.0-58.88-generic 3.2.53 Uname: Linux 3.2.0-58-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pro2408 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf7d18000 irq 46' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10431517,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Mon Jan 27 16:33:59 2014 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=b75418bb-ef61-4233-bf6d-da4ed6f698bd InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MachineType: ASUSTeK COMPUTER INC. UX31A MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-58-generic root=UUID=b58d6bf8-bc7b-4c42-8601-f74e95167153 ro quiet splash,pcie_aspm=force,rootfstype=ext4 RelatedPackageVersions: linux-restricted-modules-3.2.0-58-generic N/A linux-backports-modules-3.2.0-58-generic N/A linux-firmware1.79.9 SourcePackage: linux StagingDrivers: rts5139 mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX31A.216 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX31A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX31A.216:bd11/21/2012:svnASUSTeKCOMPUTERINC.:pnUX31A:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX31A:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX31A dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1273284/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1273284] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1273284 Title: [ASUS ZENBOOK Touch UX31A] Intermittent complete freeze Status in “linux” package in Ubuntu: Confirmed Bug description: It's been some months, I'm experiencing complete freeze with my Ubuntu PC : mouse, keyboard are not responding, the fan accelerates to the max. It seems to me that it occurs randomly. Not exactly though because it never freezes when the screen is locked ! ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-58-generic 3.2.0-58.88 ProcVersionSignature: Ubuntu 3.2.0-58.88-generic 3.2.53 Uname: Linux 3.2.0-58-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pro2408 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf7d18000 irq 46' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10431517,00100100 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 11 Date: Mon Jan 27 16:33:59 2014 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=b75418bb-ef61-4233-bf6d-da4ed6f698bd InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MachineType: ASUSTeK COMPUTER INC. UX31A MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-58-generic root=UUID=b58d6bf8-bc7b-4c42-8601-f74e95167153 ro quiet splash,pcie_aspm=force,rootfstype=ext4 RelatedPackageVersions: linux-restricted-modules-3.2.0-58-generic N/A linux-backports-modules-3.2.0-58-generic N/A linux-firmware1.79.9 SourcePackage: linux StagingDrivers: rts5139 mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX31A.216 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX31A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX31A.216:bd11/21/2012:svnASUSTeKCOMPUTERINC.:pnUX31A:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX31A:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX31A dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1273284/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1237296] Re: 168c:0036 [Acer Aspire E1-572] ath9k QCA9565/AR9565/QCWB335 Bluetooth works sporadic
Joshua, I was suggested by your #25, where you displayed your dmesg output - I'm not very experience in kernel debugging (yet), so it looked quite similar for me. Anyway. I have the same device (Atheros AR9565) in my laptop so I'm waiting for solution to finally make it working as BT device and not only WiFi. If I can help somehow with testing, let me know. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1237296 Title: 168c:0036 [Acer Aspire E1-572] ath9k QCA9565/AR9565/QCWB335 Bluetooth works sporadic Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Saucy: Triaged Status in “linux” source package in Trusty: Triaged Bug description: Hello, I got myself a brand new Acer Aspire E1-572-54204G50Mnkk, because of the shine new Haswell hardware I choose to install Ubuntu 13.10 Beta 2. This laptop uses a Atheros AR9565 802.11 b/g/n 1 × 1 WiFi + Bluetooth 4.0 combination adapter, Wireless is working fine. But Bluetooth doesn't, it seems to be successfully deteced but I can't see any other Bluetooth devices and they can't see me too. Yours sincerly Joshua --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-10-12 (0 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash Tags: saucy Uname: Linux 3.12.0-031200rc4-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: joshua 1348 F pulseaudio /dev/snd/controlC0: joshua 1348 F pulseaudio DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-10-12 (8 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Acer Aspire E1-572 MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=287c8de2-616f-42ec-998d-1ac09ffb2d8a ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-12-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 05/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.04 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.04:bd05/21/2013:svnAcer:pnAspireE1-572:pvrV2.04:rvnAcer:rnEA50_HW:rvrV2.04:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.04 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237296/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279699] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1279699/+attachment/3979513/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro X10SL7-F
[Kernel-packages] [Bug 1279699] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1279699/+attachment/3979518/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro X10SL7-F
[Kernel-packages] [Bug 1279699] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1279699/+attachment/3979510/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro X10SL7-F
[Kernel-packages] [Bug 1279699] Re: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4
apport information ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed ** Tags added: apport-collected ** Description changed: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) - These are new Supermicro X10SL7-F motherboards with new HP NC375T in the - PCIE x8 (in x4) port. + These are new Supermicro X10SL7-F motherboards with new HP NC375T in the PCIE x8 (in x4) port. + --- + AlsaDevices: + total 0 + crw-rw 1 root audio 116, 1 Feb 13 12:00 seq + crw-rw 1 root audio 116, 33 Feb 13 12:00 timer + AplayDevices: Error: [Errno 2] No such
[Kernel-packages] [Bug 1279699] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1279699/+attachment/3979515/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro X10SL7-F
[Kernel-packages] [Bug 1279699] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1279699/+attachment/3979511/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro X10SL7-F motherboards
[Kernel-packages] [Bug 1279699] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1279699/+attachment/3979514/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro
[Kernel-packages] [Bug 1257272] Re: 05ac:1297 [HP Mini 110-1140SS PC] iPhone 4 iOS 7.0.4 won't mount
*** This bug is a duplicate of bug 1207812 *** https://bugs.launchpad.net/bugs/1207812 ** This bug has been marked a duplicate of bug 1207812 iOS 7, Trust Prompt Looping -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1257272 Title: 05ac:1297 [HP Mini 110-1140SS PC] iPhone 4 iOS 7.0.4 won't mount Status in “libimobiledevice” package in Ubuntu: Confirmed Status in “linux” package in Ubuntu: Confirmed Bug description: iPhone 4 with iOS 7.0.4 and Ubuntu 12.04.3 LTS on my HP Mini 110-1140ss notebook no mount and no tethering. Sorry for my English. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-31-generic-pae 3.2.0-31.50 ProcVersionSignature: Ubuntu 3.2.0-31.50-generic-pae 3.2.28 Uname: Linux 3.2.0-31-generic-pae i686 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jonanhp1869 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfe938000 irq 43' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,103c308f,00100402' Controls : 17 Simple ctrls : 10 Date: Tue Dec 3 13:30:39 2013 HibernationDevice: RESUME=UUID=b7855f5b-3110-4c7c-837b-7eddfff349ea InstallationMedia: Pear Linux 6 Live CD - Release i386 MachineType: Hewlett-Packard HP Mini 110-1100 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic-pae root=UUID=68d606a9-d8c1-475e-aa74-4eeb254ce100 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-31-generic-pae N/A linux-backports-modules-3.2.0-31-generic-pae N/A linux-firmware1.79.7 SourcePackage: linux StagingDrivers: zram UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/12/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 308F0 Ver. F.19 dmi.board.name: 308F dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 02.10 dmi.chassis.asset.tag: CNU9454BSL dmi.chassis.type: 10 dmi.chassis.vendor: Inventec dmi.modalias: dmi:bvnHewlett-Packard:bvr308F0Ver.F.19:bd01/12/2010:svnHewlett-Packard:pnHPMini110-1100:pvr039311201B030:rvnHewlett-Packard:rn308F:rvrKBCVersion02.10:cvnInventec:ct10:cvr: dmi.product.name: HP Mini 110-1100 dmi.product.version: 039311201B030 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libimobiledevice/+bug/1257272/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279699] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1279699/+attachment/3979517/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:[ 0] Receiver Error (First) These are new Supermicro X10SL7-F
[Kernel-packages] [Bug 1279081] Re: linux-lowlatency freezes when rt73usb is loaded
I tried booting linux-generic with the boot parameter threadirqs, and it froze, just the same as linux-lowlatency. So, I recommend removing the config that makes threadirqs a default boot parameter for linux-lowlatency, until the bug has been fixed. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279081 Title: linux-lowlatency freezes when rt73usb is loaded Status in “linux” package in Ubuntu: Confirmed Bug description: While my usb wifi device is connected, the kernel will freeze while booting. I can boot into recovery mode, but freeze happens as soon as I enable networking. I can boot and login fine without the device attached. As soon as I plug it in, the system freezes. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-lowlatency 3.13.0.8.12 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic i686 ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zequence 2598 F pulseaudio /dev/snd/controlC2: zequence 2598 F pulseaudio /dev/snd/controlC0: zequence 2598 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: GNOME Date: Tue Feb 11 22:02:39 2014 HibernationDevice: RESUME=UUID=ede81b37-17df-4f30-a234-1f1fb7f003ad MachineType: Gigabyte Technology Co., Ltd. 965P-DS4 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic root=UUID=7e51aea4-9325-401e-b318-bbf42e368c45 ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2013-10-11 (123 days ago) dmi.bios.date: 06/25/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F12 dmi.board.name: 965P-DS4 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF12:bd06/25/2009:svnGigabyteTechnologyCo.,Ltd.:pn965P-DS4:pvr:rvnGigabyteTechnologyCo.,Ltd.:rn965P-DS4:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: 965P-DS4 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279081/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1273403] Re: [Dell XPS 13 9333] Touchpad not detected correctly
Jacob Hemstad, could you please test the latest upstream kernel available (not the daily folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-3.14-rc2 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1273403 Title: [Dell XPS 13 9333] Touchpad not detected correctly Status in “linux” package in Ubuntu: Incomplete Bug description: The touchpad on my new XPS 13 Developer edition is detected as DLL060A:00 06CB:2734 when I installed Ubuntu 13.10. The touchpad previously worked with the default the Ubuntu 12.04 install and further live boots of 12.04 show the touchpad still working. I have made multiple attempts to clean reinstall 13.1 have failed to fix the touchpad issues. The output of xinput list: ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ DLL060A:00 06CB:2734id=10 [slave pointer (2)] ⎜ ↳ SYNAPTICS Synaptics Large Touch Screen id=13 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Power Buttonid=8[slave keyboard (3)] ↳ Integrated_Webcam_HDid=9[slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=11 [slave keyboard (3)] ↳ Dell WMI hotkeysid=12 [slave keyboard (3)] ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: xorg 1:7.7+1ubuntu6 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Mon Jan 27 13:49:10 2014 DistUpgraded: Fresh install DistroCodename: saucy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] InstallationDate: Installed on 2014-01-27 (0 days ago) InstallationMedia: It MachineType: Dell Inc. XPS13 9333 MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=e664d0ed-6b07-4bd5-9760-53cbb943a911 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.10+13.10.20131011-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.46-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.2.1-1ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.2.1-1ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.14.5-1ubuntu2~saucy1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev
[Kernel-packages] [Bug 1273403] Re: [Dell XPS 13 9333] Touchpad not detected correctly
** Tags added: needs-upstream-testing -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1273403 Title: [Dell XPS 13 9333] Touchpad not detected correctly Status in “linux” package in Ubuntu: Incomplete Bug description: The touchpad on my new XPS 13 Developer edition is detected as DLL060A:00 06CB:2734 when I installed Ubuntu 13.10. The touchpad previously worked with the default the Ubuntu 12.04 install and further live boots of 12.04 show the touchpad still working. I have made multiple attempts to clean reinstall 13.1 have failed to fix the touchpad issues. The output of xinput list: ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ DLL060A:00 06CB:2734id=10 [slave pointer (2)] ⎜ ↳ SYNAPTICS Synaptics Large Touch Screen id=13 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Power Buttonid=8[slave keyboard (3)] ↳ Integrated_Webcam_HDid=9[slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=11 [slave keyboard (3)] ↳ Dell WMI hotkeysid=12 [slave keyboard (3)] ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: xorg 1:7.7+1ubuntu6 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Mon Jan 27 13:49:10 2014 DistUpgraded: Fresh install DistroCodename: saucy DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] InstallationDate: Installed on 2014-01-27 (0 days ago) InstallationMedia: It MachineType: Dell Inc. XPS13 9333 MarkForUpload: True ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=e664d0ed-6b07-4bd5-9760-53cbb943a911 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.10+13.10.20131011-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.46-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.2.1-1ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.2.1-1ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.14.5-1ubuntu2~saucy1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu3.1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.2.0-0ubuntu10 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.904-0ubuntu2.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.9-2ubuntu1 xserver.bootTime: Mon Jan 27 13:18:07 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4933 vendor CMN xserver.version: 2:1.14.5-1ubuntu2~saucy1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1273403/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1265544]
So what can we do to move forward? Any thoughts on the quirk based solution I posted earlier? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265544 Title: 8086:0a16 [UX302LG] black screen on boot 3.12.0-7 Status in The Linux Kernel: Confirmed Status in “linux” package in Ubuntu: Triaged Bug description: Same description/workaround as https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1263015 I tried both Enable CSM and non-CSM boot. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.12.0-7-generic 3.12.0-7.15 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 Uname: Linux 3.12.0-7-generic x86_64 ApportVersion: 2.12.7-0ubuntu3 Architecture: amd64 Date: Thu Jan 2 09:59:33 2014 HibernationDevice: RESUME=UUID=e6458b44-fdb9-4db5-8cac-40ee0bbf9cf6 InstallationDate: Installed on 2013-12-31 (1 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131231) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 03eb:8a03 Atmel Corp. Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. UX302LG ProcFB: 0 simple ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.12.0-7-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset RelatedPackageVersions: linux-restricted-modules-3.12.0-7-generic N/A linux-backports-modules-3.12.0-7-generic N/A linux-firmware1.117 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/30/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX302LG.207 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX302LG dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX302LG.207:bd10/30/2013:svnASUSTeKCOMPUTERINC.:pnUX302LG:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX302LG:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX302LG dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1265544/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1265544] Re: 8086:0a16 [UX302LG] black screen on boot 3.12.0-7
** Changed in: linux Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1265544 Title: 8086:0a16 [UX302LG] black screen on boot 3.12.0-7 Status in The Linux Kernel: Confirmed Status in “linux” package in Ubuntu: Triaged Bug description: Same description/workaround as https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1263015 I tried both Enable CSM and non-CSM boot. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.12.0-7-generic 3.12.0-7.15 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 Uname: Linux 3.12.0-7-generic x86_64 ApportVersion: 2.12.7-0ubuntu3 Architecture: amd64 Date: Thu Jan 2 09:59:33 2014 HibernationDevice: RESUME=UUID=e6458b44-fdb9-4db5-8cac-40ee0bbf9cf6 InstallationDate: Installed on 2013-12-31 (1 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20131231) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 03eb:8a03 Atmel Corp. Bus 001 Device 003: ID 1bcf:2987 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:07dc Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: ASUSTeK COMPUTER INC. UX302LG ProcFB: 0 simple ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.12.0-7-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro recovery nomodeset RelatedPackageVersions: linux-restricted-modules-3.12.0-7-generic N/A linux-backports-modules-3.12.0-7-generic N/A linux-firmware1.117 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/30/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: UX302LG.207 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: UX302LG dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrUX302LG.207:bd10/30/2013:svnASUSTeKCOMPUTERINC.:pnUX302LG:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnUX302LG:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: UX302LG dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1265544/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1237296] Re: 168c:0036 [Acer Aspire E1-572] ath9k QCA9565/AR9565/QCWB335 Bluetooth works sporadic
@everyone, the Loading patch file failed error is definitely caused by ath3k incompatibility with USB 3.0. The ath3k driver fails to work approximately 2/3 of the time if btusb is connected to a pin which uses the xhci driver. I compiled a dkms kernel package, with the very extensive help of AceLan Kao, which switches the usb pin of the bt device to ehci. Now ath3k and my bluetooth works like a charm 100% of the time. However this is just a workaround, I will report this issue upstream but it looks like the devs are not really interested in fixing this, because it already got reported before. @Christopher, could you cherry pick the device id patch for my bluetooth card and backport it to saucy and trust? It is upstream since 3.14-rc1 [0][1] and I don't want to be forced to use the Ubuntu mainline kernel all the time. [0] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/bluetooth/ath3k.c?id=35580d223b6b04d9a570e4fe377c46a102413fe8 [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/bluetooth/btusb.c?id=35580d223b6b04d9a570e4fe377c46a102413fe8 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1237296 Title: 168c:0036 [Acer Aspire E1-572] ath9k QCA9565/AR9565/QCWB335 Bluetooth works sporadic Status in “linux” package in Ubuntu: Triaged Status in “linux” source package in Saucy: Triaged Status in “linux” source package in Trusty: Triaged Bug description: Hello, I got myself a brand new Acer Aspire E1-572-54204G50Mnkk, because of the shine new Haswell hardware I choose to install Ubuntu 13.10 Beta 2. This laptop uses a Atheros AR9565 802.11 b/g/n 1 × 1 WiFi + Bluetooth 4.0 combination adapter, Wireless is working fine. But Bluetooth doesn't, it seems to be successfully deteced but I can't see any other Bluetooth devices and they can't see me too. Yours sincerly Joshua --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-10-12 (0 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash Tags: saucy Uname: Linux 3.12.0-031200rc4-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: joshua 1348 F pulseaudio /dev/snd/controlC0: joshua 1348 F pulseaudio DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-10-12 (8 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Beta amd64 (20130925.1) MachineType: Acer Aspire E1-572 MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=de_DE TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic.efi.signed root=UUID=287c8de2-616f-42ec-998d-1ac09ffb2d8a ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-12-generic N/A linux-backports-modules-3.11.0-12-generic N/A linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-12-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 05/21/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.04 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.04:bd05/21/2013:svnAcer:pnAspireE1-572:pvrV2.04:rvnAcer:rnEA50_HW:rvrV2.04:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.04 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1237296/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279081] Re: linux freezes with threadirqs parameter when rt73usb is loaded
** Summary changed: - linux-lowlatency freezes when rt73usb is loaded + linux freezes with threadirqs parameter when rt73usb is loaded -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279081 Title: linux freezes with threadirqs parameter when rt73usb is loaded Status in “linux” package in Ubuntu: Confirmed Bug description: While my usb wifi device is connected, the kernel will freeze while booting. I can boot into recovery mode, but freeze happens as soon as I enable networking. I can boot and login fine without the device attached. As soon as I plug it in, the system freezes. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-lowlatency 3.13.0.8.12 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic i686 ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zequence 2598 F pulseaudio /dev/snd/controlC2: zequence 2598 F pulseaudio /dev/snd/controlC0: zequence 2598 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: GNOME Date: Tue Feb 11 22:02:39 2014 HibernationDevice: RESUME=UUID=ede81b37-17df-4f30-a234-1f1fb7f003ad MachineType: Gigabyte Technology Co., Ltd. 965P-DS4 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic root=UUID=7e51aea4-9325-401e-b318-bbf42e368c45 ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2013-10-11 (123 days ago) dmi.bios.date: 06/25/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F12 dmi.board.name: 965P-DS4 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF12:bd06/25/2009:svnGigabyteTechnologyCo.,Ltd.:pn965P-DS4:pvr:rvnGigabyteTechnologyCo.,Ltd.:rn965P-DS4:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: 965P-DS4 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279081/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1256155] Re: [Trusty Feature] Include latest upstream NVMe driver for FultonDale support
** Changed in: linux (Ubuntu) Status: New = In Progress ** Changed in: linux (Ubuntu) Assignee: (unassigned) = Tim Gardner (timg-tpi) ** Also affects: linux (Ubuntu Trusty) Importance: Undecided Assignee: Tim Gardner (timg-tpi) Status: In Progress ** Information type changed from Private to Public -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1256155 Title: [Trusty Feature] Include latest upstream NVMe driver for FultonDale support Status in intel: New Status in “linux” package in Ubuntu: In Progress Status in “linux” source package in Trusty: In Progress Bug description: This capability takes advantage of the Optimized PCI Express* SSD Interface used by FultonDale PCIe SDD Products. PCI Express* (PCIe) SSDs are emerging in Enterprise as a great solution in the caching tier where IOPs/$ and latency are valued. The NVM Express specification, developed cooperatively by more than 80 companies from across the industry, was released on March 1, 2011 by the NVMHCI Work Group; now more commonly known as the NVMe Work Group. The NVM Express 1.0 specification that defines an optimized register interface, command set and feature set for PCI Express¨ (PCIe¨)-based Solid-State Drives (SSDs). The goal is to enable the broad adoption of SSDs using the PCIe interface. For more information visit www.nvmexpress.org. The latest version of NVMe driver provides: - Highest Efficiency Performance with a Memory Optimized Interface - Delivers differentiated NVM solutions that address data center performance, scaling, and power challenges. To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1256155/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 990368] Re: CVE-2012-2133
** Also affects: linux (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-fsl-imx51 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-mvl-dove (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ec2 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ti-omap4 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-maverick (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-natty (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-oneiric (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-armadaxp (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-quantal (Ubuntu Trusty) Importance: Medium Status: Invalid ** No longer affects: linux-armadaxp (Ubuntu Hardy) ** No longer affects: linux-armadaxp (Ubuntu Oneiric) ** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Hardy) ** No longer affects: linux-ec2 (Ubuntu Oneiric) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Hardy) ** No longer affects: linux-lts-saucy (Ubuntu Oneiric) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Hardy) ** No longer affects: linux-lts-quantal (Ubuntu Oneiric) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Hardy) ** No longer affects: linux-mvl-dove (Ubuntu Oneiric) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Hardy) ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Hardy) ** No longer affects: linux-fsl-imx51 (Ubuntu Oneiric) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Hardy) ** No longer affects: linux-ti-omap4 (Ubuntu Oneiric) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Hardy) ** No longer affects: linux-lts-raring (Ubuntu Oneiric) ** No longer affects: linux-lts-raring (Ubuntu Raring) ** Changed in: linux-lts-raring (Ubuntu Precise) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Saucy) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Saucy) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Lucid) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Lucid) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Trusty) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Trusty) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Quantal) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Quantal) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/990368 Title: CVE-2012-2133 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: New Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Fix Released Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: New Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Oneiric: Invalid Status in
[Kernel-packages] [Bug 1024497] Re: CVE-2012-3400
** Also affects: linux (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-fsl-imx51 (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-mvl-dove (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-ec2 (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-ti-omap4 (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-lts-backport-maverick (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-lts-backport-natty (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-lts-backport-oneiric (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-armadaxp (Ubuntu Trusty) Importance: Low Status: Invalid ** Also affects: linux-lts-quantal (Ubuntu Trusty) Importance: Low Status: Invalid ** No longer affects: linux-armadaxp (Ubuntu Hardy) ** No longer affects: linux-armadaxp (Ubuntu Oneiric) ** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Hardy) ** No longer affects: linux-ec2 (Ubuntu Oneiric) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Hardy) ** No longer affects: linux-lts-saucy (Ubuntu Oneiric) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Hardy) ** No longer affects: linux-lts-quantal (Ubuntu Oneiric) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Hardy) ** No longer affects: linux-mvl-dove (Ubuntu Oneiric) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Hardy) ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Hardy) ** No longer affects: linux-fsl-imx51 (Ubuntu Oneiric) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Hardy) ** No longer affects: linux-ti-omap4 (Ubuntu Oneiric) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Hardy) ** No longer affects: linux-lts-raring (Ubuntu Oneiric) ** No longer affects: linux-lts-raring (Ubuntu Raring) ** Changed in: linux-lts-raring (Ubuntu Precise) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Importance: Undecided = Low ** Changed in: linux-lts-raring (Ubuntu Saucy) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Saucy) Importance: Undecided = Low ** Changed in: linux-lts-raring (Ubuntu Lucid) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Lucid) Importance: Undecided = Low ** Changed in: linux-lts-raring (Ubuntu Trusty) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Trusty) Importance: Undecided = Low ** Changed in: linux-lts-raring (Ubuntu Quantal) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Quantal) Importance: Undecided = Low -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1024497 Title: CVE-2012-3400 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: New Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Fix Released Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: New Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Oneiric: Invalid Status in “linux-lts-backport-natty” source package in Oneiric: Invalid
[Kernel-packages] [Bug 963685] Re: Please consider backporting killable request_module() patchset
** Also affects: linux (Ubuntu Trusty) Importance: Medium Assignee: Tim Gardner (timg-tpi) Status: Fix Released ** Also affects: linux-fsl-imx51 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-mvl-dove (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ec2 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ti-omap4 (Ubuntu Trusty) Importance: Medium Status: Fix Released ** Also affects: linux-lts-backport-maverick (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-natty (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-oneiric (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-armadaxp (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-quantal (Ubuntu Trusty) Importance: Medium Status: Invalid ** No longer affects: linux-armadaxp (Ubuntu Hardy) ** No longer affects: linux-armadaxp (Ubuntu Oneiric) ** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Hardy) ** No longer affects: linux-ec2 (Ubuntu Oneiric) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Hardy) ** No longer affects: linux-lts-saucy (Ubuntu Oneiric) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Hardy) ** No longer affects: linux-lts-quantal (Ubuntu Oneiric) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Hardy) ** No longer affects: linux-mvl-dove (Ubuntu Oneiric) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Hardy) ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Hardy) ** No longer affects: linux-fsl-imx51 (Ubuntu Oneiric) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Hardy) ** No longer affects: linux-ti-omap4 (Ubuntu Oneiric) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Hardy) ** No longer affects: linux-lts-raring (Ubuntu Oneiric) ** No longer affects: linux-lts-raring (Ubuntu Raring) ** Changed in: linux-ti-omap4 (Ubuntu Trusty) Status: Fix Released = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Saucy) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Saucy) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Lucid) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Lucid) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Trusty) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Trusty) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Quantal) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Quantal) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/963685 Title: Please consider backporting killable request_module() patchset Status in “linux” package in Ubuntu: Fix Released Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: New Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Fix Released Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: New Status in “linux-mvl-dove” source package in
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
We're also experiencing the same issue when booting the trusty installer on a Dell PowerEdge R610 with a Dell SAS 6/iR controller (LSI SAS1068E), resulting in the inability to install/run this system. This is an extremely popular controller, prevalent in a signifcant portion of Dell systems (or systems in general) out there, so this is a pretty serious bug for Trusty. The kernel actually oopses, here's the relevant lines from dmesg: [ 80.845434] Fusion MPT SAS Host driver 3.04.20 [ 80.845640] mptbase: ioc0: Initiating bringup [ 80.987894] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x2) [ 80.987908] ipmi_si ipmi_si.0: IPMI kcs interface initialized [ 81.550894] ioc0: LSISAS1068E B3: Capabilities={Initiator} [ 111.853426] scsi0: error handler thread failed to spawn, error = -12 [ 111.853431] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem [ 111.853441] BUG: unable to handle kernel NULL pointer dereference at 0060 [ 111.861275] IP: [81710382] mutex_lock+0x12/0x2f [ 111.866676] PGD 421531067 PUD 4207f2067 PMD 0 [ 111.871137] Oops: 0002 [#1] SMP [ 111.874375] Modules linked in: mptsas(F+) mptscsih(F) mptbase(F) scsi_transport_sas(F) ipmi_) [ 111.899462] CPU: 0 PID: 9847 Comm: systemd-udevd Tainted: GF 3.13.0-8-generic #27u [ 111.908489] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 3.0.0 01/31/2011 [ 111.915955] task: 880420734800 ti: 880422356000 task.ti: 880422356000 [ 111.923496] RIP: 0010:[81710382] [81710382] mutex_lock+0x12/0x2f [ 111.931319] RSP: 0018:880422357b10 EFLAGS: 00010246 [ 111.936619] RAX: RBX: 0060 RCX: 0006 [ 111.943737] RDX: 0007 RSI: f0aef0ac RDI: 0060 [ 111.950856] RBP: 880422357b18 R08: 0086 R09: 037f [ 111.957974] R10: R11: 8804223578ae R12: 0060 [ 111.965091] R13: 880423e9f000 R14: 880423e9f098 R15: a01063a0 [ 111.972210] FS: 7fd5221af7c0() GS:88042fc0() knlGS: [ 111.980283] CS: 0010 DS: ES: CR0: 8005003b [ 111.986014] CR2: 0060 CR3: 00042144f000 CR4: 07f0 [ 111.993132] Stack: [ 111.995135] 880422357b40 814c842d 880423da6000 [ 112.002549] 880423e9f000 880422357b70 a00ee2a1 [ 112.009966] 880423da6000 880423e9f000 880423e9f098 [ 112.017384] Call Trace: [ 112.019830] [814c842d] scsi_remove_host+0x1d/0x120 [ 112.025565] [a00ee2a1] mptscsih_remove+0x31/0xc0 [mptscsih] [ 112.032082] [a0100259] mptsas_probe+0x419/0x5a0 [mptsas] [ 112.038337] [8139c775] local_pci_probe+0x45/0xa0 [ 112.043897] [8139da15] ? pci_match_device+0xc5/0xd0 [ 112.049718] [8139db39] pci_device_probe+0xd9/0x130 [ 112.055454] [814839b5] driver_probe_device+0x125/0x3b0 [ 112.061534] [81483d13] __driver_attach+0x93/0xa0 [ 112.067094] [81483c80] ? __device_attach+0x40/0x40 [ 112.072829] [81481923] bus_for_each_dev+0x63/0xa0 [ 112.078475] [8148336e] driver_attach+0x1e/0x20 [ 112.083861] [81482f50] bus_add_driver+0x180/0x250 [ 112.089508] [a0065000] ? 0xa0064fff [ 112.094634] [81484394] driver_register+0x64/0xf0 [ 112.100195] [a0065000] ? 0xa0064fff [ 112.105322] [8139c10c] __pci_register_driver+0x4c/0x50 [ 112.111404] [a006511e] mptsas_init+0x11e/0x1000 [mptsas] [ 112.117658] [8100214a] do_one_initcall+0xfa/0x1b0 [ 112.123308] [81056d23] ? set_memory_nx+0x43/0x50 [ 112.128871] [810df8dd] load_module+0x12dd/0x1b40 [ 112.134432] [810db360] ? store_uevent+0x40/0x40 [ 112.139908] [810e02b6] SyS_finit_module+0x86/0xb0 [ 112.145558] [8171a73f] tracesys+0xe1/0xe6 [ 112.150508] Code: 05 e1 99 ff e9 40 ff ff ff b8 01 00 00 00 e9 8c fe ff ff 66 0f 1f 44 00 00 [ 112.169922] RIP [81710382] mutex_lock+0x12/0x2f [ 112.175405] RSP 880422357b10 [ 112.178881] CR2: 0060 [ 112.182208] ---[ end trace 00e5da911f36281b ]--- -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694]
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
** Tags added: kernel-key -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1095751] Re: bcmwl fails to build with 3.8 kernels [error: 'struct cfg80211_ibss_params' has no member named 'channel']
** Changed in: bcmwl (Ubuntu) Assignee: Alberto Milone (albertomilone) = (unassigned) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1095751 Title: bcmwl fails to build with 3.8 kernels [error: 'struct cfg80211_ibss_params' has no member named 'channel'] Status in “bcmwl” package in Ubuntu: Fix Released Status in “broadcom-sta” package in Ubuntu: Confirmed Status in “bcmwl” source package in Precise: Fix Released Status in “broadcom-sta” source package in Precise: Confirmed Bug description: Upcoming 3.8 kernels have broken this DKMS package. P SRU request: [Impact] * As a result of this bug, bcmwl-kernel-source will fail to build the module against linux-generic-lts-raring in Ubuntu 12.04. [Test Case] * Enable the precise-proposed repository and install bcmwl-kernel- source (6.20.155.1+bdcom-0ubuntu0.0.2). * Install linux-generic-lts-raring * If the package installs without errors from DKMS with both the linux-generic and lts-raring kernels, then the patches work correctly. [Regression Potential] * The patches that I backported from 13.10 will preserve the current driver behaviour on linux-generic (3.2) and linux-generic-lts-quantal (3.5), thanks to the use of specific macros in the code which check the kernel version. As a result, no regressions of any kind can be expected on these kernels. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1095751/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279699] Re: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc2-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Incomplete Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus
[Kernel-packages] [Bug 1279282] [NEW] There are no LCD backlight brightness function and OSD with Fn hot keys under Ubuntu 13.10.
You have been subscribed to a public bug: Steps to reproduce : #1. Install Ubuntu 13.10 x64 #2. Change OS indication. $ sudo gedit /etc/default/grub Find GRUB_CMDLINE_LINUX_DEFAULT=quiet splash Change to GRUB_CMDLINE_LINUX_DEFAULT=quiet splash acpi_os_name=Linux acpi_osi= $ sudo update-grub (Reboot) #3.Press hot key Fn+F8 or Fn+F9. More information : Our BIOS engineer had already checked the ACPI ASL code and all the necessary event notifications are normally notified as expected while Fn hot key pressed. Butthis issue is still there. We think there is no Intel graphics driver in Ubuntu 13.10.That's why we need it. There is no problem for all our Shark Bay models with the same ASL event notification under Ubuntu 13.10. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: backlight bot-comment lcd saucy -- There are no LCD backlight brightness function and OSD with Fn hot keys under Ubuntu 13.10. https://bugs.launchpad.net/bugs/1279282 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279308] Re: [MacBook Air 6, 2] screen backlight brightness and keyboard light turn into fully-on after Grub boot with i915 driver
I looked into the screen brightness issue a little bit a while back. The reason that the brightness gets set to maximum at boot is that the firmware doesn't initialize some state memory with the brightness at boot, so when the brightness is read from the firmware it gets back a value which corresponds to the maximum brightness. When Linux boots the acpi_video driver does some tests of various functionality which includes reading the current brightness and writing it back, which has the effect of setting the screen brightness to maximum. What OS X seems to do is to write the screen brightness to an EFI variable, so either acpi_video would need to know to look for that variable or else acpi_video just shouldn't be used for brightness on Apple hardware. As a workaround you could pass acpi_backlight=vendor on the kernel command line to disable use of the ACPI backlight interface. Not sure about the keyboard backlight, but it could be something similar. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279308 Title: [MacBook Air 6,2] screen backlight brightness and keyboard light turn into fully-on after Grub boot with i915 driver Status in “linux” package in Ubuntu: Incomplete Bug description: Problem: Both the screen backlight brightness and keyboard light are turned on during the booting as tested on ubuntu 12.04.3, 12.04.4, and 13.10. Due to installation problem on 12.04, it's only tested with the live system. What's expected: the brightness state before booting is preserved. Some trials: the problem should be on i915 driver even in single user mode. Tried nomodeset kerenel arguement can avoid the problem, but X will fail to start. --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: john 1776 F pulseaudio /dev/snd/controlC1: john 1776 F pulseaudio DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2014-02-10 (1 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: Apple Inc. MacBookAir6,2 MarkForUpload: True NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=b52fef82-3749-4624-a352-bd750dcb7e65 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-15.25-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-15-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 11/12/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B07.1311121319 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-7DF21CB3ED6977E5 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,2 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-7DF21CB3ED6977E5 dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B07.1311121319:bd11/12/2013:svnAppleInc.:pnMacBookAir6,2:pvr1.0:rvnAppleInc.:rnMac-7DF21CB3ED6977E5:rvrMacBookAir6,2:cvnAppleInc.:ct10:cvrMac-7DF21CB3ED6977E5: dmi.product.name: MacBookAir6,2 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279308/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279840] [NEW] [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure
Public bug reported: I updated and everything went fine. It required a restart and when I logged back in I got this error. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.28 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alex 1898 F pulseaudio Date: Thu Feb 13 06:34:55 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=c4fe2035-95a5-4274-9d59-987f4b0230cf InstallationDate: Installed on 2014-02-11 (2 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140210) InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 002 Device 003: ID 064e:e263 Suyin Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP 2000 Notebook PC ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-8-generic.efi.signed root=UUID=0593c186-c19e-4f92-82f2-42910b127a41 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 02/21/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.26 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 1854 dmi.board.vendor: Hewlett-Packard dmi.board.version: 64.22 dmi.chassis.asset.tag: 5CG31815Q0 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.26:bd02/21/2013:svnHewlett-Packard:pnHP2000NotebookPC:pvr088A1230591620100:rvnHewlett-Packard:rn1854:rvr64.22:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP 2000 Notebook PC dmi.product.version: 088A1230591620100 dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-kerneloops resume suspend trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279840 Title: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure Status in “linux” package in Ubuntu: New Bug description: I updated and everything went fine. It required a restart and when I logged back in I got this error. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.28 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alex 1898 F pulseaudio Date: Thu Feb 13 06:34:55 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=c4fe2035-95a5-4274-9d59-987f4b0230cf InstallationDate: Installed on 2014-02-11 (2 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140210) InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 002 Device 003: ID 064e:e263 Suyin Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP 2000 Notebook PC ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-8-generic.efi.signed root=UUID=0593c186-c19e-4f92-82f2-42910b127a41 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions:
[Kernel-packages] [Bug 1279282] Re: There are no LCD backlight brightness function and OSD with Fn hot keys under Ubuntu 13.10.
** Tags added: saucy ** Package changed: ubuntu = linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279282 Title: There are no LCD backlight brightness function and OSD with Fn hot keys under Ubuntu 13.10. Status in “linux” package in Ubuntu: New Bug description: Steps to reproduce : #1. Install Ubuntu 13.10 x64 #2. Change OS indication. $ sudo gedit /etc/default/grub Find GRUB_CMDLINE_LINUX_DEFAULT=quiet splash Change to GRUB_CMDLINE_LINUX_DEFAULT=quiet splash acpi_os_name=Linux acpi_osi= $ sudo update-grub (Reboot) #3.Press hot key Fn+F8 or Fn+F9. More information : Our BIOS engineer had already checked the ACPI ASL code and all the necessary event notifications are normally notified as expected while Fn hot key pressed. Butthis issue is still there. We think there is no Intel graphics driver in Ubuntu 13.10.That's why we need it. There is no problem for all our Shark Bay models with the same ASL event notification under Ubuntu 13.10. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279282/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279840] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279840 Title: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: I updated and everything went fine. It required a restart and when I logged back in I got this error. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.28 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alex 1898 F pulseaudio Date: Thu Feb 13 06:34:55 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=c4fe2035-95a5-4274-9d59-987f4b0230cf InstallationDate: Installed on 2014-02-11 (2 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140210) InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 002 Device 003: ID 064e:e263 Suyin Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP 2000 Notebook PC ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-8-generic.efi.signed root=UUID=0593c186-c19e-4f92-82f2-42910b127a41 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 02/21/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.26 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 1854 dmi.board.vendor: Hewlett-Packard dmi.board.version: 64.22 dmi.chassis.asset.tag: 5CG31815Q0 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.26:bd02/21/2013:svnHewlett-Packard:pnHP2000NotebookPC:pvr088A1230591620100:rvnHewlett-Packard:rn1854:rvr64.22:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP 2000 Notebook PC dmi.product.version: 088A1230591620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279840/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279282] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1279282 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279282 Title: There are no LCD backlight brightness function and OSD with Fn hot keys under Ubuntu 13.10. Status in “linux” package in Ubuntu: Incomplete Bug description: Steps to reproduce : #1. Install Ubuntu 13.10 x64 #2. Change OS indication. $ sudo gedit /etc/default/grub Find GRUB_CMDLINE_LINUX_DEFAULT=quiet splash Change to GRUB_CMDLINE_LINUX_DEFAULT=quiet splash acpi_os_name=Linux acpi_osi= $ sudo update-grub (Reboot) #3.Press hot key Fn+F8 or Fn+F9. More information : Our BIOS engineer had already checked the ACPI ASL code and all the necessary event notifications are normally notified as expected while Fn hot key pressed. Butthis issue is still there. We think there is no Intel graphics driver in Ubuntu 13.10.That's why we need it. There is no problem for all our Shark Bay models with the same ASL event notification under Ubuntu 13.10. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279282/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
I started a kernel bisect between v3.12 final and v3.13-rc1. The kernel bisect will require testing of about 7-10 test kernels. I built the first test kernel, up to the following commit: 5cbb3d216e2041700231bcfc383ee5f8b7fc8b74 The test kernel can be downloaded from: http://kernel.ubuntu.com/~jsalisbury/lp1276705 Can you test that kernel and report back if it has the bug or not. I will build the next test kernel based on your test results. Thanks in advance -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 930447] Re: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux
** Changed in: syslinux (Ubuntu) Status: Invalid = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/930447 Title: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux Status in “linux” package in Ubuntu: Confirmed Status in “syslinux” package in Ubuntu: Confirmed Status in Baltix GNU/Linux: Triaged Bug description: Ubuntu 12.04 doesn't start from Desktop CD or USB with syslinux boot loader on Pentium M 1.6Ghz or faster Pentium M CPU - displays error message about missing PAE feature in CPU, but *the same* *Ubuntu 12.04* Desktop CD/LiveUSB starts fine on *the same CPU* (and same PAE kernel) if GRUB boot loader is used, for example when WUBI or LiveUSB with GRUB boot loader, like Multisystem (http://liveusb.info/dotclear/index.php?pages/install ) is used! The error message is: This kernel requires the following features not present on the CPU: pae. Unable to boot - please use a kernel appropriate for you CPU. THIS IS AN IMPORTANT REGRESSION! People are able to install and successfully use Ubuntu 12.04 on such pretty new hardware, like IBM Thinkpad T42 laptop with Pentium M 1700Mhz processor, but the bug in syslinux (or something related) forbids Ubuntu 12.04 installation. This bug is reproducible on lots of computers, there are several log files and /proc/cpuinfo file attached to this bugreport, AFAIK it's enough to reopen this bug. --- ApportVersion: 1.23-0ubuntu4 Architecture: i386 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied MachineType: IBM 2373PPU dmi.bios.date: 06/18/2007 dmi.bios.vendor: IBM dmi.bios.version: 1RETDRWW (3.23 ) dmi.board.name: 2373PPU dmi.board.vendor: IBM dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: IBM dmi.chassis.version: Not Available dmi.modalias: dmi:bvnIBM:bvr1RETDRWW(3.23):bd06/18/2007:svnIBM:pn2373PPU:pvrThinkPadT42:rvnIBM:rn2373PPU:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: dmi.product.name: 2373PPU dmi.product.version: ThinkPad T42 dmi.sys.vendor: IBM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/930447/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279699] Re: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4
Tested it with the latest v3.13 kernel (3.13.2-031302.201402061638) and the errors still exists there too.. ** Tags added: kernel-bug-exists-upstream ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279699 Title: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4 Status in “linux” package in Ubuntu: Confirmed Bug description: Description:Ubuntu 13.10 Release:13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10) On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following error: [ 11.749109] bonding: bond0: Setting MII monitoring interval to 100. [ 11.797258] bonding: bond1 is being created... [ 11.797320] bonding: bond1 is being created... [ 11.797322] bonding: bond1 is being created... [ 11.797653] bonding: bond1 already exists. [ 11.797658] bonding: bond1 already exists. [ 11.808146] bonding: bond1: Setting MII monitoring interval to 100. [ 11.824060] bonding: bond0: setting mode to 802.3ad (4). [ 11.824063] bonding: bond1: setting mode to 802.3ad (4). [ 11.825177] bonding: bond1: Setting LACP rate to fast (1). [ 11.825259] bonding: bond0: Setting LACP rate to fast (1). [ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready [ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 11.871240] bonding: bond0: Adding slave p2p1. [ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1 [ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link. [ 12.715620] bonding: bond1: Adding slave p4p3. [ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link. [ 13.072970] bonding: bond1: Adding slave p4p2. [ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link. [ 13.608934] bonding: bond0: Adding slave p3p1. [ 13.976911] netxen_nic: p4p2 NIC Link is up [ 14.008903] netxen_nic: p4p3 NIC Link is up [ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link. [ 14.450459] bonding: bond1: Adding slave p4p1. [ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link. [ 14.544866] bonding: bond1: Adding slave p4p4. [ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link. [ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready [ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1. [ 14.862650] igb :05:00.0: changing MTU from 1500 to 9000 [ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 14.938826] igb :06:00.0: changing MTU from 1500 to 9000 [ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex. [ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex. [ 15.940783] netxen_nic: p4p1 NIC Link is up [ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex. [ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex. [ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex. [ 41.932293] pcieport :00:1c.4: AER: Multiple Corrected error received: id=00e4 [ 41.932337] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 41.937340] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 41.942261] pcieport :00:1c.4:[ 0] Receiver Error (First) [ 538.342279] pcieport :00:1c.4: AER: Corrected error received: id=00e4 [ 538.342306] pcieport :00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID) [ 538.342763] pcieport :00:1c.4: device [8086:8c18] error status/mask=0001/2000 [ 538.343127] pcieport :00:1c.4:
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Tested this kernel. It is NOT working, it has the issue. Extract of console log: [...] Linux version 3.12.0-031200-generic (jsalisbury@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201402101715 SMP Thu Feb 13 14:58:01 UTC 2014 [...] [ 42.455969] scsi4: error handler thread failed to spawn, error = -12 [ 42.541170] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem [ 42.630361] BUG: unable to handle kernel NULL pointer dereference at 0060 [...] -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1254091] Re: intel_pstate no_turbo patch from upstream
** Tags removed: verification-needed-saucy ** Tags added: verification-done-saucy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1254091 Title: intel_pstate no_turbo patch from upstream Status in “linux” package in Ubuntu: In Progress Status in “linux” source package in Saucy: In Progress Bug description: If you're on ubuntu_saucy and enabled intel_pstate like you should via the kernel boot parameter intel_pstate=enabled, you will find that the no_turbo setting[1] sometimes does not work. This is fixed in 3.12[2] and it should be backported to Saucy as it is a critical feature for those who experience overheating with turbo on. [1]: echo 1 /sys/devices/system/cpu/intel_pstate/no_turbo [2]: http://comments.gmane.org/gmane.linux.power-management.general/39243 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1254091/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279041] Re: /proc/sys/net/ipv4/ip_local_reserved_ports not writable because of apparmor
(Note, despite the 'confirmed' status for lxc we can't truly fix it in lxc until it is fixed in the kernel) ** Changed in: lxc (Ubuntu) Importance: Undecided = Medium ** Changed in: lxc (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279041 Title: /proc/sys/net/ipv4/ip_local_reserved_ports not writable because of apparmor Status in “linux” package in Ubuntu: Confirmed Status in “lxc” package in Ubuntu: Confirmed Bug description: Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 arch: amd64 Kernel: 3.13.0-8-generic #27-Ubuntu x86_64 GNU/Linux LXC container lxc-create --version 1.0.0.beta4 file: /proc/sys/net/ipv4/ip_local_reserved_port Does not exist and is not writable in a started container. Apparmor seems to block creating this file? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279041/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 930447] Re: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux
** Tags added: trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/930447 Title: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux Status in “linux” package in Ubuntu: Confirmed Status in “syslinux” package in Ubuntu: Confirmed Status in Baltix GNU/Linux: Triaged Bug description: Ubuntu 12.04 doesn't start from Desktop CD or USB with syslinux boot loader on Pentium M 1.6Ghz or faster Pentium M CPU - displays error message about missing PAE feature in CPU, but *the same* *Ubuntu 12.04* Desktop CD/LiveUSB starts fine on *the same CPU* (and same PAE kernel) if GRUB boot loader is used, for example when WUBI or LiveUSB with GRUB boot loader, like Multisystem (http://liveusb.info/dotclear/index.php?pages/install ) is used! The error message is: This kernel requires the following features not present on the CPU: pae. Unable to boot - please use a kernel appropriate for you CPU. THIS IS AN IMPORTANT REGRESSION! People are able to install and successfully use Ubuntu 12.04 on such pretty new hardware, like IBM Thinkpad T42 laptop with Pentium M 1700Mhz processor, but the bug in syslinux (or something related) forbids Ubuntu 12.04 installation. This bug is reproducible on lots of computers, there are several log files and /proc/cpuinfo file attached to this bugreport, AFAIK it's enough to reopen this bug. --- ApportVersion: 1.23-0ubuntu4 Architecture: i386 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied MachineType: IBM 2373PPU dmi.bios.date: 06/18/2007 dmi.bios.vendor: IBM dmi.bios.version: 1RETDRWW (3.23 ) dmi.board.name: 2373PPU dmi.board.vendor: IBM dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: IBM dmi.chassis.version: Not Available dmi.modalias: dmi:bvnIBM:bvr1RETDRWW(3.23):bd06/18/2007:svnIBM:pn2373PPU:pvrThinkPadT42:rvnIBM:rn2373PPU:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: dmi.product.name: 2373PPU dmi.product.version: ThinkPad T42 dmi.sys.vendor: IBM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/930447/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1189093] Re: Suspend resume immidiatly
Thanks for reporting this bug. Can you still reproduce this with 13.10 or with (the in-development) 14.04? While this could be a userspace bug, it seems more likely to be a bug in the kernel. It might be worth trying to boot one of the older kernels and see whether it suspends properly. ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New = Incomplete ** Changed in: pm-utils (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1189093 Title: Suspend resume immediately Status in “linux” package in Ubuntu: Incomplete Status in “pm-utils” package in Ubuntu: Incomplete Bug description: I have a new install of Lubuntu 13.04. I never had a problem with previous releases of ubuntu. The only trouble is that when I try to suspend my netbook with hotkeys (Fn+F4) or with shutdown menu, my netbook resumes immediately from suspend. The netbook enter regularly in suspend-mode if I close monitor If I can help, I have an aspire one 110l. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pm-utils 1.4.1-9git1 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 Date: Sun Jun 9 09:21:50 2013 InstallationDate: Installed on 2013-06-09 (0 days ago) InstallationMedia: Lubuntu 13.04 Raring Ringtail - Release i386 (20130423.1) MarkForUpload: True PackageArchitecture: all ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=it_IT.UTF-8 SHELL=/bin/bash SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1189093/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 930447] Re: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux
hi there! reverted bug-status back to confirmed. There are other bug-statii like opinion, incomplete, fix released, fix commited Non of these reflect the situation, neither. The bug-report is valid since a lot of users have confirmed it's existance. May be one-hundred-papercuts is the right place if you feel a bug doesn't get enough attention foralongtime. Another valuable thought is that one cannot blame the ubuntu-people solely for not getting this right - Intel should include the regarded little Pentium-M-boxes in the package 'intel-microcode' - probabely they'll lend us an open ear with the forthcoming end of W$ XP. BUT they won't take any action w/o a valuable bug-report. @ roland aus koeln: Keep in mind: a bug report disappears from list once it's marked as invalid. But is also appears in trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/930447 Title: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux Status in “linux” package in Ubuntu: Confirmed Status in “syslinux” package in Ubuntu: Confirmed Status in Baltix GNU/Linux: Triaged Bug description: Ubuntu 12.04 doesn't start from Desktop CD or USB with syslinux boot loader on Pentium M 1.6Ghz or faster Pentium M CPU - displays error message about missing PAE feature in CPU, but *the same* *Ubuntu 12.04* Desktop CD/LiveUSB starts fine on *the same CPU* (and same PAE kernel) if GRUB boot loader is used, for example when WUBI or LiveUSB with GRUB boot loader, like Multisystem (http://liveusb.info/dotclear/index.php?pages/install ) is used! The error message is: This kernel requires the following features not present on the CPU: pae. Unable to boot - please use a kernel appropriate for you CPU. THIS IS AN IMPORTANT REGRESSION! People are able to install and successfully use Ubuntu 12.04 on such pretty new hardware, like IBM Thinkpad T42 laptop with Pentium M 1700Mhz processor, but the bug in syslinux (or something related) forbids Ubuntu 12.04 installation. This bug is reproducible on lots of computers, there are several log files and /proc/cpuinfo file attached to this bugreport, AFAIK it's enough to reopen this bug. --- ApportVersion: 1.23-0ubuntu4 Architecture: i386 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied MachineType: IBM 2373PPU dmi.bios.date: 06/18/2007 dmi.bios.vendor: IBM dmi.bios.version: 1RETDRWW (3.23 ) dmi.board.name: 2373PPU dmi.board.vendor: IBM dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: IBM dmi.chassis.version: Not Available dmi.modalias: dmi:bvnIBM:bvr1RETDRWW(3.23):bd06/18/2007:svnIBM:pn2373PPU:pvrThinkPadT42:rvnIBM:rn2373PPU:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: dmi.product.name: 2373PPU dmi.product.version: ThinkPad T42 dmi.sys.vendor: IBM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/930447/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1173629] Re: Laptop does not resume after suspend Sony VAIO VGN-NS328J
Thanks for reporting this bug. I've marked it as also affecting the kernel as that is the more likely place for the fault. Can you still reproduce this with newer releases? ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: New = Incomplete ** Changed in: pm-utils (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1173629 Title: Laptop does not resume after suspend Sony VAIO VGN-NS328J Status in “linux” package in Ubuntu: Incomplete Status in “pm-utils” package in Ubuntu: Incomplete Bug description: When I suspend the laptop, it suspends as normal and power light starts blinking as it should. But when I press any key to resume, the VAIO logo appears and the laptop shows me grub operating system selection screen as if I just turned on or restarted the laptop. Let me know if you require more info about this problem. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pm-utils 1.4.1-9git1 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 Date: Sat Apr 27 19:53:09 2013 InstallationDate: Installed on 2013-01-07 (110 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True PackageArchitecture: all ProcEnviron: LANGUAGE=en_IN:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_IN SHELL=/bin/bash SourcePackage: pm-utils UpgradeStatus: Upgraded to raring on 2013-04-27 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173629/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1189093] Re: Suspend resume immediately
** Summary changed: - Suspend resume immidiatly + Suspend resume immediately ** Description changed: - I have a new install Lubuntu 13.04 - I don't have ever problem with previous release of ubuntu + I have a new install of Lubuntu 13.04. + I never had a problem with previous releases of ubuntu. - The only trouble is that if i try suspend my netbook with hotkeys - (Fn+F4) or with shutdown menu, netbook resume immidiatly from suspend. + The only trouble is that when I try to suspend my netbook with hotkeys + (Fn+F4) or with shutdown menu, my netbook resumes immediately from + suspend. - The netbook enter regulary in suspend-mode if i close monitor + The netbook enter regularly in suspend-mode if I close monitor - If can help i have an aspire one 110l + If I can help, I have an aspire one 110l. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pm-utils 1.4.1-9git1 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 Date: Sun Jun 9 09:21:50 2013 InstallationDate: Installed on 2013-06-09 (0 days ago) InstallationMedia: Lubuntu 13.04 Raring Ringtail - Release i386 (20130423.1) MarkForUpload: True PackageArchitecture: all ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=it_IT.UTF-8 SHELL=/bin/bash SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1189093 Title: Suspend resume immediately Status in “linux” package in Ubuntu: Incomplete Status in “pm-utils” package in Ubuntu: Incomplete Bug description: I have a new install of Lubuntu 13.04. I never had a problem with previous releases of ubuntu. The only trouble is that when I try to suspend my netbook with hotkeys (Fn+F4) or with shutdown menu, my netbook resumes immediately from suspend. The netbook enter regularly in suspend-mode if I close monitor If I can help, I have an aspire one 110l. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pm-utils 1.4.1-9git1 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 Date: Sun Jun 9 09:21:50 2013 InstallationDate: Installed on 2013-06-09 (0 days ago) InstallationMedia: Lubuntu 13.04 Raring Ringtail - Release i386 (20130423.1) MarkForUpload: True PackageArchitecture: all ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=it_IT.UTF-8 SHELL=/bin/bash SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1189093/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
Thanks for testing and the update. I'm actually going to restart the bisect to just go through the ~drivers/scsi subsystem. That should speed up the process considerably. I'll build the next test kernel and post it shortly. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1189093] Re: Suspend resume immediately
Thank you for taking the time to report this bug and helping to make Ubuntu better. We are sorry that we do not always have the capacity to look at all reported bugs in a timely manner. There have been many changes in Ubuntu since that time you reported the bug and your problem may have been fixed with some of the updates. It would help us a lot if you could test it on a currently supported Ubuntu version. When you test it and it is still an issue, kindly upload the updated logs by running apport-collect bug # and any other logs that are relevant for this particular issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1189093 Title: Suspend resume immediately Status in “linux” package in Ubuntu: Incomplete Status in “pm-utils” package in Ubuntu: Incomplete Bug description: I have a new install of Lubuntu 13.04. I never had a problem with previous releases of ubuntu. The only trouble is that when I try to suspend my netbook with hotkeys (Fn+F4) or with shutdown menu, my netbook resumes immediately from suspend. The netbook enter regularly in suspend-mode if I close monitor If I can help, I have an aspire one 110l. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: pm-utils 1.4.1-9git1 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 Uname: Linux 3.8.0-19-generic i686 ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 Date: Sun Jun 9 09:21:50 2013 InstallationDate: Installed on 2013-06-09 (0 days ago) InstallationMedia: Lubuntu 13.04 Raring Ringtail - Release i386 (20130423.1) MarkForUpload: True PackageArchitecture: all ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=it_IT.UTF-8 SHELL=/bin/bash SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1189093/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279893] [NEW] package linux-firmware 1.79 failed to install/upgrade: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x31010000_40.dfu', que está también en el paquete bt-dw
Public bug reported: I have no wifi ProblemType: Package DistroRelease: Ubuntu 12.04 Package: linux-firmware 1.79 ProcVersionSignature: Ubuntu 3.2.0-58.88-generic 3.2.53 Uname: Linux 3.2.0-58-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.6 AptOrdering: linux-firmware: Install linux-firmware: Configure Architecture: amd64 Date: Thu Feb 13 13:52:41 2014 Dependencies: DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 DpkgTerminalLog: Preparando para reemplazar linux-firmware 1.79 (usando .../linux-firmware_1.79.9_all.deb) ... Desempaquetando el reemplazo de linux-firmware ... dpkg: error al procesar /var/cache/apt/archives/linux-firmware_1.79.9_all.deb (--unpack): intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 DuplicateSignature: package:linux-firmware:1.79:intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 ErrorMessage: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 MarkForUpload: True PackageArchitecture: all SourcePackage: linux-firmware Title: package linux-firmware 1.79 failed to install/upgrade: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: linux-firmware (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package precise -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1279893 Title: package linux-firmware 1.79 failed to install/upgrade: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 Status in “linux-firmware” package in Ubuntu: New Bug description: I have no wifi ProblemType: Package DistroRelease: Ubuntu 12.04 Package: linux-firmware 1.79 ProcVersionSignature: Ubuntu 3.2.0-58.88-generic 3.2.53 Uname: Linux 3.2.0-58-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.6 AptOrdering: linux-firmware: Install linux-firmware: Configure Architecture: amd64 Date: Thu Feb 13 13:52:41 2014 Dependencies: DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 DpkgTerminalLog: Preparando para reemplazar linux-firmware 1.79 (usando .../linux-firmware_1.79.9_all.deb) ... Desempaquetando el reemplazo de linux-firmware ... dpkg: error al procesar /var/cache/apt/archives/linux-firmware_1.79.9_all.deb (--unpack): intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 DuplicateSignature: package:linux-firmware:1.79:intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 ErrorMessage: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 MarkForUpload: True PackageArchitecture: all SourcePackage: linux-firmware Title: package linux-firmware 1.79 failed to install/upgrade: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1279893/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279893] Re: package linux-firmware 1.79 failed to install/upgrade: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x31010000_40.dfu', que está también en el paquete bt-dw17
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1279893 Title: package linux-firmware 1.79 failed to install/upgrade: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 Status in “linux-firmware” package in Ubuntu: New Bug description: I have no wifi ProblemType: Package DistroRelease: Ubuntu 12.04 Package: linux-firmware 1.79 ProcVersionSignature: Ubuntu 3.2.0-58.88-generic 3.2.53 Uname: Linux 3.2.0-58-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.6 AptOrdering: linux-firmware: Install linux-firmware: Configure Architecture: amd64 Date: Thu Feb 13 13:52:41 2014 Dependencies: DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 DpkgTerminalLog: Preparando para reemplazar linux-firmware 1.79 (usando .../linux-firmware_1.79.9_all.deb) ... Desempaquetando el reemplazo de linux-firmware ... dpkg: error al procesar /var/cache/apt/archives/linux-firmware_1.79.9_all.deb (--unpack): intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 DuplicateSignature: package:linux-firmware:1.79:intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 ErrorMessage: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 MarkForUpload: True PackageArchitecture: all SourcePackage: linux-firmware Title: package linux-firmware 1.79 failed to install/upgrade: intentando sobreescribir `/lib/firmware/ar3k/ramps_0x3101_40.dfu', que está también en el paquete bt-dw1705-firmware 0.1 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1279893/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279081] Re: linux freezes with threadirqs parameter when rt73usb is loaded
Can you try booting the lowlatency kernel with the nothreadirqs boot parameter? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279081 Title: linux freezes with threadirqs parameter when rt73usb is loaded Status in “linux” package in Ubuntu: Confirmed Bug description: While my usb wifi device is connected, the kernel will freeze while booting. I can boot into recovery mode, but freeze happens as soon as I enable networking. I can boot and login fine without the device attached. As soon as I plug it in, the system freezes. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-lowlatency 3.13.0.8.12 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic i686 ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zequence 2598 F pulseaudio /dev/snd/controlC2: zequence 2598 F pulseaudio /dev/snd/controlC0: zequence 2598 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: GNOME Date: Tue Feb 11 22:02:39 2014 HibernationDevice: RESUME=UUID=ede81b37-17df-4f30-a234-1f1fb7f003ad MachineType: Gigabyte Technology Co., Ltd. 965P-DS4 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic root=UUID=7e51aea4-9325-401e-b318-bbf42e368c45 ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2013-10-11 (123 days ago) dmi.bios.date: 06/25/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F12 dmi.board.name: 965P-DS4 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF12:bd06/25/2009:svnGigabyteTechnologyCo.,Ltd.:pn965P-DS4:pvr:rvnGigabyteTechnologyCo.,Ltd.:rn965P-DS4:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: 965P-DS4 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279081/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1275116] Re: lowlatency-flavour crashes and locks up alot
As an additional data point, can you see if this bug also happens if you boot the -generic kernel with the threadirqs boot parameter? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1275116 Title: lowlatency-flavour crashes and locks up alot Status in “linux” package in Ubuntu: Confirmed Bug description: The 3.11 flavour that where upgraded to 3.13 today crashed 10 times this morning. I have the crashdums, but I figured that it might have been solved in 3.13. Unfortunatly it seems like it is not. I will add crashdumps when I get crashes that do not just lockup the machine but currently I have only seem complete lockups with 3.13 So the essense is : 3.11-lowlatency crashed 10 time today most of the crashes reached the console so I could see the panic text. 3.13-lowlatency crash 1 time 10 minuttes after first boot. No VT swtich. During next reboot it also locked. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-6-lowlatency (not installed) ProcVersionSignature: Ubuntu 3.13.0-6.23-generic 3.13.0 Uname: Linux 3.13.0-6-generic i686 ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sgh2176 F pulseaudio CurrentDesktop: KDE Date: Fri Jan 31 23:38:10 2014 InstallationDate: Installed on 2013-12-24 (38 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Alpha i386 (20131224) MachineType: LENOVO 2356GCG ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-6-generic root=UUID=6376d4d7-bb9e-4488-bb5f-798e6c41f3fc ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-6-generic N/A linux-backports-modules-3.13.0-6-generic N/A linux-firmware1.123 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/02/2012 dmi.bios.vendor: LENOVO dmi.bios.version: G7ET31WW (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 2356GCG dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG7ET31WW(1.13):bd07/02/2012:svnLENOVO:pn2356GCG:pvrThinkPadT430s:rvnLENOVO:rn2356GCG:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2356GCG dmi.product.version: ThinkPad T430s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1275116/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 930447] Re: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux
May be one-hundred-papercuts is the right place if you feel a bug doesn't get enough attention foralongtime. that`s a pointer, thanks. Another valuable thought is that one cannot blame the ubuntu-people solely for not getting this right yes, for sure intel also is to blame, but when the ubuntu team decided to drop non-pae kernel ( http://ubuntu.5.x6.nabble.com/Dropping-i386 -non-PAE-as-a-supported-kernel-flavour-in-Precise-Pangolin-td366373.html ) they should better care for the consequences instead of ignoring the problems of hundreds of users. and , they cannot say that nobody complained - there had been complaints already at time of the announcement. i would have no problem when ubuntu was simply ubuntu desktop, but there is ubuntu server, there is ltsp, there is lubuntu and there is xubuntu, and these are all suitable or even meant for old hardware. hardware you cannot use with these ubuntu derivates anymore. and there are many more ubuntu based distros - get a clue at: http://distrowatch.com/search.php?basedon=Ubuntu so, deciding to drop non-pae ubuntu team also decided killing old hardware, as users are more likely to switch to new hardware than switching to a distro like debian. @ roland aus koeln: Keep in mind: a bug report disappears from list once it's marked as invalid. But is also appears in trusty i neither maintain this bug nor can i remember touching this bug`s status information, i´m not even sure if i can change a bug`s status at all. what i really no not understand is why adding my rather non-intrusive patch to the ubuntu kernel as a workaround to the drop-non- pae-decision is such a no-go and why kernel devs telling they would probably have a look and probably make a better version of it and then i never ever get any response again. to me this looks like they neither put attention on this issue nor do they appreciate/esteem work/fixes from the user community, as the work i put into this is for nothing and just a waste of time. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/930447 Title: Unable to start Ubuntu 12.04 live CD with syslinux loader on Pentium M x86 Laptop due to bug in PAE kernel, initramfs or syslinux Status in “linux” package in Ubuntu: Confirmed Status in “syslinux” package in Ubuntu: Confirmed Status in Baltix GNU/Linux: Triaged Bug description: Ubuntu 12.04 doesn't start from Desktop CD or USB with syslinux boot loader on Pentium M 1.6Ghz or faster Pentium M CPU - displays error message about missing PAE feature in CPU, but *the same* *Ubuntu 12.04* Desktop CD/LiveUSB starts fine on *the same CPU* (and same PAE kernel) if GRUB boot loader is used, for example when WUBI or LiveUSB with GRUB boot loader, like Multisystem (http://liveusb.info/dotclear/index.php?pages/install ) is used! The error message is: This kernel requires the following features not present on the CPU: pae. Unable to boot - please use a kernel appropriate for you CPU. THIS IS AN IMPORTANT REGRESSION! People are able to install and successfully use Ubuntu 12.04 on such pretty new hardware, like IBM Thinkpad T42 laptop with Pentium M 1700Mhz processor, but the bug in syslinux (or something related) forbids Ubuntu 12.04 installation. This bug is reproducible on lots of computers, there are several log files and /proc/cpuinfo file attached to this bugreport, AFAIK it's enough to reopen this bug. --- ApportVersion: 1.23-0ubuntu4 Architecture: i386 CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied MachineType: IBM 2373PPU dmi.bios.date: 06/18/2007 dmi.bios.vendor: IBM dmi.bios.version: 1RETDRWW (3.23 ) dmi.board.name: 2373PPU dmi.board.vendor: IBM dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: IBM dmi.chassis.version: Not Available dmi.modalias: dmi:bvnIBM:bvr1RETDRWW(3.23):bd06/18/2007:svnIBM:pn2373PPU:pvrThinkPadT42:rvnIBM:rn2373PPU:rvrNotAvailable:cvnIBM:ct10:cvrNotAvailable: dmi.product.name: 2373PPU dmi.product.version: ThinkPad T42 dmi.sys.vendor: IBM To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/930447/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
I built the next test kernel, up to the following commit: 53151bbb83f11b358ac94eddd81347c581dc51ea This kernel is from a new bisect, which will only bisect through the scsi directory. The test kernel can be downloaded from: http://kernel.ubuntu.com/~jsalisbury/lp1276705 Can you test that kernel and report back if it has the bug or not. I will build the next test kernel based on your test results. Thanks in advance -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1129192] Re: CVE-2013-0871
** Also affects: linux (Ubuntu Trusty) Importance: High Status: Fix Committed ** Also affects: linux-fsl-imx51 (Ubuntu Trusty) Importance: High Status: Invalid ** Also affects: linux-mvl-dove (Ubuntu Trusty) Importance: High Status: Invalid ** Also affects: linux-ec2 (Ubuntu Trusty) Importance: High Status: Invalid ** Also affects: linux-ti-omap4 (Ubuntu Trusty) Importance: High Status: Fix Released ** Also affects: linux-lts-backport-maverick (Ubuntu Trusty) Importance: High Status: Invalid ** Also affects: linux-lts-backport-natty (Ubuntu Trusty) Importance: Undecided Status: Invalid ** Also affects: linux-lts-backport-oneiric (Ubuntu Trusty) Importance: High Status: Invalid ** Also affects: linux-armadaxp (Ubuntu Trusty) Importance: High Status: Invalid ** Also affects: linux-lts-quantal (Ubuntu Trusty) Importance: High Status: Invalid ** No longer affects: linux-armadaxp (Ubuntu Hardy) ** No longer affects: linux-armadaxp (Ubuntu Oneiric) ** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Hardy) ** No longer affects: linux-ec2 (Ubuntu Oneiric) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Hardy) ** No longer affects: linux-lts-saucy (Ubuntu Oneiric) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Hardy) ** No longer affects: linux-lts-quantal (Ubuntu Oneiric) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Hardy) ** No longer affects: linux-mvl-dove (Ubuntu Oneiric) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Hardy) ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Hardy) ** No longer affects: linux-fsl-imx51 (Ubuntu Oneiric) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Hardy) ** No longer affects: linux-ti-omap4 (Ubuntu Oneiric) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Hardy) ** No longer affects: linux-lts-raring (Ubuntu Oneiric) ** No longer affects: linux-lts-raring (Ubuntu Raring) ** Changed in: linux-ti-omap4 (Ubuntu Trusty) Status: Fix Released = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Importance: Undecided = High ** Changed in: linux-lts-raring (Ubuntu Saucy) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Saucy) Importance: Undecided = High ** Changed in: linux-lts-raring (Ubuntu Lucid) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Lucid) Importance: Undecided = High ** Changed in: linux-lts-raring (Ubuntu Trusty) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Trusty) Importance: Undecided = High ** Changed in: linux-lts-raring (Ubuntu Quantal) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Quantal) Importance: Undecided = High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1129192 Title: CVE-2013-0871 Status in “linux” package in Ubuntu: Fix Committed Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: New Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: New Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in
[Kernel-packages] [Bug 1153813] Re: CVE-2013-0914
** Also affects: linux (Ubuntu Trusty) Importance: Medium Status: Fix Released ** Also affects: linux-fsl-imx51 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-mvl-dove (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ec2 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ti-omap4 (Ubuntu Trusty) Importance: Medium Status: Fix Released ** Also affects: linux-lts-backport-maverick (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-natty (Ubuntu Trusty) Importance: Undecided Status: Invalid ** Also affects: linux-lts-backport-oneiric (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-armadaxp (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-quantal (Ubuntu Trusty) Importance: Medium Status: Invalid ** No longer affects: linux-armadaxp (Ubuntu Hardy) ** No longer affects: linux-armadaxp (Ubuntu Oneiric) ** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Hardy) ** No longer affects: linux-ec2 (Ubuntu Oneiric) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Hardy) ** No longer affects: linux-lts-saucy (Ubuntu Oneiric) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Hardy) ** No longer affects: linux-lts-quantal (Ubuntu Oneiric) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Hardy) ** No longer affects: linux-mvl-dove (Ubuntu Oneiric) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Hardy) ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Hardy) ** No longer affects: linux-fsl-imx51 (Ubuntu Oneiric) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Hardy) ** No longer affects: linux-ti-omap4 (Ubuntu Oneiric) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Hardy) ** No longer affects: linux-lts-raring (Ubuntu Oneiric) ** No longer affects: linux-lts-raring (Ubuntu Raring) ** Changed in: linux-ti-omap4 (Ubuntu Trusty) Status: Fix Released = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Saucy) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Saucy) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Lucid) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Lucid) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Trusty) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Trusty) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Quantal) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Quantal) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1153813 Title: CVE-2013-0914 Status in “linux” package in Ubuntu: Fix Released Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: New Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: New Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in
[Kernel-packages] [Bug 1143815] Re: CVE-2013-1767
** Also affects: linux (Ubuntu Trusty) Importance: Medium Status: Fix Committed ** Also affects: linux-fsl-imx51 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-mvl-dove (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ec2 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ti-omap4 (Ubuntu Trusty) Importance: Medium Status: Fix Committed ** Also affects: linux-lts-backport-maverick (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-natty (Ubuntu Trusty) Importance: Undecided Status: Invalid ** Also affects: linux-lts-backport-oneiric (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-armadaxp (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-quantal (Ubuntu Trusty) Importance: Medium Status: Invalid ** No longer affects: linux-armadaxp (Ubuntu Hardy) ** No longer affects: linux-armadaxp (Ubuntu Oneiric) ** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Hardy) ** No longer affects: linux-ec2 (Ubuntu Oneiric) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Hardy) ** No longer affects: linux-lts-saucy (Ubuntu Oneiric) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Hardy) ** No longer affects: linux-lts-quantal (Ubuntu Oneiric) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Hardy) ** No longer affects: linux-mvl-dove (Ubuntu Oneiric) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Hardy) ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Hardy) ** No longer affects: linux-fsl-imx51 (Ubuntu Oneiric) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Hardy) ** No longer affects: linux-ti-omap4 (Ubuntu Oneiric) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Hardy) ** No longer affects: linux-lts-raring (Ubuntu Oneiric) ** No longer affects: linux-lts-raring (Ubuntu Raring) ** Changed in: linux-ti-omap4 (Ubuntu Trusty) Status: Fix Committed = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Saucy) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Saucy) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Lucid) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Lucid) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Trusty) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Trusty) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Quantal) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Quantal) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1143815 Title: CVE-2013-1767 Status in “linux” package in Ubuntu: Fix Committed Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: New Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: New Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid
[Kernel-packages] [Bug 1152788] Re: CVE-2013-1792
** Also affects: linux (Ubuntu Trusty) Importance: Medium Assignee: Luis Henriques (henrix) Status: Fix Committed ** Also affects: linux-fsl-imx51 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-mvl-dove (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ec2 (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-ti-omap4 (Ubuntu Trusty) Importance: Medium Status: Fix Released ** Also affects: linux-lts-backport-maverick (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-backport-natty (Ubuntu Trusty) Importance: Undecided Status: Invalid ** Also affects: linux-lts-backport-oneiric (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-armadaxp (Ubuntu Trusty) Importance: Medium Status: Invalid ** Also affects: linux-lts-quantal (Ubuntu Trusty) Importance: Medium Status: Invalid ** No longer affects: linux-armadaxp (Ubuntu Hardy) ** No longer affects: linux-armadaxp (Ubuntu Oneiric) ** No longer affects: linux-armadaxp (Ubuntu Raring) ** No longer affects: linux-ec2 (Ubuntu Hardy) ** No longer affects: linux-ec2 (Ubuntu Oneiric) ** No longer affects: linux-ec2 (Ubuntu Raring) ** No longer affects: linux-lts-saucy (Ubuntu Hardy) ** No longer affects: linux-lts-saucy (Ubuntu Oneiric) ** No longer affects: linux-lts-saucy (Ubuntu Raring) ** No longer affects: linux-lts-quantal (Ubuntu Hardy) ** No longer affects: linux-lts-quantal (Ubuntu Oneiric) ** No longer affects: linux-lts-quantal (Ubuntu Raring) ** No longer affects: linux-mvl-dove (Ubuntu Hardy) ** No longer affects: linux-mvl-dove (Ubuntu Oneiric) ** No longer affects: linux-mvl-dove (Ubuntu Raring) ** No longer affects: linux (Ubuntu Hardy) ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu Raring) ** No longer affects: linux-fsl-imx51 (Ubuntu Hardy) ** No longer affects: linux-fsl-imx51 (Ubuntu Oneiric) ** No longer affects: linux-fsl-imx51 (Ubuntu Raring) ** No longer affects: linux-ti-omap4 (Ubuntu Hardy) ** No longer affects: linux-ti-omap4 (Ubuntu Oneiric) ** No longer affects: linux-ti-omap4 (Ubuntu Raring) ** No longer affects: linux-lts-raring (Ubuntu Hardy) ** No longer affects: linux-lts-raring (Ubuntu Oneiric) ** No longer affects: linux-lts-raring (Ubuntu Raring) ** Changed in: linux-ti-omap4 (Ubuntu Trusty) Status: Fix Released = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Precise) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Saucy) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Saucy) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Lucid) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Lucid) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Trusty) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Trusty) Importance: Undecided = Medium ** Changed in: linux-lts-raring (Ubuntu Quantal) Status: New = Invalid ** Changed in: linux-lts-raring (Ubuntu Quantal) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1152788 Title: CVE-2013-1792 Status in “linux” package in Ubuntu: Fix Committed Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Invalid Status in “linux-lts-backport-natty” package in Ubuntu: Invalid Status in “linux-lts-backport-oneiric” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: New Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Released Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Released Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Invalid Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-backport-oneiric” source package in Lucid: Fix Released Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: New Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4”
[Kernel-packages] [Bug 1252422] Re: CVE-2013-4579
** Changed in: linux-armadaxp (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-lts-quantal (Ubuntu Precise) Status: New = Fix Committed ** Changed in: linux (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Saucy) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Quantal) Status: New = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1252422 Title: CVE-2013-4579 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Won't Fix Status in “linux-lts-backport-natty” package in Ubuntu: Won't Fix Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: Invalid Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Invalid Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Invalid Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Won't Fix Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: Invalid Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux” source package in Precise: Fix Committed Status in “linux-armadaxp” source package in Precise: Fix Committed Status in “linux-ec2” source package in Precise: Invalid Status in “linux-fsl-imx51” source package in Precise: Invalid Status in “linux-lts-backport-maverick” source package in Precise: Won't Fix Status in “linux-lts-backport-natty” source package in Precise: Won't Fix Status in “linux-lts-quantal” source package in Precise: Fix Committed Status in “linux-lts-raring” source package in Precise: Fix Committed Status in “linux-lts-saucy” source package in Precise: Fix Committed Status in “linux-mvl-dove” source package in Precise: Invalid Status in “linux-ti-omap4” source package in Precise: Fix Committed Status in “linux” source package in Quantal: Fix Committed Status in “linux-armadaxp” source package in Quantal: Fix Committed Status in “linux-ec2” source package in Quantal: Invalid Status in “linux-fsl-imx51” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Quantal: Won't Fix Status in “linux-lts-backport-natty” source package in Quantal: Won't Fix Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux-lts-raring” source package in Quantal: Invalid Status in “linux-lts-saucy” source package in Quantal: Invalid Status in “linux-mvl-dove” source package in Quantal: Invalid Status in “linux-ti-omap4” source package in Quantal: Fix Committed Status in “linux-lts-backport-maverick” source package in Raring: Won't Fix Status in “linux-lts-backport-natty” source package in Raring: Won't Fix Status in “linux” source package in Saucy: Fix Committed Status in “linux-armadaxp” source package in Saucy: Invalid Status in “linux-ec2” source package in Saucy: Invalid Status in “linux-fsl-imx51” source package in Saucy: Invalid Status in “linux-lts-backport-maverick” source package in Saucy: Won't Fix Status in “linux-lts-backport-natty” source package in Saucy: Won't Fix Status in “linux-lts-quantal” source package in Saucy: Invalid Status in “linux-lts-raring” source package in Saucy: Invalid Status in “linux-lts-saucy” source package in Saucy: Invalid Status in “linux-mvl-dove” source package in Saucy: Invalid Status in “linux-ti-omap4” source package in Saucy: Fix Committed Status in “linux” source package in Trusty: Invalid Status in “linux-armadaxp” source package in Trusty: Invalid Status in “linux-ec2” source package in Trusty: Invalid Status in “linux-fsl-imx51” source package in Trusty: Invalid Status in “linux-lts-backport-maverick” source package in Trusty: Won't Fix Status in “linux-lts-backport-natty” source package in Trusty: Won't Fix Status in “linux-lts-quantal” source package in Trusty: Invalid Status in “linux-lts-raring” source package in Trusty: Invalid Status in “linux-lts-saucy” source package in Trusty: Invalid Status in “linux-mvl-dove” source package in Trusty: Invalid Status in “linux-ti-omap4” source
[Kernel-packages] [Bug 1261566] Re: CVE-2013-6367
** Changed in: linux-armadaxp (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-lts-quantal (Ubuntu Precise) Status: New = Fix Committed ** Changed in: linux (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Saucy) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Quantal) Status: New = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1261566 Title: CVE-2013-6367 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Won't Fix Status in “linux-lts-backport-natty” package in Ubuntu: Won't Fix Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: Invalid Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Committed Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Committed Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Won't Fix Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: Invalid Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux” source package in Precise: Fix Committed Status in “linux-armadaxp” source package in Precise: Fix Committed Status in “linux-ec2” source package in Precise: Invalid Status in “linux-fsl-imx51” source package in Precise: Invalid Status in “linux-lts-backport-maverick” source package in Precise: Won't Fix Status in “linux-lts-backport-natty” source package in Precise: Won't Fix Status in “linux-lts-quantal” source package in Precise: Fix Committed Status in “linux-lts-raring” source package in Precise: New Status in “linux-lts-saucy” source package in Precise: Fix Committed Status in “linux-mvl-dove” source package in Precise: Invalid Status in “linux-ti-omap4” source package in Precise: Fix Committed Status in “linux” source package in Quantal: Fix Committed Status in “linux-armadaxp” source package in Quantal: Fix Committed Status in “linux-ec2” source package in Quantal: Invalid Status in “linux-fsl-imx51” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Quantal: Won't Fix Status in “linux-lts-backport-natty” source package in Quantal: Won't Fix Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux-lts-raring” source package in Quantal: Invalid Status in “linux-lts-saucy” source package in Quantal: Invalid Status in “linux-mvl-dove” source package in Quantal: Invalid Status in “linux-ti-omap4” source package in Quantal: Fix Committed Status in “linux-lts-backport-maverick” source package in Raring: Won't Fix Status in “linux-lts-backport-natty” source package in Raring: Won't Fix Status in “linux” source package in Saucy: Fix Committed Status in “linux-armadaxp” source package in Saucy: Invalid Status in “linux-ec2” source package in Saucy: Invalid Status in “linux-fsl-imx51” source package in Saucy: Invalid Status in “linux-lts-backport-maverick” source package in Saucy: Won't Fix Status in “linux-lts-backport-natty” source package in Saucy: Won't Fix Status in “linux-lts-quantal” source package in Saucy: Invalid Status in “linux-lts-raring” source package in Saucy: Invalid Status in “linux-lts-saucy” source package in Saucy: Invalid Status in “linux-mvl-dove” source package in Saucy: Invalid Status in “linux-ti-omap4” source package in Saucy: Fix Committed Status in “linux” source package in Trusty: Invalid Status in “linux-armadaxp” source package in Trusty: Invalid Status in “linux-ec2” source package in Trusty: Invalid Status in “linux-fsl-imx51” source package in Trusty: Invalid Status in “linux-lts-backport-maverick” source package in Trusty: Won't Fix Status in “linux-lts-backport-natty” source package in Trusty: Won't Fix Status in “linux-lts-quantal” source package in Trusty: Invalid Status in “linux-lts-raring” source package in Trusty: Invalid Status in “linux-lts-saucy” source package in Trusty: Invalid Status in “linux-mvl-dove” source package in Trusty: Invalid Status in “linux-ti-omap4” source
[Kernel-packages] [Bug 1261564] Re: CVE-2013-4587
** Changed in: linux-armadaxp (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-lts-quantal (Ubuntu Precise) Status: New = Fix Committed ** Changed in: linux (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Saucy) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Quantal) Status: New = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1261564 Title: CVE-2013-4587 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Won't Fix Status in “linux-lts-backport-natty” package in Ubuntu: Won't Fix Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: Invalid Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Committed Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Committed Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Won't Fix Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: Invalid Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux” source package in Precise: Fix Committed Status in “linux-armadaxp” source package in Precise: Fix Committed Status in “linux-ec2” source package in Precise: Invalid Status in “linux-fsl-imx51” source package in Precise: Invalid Status in “linux-lts-backport-maverick” source package in Precise: Won't Fix Status in “linux-lts-backport-natty” source package in Precise: Won't Fix Status in “linux-lts-quantal” source package in Precise: Fix Committed Status in “linux-lts-raring” source package in Precise: New Status in “linux-lts-saucy” source package in Precise: Fix Committed Status in “linux-mvl-dove” source package in Precise: Invalid Status in “linux-ti-omap4” source package in Precise: Fix Committed Status in “linux” source package in Quantal: Fix Committed Status in “linux-armadaxp” source package in Quantal: Fix Committed Status in “linux-ec2” source package in Quantal: Invalid Status in “linux-fsl-imx51” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Quantal: Won't Fix Status in “linux-lts-backport-natty” source package in Quantal: Won't Fix Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux-lts-raring” source package in Quantal: Invalid Status in “linux-lts-saucy” source package in Quantal: Invalid Status in “linux-mvl-dove” source package in Quantal: Invalid Status in “linux-ti-omap4” source package in Quantal: Fix Committed Status in “linux-lts-backport-maverick” source package in Raring: Won't Fix Status in “linux-lts-backport-natty” source package in Raring: Won't Fix Status in “linux” source package in Saucy: Fix Committed Status in “linux-armadaxp” source package in Saucy: Invalid Status in “linux-ec2” source package in Saucy: Invalid Status in “linux-fsl-imx51” source package in Saucy: Invalid Status in “linux-lts-backport-maverick” source package in Saucy: Won't Fix Status in “linux-lts-backport-natty” source package in Saucy: Won't Fix Status in “linux-lts-quantal” source package in Saucy: Invalid Status in “linux-lts-raring” source package in Saucy: Invalid Status in “linux-lts-saucy” source package in Saucy: Invalid Status in “linux-mvl-dove” source package in Saucy: Invalid Status in “linux-ti-omap4” source package in Saucy: Fix Committed Status in “linux” source package in Trusty: Invalid Status in “linux-armadaxp” source package in Trusty: Invalid Status in “linux-ec2” source package in Trusty: Invalid Status in “linux-fsl-imx51” source package in Trusty: Invalid Status in “linux-lts-backport-maverick” source package in Trusty: Won't Fix Status in “linux-lts-backport-natty” source package in Trusty: Won't Fix Status in “linux-lts-quantal” source package in Trusty: Invalid Status in “linux-lts-raring” source package in Trusty: Invalid Status in “linux-lts-saucy” source package in Trusty: Invalid Status in “linux-mvl-dove” source package in Trusty: Invalid Status in “linux-ti-omap4” source
[Kernel-packages] [Bug 1279796] [NEW] Broadcom cardreader cant format/write Image to SdCards
You have been subscribed to a public bug: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: bot-comment precise saucy trusty -- Broadcom cardreader cant format/write Image to SdCards https://bugs.launchpad.net/bugs/1279796 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279840] Re: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure
** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279840 Title: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: I updated and everything went fine. It required a restart and when I logged back in I got this error. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.28 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alex 1898 F pulseaudio Date: Thu Feb 13 06:34:55 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=c4fe2035-95a5-4274-9d59-987f4b0230cf InstallationDate: Installed on 2014-02-11 (2 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140210) InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 002 Device 003: ID 064e:e263 Suyin Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Hewlett-Packard HP 2000 Notebook PC ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-8-generic.efi.signed root=UUID=0593c186-c19e-4f92-82f2-42910b127a41 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 02/21/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.26 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 1854 dmi.board.vendor: Hewlett-Packard dmi.board.version: 64.22 dmi.chassis.asset.tag: 5CG31815Q0 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.26:bd02/21/2013:svnHewlett-Packard:pnHP2000NotebookPC:pvr088A1230591620100:rvnHewlett-Packard:rn1854:rvr64.22:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP 2000 Notebook PC dmi.product.version: 088A1230591620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279840/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279569] Re: Backlight control suddenly stops working on ThinkPad T420
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc2-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279569 Title: Backlight control suddenly stops working on ThinkPad T420 Status in “linux” package in Ubuntu: Incomplete Bug description: Backlight control with Fn+Home, Fn+End stopped working for me today out of nothing. I am not aware of any changes that might have caused it. I am installing updates as they come, so it could have been an update. I followed the guidelines at https://wiki.ubuntu.com/Kernel/Debugging/Backlight I can change brightness by writing to /sys/class/backlight/intel_backlight/brightness, for example echo 1000 /sys/class/backlight/intel_backlight/brightness None of the kernel parameters changed the behavior..., not even thinkpad-acpi.brightness_enable=1 acpi_backlight=vendor - that is even with these parameters the brightness control shortcuts don't work and changing brightness by writing to the above file does work. I am not aware of any brightness changing applet I could try. I'm using Gnome Shell if that matters. Let me know what I can do, thank you. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-15-generic 3.11.0-15.25 ProcVersionSignature: Ubuntu 3.11.0-15.25-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: jakub 2972 F pulseaudio /dev/snd/controlC0: jakub 2972 F pulseaudio Date: Wed Feb 12 23:10:06 2014 HibernationDevice: RESUME=UUID=9009e872-0f42-4632-bc0a-4a70931f9767 InstallationDate: Installed on 2011-06-06 (982 days ago) InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) MachineType: LENOVO 4180W1G MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=e79e9934-9ad4-4091-8b9d-2ef7b1dba68e ro video.use_bios_initial_backlight=0 quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116.1 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-11-13 (91 days ago) dmi.bios.date: 10/31/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 83ET66WW (1.36 ) dmi.board.asset.tag: Not Available dmi.board.name: 4180W1G dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr83ET66WW(1.36):bd10/31/2011:svnLENOVO:pn4180W1G:pvrThinkPadT420:rvnLENOVO:rn4180W1G:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4180W1G dmi.product.version: ThinkPad T420 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279569/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279522] Re: [Acer Aspire one] suspend/resume failure
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc2-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279522 Title: [Acer Aspire one] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: In attempting to resume after suspension, the screen was just off, black. I had to force shutdown. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.27 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic i686 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lightdm1243 F pulseaudio corrado2321 F pulseaudio /dev/snd/pcmC0D0p: corrado2321 F...m pulseaudio CurrentDmesg: [ 120.678109] perf samples too long (2513 2500), lowering kernel.perf_event_max_sample_rate to 5 Date: Wed Feb 12 22:03:49 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=192a6da9-1e42-437a-8ff9-4099a2d16ea5 InstallationDate: Installed on 2014-02-02 (9 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha i386 (20140202) InterpreterPath: /usr/bin/python3.3 MachineType: Acer Aspire one ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic root=UUID=93b02eff-9f12-44b6-9864-87fb1bc5c158 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.123 SourcePackage: linux Title: [Acer Aspire one] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 09/28/2009 dmi.bios.vendor: Acer dmi.bios.version: V1.21 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Aspire one dmi.board.vendor: Acer dmi.board.version: V1.21 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.21 dmi.modalias: dmi:bvnAcer:bvrV1.21:bd09/28/2009:svnAcer:pnAspireone:pvrV1.21:rvnAcer:rnAspireone:rvrV1.21:cvnAcer:ct10:cvrV1.21: dmi.product.name: Aspire one dmi.product.version: V1.21 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279522/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279556] Re: [LENOVO 20175] suspend/resume failure
** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279556 Title: [LENOVO 20175] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: My computer had shutdown because it ran out of power, not completley, but was critical and safely shutdown. The UI crashes on when I turned it back on after plugging it into an outlet. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.27 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mde2169 F pulseaudio Date: Wed Feb 12 15:57:36 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=4b02de3a-6bd8-437e-a49b-9dd4d9db3499 InstallationDate: Installed on 2014-01-26 (17 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140124) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 20175 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic.efi.signed root=UUID=44214fb9-9581-4d14-8f1b-e2193755b05e ro quiet splash acpi_backlight=vendor vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 SourcePackage: linux StagingDrivers: rts5139 Title: [LENOVO 20175] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 01/21/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 66CN54WW dmi.board.asset.tag: No Asset Tag dmi.board.name: INVALID dmi.board.vendor: LENOVO dmi.board.version: 3193WIN8 STD MLT dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo IdeaPad Yoga 13 dmi.modalias: dmi:bvnLENOVO:bvr66CN54WW:bd01/21/2013:svnLENOVO:pn20175:pvrLenovoIdeaPadYoga13:rvnLENOVO:rnINVALID:rvr3193WIN8STDMLT:cvnLENOVO:ct10:cvrLenovoIdeaPadYoga13: dmi.product.name: 20175 dmi.product.version: Lenovo IdeaPad Yoga 13 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279556/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279796] Re: Broadcom cardreader cant format/write Image to SdCards
After asking back in irc's ubuntu-bug i was suggested to just addlinux as the package. The relevant Kernel verisons are listed under tec. details. bst.rgrds,me ** Package changed: ubuntu = linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Incomplete Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279051] Re: [TOSHIBA Tecra A6] suspend/resume failure
** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279051 Title: [TOSHIBA Tecra A6] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: slow booting time with a reprt of a problem ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.27 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic i686 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lightdm1737 F pulseaudio stephen2444 F pulseaudio Date: Tue Feb 11 12:06:38 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=ad1dd082-1601-4582-a5b4-19eabdcb9e27 InstallationDate: Installed on 2014-01-31 (10 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha i386 (20140124) InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: TOSHIBA Tecra A6 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-8-generic root=UUID=5b41a9fb-446f-4f28-ad19-62c1d1691c6d ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.123 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [TOSHIBA Tecra A6] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/15/2008 dmi.bios.vendor: TOSHIBA dmi.bios.version: V3.00 dmi.board.name: HAQAA dmi.board.vendor: TOSHIBA dmi.board.version: Null dmi.chassis.asset.tag: * dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: N/A dmi.modalias: dmi:bvnTOSHIBA:bvrV3.00:bd12/15/2008:svnTOSHIBA:pnTecraA6:pvrVersion1.0:rvnTOSHIBA:rnHAQAA:rvrNull:cvnTOSHIBA:ct10:cvrN/A: dmi.product.name: Tecra A6 dmi.product.version: Version 1.0 dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279051/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1261568] Re: CVE-2013-6368
** Changed in: linux-armadaxp (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-lts-quantal (Ubuntu Precise) Status: New = Fix Committed ** Changed in: linux (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Saucy) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Quantal) Status: New = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1261568 Title: CVE-2013-6368 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Won't Fix Status in “linux-lts-backport-natty” package in Ubuntu: Won't Fix Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: Invalid Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: New Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: New Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Won't Fix Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: Invalid Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux” source package in Precise: New Status in “linux-armadaxp” source package in Precise: New Status in “linux-ec2” source package in Precise: Invalid Status in “linux-fsl-imx51” source package in Precise: Invalid Status in “linux-lts-backport-maverick” source package in Precise: Won't Fix Status in “linux-lts-backport-natty” source package in Precise: Won't Fix Status in “linux-lts-quantal” source package in Precise: Fix Committed Status in “linux-lts-raring” source package in Precise: New Status in “linux-lts-saucy” source package in Precise: Fix Committed Status in “linux-mvl-dove” source package in Precise: Invalid Status in “linux-ti-omap4” source package in Precise: New Status in “linux” source package in Quantal: Fix Committed Status in “linux-armadaxp” source package in Quantal: Fix Committed Status in “linux-ec2” source package in Quantal: Invalid Status in “linux-fsl-imx51” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Quantal: Won't Fix Status in “linux-lts-backport-natty” source package in Quantal: Won't Fix Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux-lts-raring” source package in Quantal: Invalid Status in “linux-lts-saucy” source package in Quantal: Invalid Status in “linux-mvl-dove” source package in Quantal: Invalid Status in “linux-ti-omap4” source package in Quantal: Fix Committed Status in “linux-lts-backport-maverick” source package in Raring: Won't Fix Status in “linux-lts-backport-natty” source package in Raring: Won't Fix Status in “linux” source package in Saucy: Fix Committed Status in “linux-armadaxp” source package in Saucy: Invalid Status in “linux-ec2” source package in Saucy: Invalid Status in “linux-fsl-imx51” source package in Saucy: Invalid Status in “linux-lts-backport-maverick” source package in Saucy: Won't Fix Status in “linux-lts-backport-natty” source package in Saucy: Won't Fix Status in “linux-lts-quantal” source package in Saucy: Invalid Status in “linux-lts-raring” source package in Saucy: Invalid Status in “linux-lts-saucy” source package in Saucy: Invalid Status in “linux-mvl-dove” source package in Saucy: Invalid Status in “linux-ti-omap4” source package in Saucy: Fix Committed Status in “linux” source package in Trusty: Invalid Status in “linux-armadaxp” source package in Trusty: Invalid Status in “linux-ec2” source package in Trusty: Invalid Status in “linux-fsl-imx51” source package in Trusty: Invalid Status in “linux-lts-backport-maverick” source package in Trusty: Won't Fix Status in “linux-lts-backport-natty” source package in Trusty: Won't Fix Status in “linux-lts-quantal” source package in Trusty: Invalid Status in “linux-lts-raring” source package in Trusty: Invalid Status in “linux-lts-saucy” source package in Trusty: Invalid Status in “linux-mvl-dove” source package in Trusty: Invalid Status in “linux-ti-omap4” source package in Trusty: Invalid Bug description:
[Kernel-packages] [Bug 1279059] Re: [TOSHIBA SATELLITE C50D-A-11G] suspend/resume failure [non-free: fglrx]
** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279059 Title: [TOSHIBA SATELLITE C50D-A-11G] suspend/resume failure [non-free: fglrx] Status in “linux” package in Ubuntu: Incomplete Bug description: just after login. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.27 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 NonfreeKernelModules: fglrx Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: kostro 1928 F pulseaudio /dev/snd/controlC0: kostro 1928 F pulseaudio Date: Tue Feb 11 17:46:35 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=76b3328b-1587-4b75-89a3-f9573a655733 InstallationDate: Installed on 2014-01-20 (22 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140115) InterpreterPath: /usr/bin/python3.3 MachineType: TOSHIBA SATELLITE C50D-A-11G ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic.efi.signed root=UUID=7fcf011c-2166-4e83-a4da-112eda4bec22 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.123 SourcePackage: linux Title: [TOSHIBA SATELLITE C50D-A-11G] suspend/resume failure [non-free: fglrx] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 04/25/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.00 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: PT10ABX dmi.board.vendor: AMD dmi.board.version: Base Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr1.00:bd04/25/2013:svnTOSHIBA:pnSATELLITEC50D-A-11G:pvrPSCHNE-00N00MN5:rvnAMD:rnPT10ABX:rvrBaseBoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.name: SATELLITE C50D-A-11G dmi.product.version: PSCHNE-00N00MN5 dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279059/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1256091] Re: CVE-2013-6382
** Changed in: linux-armadaxp (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-lts-quantal (Ubuntu Precise) Status: New = Fix Committed ** Changed in: linux (Ubuntu Quantal) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Saucy) Status: New = Fix Committed ** Changed in: linux-ti-omap4 (Ubuntu Quantal) Status: New = Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-armadaxp in Ubuntu. https://bugs.launchpad.net/bugs/1256091 Title: CVE-2013-6382 Status in “linux” package in Ubuntu: Invalid Status in “linux-armadaxp” package in Ubuntu: Invalid Status in “linux-ec2” package in Ubuntu: Invalid Status in “linux-fsl-imx51” package in Ubuntu: Invalid Status in “linux-lts-backport-maverick” package in Ubuntu: Won't Fix Status in “linux-lts-backport-natty” package in Ubuntu: Won't Fix Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: Invalid Status in “linux-lts-saucy” package in Ubuntu: Invalid Status in “linux-mvl-dove” package in Ubuntu: Invalid Status in “linux-ti-omap4” package in Ubuntu: Invalid Status in “linux” source package in Lucid: Fix Committed Status in “linux-armadaxp” source package in Lucid: Invalid Status in “linux-ec2” source package in Lucid: Fix Committed Status in “linux-fsl-imx51” source package in Lucid: Invalid Status in “linux-lts-backport-maverick” source package in Lucid: Won't Fix Status in “linux-lts-backport-natty” source package in Lucid: Won't Fix Status in “linux-lts-quantal” source package in Lucid: Invalid Status in “linux-lts-raring” source package in Lucid: Invalid Status in “linux-lts-saucy” source package in Lucid: Invalid Status in “linux-mvl-dove” source package in Lucid: Invalid Status in “linux-ti-omap4” source package in Lucid: Invalid Status in “linux” source package in Precise: Fix Committed Status in “linux-armadaxp” source package in Precise: Fix Committed Status in “linux-ec2” source package in Precise: Invalid Status in “linux-fsl-imx51” source package in Precise: Invalid Status in “linux-lts-backport-maverick” source package in Precise: Won't Fix Status in “linux-lts-backport-natty” source package in Precise: Won't Fix Status in “linux-lts-quantal” source package in Precise: Fix Committed Status in “linux-lts-raring” source package in Precise: New Status in “linux-lts-saucy” source package in Precise: Fix Committed Status in “linux-mvl-dove” source package in Precise: Invalid Status in “linux-ti-omap4” source package in Precise: Fix Committed Status in “linux” source package in Quantal: Fix Committed Status in “linux-armadaxp” source package in Quantal: Fix Committed Status in “linux-ec2” source package in Quantal: Invalid Status in “linux-fsl-imx51” source package in Quantal: Invalid Status in “linux-lts-backport-maverick” source package in Quantal: Won't Fix Status in “linux-lts-backport-natty” source package in Quantal: Won't Fix Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux-lts-raring” source package in Quantal: Invalid Status in “linux-lts-saucy” source package in Quantal: Invalid Status in “linux-mvl-dove” source package in Quantal: Invalid Status in “linux-ti-omap4” source package in Quantal: Fix Committed Status in “linux-lts-backport-maverick” source package in Raring: Won't Fix Status in “linux-lts-backport-natty” source package in Raring: Won't Fix Status in “linux” source package in Saucy: Fix Committed Status in “linux-armadaxp” source package in Saucy: Invalid Status in “linux-ec2” source package in Saucy: Invalid Status in “linux-fsl-imx51” source package in Saucy: Invalid Status in “linux-lts-backport-maverick” source package in Saucy: Won't Fix Status in “linux-lts-backport-natty” source package in Saucy: Won't Fix Status in “linux-lts-quantal” source package in Saucy: Invalid Status in “linux-lts-raring” source package in Saucy: Invalid Status in “linux-lts-saucy” source package in Saucy: Invalid Status in “linux-mvl-dove” source package in Saucy: Invalid Status in “linux-ti-omap4” source package in Saucy: Fix Committed Status in “linux” source package in Trusty: Invalid Status in “linux-armadaxp” source package in Trusty: Invalid Status in “linux-ec2” source package in Trusty: Invalid Status in “linux-fsl-imx51” source package in Trusty: Invalid Status in “linux-lts-backport-maverick” source package in Trusty: Won't Fix Status in “linux-lts-backport-natty” source package in Trusty: Won't Fix Status in “linux-lts-quantal” source package in Trusty: Invalid Status in “linux-lts-raring” source package in Trusty: Invalid Status in “linux-lts-saucy” source package in Trusty: Invalid Status in “linux-mvl-dove” source package in Trusty: Invalid Status in “linux-ti-omap4” source
[Kernel-packages] [Bug 1229591] Re: 8086:0116 [Dell Inspiron 14z (N411z)] Display brightness keys don't generate evdev events after saucy upgrade
Just to add that I have today updated my BIOS to the latest available for my laptop (I had A02 and I updated to A06), however the brightness function keys still don't work. So we will have to wait for a fix to be included in a newer kernel. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1229591 Title: 8086:0116 [Dell Inspiron 14z (N411z)] Display brightness keys don't generate evdev events after saucy upgrade Status in “linux” package in Ubuntu: Confirmed Bug description: On raring (and precise) the display brightness keys (fn+f4 and fn+f5) on my Dell Inspiron 14z turned the brightness up and down. After a saucy upgrade this no longer happens (I don't see the popup brightness bubble either). The other, similar keys (volume adjustment, etc) still work fine. Changing the values in /sys/class/backlight/intel_backlight/brightness works (temporarily - it gets reset after the screen lock kicks in) I tried following the instructions in https://wiki.ubuntu.com/Hotkeys/Troubleshooting but this appears to be out of date (it references /usr/share/doc/udev/README.keymap.txt which does not exist) Ubuntu kernel version bisect revealed: First bad Ubuntu kernel: 3.11.0-0.2 last good Ubuntu kernel: 3.10.0-6.17 The results of a commit bisect are pending. --- ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: chris 2646 F pulseaudio DistroRelease: Ubuntu 13.10 EcryptfsInUse: Yes InstallationDate: Installed on 2011-11-18 (675 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) MachineType: Dell Inc. Dell System Inspiron N411Z MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-8-generic root=UUID=8bcbab07-7d4f-4c89-b6db-54aeed6ad1c4 ro quiet splash pcie_aspm=force i915.i915_enable_rc6=1 vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-8.15-generic 3.11.1 RelatedPackageVersions: linux-restricted-modules-3.11.0-8-generic N/A linux-backports-modules-3.11.0-8-generic N/A linux-firmware1.114 Tags: saucy Uname: Linux 3.11.0-8-generic x86_64 UpgradeStatus: Upgraded to saucy on 2013-09-21 (2 days ago) UserGroups: adm admin cdrom davfs2 dialout lpadmin plugdev sambashare dmi.bios.date: 09/10/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A06 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 0P01VP dmi.board.vendor: Dell Inc. dmi.board.version: FAB1 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA06:bd09/10/2012:svnDellInc.:pnDellSystemInspironN411Z:pvr:rvnDellInc.:rn0P01VP:rvrFAB1:cvnDellInc.:ct8:cvr0.1: dmi.product.name: Dell System Inspiron N411Z dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1229591/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276705] Re: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR)
This one is good, it is working: [...] Linux version 3.12.0-031200rc5-generic (jsalisbury@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201402131150 SMP Thu Feb 13 16:54:49 UTC 2014 [...] -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276705 Title: Kernel 3.13 fail to boot with LSI SAS1068E (Dell SAS 6/iR) Status in “linux” package in Ubuntu: Confirmed Bug description: We have recently upgraded an Dell R300 server to Trusty (was running fine in precise), and after upgrade it fail to boot. It is an issue with the SAS controller during the initilisation. It fail to detect the disk, we have the following error in console log: [ 36.539955] scsi4: error handler thread failed to spawn, error = -12 [ 36.552694] mptsas: ioc0: WARNING - Unable to register controller with SCSI subsystem After this error, initramfs drop to a shell complaining that rootfs is not found. No disk is seen at all (cat /proc/partition only show sr0 - cdrom drive). We have this issue with two different server (both R300, both Dell SAS 6/iR controller and same hardware). We don't have this issue with another Dell server (R310, Dell PERC H200). We also tester with old kernel (generic, 3.2.0-58.88), it is working. Those server need a greater rootdelay (probably #579572), so we have rootdelay=45. If we remove rootdelay=45, then disk are correctly recognized ! (but few second too late, initramfs dropped to a shell. Pressing control-D resume normal boot) So the issue is that with the (mandatory) rootdelay greater that 30 (default value I think), the disk are not detected due to the error shown above. This is a regression since those server worked in precise (and work with precise old kernel). System information * Dell R300 with Dell SAS 6/iR controller * Ubuntu Trusty Tahr (14.04) * Running arch: x86_64 * Kernel version: 3.13.0-7-generic (dpkg version : 3.13.0-7.25) * Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-7-generic root=UUID=174e14b5-46fc-479b-9f94-05cb33c75ac9 ro rootdelay=45 console=tty0 console=ttyS1,57600 quiet * uname -a: Linux frtls-perf01 3.13.0-7-generic #25-Ubuntu SMP Tue Feb 4 10:19:12 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Attached files: * console output when error occure. * dmesg when system boot (no rootdelay, need to press control-d during initramfs boot) * lspci -vnn Tell me if you need more informations. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276705/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279282] Re: There are no LCD backlight brightness function and OSD with Fn hot keys under Ubuntu 13.10.
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc2-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279282 Title: There are no LCD backlight brightness function and OSD with Fn hot keys under Ubuntu 13.10. Status in “linux” package in Ubuntu: Incomplete Bug description: Steps to reproduce : #1. Install Ubuntu 13.10 x64 #2. Change OS indication. $ sudo gedit /etc/default/grub Find GRUB_CMDLINE_LINUX_DEFAULT=quiet splash Change to GRUB_CMDLINE_LINUX_DEFAULT=quiet splash acpi_os_name=Linux acpi_osi= $ sudo update-grub (Reboot) #3.Press hot key Fn+F8 or Fn+F9. More information : Our BIOS engineer had already checked the ACPI ASL code and all the necessary event notifications are normally notified as expected while Fn hot key pressed. Butthis issue is still there. We think there is no Intel graphics driver in Ubuntu 13.10.That's why we need it. There is no problem for all our Shark Bay models with the same ASL event notification under Ubuntu 13.10. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279282/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1276037] Re: [Thinkpad T420s] Brightness dims when unplugging external monitor and cannot be changed afterwards
The 3.13.2 kernel was also just recently released. Can you give that one a test, to see if the fix from 3.14-rc1 made it to stable already? If not, we can bisect: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.13.2-trusty/ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1276037 Title: [Thinkpad T420s] Brightness dims when unplugging external monitor and cannot be changed afterwards Status in “linux” package in Ubuntu: Confirmed Bug description: Steps to reproduce 1) Plug a T420s to an external monitor using Displayport 2) Both external and internal monitor look right 3) Unplug (via software or hardware) the external monitor Expected results: The brightness in the internal monitor stays the same and it can be changed through system keys or system settings Actual results: The brightness in the internal monitor dims and it cannot be changed until the system is rebooted ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-6-generic 3.13.0-6.23 ProcVersionSignature: Ubuntu 3.13.0-6.23-generic 3.13.0 Uname: Linux 3.13.0-6-generic x86_64 ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ara2409 F pulseaudio CurrentDesktop: Unity Date: Tue Feb 4 09:06:02 2014 HibernationDevice: RESUME=UUID=85ebfa4c-a925-4edf-9764-79ecfaa29ae6 InstallationDate: Installed on 2013-06-17 (231 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424) MachineType: LENOVO 4171CTO ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-6-generic root=UUID=35693a74-fe03-4399-920c-24bfaf0a5649 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-6-generic N/A linux-backports-modules-3.13.0-6-generic N/A linux-firmware1.123 SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-01-20 (14 days ago) dmi.bios.date: 07/11/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 8CET54WW (1.34 ) dmi.board.asset.tag: Not Available dmi.board.name: 4171CTO dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8CET54WW(1.34):bd07/11/2012:svnLENOVO:pn4171CTO:pvrThinkPadT420s:rvnLENOVO:rn4171CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4171CTO dmi.product.version: ThinkPad T420s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1276037/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279796] Re: Broadcom cardreader cant format/write Image to SdCards
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc2-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Incomplete Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279796] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run: apport-collect 1279796 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Incomplete Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279308] Re: [MacBook Air 6, 2] screen backlight brightness and keyboard light turn into fully-on after Grub boot with i915 driver
** Changed in: linux (Ubuntu) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279308 Title: [MacBook Air 6,2] screen backlight brightness and keyboard light turn into fully-on after Grub boot with i915 driver Status in “linux” package in Ubuntu: Incomplete Bug description: Problem: Both the screen backlight brightness and keyboard light are turned on during the booting as tested on ubuntu 12.04.3, 12.04.4, and 13.10. Due to installation problem on 12.04, it's only tested with the live system. What's expected: the brightness state before booting is preserved. Some trials: the problem should be on i915 driver even in single user mode. Tried nomodeset kerenel arguement can avoid the problem, but X will fail to start. --- ApportVersion: 2.12.5-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: john 1776 F pulseaudio /dev/snd/controlC1: john 1776 F pulseaudio DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2014-02-10 (1 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: Apple Inc. MacBookAir6,2 MarkForUpload: True NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-15-generic.efi.signed root=UUID=b52fef82-3749-4624-a352-bd750dcb7e65 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-15.25-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.116 Tags: saucy Uname: Linux 3.11.0-15-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 11/12/2013 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B07.1311121319 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-7DF21CB3ED6977E5 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,2 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-7DF21CB3ED6977E5 dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B07.1311121319:bd11/12/2013:svnAppleInc.:pnMacBookAir6,2:pvr1.0:rvnAppleInc.:rnMac-7DF21CB3ED6977E5:rvrMacBookAir6,2:cvnAppleInc.:ct10:cvrMac-7DF21CB3ED6977E5: dmi.product.name: MacBookAir6,2 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279308/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279081] Re: linux freezes with threadirqs parameter when rt73usb is loaded
I can confirm that booting linux-lowlatency with nothreadirqs boot parameter worked, while having the wifi device attached. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279081 Title: linux freezes with threadirqs parameter when rt73usb is loaded Status in “linux” package in Ubuntu: Confirmed Bug description: While my usb wifi device is connected, the kernel will freeze while booting. I can boot into recovery mode, but freeze happens as soon as I enable networking. I can boot and login fine without the device attached. As soon as I plug it in, the system freezes. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-lowlatency 3.13.0.8.12 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic i686 ApportVersion: 2.13.2-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: zequence 2598 F pulseaudio /dev/snd/controlC2: zequence 2598 F pulseaudio /dev/snd/controlC0: zequence 2598 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: GNOME Date: Tue Feb 11 22:02:39 2014 HibernationDevice: RESUME=UUID=ede81b37-17df-4f30-a234-1f1fb7f003ad MachineType: Gigabyte Technology Co., Ltd. 965P-DS4 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic root=UUID=7e51aea4-9325-401e-b318-bbf42e368c45 ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2013-10-11 (123 days ago) dmi.bios.date: 06/25/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F12 dmi.board.name: 965P-DS4 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF12:bd06/25/2009:svnGigabyteTechnologyCo.,Ltd.:pn965P-DS4:pvr:rvnGigabyteTechnologyCo.,Ltd.:rn965P-DS4:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: 965P-DS4 dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279081/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1278154] Re: onboard usb 3.0 ports stay in deep sleep
** Tags added: needs-bisect ** Changed in: linux (Ubuntu) Status: Confirmed = Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1278154 Title: onboard usb 3.0 ports stay in deep sleep Status in “linux” package in Ubuntu: Triaged Bug description: they were working fine in 13.10, now only the yellow usb 2.0 port of my laptop has power setting power/control to on and power/autosuspend to -1 on usb6 doesn't make them wake up ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.27 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: amery 3486 F pulseaudio /dev/snd/controlC0: amery 3486 F pulseaudio CurrentDesktop: XFCE Date: Sun Feb 9 20:06:01 2014 HibernationDevice: RESUME=UUID=e612032e-4ee4-4559-8926-d6e04d8bb11a InstallationDate: Installed on 2014-01-30 (9 days ago) InstallationMedia: Xubuntu 13.10 Saucy Salamander - Release amd64 (20131016) MachineType: LENOVO 20BCCTO1WW ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-8-generic.efi.signed root=UUID=1672afa3-75b9-40c2-8aa9-fca7e732495e ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.123 SourcePackage: linux UpgradeStatus: Upgraded to trusty on 2014-01-30 (9 days ago) dmi.bios.date: 11/20/2013 dmi.bios.vendor: LENOVO dmi.bios.version: HSET56WW (2.01 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BCCTO1WW dmi.board.vendor: LENOVO dmi.board.version: Win8 Pro DPK TPG dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrHSET56WW(2.01):bd11/20/2013:svnLENOVO:pn20BCCTO1WW:pvrThinkPadEdgeE145:rvnLENOVO:rn20BCCTO1WW:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 20BCCTO1WW dmi.product.version: ThinkPad Edge E145 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1278154/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1278679] Re: [Acer Extensa 5220] suspend/resume failure
This issue appears to be an upstream bug, since you tested the latest upstream kernel. Would it be possible for you to open an upstream bug report[0]? That will allow the upstream Developers to examine the issue, and may provide a quicker resolution to the bug. Please follow the instructions on the wiki page[0]. The first step is to email the appropriate mailing list. If no response is received, then a bug may be opened on bugzilla.kernel.org. Once this bug is reported upstream, please add the tag: 'kernel-bug- reported-upstream'. [0] https://wiki.ubuntu.com/Bugs/Upstream/kernel ** Changed in: linux (Ubuntu) Status: Confirmed = Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1278679 Title: [Acer Extensa 5220] suspend/resume failure Status in “linux” package in Ubuntu: Triaged Bug description: wakeup failed ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.27 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thomas 1913 F pulseaudio CurrentDmesg: [ 10.634723] tg3 :02:00.0 eth0: Flow control is on for TX and on for RX [ 10.634738] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Mon Feb 10 18:11:41 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=dceef174-e6ec-4cf6-8d1e-c66678c0613d InstallationDate: Installed on 2013-11-24 (78 days ago) InstallationMedia: Ubuntu-GNOME 13.10 Saucy Salamander - Release amd64 (20131017) InterpreterPath: /usr/bin/python3.3 MachineType: Acer Extensa 5220 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-8-generic root=UUID=22281f46-1fb6-4b8b-a48f-2290b8de35f0 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.123 SourcePackage: linux Title: [Acer Extensa 5220] suspend/resume failure UpgradeStatus: Upgraded to trusty on 2013-12-29 (43 days ago) UserGroups: dmi.bios.date: 07/03/2008 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.35 dmi.board.name: Columbia dmi.board.vendor: Acer dmi.board.version: Rev dmi.chassis.asset.tag: None dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.35:bd07/03/2008:svnAcer:pnExtensa5220:pvr0100:rvnAcer:rnColumbia:rvrRev:cvnAcer:ct10:cvrN/A: dmi.product.name: Extensa 5220 dmi.product.version: 0100 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1278679/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279041] Re: /proc/sys/net/ipv4/ip_local_reserved_ports not writable because of apparmor
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.13 kernel[0]. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as Confirmed. Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.14-rc2-trusty/ ** Changed in: linux (Ubuntu) Importance: Undecided = Medium -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279041 Title: /proc/sys/net/ipv4/ip_local_reserved_ports not writable because of apparmor Status in “linux” package in Ubuntu: Confirmed Status in “lxc” package in Ubuntu: Confirmed Bug description: Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 arch: amd64 Kernel: 3.13.0-8-generic #27-Ubuntu x86_64 GNU/Linux LXC container lxc-create --version 1.0.0.beta4 file: /proc/sys/net/ipv4/ip_local_reserved_port Does not exist and is not writable in a started container. Apparmor seems to block creating this file? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279041/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1278493] Re: [T-Group 945P-A] suspend/resume failure [non-free: nvidia]
This issue appears to be an upstream bug, since you tested the latest upstream kernel. Would it be possible for you to open an upstream bug report[0]? That will allow the upstream Developers to examine the issue, and may provide a quicker resolution to the bug. Please follow the instructions on the wiki page[0]. The first step is to email the appropriate mailing list. If no response is received, then a bug may be opened on bugzilla.kernel.org. Once this bug is reported upstream, please add the tag: 'kernel-bug- reported-upstream'. [0] https://wiki.ubuntu.com/Bugs/Upstream/kernel ** Changed in: linux (Ubuntu) Status: Confirmed = Triaged -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1278493 Title: [T-Group 945P-A] suspend/resume failure [non-free: nvidia] Status in “linux” package in Ubuntu: Triaged Bug description: Ubuntu can't return from standby mode in the usual way. Probably something with the video card driver as a signal to the monitor from the video card does not arrive. Pressing the reset does not help. Installing an alternative video driver nvidia-331-updates does not lead to visible results: the system still does not return from sleep mode. PS: Sorry for bad English. ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.27 ProcVersionSignature: Ubuntu 3.13.0-8.27-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 NonfreeKernelModules: nvidia Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sergey 1718 F pulseaudio Date: Mon Feb 10 19:36:02 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=c8403ae8-0f91-4a3a-8e21-cc4ecfc120ff InstallationDate: Installed on 2014-01-31 (9 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140115) InterpreterPath: /usr/bin/python3.3 MachineType: T-Group 945P-A ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-8-generic root=UUID=de7ef9d4-80b4-4d54-9752-cae88d3fbfdd ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.123 RfKill: SourcePackage: linux Title: [T-Group 945P-A] suspend/resume failure [non-free: nvidia] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/24/2006 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080012 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 945P-A dmi.board.vendor: ECS dmi.board.version: 1.X dmi.chassis.asset.tag: 0123ABC dmi.chassis.type: 3 dmi.chassis.vendor: ECS dmi.chassis.version: 1.X dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080012:bd07/24/2006:svnT-Group:pn945P-A:pvr1.X:rvnECS:rn945P-A:rvr1.X:cvnECS:ct3:cvr1.X: dmi.product.name: 945P-A dmi.product.version: 1.X dmi.sys.vendor: T-Group To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1278493/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279929] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279929 Title: [LENOVO 4290W4H] hibernate/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: nixh ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.28 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: rm 1876 F pulseaudio Date: Thu Feb 13 19:51:14 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=bfaf0697-b328-4f42-b3a6-5326389b64f7 InstallationDate: Installed on 2014-02-07 (5 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140206) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 4290W4H ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.13.0-8-generic root=UUID=2dea7c7b-721d-4877-8452-4a7193253789 ro rootflags=subvol=@ quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 SourcePackage: linux Title: [LENOVO 4290W4H] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/05/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET67WW (1.37 ) dmi.board.asset.tag: Not Available dmi.board.name: 4290W4H dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4290W4H:pvrThinkPadX220:rvnLENOVO:rn4290W4H:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4290W4H dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279929/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279929] [NEW] [LENOVO 4290W4H] hibernate/resume failure
Public bug reported: nixh ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.28 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: rm 1876 F pulseaudio Date: Thu Feb 13 19:51:14 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=bfaf0697-b328-4f42-b3a6-5326389b64f7 InstallationDate: Installed on 2014-02-07 (5 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140206) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 4290W4H ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.13.0-8-generic root=UUID=2dea7c7b-721d-4877-8452-4a7193253789 ro rootflags=subvol=@ quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 SourcePackage: linux Title: [LENOVO 4290W4H] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/05/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET67WW (1.37 ) dmi.board.asset.tag: Not Available dmi.board.name: 4290W4H dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4290W4H:pvrThinkPadX220:rvnLENOVO:rn4290W4H:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4290W4H dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-kerneloops hibernate resume trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279929 Title: [LENOVO 4290W4H] hibernate/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: nixh ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-8-generic 3.13.0-8.28 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.13.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: rm 1876 F pulseaudio Date: Thu Feb 13 19:51:14 2014 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=bfaf0697-b328-4f42-b3a6-5326389b64f7 InstallationDate: Installed on 2014-02-07 (5 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140206) InterpreterPath: /usr/bin/python3.3 MachineType: LENOVO 4290W4H ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.13.0-8-generic root=UUID=2dea7c7b-721d-4877-8452-4a7193253789 ro rootflags=subvol=@ quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-8-generic N/A linux-backports-modules-3.13.0-8-generic N/A linux-firmware1.124 SourcePackage: linux Title: [LENOVO 4290W4H] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/05/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 8DET67WW (1.37 ) dmi.board.asset.tag: Not Available dmi.board.name: 4290W4H dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr8DET67WW(1.37):bd12/05/2012:svnLENOVO:pn4290W4H:pvrThinkPadX220:rvnLENOVO:rn4290W4H:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 4290W4H dmi.product.version: ThinkPad X220 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279929/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] Card0.Codecs.codec.3.txt
apport information ** Attachment added: Card0.Codecs.codec.3.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979973/+files/Card0.Codecs.codec.3.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] CRDA.txt
apport information ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979970/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to
[Kernel-packages] [Bug 1279796] Re: Broadcom cardreader cant format/write Image to SdCards
apport information ** Tags added: apport-collected running-unity ** Description changed: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 + --- + AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. + ApportVersion: 2.0.1-0ubuntu17.6 + Architecture: i386 + ArecordDevices: + List of CAPTURE Hardware Devices + card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] +Subdevices: 1/1 +Subdevice #0: subdevice #0 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: me 1669 F pulseaudio + Card0.Amixer.info: + Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' +Mixer name : 'Intel PantherPoint HDMI' +Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' +Controls : 27 +Simple ctrls : 10 + DistroRelease: Ubuntu 12.04 + HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 + InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) + MachineType: Acer Aspire E1-530 + MarkForUpload: True + Package: linux (not installed) + ProcEnviron: + TERM=xterm + PATH=(custom, no user) + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor + ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 + RelatedPackageVersions: + linux-restricted-modules-3.11.0-15-generic N/A + linux-backports-modules-3.11.0-15-generic N/A + linux-firmware 1.79.9 + Tags: precise running-unity + Uname: Linux 3.11.0-15-generic i686 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark + dmi.bios.date: 07/30/2013 + dmi.bios.vendor: Insyde Corp. + dmi.bios.version: V2.02 + dmi.board.asset.tag: Type2 - Board Asset Tag + dmi.board.name: EA50_CX + dmi.board.vendor: Acer + dmi.board.version: V2.02 + dmi.chassis.asset.tag: Acer Asset Tag String + dmi.chassis.type: 10 + dmi.chassis.vendor: Insyde Corp. + dmi.chassis.version: V2.02 + dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: + dmi.product.name: Aspire E1-530 + dmi.product.version: V2.02 + dmi.sys.vendor: Acer ** Attachment added: AcpiTables.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979966/+files/AcpiTables.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image
[Kernel-packages] [Bug 1279796] Card0.Codecs.codec.0.txt
apport information ** Attachment added: Card0.Codecs.codec.0.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979972/+files/Card0.Codecs.codec.0.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979974/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979981/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] PciMultimedia.txt
apport information ** Attachment added: PciMultimedia.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979978/+files/PciMultimedia.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] Card0.Amixer.values.txt
apport information ** Attachment added: Card0.Amixer.values.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979971/+files/Card0.Amixer.values.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979977/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post
[Kernel-packages] [Bug 1279796] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979979/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] AplayDevices.txt
apport information ** Attachment added: AplayDevices.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979968/+files/AplayDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] AlsaDevices.txt
apport information ** Attachment added: AlsaDevices.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979967/+files/AlsaDevices.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979980/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list:
[Kernel-packages] [Bug 1279796] PulseList.txt
apport information ** Attachment added: PulseList.txt https://bugs.launchpad.net/bugs/1279796/+attachment/3979982/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279796 Title: Broadcom cardreader cant format/write Image to SdCards Status in “linux” package in Ubuntu: Confirmed Bug description: Description: It is impossible to either format a sdcard or write an image to it with dd or other tools. While formating (either with palimpsest, gparted or mkfs) the process just hangs without explicit errors. the dmesg shows the below listed errors. Just using palimpsest under 13.10 gives the below listed error. Its is possible to read from the card though and it is possible to write files 350 mb to the sd card. i used and cross checked four different sd cards which all worked nice on other systems. The problem persists using the freshest kernel available, i tested it with 14.04 daily and arch live. Another interesting fact is tha Ubuntu seems not to be able to load the relevant Firmware while booting up: Failed to load firmware tigon/tg357766.bin I already asked Broadcom for a firmware/driver for this netXtreme combo lan-sdcardreader chip, but they replied that they are not supporting Linux, although they have a driver downloadable for Linux at their Website. Patch: I found this patch which may be related/ be a solution for this Problem. But i dont know if this Patch is applieable against a actual Kernel, and i dont know how to use it in general. https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/fd1acc54a6b3db4e6503ccc4a9349f28b436031a Error: kernel: [ 22.317029] tg3 :02:00.0 eth0: Failed to load firmware tigon/tg357766.bin mmc0: Timeout waiting for hardware interrupt. Buffer I/O error on device mmcblk0p2 Buffer I/O error on device mmcblk0p2, logical block 198144 lost page write due to I/O error on mmcblk0p2 end_request: I/O error, dev mmcblk0, sector 1843208 Under 13.10 LiveCD using palimpsest: Error formating partition udisks-error-quark,0 Technical details : OS: Ubuntu 12.04.4 Precise Pangolin Linux box 3.11.0-15-generic #25~precise1-Ubuntu SMP i686 i686 i386 GNU/Linux Computer: Acer Aspire E1-530-21174G50Mnkk NX.MEQEG.004 Linux Hardware: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader Driver: sdhci-pci ; modinfo tg3 modinfo tg3 version: 3.132 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: me 1669 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc061 irq 44' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0282,10250835,0013 HDA:80862806,80860101,0010' Controls : 27 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=6ec997f9-cb9d-45e5-8ddb-f89b2e036744 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140203.1) MachineType: Acer Aspire E1-530 MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=c1589c93-6a40-4064-b400-2374d5feed93 ro acpi_osi=Linux acpi_backlight=vendor ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.9 Tags: precise running-unity Uname: Linux 3.11.0-15-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 07/30/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.02 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_CX dmi.board.vendor: Acer dmi.board.version: V2.02 dmi.chassis.asset.tag: Acer Asset Tag String dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.02:bd07/30/2013:svnAcer:pnAspireE1-530:pvrV2.02:rvnAcer:rnEA50_CX:rvrV2.02:cvnInsydeCorp.:ct10:cvrV2.02: dmi.product.name: Aspire E1-530 dmi.product.version: V2.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279796/+subscriptions -- Mailing list: