[Kernel-packages] [Bug 1450497] Re: Enable CONFIG_VIRT_CPU_ACCOUNTING_NATIVE for ppc64el
$ grep CONFIG_VIRT_CPU /boot/config-3.16.0-39-generic CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set I created two VMs and watched top in each VM and observed a steal%. Verified for Utopic. ** Tags removed: verification-needed-utopic ** Tags added: verification-done-utopic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1450497 Title: Enable CONFIG_VIRT_CPU_ACCOUNTING_NATIVE for ppc64el Status in linux package in Ubuntu: Fix Released Status in linux source package in Utopic: Fix Committed Bug description: [Impact] I would like to ask to set CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y on ppc64el kernel config in 3.16 kernel (14.10 and/or 14.04.2) to provide %steal number properly reported. Historically, it was enabled, became disabled and later enabled again: Ubuntu 14.04: # cat /boot/config-3.13.0-24-generic | grep VIRT_CPU CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y Ubuntu 14.10: # cat /boot/config-3.16.0-23-generic | grep VIRT_CPU # CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set Ubuntu 15.04: # cat /boot/config-3.19.0-12-generic | grep VIRT_CPU CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y [Test Case] Run VM and ensure %steal is reported properly. [Fix] CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y in config. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1450497/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid and wily kernel?
From the data I can see all 6 multipath disks are set to failover mode. Which in this special case is done because some implicit logic in the multipath-tools detected that the scsi controller supports ALUA queries and those returned that host0 has all disks in active state. So all IO is going through that controller. The scsi disk devices seen through the other controller (host1) are only in standby. The boot dmesg reports inconsistencies in the ext4 filesystem on dm-6 which due to a (normally harmless) error message before can be translated into mpath1-part2. Not sure, but on the system you gave me access to the only alias with data was mpath0. So that may be a potential problem or just a different config. And what cannot be seen is whether maybe the installation+reboot had maybe left the filesystem in a bad state. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458977] Re: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker
** Description changed: This bug is for tracking the 3.16.0-39.53~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 19:00 UTC kernel-stable-master-bug:1458778 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:01 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC + kernel-stable-Regression-testing-end:Monday, 08. June 2015 20:00 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1458977 Title: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-utopic package in Ubuntu: Invalid Status in linux-lts-utopic source package in Trusty: New Bug description: This bug is for tracking the 3.16.0-39.53~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 19:00 UTC kernel-stable-master-bug:1458778 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:01 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC kernel-stable-Regression-testing-end:Monday, 08. June 2015 20:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458977/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1448269] Re: qemu guest hangs on nested kvm startup with host kernel oops
** Changed in: linux (Ubuntu) Status: Triaged = In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1448269 Title: qemu guest hangs on nested kvm startup with host kernel oops Status in linux package in Ubuntu: In Progress Bug description: I'm creating a vivid qemu guest on a trusty host with 3.13.0-48-generic kernel. When I start a guest inside that guest, I get the oops below on the host while the first guest hangs and must be (virsh) destroyed. Apr 24 20:40:08 sergeh2 kernel: [1575627.844208] [ cut here ] Apr 24 20:40:08 sergeh2 kernel: [1575627.844227] WARNING: CPU: 2 PID: 17176 at /build/buildd/linux-3.13.0/arch/x86/kvm/vmx.c:8414 nested_vmx_vmexit+0x11c/0x150 [kvm_intel]() Apr 24 20:40:08 sergeh2 kernel: [1575627.844229] Modules linked in: vhost_net vhost macvtap macvlan xts gf128mul xt_conntrack ipt_REJECT ip6table_filter ip6_tables ebtable_nat ebtables veth xt_nat xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack xt_tcpudp bridge stp llc iptable_filter ip_tables x_tables dm_crypt gpio_ich coretemp kvm_intel kvm i7core_edac edac_core lpc_ich shpchp mac_hid serio_raw lp parp ort btrfs libcrc32c raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq raid0 multipath linear dm_snapshot raid1 nouveau mxm_wmi video i2c_algo_bit ttm drm_kms_helper drm ahci r8169 libahci mii wmi Apr 24 20:40:08 sergeh2 kernel: [1575627.844281] CPU: 2 PID: 17176 Comm: qemu-system-x86 Not tainted 3.13.0-48-generic #80-Ubuntu Apr 24 20:40:08 sergeh2 kernel: [1575627.844283] Hardware name: MSI MS-7522/MSI X58 Pro (MS-7522) , BIOS V8.14B8 11/09/2012 Apr 24 20:40:08 sergeh2 kernel: [1575627.844286] 0009 880907561c98 81721506 Apr 24 20:40:08 sergeh2 kernel: [1575627.844290] 880907561cd0 810677dd 880bfa808000 0014 Apr 24 20:40:08 sergeh2 kernel: [1575627.844293] 8806da7a7000 880bfca9c800 880907561ce0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844297] Call Trace: Apr 24 20:40:08 sergeh2 kernel: [1575627.844305] [81721506] dump_stack+0x45/0x56 Apr 24 20:40:08 sergeh2 kernel: [1575627.844310] [810677dd] warn_slowpath_common+0x7d/0xa0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844314] [810678ba] warn_slowpath_null+0x1a/0x20 Apr 24 20:40:08 sergeh2 kernel: [1575627.844321] [a081f8ec] nested_vmx_vmexit+0x11c/0x150 [kvm_intel] Apr 24 20:40:08 sergeh2 kernel: [1575627.844327] [a081fafd] vmx_queue_exception+0xfd/0x140 [kvm_intel] Apr 24 20:40:08 sergeh2 kernel: [1575627.844347] [a03b7020] vcpu_enter_guest+0x9f0/0xce0 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844364] [a03bb2d8] kvm_arch_vcpu_ioctl_run+0x1e8/0x460 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844376] [a03a5042] kvm_vcpu_ioctl+0x2a2/0x5e0 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844381] [810aaa38] ? __wake_up_common+0x58/0x90 Apr 24 20:40:08 sergeh2 kernel: [1575627.844387] [811ffc91] ? fsnotify+0x241/0x320 Apr 24 20:40:08 sergeh2 kernel: [1575627.844391] [811d11c0] do_vfs_ioctl+0x2e0/0x4c0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844406] [a03b0504] ? kvm_on_user_return+0x74/0x80 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844409] [811d1421] SyS_ioctl+0x81/0xa0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844414] [81731fbd] system_call_fastpath+0x1a/0x1f Apr 24 20:40:08 sergeh2 kernel: [1575627.844416] ---[ end trace 351396e62b6ef224 ]--- Apr 24 20:48:29 sergeh2 dnsmasq-dhcp[1409]: DHCPREQUEST(lxcbr0) 10.0.3.104 00:16:3e:72:73:32 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-48-generic 3.13.0-48.80 ProcVersionSignature: Ubuntu 3.13.0-48.80-generic 3.13.11-ckt16 Uname: Linux 3.13.0-48-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Apr 10 14:22 seq crw-rw 1 root audio 116, 33 Apr 10 14:22 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Fri Apr 24 20:59:31 2015 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' MachineType: MSI MS-7522 PciMultimedia: ProcFB: ProcKernelCmdLine:
[Kernel-packages] [Bug 1381005] Re: Long stdin from terminal can result in code execution
** Tags removed: verification-needed-trusty ** Tags added: verification-done-trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1381005 Title: Long stdin from terminal can result in code execution Status in linux package in Ubuntu: In Progress Status in linux source package in Trusty: Fix Committed Status in linux source package in Utopic: In Progress Status in linux source package in Vivid: In Progress Bug description: Under certain conditions, the input entered from a terminal with a foreground process waiting for stdin, can be interpreted and executed by the shell. Steps to reproduce: 1) Open a terminal 2) Run a simple program that waits for stdin (like cat, tee, head, tail, ...) or even the bash-builtin command read. No need to specify arguments 3) Type or paste exactly 4096 ASCII characters into the terminal (see sample attachment) 4) Press Enter What should happen: The program in foreground reads 4097 characters (the last one is new line). What actually happens: Instead of reading the input, the current program exits (read() only reads one character before EOF) and the shell executes the same input starting from the second character. I believe that the issue can be reproduced with: - any terminal (tested on xterm, gnome-terminal, tty) - any shell (tested on bash, zsh) - any program that reads stdin from terminal (not attached to a pipe) Debugging the shell with gdb suggests that the bug is in the implementation of read(), hence libc6 or under (kernel). Specifically, the bug is caused by read() reading only one character (new line) when entering a text of 4096 characters in stdin on the terminal. It looks like read() is then closing the stdin descriptor. If the input is 4097 characters long, read() will read two characters and the shell will interpret from the 3rd character, and so on. Verified on: Ubuntu 14.04.1 LTS Kernel: 3.13.0-24-generic x86_64 3.13.0-32-generic x86_64 3.13.0-36-generic x86_64 libc6: 2.19-0ubuntu6 2.19-0ubuntu6.1 2.19-0ubuntu6.3 I'm happy to provide more information if it helps. Angelo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1381005/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1448269] Re: qemu guest hangs on nested kvm startup with host kernel oops
With 3.16.0-37-generic on the host, i no longer get an oops on the host, and the guest instantly reboots rather than hanging. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1448269 Title: qemu guest hangs on nested kvm startup with host kernel oops Status in linux package in Ubuntu: Triaged Bug description: I'm creating a vivid qemu guest on a trusty host with 3.13.0-48-generic kernel. When I start a guest inside that guest, I get the oops below on the host while the first guest hangs and must be (virsh) destroyed. Apr 24 20:40:08 sergeh2 kernel: [1575627.844208] [ cut here ] Apr 24 20:40:08 sergeh2 kernel: [1575627.844227] WARNING: CPU: 2 PID: 17176 at /build/buildd/linux-3.13.0/arch/x86/kvm/vmx.c:8414 nested_vmx_vmexit+0x11c/0x150 [kvm_intel]() Apr 24 20:40:08 sergeh2 kernel: [1575627.844229] Modules linked in: vhost_net vhost macvtap macvlan xts gf128mul xt_conntrack ipt_REJECT ip6table_filter ip6_tables ebtable_nat ebtables veth xt_nat xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack xt_tcpudp bridge stp llc iptable_filter ip_tables x_tables dm_crypt gpio_ich coretemp kvm_intel kvm i7core_edac edac_core lpc_ich shpchp mac_hid serio_raw lp parp ort btrfs libcrc32c raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq raid0 multipath linear dm_snapshot raid1 nouveau mxm_wmi video i2c_algo_bit ttm drm_kms_helper drm ahci r8169 libahci mii wmi Apr 24 20:40:08 sergeh2 kernel: [1575627.844281] CPU: 2 PID: 17176 Comm: qemu-system-x86 Not tainted 3.13.0-48-generic #80-Ubuntu Apr 24 20:40:08 sergeh2 kernel: [1575627.844283] Hardware name: MSI MS-7522/MSI X58 Pro (MS-7522) , BIOS V8.14B8 11/09/2012 Apr 24 20:40:08 sergeh2 kernel: [1575627.844286] 0009 880907561c98 81721506 Apr 24 20:40:08 sergeh2 kernel: [1575627.844290] 880907561cd0 810677dd 880bfa808000 0014 Apr 24 20:40:08 sergeh2 kernel: [1575627.844293] 8806da7a7000 880bfca9c800 880907561ce0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844297] Call Trace: Apr 24 20:40:08 sergeh2 kernel: [1575627.844305] [81721506] dump_stack+0x45/0x56 Apr 24 20:40:08 sergeh2 kernel: [1575627.844310] [810677dd] warn_slowpath_common+0x7d/0xa0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844314] [810678ba] warn_slowpath_null+0x1a/0x20 Apr 24 20:40:08 sergeh2 kernel: [1575627.844321] [a081f8ec] nested_vmx_vmexit+0x11c/0x150 [kvm_intel] Apr 24 20:40:08 sergeh2 kernel: [1575627.844327] [a081fafd] vmx_queue_exception+0xfd/0x140 [kvm_intel] Apr 24 20:40:08 sergeh2 kernel: [1575627.844347] [a03b7020] vcpu_enter_guest+0x9f0/0xce0 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844364] [a03bb2d8] kvm_arch_vcpu_ioctl_run+0x1e8/0x460 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844376] [a03a5042] kvm_vcpu_ioctl+0x2a2/0x5e0 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844381] [810aaa38] ? __wake_up_common+0x58/0x90 Apr 24 20:40:08 sergeh2 kernel: [1575627.844387] [811ffc91] ? fsnotify+0x241/0x320 Apr 24 20:40:08 sergeh2 kernel: [1575627.844391] [811d11c0] do_vfs_ioctl+0x2e0/0x4c0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844406] [a03b0504] ? kvm_on_user_return+0x74/0x80 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844409] [811d1421] SyS_ioctl+0x81/0xa0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844414] [81731fbd] system_call_fastpath+0x1a/0x1f Apr 24 20:40:08 sergeh2 kernel: [1575627.844416] ---[ end trace 351396e62b6ef224 ]--- Apr 24 20:48:29 sergeh2 dnsmasq-dhcp[1409]: DHCPREQUEST(lxcbr0) 10.0.3.104 00:16:3e:72:73:32 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-48-generic 3.13.0-48.80 ProcVersionSignature: Ubuntu 3.13.0-48.80-generic 3.13.11-ckt16 Uname: Linux 3.13.0-48-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Apr 10 14:22 seq crw-rw 1 root audio 116, 33 Apr 10 14:22 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Fri Apr 24 20:59:31 2015 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' MachineType: MSI MS-7522 PciMultimedia: ProcFB:
[Kernel-packages] [Bug 1448269] Re: qemu guest hangs on nested kvm startup with host kernel oops
This happens with both (first-level) guest kernels 3.19.0-20-generic and 3.19.0-18-generic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1448269 Title: qemu guest hangs on nested kvm startup with host kernel oops Status in linux package in Ubuntu: Triaged Bug description: I'm creating a vivid qemu guest on a trusty host with 3.13.0-48-generic kernel. When I start a guest inside that guest, I get the oops below on the host while the first guest hangs and must be (virsh) destroyed. Apr 24 20:40:08 sergeh2 kernel: [1575627.844208] [ cut here ] Apr 24 20:40:08 sergeh2 kernel: [1575627.844227] WARNING: CPU: 2 PID: 17176 at /build/buildd/linux-3.13.0/arch/x86/kvm/vmx.c:8414 nested_vmx_vmexit+0x11c/0x150 [kvm_intel]() Apr 24 20:40:08 sergeh2 kernel: [1575627.844229] Modules linked in: vhost_net vhost macvtap macvlan xts gf128mul xt_conntrack ipt_REJECT ip6table_filter ip6_tables ebtable_nat ebtables veth xt_nat xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack xt_tcpudp bridge stp llc iptable_filter ip_tables x_tables dm_crypt gpio_ich coretemp kvm_intel kvm i7core_edac edac_core lpc_ich shpchp mac_hid serio_raw lp parp ort btrfs libcrc32c raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq raid0 multipath linear dm_snapshot raid1 nouveau mxm_wmi video i2c_algo_bit ttm drm_kms_helper drm ahci r8169 libahci mii wmi Apr 24 20:40:08 sergeh2 kernel: [1575627.844281] CPU: 2 PID: 17176 Comm: qemu-system-x86 Not tainted 3.13.0-48-generic #80-Ubuntu Apr 24 20:40:08 sergeh2 kernel: [1575627.844283] Hardware name: MSI MS-7522/MSI X58 Pro (MS-7522) , BIOS V8.14B8 11/09/2012 Apr 24 20:40:08 sergeh2 kernel: [1575627.844286] 0009 880907561c98 81721506 Apr 24 20:40:08 sergeh2 kernel: [1575627.844290] 880907561cd0 810677dd 880bfa808000 0014 Apr 24 20:40:08 sergeh2 kernel: [1575627.844293] 8806da7a7000 880bfca9c800 880907561ce0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844297] Call Trace: Apr 24 20:40:08 sergeh2 kernel: [1575627.844305] [81721506] dump_stack+0x45/0x56 Apr 24 20:40:08 sergeh2 kernel: [1575627.844310] [810677dd] warn_slowpath_common+0x7d/0xa0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844314] [810678ba] warn_slowpath_null+0x1a/0x20 Apr 24 20:40:08 sergeh2 kernel: [1575627.844321] [a081f8ec] nested_vmx_vmexit+0x11c/0x150 [kvm_intel] Apr 24 20:40:08 sergeh2 kernel: [1575627.844327] [a081fafd] vmx_queue_exception+0xfd/0x140 [kvm_intel] Apr 24 20:40:08 sergeh2 kernel: [1575627.844347] [a03b7020] vcpu_enter_guest+0x9f0/0xce0 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844364] [a03bb2d8] kvm_arch_vcpu_ioctl_run+0x1e8/0x460 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844376] [a03a5042] kvm_vcpu_ioctl+0x2a2/0x5e0 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844381] [810aaa38] ? __wake_up_common+0x58/0x90 Apr 24 20:40:08 sergeh2 kernel: [1575627.844387] [811ffc91] ? fsnotify+0x241/0x320 Apr 24 20:40:08 sergeh2 kernel: [1575627.844391] [811d11c0] do_vfs_ioctl+0x2e0/0x4c0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844406] [a03b0504] ? kvm_on_user_return+0x74/0x80 [kvm] Apr 24 20:40:08 sergeh2 kernel: [1575627.844409] [811d1421] SyS_ioctl+0x81/0xa0 Apr 24 20:40:08 sergeh2 kernel: [1575627.844414] [81731fbd] system_call_fastpath+0x1a/0x1f Apr 24 20:40:08 sergeh2 kernel: [1575627.844416] ---[ end trace 351396e62b6ef224 ]--- Apr 24 20:48:29 sergeh2 dnsmasq-dhcp[1409]: DHCPREQUEST(lxcbr0) 10.0.3.104 00:16:3e:72:73:32 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-48-generic 3.13.0-48.80 ProcVersionSignature: Ubuntu 3.13.0-48.80-generic 3.13.11-ckt16 Uname: Linux 3.13.0-48-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Apr 10 14:22 seq crw-rw 1 root audio 116, 33 Apr 10 14:22 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied Date: Fri Apr 24 20:59:31 2015 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' MachineType: MSI MS-7522 PciMultimedia: ProcFB: ProcKernelCmdLine:
[Kernel-packages] [Bug 1463153] [NEW] freeze when restart or shutdown
Public bug reported: When I try to restart or shutdown system freeze. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.11.0-15-generic 3.11.0-15.25~precise1 ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 Uname: Linux 3.11.0-15-generic i686 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.9 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: biuro 2679 F pulseaudio CRDA: Error: [Errno 2] Nie ma takiego pliku ani katalogu Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfe9fc000 irq 46' Mixer name : 'SigmaTel STAC9228' Components : 'HDA:14f12c06,14f1000f,0010 HDA:10951392,1028022f,0010 HDA:83847616,1028022f,00100402' Controls : 45 Simple ctrls : 18 Date: Mon Jun 8 21:33:11 2015 HibernationDevice: RESUME=UUID=4a472eea-de46-4870-b62c-e8a45b750172 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140204) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Dell Inc. Inspiron 1525 MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=pl_PL.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=3068bc27-9464-4fbb-a181-712e96ebba9e ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory /home/biuro not ours. No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.18 RfKill: SourcePackage: linux-lts-saucy UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/27/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd10/27/2009:svnDellInc.:pnInspiron1525:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Inspiron 1525 dmi.sys.vendor: Dell Inc. ** Affects: linux-lts-saucy (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 precise qa-kernel-lts-testing -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-saucy in Ubuntu. https://bugs.launchpad.net/bugs/1463153 Title: freeze when restart or shutdown Status in linux-lts-saucy package in Ubuntu: New Bug description: When I try to restart or shutdown system freeze. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.11.0-15-generic 3.11.0-15.25~precise1 ProcVersionSignature: Ubuntu 3.11.0-15.25~precise1-generic 3.11.10 Uname: Linux 3.11.0-15-generic i686 NonfreeKernelModules: wl AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic. ApportVersion: 2.0.1-0ubuntu17.9 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: biuro 2679 F pulseaudio CRDA: Error: [Errno 2] Nie ma takiego pliku ani katalogu Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfe9fc000 irq 46' Mixer name : 'SigmaTel STAC9228' Components : 'HDA:14f12c06,14f1000f,0010 HDA:10951392,1028022f,0010 HDA:83847616,1028022f,00100402' Controls : 45 Simple ctrls : 18 Date: Mon Jun 8 21:33:11 2015 HibernationDevice: RESUME=UUID=4a472eea-de46-4870-b62c-e8a45b750172 InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release i386 (20140204) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Dell Inc. Inspiron 1525 MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=pl_PL.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=3068bc27-9464-4fbb-a181-712e96ebba9e ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory /home/biuro not ours. No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-15-generic N/A linux-backports-modules-3.11.0-15-generic N/A linux-firmware 1.79.18 RfKill: SourcePackage: linux-lts-saucy UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/27/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: A17 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA17:bd10/27/2009:svnDellInc.:pnInspiron1525:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Inspiron 1525 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to:
[Kernel-packages] [Bug 1459957] Re: linux: 3.19.0-20.20 -proposed tracker
** Tags added: qa-testing-passed ** Changed in: kernel-sru-workflow/regression-testing Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1459957 Title: linux: 3.19.0-20.20 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: In Progress Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Vivid: Confirmed Bug description: This bug is for tracking the 3.19.0-20.20 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Friday, 29. May 2015 08:47 UTC kernel-stable-Prepare-package-end:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-start:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:02 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-end:Tuesday, 02. June 2015 08:01 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 05. June 2015 16:01 UTC kernel-stable-Verification-testing-end:Friday, 05. June 2015 16:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459957/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462919] Re: kswapd pulls server down every 2 weeks.
