KR> KR engine mount?
> I don't have that but I do have an extra corvair mount in my Hanger which I > will turn loose $cheap$ just to get it outta my way. > > Mike Turner > Edgewood, NM (1n1) Mike, I would be interested in your corvair mount, you can email me personally. Thank you, Steven BedfordKr2s/corvairWoodland Park, COs1bedford at msn.com
KR> KR engine mount?
I think this will do it. http://s366.photobucket.com/user/flightsimmer_2009/media/Mobile%20Uploads/20150812_110249_zpslwt3lffv.jpg.html mfreeman2--- via KRnet wrote: > Alright I found it its attached to a GP VW type 4 2600 cc engine sitting in > the crate that's why it was so hard to find. I'll try to post a picture of > it. > The dimensions are 13 and three quarter inches by 15 and three quarter inches > center to center of the square pads that mount against the firewall. > It has the Diehl case with full electric. > > mfreeman2--- via KRnet wrote: > > I had one but I need to do a search and see if I still have it. It may take > > a bit of time to dig through my stuff. > > > > > > Mark Langford via KRnet wrote: > > > I received the email below from a guy that is looking for an engine > > > mount for his KR1.5. It sounds like the one on N891JF, which isn't for > > > sale, and doesn't help him. But does anybody have a mount like this for > > > sale? If so, please contact me and I'll forward your contact info to > > > him. Thanks, Mark Langford > > > ___ > > > > > > I'm still in search for a VW mount that is a bolt-up to the four each > > > 4-stud attachment points.The Great Plains mounts shown in their > > > catalogue have single bolt attachment feet, not the quad feet that I > > > need to use the present stud patterns. > > > > > > The upper firewall attachments are 22 1/8" apart , the lowers 23 1/8". > > > Upper to lower spread 13 3/8" (center to center) > > > > > > Do those figures bring anything to mind? Thanks again, Keith > > > __ > > > > > > Mark Langford, Harvest, AL > > > ML "at" N56ML.com > > > www.N56ML.com > > > > > > > > > ___ > > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > > please see other KRnet info at http://www.krnet.org/info.html > > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > > options > > > > ___ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > options > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> KR engine mount?
Alright I found it its attached to a GP VW type 4 2600 cc engine sitting in the crate that's why it was so hard to find. I'll try to post a picture of it. The dimensions are 13 and three quarter inches by 15 and three quarter inches center to center of the square pads that mount against the firewall. It has the Diehl case with full electric. mfreeman2--- via KRnet wrote: > I had one but I need to do a search and see if I still have it. It may take a > bit of time to dig through my stuff. > > > Mark Langford via KRnet wrote: > > I received the email below from a guy that is looking for an engine > > mount for his KR1.5. It sounds like the one on N891JF, which isn't for > > sale, and doesn't help him. But does anybody have a mount like this for > > sale? If so, please contact me and I'll forward your contact info to > > him. Thanks, Mark Langford > > ___ > > > > I'm still in search for a VW mount that is a bolt-up to the four each > > 4-stud attachment points.The Great Plains mounts shown in their > > catalogue have single bolt attachment feet, not the quad feet that I > > need to use the present stud patterns. > > > > The upper firewall attachments are 22 1/8" apart , the lowers 23 1/8". > > Upper to lower spread 13 3/8" (center to center) > > > > Do those figures bring anything to mind? Thanks again, Keith > > __ > > > > Mark Langford, Harvest, AL > > ML "at" N56ML.com > > www.N56ML.com > > > > > > ___ > > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > please see other KRnet info at http://www.krnet.org/info.html > > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > > options > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> KR engine mount?
I'm slow at responding, but I have a engine mount the looks like the one Mark is using hanging in my storage shed. If it could be used I give to Keith for the shipping. It came off my old KR2. Roger Bulla rbulla2 at wic.net -Original Message- From: Bill Masquelier via KRnet Sent: Monday, August 10, 2015 9:23 AM To: KR List Cc: Bill Masquelier Subject: Re: KR> KR engine mount? We have a spare engine mount for a KR2 The engine side fits the stock VW mounts and the firewall side upper mounts are 16" on center,lower are 15 3/4 on center, upper to lower are 13 3/4 on center. Engine side has the tubular mounts with the washer welded in the center. Will sell for $100 plus shipping Bill Masquelier ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> KR engine mount?
It is not the same as a revmaster 2 of the engine holes are closer than the other I am going to the airport to day I will get the dem Sent from AOL Mobile Mail -Original Message- From: Mike Arnold via KRnet To: KRnet Cc: Mike Arnold Sent: Mon, Aug 10, 2015 08:18 AM Subject: Re: KR> KR engine mount? Is the Hapi case the same as a Diehl accessory case. On Aug 9, 2015 7:48 PM, "Randy Moore Newbern Tn. N318RM via KRnet" < mailto:krnet at list.krnet.org">krnet at list.krnet.org> wrote: > I have a KR mount for a HAPI case i can make a copy of it > > > > > Randy Moore > challenger II sold > avid mark IV > KR II converted to single seat for sale 2,000 > Newbern Tn 38059 > > > cell 731589 1330 > > > > > > -Original Message- > From: michael a. TURNER Owner via KRnet <mailto:krnet at list.krnet.org">krnet at list.krnet.org> > To: KRnet <mailto:krnet at list.krnet.org">krnet at > list.krnet.org> > Cc: michael a. TURNER Owner <mailto:aviator42 at centurylink.net">aviator42 at centurylink.net> > Sent: Sun, Aug 9, 2015 12:14 pm > Subject: Re: KR> KR engine mount? > > > I don't have that but I do have an extra corvair mount in my Hanger which > I will > turn loose $cheap$ just to get it outta my way. > > Mike Turner > Edgewood, NM > (1n1) > > > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search; target="_blank">http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to mailto:KRnet-leave at list.krnet.org">KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html; target="_blank">http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org; target="_blank">http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search; target="_blank">http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to mailto:KRnet-leave at list.krnet.org">KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html; target="_blank">http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org; target="_blank">http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> KR engine mount?
We have a spare engine mount for a KR2 The engine side fits the stock VW mounts and the firewall side upper mounts are 16" on center,lower are 15 3/4 on center, upper to lower are 13 3/4 on center. Engine side has the tubular mounts with the washer welded in the center. Will sell for $100 plus shipping Bill Masquelier
KR> KR engine mount?
We have a spare engine mount for a KR2 The engine side fits the stock VW mounts and the firewall side upper mounts are 16" on center,lower are 15 3/4 on center, upper to lower are 13 3/4 on center. Engine side has the tubular mounts with the washer welded in the center. Will sell for $100 plus shipping Bill Masquelier > Date: Mon, 10 Aug 2015 09:24:22 -0400 > To: krnet at list.krnet.org > Subject: Re: KR> KR engine mount? > From: krnet at list.krnet.org > CC: no1son38 at aol.com > > It is not the same as a revmaster 2 of the engine holes are closer than the > other I am going to the airport to day I will get the dem > > Sent from AOL Mobile Mail > > > -Original Message- > From: Mike Arnold via KRnet > To: KRnet > Cc: Mike Arnold > Sent: Mon, Aug 10, 2015 08:18 AM > Subject: Re: KR> KR engine mount? > > > > > > Is the Hapi case the same as a Diehl > accessory case. > On Aug 9, 2015 7:48 PM, > "Randy Moore Newbern Tn. N318RM via KRnet" < > mailto:krnet at list.krnet.org">krnet at list.krnet.org> wrote: > > > > I have a KR mount for a HAPI case i can make a copy of it > > > > > > > > > > Randy > Moore > > challenger II sold > > avid mark IV > > KR II converted to single > seat for sale 2,000 > > Newbern Tn 38059 > > > > > > cell 731589 > 1330 > > > > > > > > > > > > -Original Message- > > From: michael a. TURNER > Owner via KRnet <mailto:krnet at list.krnet.org">krnet at > list.krnet.org> > > To: KRnet <mailto:krnet at list.krnet.org">krnet at > > list.krnet.org> > > > Cc: michael a. TURNER Owner <mailto:aviator42 at > centurylink.net">aviator42 at centurylink.net> > > Sent: Sun, Aug 9, > 2015 12:14 pm > > Subject: Re: KR> KR engine mount? > > > > > > I don't have that > but I do have an extra corvair mount in my Hanger which > > I will > > turn loose > $cheap$ just to get it outta my way. > > > > Mike Turner > > Edgewood, NM > > > (1n1) > > > > > > > > > > ___ > > Search > the KRnet Archives at http://tugantek.com/archmailv2-kr/search; > target="_blank">http://tugantek.com/archmailv2-kr/search. > > To > UNsubscribe from KRnet, send a message to mailto:KRnet-leave at > list.krnet.org">KRnet-leave at list.krnet.org > > please > see other KRnet info at http://www.krnet.org/info.html; > target="_blank">http://www.krnet.org/info.html > > see > http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org; > target="_blank">http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org > to change > > > options > > > ___ > Search the KRnet > Archives at http://tugantek.com/archmailv2-kr/search; > target="_blank">http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from > KRnet, send a message to mailto:KRnet-leave at > list.krnet.org">KRnet-leave at list.krnet.org > please see other KRnet info > at http://www.krnet.org/info.html; > target="_blank">http://www.krnet.org/info.html > see > http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org; > target="_blank">http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org > to change options > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> KR engine mount?
I have a KR mount for a HAPI case i can make a copy of it Randy Moore challenger II sold avid mark IV KR II converted to single seat for sale 2,000 Newbern Tn 38059 cell 731589 1330 -Original Message- From: michael a. TURNER Owner via KRnet To: KRnet Cc: michael a. TURNER Owner Sent: Sun, Aug 9, 2015 12:14 pm Subject: Re: KR> KR engine mount? I don't have that but I do have an extra corvair mount in my Hanger which I will turn loose $cheap$ just to get it outta my way. Mike Turner Edgewood, NM (1n1)
KR> KR engine mount?
I had one but I need to do a search and see if I still have it. It may take a bit of time to dig through my stuff. Mark Langford via KRnet wrote: > I received the email below from a guy that is looking for an engine > mount for his KR1.5. It sounds like the one on N891JF, which isn't for > sale, and doesn't help him. But does anybody have a mount like this for > sale? If so, please contact me and I'll forward your contact info to > him. Thanks, Mark Langford > ___ > > I'm still in search for a VW mount that is a bolt-up to the four each > 4-stud attachment points.The Great Plains mounts shown in their > catalogue have single bolt attachment feet, not the quad feet that I > need to use the present stud patterns. > > The upper firewall attachments are 22 1/8" apart , the lowers 23 1/8". > Upper to lower spread 13 3/8" (center to center) > > Do those figures bring anything to mind? Thanks again, Keith > __ > > Mark Langford, Harvest, AL > ML "at" N56ML.com > www.N56ML.com > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
KR> KR engine mount?
I don't have that but I do have an extra corvair mount in my Hanger which I will turn loose $cheap$ just to get it outta my way. Mike Turner Edgewood, NM (1n1) - Original Message - From: Mark Langford via KRnet Subject: KR> KR engine mount? I received the email below from a guy that is looking for an engine mount for his KR1.5. It sounds like the one on N891JF, which isn't for sale, and doesn't help him. But does anybody have a mount like this for sale? If so, please contact me and I'll forward your contact info to him. Thanks, Mark Langford ___ I'm still in search for a VW mount that is a bolt-up to the four each 4-stud attachment points.The Great Plains mounts __ Mark Langford, Harvest, AL ML "at" N56ML.com www.N56ML.com ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
KR> KR engine mount?
I received the email below from a guy that is looking for an engine mount for his KR1.5. It sounds like the one on N891JF, which isn't for sale, and doesn't help him. But does anybody have a mount like this for sale? If so, please contact me and I'll forward your contact info to him. Thanks, Mark Langford ___ I'm still in search for a VW mount that is a bolt-up to the four each 4-stud attachment points.The Great Plains mounts shown in their catalogue have single bolt attachment feet, not the quad feet that I need to use the present stud patterns. The upper firewall attachments are 22 1/8" apart , the lowers 23 1/8". Upper to lower spread 13 3/8" (center to center) Do those figures bring anything to mind? Thanks again, Keith __ Mark Langford, Harvest, AL ML "at" N56ML.com www.N56ML.com
KR>KR engine mount, stick on sale at Wicks
I received an order today from Wicks, and in it was a sale flyer that mentioned an engine mount for $90 (KR200-046v), and a KR stick KR200-069 for $40. They are at 618-654-7447. Mention the February clearance "sale-c", and ask for Don. Mark Langford, Huntsville, AL N56ML "at" hiwaay.net see KR2S project at http://home.hiwaay.net/~langford