KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
Depending on how low the low spots are, The best thing to use is a stick slurry of micro and resin. Don't go to thick just fill the low spots. Then use the stuff Mark Jones talked about icing to feather out any small areas Lee Van Dyke > On Aug 14, 2015, at 1:46 PM, peter via KRnet wrote: > > Never use bondo. Sands poorly and cracks due to low cohesive strength. Peter >
KR> Kansas BBQ/Fish Fry Aug 15
Hi im new and out of the know where is this when does it start and who can come Sent from Windows Mail From: Global Solutions via KRnet Sent: ?Friday?, ?August? ?14?, ?2015 ?9?:?16? ?AM To: Global Solutions via KRnet, terry chizek Cc: jon kimmel I might drive up...all this building and I've never even seen a kr in person...might even bring my extra fiberglass parts. https://sites.google.com/site/mykr2stretch/ https://sites.google.com/site/mykr2stretch/parts-for-sale ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
Never use bondo. Sands poorly and cracks due to low cohesive strength. Peter
KR> Filling low spots
Hi Guys, When I was building, Bill Clapp told me about a filling product used in the automotive paint shops called ?Icing?. This is a two part filler. It is absolutely the easiest filler I have ever sanded. It is super lightweight and will feather out on the edges exceptionally well. I used it all over my KR. It goes a long way so if you decide to try it buy the smallest tube which is about 24 ounces. It cost about $25. Try it, you will be glad you did. Mark Jones (N886MJ) Stevens Point, WI E-mail: flykr2s at charter.net Web: www.flykr2s.com
KR> Sanding
For those of you that are sanding, remember I have lots of sandpaper in 50 yd rolls?. 24 36and some 60 grit for getting to the heavy stuff?. give me your needs and will price as before?. jw Joe. E. Wallace jwallacep51 at gmail.com
KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
You should have three ?board all different lengths and you should also have one that bends. Like on a thin piece of plywould or plexiglass for the double contour curves. Paul ViskBelleville Il618-406-4705 Original message From: Chris Prata via KRnet Date: 8/14/2015 11:57 AM (GMT-06:00) To: KRnet Cc: Chris Prata Subject: Re: KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F also, I just watched a documentary on how the guy (custom car builder) made the shuttle craft for the original star trek (its on youtube).? he mentioned using 3ft sanding boards which they custom made (said they can be bought today).? so maybe thats a key, use a very long, reinforced with a vertical, sanding board. > Date: Fri, 14 Aug 2015 12:10:35 -0400 > To: krnet at list.krnet.org > Subject: Re: KR> Filling low spots in cured fiberglass without spending $200 > on a can of EA960F > From: krnet at list.krnet.org > CC: ppaulvsk at aol.com > > Body filler is vary heavy. I personally don't? us the primer. I have no > trouble seeing were to stop sanding. > > Paul ViskBelleville Il618-406-4705 > > Original message From: Chris Prata via KRnet list.krnet.org> Date: 8/14/2015? 10:31 AM? (GMT-06:00) ?? ? ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
also, I just watched a documentary on how the guy (custom car builder) made the shuttle craft for the original star trek (its on youtube). he mentioned using 3ft sanding boards which they custom made (said they can be bought today). so maybe thats a key, use a very long, reinforced with a vertical, sanding board. > Date: Fri, 14 Aug 2015 12:10:35 -0400 > To: krnet at list.krnet.org > Subject: Re: KR> Filling low spots in cured fiberglass without spending $200 > on a can of EA960F > From: krnet at list.krnet.org > CC: ppaulvsk at aol.com > > Body filler is vary heavy. I personally don't us the primer. I have no > trouble seeing were to stop sanding. > > Paul ViskBelleville Il618-406-4705 > > Original message From: Chris Prata via KRnet list.krnet.org> Date: 8/14/2015 10:31 AM (GMT-06:00)
KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
Body filler is vary heavy. I personally don't ?us the primer. I have no trouble seeing were to stop sanding. Paul ViskBelleville Il618-406-4705 Original message From: Chris Prata via KRnet Date: 8/14/2015 10:31 AM (GMT-06:00) To: KRnet Cc: Chris Prata Subject: Re: KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F the article suggests laying on a coat of black primer before filling, to help visualize the topography during sanding. ?
KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
the article suggests laying on a coat of black primer before filling, to help visualize the topography during sanding. west system's benefit is strong bonding to old work. but with primer in between, the only bond you have think is the primer. at that point, may as well just use body filler, no? > Date: Thu, 13 Aug 2015 17:21:16 -0500 > To: krnet at list.krnet.org > Subject: Re: KR> Filling low spots in cured fiberglass without spending $200 > on a can of EA960F > From: krnet at list.krnet.org > CC: ppaulvsk at aol.com > > > > > > > Follow this link to the article. It's the best way to come out with a good > result. I use West systems resin and micro > http://curedcomposites.com/finish.html > > > Paul ViskBelleville Il618-406-4705 > > Original message From: Dave Acklam via KRnet list.krnet.org> Date: 8/13/2015 4:56 PM (GMT-06:00) To: KRnet list.krnet.org> Cc: Dave Acklam Subject: KR> > Filling low spots in cured fiberglass without spending $200 on > a can of EA960F > So, I just re-did my elevator, and I have some small depressions in the > skin > > I've sanded down what I can, but some are too low to sand out > > What do you guys use for filling/fairing compound, for this sort of thing? > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> Kansas BBQ/Fish Fry Aug 15
I might drive up...all this building and I've never even seen a kr in person...might even bring my extra fiberglass parts. https://sites.google.com/site/mykr2stretch/ https://sites.google.com/site/mykr2stretch/parts-for-sale
KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
Like Jeff mentioned, using your epoxy sytem and microspheres will give you the lightest and cheapes filler available. Do not fill the low spots untill you are ready to fill the whole elevator. Do it in one operation if possible. Then you can sing the sanding song while sanding. Roger Baalman rbaalman at cox.net Owasso, OK Jeff Scott via KRnet wrote: > > > > So, I just re-did my elevator, and I have some small depressions in the > > skin > > > > I've sanded down what I can, but some are too low to sand out > > > > What do you guys use for filling/fairing compound, for this sort of thing? > > West Epoxy and microspheres. > > -Jeff Scott > Los Alamos, NM > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> KR engine mount?
> I don't have that but I do have an extra corvair mount in my Hanger which I > will turn loose $cheap$ just to get it outta my way. > > Mike Turner > Edgewood, NM (1n1) Mike, I would be interested in your corvair mount, you can email me personally. Thank you, Steven BedfordKr2s/corvairWoodland Park, COs1bedford at msn.com
KR> Filling low spots in cured fiberglass without spending $200 on a can of EA960F
> > So, I just re-did my elevator, and I have some small depressions in the > skin > > I've sanded down what I can, but some are too low to sand out > > What do you guys use for filling/fairing compound, for this sort of thing? West Epoxy and microspheres. -Jeff Scott Los Alamos, NM
