Re: Tapering spiral

2018-03-12 Thread Patrick Salter 
Thanks 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Tapering spiral

2018-03-12 Thread Okla Mike (Liltwisted) 

Yes

Study the pictures, it shows you lathe as well as milling use.  Just 
make sure you are able to use the same mount or chuck accurately on both 
machines. The flame point was left strong and I finished them to a point 
with a dremmel off the machines.


Mike OK

On 3/12/2018 11:41 AM, Patrick Salter wrote:

I had seen this and it is definitely on my to-do list. My biggest problem is 
doing the flame part.
I would do the base on the lathe but would I then turn the rough shape of the 
flame? Leaving the piece in my chuck, mount in the legacy to do the three sides?



--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Tapering spiral

2018-03-12 Thread Patrick Salter 
I had seen this and it is definitely on my to-do list. My biggest problem is 
doing the flame part. 
I would do the base on the lathe but would I then turn the rough shape of the 
flame? Leaving the piece in my chuck, mount in the legacy to do the three sides?

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Tapering spiral

2018-03-12 Thread Bill Bulkeley 
Thank you I’m slowly coming back

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Monday, 12 March 2018 6:49 PM
To: Legacy Ornamental Mills
Subject: Re: Tapering spiral

 

Thanks Bill

That is the very one I was looking for. 

I am going through all the old posts and if there are good "How to's " I print 
them off and place into a folder.

I did make my own type of Shopsmith duplicator, but it went with a lathe that 
was sold. Will have to make another !!

Nice to see you back Bill

Regards

Richard

On Monday, March 12, 2018 at 12:21:02 AM UTC, aussiman wrote:

 

http://ornamentalmills.com/mike_pung/flame_finial/flame_finials.html

 

Bill  

From: legacy-orna...@googlegroups.com   
[mailto:legacy-ornamental-mills@googlegroups.com  ] On Behalf Of 
MAX LATHAM
Sent: Monday, 12 March 2018 5:03 AM
To: legacy-orna...@googlegroups.com  
Subject: Re: Tapering spiral

 

And I'd like to see that link as I need to finish a pencil bed frame with a 
finial.

thanks guys for the almost continuous education

max

 

  _  

From: legacy-orna...@googlegroups.com   
<legacy-orna...@googlegroups.com  > on behalf of Richard Ellis 
<rchrd@gmail.com  >
Sent: Sunday, March 11, 2018 11:49 AM
To: Legacy Ornamental Mills
Subject: Tapering spiral 

 

Hi All 

A while ago I came across an old post by Mike showing some pointed and spiral 
finals that he made . Search as I may I just can't find it again anyone know 
how to get to it again.

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To post to this group, send email to legacy-orna...@googlegroups.com 
 .
Visit this group at https://groups.google.com/group/legacy-ornamental-mills. 


 <https://groups.google.com/group/legacy-ornamental-mills> Google Groups

groups.google.com

Google Groups allows you to create and participate in online forums and 
email-based groups with a rich experience for community conversations.


For more options, visit https://groups.google.com/d/optout. 


 <https://groups.google.com/d/optout> Google Groups

groups.google.com

Google Groups allows you to create and participate in online forums and 
email-based groups with a rich experience for community conversations.

 

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To post to this group, send email to legacy-orna...@googlegroups.com 
 .
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Tapering spiral

2018-03-12 Thread Richard Ellis 
Thanks Bill
That is the very one I was looking for. 
I am going through all the old posts and if there are good "How to's " I 
print them off and place into a folder.
I did make my own type of Shopsmith duplicator, but it went with a lathe 
that was sold. Will have to make another !!
Nice to see you back Bill
Regards
Richard

On Monday, March 12, 2018 at 12:21:02 AM UTC, aussiman wrote:
>
>  
>
> http://ornamentalmills.com/mike_pung/flame_finial/flame_finials.html
>
>  
>
> Bill  
>
> *From:* legacy-orna...@googlegroups.com  [mailto:
> legacy-ornamental-mills@googlegroups.com ] *On Behalf Of *MAX 
> LATHAM
> *Sent:* Monday, 12 March 2018 5:03 AM
> *To:* legacy-orna...@googlegroups.com 
> *Subject:* Re: Tapering spiral
>
>  
>
> And I'd like to see that link as I need to finish a pencil bed frame with 
> a finial.
>
> thanks guys for the almost continuous education
>
> max
>
>  
> --
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > on behalf of Richard Ellis 
> <rchrd@gmail.com >
> *Sent:* Sunday, March 11, 2018 11:49 AM
> *To:* Legacy Ornamental Mills
> *Subject:* Tapering spiral 
>
>  
>
> Hi All 
>
> A while ago I came across an old post by Mike showing some pointed and 
> spiral finals that he made . Search as I may I just can't find it again 
> anyone know how to get to it again.
>
> Richard
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at 
> https://groups.google.com/group/legacy-ornamental-mills. 
>
> Google Groups <https://groups.google.com/group/legacy-ornamental-mills>
>
> groups.google.com
>
> Google Groups allows you to create and participate in online forums and 
> email-based groups with a rich experience for community conversations.
>
>
> For more options, visit https://groups.google.com/d/optout. 
>
> Google Groups <https://groups.google.com/d/optout>
>
> groups.google.com
>
> Google Groups allows you to create and participate in online forums and 
> email-based groups with a rich experience for community conversations.
>
>  
>
>  
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com 
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at 
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Tapering spiral

2018-03-11 Thread Bill Bulkeley 
 

http://ornamentalmills.com/mike_pung/flame_finial/flame_finials.html

 

Bill  

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MAX LATHAM
Sent: Monday, 12 March 2018 5:03 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Tapering spiral

 

And I'd like to see that link as I need to finish a pencil bed frame with a 
finial.

thanks guys for the almost continuous education

max

 

  _  

From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of Richard Ellis 
<rchrd.ell...@gmail.com>
Sent: Sunday, March 11, 2018 11:49 AM
To: Legacy Ornamental Mills
Subject: Tapering spiral 

 

Hi All 

A while ago I came across an old post by Mike showing some pointed and spiral 
finals that he made . Search as I may I just can't find it again anyone know 
how to get to it again.

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills. 


 <https://groups.google.com/group/legacy-ornamental-mills> Google Groups

groups.google.com

Google Groups allows you to create and participate in online forums and 
email-based groups with a rich experience for community conversations.


For more options, visit https://groups.google.com/d/optout. 


 <https://groups.google.com/d/optout> Google Groups

groups.google.com

Google Groups allows you to create and participate in online forums and 
email-based groups with a rich experience for community conversations.

 

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Tapering spiral

2018-03-11 Thread 'Curt George' via Legacy Ornamental Mills 
Sorry guys I meant to say, Cutting a Rope on a Tapper...
C.A.G. 

On Sunday, March 11, 2018 5:57 PM, 'Curt George' via Legacy Ornamental 
Mills  wrote:
 

 HelloI can not answer for what Mike did. But I have a good method to cut on a 
tapper that has served me well.
Cut form the side for the spindle using a template, and a side cutting router 
bit.. (you could also use a ball bearing on a router bit riding on the side of 
a spindle, but this method has its own draw backs, due to the bearing falling 
into a grove that was already cut.ruining the part...)Any of these Magnate bits 
will do a good job cutting form the side to make a 
rope..http://www.magnate.net/SearchResults.asp?Cat=900224 
http://www.magnate.net/SearchResults.asp?Cat=900158 
http://www.magnate.net/SearchResults.asp?Cat=900159
NOW if you want to experiment on new ideas. Try this  "Pung" idea. 
https://www.youtube.com/watch?v=nh1JTcyLWOI 
I Hope this helps?
Talk to you all more latter.
C.A.G.



 

On Sunday, March 11, 2018 2:03 PM, MAX LATHAM  wrote:
 

 #yiv9702660694 -- P {margin-top:0;margin-bottom:0;}#yiv9702660694 And I'd like 
to see that link as I need to finish a pencil bed frame with a finial.thanks 
guys for the almost continuous educationmax


From: legacy-ornamental-mills@googlegroups.com 
 on behalf of Richard Ellis 

Sent: Sunday, March 11, 2018 11:49 AM
To: Legacy Ornamental Mills
Subject: Tapering spiral Hi AllA while ago I came across an old post by Mike 
showing some pointed and spiral finals that he made . Search as I may I just 
can't find it again anyone know how to get to it again.Richard-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
tolegacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
| Google Groupsgroups.google.comGoogle Groups allows you to create and 
participate in online forums and email-based groups with a rich experience for 
community conversations. |


For more options, visit https://groups.google.com/d/optout.
| Google Groupsgroups.google.comGoogle Groups allows you to create and 
participate in online forums and email-based groups with a rich experience for 
community conversations. |


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


   -- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Tapering spiral

2018-03-11 Thread 'Curt George' via Legacy Ornamental Mills 
HelloI can not answer for what Mike did. But I have a good method to cut on a 
tapper that has served me well.
Cut form the side for the spindle using a template, and a side cutting router 
bit.. (you could also use a ball bearing on a router bit riding on the side of 
a spindle, but this method has its own draw backs, due to the bearing falling 
into a grove that was already cut.ruining the part...)Any of these Magnate bits 
will do a good job cutting form the side to make a 
rope..http://www.magnate.net/SearchResults.asp?Cat=900224 
http://www.magnate.net/SearchResults.asp?Cat=900158 
http://www.magnate.net/SearchResults.asp?Cat=900159
NOW if you want to experiment on new ideas. Try this  "Pung" idea. 
https://www.youtube.com/watch?v=nh1JTcyLWOI 
I Hope this helps?
Talk to you all more latter.
C.A.G.



 

On Sunday, March 11, 2018 2:03 PM, MAX LATHAM  wrote:
 

 #yiv2243078666 #yiv2243078666 -- P 
{margin-top:0;margin-bottom:0;}#yiv2243078666 And I'd like to see that link as 
I need to finish a pencil bed frame with a finial.thanks guys for the almost 
continuous educationmax


From: legacy-ornamental-mills@googlegroups.com 
 on behalf of Richard Ellis 

Sent: Sunday, March 11, 2018 11:49 AM
To: Legacy Ornamental Mills
Subject: Tapering spiral Hi AllA while ago I came across an old post by Mike 
showing some pointed and spiral finals that he made . Search as I may I just 
can't find it again anyone know how to get to it again.Richard-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
tolegacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
| Google Groupsgroups.google.comGoogle Groups allows you to create and 
participate in online forums and email-based groups with a rich experience for 
community conversations. |


For more options, visit https://groups.google.com/d/optout.
| Google Groupsgroups.google.comGoogle Groups allows you to create and 
participate in online forums and email-based groups with a rich experience for 
community conversations. |


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Tapering spiral

2018-03-11 Thread MAX LATHAM 
And I'd like to see that link as I need to finish a pencil bed frame with a 
finial.

thanks guys for the almost continuous education

max



From: legacy-ornamental-mills@googlegroups.com 
 on behalf of Richard Ellis 

Sent: Sunday, March 11, 2018 11:49 AM
To: Legacy Ornamental Mills
Subject: Tapering spiral

Hi All
A while ago I came across an old post by Mike showing some pointed and spiral 
finals that he made . Search as I may I just can't find it again anyone know 
how to get to it again.
Richard

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
Google Groups
groups.google.com
Google Groups allows you to create and participate in online forums and 
email-based groups with a rich experience for community conversations.


For more options, visit https://groups.google.com/d/optout.
Google Groups
groups.google.com
Google Groups allows you to create and participate in online forums and 
email-based groups with a rich experience for community conversations.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.