Re: mill for sale
Nice find Bill for the price it looks, very nice.The 1000ex is the base unit that I own. With a turn table and the mill$850.00 is a pretty good deal.It should be noted, that the 1000ex has a MT2 tailstock, so it can take a number of different lathe tail piece. (something the newer machine can not do.) It also has the plastic bushings in the headstock, (the newer machines had ball bearings.) not a big deal that is unless you plan to turn Large turnings and or put a high speed motor on the headstock. C.A.G. On Sunday, December 13, 2020, 08:05:15 PM EST, bulke...@mmnet.com.au wrote: https://www.ebay.com/itm/Legacy-1000EX-Ornamental-Mill/184561879150?hash=item2af8bec86e:g:u6wAAOSwcJhfxp5h there is a mill on ebay $850 don’t know if you all have seen it I cant see any extras accept a rotary table. Bill | | Virus-free. www.avast.com | -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/01d6d1b5%2428fa5af0%247aef10d0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2133053219.235500.1607917209347%40mail.yahoo.com.
RE: mill for sale
Home made liner milling table maybe Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of MWF Sent: Monday, 9 September 2019 1:40 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: mill for sale Curt (and all), I think I said this in an earlier comment on this Mill: I would not be surprised if the owner of this Mill started to put it together and never got around to finishing the task. I say this for a couple reasons. It looks too "pristine" - no Mill I have seen posted for sale has looked this "new". The photos reflect that it was either: 1. Not completely put together - which is why we don't see the X-Axis rod and its associated pieces on it, the Follower Nut for the Y-Axis Carriage, and the "gear train" installed. Even the "Dust Collection" pieces are squeeky clean and some still in their wrappers. or 2. They put it together; used it; then took it apart and did an EXCEPTIONALLY GOOD job of cleaning it up for the photographs. (Doesn't pass a "common sense test".) What do the rest of ya'll think? Here is a question I asked earlier - and no one has addressed it. Anyone have a guess or know what they are for? "Go to the next to the last photo - the one with the 2 good sized pieces of MDF with bolts & wingnuts in them. Any idea what those two MDF pieces are for? My guess is they were to be put horizontally between the two lower frame extrusions - serving as a work surface for milling flat work pieces." Thanks. Mac _ _ -Original Message- From: 'Curt George' via Legacy Ornamental Mills Sent: Sep 8, 2019 12:50 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: Re: mill for sale OK Mac. I did not see that. I was hoping it was there? after-all nothing would work without it... ;-) Now we need to look for the Acme nut for the carriage. ;-p As I said earlier,From the posting, the man says he had to cut photo's out to make room in the E-bay posting. In Good faith, this looks to be a nice machine. Have a good night. C.A.G. _ On Sunday, September 8, 2019, 12:35:47 AM EDT, MWF mailto:mwfos...@earthlink.net> > wrote: Curtis, Then look over on the far left side, running parallel with the left edge of the MDF panels. See the long Acme threaded X-Axis rod? The Acme rod (Y-Axis) I referenced earlier (in a different thread about this Mill) as being rusty is rustier that this X-Axis rod. Any idea what these two MDF pieces are for? My guess is they were to be put horizontally between the two lower frame extrusions - serving as a work surface for milling flat work pieces. Mac _ _ -Original Message- From: 'Curt George' via Legacy Ornamental Mills Sent: Sep 7, 2019 3:56 PM To: Legacy Ornamental Mills Subject: Re: mill for sale Hey guys one more NOTE. On closer look, I do not see a acme screw in the photos. I hope this is just a mistake? the owner stated like new, and limit on photos. perhaps it is just not on the unit when the photo was taken? (photo #3.) C.A.G. _ _ On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George mailto:curt.geo...@yahoo.com> > wrote: Thanks Bill I missed this one. Not a bad price if it stays where it is at? some good points are this is an older 1000ex. it has a #2MT. on both the head and tail-stock, so it can take lathe adapters, like a drive spur and or live center I find this useful, On my Legacy. C.A.G. _ _ On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> mailto:bulke...@mmnet.com.au> > wrote: Has every one seen this one for sale https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1939491361.1340.1567957228228%40wamui-berry.atl.sa.earthlink.net <https://groups.google.com/d/msgid/legacy-ornamental-mills/1939491361.1340.1567957228228%40wamui-berry.atl.sa.earthlink.net?utm_medium=email_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from
Re: mill for sale
Good morning Mac.
You could be right, about this mill not being put into use before. (I will
also point out that there are plastic sides that should be in the carriage
assembly.)
I think the boards were made to do, flat work milling.(again looks to be
un-used)
NOW on to the BIG Question. WHO needs this unit? It could make someone a very
nice machine.( But I cant use it. even though the price looks affordable.)
C.A.G.
On Sunday, September 8, 2019, 11:40:31 AM EDT, MWF
wrote:
#yiv9339034511
body{font-size:10pt;font-family:arial,
sans-serif;background-color:#ff;color:black;}#yiv9339034511
p{margin:0px;}Curt (and all),
I think I said this in an earlier comment on this Mill: I would not be
surprised if the owner of this Mill started to put it together and never got
around to finishing the task. I say this for a couple reasons. It looks too
"pristine" - no Mill I have seen posted for sale has looked this "new".
The photos reflect that it was either:
1. Not completely put together - which is why we don't see the X-Axis rod and
its associated pieces on it, the Follower Nut for the Y-Axis Carriage, and the
"gear train" installed. Even the "Dust Collection" pieces are squeeky clean
and some still in their wrappers.
or2. They put it together; used it; then took it apart and did an
EXCEPTIONALLY GOOD job of cleaning it up for the photographs. (Doesn't pass a
"common sense test".)
What do the rest of ya'll think?
Here is a question I asked earlier - and no one has addressed it. Anyone have
a guess or know what they are for?"Go to the next to the last photo - the one
with the 2 good sized pieces of MDF with bolts & wingnuts in them.
Any idea what those two MDF pieces are for?
My guess is they were to be put horizontally between the two lower frame
extrusions - serving as a work surface for milling flat work pieces."
Thanks.
Mac
-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sep 8, 2019 12:50 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: mill for sale
OK Mac.I did not see that. I was hoping it was there? after-all nothing would
work without it... ;-) Now we need to look for the Acme nut for the carriage.
;-p
As I said earlier,From the posting, the man says he had to cut photo's out to
make room in the E-bay posting. In Good faith, this looks to be a nice machine.
Have a good night.
C.A.G.On Sunday, September 8, 2019, 12:35:47 AM EDT, MWF
wrote:
Curtis,
Then look over on the far left side, running parallel with the left edge of
the MDF panels. See the long Acme threaded X-Axis rod? The Acme rod (Y-Axis)
I referenced earlier (in a different thread about this Mill) as being rusty is
rustier that this X-Axis rod.
Any idea what these two MDF pieces are for? My guess is they were to be put
horizontally between the two lower frame extrusions - serving as a work surface
for milling flat work pieces.
Mac
-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sep 7, 2019 3:56 PM
To: Legacy Ornamental Mills
Subject: Re: mill for sale
Hey guys one more NOTE.On closer look, I do not see a acme screw in the
photos. I hope this is just a mistake? the owner stated like new, and limit on
photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)
C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George
wrote:
Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head
and tail-stock, so it can take lathe adapters, like a drive spur and or live
center I find this useful, On my Legacy.
C.A.G.On Saturday, September 7, 2019, 03:27:12 AM EDT,
bulke...@mmnet.com.au wrote:
#yiv9339034511 -- filtered {panose-1:2 4 5 3 5 4 6 3 2 4;}#yiv9339034511
filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv9339034511
p.yiv9339034511MsoNormal, #yiv9339034511 li.yiv9339034511MsoNormal,
#yiv9339034511 div.yiv9339034511MsoNormal
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv9339034511
a:link, #yiv9339034511 span.yiv9339034511MsoHyperlink
{color:#0563C1;text-decoration:underline;}#yiv9339034511 a:visited,
#yiv9339034511 span.yiv9339034511MsoHyperlinkFollowed
{color:#954F72;text-decoration:underline;}#yiv9339034511
span.yiv9339034511EmailStyle17
{font-family:sans-serif;color:windowtext;}#yiv9339034511
.yiv9339034511MsoChpDefault {font-family:sans-serif;}#yiv9339034511 filtered
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv9339034511
div.yiv9339034511WordSection1 {}#yiv9339034511
Has every one seen this one for sale
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK
Bill
|
|
|
--
You received this message bec
RE: mill for sale
Joe has extra nuts Sent from Samsung tablet Original message From: bulke...@mmnet.com.au Date: 9/8/19 12:04 AM (GMT-08:00) To: legacy-ornamental-mills@googlegroups.com Subject: RE: mill for sale Well hawkeye mac I missed that too lolol Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Sunday, 8 September 2019 2:51 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: mill for sale OK Mac.I did not see that. I was hoping it was there? after-all nothing would work without it... ;-) Now we need to look for the Acme nut for the carriage. ;-p As I said earlier,From the posting, the man says he had to cut photo's out to make room in the E-bay posting. In Good faith, this looks to be a nice machine. Have a good night. C.A.G. On Sunday, September 8, 2019, 12:35:47 AM EDT, MWF wrote: Curtis, Go to the next to the last photo - the one with the 2 good sized pieces of MDF with bolts & wingnuts in them. Then look over on the far left side, running parallel with the left edge of the MDF panels. See the long Acme threaded X-Axis rod? The Acme rod (Y-Axis) I referenced earlier (in a different thread about this Mill) as being rusty is rustier that this X-Axis rod. Any idea what these two MDF pieces are for? My guess is they were to be put horizontally between the two lower frame extrusions - serving as a work surface for milling flat work pieces. Mac-Original Message- From: 'Curt George' via Legacy Ornamental Mills Sent: Sep 7, 2019 3:56 PM To: Legacy Ornamental Mills Subject: Re: mill for sale Hey guys one more NOTE.On closer look, I do not see a acme screw in the photos. I hope this is just a mistake? the owner stated like new, and limit on photos. perhaps it is just not on the unit when the photo was taken? (photo #3.) C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George wrote: Thanks BillI missed this one. Not a bad price if it stays where it is at? some good points are this is an older 1000ex. it has a #2MT. on both the head and tail-stock, so it can take lathe adapters, like a drive spur and or live center I find this useful, On my Legacy. C.A.G.On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au wrote: Has every one seen this one for sale https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK Bill-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2057240623.6548.1567917345021%40wamui-berry.atl.sa.earthlink.net.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/610777529.2601914.1567918240919%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/5d74c9fc.1c69fb81.a1426.b9efSMTPIN_ADDED_MISSING%40gmr-mx.google.com.
RE: mill for sale
Well hawkeye mac I missed that too lolol Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Sunday, 8 September 2019 2:51 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: mill for sale OK Mac. I did not see that. I was hoping it was there? after-all nothing would work without it... ;-) Now we need to look for the Acme nut for the carriage. ;-p As I said earlier,From the posting, the man says he had to cut photo's out to make room in the E-bay posting. In Good faith, this looks to be a nice machine. Have a good night. C.A.G. On Sunday, September 8, 2019, 12:35:47 AM EDT, MWF mailto:mwfos...@earthlink.net> > wrote: Curtis, Go to the next to the last photo - the one with the 2 good sized pieces of MDF with bolts & wingnuts in them. Then look over on the far left side, running parallel with the left edge of the MDF panels. See the long Acme threaded X-Axis rod? The Acme rod (Y-Axis) I referenced earlier (in a different thread about this Mill) as being rusty is rustier that this X-Axis rod. Any idea what these two MDF pieces are for? My guess is they were to be put horizontally between the two lower frame extrusions - serving as a work surface for milling flat work pieces. Mac _ _ -Original Message- From: 'Curt George' via Legacy Ornamental Mills Sent: Sep 7, 2019 3:56 PM To: Legacy Ornamental Mills Subject: Re: mill for sale Hey guys one more NOTE. On closer look, I do not see a acme screw in the photos. I hope this is just a mistake? the owner stated like new, and limit on photos. perhaps it is just not on the unit when the photo was taken? (photo #3.) C.A.G. _ _ On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George mailto:curt.geo...@yahoo.com> > wrote: Thanks Bill I missed this one. Not a bad price if it stays where it is at? some good points are this is an older 1000ex. it has a #2MT. on both the head and tail-stock, so it can take lathe adapters, like a drive spur and or live center I find this useful, On my Legacy. C.A.G. _ _ On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> mailto:bulke...@mmnet.com.au> > wrote: Has every one seen this one for sale https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2057240623.6548.1567917345021%40wamui-berry.atl.sa.earthlink.net <https://groups.google.com/d/msgid/legacy-ornamental-mills/2057240623.6548.1567917345021%40wamui-berry.atl.sa.earthlink.net?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/610777529.2601914.1567918240919%40mail.yahoo.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/610777529.2601914.1567918240919%40mail.yahoo.com?utm_medium=email_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003d01d56613%24b9d196b0%242d74c410%24%40mmnet.com.au.
Re: mill for sale
OK Mac.I did not see that. I was hoping it was there? after-all nothing would
work without it... ;-) Now we need to look for the Acme nut for the carriage.
;-p
As I said earlier,From the posting, the man says he had to cut photo's out to
make room in the E-bay posting. In Good faith, this looks to be a nice machine.
Have a good night.
C.A.G.
On Sunday, September 8, 2019, 12:35:47 AM EDT, MWF
wrote:
Curtis,
Go to the next to the last photo - the one with the 2 good sized pieces of MDF
with bolts & wingnuts in them. Then look over on the far left side, running
parallel with the left edge of the MDF panels. See the long Acme threaded
X-Axis rod? The Acme rod (Y-Axis) I referenced earlier (in a different thread
about this Mill) as being rusty is rustier that this X-Axis rod.
Any idea what these two MDF pieces are for? My guess is they were to be put
horizontally between the two lower frame extrusions - serving as a work surface
for milling flat work pieces.
Mac
-Original Message-
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sep 7, 2019 3:56 PM
To: Legacy Ornamental Mills
Subject: Re: mill for sale
Hey guys one more NOTE.On closer look, I do not see a acme screw in the
photos. I hope this is just a mistake? the owner stated like new, and limit on
photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)
C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George
wrote:
Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head
and tail-stock, so it can take lathe adapters, like a drive spur and or live
center I find this useful, On my Legacy.
C.A.G.On Saturday, September 7, 2019, 03:27:12 AM EDT,
bulke...@mmnet.com.au wrote:
#yiv5587322005 -- filtered {panose-1:2 4 5 3 5 4 6 3 2 4;}#yiv5587322005
filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv5587322005
p.yiv5587322005MsoNormal, #yiv5587322005 li.yiv5587322005MsoNormal,
#yiv5587322005 div.yiv5587322005MsoNormal
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv5587322005
a:link, #yiv5587322005 span.yiv5587322005MsoHyperlink
{color:#0563C1;text-decoration:underline;}#yiv5587322005 a:visited,
#yiv5587322005 span.yiv5587322005MsoHyperlinkFollowed
{color:#954F72;text-decoration:underline;}#yiv5587322005
span.yiv5587322005EmailStyle17
{font-family:sans-serif;color:windowtext;}#yiv5587322005
.yiv5587322005MsoChpDefault {font-family:sans-serif;}#yiv5587322005 filtered
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv5587322005
div.yiv5587322005WordSection1 {}#yiv5587322005
Has every one seen this one for sale
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK
Bill
|
|
|
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/2057240623.6548.1567917345021%40wamui-berry.atl.sa.earthlink.net.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/610777529.2601914.1567918240919%40mail.yahoo.com.
Re: mill for sale
This E-bay sale looks Fishy to me. Lots of stuff,but No pictures of 1200???
only advertisements from catalog.
C.A.G.
Legacy Ornamental mill machines!!! Model 1200 | eBay
|
|
|
| $1895.00 | |
|
|
|
| |
Legacy Ornamental mill machines!!! Model 1200 | eBay
Unit creates various wood moldings such as spindles, spirals, and fluted rope
moldings. Many other molding profi...
|
|
|
On Saturday, September 7, 2019, 03:56:44 PM EDT, 'Curt George' via Legacy
Ornamental Mills wrote:
Hey guys one more NOTE.On closer look, I do not see a acme screw in the
photos. I hope this is just a mistake? the owner stated like new, and limit on
photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)
C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George
wrote:
Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head
and tail-stock, so it can take lathe adapters, like a drive spur and or live
center I find this useful, On my Legacy.
C.A.G.
On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au
wrote:
#yiv6758404965 -- filtered {panose-1:2 4 5 3 5 4 6 3 2 4;}#yiv6758404965
filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv6758404965
p.yiv6758404965MsoNormal, #yiv6758404965 li.yiv6758404965MsoNormal,
#yiv6758404965 div.yiv6758404965MsoNormal
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv6758404965
a:link, #yiv6758404965 span.yiv6758404965MsoHyperlink
{color:#0563C1;text-decoration:underline;}#yiv6758404965 a:visited,
#yiv6758404965 span.yiv6758404965MsoHyperlinkFollowed
{color:#954F72;text-decoration:underline;}#yiv6758404965
span.yiv6758404965EmailStyle17
{font-family:sans-serif;color:windowtext;}#yiv6758404965
.yiv6758404965MsoChpDefault {font-family:sans-serif;}#yiv6758404965 filtered
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv6758404965
div.yiv6758404965WordSection1 {}#yiv6758404965
Has every one seen this one for sale
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK
Bill
| | Virus-free. www.avast.com |
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d5654d%24a4bfad50%24ee3f07f0%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/158365432.2527732.1567886198915%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1809134514.2553832.1567886556550%40mail.yahoo.com.
Re: mill for sale
Hey guys one more NOTE.On closer look, I do not see a acme screw in the
photos. I hope this is just a mistake? the owner stated like new, and limit on
photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)
C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George
wrote:
Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head
and tail-stock, so it can take lathe adapters, like a drive spur and or live
center I find this useful, On my Legacy.
C.A.G.
On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au
wrote:
#yiv1598306812 #yiv1598306812 -- filtered {panose-1:2 4 5 3 5 4 6 3 2
4;}#yiv1598306812 filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2
4;}#yiv1598306812 p.yiv1598306812MsoNormal, #yiv1598306812
li.yiv1598306812MsoNormal, #yiv1598306812 div.yiv1598306812MsoNormal
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv1598306812
a:link, #yiv1598306812 span.yiv1598306812MsoHyperlink
{color:#0563C1;text-decoration:underline;}#yiv1598306812 a:visited,
#yiv1598306812 span.yiv1598306812MsoHyperlinkFollowed
{color:#954F72;text-decoration:underline;}#yiv1598306812
span.yiv1598306812EmailStyle17
{font-family:sans-serif;color:windowtext;}#yiv1598306812
.yiv1598306812MsoChpDefault {font-family:sans-serif;}#yiv1598306812 filtered
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv1598306812
div.yiv1598306812WordSection1 {}#yiv1598306812
Has every one seen this one for sale
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK
Bill
| | Virus-free. www.avast.com |
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d5654d%24a4bfad50%24ee3f07f0%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/158365432.2527732.1567886198915%40mail.yahoo.com.
Re: mill for sale
Thanks BillI missed this one. Not a bad price if it stays where it is at? some good points are this is an older 1000ex. it has a #2MT. on both the head and tail-stock, so it can take lathe adapters, like a drive spur and or live center I find this useful, On my Legacy. C.A.G. On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au wrote: Has every one seen this one for sale https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK Bill | | Virus-free. www.avast.com | -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d5654d%24a4bfad50%24ee3f07f0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/936198097.2536459.1567885649311%40mail.yahoo.com.
Re: mill for sale
Hello everyone. This machine looks Great, mint condition , lot of goodies... one small tid-bit though the head stock is bushings not ball bearings. for most that little fact will mean very little, the bushings are easy to replace and not expensive, but for those of you who turn Heavy wood stock, this means you will need to replace the bushing, more often,So call Legacy and see if you can still buy those bushings, Im sure that it will be no problem, but it is something that should be known. for the price, I think this machine is a good deal. Have a great day. C.A.G. - Original Message - not sure if any one has posted this one but in case http://www.ebay.com/itm/LEGACY-WOOD-MILLING-MACHINE-/301209647997?pt=LH_DefaultDomain_0hash=item46217e7b7d Bill -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Mill for sale
I am in south western Vermont, about 45 minutes east of Albany New York. I am not selling out, I have an extra mill. I bought an unused 1800 a little while ago with a few options, dust collection, casters, gear sets, lots of router bits. I then found another mill in Boston from the original owner that had the z-axis upgrade, template follower upgrade, rotary table, vertical and horizontal clamps and more bits all still in the original boxes. The mill I'm selling does have the .25 and x2 gear sets. I don't need 2. I will try to post some pictures soon. The price negotiable. Thanks Paul. On Tuesday, June 10, 2014 4:04:31 AM UTC-4, Curtis wrote: Hello Paul. Where are you located? I honestly hate to hear of one of your members selling out, but hopefully someone here might be able to help you out with you sale of your 1800 ? Do you have any extras? like gear setting's ( .25 or X2) or, circler table or Z axis... It would help to know exactly what your selling, a picture or two might help also help. I wish you luck, C.A.G. -- I have a Legacy 1800 for sale. It is the basic unit with a porter cable plunge router and casters. Asking $2000.00 Thanks Paul. 802-688-4412 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com javascript:. To post to this group, send email to legacy-orna...@googlegroups.com javascript:. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Mill for sale
Hello Paul. Where are you located? I honestly hate to hear of one of your members selling out, but hopefully someone here might be able to help you out with you sale of your 1800 ? Do you have any extras? like gear setting's ( .25 or X2) or, circler table or Z axis... It would help to know exactly what your selling, a picture or two might help also help. I wish you luck, C.A.G. - Original Message - I have a Legacy 1800 for sale. It is the basic unit with a porter cable plunge router and casters. Asking $2000.00 Thanks Paul. 802-688-4412 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: mill for sale
Nice find Bill I over looked this one. Its not a 1000 even if the head stock sticker is. This is a 800 EX series. (if you look in the Legacy mag. vol. 2 page 17 this unit is the one in the picture.) I think that price is also to high. But it is a buyers market? have a good night all. C.A.G. - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, November 30, 2013 4:15 PM Subject: mill for sale Im sure begat has probably posted this but in case he missed it Here is another mill for sale a 1000 so it says http://www.ebay.com/itm/Legacy-1000-Ornamental-Milling-Machine-/151175393031?pt=LH_DefaultDomain_0hash=item2332c16f07 Bill -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out.
Re: mill for sale
You are correct Curt. This is not the first time the machine has been listed on Ebay. I sent a note to the seller letting them know the machine is not a model 1000 but I did not get any reply and there has been no change in the listing details. None of this is true. a.. 3.5 thick by 14 wide flat stock capacity ( actual 2 x8) a.. 10 dia. by 60 round stock capacity (actual 7.5 x 48) a.. Spiral Pitches: 2, 3, 4, 4 1/2, 5, 6, and 7 1/2 per rotation ( actually only 2,3, and 6) a.. #2MT Headstock and Tailstock ( actual threaded screw ) a.. Live Center (Tailstock) ( actually fixed ) a.. Quick release tailstock ( actually a threaded rod ) It might also be missing a split nut on the x-axis as it's missing in the photo. I also don't see the adjustment arm or any gears. I say that machine is worth $400-$600 as it sits. Buyer Beware... -Tim - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, November 30, 2013 2:33 PM Subject: Re: mill for sale Nice find Bill I over looked this one. Its not a 1000 even if the head stock sticker is. This is a 800 EX series. (if you look in the Legacy mag. vol. 2 page 17 this unit is the one in the picture.) I think that price is also to high. But it is a buyers market? have a good night all. C.A.G. - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, November 30, 2013 4:15 PM Subject: mill for sale Im sure begat has probably posted this but in case he missed it Here is another mill for sale a 1000 so it says http://www.ebay.com/itm/Legacy-1000-Ornamental-Milling-Machine-/151175393031?pt=LH_DefaultDomain_0hash=item2332c16f07 Bill -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/groups/opt_out.
