date:20150220

Sorry for the delay..
I just tested a bit more. Closing the lid actually doesn't turn of the light in
the screen/monitor and the fans are still runing.

The next test was with open lid and then waiting 5min until it should suspend
(as set via System Settings - Power).
I was streaming music to make it easier to tell when it would start to suspend.
Result:
After 1min the screen turns black as it should.
After 5min the music stops for 2-5sec and then both the screen turns on and the
music starts again
After 6min the screen turns black again.
After 10min the music stops for 2-5sec and then both the screen turns on and
the music starts again
Then I stopped the test.

Clicking Suspend in the top-left menu works perfectly. Both Suspending
and waking up again. On an earlier kernel it didn't want wake up again,
but now that part works :)

I will test the 3.19.0 kernel now and see if it makes any difference..

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420129

Title:
[Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]

Status in linux package in Ubuntu:
Incomplete

Bug description:
I closed the lid of the laptop, put the laptop in its case/sleeve and went
for an appointment. 2 hours later I took it out again and it was burning hot to
the touch! The fans were also running on full speed, but that doesn't help much
in the sleeve (luckily the laptop didn't die).
When I close the lid, it looks like the laptop hipernates, but apparently it
doesn't.
Also it will not wake up again. I just get a black screen. It will very
shortly (0.5sec) show the log in screen and then show a black screen again.
If there is anything I can do, just let me know -I'm trying out 15.04 to help.

ProblemType: KernelOops
DistroRelease: Ubuntu 15.04
Package: linux-image-3.18.0-12-generic 3.18.0-12.13
ProcVersionSignature: Ubuntu 3.18.0-12.13-generic 3.18.4
Uname: Linux 3.18.0-12-generic x86_64
NonfreeKernelModules: wl
Annotation: This occured during a previous suspend and prevented it from
resuming properly.
ApportVersion: 2.16-0ubuntu1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: mf 2205 F pulseaudio
/dev/snd/controlC0: mf 2205 F pulseaudio
Date: Mon Feb 9 22:01:34 2015
DuplicateSignature: suspend/resume:Apple Inc.
MacBookPro11,2:MBP112.88Z.0138.B14.1501071031
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
InstallationDate: Installed on 2015-02-02 (7 days ago)
InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150119)
InterpreterPath: /usr/bin/python3.4
MachineType: Apple Inc. MacBookPro11,2
ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
ProcEnviron:
TERM=linux
PATH=(custom, no user)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-12-generic.efi.signed
root=UUID=2e543fc7-3cde-472f-a2ba-529d7e91ac90 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-3.18.0-12-generic N/A
linux-backports-modules-3.18.0-12-generic N/A
linux-firmware 1.141
SourcePackage: linux
Title: [Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:

dmi.bios.date: 01/07/2015
dmi.bios.vendor: Apple Inc.
dmi.bios.version: MBP112.88Z.0138.B14.1501071031
dmi.board.asset.tag: Base Board Asset Tag#
dmi.board.name: Mac-3CBD00234E554E41
dmi.board.vendor: Apple Inc.
dmi.board.version: MacBookPro11,2
dmi.chassis.type: 10
dmi.chassis.vendor: Apple Inc.
dmi.chassis.version: Mac-3CBD00234E554E41
dmi.modalias:
dmi:bvnAppleInc.:bvrMBP112.88Z.0138.B14.1501071031:bd01/07/2015:svnAppleInc.:pnMacBookPro11,2:pvr1.0:rvnAppleInc.:rnMac-3CBD00234E554E41:rvrMacBookPro11,2:cvnAppleInc.:ct10:cvrMac-3CBD00234E554E41:
dmi.product.name: MacBookPro11,2
dmi.product.version: 1.0
dmi.sys.vendor: Apple Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420129/+subscriptions

--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1420129] Re: [Apple Inc. MacBookPro11, 2] suspend/resume failure [non-free: wl]

I can now confirm there is no difference in behavior between the two
kernels.

** Attachment added: kernel: 3.18.0-13.14-generic 3.18.5
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420129/+attachment/4323153/+files/dmesg2.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420129

Title:
  [Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I closed the lid of the laptop, put the laptop in its case/sleeve and went 
for an appointment. 2 hours later I took it out again and it was burning hot to 
the touch! The fans were also running on full speed, but that doesn't help much 
in the sleeve (luckily the laptop didn't die). 
  When I close the lid, it looks like the laptop hipernates, but apparently it 
doesn't. 
  Also it will not wake up again. I just get a black screen. It will very 
shortly (0.5sec) show the log in screen and then show a black screen again.
  If there is anything I can do, just let me know -I'm trying out 15.04 to help.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.18.0-12-generic 3.18.0-12.13
  ProcVersionSignature: Ubuntu 3.18.0-12.13-generic 3.18.4
  Uname: Linux 3.18.0-12-generic x86_64
  NonfreeKernelModules: wl
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.16-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mf 2205 F pulseaudio
   /dev/snd/controlC0:  mf 2205 F pulseaudio
  Date: Mon Feb  9 22:01:34 2015
  DuplicateSignature: suspend/resume:Apple Inc. 
MacBookPro11,2:MBP112.88Z.0138.B14.1501071031
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  InstallationDate: Installed on 2015-02-02 (7 days ago)
  InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150119)
  InterpreterPath: /usr/bin/python3.4
  MachineType: Apple Inc. MacBookPro11,2
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-12-generic.efi.signed 
root=UUID=2e543fc7-3cde-472f-a2ba-529d7e91ac90 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.18.0-12-generic N/A
   linux-backports-modules-3.18.0-12-generic  N/A
   linux-firmware 1.141
  SourcePackage: linux
  Title: [Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 01/07/2015
  dmi.bios.vendor: Apple Inc.
  dmi.bios.version: MBP112.88Z.0138.B14.1501071031
  dmi.board.asset.tag: Base Board Asset Tag#
  dmi.board.name: Mac-3CBD00234E554E41
  dmi.board.vendor: Apple Inc.
  dmi.board.version: MacBookPro11,2
  dmi.chassis.type: 10
  dmi.chassis.vendor: Apple Inc.
  dmi.chassis.version: Mac-3CBD00234E554E41
  dmi.modalias: 
dmi:bvnAppleInc.:bvrMBP112.88Z.0138.B14.1501071031:bd01/07/2015:svnAppleInc.:pnMacBookPro11,2:pvr1.0:rvnAppleInc.:rnMac-3CBD00234E554E41:rvrMacBookPro11,2:cvnAppleInc.:ct10:cvrMac-3CBD00234E554E41:
  dmi.product.name: MacBookPro11,2
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420129/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1318585] Re: NFSv3 exports not fully functional with older NFS clients

2015-02-20 Thread xor

Happens for me on 14.04 Stable. Note this means Solaris Servers
everywhere in the world running Solaris 10u10 cannot use an svn sandbox
on a Ubuntu based NFS server.

This is a very typical use case for build hosts.

Can anybody share a work around?

** Changed in: linux (Ubuntu)
   Status: Expired = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1318585

Title:
  NFSv3 exports not fully functional with older NFS clients

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Ubuntu 12.04.4 LTS
  Reproducible bug in nfs exports starting from 3.2.0-58
  Starting kernel version 3.2.0-58, it is impossible to checkout any subversion 
project on a NFSv3 mounted share on a Solaris 10 machine.
  svn co svn+ssh://svn.url/project
  returns the following
  svn: Can't read directory 'trunk': Value too large for defined data type
  Mounting the share with NFSv2 doesn't create this problem
  Possibly related to the following (excerpts from changelog):
* ext4: return 32/64-bit dir name hash according to usage type
  - LP: #1257010
* nfsd: vfs_llseek() with 32 or 64 bit offsets (hashes)
  - LP: #1257010

  
  Steps to reproduce:
  - On Ubuntu 12.04.4 installed both kernel versions 3.2.0-57 and 3.2.0-58
  - Boot with 3.2.0-57
  - Start nfs-kernel-server and export share
  - mount on Solaris 10 as NFSv3 (default)
  - login as share-authorized user on NFS share
  - create dir and checkout svn
  - ok
  - Reboot nfs server with kernel 3.2.0-58
  - unmount and mount share on Solaris machine
  - Try to svn co again, returns error svn: Can't read directory 'trunk': 
Value too large for defined data type

  It looks like 32bit NFS clients cannot handle 64 bit cookies relate to
  readdir and readdirplus, so this problem might not be exclusive to
  Solaris (this is the machine on which we could reproduce it)

  Thanks
  Alessandro

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: linux-image-3.2.0-58-generic 3.2.0-58.88
  ProcVersionSignature: Ubuntu 3.2.0-58.88-generic 3.2.53
  Uname: Linux 3.2.0-58-generic x86_64
  AlsaDevices:
   total 0
   crw-rw---T 1 root audio 116,  1 May 12 10:32 seq
   crw-rw---T 1 root audio 116, 33 May 12 10:32 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.0.1-0ubuntu17.6
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  CurrentDmesg:
   [5.157867] NFSD: starting 90-second grace period
   [   14.384064] eth0: no IPv6 routers present
  Date: Mon May 12 10:32:35 2014
  HibernationDevice: RESUME=UUID=3aefbfea-8592-47d6-b423-5fa2dd796c71
  InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Release amd64 
(20120424.1)
  IwConfig:
   lono wireless extensions.
   
   eth1  no wireless extensions.
   
   eth0  no wireless extensions.
  Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize 
libusb: -99
  MachineType: VMware, Inc. VMware Virtual Platform
  MarkForUpload: True
  PciMultimedia:
   
  ProcEnviron:
   LANGUAGE=en_US:en
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-58-generic 
root=UUID=adc52d65-a826-4b8d-8525-65a714c6dd67 ro
  RelatedPackageVersions:
   linux-restricted-modules-3.2.0-58-generic N/A
   linux-backports-modules-3.2.0-58-generic  N/A
   linux-firmware1.79.12
  RfKill: Error: [Errno 2] No such file or directory
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/22/2012
  dmi.bios.vendor: Phoenix Technologies LTD
  dmi.bios.version: 6.00
  dmi.board.name: 440BX Desktop Reference Platform
  dmi.board.vendor: Intel Corporation
  dmi.board.version: None
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 1
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd06/22/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A:
  dmi.product.name: VMware Virtual Platform
  dmi.product.version: None
  dmi.sys.vendor: VMware, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1318585/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1420129] Re: [Apple Inc. MacBookPro11, 2] suspend/resume failure [non-free: wl]

The upstream kernel didn't solve the problem.

The 5min time out had exactly the same behavior. 
I was this time playing music while closing the lid. The music was never 
interrupted and the light never went out of the screen. The kernel knows the 
lid has been closed:
[   51.675694] systemd-logind[1376]: Lid closed.
[   91.193062] systemd-logind[1376]: Lid opened.

I noticed now, that clicking on Suspend doesn't work perfect (as I mistakenly 
wrote in the last post): 
it immediately wakes up / resumes (I will boot the ubuntu-kernel and test if it 
has the same behavior). 
This is also seen from the dmesg output:
[  238.968218] PM: Preparing system for mem sleep
[  238.968347] Freezing user space processes ... (elapsed 0.001 seconds) done.
[...]
[  239.456134] smpboot: CPU 6 is now offline
[  239.456413] intel_pstate CPU 7 exiting
[  239.456490] Broke affinity for irq 31
[  239.456492] Broke affinity for irq 34
[  239.457497] kvm: disabling virtualization on CPU7
[  239.457499] smpboot: CPU 7 is now offline
[  239.474888] ACPI: Low-level resume complete
[  239.474936] PM: Restoring platform NVS memory
[  239.475324] Enabling non-boot CPUs ...
[  239.475381] x86: Booting SMP configuration:
[  239.475382] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  239.495644] kvm: enabling virtualization on CPU1
[  239.536172] CPU1 is up
[  239.547781] smpboot: Booting Node 0 Processor 2 APIC 0x4


** Attachment added: dmesg.txt
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420129/+attachment/4323148/+files/dmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420129

Title:
  [Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I closed the lid of the laptop, put the laptop in its case/sleeve and went 
for an appointment. 2 hours later I took it out again and it was burning hot to 
the touch! The fans were also running on full speed, but that doesn't help much 
in the sleeve (luckily the laptop didn't die). 
  When I close the lid, it looks like the laptop hipernates, but apparently it 
doesn't. 
  Also it will not wake up again. I just get a black screen. It will very 
shortly (0.5sec) show the log in screen and then show a black screen again.
  If there is anything I can do, just let me know -I'm trying out 15.04 to help.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.18.0-12-generic 3.18.0-12.13
  ProcVersionSignature: Ubuntu 3.18.0-12.13-generic 3.18.4
  Uname: Linux 3.18.0-12-generic x86_64
  NonfreeKernelModules: wl
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.16-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mf 2205 F pulseaudio
   /dev/snd/controlC0:  mf 2205 F pulseaudio
  Date: Mon Feb  9 22:01:34 2015
  DuplicateSignature: suspend/resume:Apple Inc. 
MacBookPro11,2:MBP112.88Z.0138.B14.1501071031
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  InstallationDate: Installed on 2015-02-02 (7 days ago)
  InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150119)
  InterpreterPath: /usr/bin/python3.4
  MachineType: Apple Inc. MacBookPro11,2
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-12-generic.efi.signed 
root=UUID=2e543fc7-3cde-472f-a2ba-529d7e91ac90 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.18.0-12-generic N/A
   linux-backports-modules-3.18.0-12-generic  N/A
   linux-firmware 1.141
  SourcePackage: linux
  Title: [Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 01/07/2015
  dmi.bios.vendor: Apple Inc.
  dmi.bios.version: MBP112.88Z.0138.B14.1501071031
  dmi.board.asset.tag: Base Board Asset Tag#
  dmi.board.name: Mac-3CBD00234E554E41
  dmi.board.vendor: Apple Inc.
  dmi.board.version: MacBookPro11,2
  dmi.chassis.type: 10
  dmi.chassis.vendor: Apple Inc.
  dmi.chassis.version: Mac-3CBD00234E554E41
  dmi.modalias: 
dmi:bvnAppleInc.:bvrMBP112.88Z.0138.B14.1501071031:bd01/07/2015:svnAppleInc.:pnMacBookPro11,2:pvr1.0:rvnAppleInc.:rnMac-3CBD00234E554E41:rvrMacBookPro11,2:cvnAppleInc.:ct10:cvrMac-3CBD00234E554E41:
  dmi.product.name: MacBookPro11,2
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Inc.

To manage notifications about this bug go to:

[Kernel-packages] [Bug 1420129] Re: [Apple Inc. MacBookPro11, 2] suspend/resume failure [non-free: wl]

** Tags added: kernel-bug-exists-upstream

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420129

Title:
  [Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I closed the lid of the laptop, put the laptop in its case/sleeve and went 
for an appointment. 2 hours later I took it out again and it was burning hot to 
the touch! The fans were also running on full speed, but that doesn't help much 
in the sleeve (luckily the laptop didn't die). 
  When I close the lid, it looks like the laptop hipernates, but apparently it 
doesn't. 
  Also it will not wake up again. I just get a black screen. It will very 
shortly (0.5sec) show the log in screen and then show a black screen again.
  If there is anything I can do, just let me know -I'm trying out 15.04 to help.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.18.0-12-generic 3.18.0-12.13
  ProcVersionSignature: Ubuntu 3.18.0-12.13-generic 3.18.4
  Uname: Linux 3.18.0-12-generic x86_64
  NonfreeKernelModules: wl
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.16-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  mf 2205 F pulseaudio
   /dev/snd/controlC0:  mf 2205 F pulseaudio
  Date: Mon Feb  9 22:01:34 2015
  DuplicateSignature: suspend/resume:Apple Inc. 
MacBookPro11,2:MBP112.88Z.0138.B14.1501071031
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  InstallationDate: Installed on 2015-02-02 (7 days ago)
  InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150119)
  InterpreterPath: /usr/bin/python3.4
  MachineType: Apple Inc. MacBookPro11,2
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-12-generic.efi.signed 
root=UUID=2e543fc7-3cde-472f-a2ba-529d7e91ac90 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.18.0-12-generic N/A
   linux-backports-modules-3.18.0-12-generic  N/A
   linux-firmware 1.141
  SourcePackage: linux
  Title: [Apple Inc. MacBookPro11,2] suspend/resume failure [non-free: wl]
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 01/07/2015
  dmi.bios.vendor: Apple Inc.
  dmi.bios.version: MBP112.88Z.0138.B14.1501071031
  dmi.board.asset.tag: Base Board Asset Tag#
  dmi.board.name: Mac-3CBD00234E554E41
  dmi.board.vendor: Apple Inc.
  dmi.board.version: MacBookPro11,2
  dmi.chassis.type: 10
  dmi.chassis.vendor: Apple Inc.
  dmi.chassis.version: Mac-3CBD00234E554E41
  dmi.modalias: 
dmi:bvnAppleInc.:bvrMBP112.88Z.0138.B14.1501071031:bd01/07/2015:svnAppleInc.:pnMacBookPro11,2:pvr1.0:rvnAppleInc.:rnMac-3CBD00234E554E41:rvrMacBookPro11,2:cvnAppleInc.:ct10:cvrMac-3CBD00234E554E41:
  dmi.product.name: MacBookPro11,2
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420129/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1390764] Re: Display remains fully dimmed after resume from suspend

2015-02-20 Thread Christopher M. Penalver

Michael Steffens, could you please test the latest upstream kernel
available from the very top line at the top of the page (the release
names are irrelevant for testing, and please do not test the daily
folder) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will
allow additional upstream developers to examine the issue.

If the test did not allow you to test to the issue (ex. you couldn't boot into 
the OS) please make a comment in your report about this, and continue to test 
the next most recent kernel version until you can test to the issue. Once 
you've tested the upstream kernel, please comment on which kernel version 
specifically you tested. If this bug is fixed in the mainline kernel, please 
add the following tags by clicking on the yellow circle with a black pencil 
icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-3.XY-rcZ

Where XY and Z are numbers corresponding to the kernel version.

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-3.XY-rcZ

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results.

Thank you for your understanding.

** Tags removed: bios-outdated-f.20
** Tags added: latest-bios-f.20

** Changed in: linux (Ubuntu)
   Importance: Low = Medium

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1390764

Title:
  Display remains fully dimmed after resume from suspend

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  After resuming from suspend the display returns fully dimmed, and
  display brightness can't be adjusted, neither using FN keys, nor using
  KDE power management control. The issue occurs regardless whether the
  suspend state was activated by low battery, by closing the display, or
  by explicitly selecting sleep mode in KDE. Killing and restarting  X
  does not solve the problem. A reboot does.

  ---
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: michael 2554 
F pulseaudio michael 2784 F pulseaudio CRDA: Error: [Errno 2] No such 
file or directory
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=8dc81a6f-65e9-443d-b850-0f62a1ca52c4 
InstallationDate: Installed on 2012-05-13 (909 days ago)
  InstallationMedia: Kubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120424)
  MachineType: Hewlett-Packard HP EliteBook 8530w
  Package: linux (not installed)
  PccardctlStatus: Socket 0: 3.3V 16-bit PC Card Subdevice 0 (function 0) bound 
to driver pata_pcmcia
  ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) 
LANG=en_US.UTF-8 SHELL=/bin/bash
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-39-generic 
root=/dev/mapper/vg00-lv_root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon. 
  RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A 
linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.7
  Tags: trusty
  Uname: Linux 3.13.0-39-generic x86_64
  UpgradeStatus: Upgraded to trusty on 2014-05-10 (181 days ago)
  UserGroups: _MarkForUpload: True
  dmi.bios.date: 06/24/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68PDV Ver. F.0C
  dmi.board.name: 30E7
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 90.23
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68PDVVer.F.0C:bd06/24/2009:svnHewlett-Packard:pnHPEliteBook8530w:pvrF.0C:rvnHewlett-Packard:rn30E7:rvrKBCVersion90.23:cvnHewlett-Packard:ct10:cvr:
 
  dmi.product.name: HP EliteBook 8530w
  dmi.product.version: F.0C
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1390764/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1313296] [NEW] Screen won't fit the monitor resolution on my laptop

2015-02-20 Thread Launchpad Bug Tracker

You have been subscribed to a public bug:

After upgrading the linux kernel, the next boot X started with wrong
resolution, after looking around I think it could be related to the auto
i915.modeset=0 in the kernel args, but  I don't know how to get this
fixed. Moreover the xorg fallsback to vesa on init (I am not sure this
is the proper way to express that).

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: xorg (not installed)
ProcVersionSignature: Ubuntu 3.8.0-39.57~precise1-generic 3.8.13.20
Uname: Linux 3.8.0-39-generic i686
.tmp.unity.support.test.1:
 
ApportVersion: 2.0.1-0ubuntu17.6
Architecture: i386
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
Date: Sun Apr 27 11:46:45 2014
DistUpgraded: 2014-04-27 09:47:02,400 DEBUG enabling apt cron job
DistroCodename: precise
DistroVariant: ubuntu
DkmsStatus:
 virtualbox, 4.1.12, 3.8.0-38-generic, i686: installed
 virtualbox, 4.1.12, 3.8.0-39-generic, i686: installed
ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu
GraphicsCard:
 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) 
[8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
   Subsystem: Hewlett-Packard Company Device [103c:30d8]
   Subsystem: Hewlett-Packard Company Device [103c:30d8]
InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
MachineType: Hewlett-Packard HP Compaq 6720s
MarkForUpload: True
ProcEnviron:
 SHELL=/bin/bash
 TERM=xterm
 PATH=(custom, no user)
 LANG=es_ES.UTF-8
 LANGUAGE=es_ES:en
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-39-generic 
root=UUID=33a0c2f1-d3d3-4679-8cd9-c3b5ac1d2ce2 ro quiet splash nomodeset 
vt.handoff=7
SourcePackage: xorg
UpgradeStatus: Upgraded to precise on 2014-04-27 (0 days ago)
dmi.bios.date: 07/05/2007
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: 68MDU Ver. F.01
dmi.board.name: 30D8
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 83.0C
dmi.chassis.asset.tag: CNU746249V
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68MDUVer.F.01:bd07/05/2007:svnHewlett-Packard:pnHPCompaq6720s:pvrF.01:rvnHewlett-Packard:rn30D8:rvrKBCVersion83.0C:cvnHewlett-Packard:ct10:cvr:
dmi.product.name: HP Compaq 6720s
dmi.product.version: F.01
dmi.sys.vendor: Hewlett-Packard
version.compiz: compiz 1:0.9.7.12-0ubuntu3
version.libdrm2: libdrm2 2.4.46-1ubuntu0.0.0.1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.3~glasen~ppa1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.3~glasen~ppa1
version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.14
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1~precise~xup2
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.21.15~precise~ppa1.1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3~precise~xup2

** Affects: linux (Ubuntu)
 Importance: Low
 Status: Incomplete


** Tags: apport-bug bios-outdated-f.0d i386 precise regression-update ubuntu
-- 
Screen won't fit the monitor resolution on my laptop
https://bugs.launchpad.net/bugs/1313296
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1313296] Re: Screen won't fit the monitor resolution on my laptop

2015-02-20 Thread Christopher M. Penalver

Jdavid-1385, thank you for reporting this and helping make Ubuntu
better. 12.04.3 reached EOL in August 2014. For more on this, please see
https://wiki.ubuntu.com/Kernel/LTSEnablementStack and
https://wiki.ubuntu.com/Releases .

Is this an issue in a supported release?

** Tags added: bios-outdated-f.0d

** Package changed: xorg (Ubuntu) = linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Undecided = Low

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1313296

Title:
  Screen won't fit the monitor resolution on my laptop

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  After upgrading the linux kernel, the next boot X started with wrong
  resolution, after looking around I think it could be related to the
  auto i915.modeset=0 in the kernel args, but  I don't know how to get
  this fixed. Moreover the xorg fallsback to vesa on init (I am not sure
  this is the proper way to express that).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: xorg (not installed)
  ProcVersionSignature: Ubuntu 3.8.0-39.57~precise1-generic 3.8.13.20
  Uname: Linux 3.8.0-39-generic i686
  .tmp.unity.support.test.1:
   
  ApportVersion: 2.0.1-0ubuntu17.6
  Architecture: i386
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Sun Apr 27 11:46:45 2014
  DistUpgraded: 2014-04-27 09:47:02,400 DEBUG enabling apt cron job
  DistroCodename: precise
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.1.12, 3.8.0-38-generic, i686: installed
   virtualbox, 4.1.12, 3.8.0-39-generic, i686: installed
  ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu
  GraphicsCard:
   Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller 
(primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
 Subsystem: Hewlett-Packard Company Device [103c:30d8]
 Subsystem: Hewlett-Packard Company Device [103c:30d8]
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release i386 
(20130820.1)
  MachineType: Hewlett-Packard HP Compaq 6720s
  MarkForUpload: True
  ProcEnviron:
   SHELL=/bin/bash
   TERM=xterm
   PATH=(custom, no user)
   LANG=es_ES.UTF-8
   LANGUAGE=es_ES:en
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-39-generic 
root=UUID=33a0c2f1-d3d3-4679-8cd9-c3b5ac1d2ce2 ro quiet splash nomodeset 
vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to precise on 2014-04-27 (0 days ago)
  dmi.bios.date: 07/05/2007
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68MDU Ver. F.01
  dmi.board.name: 30D8
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 83.0C
  dmi.chassis.asset.tag: CNU746249V
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68MDUVer.F.01:bd07/05/2007:svnHewlett-Packard:pnHPCompaq6720s:pvrF.01:rvnHewlett-Packard:rn30D8:rvrKBCVersion83.0C:cvnHewlett-Packard:ct10:cvr:
  dmi.product.name: HP Compaq 6720s
  dmi.product.version: F.01
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.7.12-0ubuntu3
  version.libdrm2: libdrm2 2.4.46-1ubuntu0.0.0.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0.3~glasen~ppa1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0.3~glasen~ppa1
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.14
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1~precise~xup2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.21.15~precise~ppa1.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3~precise~xup2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1313296/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1421864] Re: CVE-2015-1593 Linux ASLR integer overflow

2015-02-20 Thread Achim Behrens

** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2015-1593

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-armadaxp in Ubuntu.
https://bugs.launchpad.net/bugs/1421864

Title:
  CVE-2015-1593 Linux ASLR integer overflow

Status in linux package in Ubuntu:
  Confirmed
Status in linux-armadaxp package in Ubuntu:
  Confirmed
Status in linux-ec2 package in Ubuntu:
  Confirmed
Status in linux-flo package in Ubuntu:
  Confirmed
Status in linux-fsl-imx51 package in Ubuntu:
  Confirmed
Status in linux-goldfish package in Ubuntu:
  Confirmed
Status in linux-lts-quantal package in Ubuntu:
  Confirmed
Status in linux-lts-raring package in Ubuntu:
  Confirmed
Status in linux-lts-saucy package in Ubuntu:
  Confirmed
Status in linux-lts-trusty package in Ubuntu:
  Confirmed
Status in linux-lts-utopic package in Ubuntu:
  Confirmed
Status in linux-mako package in Ubuntu:
  Confirmed
Status in linux-manta package in Ubuntu:
  Confirmed
Status in linux-mvl-dove package in Ubuntu:
  Confirmed
Status in linux-ti-omap4 package in Ubuntu:
  Confirmed

Bug description:
  Linux ASLR integer overflow

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1421864/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423917] [NEW] System hangs when screen closed

2015-02-20 Thread snurfle

Public bug reported:

If I close the screen on my laptop (Thinkpad W530) the system will freeze.
Nothing functions at all, including reisub.
However, the fn/space bar still turns the keyboard backlight on / off; that is 
working perfectly.
The volume / must buttons still toggle the 'mute' led on/off.
But the screen is frozen, the power button must be held for 5 seconds to power 
down the system.
There is noting in the logs to indicate anything at all happens after the 
system hangs, they just... stop.

After doing a hard boot, the system comes back up to grub, and then to a 
flashing white cursor on a black background.  I've left it at this screen for 
45 minutes, and it goes no further.
Doing another power-button force restart, it comes up to a dark gray cursor on 
a black background.
Doing a force restart from here will allow it to boot normally...  although, 
about 25% of the time when it boots 'normally', it will take me to a CLI login 
promt, and then after I log in, it will take me to a GUI login prompt.

When I am finally able to get it rebooted, there is nothing to be found
in the logs that indicate anything was logged at all when it was sitting
at the flashing cursors.

We have 25 W530 and W520 machines, they are all behaving the same way.

lsb_release -rd says 
Description:Ubuntu 14.04.2 LTS
Release:14.04

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-45-generic 3.13.0-45.74
ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13
Uname: Linux 3.13.0-45-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.7
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  greg   2120 F pulseaudio
 /dev/snd/controlC0:  greg   2120 F pulseaudio
CurrentDesktop: Unity
Date: Fri Feb 20 08:50:49 2015
HibernationDevice: RESUME=UUID=b1125bd3-92e0-466b-b0ef-d9980cf3cac2
InstallationDate: Installed on 2014-12-19 (62 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2)
MachineType: LENOVO 243852U
ProcFB:
 
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic 
root=UUID=ad92fac0-fc9d-418e-a38e-1c557b689333 ro quiet splash
RelatedPackageVersions:
 linux-restricted-modules-3.13.0-45-generic N/A
 linux-backports-modules-3.13.0-45-generic  N/A
 linux-firmware 1.127.11
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 08/22/2014
dmi.bios.vendor: LENOVO
dmi.bios.version: G5ETA0WW (2.60 )
dmi.board.asset.tag: Not Available
dmi.board.name: 243852U
dmi.board.vendor: LENOVO
dmi.board.version: Win8 Pro DPK TPG
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvrG5ETA0WW(2.60):bd08/22/2014:svnLENOVO:pn243852U:pvrThinkPadW530:rvnLENOVO:rn243852U:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 243852U
dmi.product.version: ThinkPad W530
dmi.sys.vendor: LENOVO

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug third-party-packages trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423917

Title:
  System hangs when screen closed

Status in linux package in Ubuntu:
  New

Bug description:
  If I close the screen on my laptop (Thinkpad W530) the system will freeze.
  Nothing functions at all, including reisub.
  However, the fn/space bar still turns the keyboard backlight on / off; that 
is working perfectly.
  The volume / must buttons still toggle the 'mute' led on/off.
  But the screen is frozen, the power button must be held for 5 seconds to 
power down the system.
  There is noting in the logs to indicate anything at all happens after the 
system hangs, they just... stop.

  After doing a hard boot, the system comes back up to grub, and then to a 
flashing white cursor on a black background.  I've left it at this screen for 
45 minutes, and it goes no further.
  Doing another power-button force restart, it comes up to a dark gray cursor 
on a black background.
  Doing a force restart from here will allow it to boot normally...  although, 
about 25% of the time when it boots 'normally', it will take me to a CLI login 
promt, and then after I log in, it will take me to a GUI login prompt.

  When I am finally able to get it rebooted, there is nothing to be
  found in the logs that indicate anything was logged at all when it was
  sitting at the flashing cursors.

  We have 25 W530 and W520 machines, they are all behaving the same way.

  lsb_release -rd says 
  Description:  Ubuntu 14.04.2 LTS
  Release:  14.04

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-45-generic 3.13.0-45.74
  ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13
  Uname: Linux

[Kernel-packages] [Bug 1423917] Status changed to Confirmed

2015-02-20 Thread Brad Figg

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423917

Title:
  System hangs when screen closed

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  If I close the screen on my laptop (Thinkpad W530) the system will freeze.
  Nothing functions at all, including reisub.
  However, the fn/space bar still turns the keyboard backlight on / off; that 
is working perfectly.
  The volume / must buttons still toggle the 'mute' led on/off.
  But the screen is frozen, the power button must be held for 5 seconds to 
power down the system.
  There is noting in the logs to indicate anything at all happens after the 
system hangs, they just... stop.

  After doing a hard boot, the system comes back up to grub, and then to a 
flashing white cursor on a black background.  I've left it at this screen for 
45 minutes, and it goes no further.
  Doing another power-button force restart, it comes up to a dark gray cursor 
on a black background.
  Doing a force restart from here will allow it to boot normally...  although, 
about 25% of the time when it boots 'normally', it will take me to a CLI login 
promt, and then after I log in, it will take me to a GUI login prompt.

  When I am finally able to get it rebooted, there is nothing to be
  found in the logs that indicate anything was logged at all when it was
  sitting at the flashing cursors.

  We have 25 W530 and W520 machines, they are all behaving the same way.

  lsb_release -rd says 
  Description:  Ubuntu 14.04.2 LTS
  Release:  14.04

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-45-generic 3.13.0-45.74
  ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13
  Uname: Linux 3.13.0-45-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  greg   2120 F pulseaudio
   /dev/snd/controlC0:  greg   2120 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Feb 20 08:50:49 2015
  HibernationDevice: RESUME=UUID=b1125bd3-92e0-466b-b0ef-d9980cf3cac2
  InstallationDate: Installed on 2014-12-19 (62 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  MachineType: LENOVO 243852U
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic 
root=UUID=ad92fac0-fc9d-418e-a38e-1c557b689333 ro quiet splash
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-45-generic N/A
   linux-backports-modules-3.13.0-45-generic  N/A
   linux-firmware 1.127.11
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/22/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G5ETA0WW (2.60 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 243852U
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG5ETA0WW(2.60):bd08/22/2014:svnLENOVO:pn243852U:pvrThinkPadW530:rvnLENOVO:rn243852U:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 243852U
  dmi.product.version: ThinkPad W530
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423917/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1410519] Re: [PowerVM] Kernel BUG @ kernel/irq_work.c:157! - 24x7 hw counters

Actually I see that you've verified with 3.18 kernels, can someone
verify with the 3.16 kernel as mentioned in comment #6? Thanks

** Tags removed: verification-done-utopic
** Tags added: verification-needed-utopic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1410519

Title:
  [PowerVM] Kernel BUG @ kernel/irq_work.c:157!  - 24x7 hw counters

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Utopic:
  Fix Committed

Bug description:
  [Impact]
  Using perf with hv_24x7 events can cause a kernel BUG.

  [Fix]
  The following upstream commits:
   d658972
   48bee8a
   f34b6c7
   ec2aef5

  [Test Case]
  Steps to recreate the problem:

  1.  Install Ubuntu 15.04 as a PowerVM guest.
  2.  Install perf tool
  3.  Run following scripts to test 24/7 Power8 hardware counter event with 
perf. tool

  ===  Script 1
  #!/bin/bash

  count=0;

  offset=0x128
  PERF_ARGS=-r 10 -C 0
  while [ $count -lt 100 ]; do

  EVENT=hv_24x7/domain=0x2,offset=$offset,starting_index=10/

  perf stat $PERF_ARGS -x ' ' perf stat $PERF_ARGS -x ' ' -e
  $EVENT ls

  count=)
  done

   Script 2
  #!/bin/bash

  offset=0;

  PERF_ARGS=-r 10 -C 0
  while [ $offset -lt 8192 ]; do

  EVENT=hv_24x7/domain=0x2,offset=$offset,starting_index=10/

  perf stat $PERF_ARGS -x ' ' perf stat $PERF_ARGS -x ' ' -e
  $EVENT ls

  offset=)
  done

  After few iterations I hit the following BUG.

  tt2.sh  tt.sh
  tt2.sh  tt.sh
  tt2.sh  tt.sh
  275679187521558  hv_24x7/domain=0x2,offset=6848,starting_index=10/ 0.00%
  tt2.sh  tt.sh
  [ 4657.314709] softirq: huh, entered softirq 7 SCHED c010abc0 with 
preem
  pt_count 0100, exited with bfff?
  [ 4657.314727] kernel BUG at /build/buildd/linux-3.16.0/kernel/irq_work.c:157!
  [ 4657.314732] Oops: Exception in kernel mode, sig: 5 [#1]
  [ 4657.314740] Modules linked in: rtc_generic pseries_rng
  [ 4657.314749] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-25-generic 
#33-U
  [ 4657.314755] task: c1375e00 ti: c13d task.ti: 
c13d
  [ 4657.314759] NIP: c01e8ffc LR: c001fe70 CTR: 
c0002800ic)
  [ 4657.314770] MSR: 80029033 SF,EE,ME,IR,DR,RI,LE  CR: 28042024  
XER: 000a
  [ 4657.314782] CFAR: c001fe6c SOFTE: 0
  GPR04: 0010 009c c1424a98 0002
  GPR12: 80009033 ce9a 06a3fcd0 0060
  GPR16: 0020  c0e57c00 
  GPR20: c1595dca c1595478 0001 
  GPR28: c0e40380 c0e40300 c13d3590 c0e56f08
  [ 4657.314832] NIP [c01e8ffc] irq_work_run+0x1c/0x30
  [ 4657.314841] Call Trace:
  4000 (unreliable)
  [ 4657.314861] [c13d34f0] [c001ff90] timer_interrupt+0xa0/0xe0
  [ 4657.314871] [c13d3520] [c0002914] 
decrementer_common+0x114/0x180
  [ 4657.314884] --- Exception: 901 at arch_local_irq_restore+0x14/0x90
  [ 4657.314896] [c13d3810] [c012ed08] vprintk_emit+0x3b8/0x660 
(u
  [ 4657.314908] [c13d38e0] [c0a02650] printk+0x84/0x98
  [ 4657.314918] [c13d3910] [c00b51b4] __do_softirq+0x1e4/0x410
  [ 4657.314927] [c13d3a00] [c00b57b8] irq_exit+0xf8/0x1400
  [ 4657.314948] [c13d3a60] [c0002c14] 
doorbell_super_common+0x114/0x180
  [ 4657.314963] --- Exception: a01 at plpar_hcall_norets+0x8c/0xdc
  [ 4657.314963] LR = check_and_cede_processor+0x34/0x5020/0x50 (unreliable)
  [ 4657.314997] [c13d3df0] [c084077c] 
cpuidle_enter_state+0x6c/0x140c0
  [ 4657.315030] [c13d3f00] [c0d63ea8] start_kernel+0x500/0x51c
  [ 4657.315047] Instruction dump:
  [ 4657.315052] eba1ffe8 7c0803a6 ebc1fff0 ebe1fff8 4e800020 3c4c011f 3842c110 
78290464
  [ 4657.315068] 81290014 752a000f 7d380026 55291ffe 0b09 4bfffec8 
6000
  6000
  [ 4657.315090] ---[ end trace ee202cccd2211e5d ]---
  [ 4657.320224]
  [ 4657.362675] Unable to handle kernel paging request for data at address 
0xc000
  000b35515048
  [ 4657.362680] Faulting instruction address: 0xc006a37c
  [ 4657.362684] Oops: Kernel access of bad area, sig: 11 [#2]
  [ 4657.362686] SMP NR_CPUS=2048 NUMA pSeries
  [ 4657.362695] CPU: 12 PID: 7 Comm: rcu_sched Tainted: G  D   
3.16.0-25-
  [ 4657.362699] task: c000eb581540 ti: c000eb604000 task.ti: 
c000eb60
  [ 4657.362703] NIP: c006a37c LR: c00865a8 CTR: 
c006a340
  [ 4657.362706] REGS: c000eb607800 TRAP: 0300   Tainted: G  D
(3.16.0-25-generic)
  
  [ 4657.362718] CFAR: c00865a4 DAR: c00b35515048 DSISR: 4000 
SOFTE: 0
  GPR00: c00865a8 c000eb607a80 c13d50f0 013d30d0
  GPR08:

[Kernel-packages] [Bug 1418286] Re: kernel BUG at /build/buildd/linux-3.18.0/mm/slub.c:3334!

2015-02-20 Thread Luis Henriques

Awesome, thanks for testing.  The kernel currently in -proposed is
3.18.0-14.15 and it's likely the last 3.18 kernel for Vivid -- the next
one should already be a 3.19 kernel.  Since 3.19 kernel already contains
the fix for this bug, I don't think there's a need to actually SRU the
fix as it will not actually be uploaded.

I'm changing the bug status to 'Triagged'; feel free to change it to
'Fix released' once you get a 3.19 kernel.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Triaged

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1418286

Title:
  kernel BUG at /build/buildd/linux-3.18.0/mm/slub.c:3334!

Status in linux package in Ubuntu:
  Triaged

Bug description:
  This is a fresh install. On the first boot, I did an `apt-get update
   apt-get dist-upgrade, then this error has been showing up on every
  boot since.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.18.0-12-generic 3.18.0-12.13
  ProcVersionSignature: Ubuntu 3.18.0-12.13-generic 3.18.4
  Uname: Linux 3.18.0-12-generic x86_64
  Annotation: Your system might become unstablenow and might need to be 
restarted.
  ApportVersion: 2.15.1-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  vader  2429 F pulseaudio
   /dev/snd/controlC1:  vader  2429 F pulseaudio
  Date: Wed Feb  4 18:34:37 2015
  Failure: oops
  HibernationDevice: RESUME=UUID=11449e64-6ee6-4d54-b336-bce8608c56c9
  InstallationDate: Installed on 2015-02-04 (0 days ago)
  InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Alpha amd64 (20141218)
  MachineType: ASUSTeK COMPUTER INC. Q501LA
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-12-generic 
root=UUID=3f2d8fd8-7c79-4d11-ae2d-b0cd1b27db9c ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8
  SourcePackage: linux
  Title: kernel BUG at /build/buildd/linux-3.18.0/mm/slub.c:3334!
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 06/19/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: Q501LA.207
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: Q501LA
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrQ501LA.207:bd06/19/2013:svnASUSTeKCOMPUTERINC.:pnQ501LA:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnQ501LA:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: Q501LA
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1418286/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1403152] Re: unregister_netdevice: waiting for lo to become free. Usage count

** Changed in: linux (Ubuntu)
 Assignee: Chris J Arges (arges) = Stefan Bader (smb)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1403152

Title:
  unregister_netdevice: waiting for lo to become free. Usage count

Status in The Linux Kernel:
  Unknown
Status in linux package in Ubuntu:
  Triaged
Status in linux source package in Trusty:
  Confirmed
Status in linux source package in Utopic:
  Confirmed

Bug description:
  I currently running trusty latest patches and i get on these hardware
  and software:

  Ubuntu 3.13.0-43.72-generic 3.13.11.11

  processor : 7
  vendor_id : GenuineIntel
  cpu family: 6
  model : 77
  model name: Intel(R) Atom(TM) CPU  C2758  @ 2.40GHz
  stepping  : 8
  microcode : 0x11d
  cpu MHz   : 2400.000
  cache size: 1024 KB
  physical id   : 0
  siblings  : 8
  core id   : 7
  cpu cores : 8
  apicid: 14
  initial apicid: 14
  fpu   : yes
  fpu_exception : yes
  cpuid level   : 11
  wp: yes
  flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov 
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm 
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc 
aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm 
sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch 
arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
  bogomips  : 4799.48
  clflush size  : 64
  cache_alignment   : 64
  address sizes : 36 bits physical, 48 bits virtual
  power management:

  somehow reproducable the subjected error, and lxc is working still but
  not more managable until a reboot.

  managable means every command hangs.

  I saw there are alot of bugs but they seams to relate to older version
  and are closed, so i decided to file a new one?

  I run alot of machine with trusty an lxc containers but only these kind of 
machines produces these errors, all
  other don't show these odd behavior.

  thx in advance

  meno

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1403152/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1421391] Re: can't kdump in trusty ec2 instance

** Changed in: linux (Ubuntu)
 Assignee: Chris J Arges (arges) = Stefan Bader (smb)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1421391

Title:
  can't kdump in trusty ec2 instance

Status in linux package in Ubuntu:
  Incomplete

Bug description:

  [Impact]

  I can't get a crash dump in an ec2 trusty instance. When it kexecs, I
  see the following backtrace:

  [0.813826] [ cut here ]
  [0.817517] WARNING: CPU: 0 PID: 1 at 
/build/buildd/linux-3.13.0/arch/x86/mm/ioremap.c:102 
__ioremap_caller+0x374/0x380()
  [0.823494] Modules linked in:
  [0.825807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-44-generic 
#73-Ubuntu
  [0.829917] Hardware name: Xen HVM domU, BIOS 4.2.amazon 12/03/2014
  [0.833266]  0009 8800362f1c18 81720d86 

  [0.838861]  8800362f1c50 810677cd eaff0640 
0003fc19
  [0.844463]  3fc19000 0003fc19 1000 
8800362f1c60
  [0.850005] Call Trace:
  [0.851708]  [81720d86] dump_stack+0x45/0x56
  [0.854563]  [810677cd] warn_slowpath_common+0x7d/0xa0
  [0.857735]  [810678aa] warn_slowpath_null+0x1a/0x20
  [0.860855]  [81056ba4] __ioremap_caller+0x374/0x380
  [0.864047]  [8104b528] ? copy_oldmem_page+0x48/0xc0
  [0.867193]  [81056be4] ioremap_cache+0x14/0x20
  [0.870123]  [8104b528] copy_oldmem_page+0x48/0xc0
  [0.873223]  [81231fd4] read_from_oldmem.part.0+0xa4/0xe0
  [0.876534]  [8123222b] elfcorehdr_read_notes+0x1b/0x20
  [0.879797]  [81d66809] 
merge_note_headers_elf64.constprop.7+0x71/0x24a
  [0.883949]  [81d67188] ? vmcore_init.part.4+0x55d/0x55d
  [0.887380]  [81d66dbd] vmcore_init.part.4+0x192/0x55d
  [0.890670]  [81d67188] ? vmcore_init.part.4+0x55d/0x55d
  [0.894075]  [81d671b9] vmcore_init+0x31/0x33
  [0.897022]  [8100214a] do_one_initcall+0xfa/0x1b0
  [0.900121]  [81089555] ? parse_args+0x225/0x3f0
  [0.903231]  [81d360f6] kernel_init_freeable+0x17b/0x200
  [0.906683]  [81d358e5] ? do_early_param+0x88/0x88
  [0.909814]  [8170f250] ? rest_init+0x80/0x80
  [0.912777]  [8170f25e] kernel_init+0xe/0x130
  [0.915648]  [817317bc] ret_from_fork+0x7c/0xb0
  [0.918684]  [8170f250] ? rest_init+0x80/0x80
  [0.921565] ---[ end trace 8b6e218b41648bbd ]---

  [ Test Case ]

  boot ec2 trusty instance
  sudo apt-get install linux-crashdump
  sudo sed -i 's/USE_KDUMP=0/USE_KDUMP=1/' /etc/default/kdump-tools
  sudo reboot
  sudo kdump-config show
  echo c | sudo tee /proc/sysrq-trigger

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1421391/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423483] Re: Kdump over network(nfs) does not work

2015-02-20 Thread Louis Bouchard

** Changed in: makedumpfile (Ubuntu)
   Status: New = Triaged

** Changed in: makedumpfile (Ubuntu)
   Importance: Undecided = Low

** Changed in: makedumpfile (Ubuntu)
 Assignee: (unassigned) = Louis Bouchard (louis-bouchard)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to makedumpfile in Ubuntu.
https://bugs.launchpad.net/bugs/1423483

Title:
  Kdump over network(nfs) does not work

Status in makedumpfile package in Ubuntu:
  Triaged

Bug description:
  Problem Description
  ==
  Kdump over network(nfs) does not work
   
  ---uname output---
  3.18.0-13-generic
   
  Machine Type = POWER8 
   
  System Hang
  =
   The dump process seems to take a lot of time and it takes forever to save 
the dump. I waited for almost 3 hours, but the dump did not complete.
   
  Steps to Reproduce
  ===
  1) Configure kdump over nfs
  Add the following line to /etc/default/kdump-tools

  NFS=9.3.189.84:/nfsshare

  2) Load  kdump

  root@lop824:~# kdump-config load
  Modified cmdline:BOOT_IMAGE=/boot/vmlinux-3.18.0-13-generic 
root=UUID=234c5426-796e-4f54-bd77-7b0fe10e0407 ro splash irqpoll maxcpus=1 
nousb systemd.unit=kdump-tools.service elfcorehdr=155072K 
  segment[0].mem:0x800 memsz:24510464
  segment[1].mem:0x976 memsz:65536
  segment[2].mem:0x977 memsz:65536
  segment[3].mem:0x978 memsz:65536
  segment[4].mem:0x979 memsz:21954560
  segment[5].mem:0xec7 memsz:196608
   * loaded kdump kernel

  3) Trigger a dump. Kdump boot and starts copying the dump but hangs
  midway.

  root@lop824:~# ls -lh /nfsmount/9.114.13.128-201502170326/
  total 1.3M
  -rw--- 1 nobody nogroup 27M Feb 17 03:27 dump-incomplete
  root@lop824:~# 


  root@lop824:~# kdump-config show
  USE_KDUMP:1
  KDUMP_SYSCTL: kernel.panic_on_oops=1
  KDUMP_COREDIR:/var/crash
  crashkernel addr: 
  NFS:  9.3.189.84:/nfsshare
  HOSTTAG:  ip
  current state:ready to kdump

  kexec command:
/sbin/kexec -p --args-linux 
--command-line=BOOT_IMAGE=/boot/vmlinux-3.18.0-13-generic 
root=UUID=234c5426-796e-4f54-bd77-7b0fe10e0407 ro splash irqpoll maxcpus=1 
nousb systemd.unit=kdump-tools.service 
--initrd=/boot/initrd.img-3.18.0-13-generic /boot/vmlinux-3.18.0-13-generic
  root@lop824:~#

  == Comment: #3 - SACHIN P. SANT ss...@in.ibm.com - 2015-02-17 07:17:14 ==
  Following messages are seen while saving a dump

  [   31.059522] NFS: Registering the id_resolver key type
  [   31.059542] Key type id_resolver registered
  [   31.059544] Key type id_legacy registered
  [   36.021996] nfs: server 9.3.189.84 not responding, timed out
  [   36.022026] nfs: server 9.3.189.84 not responding, timed out
  [   36.022049] nfs: server 9.3.189.84 not responding, timed out
  [   40.53] nfs: server 9.3.189.84 not responding, timed out
  [   40.530033] nfs: server 9.3.189.84 not responding, timed out
  [   45.037994] nfs: server 9.3.189.84 not responding, timed out
  [   45.038020] nfs: server 9.3.189.84 not responding, timed out
  [   48.550133] nfs: server 9.3.189.84 not responding, timed out
  [   48.550161] nfs: server 9.3.189.84 not responding, timed out
  [   51.557995] nfs: server 9.3.189.84 not responding, timed out
  [   51.558021] nfs: server 9.3.189.84 not responding, timed out
  [   55.617018] nfs: server 9.3.189.84 not responding, timed out
  [   55.617050] nfs: server 9.3.189.84 not responding, timed out
  [   58.621419] nfs: server 9.3.189.84 not responding, timed out
  [   58.621447] nfs: server 9.3.189.84 not responding, timed out
  [   58.621470] nfs: server 9.3.189.84 not responding, timed out
  [   61.413753] BUG: arch topology borken
  [   61.413757]  the DIE domain not a subset of the NUMA domain
  [   61.413760] BUG: arch topology borken
  [   61.413762]  the DIE domain not a subset of the NUMA domain
  [   61.413765] BUG: arch topology borken
  [   61.413766]  the DIE domain not a subset of the NUMA domain
  [   61.413769] BUG: arch topology borken
  [   61.413770]  the DIE domain not a subset of the NUMA domain
  [   61.413773] BUG: arch topology borken
  [   61.413774]  the DIE domain not a subset of the NUMA domain
  [   61.413777] BUG: arch topology borken
  [   61.413778]  the DIE domain not a subset of the NUMA domain
  [   61.413781] BUG: arch topology borken
  [   61.413782]  the DIE domain not a subset of the NUMA domain
  [   61.413785] BUG: arch topology borken
  [   61.413786]  the DIE domain not a subset of the NUMA domain
  [   61.625436] nfs: server 9.3.189.84 not responding, timed out
  [   66.133424] nfs: server 9.3.189.84 not responding, timed out
  [   66.133453] nfs: server 9.3.189.84 not responding, timed out
  [   70.641436] nfs: server 9.3.189.84 not responding, timed out
  [   70.641465] nfs: server 9.3.189.84 not responding, timed out
  [   74.149421] nfs: server 9.3.189.84 not

[Kernel-packages] [Bug 1423483] Re: Kdump over network(nfs) does not work

2015-02-20 Thread Louis Bouchard

Hello,

First of all, the problem at hand is not that the mechanism doesn't
work, it is the fact that NFS file transfer takes too long.  From what I
see, the NFS mechanism has worked at least partly.

The NFS was correctly mounted and the coredump transfer was initiated.
For some reason, the NFS service started to timeout, but kdump-tools
doesn't have much to do with it.

One thing did get my attention.  The mount command that you issued
returns the following (edited for clarity ):

# mount
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,nodev,noexec,nosuid)
...
9.3.189.84:/nfsshare on /nfsmount type nfs 
(rw,vers=4,addr=9.3.189.84,clientaddr=9.114.13.128)

The NFS mount on /var/crash is not appearing which is definitively a
problem as this is done at a very early stage of the process.  And it
was mounted at the beginning since there is a vmcore-incomplete file on
the remote NFS server.

I don't have any context on the size of the file to be transfered and
maybe it did bring the kexec booted kernel to memory exhaustion but
there is no sign of OOM which is to be expected in these situations.

Right now, with the data at hand, I cannot put forward anything else
than an lack of availability of the NFS server that caused the failure.

** Tags added: cts

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to makedumpfile in Ubuntu.
https://bugs.launchpad.net/bugs/1423483

Title:
  Kdump over network(nfs) does not work

Status in makedumpfile package in Ubuntu:
  Triaged

Bug description:
  Problem Description
  ==
  Kdump over network(nfs) does not work
   
  ---uname output---
  3.18.0-13-generic
   
  Machine Type = POWER8 
   
  System Hang
  =
   The dump process seems to take a lot of time and it takes forever to save 
the dump. I waited for almost 3 hours, but the dump did not complete.
   
  Steps to Reproduce
  ===
  1) Configure kdump over nfs
  Add the following line to /etc/default/kdump-tools

  NFS=9.3.189.84:/nfsshare

  2) Load  kdump

  root@lop824:~# kdump-config load
  Modified cmdline:BOOT_IMAGE=/boot/vmlinux-3.18.0-13-generic 
root=UUID=234c5426-796e-4f54-bd77-7b0fe10e0407 ro splash irqpoll maxcpus=1 
nousb systemd.unit=kdump-tools.service elfcorehdr=155072K 
  segment[0].mem:0x800 memsz:24510464
  segment[1].mem:0x976 memsz:65536
  segment[2].mem:0x977 memsz:65536
  segment[3].mem:0x978 memsz:65536
  segment[4].mem:0x979 memsz:21954560
  segment[5].mem:0xec7 memsz:196608
   * loaded kdump kernel

  3) Trigger a dump. Kdump boot and starts copying the dump but hangs
  midway.

  root@lop824:~# ls -lh /nfsmount/9.114.13.128-201502170326/
  total 1.3M
  -rw--- 1 nobody nogroup 27M Feb 17 03:27 dump-incomplete
  root@lop824:~# 


  root@lop824:~# kdump-config show
  USE_KDUMP:1
  KDUMP_SYSCTL: kernel.panic_on_oops=1
  KDUMP_COREDIR:/var/crash
  crashkernel addr: 
  NFS:  9.3.189.84:/nfsshare
  HOSTTAG:  ip
  current state:ready to kdump

  kexec command:
/sbin/kexec -p --args-linux 
--command-line=BOOT_IMAGE=/boot/vmlinux-3.18.0-13-generic 
root=UUID=234c5426-796e-4f54-bd77-7b0fe10e0407 ro splash irqpoll maxcpus=1 
nousb systemd.unit=kdump-tools.service 
--initrd=/boot/initrd.img-3.18.0-13-generic /boot/vmlinux-3.18.0-13-generic
  root@lop824:~#

  == Comment: #3 - SACHIN P. SANT ss...@in.ibm.com - 2015-02-17 07:17:14 ==
  Following messages are seen while saving a dump

  [   31.059522] NFS: Registering the id_resolver key type
  [   31.059542] Key type id_resolver registered
  [   31.059544] Key type id_legacy registered
  [   36.021996] nfs: server 9.3.189.84 not responding, timed out
  [   36.022026] nfs: server 9.3.189.84 not responding, timed out
  [   36.022049] nfs: server 9.3.189.84 not responding, timed out
  [   40.53] nfs: server 9.3.189.84 not responding, timed out
  [   40.530033] nfs: server 9.3.189.84 not responding, timed out
  [   45.037994] nfs: server 9.3.189.84 not responding, timed out
  [   45.038020] nfs: server 9.3.189.84 not responding, timed out
  [   48.550133] nfs: server 9.3.189.84 not responding, timed out
  [   48.550161] nfs: server 9.3.189.84 not responding, timed out
  [   51.557995] nfs: server 9.3.189.84 not responding, timed out
  [   51.558021] nfs: server 9.3.189.84 not responding, timed out
  [   55.617018] nfs: server 9.3.189.84 not responding, timed out
  [   55.617050] nfs: server 9.3.189.84 not responding, timed out
  [   58.621419] nfs: server 9.3.189.84 not responding, timed out
  [   58.621447] nfs: server 9.3.189.84 not responding, timed out
  [   58.621470] nfs: server 9.3.189.84 not responding, timed out
  [   61.413753] BUG: arch topology borken
  [   61.413757]  the DIE domain not a subset of the NUMA domain
  [   61.413760] BUG: arch topology borken
  [   61.413762]  the DIE domain not a subset of the

[Kernel-packages] [Bug 1424088] Re: No resume on ThinkPad Helix -- system keeps sleeping

2015-02-20 Thread Dean Stanton

Adding additional logs.

** Attachment added: pm-suspend.log

https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1424088/+attachment/4323654/+files/pm-suspend.log

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1424088

Title:
No resume on ThinkPad Helix -- system keeps sleeping

Status in linux-lts-utopic package in Ubuntu:
New

Bug description:
Lenovo ThinkPad Helix is a Convertable Ultrabook with an Intel
Core-M (Broadwell) processor. The tablet can come off the dock-with-
keyboard and latch to it as a cover.

Attempting a suspend is apparently successful. The LED (on the back of
the tablet pulsates).

But neither attaching the tablet in its open position nor pressing the
power button will wake the system to resume. The LED continues to
pulsate and the system continues to be unreachable by Ethernet.

As a workaround I can suspend with pm-suspend-hybrid and then when
it does not resume I can force power off and turn it back on. This
causes it to thaw.

None of the pm-action quirk options helped.

Description: Ubuntu 14.04.2 LTS
Release: 14.04
I have also tried Ubuntu 14.10.1 and it also has this issue.

The kernel message insists that I attach /sys/class/drm/card0/error
but that file is empty.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1 [modified:
boot/vmlinuz-3.16.0-30-generic]
ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
Uname: Linux 3.16.0-30-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.7
Architecture: amd64
CurrentDesktop: Unity
Date: Fri Feb 20 14:08:57 2015
InstallationDate: Installed on 2015-02-20 (0 days ago)
InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64
(20150218.1)
SourcePackage: linux-lts-utopic
UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1424088/+subscriptions

[Kernel-packages] [Bug 1377878] Re: PPC - GUI freezes except for mouse pointer

2015-02-20 Thread Israel Dahl

I experienced this bug as well.  I did not run ubiquity, I ran firefox and it 
froze after a few moments.  The screen is frozen, and the mouse cursor is stuck 
with the same cursor.
This was done using:
 Lubuntu 14.04.2 (testing)
On a:
 powerbook4_3 (iBook 2 rev. 2)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1377878

Title:
  PPC - GUI freezes except for mouse pointer

Status in The Linux Kernel:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  During the installation the computer freezes completely except for the
  mouse pointer.  And even that is stuck with whatever shape it happened
  to have at the time it froze.  The steps I have to cause the freeze
  are run Ubiquity to start the installation open a terminal, run
  Ubuntu-bug and let it launch Firefox.  It will freeze every time then.
  Even the consoles (ctrl-alt-f1 etc) are unavailable.  What kind of
  information can I collect and how?

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1377878/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 898003] Re: usbip source is maintained in kernel tree now

2015-02-20 Thread Nicholas Skaggs

For those users wanting a solution:

Uninstall usbip package if you've installed it.

On trusty, install linux-tools-generic-lts-utopic. I can't seem to find
a package that will create a binary, but you can run the binary manually
from /usr/lib/linux-tools/. As of this writing it's /usr/lib/linux-
tools/3.16.0-23-generic/usbip. NOTE, I am running the HWE utopic kernel
on my trusty box.

On utopic or vivid install linux-tools-generic. usbip is registered as a
binary in this case, you can use directly with 'usbip'.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/898003

Title:
  usbip source is maintained in kernel tree now

Status in linux package in Ubuntu:
  Fix Released
Status in usbip package in Ubuntu:
  Confirmed
Status in linux source package in Utopic:
  Fix Released
Status in usbip source package in Utopic:
  Confirmed

Bug description:
  Both the userspace and kernel module parts of usbip are in the linux
  kernel tree now.  The source used in this package is quite old.

  I'm not sure how to best handle the packaging aspects here -- I
  imagine that it would be undesirable for usbip to be built as a side
  effect of the main kernel package build, because then the kernel
  package build would be even slower and usbip is probably not updated
  enough to justify that.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/898003/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1402957] Re: kernel panic on bootup exit code: 0x000000b0 - now I can`t boot

** Changed in: linux (Ubuntu)
   Importance: Medium = High

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1402957

Title:
  kernel panic on bootup exit code: 0x00b0 - now I can`t boot

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  after upgrade to ubuntu 14.10 on the first bootup I have always
  Kernel panic - not syncing: Attempted to kill init! exit code
  0x00b0 (I`m not sure for the exit code)

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: ubuntu-release-upgrader-core 1:14.10.9
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CrashDB: ubuntu
  Date: Tue Dec 16 09:19:33 2014
  InstallationDate: Installed on 2012-12-06 (739 days ago)
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  PackageArchitecture: all
  SourcePackage: ubuntu-release-upgrader
  Symptom: release-upgrade
  UpgradeStatus: Upgraded to utopic on 2014-12-09 (6 days ago)
  --- 
  ApportVersion: 2.12.5-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  ubuntu 2942 F pulseaudio
   /dev/snd/controlC0:  ubuntu 2942 F pulseaudio
  CasperVersion: 1.336ubuntu1
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)
  MachineType: ASUSTeK COMPUTER INC. G75VW
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-12-generic N/A
   linux-backports-modules-3.11.0-12-generic  N/A
   linux-firmware 1.116
  Tags:  saucy
  Uname: Linux 3.11.0-12-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 10/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: G75VW.221
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: G75VW
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrG75VW.221:bd10/23/2012:svnASUSTeKCOMPUTERINC.:pnG75VW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnG75VW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: G75VW
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1402957/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1305335] Re: Cutting or copying files on btrfs to ecryptfs results in data loss

2015-02-20 Thread whoop

I still have a running system with this issue. 
It is not an ubuntu box but Arch 64. This is a fresh install. 

I stole the disk layout from the ubuntu documentation for this system:
one btrfs partition with @ subvolume for / and @home subvolume for /home. 
The system also uses a vfat ESP as it is an UEFI install.
Default kernel: currently 3.18.6-1-ARCH

I installed ecryptfs-utils (ecryptfs-utils 104-1) from the arch repo and did 
the following as configuration:
https://wiki.archlinux.org/index.php/ECryptfs#Without_ecryptfs-utils

The described setup above is currently working on an ext4 arch 64 bit
system but not on btrfs system...

A copy or move with nautilus to Private folder results in file(s) with 0 bytes 
(on all file formats I have tested).
A cp or mv to Private folder results in proper amount of bytes but something is 
also wrong as
thumbnails for jpg are not showing in Private folder with nautilus although 
thumbnails are enabled. So maybe header is getting corrupted or something.
I also tested avi and tga but these did give me thumbnails. I have not tested 
other file formats at this time.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1305335

Title:
  Cutting or copying files on btrfs to ecryptfs results in data loss

Status in eCryptfs:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  I've installed a fresh copy of 14.04 beta 2 on a brand-new SSD.  I
  used btrfs as the filesystem.

  I set up a Private folder usying ecryptfs-setup-private.

  I copied a few folders into the Private folder, and the entire
  directory structure and subfolders are copied, including the files
  themselves, yet every file contains 0 bytes.

  However, I can create and save new files in the Private directory.
  Also, folders and files can be correctly copied if I use the command line cp 
-R.

  Thanks,
  Damon

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: nautilus 1:3.10.1-0ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Apr  9 18:12:56 2014
  EcryptfsInUse: Yes
  GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' 
b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 
'permissions', 'mime_type', 'where']
  InstallationDate: Installed on 2014-04-05 (4 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ecryptfs/+bug/1305335/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1424088] [NEW] No resume on ThinkPad Helix -- system keeps sleeping

2015-02-20 Thread Dean Stanton

Public bug reported:

Lenovo ThinkPad Helix is a Convertable Ultrabook with an Intel Core-M
(Broadwell) processor. The tablet can come off the dock-with-keyboard
and latch to it as a cover.

Attempting a suspend is apparently successful. The LED (on the back of
the tablet pulsates).

But neither attaching the tablet in its open position nor pressing the
power button will wake the system to resume. The LED continues to
pulsate and the system continues to be unreachable by Ethernet.

As a workaround I can suspend with pm-suspend-hybrid and then when it
does not resume I can force power off and turn it back on. This causes
it to thaw.

None of the pm-action quirk options helped.

Description:Ubuntu 14.04.2 LTS
Release:14.04
I have also tried Ubuntu 14.10.1 and it also has this issue.

The kernel message insists that I attach /sys/class/drm/card0/error but
that file is empty.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1 [modified: 
boot/vmlinuz-3.16.0-30-generic]
ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
Uname: Linux 3.16.0-30-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.7
Architecture: amd64
CurrentDesktop: Unity
Date: Fri Feb 20 14:08:57 2015
InstallationDate: Installed on 2015-02-20 (0 days ago)
InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1)
SourcePackage: linux-lts-utopic
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: linux-lts-utopic (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug resume trusty

** Attachment added: suspend/resume crash file
   
https://bugs.launchpad.net/bugs/1424088/+attachment/4323646/+files/susres.2015-02-20_12%3A07%3A58.578026.crash

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1424088

Title:
  No resume on ThinkPad Helix -- system keeps sleeping

Status in linux-lts-utopic package in Ubuntu:
  New

Bug description:
  Lenovo ThinkPad Helix is a Convertable Ultrabook with an Intel
  Core-M (Broadwell) processor. The tablet can come off the dock-with-
  keyboard and latch to it as a cover.

  Attempting a suspend is apparently successful. The LED (on the back of
  the tablet pulsates).

  But neither attaching the tablet in its open position nor pressing the
  power button will wake the system to resume. The LED continues to
  pulsate and the system continues to be unreachable by Ethernet.

  As a workaround I can suspend with pm-suspend-hybrid and then when
  it does not resume I can force power off and turn it back on. This
  causes it to thaw.

  None of the pm-action quirk options helped.

  Description:  Ubuntu 14.04.2 LTS
  Release:  14.04
  I have also tried Ubuntu 14.10.1 and it also has this issue.

  The kernel message insists that I attach /sys/class/drm/card0/error
  but that file is empty.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1 [modified: 
boot/vmlinuz-3.16.0-30-generic]
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  Uname: Linux 3.16.0-30-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Fri Feb 20 14:08:57 2015
  InstallationDate: Installed on 2015-02-20 (0 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 
(20150218.1)
  SourcePackage: linux-lts-utopic
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1424088/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1424088] Re: No resume on ThinkPad Helix -- system keeps sleeping

2015-02-20 Thread Dean Stanton

** Attachment added: System log mentions [drm] GPU crash dump

https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1424088/+attachment/4323655/+files/syslog

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1424088

Title:
No resume on ThinkPad Helix -- system keeps sleeping

Status in linux-lts-utopic package in Ubuntu:
New

Bug description:
Lenovo ThinkPad Helix is a Convertable Ultrabook with an Intel
Core-M (Broadwell) processor. The tablet can come off the dock-with-
keyboard and latch to it as a cover.

Attempting a suspend is apparently successful. The LED (on the back of
the tablet pulsates).

As a workaround I can suspend with pm-suspend-hybrid and then when
it does not resume I can force power off and turn it back on. This
causes it to thaw.

None of the pm-action quirk options helped.

Description: Ubuntu 14.04.2 LTS
Release: 14.04
I have also tried Ubuntu 14.10.1 and it also has this issue.

The kernel message insists that I attach /sys/class/drm/card0/error
but that file is empty.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1424088/+subscriptions

[Kernel-packages] [Bug 1420627] Re: powerpc: backport AST graphic driver updates for OpenPower

** Also affects: linux (Ubuntu Utopic)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu Utopic)
   Status: New = Triaged

** Changed in: linux (Ubuntu)
   Status: Incomplete = Triaged

** Changed in: linux (Ubuntu Utopic)
   Importance: Undecided = Medium

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420627

Title:
  powerpc: backport AST graphic driver updates for OpenPower

Status in linux package in Ubuntu:
  Triaged
Status in linux source package in Utopic:
  Triaged

Bug description:
  The OpenPower machines such as the Tyan dev board use the ASpeed BMC which 
has a built
  in graphic controller. The driver for this doesn't work properly on PowerPC 
at the moment,
  this series of patches is a backport from upstream to fix that. It would be 
nice to have this
  in utopic kernel.

  Each patch in this archive is a cherry-pick and identifies the
  original upstream commit.

  All except patch 1 cherry-pick cleanly. Patch 1 needed some hand applying due 
to some
  unrelated changes that went upstream since 3.16 but the fixup is trivial.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420627/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1420290] Re: WARNING: CPU: 0 PID: 2517 at /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9713 intel_check_page_flip+0xe6/0xf0 [i915]()

** Tags added: kernel-bug-exists-upstream vivid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1420290

Title:
  WARNING: CPU: 0 PID: 2517 at
  /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9713
  intel_check_page_flip+0xe6/0xf0 [i915]()

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Running Vivid with kernel 3.19 (debs from http://kernel.ubuntu.com
  /~kernel-ppa/mainline/v3.19-vivid/), I get the warning below in dmesg.

  I can't use ubuntu-bug linux because I get It appears you are
  currently running a mainline kernel.  It would be better to report
  this bug upstream at http://bugzilla.kernel.org/ so that the upstream
  kernel developers are aware of the issue.  If you'd still like to file
  a bug against the Ubuntu kernel, please boot with an official Ubuntu
  kernel and re-file.. IMHO that last advice would be a DTO (Defeating
  The Objective), as this message does not appear in the 3.18.

  
  $ uname -a
  Linux superstreamer 3.19.0-031900-generic #201502091451 SMP Mon Feb 9 
14:52:52 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

  
  [ 2243.390997] [ cut here ]
  [ 2243.391046] WARNING: CPU: 0 PID: 2517 at 
/home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9713 
intel_check_page_flip+0xe6/0xf0 [i915]()
  [ 2243.391049] Kicking stuck page flip: queued at 134027, now 134031
  [ 2243.391051] Modules linked in: hid_generic(E) hp_wmi(E) sparse_keymap(E) 
joydev(E) rfcomm(E) bnep(E) intel_rapl(E) intel_soc_dts_thermal(E) 
intel_powerclamp(E) snd_hda_codec_hdmi(E) coretemp(E) kvm_intel(E) 
snd_hda_codec_realtek(E) kvm(E) snd_hda_codec_generic(E) crct10dif_pclmul(E) 
crc32_pclmul(E) ghash_clmulni_intel(E) cryptd(E) arc4(E) rtl8723be(E) 
btcoexist(E) snd_hda_intel(E) usbhid(E) rtl8723_common(E) snd_hda_controller(E) 
rtl_pci(E) serio_raw(E) rtlwifi(E) snd_hda_codec(E) snd_intel_sst_acpi(E) 
nls_iso8859_1(E) snd_hwdep(E) snd_intel_sst_core(E) 
snd_soc_sst_mfld_platform(E) mac80211(E) rtsx_pci_ms(E) snd_seq_midi(E) 
memstick(E) snd_soc_rt5640(E) snd_soc_rl6231(E) snd_seq_midi_event(E) 
cfg80211(E) lpc_ich(E) i915(E) snd_soc_core(E) snd_rawmidi(E) snd_compress(E) 
wmi(E) hp_wireless(E) snd_pcm_dmaengine(E)
  [ 2243.391089]  snd_seq(E) dw_dmac(E) dw_dmac_core(E) int3400_thermal(E) 
snd_seq_device(E) snd_pcm(E) int3403_thermal(E) processor_thermal_device(E) 
acpi_thermal_rel(E) intel_smartconnect(E) video(E) drm_kms_helper(E) drm(E) 
i2c_hid(E) snd_timer(E) hid(E) snd(E) i2c_designware_platform(E) soundcore(E) 
i2c_designware_core(E) i2c_algo_bit(E) shpchp(E) parport_pc(E) 
snd_soc_sst_acpi(E) btusb(E) mei_txe(E) mei(E) rfkill_gpio(E) iosf_mbi(E) 
ppdev(E) spi_pxa2xx_platform(E) bluetooth(E) 8250_dw(E) pwm_lpss_platform(E) 
pwm_lpss(E) lp(E) parport(E) mac_hid(E) mmc_block(E) rtsx_pci_sdmmc(E) 
psmouse(E) rtsx_pci(E) sdhci_acpi(E) sdhci(E)
  [ 2243.391129] CPU: 0 PID: 2517 Comm: Chrome_IOThread Tainted: GE 
 3.19.0-031900-generic #201502091451
  [ 2243.391131] Hardware name: Hewlett-Packard HP Stream Notebook PC 13/802A, 
BIOS F.05 11/28/2014
  [ 2243.391134]  25f1 880076c03630 817c4c00 
0007
  [ 2243.391138]  880076c03680 880076c03670 81076e87 
0748a8c1
  [ 2243.391142]  880036b91000 8800700909a8 880070090800 

  [ 2243.391146] Call Trace:
  [ 2243.391149]  IRQ  [817c4c00] dump_stack+0x45/0x57
  [ 2243.391162]  [81076e87] warn_slowpath_common+0x97/0xe0
  [ 2243.391166]  [81076f86] warn_slowpath_fmt+0x46/0x50
  [ 2243.391192]  [c04408a6] intel_check_page_flip+0xe6/0xf0 [i915]
  [ 2243.391214]  [c0405628] 
valleyview_pipestat_irq_handler+0x188/0x220 [i915]
  [ 2243.391236]  [c040bd2f] valleyview_irq_handler+0xaf/0x180 [i915]
  [ 2243.391242]  [8175d745] ? ip6_finish_output+0x95/0xd0
  [ 2243.391247]  [810ce4cd] handle_irq_event_percpu+0x5d/0x1e0
  [ 2243.391251]  [8175b18a] ? ip6_xmit+0x22a/0x490
  [ 2243.391255]  [810ce698] handle_irq_event+0x48/0x70
  [ 2243.391258]  [810d171f] handle_edge_irq+0x7f/0x120
  [ 2243.391263]  [810178a2] handle_irq+0x22/0x40
  [ 2243.391267]  [817d4e4c] do_IRQ+0x5c/0x110
  [ 2243.391271]  [817d2cad] common_interrupt+0x6d/0x6d
  [ 2243.391276]  [81703921] ? tcp_queue_rcv+0x21/0x130
  [ 2243.391280]  [816a7ac2] ? __skb_checksum_complete+0x22/0xd0
  [ 2243.391284]  [81708b54] tcp_rcv_established+0x194/0x740
  [ 2243.391289]  [81786126] tcp_v6_do_rcv+0x216/0x450
  [ 2243.391294]  [81312226] ? security_sock_rcv_skb+0x16/0x20
  [ 2243.391298]  [817872c6] tcp_v6_rcv+0x796/0x7e0
  [ 2243.391304]  [c073523f] ? _rtl_pci_rx_interrupt+0x4af/0x680 
[rtl_pci]
  [ 2243.391309]  [8175da20] ip6_input_finish+0x140/0x420
  [ 2243.391313]  [8175e202]

[Kernel-packages] [Bug 1424058] Status changed to Confirmed

2015-02-20 Thread Brad Figg

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1424058

Title:
  NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  This appears to be part of a superbug set [all variants] that inlcudes
  nouveau-firmware and the new kernels.  Rebooting from live or hard
  install will  shutdown and lock PC and KVM hardware. Also workspace
  switcher will not function properly in live mode.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.18.0-13-generic 3.18.0-13.14 [modified: 
boot/vmlinuz-3.18.0-13-generic]
  ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5
  Uname: Linux 3.18.0-13-generic x86_64
  Annotation: Your system might become unstablenow and might need to be 
restarted.
  ApportVersion: 2.16.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ventrical   1986 F pulseaudio
  Date: Fri Feb 20 11:22:29 2015
  Failure: oops
  HibernationDevice: RESUME=UUID=ce424a7c-5513-403b-9787-65385e1bb31a
  InstallationDate: Installed on 2015-02-20 (0 days ago)
  InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150219)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: System manufacturer System Product Name
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-13-generic 
root=UUID=a84a80c3-21c2-4782-96df-c49d1e9115f1 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8
  RfKill:
   
  SourcePackage: linux
  Title: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/15/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1807
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5B-E
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1807:bd04/15/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5B-E:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1424058/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1424087] [NEW] Ubuntu 14.04.2 LTS [drm:i915_stolen_to_physical] ERROR conflict detected with stolen region

2015-02-20 Thread Erkan ÜNLÜTÜRK

Public bug reported:

display driver, intel g41 express chipset. Thanks

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1 [modified: 
boot/vmlinuz-3.16.0-30-generic]
ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
Uname: Linux 3.16.0-30-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.7
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Feb 21 00:34:43 2015
InstallationDate: Installed on 2015-02-20 (0 days ago)
InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1)
SourcePackage: linux-lts-utopic
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: linux-lts-utopic (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug third-party-packages trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-utopic in Ubuntu.
https://bugs.launchpad.net/bugs/1424087

Title:
  Ubuntu 14.04.2 LTS [drm:i915_stolen_to_physical] *ERROR* conflict
  detected with stolen region

Status in linux-lts-utopic package in Ubuntu:
  New

Bug description:
  display driver, intel g41 express chipset. Thanks

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-30-generic 3.16.0-30.40~14.04.1 [modified: 
boot/vmlinuz-3.16.0-30-generic]
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  Uname: Linux 3.16.0-30-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sat Feb 21 00:34:43 2015
  InstallationDate: Installed on 2015-02-20 (0 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 
(20150218.1)
  SourcePackage: linux-lts-utopic
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1424087/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1424058] Re: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]

Did this issue start happening after an update/upgrade? Was there a
prior kernel version where you were not having this particular problem?

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.19 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot,
please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as
Confirmed.

Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/

** Changed in: linux (Ubuntu)
Importance: Undecided = Medium

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1424058

Title:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]

Status in linux package in Ubuntu:
Confirmed

Bug description:
This appears to be part of a superbug set [all variants] that inlcudes
nouveau-firmware and the new kernels. Rebooting from live or hard
install will shutdown and lock PC and KVM hardware. Also workspace
switcher will not function properly in live mode.

ProblemType: KernelOops
DistroRelease: Ubuntu 15.04
Package: linux-image-3.18.0-13-generic 3.18.0-13.14 [modified:
boot/vmlinuz-3.18.0-13-generic]
ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5
Uname: Linux 3.18.0-13-generic x86_64
Annotation: Your system might become unstablenow and might need to be
restarted.
ApportVersion: 2.16.1-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: ventrical 1986 F pulseaudio
Date: Fri Feb 20 11:22:29 2015
Failure: oops
HibernationDevice: RESUME=UUID=ce424a7c-5513-403b-9787-65385e1bb31a
InstallationDate: Installed on 2015-02-20 (0 days ago)
InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150219)
IwConfig:
eth0 no wireless extensions.

lono wireless extensions.
MachineType: System manufacturer System Product Name
ProcFB: 0 nouveaufb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-13-generic
root=UUID=a84a80c3-21c2-4782-96df-c49d1e9115f1 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8
RfKill:

SourcePackage: linux
Title: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/15/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1807
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P5B-E
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr1807:bd04/15/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5B-E:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1424058/+subscriptions

[Kernel-packages] [Bug 1352821] Re: 0489:e078 - Qualcom Atheros - Ubuntu 14.04 bluetooth not working

** Also affects: linux (Ubuntu Utopic)
   Importance: Undecided
   Status: New

** Also affects: linux (Ubuntu Trusty)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu Trusty)
   Status: New = Triaged

** Changed in: linux (Ubuntu Utopic)
   Status: New = Triaged

** Changed in: linux (Ubuntu Trusty)
   Importance: Undecided = Medium

** Changed in: linux (Ubuntu Utopic)
   Importance: Undecided = Medium

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1352821

Title:
  0489:e078 - Qualcom Atheros - Ubuntu 14.04 bluetooth not working

Status in linux package in Ubuntu:
  Triaged
Status in linux source package in Trusty:
  Triaged
Status in linux source package in Utopic:
  Triaged

Bug description:
  Hi,

  Nature of peoblem : Bluetooth not wotrking under Ubuntu 14.04 but wifi
  working fine. pls help to provide the solution

  Vendor ID : 0489:e078
  Make of Wifi BT combo : Qualcom Atheros QCA9565 /AR9565 

  Regds,
  Bala S

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1352821/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] ProcModules.txt

apport information

** Attachment added: ProcModules.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323632/+files/ProcModules.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] ProcInterrupts.txt

apport information

** Attachment added: ProcInterrupts.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323631/+files/ProcInterrupts.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] Lspci.txt

apport information

** Attachment added: Lspci.txt
   https://bugs.launchpad.net/bugs/1423631/+attachment/4323628/+files/Lspci.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1305335] Re: Cutting or copying files on btrfs to ecryptfs results in data loss

2015-02-20 Thread Rocko

Just to note: in the example commands above, of course, /home needs to
be write-accessible to the current user, or you need to use a command
like su root -c echo test  /home/test.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1305335

Title:
  Cutting or copying files on btrfs to ecryptfs results in data loss

Status in eCryptfs:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  I've installed a fresh copy of 14.04 beta 2 on a brand-new SSD.  I
  used btrfs as the filesystem.

  I set up a Private folder usying ecryptfs-setup-private.

  I copied a few folders into the Private folder, and the entire
  directory structure and subfolders are copied, including the files
  themselves, yet every file contains 0 bytes.

  However, I can create and save new files in the Private directory.
  Also, folders and files can be correctly copied if I use the command line cp 
-R.

  Thanks,
  Damon

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: nautilus 1:3.10.1-0ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Apr  9 18:12:56 2014
  EcryptfsInUse: Yes
  GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' 
b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 
'permissions', 'mime_type', 'where']
  InstallationDate: Installed on 2014-04-05 (4 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ecryptfs/+bug/1305335/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1305335] Re: Cutting or copying files on btrfs to ecryptfs results in data loss

2015-02-20 Thread Rocko

The 3.19 kernel still has the problem.

You can reproduce it by copying a test file from say /home into an
encrypted home directory using --reflink:

echo test  /home/test
cp --reflink=always /home/test ~
ls -l ~/test  # This shows 0 bytes

This command, however, copies the file correctly, assuming you haven't
aliased cp to use reflink:

echo test  /home/test
cp /home/test ~
ls -l ~/test  # This shows 5 bytes

nautilus is using the g_local_file_copy library command in glib, which
since automatically applies reflink since 2.36.4 (libglib2.0-bin is at
2.43.4-1 in Vivid). See the comment at
http://upstream.rosalinux.ru/changelogs/glib/2.36.4/changelog.html,
where it lists Btrfs clone/reflink ioctl support in g_local_file_copy 
as one of the changes.

So one solution would seem to be to modify the copy functionality to
disable reflink (or disallow the copy) if it detects it is copying into
a mounted ecryptfs directory (eg using /proc/mounts) from a directory
that is not in the same mount.

Presumably ecryptfs intercepts the copy request, so perhaps the check
should be done in ecryptfs?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1305335

Title:
  Cutting or copying files on btrfs to ecryptfs results in data loss

Status in eCryptfs:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  I've installed a fresh copy of 14.04 beta 2 on a brand-new SSD.  I
  used btrfs as the filesystem.

  I set up a Private folder usying ecryptfs-setup-private.

  I copied a few folders into the Private folder, and the entire
  directory structure and subfolders are copied, including the files
  themselves, yet every file contains 0 bytes.

  However, I can create and save new files in the Private directory.
  Also, folders and files can be correctly copied if I use the command line cp 
-R.

  Thanks,
  Damon

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: nautilus 1:3.10.1-0ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Apr  9 18:12:56 2014
  EcryptfsInUse: Yes
  GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' 
b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 
'permissions', 'mime_type', 'where']
  InstallationDate: Installed on 2014-04-05 (4 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ecryptfs/+bug/1305335/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1402957] Re: kernel panic on bootup exit code: 0x000000b0 - now I can`t boot

2015-02-20 Thread EmanueL Czirai

OP said here: https://bugzilla.kernel.org/show_bug.cgi?id=90001#c5
This is RAM issue I have mixed 2x4GB Hynix CL 11-11-11-28 and Geil 8GB CL 
10-10-10-28. After remove Geil RAM this problem disappear.
 And as far as I am concerned (see my #44 comment above) I fixed mine (besides 
it was in Gentoo) by recreating my initramfs with --luks parameter.
 So I am thinking this isn't an issue anymore? Maybe OP(Stanimir) can confirm 
here too. Thanks.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1402957

Title:
  kernel panic on bootup exit code: 0x00b0 - now I can`t boot

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  after upgrade to ubuntu 14.10 on the first bootup I have always
  Kernel panic - not syncing: Attempted to kill init! exit code
  0x00b0 (I`m not sure for the exit code)

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: ubuntu-release-upgrader-core 1:14.10.9
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CrashDB: ubuntu
  Date: Tue Dec 16 09:19:33 2014
  InstallationDate: Installed on 2012-12-06 (739 days ago)
  InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5)
  PackageArchitecture: all
  SourcePackage: ubuntu-release-upgrader
  Symptom: release-upgrade
  UpgradeStatus: Upgraded to utopic on 2014-12-09 (6 days ago)
  --- 
  ApportVersion: 2.12.5-0ubuntu2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  ubuntu 2942 F pulseaudio
   /dev/snd/controlC0:  ubuntu 2942 F pulseaudio
  CasperVersion: 1.336ubuntu1
  DistroRelease: Ubuntu 13.10
  LiveMediaBuild: Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)
  MachineType: ASUSTeK COMPUTER INC. G75VW
  MarkForUpload: True
  Package: linux (not installed)
  ProcEnviron:
   LANGUAGE=en_US
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
  PulseList:
   Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not 
accessible: Permission denied
   No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.11.0-12-generic N/A
   linux-backports-modules-3.11.0-12-generic  N/A
   linux-firmware 1.116
  Tags:  saucy
  Uname: Linux 3.11.0-12-generic i686
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 10/23/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: G75VW.221
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: G75VW
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrG75VW.221:bd10/23/2012:svnASUSTeKCOMPUTERINC.:pnG75VW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnG75VW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: G75VW
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1402957/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1386490] Re: HP ProLiant m400 nic doesn't work after trusty

2015-02-20 Thread Alberto Salvia Novella

** Changed in: debian-installer (Ubuntu Vivid)
   Importance: Undecided = High

** Changed in: debian-installer (Ubuntu Utopic)
   Importance: Undecided = High

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1386490

Title:
  HP ProLiant m400 nic doesn't work after trusty

Status in The Linux Kernel:
  New
Status in The Santacruz project:
  New
Status in debian-installer package in Ubuntu:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in debian-installer source package in Utopic:
  Fix Released
Status in linux source package in Utopic:
  Fix Released
Status in debian-installer source package in Vivid:
  Confirmed
Status in linux source package in Vivid:
  Confirmed

Bug description:
  Starting in 3.15, arm64 began defaulting to non-coherent dma_ops:

  commit c7a4a7658d689f664050c45493d79adf053f226e
  Author: Ritesh Harjani ritesh.harj...@gmail.com
  Date:   Wed Apr 23 06:29:46 2014 +0100

  arm64: Make default dma_ops to be noncoherent

  Firmware (dtb in the case of the m400) is responsible for telling the
  kernel when a device requires coherent dma_ops. However, as of utopic,
  this property is not being inherited by downstream devices.
  Specifically, the xgene-pcie device is marked as coherent, but the
  devices behind it (mellanox card) still get initialized with non-
  coherent ops.

  This results in the mlx4 driver bailing out with the following messages:
  [   18.703635] mlx4_core :01:00.0: command 0x23 timed out (go bit not 
cleared)
  [   18.710911] mlx4_core :01:00.0: Failed to initialize queue pair table, 
aborting

  
  There's an upstream discussion on the topic here:
http://www.spinics.net/lists/arm-kernel/msg362320.html

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1386490/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1319589] Re: [drm:rv770_dpm_set_power_state] ERROR rv770_set_sw_state failed

2015-02-20 Thread Valentin Crone

Now, on Ubuntu 14.04.1 LTS with Linux 3.18.1:

valentin@ACER-VALENTIN2:~$ dmesg | grep drm
[   13.285632] [drm] Initialized drm 1.1.0 20060810
[   14.558393] [drm] radeon kernel modesetting enabled.
[   14.558511] fb: switching to radeondrmfb from VESA VGA
[   14.560642] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 
0x1025:0x0293).
[   14.560662] [drm] register mmio base: 0xCFEF
[   14.560664] [drm] register mmio size: 65536
[   14.560765] [drm] Detected VRAM RAM=512M, BAR=256M
[   14.560767] [drm] RAM width 64bits DDR
[   14.560876] [drm] radeon: 512M of VRAM memory ready
[   14.560878] [drm] radeon: 1024M of GTT memory ready.
[   14.560894] [drm] Loading RV710 Microcode
[   15.463701] [drm] radeon: dpm initialized
[   15.642370] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   15.644694] [drm] enabling PCIE gen 2 link speeds, disable with 
radeon.pcie_gen2=0
[   15.647056] [drm] PCIE GART of 1024M enabled (table at 0x0025E000).
[   15.648025] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.648026] [drm] Driver supports precise vblank timestamp query.
[   15.648096] [drm] radeon: irq initialized.
[   15.693947] [drm] ring test on 0 succeeded in 1 usecs
[   15.693953] [drm] ring test on 3 succeeded in 2 usecs
[   15.878415] [drm] ring test on 5 succeeded in 1 usecs
[   15.878420] [drm] UVD initialized successfully.
[   15.878564] [drm] ib test on ring 0 succeeded in 0 usecs
[   15.878596] [drm] ib test on ring 3 succeeded in 0 usecs
[   16.536650] [drm] ib test on ring 5 succeeded
[   16.538081] [drm] radeon atom DIG backlight initialized
[   16.538089] [drm] Radeon Display Connectors
[   16.538091] [drm] Connector 0:
[   16.538093] [drm]   LVDS-1
[   16.538096] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 
0x7f74
[   16.538097] [drm]   Encoders:
[   16.538098] [drm] LCD1: INTERNAL_UNIPHY2
[   16.538100] [drm] Connector 1:
[   16.538101] [drm]   VGA-1
[   16.538103] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 
0x7e4c
[   16.538104] [drm]   Encoders:
[   16.538105] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[   16.538106] [drm] Connector 2:
[   16.538107] [drm]   HDMI-A-1
[   16.538109] [drm]   HPD1
[   16.538110] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 
0x7e5c
[   16.538111] [drm]   Encoders:
[   16.538113] [drm] DFP1: INTERNAL_UNIPHY
[   17.507350] [drm] fb mappable at 0xD045F000
[   17.507355] [drm] vram apper at 0xD000
[   17.507357] [drm] size 4325376
[   17.507358] [drm] fb depth is 24
[   17.507360] [drm]pitch is 5632
[   17.507544] fbcon: radeondrmfb (fb0) is primary device
[   17.967586] radeon :02:00.0: fb0: radeondrmfb frame buffer device
[   17.989768] [drm] Initialized radeon 2.40.0 20080528 for :02:00.0 on 
minor 0


It seem to be fixed :)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1319589

Title:
  [drm:rv770_dpm_set_power_state] *ERROR* rv770_set_sw_state failed

Status in Direct Rendering Infrastructure:
  Confirmed
Status in linux package in Ubuntu:
  Expired

Bug description:
  Hello,
  On Ubuntu 14.04 LTS, when the computer starts (before the splash screen 
appears), I see this error in the console:

  [drm:rv770_dpm_set_power_state] *ERROR* rv770_set_sw_state failed

  I don't know what does exactly this bug, but I supposed that it's not
  normal.

  
  OS: Linux
  Type: amd64
  Distribution: Ubuntu 14.04 LTS
  GPU: ATI Mobility Radeon HD 4570
  → 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] 
RV710/M92 [Mobility Radeon HD 4530/4570/545v]

  Kernel: 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014
  x86_64 x86_64 x86_64 GNU/Linux

  I use the free driver for Linux, ATI doesn't support this GPU with
  proprietary drivers today... but without this little bug, the free
  drivers are very good :)

  
  Message appears at [   17.026313]
  (See dmesg file)

  Thank you.
  --- 
  ApportVersion: 2.14.1-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  valentin   4277 F pulseaudio
   /dev/snd/controlC0:  valentin   4277 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=2fe681c2-5497-453b-bc19-4401ca76baaf
  InstallationDate: Installed on 2014-05-06 (8 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  MachineType: Acer Aspire 5542
  Package: linux (not installed)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic 
root=UUID=20964cff-7885-4482-8618-d60d52c7d229 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-24-generic N/A
   linux-backports-modules-3.13.0-24-generic  N/A
   linux-firmware 1.127.2

[Kernel-packages] [Bug 1402331] Re: System will periodically lockup with [drm:i915_hangcheck_elapsed] ERROR Hangcheck timer elapsed... render ring idle

2015-02-20 Thread chris pollock

** Attachment added: dmesg output drm.debug=0x06
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1402331/+attachment/4323687/+files/dmesg

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1402331

Title:
  System will periodically lockup with [drm:i915_hangcheck_elapsed]
  *ERROR* Hangcheck timer elapsed... render ring idle

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I have noticed the lockups periodically since 09/13/2014. I can't
  remember what kernel version was in use then possibly kernel
  3.13.0-35-generic or -36. It has continued periodically through
  versions -39; -40 and now to -43.  The last time this has happened was
  today Dec 13 14:40:57 localhost kernel: [154858.820009]
  [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... render
  ring idle. At times when it locks up I will have a cursor on a black
  screen and will have to press the power button to restart other times
  it will lockup whenever I'm in an application such as Firefox or
  Evolution. At that time I can usually CTRLALT-F1 log in and run 'sudo
  reboot' to restart the system.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-43-generic 3.13.0-43.72
  ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11
  Uname: Linux 3.13.0-43-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  chris  2445 F pulseaudio
  CurrentDesktop: GNOME
  Date: Sat Dec 13 20:22:51 2014
  HibernationDevice: RESUME=UUID=bb329dc0-0642-4b6a-876a-12c2f02fb7f6
  InstallationDate: Installed on 2014-10-24 (50 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  IwConfig:
   eth0  no wireless extensions.

   lono wireless extensions.
  MachineType: Dell Inc. OptiPlex 780
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic 
root=UUID=4254a7e9-429b-4f53-a08c-ae7ff839b98f ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-43-generic N/A
   linux-backports-modules-3.13.0-43-generic  N/A
   linux-firmware 1.127.10
  RfKill:

  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/13/2010
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A03
  dmi.board.name: 0C27VV
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.asset.tag: LE0006476
  dmi.chassis.type: 6
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA03:bd02/13/2010:svnDellInc.:pnOptiPlex780:pvr:rvnDellInc.:rn0C27VV:rvrA01:cvnDellInc.:ct6:cvr:
  dmi.product.name: OptiPlex 780
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1402331/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1402331] Re: System will periodically lockup with [drm:i915_hangcheck_elapsed] ERROR Hangcheck timer elapsed... render ring idle

2015-02-20 Thread chris pollock

Again another lockup this evening at 19:16:40, 20 Feb 2015. And again
the 'Hangcheck' error did not make itself known, what my syslog shows
for this time period before the CTRLALTF1 is:

Feb 20 19:17:01 localhost CRON[29189]: (root) CMD (   cd /  run-parts 
--report /etc/cron.hourly)
Feb 20 19:17:28 localhost kernel: [129187.759473] 
[drm:intel_crtc_cursor_set_obj] cursor off
Feb 20 19:17:28 localhost kernel: [129187.759479] [drm:g4x_check_srwm] SR 
watermark: display plane 92, cursor 2
Feb 20 19:17:28 localhost kernel: [129187.759481] [drm:g4x_check_srwm] display 
watermark is too large(92/63), disabling
Feb 20 19:17:28 localhost kernel: [129187.759483] [drm:intel_set_memory_cxsr] 
memory self-refresh is disabled
Feb 20 19:17:28 localhost kernel: [129187.759485] [drm:g4x_update_wm] Setting 
FIFO watermarks - A: plane=40, cursor=2, B: plane=2, cursor=2, SR: plane=0, 
cursor=0
Feb 20 19:17:29 localhost kernel: [129189.173796] [drm:intel_crtc_set_config] 
[CRTC:9] [FB:47] #connectors=1 (x y) (0 0)
Feb 20 19:17:29 localhost kernel: [129189.173800] 
[drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:9], 
mode_changed=0, fb_changed=1
Feb 20 19:17:29 localhost kernel: [129189.173803] 
[drm:intel_modeset_stage_output_state] [CONNECTOR:13:VGA-1] to [CRTC:9]
Feb 20 19:17:29 localhost kernel: [129189.173805] 
[drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, 
disable: 0
Feb 20 19:17:29 localhost kernel: [129189.173808] 
[drm:connected_sink_compute_bpp] [CONNECTOR:13:VGA-1] checking for sink bpp 
constrains
Feb 20 19:17:29 localhost kernel: [129189.173810] 
[drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
Feb 20 19:17:29 localhost kernel: [129189.173812] [drm:intel_dump_pipe_config] 
[CRTC:9][modeset] config for pipe A
Feb 20 19:17:29 localhost kernel: [129189.173813] [drm:intel_dump_pipe_config] 
cpu_transcoder: A
Feb 20 19:17:29 localhost kernel: [129189.173814] [drm:intel_dump_pipe_config] 
pipe bpp: 24, dithering: 0
Feb 20 19:17:29 localhost kernel: [129189.173816] [drm:intel_dump_pipe_config] 
fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
Feb 20 19:17:29 localhost kernel: [129189.173817] [drm:intel_dump_pipe_config] 
dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
Feb 20 19:17:29 localhost kernel: [129189.173819] [drm:intel_dump_pipe_config] 
dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
Feb 20 19:17:29 localhost kernel: [129189.173820] [drm:intel_dump_pipe_config] 
audio: 0, infoframes: 0
Feb 20 19:17:29 localhost kernel: [129189.173820] [drm:intel_dump_pipe_config] 
requested mode:
Feb 20 19:17:29 localhost kernel: [129189.173823] 
[drm:drm_mode_debug_printmodeline] Modeline 0:1680x1050 60 119000 1680 1728 
1760 1840 1050 1053 1059 1080 0x48 0xa
Feb 20 19:17:29 localhost kernel: [129189.173824] [drm:intel_dump_pipe_config] 
adjusted mode:
Feb 20 19:17:29 localhost kernel: [129189.173827] 
[drm:drm_mode_debug_printmodeline] Modeline 0:1680x1050 60 119000 1680 1728 
1760 1840 1050 1053 1059 1080 0x48 0xa
Feb 20 19:17:29 localhost kernel: [129189.173829] [drm:intel_dump_crtc_timings] 
crtc timings: 119000 1680 1728 1760 1840 1050 1053 1059 1080, type: 0x48 flags: 
0xa
Feb 20 19:17:29 localhost kernel: [129189.173830] [drm:intel_dump_pipe_config] 
port clock: 119000
Feb 20 19:17:29 localhost kernel: [129189.173831] [drm:intel_dump_pipe_config] 
pipe src size: 1680x1050
Feb 20 19:17:29 localhost kernel: [129189.173832] [drm:intel_dump_pipe_config] 
gmch pfit: control: 0x, ratios: 0x, lvds border: 0x
Feb 20 19:17:29 localhost kernel: [129189.173834] [drm:intel_dump_pipe_config] 
pch pfit: pos: 0x, size: 0x, disabled
Feb 20 19:17:29 localhost kernel: [129189.173835] [drm:intel_dump_pipe_config] 
ips: 0
Feb 20 19:17:29 localhost kernel: [129189.173836] [drm:intel_dump_pipe_config] 
double wide: 0
Feb 20 19:17:29 localhost kernel: [129189.173846] 
[drm:i9xx_update_primary_plane] Writing base 00546000  0 0 6720

I have no idea as to whether I should submit a new bug or what. Looking
for some advice here from someone.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1402331

Title:
  System will periodically lockup with [drm:i915_hangcheck_elapsed]
  *ERROR* Hangcheck timer elapsed... render ring idle

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I have noticed the lockups periodically since 09/13/2014. I can't
  remember what kernel version was in use then possibly kernel
  3.13.0-35-generic or -36. It has continued periodically through
  versions -39; -40 and now to -43.  The last time this has happened was
  today Dec 13 14:40:57 localhost kernel: [154858.820009]
  [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... render
  ring idle. At times when it locks up I will have a cursor on a black
  screen and

[Kernel-packages] [Bug 1305335] Re: Cutting or copying files on btrfs to ecryptfs results in data loss

2015-02-20 Thread Rocko

** Tags added: kernel-bug-exists-upstream

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1305335

Title:
  Cutting or copying files on btrfs to ecryptfs results in data loss

Status in eCryptfs:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  I've installed a fresh copy of 14.04 beta 2 on a brand-new SSD.  I
  used btrfs as the filesystem.

  I set up a Private folder usying ecryptfs-setup-private.

  I copied a few folders into the Private folder, and the entire
  directory structure and subfolders are copied, including the files
  themselves, yet every file contains 0 bytes.

  However, I can create and save new files in the Private directory.
  Also, folders and files can be correctly copied if I use the command line cp 
-R.

  Thanks,
  Damon

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: nautilus 1:3.10.1-0ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Apr  9 18:12:56 2014
  EcryptfsInUse: Yes
  GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' 
b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 
'permissions', 'mime_type', 'where']
  InstallationDate: Installed on 2014-04-05 (4 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ecryptfs/+bug/1305335/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1410519] Re: [PowerVM] Kernel BUG @ kernel/irq_work.c:157! - 24x7 hw counters

2015-02-20 Thread bugproxy

--- Comment From ss...@in.ibm.com 2015-02-20 15:33 EDT---
(In reply to comment #19)
 Actually I see that you've verified with 3.18 kernels, can someone verify
 with the 3.16 kernel as mentioned in comment #6? Thanks

I have verified the problem with 3.16 kernel (3.16.0-31-generic) from
utopic proposed and confirm that the problem is resolved.

** Tags removed: verification-needed-utopic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1410519

Title:
  [PowerVM] Kernel BUG @ kernel/irq_work.c:157!  - 24x7 hw counters

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Utopic:
  Fix Committed

Bug description:
  [Impact]
  Using perf with hv_24x7 events can cause a kernel BUG.

  [Fix]
  The following upstream commits:
   d658972
   48bee8a
   f34b6c7
   ec2aef5

  [Test Case]
  Steps to recreate the problem:

  1.  Install Ubuntu 15.04 as a PowerVM guest.
  2.  Install perf tool
  3.  Run following scripts to test 24/7 Power8 hardware counter event with 
perf. tool

  ===  Script 1
  #!/bin/bash

  count=0;

  offset=0x128
  PERF_ARGS=-r 10 -C 0
  while [ $count -lt 100 ]; do

  EVENT=hv_24x7/domain=0x2,offset=$offset,starting_index=10/

  perf stat $PERF_ARGS -x ' ' perf stat $PERF_ARGS -x ' ' -e
  $EVENT ls

  count=)
  done

   Script 2
  #!/bin/bash

  offset=0;

  PERF_ARGS=-r 10 -C 0
  while [ $offset -lt 8192 ]; do

  EVENT=hv_24x7/domain=0x2,offset=$offset,starting_index=10/

  perf stat $PERF_ARGS -x ' ' perf stat $PERF_ARGS -x ' ' -e
  $EVENT ls

  offset=)
  done

  After few iterations I hit the following BUG.

  tt2.sh  tt.sh
  tt2.sh  tt.sh
  tt2.sh  tt.sh
  275679187521558  hv_24x7/domain=0x2,offset=6848,starting_index=10/ 0.00%
  tt2.sh  tt.sh
  [ 4657.314709] softirq: huh, entered softirq 7 SCHED c010abc0 with 
preem
  pt_count 0100, exited with bfff?
  [ 4657.314727] kernel BUG at /build/buildd/linux-3.16.0/kernel/irq_work.c:157!
  [ 4657.314732] Oops: Exception in kernel mode, sig: 5 [#1]
  [ 4657.314740] Modules linked in: rtc_generic pseries_rng
  [ 4657.314749] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-25-generic 
#33-U
  [ 4657.314755] task: c1375e00 ti: c13d task.ti: 
c13d
  [ 4657.314759] NIP: c01e8ffc LR: c001fe70 CTR: 
c0002800ic)
  [ 4657.314770] MSR: 80029033 SF,EE,ME,IR,DR,RI,LE  CR: 28042024  
XER: 000a
  [ 4657.314782] CFAR: c001fe6c SOFTE: 0
  GPR04: 0010 009c c1424a98 0002
  GPR12: 80009033 ce9a 06a3fcd0 0060
  GPR16: 0020  c0e57c00 
  GPR20: c1595dca c1595478 0001 
  GPR28: c0e40380 c0e40300 c13d3590 c0e56f08
  [ 4657.314832] NIP [c01e8ffc] irq_work_run+0x1c/0x30
  [ 4657.314841] Call Trace:
  4000 (unreliable)
  [ 4657.314861] [c13d34f0] [c001ff90] timer_interrupt+0xa0/0xe0
  [ 4657.314871] [c13d3520] [c0002914] 
decrementer_common+0x114/0x180
  [ 4657.314884] --- Exception: 901 at arch_local_irq_restore+0x14/0x90
  [ 4657.314896] [c13d3810] [c012ed08] vprintk_emit+0x3b8/0x660 
(u
  [ 4657.314908] [c13d38e0] [c0a02650] printk+0x84/0x98
  [ 4657.314918] [c13d3910] [c00b51b4] __do_softirq+0x1e4/0x410
  [ 4657.314927] [c13d3a00] [c00b57b8] irq_exit+0xf8/0x1400
  [ 4657.314948] [c13d3a60] [c0002c14] 
doorbell_super_common+0x114/0x180
  [ 4657.314963] --- Exception: a01 at plpar_hcall_norets+0x8c/0xdc
  [ 4657.314963] LR = check_and_cede_processor+0x34/0x5020/0x50 (unreliable)
  [ 4657.314997] [c13d3df0] [c084077c] 
cpuidle_enter_state+0x6c/0x140c0
  [ 4657.315030] [c13d3f00] [c0d63ea8] start_kernel+0x500/0x51c
  [ 4657.315047] Instruction dump:
  [ 4657.315052] eba1ffe8 7c0803a6 ebc1fff0 ebe1fff8 4e800020 3c4c011f 3842c110 
78290464
  [ 4657.315068] 81290014 752a000f 7d380026 55291ffe 0b09 4bfffec8 
6000
  6000
  [ 4657.315090] ---[ end trace ee202cccd2211e5d ]---
  [ 4657.320224]
  [ 4657.362675] Unable to handle kernel paging request for data at address 
0xc000
  000b35515048
  [ 4657.362680] Faulting instruction address: 0xc006a37c
  [ 4657.362684] Oops: Kernel access of bad area, sig: 11 [#2]
  [ 4657.362686] SMP NR_CPUS=2048 NUMA pSeries
  [ 4657.362695] CPU: 12 PID: 7 Comm: rcu_sched Tainted: G  D   
3.16.0-25-
  [ 4657.362699] task: c000eb581540 ti: c000eb604000 task.ti: 
c000eb60
  [ 4657.362703] NIP: c006a37c LR: c00865a8 CTR: 
c006a340
  [ 4657.362706] REGS: c000eb607800 TRAP: 0300   Tainted: G  D
(3.16.0-25-generic)
  
  [

[Kernel-packages] [Bug 1410519] Re: [PowerVM] Kernel BUG @ kernel/irq_work.c:157! - 24x7 hw counters

Thanks!

** Tags added: verification-done-utopic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1410519

Title:
  [PowerVM] Kernel BUG @ kernel/irq_work.c:157!  - 24x7 hw counters

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Utopic:
  Fix Committed

Bug description:
  [Impact]
  Using perf with hv_24x7 events can cause a kernel BUG.

  [Fix]
  The following upstream commits:
   d658972
   48bee8a
   f34b6c7
   ec2aef5

  [Test Case]
  Steps to recreate the problem:

  1.  Install Ubuntu 15.04 as a PowerVM guest.
  2.  Install perf tool
  3.  Run following scripts to test 24/7 Power8 hardware counter event with 
perf. tool

  ===  Script 1
  #!/bin/bash

  count=0;

  offset=0x128
  PERF_ARGS=-r 10 -C 0
  while [ $count -lt 100 ]; do

  EVENT=hv_24x7/domain=0x2,offset=$offset,starting_index=10/

  perf stat $PERF_ARGS -x ' ' perf stat $PERF_ARGS -x ' ' -e
  $EVENT ls

  count=)
  done

   Script 2
  #!/bin/bash

  offset=0;

  PERF_ARGS=-r 10 -C 0
  while [ $offset -lt 8192 ]; do

  EVENT=hv_24x7/domain=0x2,offset=$offset,starting_index=10/

  perf stat $PERF_ARGS -x ' ' perf stat $PERF_ARGS -x ' ' -e
  $EVENT ls

  offset=)
  done

  After few iterations I hit the following BUG.

  tt2.sh  tt.sh
  tt2.sh  tt.sh
  tt2.sh  tt.sh
  275679187521558  hv_24x7/domain=0x2,offset=6848,starting_index=10/ 0.00%
  tt2.sh  tt.sh
  [ 4657.314709] softirq: huh, entered softirq 7 SCHED c010abc0 with 
preem
  pt_count 0100, exited with bfff?
  [ 4657.314727] kernel BUG at /build/buildd/linux-3.16.0/kernel/irq_work.c:157!
  [ 4657.314732] Oops: Exception in kernel mode, sig: 5 [#1]
  [ 4657.314740] Modules linked in: rtc_generic pseries_rng
  [ 4657.314749] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-25-generic 
#33-U
  [ 4657.314755] task: c1375e00 ti: c13d task.ti: 
c13d
  [ 4657.314759] NIP: c01e8ffc LR: c001fe70 CTR: 
c0002800ic)
  [ 4657.314770] MSR: 80029033 SF,EE,ME,IR,DR,RI,LE  CR: 28042024  
XER: 000a
  [ 4657.314782] CFAR: c001fe6c SOFTE: 0
  GPR04: 0010 009c c1424a98 0002
  GPR12: 80009033 ce9a 06a3fcd0 0060
  GPR16: 0020  c0e57c00 
  GPR20: c1595dca c1595478 0001 
  GPR28: c0e40380 c0e40300 c13d3590 c0e56f08
  [ 4657.314832] NIP [c01e8ffc] irq_work_run+0x1c/0x30
  [ 4657.314841] Call Trace:
  4000 (unreliable)
  [ 4657.314861] [c13d34f0] [c001ff90] timer_interrupt+0xa0/0xe0
  [ 4657.314871] [c13d3520] [c0002914] 
decrementer_common+0x114/0x180
  [ 4657.314884] --- Exception: 901 at arch_local_irq_restore+0x14/0x90
  [ 4657.314896] [c13d3810] [c012ed08] vprintk_emit+0x3b8/0x660 
(u
  [ 4657.314908] [c13d38e0] [c0a02650] printk+0x84/0x98
  [ 4657.314918] [c13d3910] [c00b51b4] __do_softirq+0x1e4/0x410
  [ 4657.314927] [c13d3a00] [c00b57b8] irq_exit+0xf8/0x1400
  [ 4657.314948] [c13d3a60] [c0002c14] 
doorbell_super_common+0x114/0x180
  [ 4657.314963] --- Exception: a01 at plpar_hcall_norets+0x8c/0xdc
  [ 4657.314963] LR = check_and_cede_processor+0x34/0x5020/0x50 (unreliable)
  [ 4657.314997] [c13d3df0] [c084077c] 
cpuidle_enter_state+0x6c/0x140c0
  [ 4657.315030] [c13d3f00] [c0d63ea8] start_kernel+0x500/0x51c
  [ 4657.315047] Instruction dump:
  [ 4657.315052] eba1ffe8 7c0803a6 ebc1fff0 ebe1fff8 4e800020 3c4c011f 3842c110 
78290464
  [ 4657.315068] 81290014 752a000f 7d380026 55291ffe 0b09 4bfffec8 
6000
  6000
  [ 4657.315090] ---[ end trace ee202cccd2211e5d ]---
  [ 4657.320224]
  [ 4657.362675] Unable to handle kernel paging request for data at address 
0xc000
  000b35515048
  [ 4657.362680] Faulting instruction address: 0xc006a37c
  [ 4657.362684] Oops: Kernel access of bad area, sig: 11 [#2]
  [ 4657.362686] SMP NR_CPUS=2048 NUMA pSeries
  [ 4657.362695] CPU: 12 PID: 7 Comm: rcu_sched Tainted: G  D   
3.16.0-25-
  [ 4657.362699] task: c000eb581540 ti: c000eb604000 task.ti: 
c000eb60
  [ 4657.362703] NIP: c006a37c LR: c00865a8 CTR: 
c006a340
  [ 4657.362706] REGS: c000eb607800 TRAP: 0300   Tainted: G  D
(3.16.0-25-generic)
  
  [ 4657.362718] CFAR: c00865a4 DAR: c00b35515048 DSISR: 4000 
SOFTE: 0
  GPR00: c00865a8 c000eb607a80 c13d50f0 013d30d0
  GPR08: 00cc c00b35515000 ce9a 
  GPR12: c006a340 ce9a6c00  0001
  GPR20:

[Kernel-packages] [Bug 1423780] Re: package linux-image-3.13.0-45-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1

You may need to run the following:

sudo apt-get install -f
sudo apt-get clean
sudo apt-get update

Then re-install the package.

If that does not resolve your issue, please mark the bug as Confirmed

** Changed in: linux (Ubuntu)
   Importance: Undecided = Low

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423780

Title:
  package linux-image-3.13.0-45-generic (not installed) failed to
  install/upgrade: subprocess new pre-installation script returned error
  exit status 1

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Fresh install of Lubuntu 14.04.1 LTS.
  Occured when I was installing the NVidia 173.14.39 drivers through the 
Aditional Drivers utility.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-45-generic (not installed)
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic i686
  ApportVersion: 2.14.1-0ubuntu3.2
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  user   1200 F lxpanel
  CRDA: Error: [Errno 2] No such file or directory: 'iw'
  Date: Thu Feb 19 18:48:04 2015
  DuplicateSignature: package:linux-image-3.13.0-45-generic:(not 
installed):subprocess new pre-installation script returned error exit status 1
  ErrorMessage: subprocess new pre-installation script returned error exit 
status 1
  HibernationDevice: RESUME=UUID=cba85f17-92f6-4a40-ba8d-625dcfa0d7b6
  InstallationDate: Installed on 2015-02-20 (0 days ago)
  InstallationMedia: Lubuntu 14.04.1 LTS Trusty Tahr - Release i386 
(20140722.2)
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: TOSHIBA PORTEGE M200
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic 
root=UUID=3b7a785b-433f-46af-8552-a04cf991e82f ro quiet splash vt.handoff=7
  RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: linux
  Title: package linux-image-3.13.0-45-generic (not installed) failed to 
install/upgrade: subprocess new pre-installation script returned error exit 
status 1
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/16/2004
  dmi.bios.vendor: TOSHIBA
  dmi.bios.version: Version 1.60
  dmi.board.name: Portable PC
  dmi.board.vendor: TOSHIBA
  dmi.board.version: Version A0
  dmi.chassis.asset.tag: 00
  dmi.chassis.type: 10
  dmi.chassis.vendor: TOSHIBA
  dmi.chassis.version: Version 1.0
  dmi.modalias: 
dmi:bvnTOSHIBA:bvrVersion1.60:bd07/16/2004:svnTOSHIBA:pnPORTEGEM200:pvrPPM21U-02SXD4:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0:
  dmi.product.name: PORTEGE M200
  dmi.product.version: PPM21U-02SXD4
  dmi.sys.vendor: TOSHIBA

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423780/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423764] Re: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.19 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot, 
please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as 
Confirmed.


Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/


** Changed in: linux (Ubuntu)
   Importance: Undecided = Medium

** Changed in: linux (Ubuntu)
   Status: Confirmed = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423764

Title:
  [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Happened when I booted the laptop, the error came up.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.18.0-13-generic 3.18.0-13.14 [modified: 
boot/vmlinuz-3.18.0-13-generic]
  ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5
  Uname: Linux 3.18.0-13-generic x86_64
  Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
  ApportVersion: 2.16.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  joshciares   1945 F pulseaudio
   /dev/snd/controlC0:  joshciares   1945 F pulseaudio
  Date: Thu Feb 19 19:39:21 2015
  DuplicateSignature: suspend/resume:Hewlett-Packard HP 2000 Notebook PC:F.25
  ExecutablePath: /usr/share/apport/apportcheckresume
  Failure: suspend/resume
  HibernationDevice: RESUME=UUID=cd4b5c06-e71d-4b1d-ba85-bb23499de6c6
  InstallationDate: Installed on 2015-02-15 (4 days ago)
  InstallationMedia: Xubuntu 15.04 Vivid Vervet - Alpha amd64 (20150214)
  InterpreterPath: /usr/bin/python3.4
  MachineType: Hewlett-Packard HP 2000 Notebook PC
  ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-13-generic.efi.signed 
root=UUID=f03ab60b-078b-4caf-bcc2-e67a71531d9c ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-3.18.0-13-generic N/A
   linux-backports-modules-3.18.0-13-generic  N/A
   linux-firmware 1.141
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  SourcePackage: linux
  Title: [Hewlett-Packard HP 2000 Notebook PC] suspend/resume failure
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  dmi.bios.date: 02/21/2013
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.25
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 188B
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 69.14
  dmi.chassis.asset.tag: 5CG3243S66
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.25:bd02/21/2013:svnHewlett-Packard:pnHP2000NotebookPC:pvr088811000330591620100:rvnHewlett-Packard:rn188B:rvrKBCVersion69.14:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP 2000 Notebook PC
  dmi.product.version: 088811000330591620100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423764/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1362046] Re: kernel module (sony-laptop)

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.19 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot, 
please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as 
Confirmed.


Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/


** Changed in: linux (Ubuntu)
   Status: In Progress = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1362046

Title:
  kernel module (sony-laptop)

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Laptop Keyboard Backlight not turning off

  I had a problem with keyboard backlight that I asked in askUbuntu.com  (here 
http://askubuntu.com/questions/475711/turn-off-keyboard-back-light-sony-vaio-svf1521dcxw)
  and also I have followed in chat with @Mew (here 
http://chat.stackexchange.com/transcript/16735) and We tried all solution to 
fixing my issue and we can not fix that. I found some patch 
(http://www.absence.it/vaio-acpi/source/patches/) for fixing this problem but 
then I need to create a custom kernel for myself and it's so hard for me.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  kasiya 1906 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-06-27 (60 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  MachineType: Sony Corporation SVF1521DCXW
  NonfreeKernelModules: wl
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic 
root=UUID=2aac8bca-f028-4744-a525-08ce1c46ff21 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-34-generic N/A
   linux-backports-modules-3.13.0-34-generic  N/A
   linux-firmware 1.127.5
  Tags:  trusty
  Uname: Linux 3.13.0-34-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 11/18/2013
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: R0220DA
  dmi.board.asset.tag: N/A
  dmi.board.name: VAIO
  dmi.board.vendor: Sony Corporation
  dmi.board.version: N/A
  dmi.chassis.asset.tag: N/A
  dmi.chassis.type: 10
  dmi.chassis.vendor: Sony Corporation
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvrR0220DA:bd11/18/2013:svnSonyCorporation:pnSVF1521DCXW:pvrC10H89HU:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A:
  dmi.product.name: SVF1521DCXW
  dmi.product.version: C10H89HU
  dmi.sys.vendor: Sony Corporation
  --- 
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  kasiya 1845 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-06-27 (62 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  Lsusb:
   Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
   Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 001 Device 003: ID 5986:0543 Acer, Inc 
   Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Sony Corporation SVF1521DCXW
  NonfreeKernelModules: wl
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-34-generic 
root=UUID=2aac8bca-f028-4744-a525-08ce1c46ff21 ro quiet splash
  ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-34-generic N/A
   linux-backports-modules-3.13.0-34-generic  N/A
   linux-firmware 1.127.5
  Tags:  trusty
  Uname: Linux 3.13.0-34-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  WifiSyslog: Aug 29 11:04:46 kasiya-pc kernel: [ 8261.057531] perf samples too 
long (2519  2500), lowering kernel.perf_event_max_sample_rate to 5
  _MarkForUpload: True
  dmi.bios.date: 11/18/2013
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: R0220DA
  dmi.board.asset.tag: N/A
  dmi.board.name: VAIO
  dmi.board.vendor: Sony

[Kernel-packages] [Bug 1424134] Re: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module failed to build

2015-02-20 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1424134

Title:
  bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module
  failed to build

Status in bcmwl package in Ubuntu:
  New

Bug description:
  Description:  Ubuntu 14.04.2 LTS
  Release:  14.04

  bcmwl-kernel-source:
Installed: 6.30.223.141+bdcom-0ubuntu2
Candidate: 6.30.223.141+bdcom-0ubuntu2
Version table:
   *** 6.30.223.141+bdcom-0ubuntu2 0
  500 http://in.archive.ubuntu.com/ubuntu/ trusty/restricted amd64 
Packages
  100 /var/lib/dpkg/status

  I expected it to start my wifi but my wifi is not working.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  Uname: Linux 3.16.0-30-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  DKMSKernelVersion: 3.16.0-30-generic
  Date: Sat Feb 21 17:15:59 2015
  DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function 'cfg80211_ibss_joined'
  InstallationDate: Installed on 2015-02-20 (0 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 
(20150218.1)
  PackageVersion: 6.30.223.141+bdcom-0ubuntu2
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1424134/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1424134] [NEW] bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module failed to build

2015-02-20 Thread Saprativa Bhattacharjee

Public bug reported:

Description:Ubuntu 14.04.2 LTS
Release:14.04

bcmwl-kernel-source:
  Installed: 6.30.223.141+bdcom-0ubuntu2
  Candidate: 6.30.223.141+bdcom-0ubuntu2
  Version table:
 *** 6.30.223.141+bdcom-0ubuntu2 0
500 http://in.archive.ubuntu.com/ubuntu/ trusty/restricted amd64 
Packages
100 /var/lib/dpkg/status

I expected it to start my wifi but my wifi is not working.

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
Uname: Linux 3.16.0-30-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.7
Architecture: amd64
DKMSKernelVersion: 3.16.0-30-generic
Date: Sat Feb 21 17:15:59 2015
DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function 'cfg80211_ibss_joined'
InstallationDate: Installed on 2015-02-20 (0 days ago)
InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1)
PackageVersion: 6.30.223.141+bdcom-0ubuntu2
SourcePackage: bcmwl
Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: bcmwl (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1424134

Title:
  bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module
  failed to build

Status in bcmwl package in Ubuntu:
  New

Bug description:
  Description:  Ubuntu 14.04.2 LTS
  Release:  14.04

  bcmwl-kernel-source:
Installed: 6.30.223.141+bdcom-0ubuntu2
Candidate: 6.30.223.141+bdcom-0ubuntu2
Version table:
   *** 6.30.223.141+bdcom-0ubuntu2 0
  500 http://in.archive.ubuntu.com/ubuntu/ trusty/restricted amd64 
Packages
  100 /var/lib/dpkg/status

  I expected it to start my wifi but my wifi is not working.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  Uname: Linux 3.16.0-30-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  DKMSKernelVersion: 3.16.0-30-generic
  Date: Sat Feb 21 17:15:59 2015
  DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function 'cfg80211_ibss_joined'
  InstallationDate: Installed on 2015-02-20 (0 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 
(20150218.1)
  PackageVersion: 6.30.223.141+bdcom-0ubuntu2
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1424134/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1400411] Re: Feature: cpuidle: Enable fastsleep and winkle in ubuntu 14.04.02 kernel

2015-02-20 Thread bugproxy

** Tags removed: verification-done-utopic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1400411

Title:
  Feature: cpuidle: Enable fastsleep and winkle in ubuntu 14.04.02
  kernel

Status in linux package in Ubuntu:
  Fix Committed
Status in linux source package in Utopic:
  Fix Committed

Bug description:
  SRU Justification:

  [Impact]
  Users would like to be able to use fastsleep and winkle cpuidle states in the 
3.16 Ubuntu kernel when using powernv.

  [Fix]
  commits
  d6a4f70909d279004a2b3d539e240e07b1ecc1cb
  56548fc0e86cb9156af7a7e1f15ba78f251dafaf
  8117ac6a6c2fa0f847ff6a21a1f32c8d2c8501d0
  8eb8ac89a364305d05ad16be983b7890eb462cc3 *backported*
  7cba160ad789a3ad7e68b92bf20eaad6ed171f80 *backported*
  77b54e9f213f76a23736940cf94bcd765fc00f40
  upstream

  [Test Case]
  Testing fastsleep
  -
  With these patches cpuidle framework picks up fastsleep as one of the idle 
states. You can observe the cpus entering fastsleep by checking
  /sys/devices/system/cpu/cpuXX/cpuidle/state2/name. This should show FastSleep.
  Then while system is idle check 
/sys/devices/system/cpu/cpuXX/cpuidle/state2/time increment over time
  This shows the amount of time a particular cpu was in fastsleep.

  Testing Winkle
  --
  With these patches, offline cpus enter winkle. So test this by offlining and 
onlining cpus.
  ppc64_cpu --cores-on=1
  ppc64_cpu --cores-on=X where X is the total number of cores available in the 
machine.

  --

  This is a feature request to enable power management features
  fastsleep and winkle cpuidle states in ubuntu -14.04.02 kernel. The
  cpuidle state management patches have been posted to Linux Kernel
  Community.

  Mailing list:
  [PATCH 0/4] powernv: cpuidle: Redesign idle states management
  https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-November/122433.html

  Patchset:
  [1/4] powerpc: powernv: Switch off MMU before entering nap/sleep/rvwinkle mode
  https://patchwork.ozlabs.org/patch/406249/

  [2/4] powerpc/powernv: Enable Offline CPUs to enter deep idle states
  https://patchwork.ozlabs.org/patch/406250/

  [3/4] powernv: cpuidle: Redesign idle states management
  https://patchwork.ozlabs.org/patch/406256/

  [4/4] powernv: powerpc: Add winkle support for offline cpus
  https://patchwork.ozlabs.org/patch/406251/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400411/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423796] Re: Unable to mount lvmcache root device at boot time

** Package changed: linux (Ubuntu) = lvm2 (Ubuntu)

** Changed in: lvm2 (Ubuntu)
   Status: Incomplete = New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423796

Title:
  Unable to mount lvmcache root device at boot time

Status in lvm2 package in Ubuntu:
  New

Bug description:
  I'm experiencing with Vivid Vervet on a virtual machine and tried a
  new LVM feature, lvmcache. I made a cache for the root file system,
  rebuilt the initrd and rebooted the VM.

  At boot time, the system failed to activate the root LV. After some
  investigation, I found out, it's because the initrd is missing some
  essential stuff needed for activating a cached LV.

  The initrd was missing the dm-cache module. I regenerated the initrd
  with explicitly listing dm-cache in /etc/initramfs-tools/modules, but
  the system still can't boot up, because now it is missing the
  /usr/sbin/cache_check utility.

  As SSDs are becoming more and more common, I think it will be common
  to use them as cache for root file systems, thus it is mandatory to
  make sure that an initrd can mount an lvmcached root device when
  necessary, preferably without /etc/initramfs-tools/modules and other
  initrd hacking.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lvm2/+bug/1423796/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423917] Re: System hangs when screen closed

Did this issue start happening after an update/upgrade? Was there a
prior kernel version where you were not having this particular problem?

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.19 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/

** Changed in: linux (Ubuntu)
Importance: Undecided = Medium

** Changed in: linux (Ubuntu)
Status: Confirmed = Incomplete

--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423917

Title:
System hangs when screen closed

Status in linux package in Ubuntu:
Incomplete

Bug description:
If I close the screen on my laptop (Thinkpad W530) the system will freeze.
Nothing functions at all, including reisub.
However, the fn/space bar still turns the keyboard backlight on / off; that
is working perfectly.
The volume / must buttons still toggle the 'mute' led on/off.
But the screen is frozen, the power button must be held for 5 seconds to
power down the system.
There is noting in the logs to indicate anything at all happens after the
system hangs, they just... stop.

After doing a hard boot, the system comes back up to grub, and then to a
flashing white cursor on a black background. I've left it at this screen for
45 minutes, and it goes no further.
Doing another power-button force restart, it comes up to a dark gray cursor
on a black background.
Doing a force restart from here will allow it to boot normally... although,
about 25% of the time when it boots 'normally', it will take me to a CLI login
promt, and then after I log in, it will take me to a GUI login prompt.

When I am finally able to get it rebooted, there is nothing to be
found in the logs that indicate anything was logged at all when it was
sitting at the flashing cursors.

We have 25 W530 and W520 machines, they are all behaving the same way.

lsb_release -rd says
Description: Ubuntu 14.04.2 LTS
Release: 14.04

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-45-generic 3.13.0-45.74
ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13
Uname: Linux 3.13.0-45-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.7
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: greg 2120 F pulseaudio
/dev/snd/controlC0: greg 2120 F pulseaudio
CurrentDesktop: Unity
Date: Fri Feb 20 08:50:49 2015
HibernationDevice: RESUME=UUID=b1125bd3-92e0-466b-b0ef-d9980cf3cac2
InstallationDate: Installed on 2014-12-19 (62 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64
(20140722.2)
MachineType: LENOVO 243852U
ProcFB:

ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic
root=UUID=ad92fac0-fc9d-418e-a38e-1c557b689333 ro quiet splash
RelatedPackageVersions:
linux-restricted-modules-3.13.0-45-generic N/A
linux-backports-modules-3.13.0-45-generic N/A
linux-firmware 1.127.11
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 08/22/2014
dmi.bios.vendor: LENOVO
dmi.bios.version: G5ETA0WW (2.60 )
dmi.board.asset.tag: Not Available
dmi.board.name: 243852U
dmi.board.vendor: LENOVO
dmi.board.version: Win8 Pro DPK TPG
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias:
dmi:bvnLENOVO:bvrG5ETA0WW(2.60):bd08/22/2014:svnLENOVO:pn243852U:pvrThinkPadW530:rvnLENOVO:rn243852U:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 243852U
dmi.product.version: ThinkPad W530
dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423917/+subscriptions

[Kernel-packages] [Bug 1423631] Re: tap interface drops many packets on highload systems

2015-02-20 Thread Serge Hallyn

Please update the bug with system information by doing

apport-collect 1423631


** Also affects: qemu (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: linux (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  New
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  New

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1400411] Re: Feature: cpuidle: Enable fastsleep and winkle in ubuntu 14.04.02 kernel

2015-02-20 Thread Mauricio Faria de Oliveira

Heheh, indeed.
By the way, I reported that issue here a few days ago.
Hopefully the bug mirroring team will get that fixed.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1400411

Title:
  Feature: cpuidle: Enable fastsleep and winkle in ubuntu 14.04.02
  kernel

Status in linux package in Ubuntu:
  Fix Committed
Status in linux source package in Utopic:
  Fix Committed

Bug description:
  SRU Justification:

  [Impact]
  Users would like to be able to use fastsleep and winkle cpuidle states in the 
3.16 Ubuntu kernel when using powernv.

  [Fix]
  commits
  d6a4f70909d279004a2b3d539e240e07b1ecc1cb
  56548fc0e86cb9156af7a7e1f15ba78f251dafaf
  8117ac6a6c2fa0f847ff6a21a1f32c8d2c8501d0
  8eb8ac89a364305d05ad16be983b7890eb462cc3 *backported*
  7cba160ad789a3ad7e68b92bf20eaad6ed171f80 *backported*
  77b54e9f213f76a23736940cf94bcd765fc00f40
  upstream

  [Test Case]
  Testing fastsleep
  -
  With these patches cpuidle framework picks up fastsleep as one of the idle 
states. You can observe the cpus entering fastsleep by checking
  /sys/devices/system/cpu/cpuXX/cpuidle/state2/name. This should show FastSleep.
  Then while system is idle check 
/sys/devices/system/cpu/cpuXX/cpuidle/state2/time increment over time
  This shows the amount of time a particular cpu was in fastsleep.

  Testing Winkle
  --
  With these patches, offline cpus enter winkle. So test this by offlining and 
onlining cpus.
  ppc64_cpu --cores-on=1
  ppc64_cpu --cores-on=X where X is the total number of cores available in the 
machine.

  --

  This is a feature request to enable power management features
  fastsleep and winkle cpuidle states in ubuntu -14.04.02 kernel. The
  cpuidle state management patches have been posted to Linux Kernel
  Community.

  Mailing list:
  [PATCH 0/4] powernv: cpuidle: Redesign idle states management
  https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-November/122433.html

  Patchset:
  [1/4] powerpc: powernv: Switch off MMU before entering nap/sleep/rvwinkle mode
  https://patchwork.ozlabs.org/patch/406249/

  [2/4] powerpc/powernv: Enable Offline CPUs to enter deep idle states
  https://patchwork.ozlabs.org/patch/406250/

  [3/4] powernv: cpuidle: Redesign idle states management
  https://patchwork.ozlabs.org/patch/406256/

  [4/4] powernv: powerpc: Add winkle support for offline cpus
  https://patchwork.ozlabs.org/patch/406251/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400411/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] Missing required logs.

2015-02-20 Thread Brad Figg

This bug is missing log files that will aid in diagnosing the problem.
From a terminal window please run:

apport-collect 1423631

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  New

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1240940] Re: Need support for Realtek Wifi card rtl8723be [10ec:b723]

2015-02-20 Thread Peggys Mouse

No solution but here's the workaround that finally worked for me...
(Ubuntu 14.014 stock kernel)

Download the latest driver (you might have to install git first):
git clone http://github.com/lwfinger/rtlwifi_new.git

Change into the new directory you just created:
cd rtlwifi_new

Compile and install the new driver:
make
sudo make install

Edit the settings for the driver:
echo options rtl8723be fwlps=0 swlps=0 | sudo tee 
/etc/modprobe.d/rtl8723be.conf

It's probably a good idea to take a look at that file to make sure that
worked. Some people say the swlps=0 part of the command above is
unnecessary. I'm not sure but it doesn't seem to be hurting anything.

Reboot.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1240940

Title:
  Need support for Realtek Wifi  card rtl8723be [10ec:b723]

Status in HWE Next Project:
  Fix Released
Status in HWE Next trusty series:
  Fix Released
Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Trusty:
  Fix Released

Bug description:
  This device is appearing in some OEM machines, but driver is not yet
  available upstream.

  This bug is only for the initial support of this WiFi adapter, it's
  not working 100% well yet, please report new not working bug or
  contact upstream but not keep posting comments, thanks.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1240940/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1305335] Re: Cutting or copying files on btrfs to ecryptfs results in data loss

Did this issue start happening after an update/upgrade?  Was there a
prior kernel version where you were not having this particular problem?

Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.19 kernel[0].

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot, 
please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as 
Confirmed.


Thanks in advance.

[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/

** Tags added: kernel-key

** Changed in: linux (Ubuntu)
   Importance: Undecided = High

** Changed in: linux (Ubuntu)
   Importance: High = Critical

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1305335

Title:
  Cutting or copying files on btrfs to ecryptfs results in data loss

Status in eCryptfs:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  I've installed a fresh copy of 14.04 beta 2 on a brand-new SSD.  I
  used btrfs as the filesystem.

  I set up a Private folder usying ecryptfs-setup-private.

  I copied a few folders into the Private folder, and the entire
  directory structure and subfolders are copied, including the files
  themselves, yet every file contains 0 bytes.

  However, I can create and save new files in the Private directory.
  Also, folders and files can be correctly copied if I use the command line cp 
-R.

  Thanks,
  Damon

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: nautilus 1:3.10.1-0ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Apr  9 18:12:56 2014
  EcryptfsInUse: Yes
  GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' 
b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 
'permissions', 'mime_type', 'where']
  InstallationDate: Installed on 2014-04-05 (4 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ecryptfs/+bug/1305335/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Kernel-packages] [Bug 1422853] Re: Desktop freezes unfreezes randomly while doing regular task: Internet Browsing

2015-02-20 Thread Youngsafo

Hello and thank you for your help.

As a novice, I had sort of a hard time understanding the things I should do
in order to successfully complete the bug error. Instead, I have decided to
change my primary OS to windows and run linux via a virtual machine.

Currently I'm saving all important files and haven’t made the switch yet.
If you are very much interested in receiving the bug report I can do my
best to test the latest upstream kernal.

On Tue, Feb 17, 2015 at 6:27 PM, Joseph Salisbury 
joseph.salisb...@canonical.com wrote:

 Would it be possible for you to test the latest upstream kernel? Refer
 to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
 v3.19 kernel[0].

 If this bug is fixed in the mainline kernel, please add the following
 tag 'kernel-fixed-upstream'.

 If the mainline kernel does not fix this bug, please add the tag:
 'kernel-bug-exists-upstream'.

 If you are unable to test the mainline kernel, for example it will not
 boot, please add the tag: 'kernel-unable-to-test-upstream'.
 Once testing of the upstream kernel is complete, please mark this bug as
 Confirmed.


 Thanks in advance.

 [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/

 ** Changed in: linux (Ubuntu)
Importance: Undecided = Medium

 ** Changed in: linux (Ubuntu)
Status: Confirmed = Incomplete

 --
 You received this bug notification because you are subscribed to the bug
 report.
 https://bugs.launchpad.net/bugs/1422853

 Title:
   Desktop freezes  unfreezes randomly while doing regular task:
   Internet Browsing

 Status in linux package in Ubuntu:
   Incomplete

 Bug description:
   I've had this problem for some time and went to an irc channel on
   freenode #ubuntu to reques for help. I was then said to type in
   terminal ubuntu-bug linux-image-generic to submit a bug report.

   ProblemType: Bug
   DistroRelease: Ubuntu 14.04
   Package: linux-image-generic 3.13.0.44.51
   ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12
   Uname: Linux 3.13.0-44-generic x86_64
   NonfreeKernelModules: nvidia
   ApportVersion: 2.14.1-0ubuntu3.5
   Architecture: amd64
   AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1:  wizkidsafo   2557 F pulseaudio
/dev/snd/controlC0:  wizkidsafo   2557 F pulseaudio
/dev/snd/pcmC0D0p:   wizkidsafo   2557 F...m pulseaudio
   CurrentDesktop: Unity
   Date: Tue Feb 17 13:39:30 2015
   HibernationDevice: RESUME=UUID=8fc1f4dd-91a4-41bc-ab59-c5ac523cdc9a
   InstallationDate: Installed on 2014-07-25 (207 days ago)
   InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64
 (20140417)
   IwConfig:
eth0  no wireless extensions.

lono wireless extensions.
   MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
   ProcFB:

   ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-44-generic
 root=/dev/mapper/ubuntu--vg-root ro quiet splash
   RelatedPackageVersions:
linux-restricted-modules-3.13.0-44-generic N/A
linux-backports-modules-3.13.0-44-generic  N/A
linux-firmware 1.127.10
   RfKill:

   SourcePackage: linux
   UpgradeStatus: No upgrade log present (probably fresh install)
   WifiSyslog:

   dmi.bios.date: 08/18/2010
   dmi.bios.vendor: American Megatrends Inc.
   dmi.bios.version: 0405
   dmi.board.asset.tag: To Be Filled By O.E.M.
   dmi.board.name: 120-LF-E650
   dmi.board.vendor: EVGA
   dmi.board.version: Rev 1.xx
   dmi.chassis.asset.tag: To Be Filled By O.E.M.
   dmi.chassis.type: 3
   dmi.chassis.vendor: To Be Filled By O.E.M.
   dmi.chassis.version: To Be Filled By O.E.M.
   dmi.modalias:
 dmi:bvnAmericanMegatrendsInc.:bvr0405:bd08/18/2010:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrRev1.xx:rvnEVGA:rn120-LF-E650:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
   dmi.product.name: To Be Filled By O.E.M.
   dmi.product.version: Rev 1.xx
   dmi.sys.vendor: To Be Filled By O.E.M.

 To manage notifications about this bug go to:
 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1422853/+subscriptions


-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1422853

Title:
  Desktop freezes  unfreezes randomly while doing regular task:
  Internet Browsing

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I've had this problem for some time and went to an irc channel on
  freenode #ubuntu to reques for help. I was then said to type in
  terminal ubuntu-bug linux-image-generic to submit a bug report.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-generic 3.13.0.44.51
  ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12
  Uname: Linux 3.13.0-44-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  wizkidsafo   2557 F pulseaudio

[Kernel-packages] [Bug 1305335] Re: Cutting or copying files on btrfs to ecryptfs results in data loss

2015-02-20 Thread lunomad

Hi Joseph,

This bug freaked me out so much I re-formatted to EXT4 and started over.
I don't have a system that I can test this on now.

The bug appeared on a completely fresh install of 14.04 beta 2 and the
bug was still present in the release.

Unfortunately, I never had any experience with BTRFS prior so I can't
tell you how it worked before.  As I recall, I had success doing copies
via the terminal command line using CP -R, so I assumed the bug was in
how nautilus handled file copies.  My experience also was that once I
got a file INTO the private directory, I was able to open, edit, and
save correctly without error.

Still, the whole thing sent shivers up my spine, and I'm not as
technically-abled as others on this bug. I had to dump BTRFS as soon as
I could.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1305335

Title:
  Cutting or copying files on btrfs to ecryptfs results in data loss

Status in eCryptfs:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  I've installed a fresh copy of 14.04 beta 2 on a brand-new SSD.  I
  used btrfs as the filesystem.

  I set up a Private folder usying ecryptfs-setup-private.

  I copied a few folders into the Private folder, and the entire
  directory structure and subfolders are copied, including the files
  themselves, yet every file contains 0 bytes.

  However, I can create and save new files in the Private directory.
  Also, folders and files can be correctly copied if I use the command line cp 
-R.

  Thanks,
  Damon

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: nautilus 1:3.10.1-0ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Apr  9 18:12:56 2014
  EcryptfsInUse: Yes
  GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' 
b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 
'permissions', 'mime_type', 'where']
  InstallationDate: Installed on 2014-04-05 (4 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ecryptfs/+bug/1305335/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1305335] Re: Cutting or copying files on btrfs to ecryptfs results in data loss

Also, just to confirm, this issue only happens if you copy the files
using Nautilus?  It does not happen if you copy from a terminal?

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1305335

Title:
  Cutting or copying files on btrfs to ecryptfs results in data loss

Status in eCryptfs:
  Confirmed
Status in linux package in Ubuntu:
  Confirmed
Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  I've installed a fresh copy of 14.04 beta 2 on a brand-new SSD.  I
  used btrfs as the filesystem.

  I set up a Private folder usying ecryptfs-setup-private.

  I copied a few folders into the Private folder, and the entire
  directory structure and subfolders are copied, including the files
  themselves, yet every file contains 0 bytes.

  However, I can create and save new files in the Private directory.
  Also, folders and files can be correctly copied if I use the command line cp 
-R.

  Thanks,
  Damon

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: nautilus 1:3.10.1-0ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-23.45-generic 3.13.8
  Uname: Linux 3.13.0-23-generic x86_64
  ApportVersion: 2.14.1-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Apr  9 18:12:56 2014
  EcryptfsInUse: Yes
  GsettingsChanges: b'org.gnome.nautilus.list-view' b'default-column-order' 
b['name', 'size', 'type', 'date_modified', 'date_accessed', 'owner', 'group', 
'permissions', 'mime_type', 'where']
  InstallationDate: Installed on 2014-04-05 (4 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ecryptfs/+bug/1305335/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1400411] Re: Feature: cpuidle: Enable fastsleep and winkle in ubuntu 14.04.02 kernel

Looks like bugproxy really doesn't like that tag. : )

** Tags added: verification-done-utopic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1400411

Title:
  Feature: cpuidle: Enable fastsleep and winkle in ubuntu 14.04.02
  kernel

Status in linux package in Ubuntu:
  Fix Committed
Status in linux source package in Utopic:
  Fix Committed

Bug description:
  SRU Justification:

  [Impact]
  Users would like to be able to use fastsleep and winkle cpuidle states in the 
3.16 Ubuntu kernel when using powernv.

  [Fix]
  commits
  d6a4f70909d279004a2b3d539e240e07b1ecc1cb
  56548fc0e86cb9156af7a7e1f15ba78f251dafaf
  8117ac6a6c2fa0f847ff6a21a1f32c8d2c8501d0
  8eb8ac89a364305d05ad16be983b7890eb462cc3 *backported*
  7cba160ad789a3ad7e68b92bf20eaad6ed171f80 *backported*
  77b54e9f213f76a23736940cf94bcd765fc00f40
  upstream

  [Test Case]
  Testing fastsleep
  -
  With these patches cpuidle framework picks up fastsleep as one of the idle 
states. You can observe the cpus entering fastsleep by checking
  /sys/devices/system/cpu/cpuXX/cpuidle/state2/name. This should show FastSleep.
  Then while system is idle check 
/sys/devices/system/cpu/cpuXX/cpuidle/state2/time increment over time
  This shows the amount of time a particular cpu was in fastsleep.

  Testing Winkle
  --
  With these patches, offline cpus enter winkle. So test this by offlining and 
onlining cpus.
  ppc64_cpu --cores-on=1
  ppc64_cpu --cores-on=X where X is the total number of cores available in the 
machine.

  --

  This is a feature request to enable power management features
  fastsleep and winkle cpuidle states in ubuntu -14.04.02 kernel. The
  cpuidle state management patches have been posted to Linux Kernel
  Community.

  Mailing list:
  [PATCH 0/4] powernv: cpuidle: Redesign idle states management
  https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-November/122433.html

  Patchset:
  [1/4] powerpc: powernv: Switch off MMU before entering nap/sleep/rvwinkle mode
  https://patchwork.ozlabs.org/patch/406249/

  [2/4] powerpc/powernv: Enable Offline CPUs to enter deep idle states
  https://patchwork.ozlabs.org/patch/406250/

  [3/4] powernv: cpuidle: Redesign idle states management
  https://patchwork.ozlabs.org/patch/406256/

  [4/4] powernv: powerpc: Add winkle support for offline cpus
  https://patchwork.ozlabs.org/patch/406251/

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1400411/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1424058] [NEW] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]

2015-02-20 Thread ventrical

Public bug reported:

This appears to be part of a superbug set [all variants] that inlcudes
nouveau-firmware and the new kernels.  Rebooting from live or hard
install will  shutdown and lock PC and KVM hardware. Also workspace
switcher will not function properly in live mode.

ProblemType: KernelOops
DistroRelease: Ubuntu 15.04
Package: linux-image-3.18.0-13-generic 3.18.0-13.14 [modified: 
boot/vmlinuz-3.18.0-13-generic]
ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5
Uname: Linux 3.18.0-13-generic x86_64
Annotation: Your system might become unstablenow and might need to be restarted.
ApportVersion: 2.16.1-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  ventrical   1986 F pulseaudio
Date: Fri Feb 20 11:22:29 2015
Failure: oops
HibernationDevice: RESUME=UUID=ce424a7c-5513-403b-9787-65385e1bb31a
InstallationDate: Installed on 2015-02-20 (0 days ago)
InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150219)
IwConfig:
 eth0  no wireless extensions.
 
 lono wireless extensions.
MachineType: System manufacturer System Product Name
ProcFB: 0 nouveaufb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-13-generic 
root=UUID=a84a80c3-21c2-4782-96df-c49d1e9115f1 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8
RfKill:
 
SourcePackage: linux
Title: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/15/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1807
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P5B-E
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1807:bd04/15/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5B-E:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-kerneloops kernel-oops vivid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1424058

Title:
  NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]

Status in linux package in Ubuntu:
  New

Bug description:
  This appears to be part of a superbug set [all variants] that inlcudes
  nouveau-firmware and the new kernels.  Rebooting from live or hard
  install will  shutdown and lock PC and KVM hardware. Also workspace
  switcher will not function properly in live mode.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.18.0-13-generic 3.18.0-13.14 [modified: 
boot/vmlinuz-3.18.0-13-generic]
  ProcVersionSignature: Ubuntu 3.18.0-13.14-generic 3.18.5
  Uname: Linux 3.18.0-13-generic x86_64
  Annotation: Your system might become unstablenow and might need to be 
restarted.
  ApportVersion: 2.16.1-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ventrical   1986 F pulseaudio
  Date: Fri Feb 20 11:22:29 2015
  Failure: oops
  HibernationDevice: RESUME=UUID=ce424a7c-5513-403b-9787-65385e1bb31a
  InstallationDate: Installed on 2015-02-20 (0 days ago)
  InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150219)
  IwConfig:
   eth0  no wireless extensions.
   
   lono wireless extensions.
  MachineType: System manufacturer System Product Name
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-13-generic 
root=UUID=a84a80c3-21c2-4782-96df-c49d1e9115f1 ro quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8
  RfKill:
   
  SourcePackage: linux
  Title: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [Xorg:1334]
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/15/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1807
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: P5B-E
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias:

[Kernel-packages] [Bug 1307744] Re: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module failed to build [error: too few arguments to function ‘cfg80211_ibss_joined’]

2015-02-20 Thread W. Milszus

Solution from #4 works on the new occurence 14.04.2 LTS, too.
You have to change the target kernel name  3.15.0-031500rc1-generic  to 
3.16.0-30-generic and proceed.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1307744

Title:
  bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module
  failed to build [error: too few arguments to function
  ‘cfg80211_ibss_joined’]

Status in bcmwl package in Ubuntu:
  Fix Released

Bug description:
  installation of the kernel 3.15-RC1 on trusty...

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.14.1-0ubuntu2
  Architecture: amd64
  DKMSKernelVersion: 3.15.0-031500rc1-generic
  Date: Tue Apr 15 01:19:44 2014
  DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function ‘cfg80211_ibss_joined’
  InstallationDate: Installed on 2014-04-13 (1 days ago)
  InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  PackageVersion: 6.30.223.141+bdcom-0ubuntu2
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1307744/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1307744] Re: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module failed to build [error: too few arguments to function ‘cfg80211_ibss_joined’]

Thanks W. Milszus, It works like a charm.

Keeping it simple, i've followed those steps to solve the problem:

1. Replace the file
/usr/src/bcmwl-6.30.223.141+bdcom/src/wl/sys/wl_cfg80211_hybrid.c with
this one:
https://gist.githubusercontent.com/xezpeleta/b6b13a70ad70c7c22128/raw/88c66b974022a5f9f0770f35f5bb886c2c975961/wl_cfg80211_hybrid.c

2. Run this command: sudo dpkg-reconfigure bcmwl-kernel-source

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1307744

Title:
  bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module
  failed to build [error: too few arguments to function
  ‘cfg80211_ibss_joined’]

Status in bcmwl package in Ubuntu:
  Fix Released

Bug description:
  installation of the kernel 3.15-RC1 on trusty...

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.14.1-0ubuntu2
  Architecture: amd64
  DKMSKernelVersion: 3.15.0-031500rc1-generic
  Date: Tue Apr 15 01:19:44 2014
  DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function ‘cfg80211_ibss_joined’
  InstallationDate: Installed on 2014-04-13 (1 days ago)
  InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  PackageVersion: 6.30.223.141+bdcom-0ubuntu2
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1307744/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] UdevDb.txt

apport information

** Attachment added: UdevDb.txt
   https://bugs.launchpad.net/bugs/1423631/+attachment/4323633/+files/UdevDb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] IwConfig.txt

apport information

** Attachment added: IwConfig.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323627/+files/IwConfig.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] Re: tap interface drops many packets on highload systems

apport information

** Tags added: apport-collected trusty

** Description changed:

  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...
  
  Network domin config:
  
  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface
  
  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
+ --- 
+ AlsaDevices:
+  total 0
+  crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
+  crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
+ AplayDevices: Error: [Errno 2] No such file or directory
+ ApportVersion: 2.14.1-0ubuntu3.7
+ Architecture: amd64
+ ArecordDevices: Error: [Errno 2] No such file or directory
+ AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
+ CRDA: Error: [Errno 2] No such file or directory
+ DistroRelease: Ubuntu 14.04
+ InstallationDate: Installed on 2014-07-01 (234 days ago)
+ InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
+ MachineType: Dell Inc. PowerEdge M620
+ Package: qemu-kvm
+ PciMultimedia:
+  
+ ProcEnviron:
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=en_US.UTF-8
+  LC_MESSAGES=en_US.UTF-8
+  SHELL=/bin/bash
+ ProcFB: 0 VESA VGA
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
+ ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
+ RelatedPackageVersions:
+  linux-restricted-modules-3.16.0-30-generic N/A
+  linux-backports-modules-3.16.0-30-generic  N/A
+  linux-firmware 1.127.11
+ RfKill: Error: [Errno 2] No such file or directory
+ Tags:  trusty
+ Uname: Linux 3.16.0-30-generic x86_64
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups:
+  
+ _MarkForUpload: True
+ dmi.bios.date: 01/21/2014
+ dmi.bios.vendor: Dell Inc.
+ dmi.bios.version: 2.2.7
+ dmi.board.name: 0T36VK
+ dmi.board.vendor: Dell Inc.
+ dmi.board.version: A01
+ dmi.chassis.type: 25
+ dmi.chassis.vendor: Dell Inc.
+ dmi.chassis.version: PowerEdge M1000e
+ dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
+ dmi.product.name: PowerEdge M620
+ dmi.sys.vendor: Dell Inc.

** Attachment added: BootDmesg.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323625/+files/BootDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error:

[Kernel-packages] [Bug 1423631] UdevLog.txt

apport information

** Attachment added: UdevLog.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323634/+files/UdevLog.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] Lsusb.txt

apport information

** Attachment added: Lsusb.txt
   https://bugs.launchpad.net/bugs/1423631/+attachment/4323629/+files/Lsusb.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] CurrentDmesg.txt

apport information

** Attachment added: CurrentDmesg.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323626/+files/CurrentDmesg.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] ProcCpuinfo.txt

apport information

** Attachment added: ProcCpuinfo.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323630/+files/ProcCpuinfo.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423631] WifiSyslog.txt

apport information

** Attachment added: WifiSyslog.txt
   
https://bugs.launchpad.net/bugs/1423631/+attachment/4323635/+files/WifiSyslog.txt

** Changed in: qemu-kvm (Ubuntu)
   Status: New = Incomplete

** Changed in: qemu-kvm (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423631

Title:
  tap interface drops many packets on highload systems

Status in linux package in Ubuntu:
  Incomplete
Status in qemu package in Ubuntu:
  New
Status in qemu-kvm package in Ubuntu:
  Confirmed

Bug description:
  I use qemu-kvm in openstak. On highload hypervisor tap interface of 
net-highload gues drops many TX packages.
  Network options of qemu-system-x86_64  ... -netdev 
tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device 
virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:86:67:7b,bus=pci.0,addr=0x3...

  Network domin config:

  interface type='bridge'
mac address='fa:16:3e:86:67:7b'/
source bridge='qbre4009073-0b'/
target dev='tape4009073-0b'/
model type='virtio'/
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03' 
function='0x0'/
  /interface

  tape4009073-0b Link encap:Ethernet  HWaddr fe:16:3e:86:67:7b  
inet6 addr: fe80::fc16:3eff:fe86:677b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:1587622634 errors:0 dropped:0 overruns:0 frame:0
TX packets:1484106438 errors:0 dropped:460259 overruns:0 carrier:0
collisions:0 txqueuelen:500 
RX bytes:877878711500 (877.8 GB)  TX bytes:3071846828531 (3.0 TB)
  --- 
  AlsaDevices:
   total 0
   crw-rw 1 root audio 116,  1 Feb 18 12:06 seq
   crw-rw 1 root audio 116, 33 Feb 18 12:06 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-07-01 (234 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  MachineType: Dell Inc. PowerEdge M620
  Package: qemu-kvm
  PciMultimedia:
   
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   LC_MESSAGES=en_US.UTF-8
   SHELL=/bin/bash
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic 
root=UUID=5965239d-820a-49a1-9d8e-23a4c1f87ce6 ro
  ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-30-generic N/A
   linux-backports-modules-3.16.0-30-generic  N/A
   linux-firmware 1.127.11
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.16.0-30-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 01/21/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.2.7
  dmi.board.name: 0T36VK
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 25
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: PowerEdge M1000e
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.2.7:bd01/21/2014:svnDellInc.:pnPowerEdgeM620:pvr:rvnDellInc.:rn0T36VK:rvrA01:cvnDellInc.:ct25:cvrPowerEdgeM1000e:
  dmi.product.name: PowerEdge M620
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423631/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1307744] Re: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module failed to build [error: too few arguments to function ‘cfg80211_ibss_joined’]

Here more info:

user@myhost:~$ sudo dpkg-reconfigure bcmwl-kernel-source
Removing all DKMS Modules
Done.
Loading new bcmwl-6.30.223.141+bdcom DKMS files...
Building only for 3.16.0-30-generic
Building for architecture x86_64
Building initial module for 3.16.0-30-generic
Error! Bad return status for module build on kernel: 3.16.0-30-generic (x86_64)
Consult /var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/make.log for more 
information.
modprobe: FATAL: Module wl not found.
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools (0.103ubuntu4.2) ...
update-initramfs: Generating /boot/initrd.img-3.16.0-30-generic

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1307744

Title:
  bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module
  failed to build [error: too few arguments to function
  ‘cfg80211_ibss_joined’]

Status in bcmwl package in Ubuntu:
  Fix Released

Bug description:
  installation of the kernel 3.15-RC1 on trusty...

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.14.1-0ubuntu2
  Architecture: amd64
  DKMSKernelVersion: 3.15.0-031500rc1-generic
  Date: Tue Apr 15 01:19:44 2014
  DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function ‘cfg80211_ibss_joined’
  InstallationDate: Installed on 2014-04-13 (1 days ago)
  InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  PackageVersion: 6.30.223.141+bdcom-0ubuntu2
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1307744/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1423917] Re: System hangs when screen closed

2015-02-20 Thread snurfle

Been doing it for about 4 weeks, not really sure exactly what caused it
to start.

Upstream kernel did not change anything, except for complaining about
the nvidia driver bug.


** Changed in: linux (Ubuntu)
   Status: Incomplete = Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1423917

Title:
  System hangs when screen closed

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  If I close the screen on my laptop (Thinkpad W530) the system will freeze.
  Nothing functions at all, including reisub.
  However, the fn/space bar still turns the keyboard backlight on / off; that 
is working perfectly.
  The volume / must buttons still toggle the 'mute' led on/off.
  But the screen is frozen, the power button must be held for 5 seconds to 
power down the system.
  There is noting in the logs to indicate anything at all happens after the 
system hangs, they just... stop.

  After doing a hard boot, the system comes back up to grub, and then to a 
flashing white cursor on a black background.  I've left it at this screen for 
45 minutes, and it goes no further.
  Doing another power-button force restart, it comes up to a dark gray cursor 
on a black background.
  Doing a force restart from here will allow it to boot normally...  although, 
about 25% of the time when it boots 'normally', it will take me to a CLI login 
promt, and then after I log in, it will take me to a GUI login prompt.

  When I am finally able to get it rebooted, there is nothing to be
  found in the logs that indicate anything was logged at all when it was
  sitting at the flashing cursors.

  We have 25 W530 and W520 machines, they are all behaving the same way.

  lsb_release -rd says 
  Description:  Ubuntu 14.04.2 LTS
  Release:  14.04

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-45-generic 3.13.0-45.74
  ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13
  Uname: Linux 3.13.0-45-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.7
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  greg   2120 F pulseaudio
   /dev/snd/controlC0:  greg   2120 F pulseaudio
  CurrentDesktop: Unity
  Date: Fri Feb 20 08:50:49 2015
  HibernationDevice: RESUME=UUID=b1125bd3-92e0-466b-b0ef-d9980cf3cac2
  InstallationDate: Installed on 2014-12-19 (62 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  MachineType: LENOVO 243852U
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-45-generic 
root=UUID=ad92fac0-fc9d-418e-a38e-1c557b689333 ro quiet splash
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-45-generic N/A
   linux-backports-modules-3.13.0-45-generic  N/A
   linux-firmware 1.127.11
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/22/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: G5ETA0WW (2.60 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 243852U
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 Pro DPK TPG
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrG5ETA0WW(2.60):bd08/22/2014:svnLENOVO:pn243852U:pvrThinkPadW530:rvnLENOVO:rn243852U:rvrWin8ProDPKTPG:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 243852U
  dmi.product.version: ThinkPad W530
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1423917/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Kernel-packages] [Bug 1422853] Re: Desktop freezes unfreezes randomly while doing regular task: Internet Browsing

2015-02-20 Thread Youngsafo

I was able to test the latest upstream Kernal. It was submitted

On Fri, Feb 20, 2015 at 12:29 PM, Wizkid Safo youngs...@gmail.com
wrote:

 Hello and thank you for your help.

 As a novice, I had sort of a hard time understanding the things I should
 do in order to successfully complete the bug error. Instead, I have decided
 to change my primary OS to windows and run linux via a virtual machine.

 Currently I'm saving all important files and haven’t made the switch yet.
 If you are very much interested in receiving the bug report I can do my
 best to test the latest upstream kernal.

 On Tue, Feb 17, 2015 at 6:27 PM, Joseph Salisbury 
 joseph.salisb...@canonical.com wrote:

 Would it be possible for you to test the latest upstream kernel? Refer
 to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
 v3.19 kernel[0].

 If this bug is fixed in the mainline kernel, please add the following
 tag 'kernel-fixed-upstream'.

 If the mainline kernel does not fix this bug, please add the tag:
 'kernel-bug-exists-upstream'.

 If you are unable to test the mainline kernel, for example it will not
 boot, please add the tag: 'kernel-unable-to-test-upstream'.
 Once testing of the upstream kernel is complete, please mark this bug as
 Confirmed.


 Thanks in advance.

 [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/

 ** Changed in: linux (Ubuntu)
Importance: Undecided = Medium

 ** Changed in: linux (Ubuntu)
Status: Confirmed = Incomplete

 --
 You received this bug notification because you are subscribed to the bug
 report.
 https://bugs.launchpad.net/bugs/1422853

 Title:
   Desktop freezes  unfreezes randomly while doing regular task:
   Internet Browsing

 Status in linux package in Ubuntu:
   Incomplete

 Bug description:
   I've had this problem for some time and went to an irc channel on
   freenode #ubuntu to reques for help. I was then said to type in
   terminal ubuntu-bug linux-image-generic to submit a bug report.

   ProblemType: Bug
   DistroRelease: Ubuntu 14.04
   Package: linux-image-generic 3.13.0.44.51
   ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12
   Uname: Linux 3.13.0-44-generic x86_64
   NonfreeKernelModules: nvidia
   ApportVersion: 2.14.1-0ubuntu3.5
   Architecture: amd64
   AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1:  wizkidsafo   2557 F pulseaudio
/dev/snd/controlC0:  wizkidsafo   2557 F pulseaudio
/dev/snd/pcmC0D0p:   wizkidsafo   2557 F...m pulseaudio
   CurrentDesktop: Unity
   Date: Tue Feb 17 13:39:30 2015
   HibernationDevice: RESUME=UUID=8fc1f4dd-91a4-41bc-ab59-c5ac523cdc9a
   InstallationDate: Installed on 2014-07-25 (207 days ago)
   InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64
 (20140417)
   IwConfig:
eth0  no wireless extensions.

lono wireless extensions.
   MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
   ProcFB:

   ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-44-generic
 root=/dev/mapper/ubuntu--vg-root ro quiet splash
   RelatedPackageVersions:
linux-restricted-modules-3.13.0-44-generic N/A
linux-backports-modules-3.13.0-44-generic  N/A
linux-firmware 1.127.10
   RfKill:

   SourcePackage: linux
   UpgradeStatus: No upgrade log present (probably fresh install)
   WifiSyslog:

   dmi.bios.date: 08/18/2010
   dmi.bios.vendor: American Megatrends Inc.
   dmi.bios.version: 0405
   dmi.board.asset.tag: To Be Filled By O.E.M.
   dmi.board.name: 120-LF-E650
   dmi.board.vendor: EVGA
   dmi.board.version: Rev 1.xx
   dmi.chassis.asset.tag: To Be Filled By O.E.M.
   dmi.chassis.type: 3
   dmi.chassis.vendor: To Be Filled By O.E.M.
   dmi.chassis.version: To Be Filled By O.E.M.
   dmi.modalias:
 dmi:bvnAmericanMegatrendsInc.:bvr0405:bd08/18/2010:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrRev1.xx:rvnEVGA:rn120-LF-E650:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
   dmi.product.name: To Be Filled By O.E.M.
   dmi.product.version: Rev 1.xx
   dmi.sys.vendor: To Be Filled By O.E.M.

 To manage notifications about this bug go to:

 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1422853/+subscriptions




-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1422853

Title:
  Desktop freezes  unfreezes randomly while doing regular task:
  Internet Browsing

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I've had this problem for some time and went to an irc channel on
  freenode #ubuntu to reques for help. I was then said to type in
  terminal ubuntu-bug linux-image-generic to submit a bug report.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-generic 3.13.0.44.51
  ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12
  Uname: Linux 3.13.0-44-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion:

[Kernel-packages] [Bug 1358226] Re: kernel and lockd xprt_adjust_timeout rq_timeout

It looks like the fix for this bug is in mainline as of 3.19-rc5:

06bed7d LOCKD: Fix a race when initialising nlmsvc_timeout

git describe --contains 06bed7d
v3.19-rc5~13^2~5

The fix was also cc'd to stable, and it is working it's way through the stable 
releases.  It has made it's way into the linux-3.13.y-queue branch of the 
upstream 3.13 kernel:
1185361 LOCKD: Fix a race when initialising nlmsvc_timeout

Trusty will pick up this fix when it gets the 3.13 upstream updates.

** Also affects: linux (Ubuntu Trusty)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu Trusty)
   Status: New = Triaged

** Changed in: linux (Ubuntu Trusty)
   Importance: Undecided = Medium

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1358226

Title:
  kernel and lockd xprt_adjust_timeout rq_timeout

Status in linux package in Ubuntu:
  Triaged
Status in linux source package in Trusty:
  Triaged

Bug description:
  I am seeing the following messages in syslog. There are no other
  messages around that time to suggest why it is happening.

  Aug 18 11:01:16 hostname kernel: [943559.414398] xprt_adjust_timeout: 
rq_timeout = 0!
  Aug 18 11:01:16 hostname kernel: [943559.414401] lockd: server nfs_server not 
responding, still trying
  Aug 18 11:01:16 hostname kernel: [943559.415347] lockd: server nfs_server OK

  System is:
  Linux hostname 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 
x86_64 x86_64 x86_64 GNU/Linux
  Ubuntu 14.04.1 LTS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1358226/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1390764] Re: Display remains fully dimmed after resume from suspend

2015-02-20 Thread Michael Steffens

Kernel 3.19.0-031900-generic boots fine, but doesn fix the issue,
either.

** Changed in: linux (Ubuntu)
   Status: Incomplete = Confirmed

** Tags added: kernel-bug-exists-upstream kernel-bug-exists-
upstream-3.19.0-031900

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1390764

Title:
  Display remains fully dimmed after resume from suspend

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  After resuming from suspend the display returns fully dimmed, and
  display brightness can't be adjusted, neither using FN keys, nor using
  KDE power management control. The issue occurs regardless whether the
  suspend state was activated by low battery, by closing the display, or
  by explicitly selecting sleep mode in KDE. Killing and restarting  X
  does not solve the problem. A reboot does.

  ---
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: michael 2554 
F pulseaudio michael 2784 F pulseaudio CRDA: Error: [Errno 2] No such 
file or directory
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=8dc81a6f-65e9-443d-b850-0f62a1ca52c4 
InstallationDate: Installed on 2012-05-13 (909 days ago)
  InstallationMedia: Kubuntu 12.04 LTS Precise Pangolin - Release amd64 
(20120424)
  MachineType: Hewlett-Packard HP EliteBook 8530w
  Package: linux (not installed)
  PccardctlStatus: Socket 0: 3.3V 16-bit PC Card Subdevice 0 (function 0) bound 
to driver pata_pcmcia
  ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) 
LANG=en_US.UTF-8 SHELL=/bin/bash
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-39-generic 
root=/dev/mapper/vg00-lv_root ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon. 
  RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A 
linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.7
  Tags: trusty
  Uname: Linux 3.13.0-39-generic x86_64
  UpgradeStatus: Upgraded to trusty on 2014-05-10 (181 days ago)
  UserGroups: _MarkForUpload: True
  dmi.bios.date: 06/24/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 68PDV Ver. F.0C
  dmi.board.name: 30E7
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: KBC Version 90.23
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr68PDVVer.F.0C:bd06/24/2009:svnHewlett-Packard:pnHPEliteBook8530w:pvrF.0C:rvnHewlett-Packard:rn30E7:rvrKBCVersion90.23:cvnHewlett-Packard:ct10:cvr:
 
  dmi.product.name: HP EliteBook 8530w
  dmi.product.version: F.0C
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1390764/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1307744] Re: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module failed to build [error: too few arguments to function ‘cfg80211_ibss_joined’]

Same problem here in a fresh Ubuntu 14.04.2 LTS installation. I can't
see the wireless interface.

Kernel 3.16.0-30-generic
bcmwl-kernel-source 6.30.223.141

What can I do?

Thanks in advance

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1307744

Title:
  bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module
  failed to build [error: too few arguments to function
  ‘cfg80211_ibss_joined’]

Status in bcmwl package in Ubuntu:
  Fix Released

Bug description:
  installation of the kernel 3.15-RC1 on trusty...

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.14.1-0ubuntu2
  Architecture: amd64
  DKMSKernelVersion: 3.15.0-031500rc1-generic
  Date: Tue Apr 15 01:19:44 2014
  DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function ‘cfg80211_ibss_joined’
  InstallationDate: Installed on 2014-04-13 (1 days ago)
  InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  PackageVersion: 6.30.223.141+bdcom-0ubuntu2
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1307744/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1307744] Re: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module failed to build [error: too few arguments to function ‘cfg80211_ibss_joined’]

I also attach make.log file



** Attachment added: make.log
   
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1307744/+attachment/4323445/+files/make.log

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bcmwl in Ubuntu.
https://bugs.launchpad.net/bugs/1307744

Title:
  bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module
  failed to build [error: too few arguments to function
  ‘cfg80211_ibss_joined’]

Status in bcmwl package in Ubuntu:
  Fix Released

Bug description:
  installation of the kernel 3.15-RC1 on trusty...

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.14.1-0ubuntu2
  Architecture: amd64
  DKMSKernelVersion: 3.15.0-031500rc1-generic
  Date: Tue Apr 15 01:19:44 2014
  DuplicateSignature: 
dkms:bcmwl-kernel-source:6.30.223.141+bdcom-0ubuntu2:/var/lib/dkms/bcmwl/6.30.223.141+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:1844:4:
 error: too few arguments to function ‘cfg80211_ibss_joined’
  InstallationDate: Installed on 2014-04-13 (1 days ago)
  InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326)
  PackageVersion: 6.30.223.141+bdcom-0ubuntu2
  SourcePackage: bcmwl
  Title: bcmwl-kernel-source 6.30.223.141+bdcom-0ubuntu2: bcmwl kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1307744/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1416277] Re: toshiba_acpi: Unknown key 158

2015-02-20 Thread Enzo

I've tested the Vivid kernel and works fine in my Satellite L845. I'll
try to test the Mainline later.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1416277

Title:
  toshiba_acpi: Unknown key 158

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  If I press the wireless key (see attached image) on my Toshiba P50W I
  get the following error in dmesg:

  toshiba_acpi: Unknown key 158

  I'd expect this key to toggle flight mode.
  --- 
  ApportVersion: 2.15.1-0ubuntu4
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bob2980 F pulseaudio
   /dev/snd/controlC1:  bob2980 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.04
  HibernationDevice: RESUME=UUID=5033984a-21af-482d-a1fd-c075e818cd12
  InstallationDate: Installed on 2013-12-26 (400 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  MachineType: TOSHIBA Satellite P50W-B
  NonfreeKernelModules: wl
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.18.0-11-generic 
root=UUID=885f0f10-b818-4eb4-8ff4-d067e16bef2f ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.18.0-11.12-generic 3.18.3
  RelatedPackageVersions:
   linux-restricted-modules-3.18.0-11-generic N/A
   linux-backports-modules-3.18.0-11-generic  N/A
   linux-firmware 1.141
  Tags:  vivid
  Uname: Linux 3.18.0-11-generic x86_64
  UpgradeStatus: Upgraded to vivid on 2013-12-26 (400 days ago)
  UserGroups: adm autopilot cdrom dip libvirtd lpadmin netdev plugdev 
sambashare sudo wireshark
  _MarkForUpload: True
  dmi.bios.date: 08/08/2014
  dmi.bios.vendor: INSYDE Corp.
  dmi.bios.version: 1.40
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: Type2 - Board Product Name1
  dmi.board.vendor: Type2 - Board Vendor Name1
  dmi.board.version: Type2 - Board Version
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: OEM Chassis ManuFacturer
  dmi.chassis.version: OEM Chassis Version
  dmi.modalias: 
dmi:bvnINSYDECorp.:bvr1.40:bd08/08/2014:svnTOSHIBA:pnSatelliteP50W-B:pvrPSVP2A-00F002:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManuFacturer:ct10:cvrOEMChassisVersion:
  dmi.product.name: Satellite P50W-B
  dmi.product.version: PSVP2A-00F002
  dmi.sys.vendor: TOSHIBA

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1416277/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1348007] Re: xhci_hcd: Setup ERROR: setup context command for slot n.

2015-02-20 Thread Awesome Donkey

Still happening to me with 3.19 final.

Feb 20 12:33:26 Ubuntu kernel: [0.822414] ahci :06:00.0: SSS flag set, 
parallel bus scan disabled
Feb 20 12:33:26 Ubuntu kernel: [0.822461] ahci :06:00.0: AHCI 0001.0200 
32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Feb 20 12:33:26 Ubuntu kernel: [0.822463] ahci :06:00.0: flags: 64bit 
ncq sntf stag led clo pmp pio slum part ccc 
Feb 20 12:33:26 Ubuntu kernel: [0.822646] scsi host6: ahci
Feb 20 12:33:26 Ubuntu kernel: [0.822712] scsi host7: ahci
Feb 20 12:33:26 Ubuntu kernel: [0.822740] ata7: SATA max UDMA/133 abar 
m512@0xdfd0 port 0xdfd00100 irq 42
Feb 20 12:33:26 Ubuntu kernel: [0.822742] ata8: SATA max UDMA/133 abar 
m512@0xdfd0 port 0xdfd00180 irq 42
Feb 20 12:33:26 Ubuntu kernel: [0.822836] ahci :0a:00.0: SSS flag set, 
parallel bus scan disabled
Feb 20 12:33:26 Ubuntu kernel: [0.822863] ahci :0a:00.0: AHCI 0001.0200 
32 slots 2 ports 6 Gbps 0x3 impl SATA mode
Feb 20 12:33:26 Ubuntu kernel: [0.822864] ahci :0a:00.0: flags: 64bit 
ncq sntf stag led clo pmp pio slum part ccc 
Feb 20 12:33:26 Ubuntu kernel: [0.823042] scsi host8: ahci
Feb 20 12:33:26 Ubuntu kernel: [0.823106] scsi host9: ahci
Feb 20 12:33:26 Ubuntu kernel: [0.823131] ata9: SATA max UDMA/133 abar 
m512@0xdfc0 port 0xdfc00100 irq 43
Feb 20 12:33:26 Ubuntu kernel: [0.823133] ata10: SATA max UDMA/133 abar 
m512@0xdfc0 port 0xdfc00180 irq 43
Feb 20 12:33:26 Ubuntu kernel: [0.841369] usb 1-1: new high-speed USB 
device number 2 using xhci_hcd
Feb 20 12:33:26 Ubuntu kernel: [0.841384] xhci_hcd :00:14.0: ERROR: 
unexpected setup address command completion code 0x0.
Feb 20 12:33:26 Ubuntu kernel: [0.909474] usb 5-1: new high-speed USB 
device number 2 using ehci-pci
Feb 20 12:33:26 Ubuntu kernel: [0.925498] usb 6-1: new high-speed USB 
device number 2 using ehci-pci
Feb 20 12:33:26 Ubuntu kernel: [1.042006] usb 5-1: New USB device found, 
idVendor=8087, idProduct=8009
Feb 20 12:33:26 Ubuntu kernel: [1.042008] usb 5-1: New USB device strings: 
Mfr=0, Product=0, SerialNumber=0
Feb 20 12:33:26 Ubuntu kernel: [1.042145] hub 5-1:1.0: USB hub found
Feb 20 12:33:26 Ubuntu kernel: [1.042255] hub 5-1:1.0: 6 ports detected
Feb 20 12:33:26 Ubuntu kernel: [1.049688] xhci_hcd :00:14.0: Setup 
ERROR: setup address command for slot 1.
Feb 20 12:33:26 Ubuntu kernel: [1.058042] usb 6-1: New USB device found, 
idVendor=8087, idProduct=8001
Feb 20 12:33:26 Ubuntu kernel: [1.058044] usb 6-1: New USB device strings: 
Mfr=0, Product=0, SerialNumber=0
Feb 20 12:33:26 Ubuntu kernel: [1.058181] hub 6-1:1.0: USB hub found
Feb 20 12:33:26 Ubuntu kernel: [1.058291] hub 6-1:1.0: 8 ports detected
Feb 20 12:33:26 Ubuntu kernel: [1.063026] usb 1-1: New USB device found, 
idVendor=174c, idProduct=2074
Feb 20 12:33:26 Ubuntu kernel: [1.063028] usb 1-1: New USB device strings: 
Mfr=2, Product=3, SerialNumber=0
Feb 20 12:33:26 Ubuntu kernel: [1.063029] usb 1-1: Product: ASM107x
Feb 20 12:33:26 Ubuntu kernel: [1.063030] usb 1-1: Manufacturer: ASUS Tek.
Feb 20 12:33:26 Ubuntu kernel: [1.063352] hub 1-1:1.0: USB hub found
Feb 20 12:33:26 Ubuntu kernel: [1.063492] hub 1-1:1.0: 4 ports detected

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1348007

Title:
  xhci_hcd: Setup ERROR: setup context command for slot n.

Status in The Linux Kernel:
  Unknown
Status in linux package in Ubuntu:
  Triaged

Bug description:
  [24754.899114] usb 3-1: reset high-speed USB device number 4 using xhci_hcd
  [24754.899167] xhci_hcd :00:14.0: Setup ERROR: setup context command for 
slot 3.
  [24754.899174] usb 3-1: hub failed to enable device, error -22
  [24755.010826] usb 3-1: reset high-speed USB device number 4 using xhci_hcd
  [24755.010845] xhci_hcd :00:14.0: Setup ERROR: setup context command for 
slot 3.
  [24755.010850] usb 3-1: hub failed to enable device, error -22
  [24755.122775] usb 3-1: reset high-speed USB device number 4 using xhci_hcd
  [24755.139442] xhci_hcd :00:14.0: xHCI xhci_drop_endpoint called with 
disabled ep 88004394fac8
  [24755.139451] xhci_hcd :00:14.0: xHCI xhci_drop_endpoint called with 
disabled ep 88004394fa80
  [24755.139632] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc 
says 10 microframes
  [24755.139686] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc 
says 10 microframes
  [24755.139929] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc 
says 10 microframes
  [24755.140016] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc 
says 10 microframes
  [24755.140636] usblp 3-1:1.0: usblp0: USB Bidirectional printer dev 4 if 0 
alt 0 proto 2 vid 0x04E8 pid 0x330F
  [26859.666205] usb 3-1: USB disconnect, device number 4
  [26859.666475] usblp0: removed

[Kernel-packages] [Bug 1352821] Re: 0489:e078 - Qualcom Atheros - Ubuntu 14.04 bluetooth not working