Did this issue start happening after an update/upgrade? Was there a kernel version where you were not having this particular problem? This will help determine if the problem you are seeing is the result of a regression, and when this regression was introduced. If this is a regression, we can perform a kernel bisect to identify the commit that introduced the problem. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462919 Title: kswapd pulls server down every 2 weeks. Status in linux package in Ubuntu: Incomplete Bug description: in 15.04 even when having plenty of RAM and swap kswpd uses lots of CPU and might bring the machine down to a crawl making is unable to access it over the network. I say might, because it's only a very clear feeling that I have. I do not know it for sure. Anyway the fact is that I have two server that once every 2 week ends up totally unaccessible from the network. They can be pinged though. Logging in locally takes a long time. Rebooting them locally takes a long time. They have absolutely no noticeable disk IO when in this stalled state. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 jun 8 09:57 seq crw-rw 1 root audio 116, 33 jun 8 09:57 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Mon Jun 8 10:02:44 2015 HibernationDevice: RESUME=UUID=17183f57-6587-47f2-84dc-553f7e5cf3a8 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Intel Corporation S5520UR PciMultimedia: ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=/dev/mapper/vg0-root ro nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-05-16 (22 days ago) dmi.bios.date: 12/17/2009 dmi.bios.vendor: Intel Corp. dmi.bios.version: S5500.86B.01.00.0046.121720091524 dmi.board.asset.tag: dmi.board.name: S5520UR dmi.board.vendor: Intel Corporation dmi.board.version: E22554-606 dmi.chassis.asset.tag: dmi.chassis.type: 23 dmi.chassis.vendor: ... dmi.chassis.version: .. dmi.modalias: dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0046.121720091524:bd12/17/2009:svnIntelCorporation:pnS5520UR:pvr:rvnIntelCorporation:rnS5520UR:rvrE22554-606:cvn...:ct23:cvr..: dmi.product.name: S5520UR dmi.product.version: dmi.sys.vendor: Intel Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1395243] Re: Please add min/max quirk for pnp-id LEN2006 (Lenovo Thinkpad Edge E440)
** Changed in: linux (Ubuntu) Status: Triaged = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1395243 Title: Please add min/max quirk for pnp-id LEN2006 (Lenovo Thinkpad Edge E440) Status in linux package in Ubuntu: Incomplete Bug description: This a request to get a quirk added upstream for the Synaptics ClickPad (buttonless trackpad) of the Lenovo Edge E440 to the synaptics kernel driver so the right coordinates for the surface corners are reported and the pointer functionality is correct. $ lsb_release -rd Description: Ubuntu 14.04.1 LTS Release: 14.04 $ cat /sys/class/dmi/id/product_version ThinkPad Edge E440 $ cat /sys/devices/pnp0/*/id PNP0c01 PNP0c02 PNP0103 PNP0200 PNP0800 PNP0c04 PNP0b00 LEN0071 PNP0303 LEN2006 PNP0f13 SMO1200 PNP0c31 $ dmesg | grep -i synaptics [3.757743] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2691, fw id: 1494646 [3.757746] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [3.804025] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 $ sudo ./touchpad-edge-detector /dev/input/event3 Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event3 Move one finger around the touchpad to detect the actual edges Kernel says: x [1472..5044], y [1408..3398] Touchpad sends: x [1024..5045], y [2457..4832] /^C I will be attaching a patch tomorrow. Similar changes have been requested for other Thinkpad models also shipping these new ClikcPads, via other distributions' bug trackers, forwarded upstream, and successfully incorporated in mainstream kernel code. See e.g. https://bugzilla.redhat.com/show_bug.cgi?id=1114768 and https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/input/mouse/synaptics.c?id=e76aed9da7189eeb41b9856552ce5721181e8e8d https://bugzilla.opensuse.org/show_bug.cgi?id=903748 and https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/input/mouse/synaptics.c?id=e4742b1e786ca386e88e6cfb2801e14e15e365cd https://bugzilla.redhat.com/show_bug.cgi?id=1096436 and https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/input/mouse/synaptics.c?id=0b5fe736fe923f1f5e05413878d5990e92ffbdf5 Thanks. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ramiro 2285 F pulseaudio /dev/snd/controlC0: ramiro 2285 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=e05d02a5-1ae0-4306-a2c1-41785992e9a8 InstallationDate: Installed on 2014-07-05 (140 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: LENOVO 20C5A03CAC Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=2ee8855d-0441-4ebf-9fbc-c2ca1e16fe80 ro quiet splash acpi_backlight=vendor i915.disable_power_well=0 vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 RelatedPackageVersions: linux-restricted-modules-3.13.0-39-generic N/A linux-backports-modules-3.13.0-39-generic N/A linux-firmware 1.127.8 Tags: trusty Uname: Linux 3.13.0-39-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/14/2014 dmi.bios.vendor: LENOVO dmi.bios.version: J9ET96WW (2.16 ) dmi.board.asset.tag: Not Available dmi.board.name: 20C5A03CAC dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrJ9ET96WW(2.16):bd10/14/2014:svnLENOVO:pn20C5A03CAC:pvrThinkPadEdgeE440:rvnLENOVO:rn20C5A03CAC:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 20C5A03CAC dmi.product.version: ThinkPad Edge E440 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1395243/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458977] Re: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker
** Tags added: qa-testing-passed ** Changed in: kernel-sru-workflow/regression-testing Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1458977 Title: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-utopic package in Ubuntu: Invalid Status in linux-lts-utopic source package in Trusty: New Bug description: This bug is for tracking the 3.16.0-39.53~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 19:00 UTC kernel-stable-master-bug:1458778 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:01 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458977/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463198] Re: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl]
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463198 Title: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl] Status in linux package in Ubuntu: New Bug description: Slow start up. Videos freeze. Constant error messages at start up. ProblemType: KernelOops DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-10-generic 3.16.0-10.15 ProcVersionSignature: Ubuntu 3.16.0-10.15-generic 3.16.1 Uname: Linux 3.16.0-10-generic i686 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.6-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hmlpatron 2155 F pulseaudio Date: Fri Jun 5 18:34:35 2015 DuplicateSignature: suspend/resume:Dell Inc. Latitude D630:A13 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=f342e155-de65-4f78-9e89-416d5a7f5e4f InstallationDate: Installed on 2014-07-14 (329 days ago) InstallationMedia: This InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. Latitude D630 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-10-generic root=UUID=761b1e0f-6b98-400b-8102-545317874db4 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-10-generic N/A linux-backports-modules-3.16.0-10-generic N/A linux-firmware 1.132 SourcePackage: linux Title: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/28/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd07/28/2008:svnDellInc.:pnLatitudeD630:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D630 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463198/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463164] [NEW] Broadcom bcm43xx WiFI works with Fedora, why not Ubuntu?
You have been subscribed to a public bug: Hi, I run Ubuntu on an older Dell laptop with Broadcom bcm4312 WiFI. Basically, it doesn't work out of the box with Ubuntu, and it is extremely complicated to configure without access to the Internet (when a LAN connection is not available), which is a frequent problem when the WiFI isn't working. It requires these unfriendly instructions to get it working: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Fedora 22, on the other hand, works out of the box on this same machine. So, if Fedora 22, with its paranoid insistence on only free software, is able to make this work out of the box, why can't Ubuntu? Linux for human beings is looking more like Fedora in this case. ** Affects: b43-fwcutter (Ubuntu) Importance: Undecided Status: New ** Tags: bot-comment -- Broadcom bcm43xx WiFI works with Fedora, why not Ubuntu? https://bugs.launchpad.net/bugs/1463164 You received this bug notification because you are a member of Kernel Packages, which is subscribed to b43-fwcutter in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463198] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463198 Title: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl] Status in linux package in Ubuntu: Confirmed Bug description: Slow start up. Videos freeze. Constant error messages at start up. ProblemType: KernelOops DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-10-generic 3.16.0-10.15 ProcVersionSignature: Ubuntu 3.16.0-10.15-generic 3.16.1 Uname: Linux 3.16.0-10-generic i686 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.6-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hmlpatron 2155 F pulseaudio Date: Fri Jun 5 18:34:35 2015 DuplicateSignature: suspend/resume:Dell Inc. Latitude D630:A13 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=f342e155-de65-4f78-9e89-416d5a7f5e4f InstallationDate: Installed on 2014-07-14 (329 days ago) InstallationMedia: This InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. Latitude D630 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-10-generic root=UUID=761b1e0f-6b98-400b-8102-545317874db4 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-10-generic N/A linux-backports-modules-3.16.0-10-generic N/A linux-firmware 1.132 SourcePackage: linux Title: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/28/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd07/28/2008:svnDellInc.:pnLatitudeD630:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D630 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463198/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1459957] Re: linux: 3.19.0-20.20 -proposed tracker
** Description changed: This bug is for tracking the 3.19.0-20.20 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Friday, 29. May 2015 08:47 UTC kernel-stable-Prepare-package-end:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-start:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:02 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-end:Tuesday, 02. June 2015 08:01 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 05. June 2015 16:01 UTC kernel-stable-Verification-testing-end:Friday, 05. June 2015 16:01 UTC + kernel-stable-Regression-testing-end:Monday, 08. June 2015 20:01 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1459957 Title: linux: 3.19.0-20.20 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: In Progress Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Vivid: Confirmed Bug description: This bug is for tracking the 3.19.0-20.20 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Friday, 29. May 2015 08:47 UTC kernel-stable-Prepare-package-end:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-start:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:02 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-end:Tuesday, 02. June 2015 08:01 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 05. June 2015 16:01 UTC kernel-stable-Verification-testing-end:Friday, 05. June 2015 16:01 UTC kernel-stable-Regression-testing-end:Monday, 08. June 2015 20:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459957/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1459068] Re: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker
** Tags added: qa-testing-passed ** Changed in: kernel-sru-workflow/regression-testing Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1459068 Title: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-54.91~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:01 UTC kernel-stable-master-bug:1458618 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:30 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:30 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:01 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459068/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1459068] Re: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker
** Description changed: This bug is for tracking the 3.13.0-54.91~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:01 UTC kernel-stable-master-bug:1458618 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:30 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:30 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:01 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:01 UTC + kernel-stable-Regression-testing-end:Monday, 08. June 2015 21:01 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1459068 Title: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-54.91~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:01 UTC kernel-stable-master-bug:1458618 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:30 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:30 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:01 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:01 UTC kernel-stable-Regression-testing-end:Monday, 08. June 2015 21:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459068/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463198] [NEW] [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl]
Public bug reported: Slow start up. Videos freeze. Constant error messages at start up. ProblemType: KernelOops DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-10-generic 3.16.0-10.15 ProcVersionSignature: Ubuntu 3.16.0-10.15-generic 3.16.1 Uname: Linux 3.16.0-10-generic i686 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.6-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hmlpatron 2155 F pulseaudio Date: Fri Jun 5 18:34:35 2015 DuplicateSignature: suspend/resume:Dell Inc. Latitude D630:A13 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=f342e155-de65-4f78-9e89-416d5a7f5e4f InstallationDate: Installed on 2014-07-14 (329 days ago) InstallationMedia: This InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. Latitude D630 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-10-generic root=UUID=761b1e0f-6b98-400b-8102-545317874db4 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-10-generic N/A linux-backports-modules-3.16.0-10-generic N/A linux-firmware 1.132 SourcePackage: linux Title: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/28/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd07/28/2008:svnDellInc.:pnLatitudeD630:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D630 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-kerneloops i386 resume suspend utopic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463198 Title: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl] Status in linux package in Ubuntu: New Bug description: Slow start up. Videos freeze. Constant error messages at start up. ProblemType: KernelOops DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-10-generic 3.16.0-10.15 ProcVersionSignature: Ubuntu 3.16.0-10.15-generic 3.16.1 Uname: Linux 3.16.0-10-generic i686 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.14.6-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hmlpatron 2155 F pulseaudio Date: Fri Jun 5 18:34:35 2015 DuplicateSignature: suspend/resume:Dell Inc. Latitude D630:A13 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=f342e155-de65-4f78-9e89-416d5a7f5e4f InstallationDate: Installed on 2014-07-14 (329 days ago) InstallationMedia: This InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. Latitude D630 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-10-generic root=UUID=761b1e0f-6b98-400b-8102-545317874db4 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.16.0-10-generic N/A linux-backports-modules-3.16.0-10-generic N/A linux-firmware 1.132 SourcePackage: linux Title: [Dell Inc. Latitude D630] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/28/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA13:bd07/28/2008:svnDellInc.:pnLatitudeD630:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Latitude D630 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463198/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to :
[Kernel-packages] [Bug 1461986] Re: can't change usb_charge attribute in /sys/devices/platform/sony-laptop
Yes, I am able to change it, and reactivate it by booting into Windows. Here is a detailed summary of what I did: I shut down my Ubuntu, inserted the HDD containing Windows 8 to my optical bay, and booted into Windows. I found that USB charging was already on in the VAIO program. I shut down windows and checked if it was actuallly on, but the USB was not powered. I booted again into Windows and switched it off. I could successfully switched it off and shut down my PC. When I checked if USB is powered, it obviously was not powered. I booted into windows yet again and switched it on. Now when I shut it down, I found that I could charge my mobile successfully. In short, with windows I was able to successfully reactivate USB Charging. Now I switched the feature off from Windows and booted into Ubuntu, and found it exactly as before, ie Even-though the feature was off, usb_charging had a value of 1, and I could not change it to 0. To test further, I booted into Windows, switched the feature back on, tested it, and booted into linux. I got the same response. usb_charging had a value of 1, and I could not change it to 0. I should add that windows boots with UEFI from the HDD in the optical bay, while Ubuntu boots in Lagacy mode from the internal SSD. To see if changing from UEFI to Lagacy had any effect, I booted into Windows, switched it on and shut down. Now I confirmed that my phone is being charged. I switched to Legacy, and yet again, I can charge my phone when the PC is shut down. If you want, I can test from UEFI booted Ubuntu. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1461986 Title: can't change usb_charge attribute in /sys/devices/platform/sony-laptop Status in linux package in Ubuntu: Incomplete Bug description: I am on a Sony VAIO svf43142sn. My laptop has the ability to leave a USB port powered on even after shutdown to charge other devices. The value of /sys/devices/platform/sony-laptop/usb_charge is 1, but the USB port is not powered on. Also when I tried toggling it to 0 it resets back to 1 when I check again using cat. So I restarted the module sony-laptop with debug flags on. When I try: echo -n 0 | sudo tee -a /sys/devices/platform/sony-laptop/usb_charge these are the curresponding kernel logs, implying that it was a success: [ 9121.879908] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9121.881386] sony_laptop: __call_snc_method: [SN07:0x0107] [ 9121.881394] sony_laptop: called SN07 with 0x0107 (result: 0x) But if I cat the value of usb charge, the change is not reflected, and I see this when I dmesg: [ 9346.202318] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9346.202489] sony_laptop: __call_snc_method: [SN07:0x0007] [ 9346.202494] sony_laptop: called SN07 with 0x0007 (result: 0x0001) If it matters, when i simply echo 1, I will get this: [ 9879.675844] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9879.676878] sony_laptop: __call_snc_method: [SN07:0x00010107] [ 9879.676885] sony_laptop: called SN07 with 0x10107 (result: 0x) The entire debug message when I restart the module(sony-laptop) is given here: http://paste.ubuntu.com/11551226/ . I have asked the same as a question on askubuntu.com. It has got a other information if you need it: http://askubuntu.com/questions/628542/how-to-leave-a-usb-port-powered-during-shutdown-for-charging-mobile --- ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dalton 1816 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=babf655a-816a-4c8a-ad03-6fe550cc1d60 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Sony Corporation SVF14212SNW NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=d52d966a-2fa0-4050-821e-99176a8fc013 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 RelatedPackageVersions: linux-restricted-modules-3.16.0-38-generic N/A linux-backports-modules-3.16.0-38-generic N/A linux-firmware 1.127.12 Tags: trusty Uname: Linux 3.16.0-38-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/18/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0220DA dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony
[Kernel-packages] [Bug 1461738] Re: iwl3945 on X61T crashes with Error sending C_POWER_TBL: time out after 500ms
Tested on upstream kernel, bug exists, marking confirmed as per instructions. ** Tags added: kernel-bug-exists-upstream kernel-bug-exists- upstream-4.1rc6 ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1461738 Title: iwl3945 on X61T crashes with Error sending C_POWER_TBL: time out after 500ms Status in linux package in Ubuntu: Confirmed Bug description: After using wireless for some period of time, it stops working. dmesg report is attached. Rebooting the machine makes the wireless driver work again (for a little bit anyway). I haven't checked if it's related to suspend/resume, but I use this a lot. I can try bisecting for a kernel which doesn't have this problem, although between when I started having problems, I upgraded to Vivid (which didn't fix the problem.) ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-18-generic 3.19.0-18.18 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 NonfreeKernelModules: openafs ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/pcmC0D0p: ezyang 3167 F...m pulseaudio /dev/snd/controlC0: ezyang 3167 F pulseaudio Date: Wed Jun 3 20:09:04 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=/dev/mapper/sabre-swap InstallationDate: Installed on 2013-11-21 (560 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: LENOVO 7762K3U PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-18-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-05-29 (6 days ago) dmi.bios.date: 02/21/2008 dmi.bios.vendor: LENOVO dmi.bios.version: 7SET25WW (1.11 ) dmi.board.name: 7762K3U dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr7SET25WW(1.11):bd02/21/2008:svnLENOVO:pn7762K3U:pvrThinkPadX61Tablet:rvnLENOVO:rn7762K3U:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 7762K3U dmi.product.version: ThinkPad X61 Tablet dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461738/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid and wily kernel?
** Tags added: kernel-da-key ** Changed in: linux (Ubuntu) Importance: Undecided = High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 557829] Re: 1002:9613 [Toshiba Satellite L305D-S5959] overheats computer
Ubuntu 15.04 is overheating laptops. Both laptops at home powers off, and both have different graphic adapters. One of them was working fine under Ubuntu 14.10, is mostly new from Toshiba, and uses Intel integrated graphics which presumably doesn't overheat too much compared with AMD and NVIDIA ones. Even when the CPU is set to a lower energy state and thermald is installed, the problem still persist. After reading various questions about this issue in AskUbuntu.com I greatly suspect this is a major issue with plenty of laptops. ** Tags added: trusty vivid ** Changed in: linux (Ubuntu) Status: Incomplete = Triaged ** Changed in: linux (Ubuntu) Importance: Medium = Critical -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/557829 Title: 1002:9613 [Toshiba Satellite L305D-S5959] overheats computer Status in X.org XServer - ATI gfx chipset driver: Confirmed Status in linux package in Ubuntu: Triaged Bug description: Binary package hint: xserver-xorg-video-ati Lucid Lynx 10.04 AMD64 Beta 1 xserver-xorg-video-radeon 1:6.12.192-2ubuntu2 xserver-xorg-video-ati 1:6.12.192-2ubuntu2 AMD AthlonTM X2 Dual-Core QL-65 @ 2.1GHz (running stock speed, Cool 'n' Quiet working, cpu frequency regulation in kerenel is working, idles @ 1.05GHz but temperature still goes up) AMD M780V Chipset ATI Radeon 3100 IGP (RV610) 720P video native support (I suppose that means hardware implemented) Laptop (Toshiba L305D-S5959) overheats when running open source driver. Idles at around 70°C at room temperature of ~22°C, have BIOS set to shutdown at 95°C to avoid hardware damage. Computer will shut itself off due to temperature under moderate load such as viewing flash video in Firefox on hulu.com. This has been repeated at least 3 times. Running the proprietary fglrx driver 2:8.721-0ubuntu7 (with no other software changes), the computer idles @ 45°C (20°C cooler) at room temperature of ~22°C. Watching video on hulu.com does not cause overheating issues. This is something that could damage computers. If it's under warranty but Ubuntu is found on the hard drive the manufacturer will probably void the warranty. I certainly don't want Ubuntu to get that kind of reputation. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xserver-xorg-video-ati 1:6.12.192-2ubuntu2 ProcVersionSignature: Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1 Uname: Linux 2.6.32-19-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Wed Apr 7 23:42:01 2010 DkmsStatus: fglrx, 8.721, 2.6.32-19-generic, x86_64: installed InstallationMedia: Ubuntu 10.04 Lucid Lynx - Beta amd64 (20100318) MachineType: TOSHIBA Satellite L305D ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-19-generic root=UUID=12291b72-5e88-486e-a7e6-60a57bdeefed ro splash quiet vga=786 quiet splash ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: xserver-xorg-video-ati dmi.bios.date: 09/01/2009 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.80 dmi.board.asset.tag: No Asset Tag dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Base Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: AMD dmi.chassis.version: None dmi.modalias: dmi:bvnInsydeCorp.:bvr1.80:bd09/01/2009:svnTOSHIBA:pnSatelliteL305D:pvrPSLC8U-06P01W:rvnTOSHIBA:rnPortablePC:rvrBaseBoardVersion:cvnAMD:ct10:cvrNone: dmi.product.name: Satellite L305D dmi.product.version: PSLC8U-06P01W dmi.sys.vendor: TOSHIBA glxinfo: Error: [Errno 2] No such file or directory system: distro: Ubuntu codename: lucid architecture: x86_64 kernel: 2.6.32-19-generic [lspci] 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Toshiba America Info Systems Device [1179:ff6a] 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780MC [Radeon HD 3100 Graphics] [1002:9613] Subsystem: Toshiba America Info Systems Device [1179:ff6a] To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-driver-ati/+bug/557829/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463222] Re: [System manufacturer System Product Name] hibernate/resume failure
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463222 Title: [System manufacturer System Product Name] hibernate/resume failure Status in linux package in Ubuntu: Confirmed Bug description: Last activity was hibernate. Upon wake-up (touch spacebar), problems. The system did start without me having to cycle power, etc. and I ended up here. I'm a linux user, not a programmer. If you want more info, you will have to ask and work with me. Thanks! ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-53-generic 3.13.0-53.89 ProcVersionSignature: Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19 Uname: Linux 3.13.0-53-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: don1948 F pulseaudio /dev/snd/controlC0: don1948 F pulseaudio CurrentDmesg: [ 31.115976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Mon Jun 8 20:44:19 2015 DuplicateSignature: hibernate/resume:System manufacturer System Product Name:0401 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=ffd2b5a3-0e8e-4f9b-9288-cff133a90145 InstallationDate: Installed on 2011-12-18 (1268 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) InterpreterPath: /usr/bin/python3.4 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic root=UUID=9f13b409-27bd-4e42-99c0-59fccdb87241 ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-53-generic N/A linux-backports-modules-3.13.0-53-generic N/A linux-firmware 1.127.12 RfKill: SourcePackage: linux Title: [System manufacturer System Product Name] hibernate/resume failure UpgradeStatus: Upgraded to trusty on 2014-08-18 (295 days ago) UserGroups: dmi.bios.date: 07/15/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0401 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z68-V LX dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0401:bd07/15/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP8Z68-VLX:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463222/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1460393] Re: Suspend not working on macbook air 6, 2
** Summary changed: - Suspend not working on macbook air 6.2 + Suspend not working on macbook air 6,2 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1460393 Title: Suspend not working on macbook air 6,2 Status in linux package in Ubuntu: Incomplete Bug description: When I close the lid the machine rarely suspends. It only suspends for 2-10 seconds and then it fires up again. When the machine is connected to the power it will never suspend. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-18-generic 3.19.0-18.18 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: peter 1924 F pulseaudio CurrentDesktop: Unity Date: Sun May 31 11:04:31 2015 HibernationDevice: RESUME=UUID=93e51c98-dc33-4e1c-9335-bebcd9424d00 InstallationDate: Installed on 2015-05-30 (0 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 05ac:0291 Apple, Inc. Bus 001 Device 006: ID 05ac:828f Apple, Inc. Bus 001 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Apple Inc. MacBookAir6,2 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic.efi.signed root=UUID=47812b58-937d-4ca1-8dbd-e1214ebfa376 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 SourcePackage: linux UdevLog: Error: [Errno 2] Ingen sådan fil eller filkatalog: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/24/2014 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA61.88Z.0099.B12.1405241030 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-7DF21CB3ED6977E5 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir6,2 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-7DF21CB3ED6977E5 dmi.modalias: dmi:bvnAppleInc.:bvrMBA61.88Z.0099.B12.1405241030:bd05/24/2014:svnAppleInc.:pnMacBookAir6,2:pvr1.0:rvnAppleInc.:rnMac-7DF21CB3ED6977E5:rvrMacBookAir6,2:cvnAppleInc.:ct10:cvrMac-7DF21CB3ED6977E5: dmi.product.name: MacBookAir6,2 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1460393/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458839] Re: Poor Wi-Fi connectivity when connecting USB dock
** Tags removed: kernel-bug-exists-upstream-4.1-rc2 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1458839 Title: Poor Wi-Fi connectivity when connecting USB dock Status in linux package in Ubuntu: Confirmed Bug description: Reproduce: Insert USB dock (Kensington with usb sound card, ethernet card) cable into any USB port What happens: Wi-Fi connectivity worsens and eventually disconnects. Pinging an online target gives me [1432638474.615293] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=11 ttl=54 time=1172 ms [1432638474.636669] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=12 ttl=54 time=185 ms [1432638475.496000] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=13 ttl=54 time=44.3 ms [1432638477.638814] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=14 ttl=54 time=1185 ms [1432638477.644744] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=15 ttl=54 time=192 ms [1432638478.498248] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=16 ttl=54 time=44.4 ms [1432638479.662460] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=17 ttl=54 time=207 ms [1432638480.547434] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=18 ttl=54 time=90.9 ms [1432638482.597835] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=19 ttl=54 time=1140 ms [1432638482.601590] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=20 ttl=54 time=144 ms [1432638484.648946] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=21 ttl=54 time=1191 ms [1432638484.649794] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=22 ttl=54 time=193 ms [1432638485.502967] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=23 ttl=54 time=45.1 ms [1432638487.301295] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=24 ttl=54 time=842 ms [1432638488.649794] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=25 ttl=54 time=1191 ms [1432638488.662959] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=26 ttl=54 time=196 ms [1432638489.514683] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=27 ttl=54 time=46.7 ms [1432638491.653511] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=28 ttl=54 time=1183 ms [1432638491.655011] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=29 ttl=54 time=176 ms [1432638493.659119] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=30 ttl=54 time=1179 ms [1432638493.664250] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=31 ttl=54 time=177 ms [1432638494.534200] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=32 ttl=54 time=45.9 ms … Disconnecting the USB cable restores the connectivity: [1432638514.584374] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=52 ttl=54 time=48.5 ms [1432638515.577822] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=53 ttl=54 time=40.1 ms [1432638516.579000] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=54 ttl=54 time=39.9 ms [1432638517.580760] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=55 ttl=54 time=40.5 ms [1432638518.583465] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=56 ttl=54 time=41.4 ms [1432638519.583923] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=57 ttl=54 time=40.1 ms … What should have happened: Connectivity should not be affected by a connected USB dock Steps taken to debug: * I've told NetworkManager not to manage the USB network card so that it appears unmanaged. This makes no difference. * I've tried older kernels, e.g. 3.14 with no luck * It does not matter what is connected to the dock ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-18-generic 3.19.0-18.18 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: jonas 1514 F pulseaudio CurrentDesktop: Unity Date: Tue May 26 13:08:44 2015 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=7b9cb658-95dd-4e13-a587-d6d0d59ae7e4 InstallationDate: Installed on 2013-08-27 (637 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08
[Kernel-packages] [Bug 1463211] [NEW] mustang board doesn't shutdown/reboot
Public bug reported: [Impact] * The reboot command fails to reboot the system. Instead it hangs here: [ OK ] Stopped Remount Root and Kernel File Systems. Stopping Remount Root and Kernel File Systems... [ OK ] Reached target Shutdown. [ 38.876665] reboot: Restarting system * The poweroff commands doesn't power down the system [Test Case] * sudo reboot (check that the system reboots) * sudo poweroff (check that the system powers down) [Regression Potential] * Low; we've supported this in both trusty and utopic using non- upstream patches - this just achieves parity. [Other Info] These patches are currently non-upstream. They've been submitted multiple times, but don't appear to be getting any responses (negative or otherwise) from upstream. We'd hoped for them to go upstream before backporting, but at this stage we're getting scarily close to 14.04.3, and we don't want to ship an LTS installer that can't reboot after install. ** Affects: linux (Ubuntu) Importance: High Status: Confirmed ** Affects: linux (Ubuntu Vivid) Importance: Undecided Status: Confirmed ** Affects: linux (Ubuntu Wily) Importance: High Status: Confirmed ** Also affects: linux (Ubuntu Wily) Importance: High Status: Confirmed ** Also affects: linux (Ubuntu Vivid) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Vivid) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463211 Title: mustang board doesn't shutdown/reboot Status in linux package in Ubuntu: Confirmed Status in linux source package in Vivid: Confirmed Status in linux source package in Wily: Confirmed Bug description: [Impact] * The reboot command fails to reboot the system. Instead it hangs here: [ OK ] Stopped Remount Root and Kernel File Systems. Stopping Remount Root and Kernel File Systems... [ OK ] Reached target Shutdown. [ 38.876665] reboot: Restarting system * The poweroff commands doesn't power down the system [Test Case] * sudo reboot (check that the system reboots) * sudo poweroff (check that the system powers down) [Regression Potential] * Low; we've supported this in both trusty and utopic using non- upstream patches - this just achieves parity. [Other Info] These patches are currently non-upstream. They've been submitted multiple times, but don't appear to be getting any responses (negative or otherwise) from upstream. We'd hoped for them to go upstream before backporting, but at this stage we're getting scarily close to 14.04.3, and we don't want to ship an LTS installer that can't reboot after install. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463211/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 557829] Re: 1002:9613 [Toshiba Satellite L305D-S5959] overheats computer
Alberto Salvia Novella - As you have different hardware, please run ubuntu-bug to file new bug reports (one for each laptop) so that we can get your system information and a set of log files. ** Changed in: linux (Ubuntu) Status: Triaged = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/557829 Title: 1002:9613 [Toshiba Satellite L305D-S5959] overheats computer Status in X.org XServer - ATI gfx chipset driver: Confirmed Status in linux package in Ubuntu: Incomplete Bug description: Binary package hint: xserver-xorg-video-ati Lucid Lynx 10.04 AMD64 Beta 1 xserver-xorg-video-radeon 1:6.12.192-2ubuntu2 xserver-xorg-video-ati 1:6.12.192-2ubuntu2 AMD AthlonTM X2 Dual-Core QL-65 @ 2.1GHz (running stock speed, Cool 'n' Quiet working, cpu frequency regulation in kerenel is working, idles @ 1.05GHz but temperature still goes up) AMD M780V Chipset ATI Radeon 3100 IGP (RV610) 720P video native support (I suppose that means hardware implemented) Laptop (Toshiba L305D-S5959) overheats when running open source driver. Idles at around 70°C at room temperature of ~22°C, have BIOS set to shutdown at 95°C to avoid hardware damage. Computer will shut itself off due to temperature under moderate load such as viewing flash video in Firefox on hulu.com. This has been repeated at least 3 times. Running the proprietary fglrx driver 2:8.721-0ubuntu7 (with no other software changes), the computer idles @ 45°C (20°C cooler) at room temperature of ~22°C. Watching video on hulu.com does not cause overheating issues. This is something that could damage computers. If it's under warranty but Ubuntu is found on the hard drive the manufacturer will probably void the warranty. I certainly don't want Ubuntu to get that kind of reputation. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: xserver-xorg-video-ati 1:6.12.192-2ubuntu2 ProcVersionSignature: Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1 Uname: Linux 2.6.32-19-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Wed Apr 7 23:42:01 2010 DkmsStatus: fglrx, 8.721, 2.6.32-19-generic, x86_64: installed InstallationMedia: Ubuntu 10.04 Lucid Lynx - Beta amd64 (20100318) MachineType: TOSHIBA Satellite L305D ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-19-generic root=UUID=12291b72-5e88-486e-a7e6-60a57bdeefed ro splash quiet vga=786 quiet splash ProcEnviron: LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: xserver-xorg-video-ati dmi.bios.date: 09/01/2009 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.80 dmi.board.asset.tag: No Asset Tag dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Base Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: AMD dmi.chassis.version: None dmi.modalias: dmi:bvnInsydeCorp.:bvr1.80:bd09/01/2009:svnTOSHIBA:pnSatelliteL305D:pvrPSLC8U-06P01W:rvnTOSHIBA:rnPortablePC:rvrBaseBoardVersion:cvnAMD:ct10:cvrNone: dmi.product.name: Satellite L305D dmi.product.version: PSLC8U-06P01W dmi.sys.vendor: TOSHIBA glxinfo: Error: [Errno 2] No such file or directory system: distro: Ubuntu codename: lucid architecture: x86_64 kernel: 2.6.32-19-generic [lspci] 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Toshiba America Info Systems Device [1179:ff6a] 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780MC [Radeon HD 3100 Graphics] [1002:9613] Subsystem: Toshiba America Info Systems Device [1179:ff6a] To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-driver-ati/+bug/557829/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1449853] Re: Intel 7265 WiFi adapter doesn't work with current firmware version
Confirming this issue on Vivid. Do we have any additional updates? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1449853 Title: Intel 7265 WiFi adapter doesn't work with current firmware version Status in HWE Next Project: In Progress Status in linux-firmware package in Ubuntu: Confirmed Status in linux-firmware source package in Trusty: Fix Committed Status in linux-firmware source package in Utopic: Invalid Bug description: 03:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 59) Current linux-firmware version is 1.127.11 in trusty-updates, which doesn't work, but 1.143 with 3.19kernel in vivid works. Need to upgrade firmware version and firmware API in driver. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1449853/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463222] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463222 Title: [System manufacturer System Product Name] hibernate/resume failure Status in linux package in Ubuntu: Confirmed Bug description: Last activity was hibernate. Upon wake-up (touch spacebar), problems. The system did start without me having to cycle power, etc. and I ended up here. I'm a linux user, not a programmer. If you want more info, you will have to ask and work with me. Thanks! ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-53-generic 3.13.0-53.89 ProcVersionSignature: Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19 Uname: Linux 3.13.0-53-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: don1948 F pulseaudio /dev/snd/controlC0: don1948 F pulseaudio CurrentDmesg: [ 31.115976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Mon Jun 8 20:44:19 2015 DuplicateSignature: hibernate/resume:System manufacturer System Product Name:0401 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=ffd2b5a3-0e8e-4f9b-9288-cff133a90145 InstallationDate: Installed on 2011-12-18 (1268 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) InterpreterPath: /usr/bin/python3.4 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic root=UUID=9f13b409-27bd-4e42-99c0-59fccdb87241 ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-53-generic N/A linux-backports-modules-3.13.0-53-generic N/A linux-firmware 1.127.12 RfKill: SourcePackage: linux Title: [System manufacturer System Product Name] hibernate/resume failure UpgradeStatus: Upgraded to trusty on 2014-08-18 (295 days ago) UserGroups: dmi.bios.date: 07/15/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0401 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z68-V LX dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0401:bd07/15/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP8Z68-VLX:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463222/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1454944] Re: [Lenovo T450] fwts high failues were found.
\_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch is the result of Nvidia passing incorrect type to _DSM. If Optimus works without any problem, it can be safely ignored. For unknown reasons both open-source and proprietary drivers suffer from the same problem. Nvidia really needs to look into their drivers -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1454944 Title: [Lenovo T450] fwts high failues were found. Status in HWE Next Project: In Progress Status in linux-lts-utopic package in Ubuntu: Incomplete Bug description: CID : 201502-16842 Lenovo T450 Steps: 1. Install ubuntu14.04.2 on Lenovo T450. 2. Install Plainbox. 3. Execute canonical-certifcation-client, 4. Select test case 'firmware/fwts_desktop_diagnosis' 5. Execute the test. Actual result: There are some errors in fwts log, please refer to fwts logs in attachment. Expect result: Test case execute smoothly, there is no error in fwts log. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: u 1655 F pulseaudio /dev/snd/controlC0: u 1655 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=01240a83-2e9e-4951-8c40-94b759934ce3 InstallationDate: Installed on 2015-05-11 (3 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) MachineType: LENOVO 20BUZ0BTUS Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic root=UUID=18c52354-b721-4d40-b110-39737086d3d1 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3 RelatedPackageVersions: linux-restricted-modules-3.16.0-30-generic N/A linux-backports-modules-3.16.0-30-generic N/A linux-firmware 1.127.11 Tags: trusty Uname: Linux 3.16.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/03/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JBET45WW (1.10 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BUZ0BTUS dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJBET45WW(1.10):bd02/03/2015:svnLENOVO:pn20BUZ0BTUS:pvrThinkPadT450:rvnLENOVO:rn20BUZ0BTUS:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20BUZ0BTUS dmi.product.version: ThinkPad T450 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1454944/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1449853] Re: Intel 7265 WiFi adapter [8086:095a] (rev 59) doesn't work with current firmware version
@Zima, please paste your lspci output and dmesg into a *new* bug, it must be another firmware issue(different revision sth.) ** Summary changed: - Intel 7265 WiFi adapter doesn't work with current firmware version + Intel 7265 WiFi adapter [8086:095a] (rev 59) doesn't work with current firmware version -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1449853 Title: Intel 7265 WiFi adapter [8086:095a] (rev 59) doesn't work with current firmware version Status in HWE Next Project: In Progress Status in linux-firmware package in Ubuntu: Confirmed Status in linux-firmware source package in Trusty: Fix Committed Status in linux-firmware source package in Utopic: Invalid Bug description: 03:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 59) Current linux-firmware version is 1.127.11 in trusty-updates, which doesn't work, but 1.143 with 3.19kernel in vivid works. Need to upgrade firmware version and firmware API in driver. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1449853/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1434023] Re: ISST-LTE:Ubuntu15.04:20150318:kdump: linux-crashdump packages install using apt-get will stuck
** Tags removed: architecture-ppc64 ** Tags added: architecture-ppc64le -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1434023 Title: ISST-LTE:Ubuntu15.04:20150318:kdump: linux-crashdump packages install using apt-get will stuck Status in linux package in Ubuntu: Confirmed Bug description: == Comment: #0 - Hemant Kumar hemantkba...@in.ibm.com - 2015-03-19 04:25:43 == Defect Description: --- I have installed ubuntu15.04 daily build (20150318). After installation i tried installing kdump package linux-crashdump using apt-get. apt-get install linux-crashdump And after package installation it will stuck and will not give prompt. here is output: root@highlp2:/home/hemant# apt-get install linux-crashdump Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: apport apport-symptoms binutils crash kdump-tools kexec-tools libdw1 libpolkit-agent-1-0 libpolkit-backend-1-0 makedumpfile policykit-1 python3-apport python3-problem-report Suggested packages: apport-gtk apport-kde binutils-doc python3-launchpadlib The following NEW packages will be installed: apport apport-symptoms binutils crash kdump-tools kexec-tools libdw1 libpolkit-agent-1-0 libpolkit-backend-1-0 linux-crashdump makedumpfile policykit-1 python3-apport python3-problem-report 0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. Need to get 5,514 kB of archives. After this operation, 30.5 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://ports.ubuntu.com/ubuntu-ports/ vivid/main libdw1 ppc64el 0.160-0ubuntu3 [161 kB] Get:2 http://ports.ubuntu.com/ubuntu-ports/ vivid/main libpolkit-agent-1-0 ppc64el 0.105-8ubuntu2 [14.6 kB] Get:3 http://ports.ubuntu.com/ubuntu-ports/ vivid/main libpolkit-backend-1-0 ppc64el 0.105-8ubuntu2 [33.5 kB] Get:4 http://ports.ubuntu.com/ubuntu-ports/ vivid/main python3-problem-report all 2.16.2-0ubuntu3 [10.2 kB] Get:5 http://ports.ubuntu.com/ubuntu-ports/ vivid/main python3-apport all 2.16.2-0ubuntu3 [75.8 kB] Get:6 http://ports.ubuntu.com/ubuntu-ports/ vivid/main apport all 2.16.2-0ubuntu3 [113 kB] Get:7 http://ports.ubuntu.com/ubuntu-ports/ vivid/main apport-symptoms all 0.20 [14.2 kB] Get:8 http://ports.ubuntu.com/ubuntu-ports/ vivid/main binutils ppc64el 2.25-5ubuntu1 [2,184 kB] Get:9 http://ports.ubuntu.com/ubuntu-ports/ vivid/main crash ppc64el 7.0.8-1ubuntu1 [2,664 kB] Get:10 http://ports.ubuntu.com/ubuntu-ports/ vivid/main makedumpfile ppc64el 1:1.5.7-5 [99.8 kB] Get:11 http://ports.ubuntu.com/ubuntu-ports/ vivid/main kexec-tools ppc64el 1:2.0.7-5ubuntu2 [73.8 kB] Get:12 http://ports.ubuntu.com/ubuntu-ports/ vivid/main kdump-tools all 1:1.5.7-5 [16.2 kB] Get:13 http://ports.ubuntu.com/ubuntu-ports/ vivid/main linux-crashdump ppc64el 3.19.0.9.8 [2,550 B] Get:14 http://ports.ubuntu.com/ubuntu-ports/ vivid/main policykit-1 ppc64el 0.105-8ubuntu2 [50.7 kB] Fetched 5,514 kB in 0s (31.4 MB/s) Preconfiguring packages ... Package configuration ?? Configuring kexec-tools ?? ? ? ? If you choose this option, a system reboot will trigger a restart into a ? ? kernel loaded by kexec instead of going through the full system boot ? ? loader process. ? ? ? ? Should kexec-tools handle reboots?? ? ? ?Yes No ? ? ? ? Selecting previously unselected package libdw1:ppc64el. (Reading database ... 48391 files and directories currently installed.) Preparing to unpack .../libdw1_0.160-0ubuntu3_ppc64el.deb ... Unpacking libdw1:ppc64el (0.160-0ubuntu3) ... [ 81.163819] sda2: WRITE SAME failed. Manually zeroing. Selecting previously unselected package libpolkit-agent-1-0:ppc64el. Preparing to unpack .../libpolkit-agent-1-0_0.105-8ubuntu2_ppc64el.deb ... Unpacking libpolkit-agent-1-0:ppc64el (0.105-8ubuntu2) ... Selecting previously unselected package libpolkit-backend-1-0:ppc64el. Preparing to unpack .../libpolkit-backend-1-0_0.105-8ubuntu2_ppc64el.deb ... Unpacking libpolkit-backend-1-0:ppc64el (0.105-8ubuntu2) ... Selecting previously unselected package python3-problem-report. Preparing to unpack
[Kernel-packages] [Bug 1463222] [NEW] [System manufacturer System Product Name] hibernate/resume failure
Public bug reported: Last activity was hibernate. Upon wake-up (touch spacebar), problems. The system did start without me having to cycle power, etc. and I ended up here. I'm a linux user, not a programmer. If you want more info, you will have to ask and work with me. Thanks! ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-53-generic 3.13.0-53.89 ProcVersionSignature: Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19 Uname: Linux 3.13.0-53-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: don1948 F pulseaudio /dev/snd/controlC0: don1948 F pulseaudio CurrentDmesg: [ 31.115976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Mon Jun 8 20:44:19 2015 DuplicateSignature: hibernate/resume:System manufacturer System Product Name:0401 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=ffd2b5a3-0e8e-4f9b-9288-cff133a90145 InstallationDate: Installed on 2011-12-18 (1268 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) InterpreterPath: /usr/bin/python3.4 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic root=UUID=9f13b409-27bd-4e42-99c0-59fccdb87241 ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-53-generic N/A linux-backports-modules-3.13.0-53-generic N/A linux-firmware 1.127.12 RfKill: SourcePackage: linux Title: [System manufacturer System Product Name] hibernate/resume failure UpgradeStatus: Upgraded to trusty on 2014-08-18 (295 days ago) UserGroups: dmi.bios.date: 07/15/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0401 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z68-V LX dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0401:bd07/15/2011:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP8Z68-VLX:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-kerneloops hibernate resume trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463222 Title: [System manufacturer System Product Name] hibernate/resume failure Status in linux package in Ubuntu: Confirmed Bug description: Last activity was hibernate. Upon wake-up (touch spacebar), problems. The system did start without me having to cycle power, etc. and I ended up here. I'm a linux user, not a programmer. If you want more info, you will have to ask and work with me. Thanks! ProblemType: KernelOops DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-53-generic 3.13.0-53.89 ProcVersionSignature: Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19 Uname: Linux 3.13.0-53-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: don1948 F pulseaudio /dev/snd/controlC0: don1948 F pulseaudio CurrentDmesg: [ 31.115976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Mon Jun 8 20:44:19 2015 DuplicateSignature: hibernate/resume:System manufacturer System Product Name:0401 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=ffd2b5a3-0e8e-4f9b-9288-cff133a90145 InstallationDate: Installed on 2011-12-18 (1268 days ago) InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) InterpreterPath: /usr/bin/python3.4 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb
[Kernel-packages] [Bug 1454944] Re: [Lenovo T450] fwts high failues were found.
There are two high failures as below: ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD ** Changed in: hwe-next Status: New = In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1454944 Title: [Lenovo T450] fwts high failues were found. Status in HWE Next Project: In Progress Status in linux-lts-utopic package in Ubuntu: Incomplete Bug description: CID : 201502-16842 Lenovo T450 Steps: 1. Install ubuntu14.04.2 on Lenovo T450. 2. Install Plainbox. 3. Execute canonical-certifcation-client, 4. Select test case 'firmware/fwts_desktop_diagnosis' 5. Execute the test. Actual result: There are some errors in fwts log, please refer to fwts logs in attachment. Expect result: Test case execute smoothly, there is no error in fwts log. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: u 1655 F pulseaudio /dev/snd/controlC0: u 1655 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=01240a83-2e9e-4951-8c40-94b759934ce3 InstallationDate: Installed on 2015-05-11 (3 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) MachineType: LENOVO 20BUZ0BTUS Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic root=UUID=18c52354-b721-4d40-b110-39737086d3d1 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3 RelatedPackageVersions: linux-restricted-modules-3.16.0-30-generic N/A linux-backports-modules-3.16.0-30-generic N/A linux-firmware 1.127.11 Tags: trusty Uname: Linux 3.16.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/03/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JBET45WW (1.10 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BUZ0BTUS dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJBET45WW(1.10):bd02/03/2015:svnLENOVO:pn20BUZ0BTUS:pvrThinkPadT450:rvnLENOVO:rn20BUZ0BTUS:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20BUZ0BTUS dmi.product.version: ThinkPad T450 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1454944/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1454944] Re: [Lenovo T450] fwts high failues were found.
ACPI _DOD is used to enumerate all devices attached to display adapter and is used for output switching. This is used in acpi video driver but I suspect actual feature is impact. Especially, many laptop generates super+p instead of ACPI event after Windows 7. Please check with video switching hotkey works as expected. If so, this can be ignored too. ** Changed in: hwe-next Status: In Progress = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1454944 Title: [Lenovo T450] fwts high failues were found. Status in HWE Next Project: Incomplete Status in linux-lts-utopic package in Ubuntu: Incomplete Bug description: CID : 201502-16842 Lenovo T450 Steps: 1. Install ubuntu14.04.2 on Lenovo T450. 2. Install Plainbox. 3. Execute canonical-certifcation-client, 4. Select test case 'firmware/fwts_desktop_diagnosis' 5. Execute the test. Actual result: There are some errors in fwts log, please refer to fwts logs in attachment. Expect result: Test case execute smoothly, there is no error in fwts log. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: u 1655 F pulseaudio /dev/snd/controlC0: u 1655 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=01240a83-2e9e-4951-8c40-94b759934ce3 InstallationDate: Installed on 2015-05-11 (3 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) MachineType: LENOVO 20BUZ0BTUS Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-30-generic root=UUID=18c52354-b721-4d40-b110-39737086d3d1 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3 RelatedPackageVersions: linux-restricted-modules-3.16.0-30-generic N/A linux-backports-modules-3.16.0-30-generic N/A linux-firmware 1.127.11 Tags: trusty Uname: Linux 3.16.0-30-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/03/2015 dmi.bios.vendor: LENOVO dmi.bios.version: JBET45WW (1.10 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BUZ0BTUS dmi.board.vendor: LENOVO dmi.board.version: SDK0E50510 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJBET45WW(1.10):bd02/03/2015:svnLENOVO:pn20BUZ0BTUS:pvrThinkPadT450:rvnLENOVO:rn20BUZ0BTUS:rvrSDK0E50510WIN:cvnLENOVO:ct10:cvrNone: dmi.product.name: 20BUZ0BTUS dmi.product.version: ThinkPad T450 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1454944/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462766] Re: Bluetooth adapter is there or not.
Dear Christopher M. Penalver (penalvch), Many many thanks for your quick and very helpful suggestion which I shall keep close to my heart. The ASUS laptop was purchased for a monastic brother who is a novice in computer parlance. I have set up the laptop with Ubuntu 14.04 and updates so far. So he has LibreOffice (with British English spelling check), excel, etc. I have installed GIMP if at all he will ever use Image editing. I have installed Youtube-dl so he can download. Then I have given him the important VLC for seeing videos and listening to songs and prayer music. I have ordered for a wireless optical mouse so that the only available two USB ports can be of use to him. The card reader and wireless are active. So this is all he will probably need. Against this backdrop, there is the fear of my getting the motherboard screwed up and winding up in additional expenses. So I will reserve the BIOS update until when the user monk is keen on using Bluetooth enabled devices. Many many thanks once again. I was hoping that there could be a very simple solution. I have spent quite some time with the internet! Suggestions were plenty but nothing promising. If I can find where to do it, I shall mark the status as confirmed as suggested. Satyapriyananda ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462766 Title: Bluetooth adapter is there or not. Status in linux package in Ubuntu: Confirmed Bug description: Bluetooth Manager does not find adapter or device. Output of: sudo cat /sys/kernel/debug/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 2, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 3.13 S: Manufacturer=Linux 3.13.0-53-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07e6 Rev= 0.14 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=1bcf ProdID=0007 Rev= 0.13 S: Product=USB Optical Mouse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 7 Ivl=10ms T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=b483 Rev=99.14 S: Product=USB2.0 VGA UVC WebCam C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=200mA A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo E: Ad=83(I) Atr=03(Int.) MxPS= 23 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 0 Ivl=125us T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=2006 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=ACB57DABFFC5 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I)
[Kernel-packages] [Bug 1437100] Re: [MSI MS-7693] suspend/resume failure
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1437100 Title: [MSI MS-7693] suspend/resume failure Status in linux package in Ubuntu: Expired Bug description: During the system tests the computer went into suspension and it didn't resume. ProblemType: KernelOops DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-10-generic 3.19.0-10.10 [modified: boot/vmlinuz-3.19.0-10-generic] ProcVersionSignature: Ubuntu 3.19.0-10.10-generic 3.19.2 Uname: Linux 3.19.0-10-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.16.2-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lightdm 993 F pulseaudio reaperofshred 1762 F pulseaudio /dev/snd/controlC0: lightdm 993 F pulseaudio reaperofshred 1762 F pulseaudio Date: Fri Mar 27 01:03:18 2015 DuplicateSignature: suspend/resume:MSI MS-7693:V2.6 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=a64a8a9c-aad8-4a37-a1dd-74dfe4f05caf InstallationDate: Installed on 2015-03-27 (0 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Beta amd64 (20150326) InterpreterPath: /usr/bin/python3.4 MachineType: MSI MS-7693 ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-10-generic root=UUID=eefdb7e3-3eaa-4b3f-8e22-cdeb5e869ba1 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.19.0-10-generic N/A linux-backports-modules-3.19.0-10-generic N/A linux-firmware 1.143 SourcePackage: linux Title: [MSI MS-7693] suspend/resume failure UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 10/08/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V2.6 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: 970A-G46 (MS-7693) dmi.board.vendor: MSI dmi.board.version: 2.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV2.6:bd10/08/2013:svnMSI:pnMS-7693:pvr2.0:rvnMSI:rn970A-G46(MS-7693):rvr2.0:cvnMSI:ct3:cvr2.0: dmi.product.name: MS-7693 dmi.product.version: 2.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1437100/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1286192] Re: [Lenovo IdeaPad Flex 14 NoteBook] Full System freeze
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1286192 Title: [Lenovo IdeaPad Flex 14 NoteBook] Full System freeze Status in linux package in Ubuntu: Expired Bug description: System completely freezes randomly, mostly when running firefox. without intervention It happens in 2 stages: 1. first it locks everything up, except for my mouse and keyboard. 2. shortly after that the mouse and keyboard lock up and my system freezes. If i can still use my keyboard in stage 1 and press ctr + alt + F2 I get these messages in the console: Feb 28 14:07:21 Shinobu kernel: [ 1625.147864] [drm:i915_hangcheck_elapsed] *ERROR* stuck on render ring Feb 28 14:07:21 Shinobu kernel: [ 1625.147868] [drm] capturing error event; look for more information in /sys/kernel/debug/dri/0/i915_error_state Feb 28 14:07:21 Shinobu kernel: [ 1625.152227] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152242] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152256] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152281] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152294] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152307] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152320] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152334] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152347] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152360] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152385] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152399] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152423] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152437] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152462] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152475] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152488] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152513] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152526] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152540] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152553] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152578] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152603] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152628] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152642] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152655] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152668] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt Feb 28 14:07:21 Shinobu kernel: [ 1625.152682] [drm:ivybridge_irq_handler] *ERROR* Unclaimed register before interrupt After switching back to the gui with ctr+alt+F7 the system will again continue to run normally (I no expert but i looks like it). Added the full kernlog file If you need more info let me know. I have run memtest86+ ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-17-generic 3.11.0-17.31 ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3 Uname: Linux 3.11.0-17-generic x86_64 ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 AudioDevicesInUse:
[Kernel-packages] [Bug 1463257] Re: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured
** Package changed: linux-meta (Ubuntu) = linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463257 Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured Status in linux package in Ubuntu: New Bug description: Just pops up after logging in. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: linux-headers-generic 3.13.0.53.60 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 AptdaemonVersion: 1.1.1-1ubuntu5.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lib2729 F pulseaudio /dev/snd/controlC0: lib2729 F pulseaudio Date: Tue Jun 9 14:31:46 2015 DuplicateSignature: package:linux-headers-generic:3.13.0.53.60:package linux-headers-generic is already installed and configured ErrorMessage: package linux-headers-generic is already installed and configured HibernationDevice: RESUME=UUID=b5d97b86-d1d0-4a89-9992-7fb7dca1ef01 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=50b3d337-f43d-4bc4-85ab-067ef5365b5a ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.2 RfKill: SourcePackage: linux-meta Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/08/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97M-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd04/08/2015:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH97M-PLUS:rvrRevX.0x:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463257/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463257] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463257 Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured Status in linux package in Ubuntu: Confirmed Bug description: Just pops up after logging in. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: linux-headers-generic 3.13.0.53.60 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 AptdaemonVersion: 1.1.1-1ubuntu5.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lib2729 F pulseaudio /dev/snd/controlC0: lib2729 F pulseaudio Date: Tue Jun 9 14:31:46 2015 DuplicateSignature: package:linux-headers-generic:3.13.0.53.60:package linux-headers-generic is already installed and configured ErrorMessage: package linux-headers-generic is already installed and configured HibernationDevice: RESUME=UUID=b5d97b86-d1d0-4a89-9992-7fb7dca1ef01 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=50b3d337-f43d-4bc4-85ab-067ef5365b5a ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.2 RfKill: SourcePackage: linux-meta Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/08/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97M-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd04/08/2015:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH97M-PLUS:rvrRevX.0x:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463257/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1436620] Re: Bluetooth USB interrupt suspended state on Surface Pro 3
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1436620 Title: Bluetooth USB interrupt suspended state on Surface Pro 3 Status in linux package in Ubuntu: Expired Bug description: [Please note: this information was collected using 3.16.0-33 but actually is talking about behavior under 4.0.0-RC4 with four specific patches described at the end of the note.] 1. When suspending (i.e. freezing in this situation), it is never certain that it will stay suspended. About half the time it simply bounces back in the same way that suspending without the freeze patch does. 2. If Bluetooth is on or if a Gigaware USB hub is connected to a USB port, the freeze never seems to last very long. It doesn't always bounce right back but it usually comes back within a few minutes. (I have the latest version of mwifiex firmware.) Not all USB devices cause this problem; e.g. I have a Microsoft wireless keyboard and mouse with a tiny USB transceiver that does not affect suspension. The patches are: - (not involved) The addition of the two Microsoft cameras in the kernel, drivers/media/usb/uvc/uvc_driver.c. - (not involved) The acpi battery-detecting patch described in kernel bugzilla bug 90161. - Modification of /usr/lib/pm-utils/pm-functions as described in Launchpad bug 1380076 to use the freeze methodology for suspending. Without this modification all attempts at suspending bounce back immediately; thus the behavior described in this bug cannot be observed. - The surface_buttons.c patch described in kernel bugzilla bug 84651; without this it is nearly impossible to get out of a freeze once you've gotten into it. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-33-generic 3.16.0-33.44 ProcVersionSignature: Ubuntu 3.16.0-33.44-generic 3.16.7-ckt7 Uname: Linux 3.16.0-33-generic x86_64 ApportVersion: 2.14.7-0ubuntu8.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: keith 2741 F pulseaudio /dev/snd/controlC0: keith 2741 F pulseaudio /dev/snd/controlC1: keith 2741 F pulseaudio CurrentDesktop: Unity Date: Wed Mar 25 20:17:17 2015 HibernationDevice: RESUME=UUID=a84237b2-3192-4b08-a535-d5561688b546 InstallationDate: Installed on 2015-01-05 (79 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: Microsoft Corporation Surface Pro 3 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-33-generic.efi.signed root=UUID=07a2b8fb-d17a-4e67-a4d5-39ece3561dc4 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-33-generic N/A linux-backports-modules-3.16.0-33-generic N/A linux-firmware 1.138.1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/19/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3.11.0450 dmi.board.asset.tag: 0 dmi.board.name: Surface Pro 3 dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 9 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3.11.0450:bd11/19/2014:svnMicrosoftCorporation:pnSurfacePro3:pvr1:rvnMicrosoftCorporation:rnSurfacePro3:rvr1:cvnMicrosoftCorporation:ct9:cvr1: dmi.product.name: Surface Pro 3 dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436620/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1463257] [NEW] package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured
Public bug reported: Just pops up after logging in. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: linux-headers-generic 3.13.0.53.60 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 AptdaemonVersion: 1.1.1-1ubuntu5.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lib2729 F pulseaudio /dev/snd/controlC0: lib2729 F pulseaudio Date: Tue Jun 9 14:31:46 2015 DuplicateSignature: package:linux-headers-generic:3.13.0.53.60:package linux-headers-generic is already installed and configured ErrorMessage: package linux-headers-generic is already installed and configured HibernationDevice: RESUME=UUID=b5d97b86-d1d0-4a89-9992-7fb7dca1ef01 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=50b3d337-f43d-4bc4-85ab-067ef5365b5a ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.2 RfKill: SourcePackage: linux-meta Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/08/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97M-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd04/08/2015:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH97M-PLUS:rvrRevX.0x:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: already-installed amd64 apport-package trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1463257 Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured Status in linux package in Ubuntu: New Bug description: Just pops up after logging in. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: linux-headers-generic 3.13.0.53.60 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 AptdaemonVersion: 1.1.1-1ubuntu5.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lib2729 F pulseaudio /dev/snd/controlC0: lib2729 F pulseaudio Date: Tue Jun 9 14:31:46 2015 DuplicateSignature: package:linux-headers-generic:3.13.0.53.60:package linux-headers-generic is already installed and configured ErrorMessage: package linux-headers-generic is already installed and configured HibernationDevice: RESUME=UUID=b5d97b86-d1d0-4a89-9992-7fb7dca1ef01 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=50b3d337-f43d-4bc4-85ab-067ef5365b5a ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.2 RfKill: SourcePackage: linux-meta Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/08/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97M-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd04/08/2015:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH97M-PLUS:rvrRevX.0x:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: All Series dmi.product.version: System
[Kernel-packages] [Bug 1463257] Re: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1463257 Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured Status in linux package in Ubuntu: New Bug description: Just pops up after logging in. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: linux-headers-generic 3.13.0.53.60 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 AptdaemonVersion: 1.1.1-1ubuntu5.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: lib2729 F pulseaudio /dev/snd/controlC0: lib2729 F pulseaudio Date: Tue Jun 9 14:31:46 2015 DuplicateSignature: package:linux-headers-generic:3.13.0.53.60:package linux-headers-generic is already installed and configured ErrorMessage: package linux-headers-generic is already installed and configured HibernationDevice: RESUME=UUID=b5d97b86-d1d0-4a89-9992-7fb7dca1ef01 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=50b3d337-f43d-4bc4-85ab-067ef5365b5a ro nomdmonddf nomdmonisw nomdmonddf nomdmonisw PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.2 RfKill: SourcePackage: linux-meta Title: package linux-headers-generic 3.13.0.53.60 failed to install/upgrade: package linux-headers-generic is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/08/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2501 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H97M-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2501:bd04/08/2015:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH97M-PLUS:rvrRevX.0x:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1463257/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462614] Re: Atheros bluetooth doesn't find the devices
Patch applied upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1462614 Title: Atheros bluetooth doesn't find the devices Status in linux-lts-utopic package in Ubuntu: In Progress Bug description: I have a laptop Acer v15 with Qualcom Atheros bluetooth and Logitech M557 mouse, which worked well initially. Then after disconnecting the mouse, my bluetooth adapter can't find any bluetooth devices nearby (I've also tried the Samsung s4). This bug is reproducable in Elementary OS 0.3, Ubuntu 15.04 and 14.04, Mint 17.1 and 17. Here are some outputs from terminal: $ lsusb Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 04f2:b474 Chicony Electronics Co., Ltd Bus 003 Device 003: ID 06cb:2970 Synaptics, Inc. Bus 003 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 005: ID 0489:e076 Foxconn / Hon Hai Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ hciconfig hci0: Type: BR/EDR Bus: USB BD Address: C0:38:96:6C:06:7E ACL MTU: 1022:8 SCO MTU: 183:5 UP RUNNING PSCAN ISCAN RX bytes:1725 acl:0 sco:0 events:164 errors:0 TX bytes:3394 acl:0 sco:0 commands:151 errors:0 $ sudo awk -vRS= '/e076/' /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=05 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Thanks to @Pilot6 for help with debugging this. Initial question started on askubuntu.com http://askubuntu.com/questions/632589/bluetooth-doesnt-find-the-devices ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.16.0-38-generic 3.16.0-38.52~14.04.1 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 Uname: Linux 3.16.0-38-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 CurrentDesktop: Unity Date: Sat Jun 6 14:38:16 2015 InstallationDate: Installed on 2015-06-06 (0 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) SourcePackage: linux-lts-utopic UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1457369] Re: kernel 3.19.0-18 breaks HDMI audio for snd_hda_intel
Confirmed, fixed my issue as well. Thanks ! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1457369 Title: kernel 3.19.0-18 breaks HDMI audio for snd_hda_intel Status in System76: Triaged Status in linux package in Ubuntu: Fix Released Status in linux source package in Vivid: Fix Committed Bug description: Problem appears on multiple computers with exact same kernel update, so clearly the problem is within the kernel. 3.19.0-16 did work without any problems. Before sound worked great via HDMI, now the HDMI output is not visible in neither alsamixer nor pulseaudio. Audio via the headphone jack still works. The computers are Intel-NUC-Kit-D54250WYK: 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a26] (rev 09) Subsystem: Intel Corporation Device [8086:2054] Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 09) Subsystem: Intel Corporation Device [8086:2054] Kernel driver in use: snd_hda_inte dmesg gives: [3.178745] sound hdaudioC1D0: autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp [3.178750] sound hdaudioC1D0:speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [3.178753] sound hdaudioC1D0:hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [3.178754] sound hdaudioC1D0:mono: mono_out=0x0 [3.178756] sound hdaudioC1D0:inputs: [3.178759] sound hdaudioC1D0: Mic=0x19 ... [3.215371] snd_hda_intel :00:03.0: Cannot turn on display power on i915 ... [3.297561] [drm] Initialized i915 1.6.0 20141121 for :00:02.0 on minor 0 ... [3.304357] i915 :00:02.0: fb0: inteldrmfb frame buffer device [3.304360] i915 :00:02.0: registered panic notifier --- ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: maarten1669 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 15.04 Lsusb: Bus 001 Device 008: ID 8087:07dc Intel Corp. Bus 001 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=6c65d9ee-31fe-4832-8907-f47ac02d6f83 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip fuse lp lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 04/10/2015 dmi.bios.vendor: Intel Corp. dmi.bios.version: WYLPT10H.86A.0038.2015.0410.1634 dmi.board.name: D54250WYK dmi.board.vendor: Intel Corporation dmi.board.version: H13922-302 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrWYLPT10H.86A.0038.2015.0410.1634:bd04/10/2015:svn:pn:pvr:rvnIntelCorporation:rnD54250WYK:rvrH13922-302:cvn:ct3:cvr: --- ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: maarten1669 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 15.04 Lsusb: Bus 001 Device 008: ID 8087:07dc Intel Corp. Bus 001 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=6c65d9ee-31fe-4832-8907-f47ac02d6f83 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 Tags: vivid UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip fuse lp lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 04/10/2015 dmi.bios.vendor: Intel Corp. dmi.bios.version: WYLPT10H.86A.0038.2015.0410.1634 dmi.board.name: D54250WYK dmi.board.vendor: Intel Corporation dmi.board.version: H13922-302 dmi.chassis.type: 3 dmi.modalias:
[Kernel-packages] [Bug 1427680] Re: bluetooth on asus n551 not working
Patch applied upstream. ** Changed in: linux (Ubuntu) Status: Confirmed = In Progress -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1427680 Title: bluetooth on asus n551 not working Status in linux package in Ubuntu: In Progress Bug description: can't configure any bluetooth device with this laptop. bluetooth adapter is recognized and all seem working but it is unable to find any device on a scan. i tried installing blueman also but either it is unable to find any device. i've also read many posts with bluetooth solutions for 14.04 but none helped to solve the situation. i've also tried a mainline kernel (3.19) with no changes. currently i'm using 3.13.0-46-generic on the attached archive some files taken from the laptop (lspci,lsusb,rfkill list,dmesg |grep Blue,lsmod and the output of hciconfig -a) there are no evidences of problems but the bluetooth don't work. unluckly even the touchpad don't work so well on this laptop, so having to use the mouse is a pain late addition- i forgot to tell, on my dual boot system, the microsoft sculpt mouse bluetooth works as expected on windows 7 Ubuntu is not able to see any blutooth device, i have tried 2 phones and this ms mouse, and is not seen by the phones also. --- ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: hook 2242 F pulseaudio /dev/snd/controlC1: hook 2242 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=4e7d3097-1e36-4191-98d8-df04a9ce48d2 InstallationDate: Installed on 2012-11-06 (847 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MachineType: ASUSTeK COMPUTER INC. N551JM NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-46-generic root=UUID=822863c8-1a3d-4ef2-8f89-0a2e8dc58ab9 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-46.77-generic 3.13.11-ckt15 RelatedPackageVersions: linux-restricted-modules-3.13.0-46-generic N/A linux-backports-modules-3.13.0-46-generic N/A linux-firmware 1.127.11 Tags: trusty Uname: Linux 3.13.0-46-generic x86_64 UpgradeStatus: Upgraded to trusty on 2015-01-04 (57 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/06/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N551JM.204 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N551JM dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN551JM.204:bd10/06/2014:svnASUSTeKCOMPUTERINC.:pnN551JM:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN551JM:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N551JM dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1427680/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1449910] Re: System hangs apparently randomly when creating LVM snapshots
So, all the systems have been up and running for 35 nights as of now. The upstream kernel is doing good. What can we do from here? Thank you for your help. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1449910 Title: System hangs apparently randomly when creating LVM snapshots Status in linux package in Ubuntu: Confirmed Bug description: We have several servers here which mount Ubuntu LTS Trusty Tahr 14.04. We use LVM snapshots to do backups during the night. Randomly (witha rate of 1 event every 10-12 days) the LVM snapshot creation runs in some problem. The server hangs and it must be rebooted hardly. No shell, no even any screen output, just a black screen, no ping, nothing. And Magic SysRq key doesn't help. No logs are written either (I also tried redirect logs to another machine, just in case). This happens with different hardware, and different backup software. The only constant is LVM snapshots. Kernel is 3.13.0-49. We tried the 14.10 kernel (3.16.0-34), we had the same hangs, but this time we had something logged: Apr 21 23:02:56 server-name kernel: [654840.108023] INFO: task kswapd0:50 blocked for more than 120 seconds. Apr 21 23:02:56 server-name kernel: [654840.108145] Not tainted 3.16.0-34-generic #47~14.04.1-Ubuntu Apr 21 23:02:56 server-name kernel: [654840.108245] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. Apr 21 23:02:56 server-name kernel: [654840.108361] kswapd0 D 88007fc130c0 050 2 0x Apr 21 23:02:56 server-name kernel: [654840.108367] 880077bcf998 0046 880077bd 880077bcffd8 Apr 21 23:02:56 server-name kernel: [654840.108372] 000130c0 000130c0 88007bdef010 c90010d3c000 Apr 21 23:02:56 server-name kernel: [654840.108377] c90010d3c0d8 c90010d3c000 Apr 21 23:02:56 server-name kernel: [654840.108382] Call Trace: /0x70 Apr 21 23:02:56 server-name kernel: [654840.108419] [c0707aad] reiserfs_wait_on_write_block+0x4d/0x80 [reiserfs] Apr 21 23:02:56 server-name kernel: [654840.108426] [810b4d70] ? prepare_to_wait_event+0x100/0x100 Apr 21 23:02:56 server-name kernel: [654840.108437] [c0709271] do_journal_begin_r+0xe1/0x3e0 [reiserfs] Apr 21 23:02:56 server-name kernel: [654840.108443] [810a5fa8] ? __enqueue_entity+0x78/0x80 Apr 21 23:02:56 server-name kernel: [654840.108454] [c070967a] journal_begin+0x8a/0x160 [reiserfs] Apr 21 23:02:56 server-name kernel: [654840.108464] [c06f67fc] reiserfs_release_dquot+0x4c/0xd0 [reiserfs] Apr 21 23:02:56 server-name kernel: [654840.108470] [813ab4f1] ? __percpu_counter_add+0x51/0x70 Apr 21 23:02:56 server-name kernel: [654840.108476] [8123003d] dqput+0x9d/0x200 Apr 21 23:02:56 server-name kernel: [654840.108480] [8123166d] __dquot_drop+0x5d/0x70 Apr 21 23:02:56 server-name kernel: [654840.108485] [812316ad] dquot_drop+0x2d/0x40 Apr 21 23:02:56 server-name kernel: [654840.108494] [c06ec7a0] reiserfs_evic t_inode+0xa0/0x180 [reiserfs] Apr 21 23:02:56 server-name kernel: [654840.108501] [811ff7de] ? inode_wait_for_writeback+0x2e/0x40 Apr 21 23:02:56 server-name kernel: [654840.108507] [811eef34] evict+0xb4/0x180 Apr 21 23:02:56 server-name kernel: [654840.108511] [811ef039] dispose_list+0x39/0x50 Apr 21 23:02:56 server-name kernel: [654840.108515] [811eff47] prune_icache_sb+0x47/0x60 Apr 21 23:02:56 server-name kernel: [654840.108520] [811d78f5] super_cache_scan+0x105/0x170 Apr 21 23:02:56 server-name kernel: [654840.108526] [81171b78] shrink_slab_node+0x138/0x290 Apr 21 23:02:56 server-name kernel: [654840.108532] [810f8ccb] ? css_next_descendant_pre+0x3b/0x40 Apr 21 23:02:56 server-name kernel: [654840.108536] [8117367b] shrink_slab+0x8b/0x160 Apr 21 23:02:56 server-name kernel: [654840.108540] [811770e2] balance_pgdat+0x3f2/0x620 Apr 21 23:02:56 server-name kernel: [654840.108544] [8117746b] kswapd+0x15b/0x3f0 Apr 21 23:02:56 server-name kernel: [654840.108549] [810b4d70] ? prepare_to_wait_event+0x100/0x100 Apr 21 23:02:56 server-name kernel: [654840.108552] [81177310] ? balance_pgdat+0x620/0x620 Apr 21 23:02:56 server-name kernel: [654840.108558] [81091332] kthread+0xd2/0xf0 Apr 21 23:02:56 server-name kernel: [654840.108562] [81091260] ? kthread_create_on_node+0x1c0/0x1c0 Apr 21 23:02:56 server-name kernel: [654840.108567] [8176c9bc] ret_from_fork+0x7c/0xb0 Apr 21 23:02:56 server-name kernel: [654840.108571] [81091260] ? kthread_create_on_node+0x1c0/0x1c0 Apr 21 23:02:56 server-name kernel: [654840.108595] INFO: task
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid kernel?
At least this requires the output of multipath -ll and the iscsi setup. Apparently its supporting ALUA, so the targets may be on a real storage server but it would be better you would let us know instead of guessing. Are the errors seen on every boot or just the one time it did not boot? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid kernel? Status in linux package in Ubuntu: Incomplete Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462919] [NEW] kswapd pulls server down every 2 weeks.
Public bug reported: in 15.04 even when having plenty of RAM and swap kswpd uses lots of CPU and might bring the machine down to a crawl making is unable to access it over the network. I say might, because it's only a very clear feeling that I have. I do not know it for sure. Anyway the fact is that I have two server that once every 2 week ends up totally unaccessible from the network. They can be pinged though. Logging in locally takes a long time. Rebooting them locally takes a long time. They have absolutely no noticeable disk IO when in this stalled state. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 jun 8 09:57 seq crw-rw 1 root audio 116, 33 jun 8 09:57 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Mon Jun 8 10:02:44 2015 HibernationDevice: RESUME=UUID=17183f57-6587-47f2-84dc-553f7e5cf3a8 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Intel Corporation S5520UR PciMultimedia: ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=/dev/mapper/vg0-root ro nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-05-16 (22 days ago) dmi.bios.date: 12/17/2009 dmi.bios.vendor: Intel Corp. dmi.bios.version: S5500.86B.01.00.0046.121720091524 dmi.board.asset.tag: dmi.board.name: S5520UR dmi.board.vendor: Intel Corporation dmi.board.version: E22554-606 dmi.chassis.asset.tag: dmi.chassis.type: 23 dmi.chassis.vendor: ... dmi.chassis.version: .. dmi.modalias: dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0046.121720091524:bd12/17/2009:svnIntelCorporation:pnS5520UR:pvr:rvnIntelCorporation:rnS5520UR:rvrE22554-606:cvn...:ct23:cvr..: dmi.product.name: S5520UR dmi.product.version: dmi.sys.vendor: Intel Corporation ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462919 Title: kswapd pulls server down every 2 weeks. Status in linux package in Ubuntu: New Bug description: in 15.04 even when having plenty of RAM and swap kswpd uses lots of CPU and might bring the machine down to a crawl making is unable to access it over the network. I say might, because it's only a very clear feeling that I have. I do not know it for sure. Anyway the fact is that I have two server that once every 2 week ends up totally unaccessible from the network. They can be pinged though. Logging in locally takes a long time. Rebooting them locally takes a long time. They have absolutely no noticeable disk IO when in this stalled state. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 jun 8 09:57 seq crw-rw 1 root audio 116, 33 jun 8 09:57 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Mon Jun 8 10:02:44 2015 HibernationDevice: RESUME=UUID=17183f57-6587-47f2-84dc-553f7e5cf3a8 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Intel Corporation S5520UR PciMultimedia: ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=/dev/mapper/vg0-root ro nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw
[Kernel-packages] [Bug 1446724] Re: server is stable under older kernel (3.2.0-29.46), but crashes under newer kernels
Tang Dahong, you have started a bisect, but did not finish. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1446724 Title: server is stable under older kernel (3.2.0-29.46), but crashes under newer kernels Status in linux package in Ubuntu: Incomplete Bug description: My PC is stable running Ubuntu Server 12.04.5 LTS using the old kernel 3.2.0-29.46. But it crashes whenever I tried to update the kernel to 3.2.0-65.99 or higher (including 14.04.2 LTS). So somewhere between 3.2.0-29.46 and 3.2.0-65.99, changes to the kernel caused my PC to crash (note: I have not tried kernels older than 3.2.0-65.99, so I don't know the exact version that started to cause the crash). I think this is likely a hardware compatibility issue since I could not find any system logs regarding the crashes. My PC is very old (Compaq Evo D510 SFF/07E4h, BIOS 68602 v2.14 08/15/2002), so I am not sure if this bug is worth troubleshooting. In the meantime, I am happy with the performance of my PC running 3.2.0-29.46. But if anyone is interested in troubleshooting this bug, please let me know. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.13.0-32-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3262 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981A at irq 17' Mixer name : 'Analog Devices AD1981A' Components : 'AC97a:41445372' Controls : 26 Simple ctrls : 17 CasperVersion: 1.315.1 DistroRelease: Ubuntu 12.04 IwConfig: lono wireless extensions. eth0 no wireless extensions. LiveMediaBuild: Ubuntu 12.04.5 LTS Precise Pangolin - Release i386 (20140807.1) Lsusb: Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Compaq Evo D510 SFF MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz ProcVersionSignature: Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.79.16 RfKill: Tags: precise running-unity Uname: Linux 3.13.0-32-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/15/2002 dmi.bios.vendor: Compaq dmi.bios.version: 686O2 v2.14 dmi.board.name: 07E4h dmi.board.vendor: Compaq dmi.chassis.type: 15 dmi.chassis.vendor: Compaq dmi.modalias: dmi:bvnCompaq:bvr686O2v2.14:bd08/15/2002:svnCompaq:pnEvoD510SFF:pvr:rvnCompaq:rn07E4h:rvr:cvnCompaq:ct15:cvr: dmi.product.name: Evo D510 SFF dmi.sys.vendor: Compaq To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1446724/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462919] Re: kswapd pulls server down every 2 weeks.
** Changed in: linux (Ubuntu) Importance: Undecided = Critical -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462919 Title: kswapd pulls server down every 2 weeks. Status in linux package in Ubuntu: Confirmed Bug description: in 15.04 even when having plenty of RAM and swap kswpd uses lots of CPU and might bring the machine down to a crawl making is unable to access it over the network. I say might, because it's only a very clear feeling that I have. I do not know it for sure. Anyway the fact is that I have two server that once every 2 week ends up totally unaccessible from the network. They can be pinged though. Logging in locally takes a long time. Rebooting them locally takes a long time. They have absolutely no noticeable disk IO when in this stalled state. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 jun 8 09:57 seq crw-rw 1 root audio 116, 33 jun 8 09:57 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Mon Jun 8 10:02:44 2015 HibernationDevice: RESUME=UUID=17183f57-6587-47f2-84dc-553f7e5cf3a8 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Intel Corporation S5520UR PciMultimedia: ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=/dev/mapper/vg0-root ro nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-05-16 (22 days ago) dmi.bios.date: 12/17/2009 dmi.bios.vendor: Intel Corp. dmi.bios.version: S5500.86B.01.00.0046.121720091524 dmi.board.asset.tag: dmi.board.name: S5520UR dmi.board.vendor: Intel Corporation dmi.board.version: E22554-606 dmi.chassis.asset.tag: dmi.chassis.type: 23 dmi.chassis.vendor: ... dmi.chassis.version: .. dmi.modalias: dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0046.121720091524:bd12/17/2009:svnIntelCorporation:pnS5520UR:pvr:rvnIntelCorporation:rnS5520UR:rvrE22554-606:cvn...:ct23:cvr..: dmi.product.name: S5520UR dmi.product.version: dmi.sys.vendor: Intel Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462919] Re: kswapd pulls server down every 2 weeks.
Søren Holm, thank you for reporting this and helping make Ubuntu better. As per https://downloadcenter.intel.com/product/36456/Intel-Server- Board-S5520UR an update to your computer's buggy and outdated BIOS is available (64;64;26;1.12). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, and the information above is provided, then please mark this report Status Confirmed. Thank you for your understanding. ** Changed in: linux (Ubuntu) Importance: Critical = High -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462919 Title: kswapd pulls server down every 2 weeks. Status in linux package in Ubuntu: Incomplete Bug description: in 15.04 even when having plenty of RAM and swap kswpd uses lots of CPU and might bring the machine down to a crawl making is unable to access it over the network. I say might, because it's only a very clear feeling that I have. I do not know it for sure. Anyway the fact is that I have two server that once every 2 week ends up totally unaccessible from the network. They can be pinged though. Logging in locally takes a long time. Rebooting them locally takes a long time. They have absolutely no noticeable disk IO when in this stalled state. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 jun 8 09:57 seq crw-rw 1 root audio 116, 33 jun 8 09:57 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Mon Jun 8 10:02:44 2015 HibernationDevice: RESUME=UUID=17183f57-6587-47f2-84dc-553f7e5cf3a8 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Intel Corporation S5520UR PciMultimedia: ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=/dev/mapper/vg0-root ro nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-05-16 (22 days ago) dmi.bios.date: 12/17/2009 dmi.bios.vendor: Intel Corp. dmi.bios.version: S5500.86B.01.00.0046.121720091524 dmi.board.asset.tag: dmi.board.name: S5520UR dmi.board.vendor: Intel Corporation dmi.board.version: E22554-606 dmi.chassis.asset.tag: dmi.chassis.type: 23 dmi.chassis.vendor: ... dmi.chassis.version: .. dmi.modalias: dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0046.121720091524:bd12/17/2009:svnIntelCorporation:pnS5520UR:pvr:rvnIntelCorporation:rnS5520UR:rvrE22554-606:cvn...:ct23:cvr..: dmi.product.name: S5520UR dmi.product.version: dmi.sys.vendor: Intel Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458618] Re: linux: 3.13.0-54.91 -proposed tracker
Hardware Certification have completed testing this -proposed kernel. No regressions were observed and results are available here: http://people.canonical.com/~hwcert/sru-testing/trusty/3.13.0-54.91 /trusty-proposed.html ** Tags added: certification-testing-passed ** Changed in: kernel-sru-workflow/certification-testing Status: In Progress = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1458618 Title: linux: 3.13.0-54.91 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux package in Ubuntu: Invalid Status in linux source package in Trusty: Confirmed Bug description: This bug is for tracking the 3.13.0-54.91 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Monday, 25. May 2015 16:17 UTC kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 02:03 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 02:03 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:28 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:28 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Regression-testing-end:Friday, 05. June 2015 17:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458618/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1459068] Re: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker
Hardware Certification have completed testing this -proposed kernel. No regressions were observed and results are available here: http://people.canonical.com/~hwcert/sru- testing/precise/3.13.0-54.91~precise1/precise-3.13-proposed.html ** Tags added: certification-testing-passed ** Changed in: kernel-sru-workflow/certification-testing Status: In Progress = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1459068 Title: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-54.91~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:01 UTC kernel-stable-master-bug:1458618 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:30 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:30 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459068/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462919] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462919 Title: kswapd pulls server down every 2 weeks. Status in linux package in Ubuntu: Confirmed Bug description: in 15.04 even when having plenty of RAM and swap kswpd uses lots of CPU and might bring the machine down to a crawl making is unable to access it over the network. I say might, because it's only a very clear feeling that I have. I do not know it for sure. Anyway the fact is that I have two server that once every 2 week ends up totally unaccessible from the network. They can be pinged though. Logging in locally takes a long time. Rebooting them locally takes a long time. They have absolutely no noticeable disk IO when in this stalled state. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 jun 8 09:57 seq crw-rw 1 root audio 116, 33 jun 8 09:57 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Mon Jun 8 10:02:44 2015 HibernationDevice: RESUME=UUID=17183f57-6587-47f2-84dc-553f7e5cf3a8 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Intel Corporation S5520UR PciMultimedia: ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=/dev/mapper/vg0-root ro nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-05-16 (22 days ago) dmi.bios.date: 12/17/2009 dmi.bios.vendor: Intel Corp. dmi.bios.version: S5500.86B.01.00.0046.121720091524 dmi.board.asset.tag: dmi.board.name: S5520UR dmi.board.vendor: Intel Corporation dmi.board.version: E22554-606 dmi.chassis.asset.tag: dmi.chassis.type: 23 dmi.chassis.vendor: ... dmi.chassis.version: .. dmi.modalias: dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0046.121720091524:bd12/17/2009:svnIntelCorporation:pnS5520UR:pvr:rvnIntelCorporation:rnS5520UR:rvrE22554-606:cvn...:ct23:cvr..: dmi.product.name: S5520UR dmi.product.version: dmi.sys.vendor: Intel Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462766] Re: Bluetooth adapter is there or not.
Satyapriyananda, thank you for reporting this and helping make Ubuntu better. As per https://www.asus.com/Notebooks_Ultrabooks/X553MA/HelpDesk_Download/ an update to your computer's buggy and outdated BIOS is available (211). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, and the information above is provided, then please mark this report Status Confirmed. Thank you for your understanding. ** Description changed: Bluetooth Manager does not find adapter or device. - Output of: + Output of: sudo cat /sys/kernel/debug/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 2, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 3.13 S: Manufacturer=Linux 3.13.0-53-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07e6 Rev= 0.14 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=1bcf ProdID=0007 Rev= 0.13 S: Product=USB Optical Mouse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 7 Ivl=10ms T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=b483 Rev=99.14 S: Product=USB2.0 VGA UVC WebCam C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=200mA A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo E: Ad=83(I) Atr=03(Int.) MxPS= 23 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 0 Ivl=125us T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=2006 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=ACB57DABFFC5 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01
[Kernel-packages] [Bug 1220146] Re: Ralink Mediatek 14c3:7630 wi-fi card isn't supported out of the box
I have the same problem as Quentin. My computer cannot find some networks. Has Anyone an idea about to fix it? Cheers!!! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1220146 Title: Ralink Mediatek 14c3:7630 wi-fi card isn't supported out of the box Status in HWE Next Project: Confirmed Status in HWE Next trusty series: Confirmed Status in The Linux Kernel: Unknown Status in Ubuntu GNOME: New Status in Vivid OPM Workspace: New Status in linux package in Ubuntu: Triaged Status in linux package in Fedora: New Bug description: This device is appearing in some OEM machines, but driver is not yet available in mainline. The driver seems to be present in machines with pre-installed OS, but isn't available on the download-and-install versions! The driver that upstream is working on can be found at https://github.com/lwfinger/mt7630. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1220146/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462761] Re: Macbook Early 2015 TouchPad+Keyboard dont work at all
reroute, could you please advise what release this issue is reproducible with? ** Changed in: linux (Ubuntu) Importance: Undecided = Low ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Tags removed: keyboard macbook trackpad -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462761 Title: Macbook Early 2015 TouchPad+Keyboard dont work at all Status in linux package in Ubuntu: Incomplete Bug description: Also has a wi-fi issue, which doesn't work as well To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462761/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1459957] Re: linux: 3.19.0-20.20 -proposed tracker
Hardware Certification have begun testing this -proposed kernel. ** Changed in: kernel-sru-workflow/certification-testing Status: Confirmed = In Progress ** Changed in: kernel-sru-workflow/certification-testing Assignee: Canonical Hardware Certification (canonical-hw-cert) = Po-Hsu Lin (cypressyew) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1459957 Title: linux: 3.19.0-20.20 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: In Progress Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Vivid: Confirmed Bug description: This bug is for tracking the 3.19.0-20.20 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Friday, 29. May 2015 08:47 UTC kernel-stable-Prepare-package-end:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-start:Friday, 29. May 2015 19:03 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:02 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:02 UTC kernel-stable-Security-signoff-end:Tuesday, 02. June 2015 08:01 UTC kernel-stable-phase:Testing kernel-stable-phase-changed:Friday, 05. June 2015 16:01 UTC kernel-stable-Verification-testing-end:Friday, 05. June 2015 16:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459957/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1442311] Re: Ubuntu 14.04 blank screen after wakeup from sleep
Kenneth Bogert, to see if this is already fixed in a later release, could you please test for this via http://cdimage.ubuntu.com/daily- live/current/ and advise to the results? ** Tags added: regression-release ** Package changed: linux (Ubuntu) = gnome-shell (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1442311 Title: Ubuntu 14.04 blank screen after wakeup from sleep Status in gnome-shell package in Ubuntu: Incomplete Bug description: Possibly related to bug 1283938 . I have disabled lock screen on suspend to try and get around the bug but it obviously hasn't worked. I see a completely black screen with a working mouse cursor. Used Ctrl-Alt-F2 to login at a text terminal and tried to kill gnome- settings-daemon and gnome-shell (doing so has randomly made it work in the past). The gnome-shell process would not kill and I got segfault dmesg errors which are attached. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gnome-shell 3.10.4-0ubuntu5.2 ProcVersionSignature: Ubuntu 3.16.0-33.44~14.04.1-generic 3.16.7-ckt7 Uname: Linux 3.16.0-33-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.8 Architecture: amd64 CurrentDesktop: GNOME Date: Thu Apr 9 14:31:20 2015 DisplayManager: gdm EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-24 (319 days ago) InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release amd64+mac (20140204) SourcePackage: gnome-shell UpgradeStatus: Upgraded to trusty on 2014-09-21 (200 days ago) --- ApportVersion: 2.14.1-0ubuntu3.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kbogert2487 F pulseaudio /dev/snd/controlC1: kbogert2487 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=41830e03-5386-43ed-88b8-1c77dd33df98 InstallationDate: Installed on 2014-05-24 (320 days ago) InstallationMedia: Ubuntu 12.04.4 LTS Precise Pangolin - Release amd64+mac (20140204) MachineType: Dell Inc. Studio XPS 1640 Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-33-generic root=UUID=7ba9d8c6-141e-415a-aae4-fb57486d6148 ro quiet splash radeon.audio=1 noautogroup vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-33.44~14.04.1-generic 3.16.7-ckt7 RelatedPackageVersions: linux-restricted-modules-3.16.0-33-generic N/A linux-backports-modules-3.16.0-33-generic N/A linux-firmware 1.127.11 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: trusty Uname: Linux 3.16.0-33-generic x86_64 UpgradeStatus: Upgraded to trusty on 2014-09-21 (201 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo video _MarkForUpload: True dmi.bios.date: 04/09/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A15 dmi.board.name: 0U785D dmi.board.vendor: Dell Inc. dmi.board.version: A15 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A15 dmi.modalias: dmi:bvnDellInc.:bvrA15:bd04/09/2011:svnDellInc.:pnStudioXPS1640:pvrA153:rvnDellInc.:rn0U785D:rvrA15:cvnDellInc.:ct8:cvrA15: dmi.product.name: Studio XPS 1640 dmi.product.version: A153 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1442311/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1461986] Re: can't change usb_charge attribute in /sys/devices/platform/sony-laptop
I will do it and post back the results tonight, ie after 10 hrs. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1461986 Title: can't change usb_charge attribute in /sys/devices/platform/sony-laptop Status in linux package in Ubuntu: Incomplete Bug description: I am on a Sony VAIO svf43142sn. My laptop has the ability to leave a USB port powered on even after shutdown to charge other devices. The value of /sys/devices/platform/sony-laptop/usb_charge is 1, but the USB port is not powered on. Also when I tried toggling it to 0 it resets back to 1 when I check again using cat. So I restarted the module sony-laptop with debug flags on. When I try: echo -n 0 | sudo tee -a /sys/devices/platform/sony-laptop/usb_charge these are the curresponding kernel logs, implying that it was a success: [ 9121.879908] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9121.881386] sony_laptop: __call_snc_method: [SN07:0x0107] [ 9121.881394] sony_laptop: called SN07 with 0x0107 (result: 0x) But if I cat the value of usb charge, the change is not reflected, and I see this when I dmesg: [ 9346.202318] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9346.202489] sony_laptop: __call_snc_method: [SN07:0x0007] [ 9346.202494] sony_laptop: called SN07 with 0x0007 (result: 0x0001) If it matters, when i simply echo 1, I will get this: [ 9879.675844] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9879.676878] sony_laptop: __call_snc_method: [SN07:0x00010107] [ 9879.676885] sony_laptop: called SN07 with 0x10107 (result: 0x) The entire debug message when I restart the module(sony-laptop) is given here: http://paste.ubuntu.com/11551226/ . I have asked the same as a question on askubuntu.com. It has got a other information if you need it: http://askubuntu.com/questions/628542/how-to-leave-a-usb-port-powered-during-shutdown-for-charging-mobile --- ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dalton 1816 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=babf655a-816a-4c8a-ad03-6fe550cc1d60 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Sony Corporation SVF14212SNW NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=d52d966a-2fa0-4050-821e-99176a8fc013 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 RelatedPackageVersions: linux-restricted-modules-3.16.0-38-generic N/A linux-backports-modules-3.16.0-38-generic N/A linux-firmware 1.127.12 Tags: trusty Uname: Linux 3.16.0-38-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/18/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0220DA dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0220DA:bd11/18/2013:svnSonyCorporation:pnSVF14212SNW:pvrC10JZ3LZ:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVF14212SNW dmi.product.version: C10JZ3LZ dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461986/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462767] Re: usb 3 driver hangs when suspend
Markus Mitsch, thank you for reporting this and helping make Ubuntu better. Could you please test the latest upstream kernel available from the very top line at the top of the page (the release names are irrelevant for testing, and please do not test the daily folder) following https://wiki.ubuntu.com/Kernel/MainlineBuilds ? It will allow additional upstream developers to examine the issue. If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the report description: kernel-fixed-upstream kernel-fixed-upstream-X.Y-rcZ Where XY and Z are numbers corresponding to the kernel version. If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-X.Y-rcZ Please note, an error to install the kernel does not fit the criteria of kernel-bug-exists-upstream. Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags added: latest-bios-2101 ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462767 Title: usb 3 driver hangs when suspend Status in linux package in Ubuntu: Incomplete Bug description: hallo. when i go to suspend to ram sometimes usb ports(only front, cause it is a seperate pci-e card) loose functionality and dmesg shows: xhci_hcd :06:00.0: Host took too long to start, waited 16000 microseconds. xhci_hcd :06:00.0: PCI post-resume error -19! xhci_hcd :06:00.0: HC died; cleaning up xhci_hcd :06:00.0: HC died; cleaning up pm_run_callback(): pci_pm_resume+0x0/0xc0 returns -19 PM: Device :06:00.0 failed to resume async: error -19 when i suspend to ram the first time the usb disk attached to the usb doesnt work properly but it is only because it changes name from /dev/sdc to /dev/sdd. mfg markus ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-18-generic 3.19.0-18.18 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: markus 1517 F pulseaudio /dev/snd/controlC0: markus 1517 F pulseaudio /dev/snd/controlC1: markus 1517 F pulseaudio CurrentDesktop: KDE Date: Sun Jun 7 17:29:56 2015 HibernationDevice: RESUME=UUID=92c16179-f854-4da9-9640-95ee1fbf385d InstallationDate: Installed on 2015-06-02 (5 days ago) InstallationMedia: Kubuntu 15.04 Vivid Vervet - Release amd64 (20150422) IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=e0fecf85-fcfb-4c70-bb96-a93d5132441f ro quiet splash video=HDMI-A-1:d RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 RfKill: SourcePackage: linux UdevLog: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/03/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2101 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P7P55D LE dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2101:bd10/03/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7P55DLE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System
[Kernel-packages] [Bug 1462919] Re: kswapd pulls server down every 2 weeks.
Thank you for taking the time to file a bug report on this issue. However, given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We have noted that there is a newer version of the development kernel than the one you last tested when this issue was found. Please test again with the newer kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. If you want this bot to quit automatically requesting kernel tests, add a tag named: bot-stop-nagging. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete ** Tags added: kernel-request-3.19.0-15.15 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462919 Title: kswapd pulls server down every 2 weeks. Status in linux package in Ubuntu: Incomplete Bug description: in 15.04 even when having plenty of RAM and swap kswpd uses lots of CPU and might bring the machine down to a crawl making is unable to access it over the network. I say might, because it's only a very clear feeling that I have. I do not know it for sure. Anyway the fact is that I have two server that once every 2 week ends up totally unaccessible from the network. They can be pinged though. Logging in locally takes a long time. Rebooting them locally takes a long time. They have absolutely no noticeable disk IO when in this stalled state. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 jun 8 09:57 seq crw-rw 1 root audio 116, 33 jun 8 09:57 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Mon Jun 8 10:02:44 2015 HibernationDevice: RESUME=UUID=17183f57-6587-47f2-84dc-553f7e5cf3a8 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. MachineType: Intel Corporation S5520UR PciMultimedia: ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=/dev/mapper/vg0-root ro nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M RelatedPackageVersions: linux-restricted-modules-3.19.0-18-generic N/A linux-backports-modules-3.19.0-18-generic N/A linux-firmware 1.143.1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to vivid on 2015-05-16 (22 days ago) dmi.bios.date: 12/17/2009 dmi.bios.vendor: Intel Corp. dmi.bios.version: S5500.86B.01.00.0046.121720091524 dmi.board.asset.tag: dmi.board.name: S5520UR dmi.board.vendor: Intel Corporation dmi.board.version: E22554-606 dmi.chassis.asset.tag: dmi.chassis.type: 23 dmi.chassis.vendor: ... dmi.chassis.version: .. dmi.modalias: dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0046.121720091524:bd12/17/2009:svnIntelCorporation:pnS5520UR:pvr:rvnIntelCorporation:rnS5520UR:rvrE22554-606:cvn...:ct23:cvr..: dmi.product.name: S5520UR dmi.product.version: dmi.sys.vendor: Intel Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462919/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458663] Re: Characters disappear and graphic major problems
Hi, I just made a successfull installation of kernel 4.1.0-040100rc2.201505032335 I'm taking some time, just to be sure to try a complete test, and I'll update with the results. N. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1458663 Title: Characters disappear and graphic major problems Status in linux package in Ubuntu: Incomplete Bug description: After some minuter working, the characters on screen start to disappear or to be bad rendered. Also other glitches appear on screen. Only solution is to reboot. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Mon May 25 21:49:34 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: vboxhost, 4.3.28, 3.19.0-16-generic, x86_64: installed vboxhost, 4.3.28, 3.19.0-18-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:0612] InstallationDate: Installed on 2015-05-13 (11 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) Lsusb: Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0402:7675 ALi Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer TravelMate 5744 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=a47868a6-c53a-4f67-b654-d6f1056a0cc5 ro quiet splash vt.handoff=7 SourcePackage: xorg UdevLog: Error: [Errno 2] File o directory non esistente: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/27/2011 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.04 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: BA52_CP dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.04:bd07/27/2011:svnAcer:pnTravelMate5744:pvrV1.04:rvnAcer:rnBA52_CP:rvrType2-BoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: TravelMate 5744 dmi.product.version: V1.04 dmi.sys.vendor: Acer version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Mon May 25 21:42:49 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1458663/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1461986] Re: can't change usb_charge attribute in /sys/devices/platform/sony-laptop
Black, are you able to charge when shutdown if you are using Windows? ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1461986 Title: can't change usb_charge attribute in /sys/devices/platform/sony-laptop Status in linux package in Ubuntu: Incomplete Bug description: I am on a Sony VAIO svf43142sn. My laptop has the ability to leave a USB port powered on even after shutdown to charge other devices. The value of /sys/devices/platform/sony-laptop/usb_charge is 1, but the USB port is not powered on. Also when I tried toggling it to 0 it resets back to 1 when I check again using cat. So I restarted the module sony-laptop with debug flags on. When I try: echo -n 0 | sudo tee -a /sys/devices/platform/sony-laptop/usb_charge these are the curresponding kernel logs, implying that it was a success: [ 9121.879908] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9121.881386] sony_laptop: __call_snc_method: [SN07:0x0107] [ 9121.881394] sony_laptop: called SN07 with 0x0107 (result: 0x) But if I cat the value of usb charge, the change is not reflected, and I see this when I dmesg: [ 9346.202318] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9346.202489] sony_laptop: __call_snc_method: [SN07:0x0007] [ 9346.202494] sony_laptop: called SN07 with 0x0007 (result: 0x0001) If it matters, when i simply echo 1, I will get this: [ 9879.675844] sony_laptop: found handle 0x0155 (offset: 0x07) [ 9879.676878] sony_laptop: __call_snc_method: [SN07:0x00010107] [ 9879.676885] sony_laptop: called SN07 with 0x10107 (result: 0x) The entire debug message when I restart the module(sony-laptop) is given here: http://paste.ubuntu.com/11551226/ . I have asked the same as a question on askubuntu.com. It has got a other information if you need it: http://askubuntu.com/questions/628542/how-to-leave-a-usb-port-powered-during-shutdown-for-charging-mobile --- ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dalton 1816 F pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=babf655a-816a-4c8a-ad03-6fe550cc1d60 InstallationDate: Installed on 2015-05-28 (7 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Sony Corporation SVF14212SNW NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=d52d966a-2fa0-4050-821e-99176a8fc013 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10 RelatedPackageVersions: linux-restricted-modules-3.16.0-38-generic N/A linux-backports-modules-3.16.0-38-generic N/A linux-firmware 1.127.12 Tags: trusty Uname: Linux 3.16.0-38-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dialout dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/18/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: R0220DA dmi.board.asset.tag: N/A dmi.board.name: VAIO dmi.board.vendor: Sony Corporation dmi.board.version: N/A dmi.chassis.asset.tag: N/A dmi.chassis.type: 10 dmi.chassis.vendor: Sony Corporation dmi.chassis.version: N/A dmi.modalias: dmi:bvnInsydeCorp.:bvrR0220DA:bd11/18/2013:svnSonyCorporation:pnSVF14212SNW:pvrC10JZ3LZ:rvnSonyCorporation:rnVAIO:rvrN/A:cvnSonyCorporation:ct10:cvrN/A: dmi.product.name: SVF14212SNW dmi.product.version: C10JZ3LZ dmi.sys.vendor: Sony Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461986/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458977] Re: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker
** Description changed: This bug is for tracking the 3.16.0-39.53~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 19:00 UTC kernel-stable-master-bug:1458778 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:01 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC + kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1458977 Title: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-utopic package in Ubuntu: Invalid Status in linux-lts-utopic source package in Trusty: New Bug description: This bug is for tracking the 3.16.0-39.53~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 19:00 UTC kernel-stable-master-bug:1458778 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:01 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458977/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1457863] Re: interface eth0 disappears after network cable unplug/re-plug
The bug is not reproducible anymore, although no linux-* package was upgraded, and nothing kernel-related was changed on my machine. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1457863 Title: interface eth0 disappears after network cable unplug/re-plug Status in linux package in Ubuntu: Triaged Bug description: The following bug is reproducible with linux-image-3.13.0-53-generic, but not with linux-image-3.13.0-52-generic. When I unplug the Ethernet cable from my laptop, I get the following messages in /var/log/kern.log after a few seconds (~20s): May 22 13:59:36 host kernel: [ 5498.465626] pciehp :00:1c.5:pcie04: Card not present on Slot(5) May 22 13:59:36 host kernel: [ 5498.478755] pciehp :00:1c.5:pcie04: Card present on Slot(5) May 22 13:59:36 host kernel: [ 5498.598744] pciehp :00:1c.5:pcie04: Device :06:00.0 already exists at :06:00, cannot hot-add May 22 13:59:36 host kernel: [ 5498.598755] pciehp :00:1c.5:pcie04: Cannot add device at :06:00 May 22 13:59:36 host kernel: [ 5498.718646] atl1c :06:00.0: MAC state machine can't be idle since disabled for 10ms second Then, when I re-plug the cable, eth0 does not appear in network manager; there is no message in kern.log. eth0 does not appear in ifconfig -a $ ifconfig -a loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:11586 errors:0 dropped:0 overruns:0 frame:0 TX packets:11586 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16392353 (16.3 MB) TX bytes:16392353 (16.3 MB) wlan0 Link encap:Ethernet HWaddr 48:5d:xx:xx:xx:xx inet addr:192.168.xx.xx Bcast:192.168.xx.xx Mask:255.255.255.0 inet6 addr: fe80:::::/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19 errors:0 dropped:0 overruns:0 frame:0 TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2651 (2.6 KB) TX bytes:12364 (12.3 KB) I tried to reinitialize networking with the following: sudo modprobe -r atl1c sudo modprobe atl1c Still no eth0 and no message in kern.log I tried $ sudo ifup eth0 Ignoring unknown interface eth0=eth0. Same symptoms occur when I reboot my router, and its Ethernet interface becomes temporarily unavailable. Only way I found to restore eth0 was rebooting. --- ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: chewy 3002 F pulseaudio /dev/snd/controlC0: chewy 3002 F pulseaudio CurrentDesktop: KDE DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=17ba1751-f706-417b-ac40-1b4a7be825d8 InstallationDate: Installed on 2012-12-29 (873 days ago) InstallationMedia: Kubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120423) MachineType: ASUSTeK Computer Inc. N53Jq NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-53-generic root=UUID=d48490d1-ca6a-448d-82e6-6397021cd403 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-53.89-generic 3.13.11-ckt19 RelatedPackageVersions: linux-restricted-modules-3.13.0-53-generic N/A linux-backports-modules-3.13.0-53-generic N/A linux-firmware 1.127.12 Tags: trusty Uname: Linux 3.13.0-53-generic x86_64 UpgradeStatus: Upgraded to trusty on 2014-09-05 (259 days ago) UserGroups: adm admin cdrom dialout disk fuse lpadmin mediatomb plugdev sambashare vboxusers wireshark _MarkForUpload: True dmi.bios.date: 01/25/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N53Jq.211 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N53Jq dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias:
[Kernel-packages] [Bug 1446724] Re: server is stable under older kernel (3.2.0-29.46), but crashes under newer kernels
Well, I have tested the release-versions of the kernels. I don't think I am capable of bisecting the git commits from scratch. I can be a tester though. Can you, or someone, build the kernels from git commits so that I can test them? ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1446724 Title: server is stable under older kernel (3.2.0-29.46), but crashes under newer kernels Status in linux package in Ubuntu: Confirmed Bug description: My PC is stable running Ubuntu Server 12.04.5 LTS using the old kernel 3.2.0-29.46. But it crashes whenever I tried to update the kernel to 3.2.0-65.99 or higher (including 14.04.2 LTS). So somewhere between 3.2.0-29.46 and 3.2.0-65.99, changes to the kernel caused my PC to crash (note: I have not tried kernels older than 3.2.0-65.99, so I don't know the exact version that started to cause the crash). I think this is likely a hardware compatibility issue since I could not find any system logs regarding the crashes. My PC is very old (Compaq Evo D510 SFF/07E4h, BIOS 68602 v2.14 08/15/2002), so I am not sure if this bug is worth troubleshooting. In the meantime, I am happy with the performance of my PC running 3.2.0-29.46. But if anyone is interested in troubleshooting this bug, please let me know. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.13.0-32-generic. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3262 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981A at irq 17' Mixer name : 'Analog Devices AD1981A' Components : 'AC97a:41445372' Controls : 26 Simple ctrls : 17 CasperVersion: 1.315.1 DistroRelease: Ubuntu 12.04 IwConfig: lono wireless extensions. eth0 no wireless extensions. LiveMediaBuild: Ubuntu 12.04.5 LTS Precise Pangolin - Release i386 (20140807.1) Lsusb: Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Compaq Evo D510 SFF MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz ProcVersionSignature: Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4 RelatedPackageVersions: linux-restricted-modules-3.13.0-32-generic N/A linux-backports-modules-3.13.0-32-generic N/A linux-firmware 1.79.16 RfKill: Tags: precise running-unity Uname: Linux 3.13.0-32-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/15/2002 dmi.bios.vendor: Compaq dmi.bios.version: 686O2 v2.14 dmi.board.name: 07E4h dmi.board.vendor: Compaq dmi.chassis.type: 15 dmi.chassis.vendor: Compaq dmi.modalias: dmi:bvnCompaq:bvr686O2v2.14:bd08/15/2002:svnCompaq:pnEvoD510SFF:pvr:rvnCompaq:rn07E4h:rvr:cvnCompaq:ct15:cvr: dmi.product.name: Evo D510 SFF dmi.sys.vendor: Compaq To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1446724/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1371591] Re: file not initialized to 0s under some conditions
** Changed in: linux (Ubuntu) Assignee: Chris J Arges (arges) = (unassigned) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1371591 Title: file not initialized to 0s under some conditions Status in linux package in Ubuntu: In Progress Status in linux-lts-trusty package in Ubuntu: Confirmed Status in linux source package in Precise: Invalid Status in linux-lts-trusty source package in Precise: Fix Committed Status in linux source package in Trusty: Fix Committed Status in linux-lts-trusty source package in Trusty: Invalid Status in linux source package in Utopic: Fix Committed Status in linux-lts-trusty source package in Utopic: Invalid Bug description: SRU Justification: [Impact] Under some conditions, after fallocate() the file is observed not to be completely initilized to 0s: some 4KB pages have left-over data from previous files that occupied those pages. Note that in addition to causing functional problems for applications expecting files to be initialized to 0s, this is a security issue because it allows data to leak from one file to another, bypassing file access controls. The problem has been seen running under the following VMWare-based virtual environments: Fusion 6.0.2 ESXi 5.1.0 And under the following versions of Ubuntu: Ubuntu 12.04, 3.11.0-26-generic Ubuntu 14.04.1, 3.13.0-32-generic Ubuntu 14.04.1, 3.13.0-35-generic But did not reproduce under the following version: Ubuntu 10.04, 2.6.32-38-server The problem reproduced under LVM, but did not reproduce without LVM. [Test Case] I reproduced the problem as follows under VMWare Fusion: set up custom VM with default disk size (20 GB) and memory size (1 GB) attach Ubuntu 14.04.1 ISO to CDROM, set it as boot device, boot up select all defaults during installation _including_ LVM install gcc unpack the attached repro.tgz run repro.sh what it does: * fills the disk with a file containing bytes of 0xcc then deletes it * repeatedly runs the repro program which creates two files and accesses them in a certain pattern * checks the file f0 with hexdump; it should contain all 0s, but if pages 0x1000-0x7000 contain 0xcc you have reproduced the problem If the problem does not appear to reproduce, please try waiting a bit and checking the f0 files with hexdump again. This behavior was observed by a customer reproducing the problem under ESXi. I since added an sync after the running the repro binary which I think will fix that. If you still can't reproduce the problem please let me know if there's anything I can do to help. For example can we trace the disk accesses at the SCSI level to verify whether the appropriate SCSI commands are being sent? This may help determine whether the problem is in Linux or in VMWare. [Fix] mptfusion: enable no_write_same in scsi_host_template commit 4089b71cc820a426d601283c92fcd4ffeb5139c2 upstream https://lkml.org/lkml/2014/9/25/482 (Note this patch may be reverted in the future as there is active discussion upstream about a more generic fix) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1371591/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1461688] Comment bridged from LTC Bugzilla
--- Comment From helle...@us.ibm.com 2015-06-08 14:06 EDT--- *** Bug 125869 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1461688 Title: Ubuntu 14.04.2 daily build fails to install Status in linux package in Ubuntu: Triaged Bug description: == Comment: #0 - Murilo Fossa Vicentini mu...@br.ibm.com - 2015-06-03 14:01:29 == Ubuntu 14.04.2 daily build (tested with June 3rd release) fails to install in a PowerVM LPAR of a P8 system. This issue seems to be a regression since I don't see it in the Ubuntu 14.04.2 GA release. The installation method use was a VIOS Virtual DVD loaded with the Ubuntu 14.04.2 ISO from June 3rd. I'll attach below the error that shows up in the middle of the installation, it doesn't seem to be related to any particular activity being performed by the user during the installation, it just randomly happens after some time. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461688/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1452620] Re: beaglebone: kernel BUG on boot
** Tags removed: verification-needed-trusty ** Tags added: verification-done-trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1452620 Title: beaglebone: kernel BUG on boot Status in linux package in Ubuntu: Invalid Status in linux source package in Trusty: Fix Committed Bug description: SRU Justification: Impact: Crash upon boot. Fix: Apply the patch, recompile and reboot. Testcase: Try booting the board several times in a row with and without a patched kernel. --- Booting a trusty kernel on a beaglebone, you often ends up with: ... [9.758659] libphy: PHY 4a101000.mdio:01 not found [9.763789] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 10.211356] [ cut here ] [ 10.216201] kernel BUG at /build/buildd/linux-3.13.0/kernel/timer.c:1084! [ 10.223280] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 10.228637] Modules linked in: tda998x tilcdc drm_kms_helper omap_sham drm omap_aes omap_rng tps65217 uio_pdrv_genirq uio leds_gpio nls1 [ 10.242317] CPU: 0 PID: 302 Comm: systemd-udevd Not tainted 3.13.0-52-generic #86-Ubuntu [ 10.250758] task: db1085c0 ti: db35c000 task.ti: db35c000 [ 10.256398] PC is at cascade+0x98/0x9c [ 10.260305] LR is at cascade+0x80/0x9c [ 10.264212] pc : [c0060ab4]lr : [c0060a9c]psr: 80030193 [ 10.264212] sp : db35dd18 ip : fffee500 fp : 00a9 [ 10.276182] r10: c0a78080 r9 : db35c000 r8 : db35dd58 [ 10.281627] r7 : 0025 r6 : db35dd18 r5 : c0b48a80 r4 : c0b493f4 [ 10.288432] r3 : db22b0a8 r2 : 002c r1 : de217230 r0 : c0b493f4 [ 10.295239] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 10.302770] Control: 10c5387d Table: 9b398019 DAC: 0015 [ 10.308760] Process systemd-udevd (pid: 302, stack limit = 0xdb35c238) [ 10.315565] Stack: (0xdb35dd18 to 0xdb35e000) [ 10.320107] dd00: db22b0a8 c0acd78c [ 10.328637] dd20: c0a713b0 c0b48a80 0004 c0a78088 c0060ce4 c0a713b8 c1024458 [ 10.337167] dd40: c1024490 00200200 c0b32c30 c0a780c0 c0b49294 c0b49494 6071f4b5 0002 [ 10.345697] dd60: 6071f4b5 0001 0101 0004 c0a78088 c0a78084 db35c000 c0a78080 [ 10.354226] dd80: 00a9 c0058bf8 0001 00015200 0100 0004 c0a71540 c0b32ba4 [ 10.362756] dda0: 000a c0b48840 c0a780c0 fffee501 db35c008 c0ac0360 00400140 [ 10.371285] ddc0: db1085c0 db35c028 0054 0054 01b8216c db1085c0 db1f08f8 [ 10.379816] dde0: 00a9 c005917c c0a73030 c0010420 fa20 c0b477ac db35de18 c00093f4 [ 10.388346] de00: c00975d4 c00975d4 60030113 db35de4c c06baac0 db1f08fc 00030113 [ 10.396877] de20: db1f0900 02ef db1f08f8 db1f08fc 0001 0817 01b8216c db1085c0 [ 10.405407] de40: db1f08f8 00a9 db35de60 c00975d4 c00975d4 60030113 [ 10.413938] de60: db35dfb0 db35c030 db1f08c0 c06bc098 0001 c0160cd4 db320d80 db35dee8 [ 10.422468] de80: 0001 db320e90 0800 0561 0001 [ 10.430997] dea0: 0561 007f db35df08 db35df00 00080001 0001 db245010 [ 10.439526] dec0: 0561 01b81be1 c0194868 db35dfb0 [ 10.448054] dee0: 0817 01b8216c 01b8216c db35dfb0 00020420 0581 00b1 c06bc410 [ 10.456583] df00: 0817 c06bc3ac c0a84b98 c00091d4 0400 ddc3f090 c015effc [ 10.465111] df20: 0400 0400 2000 [ 10.473639] df40: c0194974 db320e48 0400 [ 10.482167] df60: be826bf8 be826bf8 0008 c015f14c c015faac [ 10.490695] df80: 2000 01b76468 b6dbd3c6 20030030 [ 10.499223] dfa0: 0589 0588 c06bac38 0589 0001fe99 01b82168 [ 10.507753] dfc0: 01b81be8 b6e4b4e8 01b81be0 0589 0588 00020420 0581 00b1 [ 10.516281] dfe0: 0598 be826b68 b6dbf011 b6dbd3c6 20030030 [ 10.524829] [c0060ab4] (cascade+0x98/0x9c) from [c0060ce4] (run_timer_softirq+0x22c/0x2b4) [ 10.533821] [c0060ce4] (run_timer_softirq+0x22c/0x2b4) from [c0058bf8] (__do_softirq+0x144/0x340) [ 10.543442] [c0058bf8] (__do_softirq+0x144/0x340) from [c005917c] (irq_exit+0xd8/0x120) [ 10.552162] [c005917c] (irq_exit+0xd8/0x120) from [c0010420] (handle_IRQ+0x44/0x90) [ 10.560515] [c0010420] (handle_IRQ+0x44/0x90) from [c00093f4] (omap3_intc_handle_irq+0x8c/0x9c) [ 10.569959] [c00093f4] (omap3_intc_handle_irq+0x8c/0x9c) from [c06baac0] (__irq_svc+0x40/0x54) [ 10.579300] Exception stack(0xdb35de18 to 0xdb35de60) [ 10.584564]
[Kernel-packages] [Bug 1458778] Re: linux: 3.16.0-39.53 -proposed tracker
Hardware Certification have completed testing this -proposed kernel. No regressions were observed and results are available here: http://people.canonical.com/~hwcert/sru-testing/utopic/3.16.0-39.53 /utopic-proposed.html ** Tags added: certification-testing-passed ** Changed in: kernel-sru-workflow/certification-testing Status: In Progress = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1458778 Title: linux: 3.16.0-39.53 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux package in Ubuntu: Invalid Status in linux source package in Utopic: New Bug description: This bug is for tracking the 3.16.0-39.53 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 08:17 UTC kernel-stable-Prepare-package-end:Tuesday, 26. May 2015 19:02 UTC kernel-stable-Promote-to-proposed-start:Tuesday, 26. May 2015 19:02 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:00 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:00 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Regression-testing-end:Friday, 05. June 2015 17:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458778/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458977] Re: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker
Hardware Certification have completed testing this -proposed kernel. No regressions were observed and results are available here: http://people.canonical.com/~hwcert/sru- testing/trusty/3.16.0-39.53~14.04.1/trusty-3.16-proposed.html ** Tags added: certification-testing-passed ** Changed in: kernel-sru-workflow/certification-testing Status: In Progress = Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-utopic in Ubuntu. https://bugs.launchpad.net/bugs/1458977 Title: linux-lts-utopic: 3.16.0-39.53~14.04.1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-utopic package in Ubuntu: Invalid Status in linux-lts-utopic source package in Trusty: New Bug description: This bug is for tracking the 3.16.0-39.53~14.04.1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 19:00 UTC kernel-stable-master-bug:1458778 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 19:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:01 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:01 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:01 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458977/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458618] Re: linux: 3.13.0-54.91 -proposed tracker
** Description changed: This bug is for tracking the 3.13.0-54.91 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Monday, 25. May 2015 16:17 UTC kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 02:03 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 02:03 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:28 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:28 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Regression-testing-end:Friday, 05. June 2015 17:00 UTC + kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1458618 Title: linux: 3.13.0-54.91 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux package in Ubuntu: Invalid Status in linux source package in Trusty: Confirmed Bug description: This bug is for tracking the 3.13.0-54.91 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Monday, 25. May 2015 16:17 UTC kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 02:03 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 02:03 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:28 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:28 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:28 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Regression-testing-end:Friday, 05. June 2015 17:00 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458618/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1458839] Re: Poor Wi-Fi connectivity when connecting USB dock
** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed ** Tags added: kernel-bug-exists-upstream-4.1-rc6 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1458839 Title: Poor Wi-Fi connectivity when connecting USB dock Status in linux package in Ubuntu: Confirmed Bug description: Reproduce: Insert USB dock (Kensington with usb sound card, ethernet card) cable into any USB port What happens: Wi-Fi connectivity worsens and eventually disconnects. Pinging an online target gives me [1432638474.615293] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=11 ttl=54 time=1172 ms [1432638474.636669] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=12 ttl=54 time=185 ms [1432638475.496000] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=13 ttl=54 time=44.3 ms [1432638477.638814] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=14 ttl=54 time=1185 ms [1432638477.644744] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=15 ttl=54 time=192 ms [1432638478.498248] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=16 ttl=54 time=44.4 ms [1432638479.662460] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=17 ttl=54 time=207 ms [1432638480.547434] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=18 ttl=54 time=90.9 ms [1432638482.597835] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=19 ttl=54 time=1140 ms [1432638482.601590] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=20 ttl=54 time=144 ms [1432638484.648946] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=21 ttl=54 time=1191 ms [1432638484.649794] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=22 ttl=54 time=193 ms [1432638485.502967] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=23 ttl=54 time=45.1 ms [1432638487.301295] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=24 ttl=54 time=842 ms [1432638488.649794] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=25 ttl=54 time=1191 ms [1432638488.662959] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=26 ttl=54 time=196 ms [1432638489.514683] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=27 ttl=54 time=46.7 ms [1432638491.653511] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=28 ttl=54 time=1183 ms [1432638491.655011] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=29 ttl=54 time=176 ms [1432638493.659119] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=30 ttl=54 time=1179 ms [1432638493.664250] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=31 ttl=54 time=177 ms [1432638494.534200] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=32 ttl=54 time=45.9 ms … Disconnecting the USB cable restores the connectivity: [1432638514.584374] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=52 ttl=54 time=48.5 ms [1432638515.577822] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=53 ttl=54 time=40.1 ms [1432638516.579000] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=54 ttl=54 time=39.9 ms [1432638517.580760] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=55 ttl=54 time=40.5 ms [1432638518.583465] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=56 ttl=54 time=41.4 ms [1432638519.583923] 64 bytes from fra07s30-in-f5.1e100.net (173.194.112.101): icmp_seq=57 ttl=54 time=40.1 ms … What should have happened: Connectivity should not be affected by a connected USB dock Steps taken to debug: * I've told NetworkManager not to manage the USB network card so that it appears unmanaged. This makes no difference. * I've tried older kernels, e.g. 3.14 with no luck * It does not matter what is connected to the dock ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-18-generic 3.19.0-18.18 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: jonas 1514 F pulseaudio CurrentDesktop: Unity Date: Tue May 26 13:08:44 2015 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=7b9cb658-95dd-4e13-a587-d6d0d59ae7e4 InstallationDate: Installed on 2013-08-27 (637 days ago) InstallationMedia:
[Kernel-packages] [Bug 1458778] Re: linux: 3.16.0-39.53 -proposed tracker
** Description changed: This bug is for tracking the 3.16.0-39.53 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 08:17 UTC kernel-stable-Prepare-package-end:Tuesday, 26. May 2015 19:02 UTC kernel-stable-Promote-to-proposed-start:Tuesday, 26. May 2015 19:02 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:00 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:00 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Regression-testing-end:Friday, 05. June 2015 17:00 UTC + kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1458778 Title: linux: 3.16.0-39.53 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Fix Released Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux package in Ubuntu: Invalid Status in linux source package in Utopic: New Bug description: This bug is for tracking the 3.16.0-39.53 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Tuesday, 26. May 2015 08:17 UTC kernel-stable-Prepare-package-end:Tuesday, 26. May 2015 19:02 UTC kernel-stable-Promote-to-proposed-start:Tuesday, 26. May 2015 19:02 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:00 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:00 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:00 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:00 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:00 UTC kernel-stable-Regression-testing-end:Friday, 05. June 2015 17:00 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:00 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1458778/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1459068] Re: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker
** Description changed: This bug is for tracking the 3.13.0-54.91~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:01 UTC kernel-stable-master-bug:1458618 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:30 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:30 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:01 UTC + kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:01 UTC -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1459068 Title: linux-lts-trusty: 3.13.0-54.91~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow package-testing series: Confirmed Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Confirmed Status in Kernel SRU Workflow security-signoff series: Invalid Status in Kernel SRU Workflow verification-testing series: In Progress Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: New Bug description: This bug is for tracking the 3.13.0-54.91~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:01 UTC kernel-stable-master-bug:1458618 kernel-stable-Prepare-package-end:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-start:Wednesday, 27. May 2015 18:01 UTC kernel-stable-Promote-to-proposed-end:Friday, 29. May 2015 20:12 UTC kernel-stable-phase:Verification Testing kernel-stable-phase-changed:Friday, 29. May 2015 21:30 UTC kernel-stable-Verification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Certification-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-start:Friday, 29. May 2015 21:30 UTC proposed-announcement-sent:True kernel-stable-Regression-testing-start:Friday, 29. May 2015 21:30 UTC kernel-stable-Security-signoff-end:Monday, 01. June 2015 09:01 UTC kernel-stable-Certification-testing-end:Monday, 08. June 2015 12:01 UTC To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459068/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid kernel?
marking confirmed... smb has some access now. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1455372] Re: Trusty arm64 VM doesn't support 'reboot' and 'powerdown'
** Attachment added: dmesg log of 'poweroff' https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1455372/+attachment/4411589/+files/dmesg.log ** Tags removed: verification-needed-trusty ** Tags added: verification-done-trusty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1455372 Title: Trusty arm64 VM doesn't support 'reboot' and 'powerdown' Status in linux package in Ubuntu: Fix Committed Status in linux source package in Trusty: Fix Committed Bug description: Trusty arm64/arm kernel can't support reboot and powerdown function. If user runs 'reboot', then finally the VM hangs in the last step instead of going another booting, and similar problem exists during powerdown. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1455372/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411658/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] nvram.gz
apport information ** Attachment added: nvram.gz https://bugs.launchpad.net/bugs/1462530/+attachment/4411660/+files/nvram.gz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411653/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] ProcPpc64.tar.gz
apport information ** Attachment added: ProcPpc64.tar.gz https://bugs.launchpad.net/bugs/1462530/+attachment/4411657/+files/ProcPpc64.tar.gz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411648/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] JournalErrors.txt
apport information ** Attachment added: JournalErrors.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411651/+files/JournalErrors.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411659/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid and wily kernel?
Additional info: $ sudo multipath -ll mpath2 (1IBM IPR-0 5EC2A9A0) dm-2 IBM,IPR-0 5EC2A900 size=264G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=130 status=active | `- 0:2:2:0 sdc 8:32 active ready running `-+- policy='round-robin 0' prio=10 status=enabled `- 1:2:2:0 sdi 8:128 active ready running mpath1 (1IBM IPR-0 5EC2A960) dm-1 IBM,IPR-0 5EC2A900 size=264G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=130 status=active | `- 0:2:1:0 sdb 8:16 active ready running `-+- policy='round-robin 0' prio=10 status=enabled `- 1:2:1:0 sdh 8:112 active ready running mpath0 (1IBM IPR-0 5EC2A980) dm-0 IBM,IPR-0 5EC2A900 size=264G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=130 status=active | `- 0:2:0:0 sda 8:0 active ready running `-+- policy='round-robin 0' prio=10 status=enabled `- 1:2:0:0 sdg 8:96 active ready running mpath5 (1IBM IPR-0 5EC2A920) dm-5 IBM,IPR-0 5EC2A900 size=264G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=130 status=active | `- 0:2:5:0 sdf 8:80 active ready running `-+- policy='round-robin 0' prio=10 status=enabled `- 1:2:5:0 sdl 8:176 active ready running mpath4 (1IBM IPR-0 5EC2A9C0) dm-4 IBM,IPR-0 5EC2A900 size=264G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=130 status=active | `- 0:2:4:0 sde 8:64 active ready running `-+- policy='round-robin 0' prio=10 status=enabled `- 1:2:4:0 sdk 8:160 active ready running mpath3 (1IBM IPR-0 5EC2A940) dm-3 IBM,IPR-0 5EC2A900 size=264G features='1 queue_if_no_path' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=130 status=active | `- 0:2:3:0 sdd 8:48 active ready running `-+- policy='round-robin 0' prio=10 status=enabled `- 1:2:3:0 sdj 8:144 active ready running After installation via maas , system hung with the boot log attached as 'console boot from wily (boot hangs)'. I then did and ipmi reset and it came up this time. system is currently up in this kernel and Stefan's ssh keys should be able to get in as 'ubuntu' user. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0
[Kernel-packages] [Bug 1462530] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411652/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411650/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411656/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411654/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] ProcMisc.txt
apport information ** Attachment added: ProcMisc.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411655/+files/ProcMisc.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid kernel?
Attaching console log of a wily (3.19.0-20-generic) kernel ** Attachment added: console boot from wily (boot hangs) https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+attachment/4411645/+files/boot.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1371634] Re: block devices appear twice
** Description changed: $ sudo blkid /dev/sr0: LABEL=Ubuntu-Server 14.04 LTS ppc64el TYPE=iso9660 /dev/sda2: UUID=795a6e14-ea4e-4718-9e98-c6df3696920c TYPE=ext4 /dev/sda3: UUID=0a91d81f-6a16-4b96-a92c-11ca8bdc4bf4 TYPE=swap /dev/sdb2: UUID=1d14c1f3-716f-4fb8-9070-d321b39ffcb3 TYPE=ext4 /dev/sdb3: UUID=9c228177-d65c-4d19-a462-db1891e9781e TYPE=swap /dev/sdg2: UUID=795a6e14-ea4e-4718-9e98-c6df3696920c TYPE=ext4 /dev/sdg3: UUID=0a91d81f-6a16-4b96-a92c-11ca8bdc4bf4 TYPE=swap /dev/sdh2: UUID=1d14c1f3-716f-4fb8-9070-d321b39ffcb3 TYPE=ext4 /dev/sdh3: UUID=9c228177-d65c-4d19-a462-db1891e9781e TYPE=swap I'm not sure what exactly those block devices are (as in if they're raided in hardware or they actually represent physical spinning disks). But I do know that writing data to sda causes that data to be readable from sdg. The same is true: sda - sdg sdb - sdh That is what causes those UUIDs to be similar. Everything is functional, you just have to know that if your root device is /dev/sdg that you should probably not write data to /dev/sda thinking you can use it as a disk. Related bugs: - * bug 1432062: multipath-tools-boot: support booting without user_friendly_names on devices with spaces in identifiers - + * bug 1432062: multipath-tools-boot: support booting without user_friendly_names on devices with spaces in identifiers + * bug 1463043 : some SM15K systems fail to boot after deployment - drop into initramfs shell + * bug 1462530 : multipath errors on vivid, wily kernel + * bug 1463046: installation of multipath-tools-boot can break boot ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-3.13.0-35-generic 3.13.0-35.62 ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6 Uname: Linux 3.13.0-35-generic ppc64le AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 2: ls: cannot access /dev/snd/: No such file or directory AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.14.1-0ubuntu3.4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDmesg: [ 88.736220] init: plymouth-upstart-bridge main process ended, respawning Date: Fri Sep 19 14:31:20 2014 HibernationDevice: RESUME=UUID=9c228177-d65c-4d19-a462-db1891e9781e Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ProcEnviron: TERM=screen PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: root=UUID=1d14c1f3-716f-4fb8-9070-d321b39ffcb3 ro console=hvc0 BOOTIF=01-6c-ae-8b-6a-a0-88 quiet RelatedPackageVersions: linux-restricted-modules-3.13.0-35-generic N/A linux-backports-modules-3.13.0-35-generic N/A linux-firmware 1.127.6 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1371634 Title: block devices appear twice Status in curtin package in Ubuntu: Fix Released Status in linux package in Ubuntu: Invalid Status in multipath-tools package in Ubuntu: Confirmed Bug description: $ sudo blkid /dev/sr0: LABEL=Ubuntu-Server 14.04 LTS ppc64el TYPE=iso9660 /dev/sda2: UUID=795a6e14-ea4e-4718-9e98-c6df3696920c TYPE=ext4 /dev/sda3: UUID=0a91d81f-6a16-4b96-a92c-11ca8bdc4bf4 TYPE=swap /dev/sdb2: UUID=1d14c1f3-716f-4fb8-9070-d321b39ffcb3 TYPE=ext4 /dev/sdb3: UUID=9c228177-d65c-4d19-a462-db1891e9781e TYPE=swap /dev/sdg2: UUID=795a6e14-ea4e-4718-9e98-c6df3696920c TYPE=ext4 /dev/sdg3: UUID=0a91d81f-6a16-4b96-a92c-11ca8bdc4bf4 TYPE=swap /dev/sdh2: UUID=1d14c1f3-716f-4fb8-9070-d321b39ffcb3 TYPE=ext4 /dev/sdh3: UUID=9c228177-d65c-4d19-a462-db1891e9781e TYPE=swap I'm not sure what exactly those block devices are (as in if they're raided in hardware or they actually represent physical spinning disks). But I do know that writing data to sda causes that data to be readable from sdg. The same is true: sda - sdg sdb - sdh That is what causes those UUIDs to be similar. Everything is functional, you just have to know that if your root device is /dev/sdg that you should probably not write data to /dev/sda thinking you can use it as a disk. Related bugs: * bug 1432062: multipath-tools-boot: support booting without user_friendly_names on devices with spaces in identifiers * bug 1463043 : some SM15K systems fail to boot after deployment - drop into
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid and wily kernel?
** Summary changed: - multipath errors on vivid kernel? + multipath errors on vivid and wily kernel? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] DeviceTree.tar.gz
apport information ** Attachment added: DeviceTree.tar.gz https://bugs.launchpad.net/bugs/1462530/+attachment/4411649/+files/DeviceTree.tar.gz -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 RelatedPackageVersions: linux-restricted-modules-3.19.0-20-generic N/A linux-backports-modules-3.19.0-20-generic N/A linux-firmware 1.144 RfKill: Error: [Errno 2] No such file or directory Tags: wily uec-images UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 3.19.0-20-generic ppc64le UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True cpu_cores: Number of cores present = 20 cpu_coreson: Number of cores online = 20 cpu_dscr: DSCR is 0 cpu_freq: min: 3.693 GHz (cpu 72) max: 3.695 GHz (cpu 87) avg: 3.694 GHz cpu_runmode: Could not retrieve current diagnostics mode, No firmware implementation of function cpu_smt: SMT=8 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1462530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1462530] Re: multipath errors on vivid and wily kernel?
apport information ** Tags added: apport-collected uec-images wily ** Description changed: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case + --- + AlsaDevices: + total 0 + crw-rw 1 root audio 116, 1 Jun 8 16:05 seq + crw-rw 1 root audio 116, 33 Jun 8 16:05 timer + AplayDevices: Error: [Errno 2] No such file or directory + ApportVersion: 2.17.3-0ubuntu4 + Architecture: ppc64el + ArecordDevices: Error: [Errno 2] No such file or directory + AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: + DistroRelease: Ubuntu 15.10 + Lsusb: + Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Package: linux (not installed) + PciMultimedia: + + ProcEnviron: + TERM=screen + PATH=(custom, no user) + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcFB: + + ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 + ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 + ProcLocks: + 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF + 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF + 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF + 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF + ProcSwaps: + Filename TypeSizeUsedPriority + /swap.img file 8388544 0 -1 + ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 + ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 + RelatedPackageVersions: + linux-restricted-modules-3.19.0-20-generic N/A + linux-backports-modules-3.19.0-20-generic N/A + linux-firmware 1.144 + RfKill: Error: [Errno 2] No such file or directory + Tags: wily uec-images + UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' + Uname: Linux 3.19.0-20-generic ppc64le + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: + + _MarkForUpload: True + cpu_cores: Number of cores present = 20 + cpu_coreson: Number of cores online = 20 + cpu_dscr: DSCR is 0 + cpu_freq: + min: 3.693 GHz (cpu 72) + max: 3.695 GHz (cpu 87) + avg: 3.694 GHz + cpu_runmode: + Could not retrieve current diagnostics mode, + No firmware implementation of function + cpu_smt: SMT=8 ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1462530/+attachment/4411647/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1462530 Title: multipath errors on vivid and wily kernel? Status in linux package in Ubuntu: Confirmed Bug description: Oleg and I got changes into curtin to fix bug 1371634. So that now we can boot into multipath iscsi devices on power. It seems to go well enough with trusty+hwe-u, but when trying vivid, I am seeing errors. Boot was failing in one case --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Jun 8 16:05 seq crw-rw 1 root audio 116, 33 Jun 8 16:05 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.17.3-0ubuntu4 Architecture: ppc64el ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 15.10 Lsusb: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Package: linux (not installed) PciMultimedia: ProcEnviron: TERM=screen PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: root=UUID=962acf9e-cd1c-49b0-9264-801271cd510f ro console=hvc0 ProcLoadAvg: 0.08 0.12 0.10 1/1126 3818 ProcLocks: 1: FLOCK ADVISORY WRITE 2951 00:12:14557 0 EOF 2: POSIX ADVISORY WRITE 2952 00:12:43306 0 EOF 3: POSIX ADVISORY WRITE 2905 00:12:22701 0 EOF 4: POSIX ADVISORY WRITE 2965 00:12:18505 0 EOF ProcSwaps: Filename TypeSizeUsedPriority /swap.img file 8388544 0 -1 ProcVersion: Linux version 3.19.0-20-generic (buildd@fisher03) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #20-Ubuntu SMP Fri May 29 10:03:56 UTC 2015 ProcVersionSignature: Ubuntu
[Kernel-packages] [Bug 1445195] Re: [Hyper-V] Kernel patches for storvsc
@jrp How did your Vivid testing do? Were you able to find any particularities? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1445195 Title: [Hyper-V] Kernel patches for storvsc Status in linux package in Ubuntu: Triaged Status in linux source package in Precise: Triaged Status in linux source package in Trusty: Triaged Status in linux source package in Utopic: Triaged Status in linux source package in Vivid: Triaged Status in linux source package in Wily: Triaged Bug description: Storage driver performance updates for vivid K. Y. Srinivasan (7): scsi: storvsc: Increase the ring buffer size scsi: storvsc: Size the queue depth based on the ringbuffer size scsi: storvsc: Always send on the selected outgoing channel scsi: storvsc: Retrieve information about the capability of the target scsi: storvsc: Fix a bug in copy_from_bounce_buffer() scsi: storvsc: Don't assume that the scatterlist is not chained scsi: storvsc: Set the tablesize based on the information given by the host To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1445195/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp