Re: REVO small parts storage
Thanks for the info on your project cabinet. Ken On Wed, Apr 3, 2024 at 9:52 PM cdkr...@gmail.com wrote: > The drawers are about 1 1/2" deep, 3-4" wide and 6" deep. The handles > are French cleats glued to the front. It's memory test to remember > where I put what. > DanK > > On Wednesday, April 3, 2024 at 10:53:20 AM UTC-4 Ccm Ccm wrote: > >> Very nice >> >> On Tuesday, April 2, 2024, cdkr...@gmail.com wrote: >> >>> Hi guys. >>> Haven't melted or drowned in the heavy rains so far! >>> >>> Here is the finished small part storage for the REVO that I started a >>> LONG time ago it seems. 25 drawers is a LOT of tedium for a shiny squirrel >>> guy like me. All cherry from the same board, plywood bottoms. Hung on >>> French cleat. REVO cut all the box joints. Now it's a matter of "sorting >>> potatoes". Deft lacquer finish. >>> [image: REVOSmallParts.PNG] >>> DanK >>> >>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> >> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsub...@googlegroups.com. >> >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/4d71693a-8842-4356-ab0d-3d240eeb0672n%40googlegroups.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4d71693a-8842-4356-ab0d-3d240eeb0672n%40googlegroups.com?utm_medium=email_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/2081f80f-9bf9-40bb-b408-b65aba170f4en%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2081f80f-9bf9-40bb-b408-b65aba170f4en%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAE5s5cu3LUfhXnvXLL4Mf79OiTMFZTskA6ST6Vynt9Tq6TVUQA%40mail.gmail.com.
Re: REVO small parts storage
yeah you did a great job Dan. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Wed, Apr 3, 2024 at 8:52 PM cdkr...@gmail.com wrote: > The drawers are about 1 1/2" deep, 3-4" wide and 6" deep. The handles > are French cleats glued to the front. It's memory test to remember > where I put what. > DanK > > On Wednesday, April 3, 2024 at 10:53:20 AM UTC-4 Ccm Ccm wrote: > >> Very nice >> >> On Tuesday, April 2, 2024, cdkr...@gmail.com wrote: >> >>> Hi guys. >>> Haven't melted or drowned in the heavy rains so far! >>> >>> Here is the finished small part storage for the REVO that I started a >>> LONG time ago it seems. 25 drawers is a LOT of tedium for a shiny squirrel >>> guy like me. All cherry from the same board, plywood bottoms. Hung on >>> French cleat. REVO cut all the box joints. Now it's a matter of "sorting >>> potatoes". Deft lacquer finish. >>> [image: REVOSmallParts.PNG] >>> DanK >>> >>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> >> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsub...@googlegroups.com. >> >> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/4d71693a-8842-4356-ab0d-3d240eeb0672n%40googlegroups.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4d71693a-8842-4356-ab0d-3d240eeb0672n%40googlegroups.com?utm_medium=email_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/2081f80f-9bf9-40bb-b408-b65aba170f4en%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2081f80f-9bf9-40bb-b408-b65aba170f4en%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFOonsRFrTc%3DysqWhgr3Z4JDdN5ZG6qWPYHvqgWyDWhGg%40mail.gmail.com.
Re: REVO small parts storage
The drawers are about 1 1/2" deep, 3-4" wide and 6" deep. The handles are French cleats glued to the front. It's memory test to remember where I put what. DanK On Wednesday, April 3, 2024 at 10:53:20 AM UTC-4 Ccm Ccm wrote: > Very nice > > On Tuesday, April 2, 2024, cdkr...@gmail.com wrote: > >> Hi guys. >> Haven't melted or drowned in the heavy rains so far! >> >> Here is the finished small part storage for the REVO that I started a >> LONG time ago it seems. 25 drawers is a LOT of tedium for a shiny squirrel >> guy like me. All cherry from the same board, plywood bottoms. Hung on >> French cleat. REVO cut all the box joints. Now it's a matter of "sorting >> potatoes". Deft lacquer finish. >> [image: REVOSmallParts.PNG] >> DanK >> >> -- >> > You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> > To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsub...@googlegroups.com. > > >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/4d71693a-8842-4356-ab0d-3d240eeb0672n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4d71693a-8842-4356-ab0d-3d240eeb0672n%40googlegroups.com?utm_medium=email_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2081f80f-9bf9-40bb-b408-b65aba170f4en%40googlegroups.com.
Re: Finger joints on the REVO
Great videos, I am open to knew things so who knows what I may start experimenting . Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Jan 21, 2024 at 1:21 PM cdkr...@gmail.com wrote: > Promised videos. One shows process > <https://drive.google.com/file/d/1SBT1Huob8SRbCPN5kPb1sb5xum2QHB1m/view?usp=sharing>, > other shows results > <https://drive.google.com/file/d/1h1NOpRHSAQ7-BU0b1BZNhDgJpEaOhZyH/view?usp=sharing>. > > DanK > > > On Saturday, January 20, 2024 at 11:22:29 PM UTC-5 Curt George wrote: > >> Hey there Dan. >> >> Very nice. I am glad to hear your Revo is working out well. ;-) >> >> Keep up the good work. >> >> C.A.G. >> >> On Saturday, January 20, 2024 at 10:20:49 PM EST, Tim Ziegler < >> timjz...@gmail.com> wrote: >> >> >> Great job Dan keep up the amazing work. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Sat, Jan 20, 2024 at 4:35 PM cdkr...@gmail.com >> wrote: >> >> Some frustrating dilly dallying around with cheap plywood finally >> motivated me to plane some more "junk wood" cherry and make >> all the drawers of solid wood. I'll not make that mistake again! >> This cuts SO beautifully with no tear out, no backers, no scoring. >> I'm working through making 25 little drawers to fit in the case, >> 16 small ones and 9 larger ones. I'll have couple more pictures >> and perhaps a video of this process. The accuracy is almost >> unbelievable if one is careful. These pictures show the assembled >> case (less shelves) waiting for warm day to spray lacquer and a >> little jig for squaring up the parts for pinning with 2 -23 ga pins to >> hold a bundle of four. The bundling makes quick work of cutting >> the fingers on the REVO using the ruler to verify index spacing of >> turning the crank. >> >> [image: Capture1.PNG] [image: Capture.PNG] >> DanK >> >> On Monday, January 8, 2024 at 8:55:52 PM UTC-5 Tim Ziegler wrote: >> >> Thanks Dan, >> >> Very interesting. That's how I envisioned it by what you explained. >> great job and so glad it's working out like you hoped. >> Keep me posted in how it goes. It appears to be more meticulous than my >> Omni Jig however. >> I still want to do it just so I can say I did. loll >> >> Keep up the great work Dan. >> >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Mon, Jan 8, 2024 at 4:02 PM cdkr...@gmail.com >> wrote: >> >> There was interest in how I used the REVO to cut finger joints. So here >> are some pictures: >> [image: Capture.PNG] [image: Capture4.PNG] >> [image: Capture2.PNG] >> >> [image: Capture3.PNG] >> >> Using a 1/2" straight bit and the REVO frame ruler to verify positioning >> of 4 crank turns for indexing, I cut two joints at a time with the bundles >> offset 1/2". Then turn them over and reset for the other two joints. It >> works out the best to pin the two sides together and the top and bottom >> together in the orientation they will be assembled, then offset those >> "bundles" under the clamps. I use the triangle marking system to keep track >> of orientation. >> >> The first clamp setup was very awkward because of clearance issues. So I >> reworked the clamping idea using my shop clamp system started and expanded >> from Shopsmith.system. The second picture shows it to be much handier. >> >> The other pictures show how accurate the results are. I used no backer >> board, but you can see that I did score a line where the bit exits. Clean. >> >> Next up, a whole bunch of drawers. >> DanK >> >> -- >> >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-orname
RE: Finger joints on the REVO
Thank you Dan well done as far as I know you are the first to video box joints being made on the legacy Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of cdkr...@gmail.com Sent: Monday, January 22, 2024 6:21 AM To: Legacy Ornamental Mills Subject: Re: Finger joints on the REVO Promised videos. One shows process <https://drive.google.com/file/d/1SBT1Huob8SRbCPN5kPb1sb5xum2QHB1m/view?usp=sharing> , other shows results <https://drive.google.com/file/d/1h1NOpRHSAQ7-BU0b1BZNhDgJpEaOhZyH/view?usp=sharing> . DanK On Saturday, January 20, 2024 at 11:22:29 PM UTC-5 Curt George wrote: Hey there Dan. Very nice. I am glad to hear your Revo is working out well. ;-) Keep up the good work. C.A.G. On Saturday, January 20, 2024 at 10:20:49 PM EST, Tim Ziegler mailto:timjz...@gmail.com> > wrote: Great job Dan keep up the amazing work. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Jan 20, 2024 at 4:35 PM cdkr...@gmail.com <mailto:cdkr...@gmail.com> mailto:cdkr...@gmail.com> > wrote: Some frustrating dilly dallying around with cheap plywood finally motivated me to plane some more "junk wood" cherry and make all the drawers of solid wood. I'll not make that mistake again! This cuts SO beautifully with no tear out, no backers, no scoring. I'm working through making 25 little drawers to fit in the case, 16 small ones and 9 larger ones. I'll have couple more pictures and perhaps a video of this process. The accuracy is almost unbelievable if one is careful. These pictures show the assembled case (less shelves) waiting for warm day to spray lacquer and a little jig for squaring up the parts for pinning with 2 -23 ga pins to hold a bundle of four. The bundling makes quick work of cutting the fingers on the REVO using the ruler to verify index spacing of turning the crank. <https://groups.google.com/group/legacy-ornamental-mills/attach/4422e9eb8f38b/Capture1.PNG?part=0.2=1> <https://groups.google.com/group/legacy-ornamental-mills/attach/4422e9eb8f38b/Capture.PNG?part=0.1=1> DanK On Monday, January 8, 2024 at 8:55:52 PM UTC-5 Tim Ziegler wrote: Thanks Dan, Very interesting. That's how I envisioned it by what you explained. great job and so glad it's working out like you hoped. Keep me posted in how it goes. It appears to be more meticulous than my Omni Jig however. I still want to do it just so I can say I did. loll Keep up the great work Dan. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jan 8, 2024 at 4:02 PM cdkr...@gmail.com <mailto:cdkr...@gmail.com> mailto:cdkr...@gmail.com> > wrote: There was interest in how I used the REVO to cut finger joints. So here are some pictures: <https://groups.google.com/group/legacy-ornamental-mills/attach/d567ca40562/Capture.PNG?part=0.1=1> <https://groups.google.com/group/legacy-ornamental-mills/attach/d567ca40562/Capture4.PNG?part=0.3=1> <https://groups.google.com/group/legacy-ornamental-mills/attach/d567ca40562/Capture2.PNG?part=0.2=1> <https://groups.google.com/group/legacy-ornamental-mills/attach/d567ca40562/Capture3.PNG?part=0.4=1> Using a 1/2" straight bit and the REVO frame ruler to verify positioning of 4 crank turns for indexing, I cut two joints at a time with the bundles offset 1/2". Then turn them over and reset for the other two joints. It works out the best to pin the two sides together and the top and bottom together in the orientation they will be assembled, then offset those "bundles" under the clamps. I use the triangle marking system to keep track of orientation. The first clamp setup was very awkward because of clearance issues. So I reworked the clamping idea using my shop clamp system started and expanded from Shopsmith.system. The second picture shows it to be much handier. The other pictures show how accurate the results are. I used no backer board, but you can see that I did score a line where the bit exits. Clean. Next up, a whole bunch of drawers. DanK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/564d3420-93d4-4835-bf0c-86d068b8800cn%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills
Re: Finger joints on the REVO
Promised videos. One shows process <https://drive.google.com/file/d/1SBT1Huob8SRbCPN5kPb1sb5xum2QHB1m/view?usp=sharing>, other shows results <https://drive.google.com/file/d/1h1NOpRHSAQ7-BU0b1BZNhDgJpEaOhZyH/view?usp=sharing>. DanK On Saturday, January 20, 2024 at 11:22:29 PM UTC-5 Curt George wrote: > Hey there Dan. > > Very nice. I am glad to hear your Revo is working out well. ;-) > > Keep up the good work. > > C.A.G. > > On Saturday, January 20, 2024 at 10:20:49 PM EST, Tim Ziegler < > timjz...@gmail.com> wrote: > > > Great job Dan keep up the amazing work. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Sat, Jan 20, 2024 at 4:35 PM cdkr...@gmail.com > wrote: > > Some frustrating dilly dallying around with cheap plywood finally > motivated me to plane some more "junk wood" cherry and make > all the drawers of solid wood. I'll not make that mistake again! > This cuts SO beautifully with no tear out, no backers, no scoring. > I'm working through making 25 little drawers to fit in the case, > 16 small ones and 9 larger ones. I'll have couple more pictures > and perhaps a video of this process. The accuracy is almost > unbelievable if one is careful. These pictures show the assembled > case (less shelves) waiting for warm day to spray lacquer and a > little jig for squaring up the parts for pinning with 2 -23 ga pins to > hold a bundle of four. The bundling makes quick work of cutting > the fingers on the REVO using the ruler to verify index spacing of > turning the crank. > > [image: Capture1.PNG] [image: Capture.PNG] > DanK > > On Monday, January 8, 2024 at 8:55:52 PM UTC-5 Tim Ziegler wrote: > > Thanks Dan, > > Very interesting. That's how I envisioned it by what you explained. > great job and so glad it's working out like you hoped. > Keep me posted in how it goes. It appears to be more meticulous than my > Omni Jig however. > I still want to do it just so I can say I did. loll > > Keep up the great work Dan. > > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Jan 8, 2024 at 4:02 PM cdkr...@gmail.com > wrote: > > There was interest in how I used the REVO to cut finger joints. So here > are some pictures: > [image: Capture.PNG] [image: Capture4.PNG] > [image: Capture2.PNG] > > [image: Capture3.PNG] > > Using a 1/2" straight bit and the REVO frame ruler to verify positioning > of 4 crank turns for indexing, I cut two joints at a time with the bundles > offset 1/2". Then turn them over and reset for the other two joints. It > works out the best to pin the two sides together and the top and bottom > together in the orientation they will be assembled, then offset those > "bundles" under the clamps. I use the triangle marking system to keep track > of orientation. > > The first clamp setup was very awkward because of clearance issues. So I > reworked the clamping idea using my shop clamp system started and expanded > from Shopsmith.system. The second picture shows it to be much handier. > > The other pictures show how accurate the results are. I used no backer > board, but you can see that I did score a line where the bit exits. Clean. > > Next up, a whole bunch of drawers. > DanK > > -- > > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/564d3420-93d4-4835-bf0c-86d068b8800cn%40googlegroups.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/564d3420-93d4-4835-bf0c-86d068b8800cn%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b61c7076-dc8a-4ff3-8a60-cce0658e6a62n%40googlegroups.com > > <https://groups.google.com/d/msgid/lega
Re: Finger joints on the REVO
great to have all the details. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Jan 20, 2024 at 5:01 PM cdkr...@gmail.com wrote: > Forgot to mention...those slots for the shelves are French dovetail > (sliding dovetail) and the mail parts were hand planed with a > Stanley 444 dovetail plane. Fun. > > DanK > On Saturday, January 20, 2024 at 5:35:53 PM UTC-5 cdkr...@gmail.com wrote: > >> Some frustrating dilly dallying around with cheap plywood finally >> motivated me to plane some more "junk wood" cherry and make >> all the drawers of solid wood. I'll not make that mistake again! >> This cuts SO beautifully with no tear out, no backers, no scoring. >> I'm working through making 25 little drawers to fit in the case, >> 16 small ones and 9 larger ones. I'll have couple more pictures >> and perhaps a video of this process. The accuracy is almost >> unbelievable if one is careful. These pictures show the assembled >> case (less shelves) waiting for warm day to spray lacquer and a >> little jig for squaring up the parts for pinning with 2 -23 ga pins to >> hold a bundle of four. The bundling makes quick work of cutting >> the fingers on the REVO using the ruler to verify index spacing of >> turning the crank. >> >> [image: Capture1.PNG] [image: Capture.PNG] >> DanK >> >> On Monday, January 8, 2024 at 8:55:52 PM UTC-5 Tim Ziegler wrote: >> >>> Thanks Dan, >>> >>> Very interesting. That's how I envisioned it by what you explained. >>> great job and so glad it's working out like you hoped. >>> Keep me posted in how it goes. It appears to be more meticulous than my >>> Omni Jig however. >>> I still want to do it just so I can say I did. loll >>> >>> Keep up the great work Dan. >>> >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> Ziegler Laser Worx LLC >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> 320-630-2243 <(320)%20630-2243> cell >>> >>> >>> On Mon, Jan 8, 2024 at 4:02 PM cdkr...@gmail.com >>> wrote: >>> >>>> There was interest in how I used the REVO to cut finger joints. So >>>> here are some pictures: >>>> [image: Capture.PNG] [image: Capture4.PNG] >>>> [image: Capture2.PNG] >>>> >>>> [image: Capture3.PNG] >>>> >>>> Using a 1/2" straight bit and the REVO frame ruler to verify >>>> positioning of 4 crank turns for indexing, I cut two joints at a time with >>>> the bundles offset 1/2". Then turn them over and reset for the other two >>>> joints. It works out the best to pin the two sides together and the top >>>> and bottom together in the orientation they will be assembled, then offset >>>> those "bundles" under the clamps. I use the triangle marking system to keep >>>> track of orientation. >>>> >>>> The first clamp setup was very awkward because of clearance issues. So >>>> I reworked the clamping idea using my shop clamp system started and >>>> expanded from Shopsmith.system. The second picture shows it to be much >>>> handier. >>>> >>>> The other pictures show how accurate the results are. I used no backer >>>> board, but you can see that I did score a line where the bit exits. Clean. >>>> >>>> Next up, a whole bunch of drawers. >>>> DanK >>>> >>>> -- >>>> >>> You received this message because you are subscribed to the Google >>>> Groups "Legacy Ornamental Mills" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to legacy-ornamental...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/564d3420-93d4-4835-bf0c-86d068b8800cn%40googlegroups.com >>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/564d3420-93d4-4835-bf0c-86d068b8800cn%40googlegroups.com?utm_medium=email_source=footer> >>>> . >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4e335237-b9d8-4bcd-8da9-749578045dedn%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/4e335237-b9d8-4bcd-8da9-749578045dedn%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFFZapJGbVN2cgzZTxGRBSyHpCnYtBiTPAf4%3DWQULx86A%40mail.gmail.com.
Re: Finger joints on the REVO
Forgot to mention...those slots for the shelves are French dovetail (sliding dovetail) and the mail parts were hand planed with a Stanley 444 dovetail plane. Fun. DanK On Saturday, January 20, 2024 at 5:35:53 PM UTC-5 cdkr...@gmail.com wrote: > Some frustrating dilly dallying around with cheap plywood finally > motivated me to plane some more "junk wood" cherry and make > all the drawers of solid wood. I'll not make that mistake again! > This cuts SO beautifully with no tear out, no backers, no scoring. > I'm working through making 25 little drawers to fit in the case, > 16 small ones and 9 larger ones. I'll have couple more pictures > and perhaps a video of this process. The accuracy is almost > unbelievable if one is careful. These pictures show the assembled > case (less shelves) waiting for warm day to spray lacquer and a > little jig for squaring up the parts for pinning with 2 -23 ga pins to > hold a bundle of four. The bundling makes quick work of cutting > the fingers on the REVO using the ruler to verify index spacing of > turning the crank. > > [image: Capture1.PNG] [image: Capture.PNG] > DanK > > On Monday, January 8, 2024 at 8:55:52 PM UTC-5 Tim Ziegler wrote: > >> Thanks Dan, >> >> Very interesting. That's how I envisioned it by what you explained. >> great job and so glad it's working out like you hoped. >> Keep me posted in how it goes. It appears to be more meticulous than my >> Omni Jig however. >> I still want to do it just so I can say I did. loll >> >> Keep up the great work Dan. >> >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Mon, Jan 8, 2024 at 4:02 PM cdkr...@gmail.com >> wrote: >> >>> There was interest in how I used the REVO to cut finger joints. So here >>> are some pictures: >>> [image: Capture.PNG] [image: Capture4.PNG] >>> [image: Capture2.PNG] >>> >>> [image: Capture3.PNG] >>> >>> Using a 1/2" straight bit and the REVO frame ruler to verify positioning >>> of 4 crank turns for indexing, I cut two joints at a time with the bundles >>> offset 1/2". Then turn them over and reset for the other two joints. It >>> works out the best to pin the two sides together and the top and bottom >>> together in the orientation they will be assembled, then offset those >>> "bundles" under the clamps. I use the triangle marking system to keep track >>> of orientation. >>> >>> The first clamp setup was very awkward because of clearance issues. So >>> I reworked the clamping idea using my shop clamp system started and >>> expanded from Shopsmith.system. The second picture shows it to be much >>> handier. >>> >>> The other pictures show how accurate the results are. I used no backer >>> board, but you can see that I did score a line where the bit exits. Clean. >>> >>> Next up, a whole bunch of drawers. >>> DanK >>> >>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/564d3420-93d4-4835-bf0c-86d068b8800cn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/564d3420-93d4-4835-bf0c-86d068b8800cn%40googlegroups.com?utm_medium=email_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/4e335237-b9d8-4bcd-8da9-749578045dedn%40googlegroups.com.
Re: REVO storage
I will always be a woodworking guy just will not be commercially doing it anymore . (well ok not as much lol) Takes the fun out of it. I have a box I am just finishing now actually with splined mitered corners and the cover is a Curly maple wrap around a walnut center. I may share once its sanded up and finished. See if the spirit moves me to share. lol I do a ton of box jointed boxes and also have the "I Box" by Incra Jig. like I said along with my Omni jig and home made ones I have my bases covered but sure would like to see how fast and efficient the LOM does it. So keep us posted Dan. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Jan 5, 2024 at 8:09 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Good morning everyone. > > Dan I am "NOT" a cabinet maker, (I know Tim is/was...) I really like what > you've done. But your explanation leaves me somewhat confused? (No frame of > reference for me.)( I don't DO BOXES!) ;-) > All that I can say is , Keep up the good work. And Thank you. > > C.A.G. > > On Friday, January 5, 2024 at 06:59:32 AM EST, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Hey Dan, > > Very impressive to hear. The revo is maybe where i will test too. > Great information to know. I will just need to make some more play > time which has been a bit sparse here as of late. > Keep me posted and would love to see some pix of your finished product > and of course you're set up. > More later. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Jan 5, 2024 at 3:09 AM cdkr...@gmail.com > wrote: > > Thanks for the template cutting offer. Not needed yet. > > This will be the second attempt at finger joints, the first having turned > out equal to or better than indexed saw cut ones. Using walnut and a > straight HSS bit, the tear out was far less than the saw and the accuracy > was quite good just using the crank verified by the ruler. Because the > spacing was so accurate, methinks that I can stack cut the sides and > the ends separately. Usually I stack cut ends and sides together with > offset. The current saw setup has severely limited width capacity because > of a power feeder installation that I would have to remove (very heavy). > But the REVO easily reaches 36" with no incremental creep like on some > jigs. > Well, the creep would be the operator. > > The fun part of this has been using FreeCAD to design the case and drawers > parametrically for the exercise of doing it. This means that if I need to > adjust > a dimension that affects other dimensions (which ones don"t?) all I have > to > do is adjust a spreadsheet cell and the model recalculates everything. > It's > really slick. Combine that with exploded part capability, a whole new > world > of planning has opened up. Shop drawings look professional complete with > title blocks! > DanK > On Thursday, January 4, 2024 at 11:07:24 PM UTC-5 Tim Ziegler wrote: > > Hey Dan, > > Super excited to see how the finger jointing comes out. I have been going > to try it for > finger jointing at some point too. But I have the large 24 inch Omni > Jig so I am reluctant to > set up the LOM for it. Just know you're going to need a > sacrificial backup board on the exit side. > Even with Spiral bits I still get some tearout. > Let me know if you need any templates cut on the laser for that or are you > doing the indexing > method? > Either way let me know. > > thanks. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > On Thu, Jan 4, 2024 at 11:20 AM cdkr...@gmail.com > wrote: > > Thank you Curt for reposting the pics. I didn't insert them as > thumbnails, so will that make them adjustable? > > The tube under the router is a 4" dust collection (HVAC) tube hooked up to > a 3 HP Jet cyclone. I suspended the tube on chains (not really visible) so > it can bump the ends of travel without stopping the carriage prematurely. > Combined with the plastic shield you see in front of the router that should > take care of a high percentage of dust collection issues. The connection > to the collector is the flex tube you see, but the flex is currently > connected to a 4" floor wand laying on my material cart behind. Hasn't been > tried
Re: REVO storage
Good morning everyone. Dan I am "NOT" a cabinet maker, (I know Tim is/was...) I really like what you've done. But your explanation leaves me somewhat confused? (No frame of reference for me.)( I don't DO BOXES!) ;-)All that I can say is , Keep up the good work. And Thank you. C.A.G. On Friday, January 5, 2024 at 06:59:32 AM EST, Tim Ziegler wrote: Hey Dan, Very impressive to hear. The revo is maybe where i will test too. Great information to know. I will just need to make some more play time which has been a bit sparse here as of late. Keep me posted and would love to see some pix of your finished product and of course you're set up. More later. Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Fri, Jan 5, 2024 at 3:09 AM cdkr...@gmail.com wrote: Thanks for the template cutting offer. Not needed yet. This will be the second attempt at finger joints, the first having turned out equal to or better than indexed saw cut ones. Using walnut and a straight HSS bit, the tear out was far less than the saw and the accuracy was quite good just using the crank verified by the ruler. Because the spacing was so accurate, methinks that I can stack cut the sides and the ends separately. Usually I stack cut ends and sides together with offset. The current saw setup has severely limited width capacity because of a power feeder installation that I would have to remove (very heavy). But the REVO easily reaches 36" with no incremental creep like on some jigs. Well, the creep would be the operator. The fun part of this has been using FreeCAD to design the case and drawers parametrically for the exercise of doing it. This means that if I need to adjust a dimension that affects other dimensions (which ones don"t?) all I have to do is adjust a spreadsheet cell and the model recalculates everything. It's really slick. Combine that with exploded part capability, a whole new world of planning has opened up. Shop drawings look professional complete withtitle blocks! DanK On Thursday, January 4, 2024 at 11:07:24 PM UTC-5 Tim Ziegler wrote: Hey Dan, Super excited to see how the finger jointing comes out. I have been going to try it for finger jointing at some point too. But I have the large 24 inch Omni Jig so I am reluctant to set up the LOM for it. Just know you're going to need a sacrificial backup board on the exit side. Even with Spiral bits I still get some tearout. Let me know if you need any templates cut on the laser for that or are you doing the indexingmethod? Either way let me know. thanks. Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Thu, Jan 4, 2024 at 11:20 AM cdkr...@gmail.com wrote: Thank you Curt for reposting the pics. I didn't insert them as thumbnails, so will that make them adjustable? The tube under the router is a 4" dust collection (HVAC) tube hooked up to a 3 HP Jet cyclone. I suspended the tube on chains (not really visible) so it can bump the ends of travel without stopping the carriage prematurely. Combined with the plastic shield you see in front of the router that should take care of a high percentage of dust collection issues. The connection to the collector is the flex tube you see, but the flex is currently connected to a 4" floor wand laying on my material cart behind. Hasn't been tried yet, but it's about to get a workout. All the drawers and the container frame for the REVO storage will be finger jointed on the REVO. DanK On Thursday, January 4, 2024 at 9:06:57 AM UTC-5 Curt George wrote: Lets try this Tim. C.A.G. On Thursday, January 4, 2024 at 06:51:12 AM EST, Tim Ziegler wrote: I am not able to open those pictures any bigger then on the page to really see what you have Dan, can you send them in a different format? Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Wed, Jan 3, 2024 at 11:22 PM 'Curt George' via Legacy Ornamental Mills wrote: All Right Dan! I like that storage area for the REVO!Good job. ;-) Bye the way, What is that galvanized ductwork up/under your carriage? (some king of dust control?) C.A.G. On Wednesday, January 3, 2024 at 01:33:12 PM EST, cdkr...@gmail.com wrote: Hi Everyone. So far so good for 2024. (From a joke abouta man who was proving that jumping off a tall building was notfatal.) Here's the REVOstorage board in all it's glory. Made from shop scraps andusing up left over paint. It's completely symmetric so the back sideis available too. The drawer unit shown previously will be nextfor construction and will be nestled into the right side of thestand. It will be show wood, probably walnut. I ha
Re: REVO storage
Hey Dan, Very impressive to hear. The revo is maybe where i will test too. Great information to know. I will just need to make some more play time which has been a bit sparse here as of late. Keep me posted and would love to see some pix of your finished product and of course you're set up. More later. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Jan 5, 2024 at 3:09 AM cdkr...@gmail.com wrote: > Thanks for the template cutting offer. Not needed yet. > > This will be the second attempt at finger joints, the first having turned > out equal to or better than indexed saw cut ones. Using walnut and a > straight HSS bit, the tear out was far less than the saw and the accuracy > was quite good just using the crank verified by the ruler. Because the > spacing was so accurate, methinks that I can stack cut the sides and > the ends separately. Usually I stack cut ends and sides together with > offset. The current saw setup has severely limited width capacity because > of a power feeder installation that I would have to remove (very heavy). > But the REVO easily reaches 36" with no incremental creep like on some > jigs. > Well, the creep would be the operator. > > The fun part of this has been using FreeCAD to design the case and drawers > parametrically for the exercise of doing it. This means that if I need to > adjust > a dimension that affects other dimensions (which ones don"t?) all I have > to > do is adjust a spreadsheet cell and the model recalculates everything. > It's > really slick. Combine that with exploded part capability, a whole new > world > of planning has opened up. Shop drawings look professional complete with > title blocks! > DanK > On Thursday, January 4, 2024 at 11:07:24 PM UTC-5 Tim Ziegler wrote: > >> Hey Dan, >> >> Super excited to see how the finger jointing comes out. I have been going >> to try it for >> finger jointing at some point too. But I have the large 24 inch Omni >> Jig so I am reluctant to >> set up the LOM for it. Just know you're going to need a >> sacrificial backup board on the exit side. >> Even with Spiral bits I still get some tearout. >> Let me know if you need any templates cut on the laser for that or are >> you doing the indexing >> method? >> Either way let me know. >> >> thanks. >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> On Thu, Jan 4, 2024 at 11:20 AM cdkr...@gmail.com >> wrote: >> >>> Thank you Curt for reposting the pics. I didn't insert them as >>> thumbnails, so will that make them adjustable? >>> >>> The tube under the router is a 4" dust collection (HVAC) tube hooked up >>> to a 3 HP Jet cyclone. I suspended the tube on chains (not really visible) >>> so it can bump the ends of travel without stopping the carriage >>> prematurely. Combined with the plastic shield you see in front of the >>> router that should take care of a high percentage of dust collection >>> issues. The connection to the collector is the flex tube you see, but the >>> flex is currently connected to a 4" floor wand laying on my material cart >>> behind. Hasn't been tried yet, but it's about to get a workout. All the >>> drawers and the container frame for the REVO storage will be finger jointed >>> on the REVO. >>> DanK >>> >>> >>> On Thursday, January 4, 2024 at 9:06:57 AM UTC-5 Curt George wrote: >>> >>>> Lets try this Tim. >>>> >>>> C.A.G. >>>> >>>> On Thursday, January 4, 2024 at 06:51:12 AM EST, Tim Ziegler < >>>> timjz...@gmail.com> wrote: >>>> >>>> >>>> I am not able to open those pictures any bigger then on the page to >>>> really see what you have >>>> Dan, can you send them in a different format? >>>> >>>> Kind Regards, >>>> >>>> Timothy J. Ziegler >>>> Ziegler WoodWork & Specialty >>>> Ziegler Laser Worx LLC >>>> 14171 160th Ave. >>>> Foreston MN 56330 >>>> >>>> 320-294-5798 <(320)%20294-5798> shop >>>> 320-630-2243 <(320)%20630-2243> cell >>>> >>>> >>>> On Wed, J
Re: REVO storage
Thanks for the template cutting offer. Not needed yet. This will be the second attempt at finger joints, the first having turned out equal to or better than indexed saw cut ones. Using walnut and a straight HSS bit, the tear out was far less than the saw and the accuracy was quite good just using the crank verified by the ruler. Because the spacing was so accurate, methinks that I can stack cut the sides and the ends separately. Usually I stack cut ends and sides together with offset. The current saw setup has severely limited width capacity because of a power feeder installation that I would have to remove (very heavy). But the REVO easily reaches 36" with no incremental creep like on some jigs. Well, the creep would be the operator. The fun part of this has been using FreeCAD to design the case and drawers parametrically for the exercise of doing it. This means that if I need to adjust a dimension that affects other dimensions (which ones don"t?) all I have to do is adjust a spreadsheet cell and the model recalculates everything. It's really slick. Combine that with exploded part capability, a whole new world of planning has opened up. Shop drawings look professional complete with title blocks! DanK On Thursday, January 4, 2024 at 11:07:24 PM UTC-5 Tim Ziegler wrote: > Hey Dan, > > Super excited to see how the finger jointing comes out. I have been going > to try it for > finger jointing at some point too. But I have the large 24 inch Omni > Jig so I am reluctant to > set up the LOM for it. Just know you're going to need a > sacrificial backup board on the exit side. > Even with Spiral bits I still get some tearout. > Let me know if you need any templates cut on the laser for that or are you > doing the indexing > method? > Either way let me know. > > thanks. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > On Thu, Jan 4, 2024 at 11:20 AM cdkr...@gmail.com > wrote: > >> Thank you Curt for reposting the pics. I didn't insert them as >> thumbnails, so will that make them adjustable? >> >> The tube under the router is a 4" dust collection (HVAC) tube hooked up >> to a 3 HP Jet cyclone. I suspended the tube on chains (not really visible) >> so it can bump the ends of travel without stopping the carriage >> prematurely. Combined with the plastic shield you see in front of the >> router that should take care of a high percentage of dust collection >> issues. The connection to the collector is the flex tube you see, but the >> flex is currently connected to a 4" floor wand laying on my material cart >> behind. Hasn't been tried yet, but it's about to get a workout. All the >> drawers and the container frame for the REVO storage will be finger jointed >> on the REVO. >> DanK >> >> >> On Thursday, January 4, 2024 at 9:06:57 AM UTC-5 Curt George wrote: >> >>> Lets try this Tim. >>> >>> C.A.G. >>> >>> On Thursday, January 4, 2024 at 06:51:12 AM EST, Tim Ziegler < >>> timjz...@gmail.com> wrote: >>> >>> >>> I am not able to open those pictures any bigger then on the page to >>> really see what you have >>> Dan, can you send them in a different format? >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> Ziegler Laser Worx LLC >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> 320-630-2243 <(320)%20630-2243> cell >>> >>> >>> On Wed, Jan 3, 2024 at 11:22 PM 'Curt George' via Legacy Ornamental >>> Mills wrote: >>> >>> All Right Dan! I like that storage area for the REVO! >>> Good job. ;-) >>> >>> Bye the way, What is that galvanized ductwork up/under your carriage? >>> (some king of dust control?) >>> >>> C.A.G. >>> >>> On Wednesday, January 3, 2024 at 01:33:12 PM EST, cdkr...@gmail.com < >>> cdkr...@gmail.com> wrote: >>> >>> >>> Hi Everyone. So far so good for 2024. (From a joke about a man who was >>> proving that jumping off a tall building was not fatal.) >>> >>> >>> Here's the REVO storage board in all it's glory. Made from shop scraps >>> and using up left over paint. It's completely symmetric so the back side is >>> availabl
Re: REVO storage
Hey Dan, Super excited to see how the finger jointing comes out. I have been going to try it for finger jointing at some point too. But I have the large 24 inch Omni Jig so I am reluctant to set up the LOM for it. Just know you're going to need a sacrificial backup board on the exit side. Even with Spiral bits I still get some tearout. Let me know if you need any templates cut on the laser for that or are you doing the indexing method? Either way let me know. thanks. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Thu, Jan 4, 2024 at 11:20 AM cdkr...@gmail.com wrote: > Thank you Curt for reposting the pics. I didn't insert them as > thumbnails, so will that make them adjustable? > > The tube under the router is a 4" dust collection (HVAC) tube hooked up to > a 3 HP Jet cyclone. I suspended the tube on chains (not really visible) so > it can bump the ends of travel without stopping the carriage prematurely. > Combined with the plastic shield you see in front of the router that should > take care of a high percentage of dust collection issues. The connection > to the collector is the flex tube you see, but the flex is currently > connected to a 4" floor wand laying on my material cart behind. Hasn't been > tried yet, but it's about to get a workout. All the drawers and the > container frame for the REVO storage will be finger jointed on the REVO. > DanK > > > On Thursday, January 4, 2024 at 9:06:57 AM UTC-5 Curt George wrote: > >> Lets try this Tim. >> >> C.A.G. >> >> On Thursday, January 4, 2024 at 06:51:12 AM EST, Tim Ziegler < >> timjz...@gmail.com> wrote: >> >> >> I am not able to open those pictures any bigger then on the page to >> really see what you have >> Dan, can you send them in a different format? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> Ziegler Laser Worx LLC >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> >> On Wed, Jan 3, 2024 at 11:22 PM 'Curt George' via Legacy Ornamental Mills >> wrote: >> >> All Right Dan! I like that storage area for the REVO! >> Good job. ;-) >> >> Bye the way, What is that galvanized ductwork up/under your carriage? >> (some king of dust control?) >> >> C.A.G. >> >> On Wednesday, January 3, 2024 at 01:33:12 PM EST, cdkr...@gmail.com < >> cdkr...@gmail.com> wrote: >> >> >> Hi Everyone. So far so good for 2024. (From a joke about a man who was >> proving that jumping off a tall building was not fatal.) >> >> >> Here's the REVO storage board in all it's glory. Made from shop scraps >> and using up left over paint. It's completely symmetric so the back side is >> available too. The drawer unit shown previously will be next for >> construction and will be nestled into the right side of the stand. It will >> be show wood, probably walnut. I have a stash on reserve for other >> woodworking tills, so I'll look for other if there's not enough to go >> around. It was a good exercise in hand tools. >> >> [image: Stanley46InUse.PNG] [image: REVOwBackboard.PNG] >> >> DanK >> >> >> >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/d555a578-7b4c-4cc4-8e6e-34d87524933fn%40googlegroups.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/d555a578-7b4c-4cc4-8e6e-34d87524933fn%40googlegroups.com?utm_medium=email_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/1458419476.4602686.1704345728262%40mail.yahoo.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1458419476.4602686.1704345728262%40mail.yahoo.com?utm_medium=email_source=footer> >> . >> >> -- >> You rece
Re: REVO storage
Thank you Curt for reposting the pics. I didn't insert them as thumbnails, so will that make them adjustable? The tube under the router is a 4" dust collection (HVAC) tube hooked up to a 3 HP Jet cyclone. I suspended the tube on chains (not really visible) so it can bump the ends of travel without stopping the carriage prematurely. Combined with the plastic shield you see in front of the router that should take care of a high percentage of dust collection issues. The connection to the collector is the flex tube you see, but the flex is currently connected to a 4" floor wand laying on my material cart behind. Hasn't been tried yet, but it's about to get a workout. All the drawers and the container frame for the REVO storage will be finger jointed on the REVO. DanK On Thursday, January 4, 2024 at 9:06:57 AM UTC-5 Curt George wrote: > Lets try this Tim. > > C.A.G. > > On Thursday, January 4, 2024 at 06:51:12 AM EST, Tim Ziegler < > timjz...@gmail.com> wrote: > > > I am not able to open those pictures any bigger then on the page to really > see what you have > Dan, can you send them in a different format? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Wed, Jan 3, 2024 at 11:22 PM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > All Right Dan! I like that storage area for the REVO! > Good job. ;-) > > Bye the way, What is that galvanized ductwork up/under your carriage? > (some king of dust control?) > > C.A.G. > > On Wednesday, January 3, 2024 at 01:33:12 PM EST, cdkr...@gmail.com < > cdkr...@gmail.com> wrote: > > > Hi Everyone. So far so good for 2024. (From a joke about a man who was > proving that jumping off a tall building was not fatal.) > > > Here's the REVO storage board in all it's glory. Made from shop scraps > and using up left over paint. It's completely symmetric so the back side is > available too. The drawer unit shown previously will be next for > construction and will be nestled into the right side of the stand. It will > be show wood, probably walnut. I have a stash on reserve for other > woodworking tills, so I'll look for other if there's not enough to go > around. It was a good exercise in hand tools. > > [image: Stanley46InUse.PNG] [image: REVOwBackboard.PNG] > > DanK > > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/d555a578-7b4c-4cc4-8e6e-34d87524933fn%40googlegroups.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/d555a578-7b4c-4cc4-8e6e-34d87524933fn%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1458419476.4602686.1704345728262%40mail.yahoo.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1458419476.4602686.1704345728262%40mail.yahoo.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGWM%2BqBErJ5kdMgsjCzAz-a8VptiWYGQJ56KWTtwFE7eQ%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGWM%2BqBErJ5kdMgsjCzAz-a8VptiWYGQJ56KWTtwFE7eQ%40mail.gmail.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6a2aa506-e673-454d-9214-ba7cb130d616n%40googlegroups.com.
Re: Small REVO mod
Must be what they did on mine too? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Oct 7, 2023 at 4:20 PM wrote: > On mine You could shape the outside of the live centre any shape,size or > length you like for router clearance > > Just like you can buy all shapes and sizes live centres for your lathe > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *cdkr...@gmail.com > *Sent:* Sunday, October 8, 2023 2:17 AM > *To:* Legacy Ornamental Mills > *Subject:* Re: Small REVO mod > > > > Bill, I never thought about a slip on gadget for live center. > > Good call. I'm thinking I'll have to watch cutter clearance > > a great deal closer, but that should be default. Right? > > DanK > > On Friday, October 6, 2023 at 11:23:29 PM UTC-4 Tim Ziegler wrote: > > looks pretty straight forward. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > Ziegler Laser Worx LLC > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > > > > > On Fri, Oct 6, 2023 at 8:24 PM wrote: > > Nice mod dan live centres are always better here is how I did it > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *cdkr...@gmail.com > *Sent:* Saturday, October 7, 2023 2:33 AM > *To:* Legacy Ornamental Mills > *Subject:* Small REVO mod > > > > After breaking a tooth off an acrylic gear, it motivated me to modify the > tail stock center from a friction center to a ball bearing center. By > turning and threading a 1/2" - 20 stub on the original shaft after cutting > the point off, I made the points interchangeable. I also noticed a great > increase in friction with the addition of a steady rest. > > > > Lesson learned while doing it. Don't use cheap tools for "precision" > work. The die I grabbed first was from an old cheap set that belonged in a > kids toolbox or trash bin. The new die worked a charm, but I lost almost > 1/4" of shaft before switching. GRRR! > > > > And, don't get me wrong guys, I know that acrylic is not ideal for gears > OR sprockets, but it's what I have. I know from experience about dropping > it on a concrete floor. > > > > And now I'm gonna try some wooden things. > > > > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy
RE: Small REVO mod
On mine You could shape the outside of the live centre any shape,size or length you like for router clearance Just like you can buy all shapes and sizes live centres for your lathe Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of cdkr...@gmail.com Sent: Sunday, October 8, 2023 2:17 AM To: Legacy Ornamental Mills Subject: Re: Small REVO mod Bill, I never thought about a slip on gadget for live center. Good call. I'm thinking I'll have to watch cutter clearance a great deal closer, but that should be default. Right? DanK On Friday, October 6, 2023 at 11:23:29 PM UTC-4 Tim Ziegler wrote: looks pretty straight forward. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Oct 6, 2023 at 8:24 PM mailto:bulk...@mmnet.com.au> > wrote: Nice mod dan live centres are always better here is how I did it Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of cdkr...@gmail.com <mailto:cdkr...@gmail.com> Sent: Saturday, October 7, 2023 2:33 AM To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> > Subject: Small REVO mod After breaking a tooth off an acrylic gear, it motivated me to modify the tail stock center from a friction center to a ball bearing center. By turning and threading a 1/2" - 20 stub on the original shaft after cutting the point off, I made the points interchangeable. I also noticed a great increase in friction with the addition of a steady rest. Lesson learned while doing it. Don't use cheap tools for "precision" work. The die I grabbed first was from an old cheap set that belonged in a kids toolbox or trash bin. The new die worked a charm, but I lost almost 1/4" of shaft before switching. GRRR! And, don't get me wrong guys, I know that acrylic is not ideal for gears OR sprockets, but it's what I have. I know from experience about dropping it on a concrete floor. And now I'm gonna try some wooden things. DanK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d9f964%2411fb7bc0%2435f27340%24%40mmnet.com.au.
Re: Small REVO mod
mine was pointed though just like the actual tailstock center. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Oct 7, 2023 at 1:09 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Dan > In our archives Tim K. made a plastic (dunlin) free floating live center > for one of his mills. > On my 200 I used an old live center, un-screwed the MT2 shaft from the end > of the L.C. and screwed it onto my tail rest bracket with a 1/2-24 screw, > to give my 200 a live center. > Here is the link form our archives, > https://ornamentalmills.com/tips/live_tailstock/index.html It has > Bill's, and Tim's version +, as well as photo's of the Old Legacy tailstock > broken down. > > I am also adding two photo's of my live center on the 200. > > Have a Great weekend. > > C.A.G. > > > > > On Saturday, October 7, 2023 at 11:16:34 AM EDT, cdkr...@gmail.com < > cdkra...@gmail.com> wrote: > > > Bill, I never thought about a slip on gadget for live center. > Good call. I'm thinking I'll have to watch cutter clearance > a great deal closer, but that should be default. Right? > DanK > On Friday, October 6, 2023 at 11:23:29 PM UTC-4 Tim Ziegler wrote: > > looks pretty straight forward. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Oct 6, 2023 at 8:24 PM wrote: > > Nice mod dan live centres are always better here is how I did it > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *cdkr...@gmail.com > *Sent:* Saturday, October 7, 2023 2:33 AM > *To:* Legacy Ornamental Mills > *Subject:* Small REVO mod > > > > After breaking a tooth off an acrylic gear, it motivated me to modify the > tail stock center from a friction center to a ball bearing center. By > turning and threading a 1/2" - 20 stub on the original shaft after cutting > the point off, I made the points interchangeable. I also noticed a great > increase in friction with the addition of a steady rest. > > > > Lesson learned while doing it. Don't use cheap tools for "precision" > work. The die I grabbed first was from an old cheap set that belonged in a > kids toolbox or trash bin. The new die worked a charm, but I lost almost > 1/4" of shaft before switching. GRRR! > > > > And, don't get me wrong guys, I know that acrylic is not ideal for gears > OR sprockets, but it's what I have. I know from experience about dropping > it on a concrete floor. > > > > And now I'm gonna try some wooden things. > > > > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills&q
Re: Small REVO mod
One of my machines came with a Delrin tailstock center too, someone must have made a few? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Oct 7, 2023 at 1:09 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Dan > In our archives Tim K. made a plastic (dunlin) free floating live center > for one of his mills. > On my 200 I used an old live center, un-screwed the MT2 shaft from the end > of the L.C. and screwed it onto my tail rest bracket with a 1/2-24 screw, > to give my 200 a live center. > Here is the link form our archives, > https://ornamentalmills.com/tips/live_tailstock/index.html It has > Bill's, and Tim's version +, as well as photo's of the Old Legacy tailstock > broken down. > > I am also adding two photo's of my live center on the 200. > > Have a Great weekend. > > C.A.G. > > > > > On Saturday, October 7, 2023 at 11:16:34 AM EDT, cdkr...@gmail.com < > cdkra...@gmail.com> wrote: > > > Bill, I never thought about a slip on gadget for live center. > Good call. I'm thinking I'll have to watch cutter clearance > a great deal closer, but that should be default. Right? > DanK > On Friday, October 6, 2023 at 11:23:29 PM UTC-4 Tim Ziegler wrote: > > looks pretty straight forward. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Oct 6, 2023 at 8:24 PM wrote: > > Nice mod dan live centres are always better here is how I did it > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *cdkr...@gmail.com > *Sent:* Saturday, October 7, 2023 2:33 AM > *To:* Legacy Ornamental Mills > *Subject:* Small REVO mod > > > > After breaking a tooth off an acrylic gear, it motivated me to modify the > tail stock center from a friction center to a ball bearing center. By > turning and threading a 1/2" - 20 stub on the original shaft after cutting > the point off, I made the points interchangeable. I also noticed a great > increase in friction with the addition of a steady rest. > > > > Lesson learned while doing it. Don't use cheap tools for "precision" > work. The die I grabbed first was from an old cheap set that belonged in a > kids toolbox or trash bin. The new die worked a charm, but I lost almost > 1/4" of shaft before switching. GRRR! > > > > And, don't get me wrong guys, I know that acrylic is not ideal for gears > OR sprockets, but it's what I have. I know from experience about dropping > it on a concrete floor. > > > > And now I'm gonna try some wooden things. > > > > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "
Re: Small REVO mod
Wow. Lot's of ideas have been used, each filling a specific need. I like the space saving feature of your live center, Curt. DanK On Saturday, October 7, 2023 at 2:09:09 PM UTC-4 Curt George wrote: > Dan > In our archives Tim K. made a plastic (dunlin) free floating live center > for one of his mills. > On my 200 I used an old live center, un-screwed the MT2 shaft from the end > of the L.C. and screwed it onto my tail rest bracket with a 1/2-24 screw, > to give my 200 a live center. > Here is the link form our archives, > https://ornamentalmills.com/tips/live_tailstock/index.html It has > Bill's, and Tim's version +, as well as photo's of the Old Legacy tailstock > broken down. > > I am also adding two photo's of my live center on the 200. > > Have a Great weekend. > > C.A.G. > > > > > On Saturday, October 7, 2023 at 11:16:34 AM EDT, cdkr...@gmail.com < > cdkr...@gmail.com> wrote: > > > Bill, I never thought about a slip on gadget for live center. > Good call. I'm thinking I'll have to watch cutter clearance > a great deal closer, but that should be default. Right? > DanK > On Friday, October 6, 2023 at 11:23:29 PM UTC-4 Tim Ziegler wrote: > > looks pretty straight forward. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Oct 6, 2023 at 8:24 PM wrote: > > Nice mod dan live centres are always better here is how I did it > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *cdkr...@gmail.com > *Sent:* Saturday, October 7, 2023 2:33 AM > *To:* Legacy Ornamental Mills > *Subject:* Small REVO mod > > > > After breaking a tooth off an acrylic gear, it motivated me to modify the > tail stock center from a friction center to a ball bearing center. By > turning and threading a 1/2" - 20 stub on the original shaft after cutting > the point off, I made the points interchangeable. I also noticed a great > increase in friction with the addition of a steady rest. > > > > Lesson learned while doing it. Don't use cheap tools for "precision" > work. The die I grabbed first was from an old cheap set that belonged in a > kids toolbox or trash bin. The new die worked a charm, but I lost almost > 1/4" of shaft before switching. GRRR! > > > > And, don't get me wrong guys, I know that acrylic is not ideal for gears > OR sprockets, but it's what I have. I know from experience about dropping > it on a concrete floor. > > > > And now I'm gonna try some wooden things. > > > > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/c536eaf9-7bf3-4883-a08c-107a908cf099n%40googlegroups.com.
Re: Small REVO mod
Bill, I never thought about a slip on gadget for live center. Good call. I'm thinking I'll have to watch cutter clearance a great deal closer, but that should be default. Right? DanK On Friday, October 6, 2023 at 11:23:29 PM UTC-4 Tim Ziegler wrote: > looks pretty straight forward. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Fri, Oct 6, 2023 at 8:24 PM wrote: > >> Nice mod dan live centres are always better here is how I did it >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com >> *On Behalf Of *cdkr...@gmail.com >> *Sent:* Saturday, October 7, 2023 2:33 AM >> *To:* Legacy Ornamental Mills >> *Subject:* Small REVO mod >> >> >> >> After breaking a tooth off an acrylic gear, it motivated me to modify the >> tail stock center from a friction center to a ball bearing center. By >> turning and threading a 1/2" - 20 stub on the original shaft after cutting >> the point off, I made the points interchangeable. I also noticed a great >> increase in friction with the addition of a steady rest. >> >> >> >> Lesson learned while doing it. Don't use cheap tools for "precision" >> work. The die I grabbed first was from an old cheap set that belonged in a >> kids toolbox or trash bin. The new die worked a charm, but I lost almost >> 1/4" of shaft before switching. GRRR! >> >> >> >> And, don't get me wrong guys, I know that acrylic is not ideal for gears >> OR sprockets, but it's what I have. I know from experience about dropping >> it on a concrete floor. >> >> >> >> And now I'm gonna try some wooden things. >> >> >> >> DanK >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com?utm_medium=email_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au?utm_medium=email_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/86d62875-350d-4dcb-9362-0f55d75b4300n%40googlegroups.com.
Re: Small REVO mod
looks pretty straight forward. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Oct 6, 2023 at 8:24 PM wrote: > Nice mod dan live centres are always better here is how I did it > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *cdkr...@gmail.com > *Sent:* Saturday, October 7, 2023 2:33 AM > *To:* Legacy Ornamental Mills > *Subject:* Small REVO mod > > > > After breaking a tooth off an acrylic gear, it motivated me to modify the > tail stock center from a friction center to a ball bearing center. By > turning and threading a 1/2" - 20 stub on the original shaft after cutting > the point off, I made the points interchangeable. I also noticed a great > increase in friction with the addition of a steady rest. > > > > Lesson learned while doing it. Don't use cheap tools for "precision" > work. The die I grabbed first was from an old cheap set that belonged in a > kids toolbox or trash bin. The new die worked a charm, but I lost almost > 1/4" of shaft before switching. GRRR! > > > > And, don't get me wrong guys, I know that acrylic is not ideal for gears > OR sprockets, but it's what I have. I know from experience about dropping > it on a concrete floor. > > > > And now I'm gonna try some wooden things. > > > > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d9f8bc%24eefc6a00%24ccf53e00%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHmwbQFD%3DAWNmLtf5VL7_upNJC8UJ2hEmiN2cHd6t2sug%40mail.gmail.com.
Small REVO mod
After breaking a tooth off an acrylic gear, it motivated me to modify the tail stock center from a friction center to a ball bearing center. By turning and threading a 1/2" - 20 stub on the original shaft after cutting the point off, I made the points interchangeable. I also noticed a great increase in friction with the addition of a steady rest. Lesson learned while doing it. Don't use cheap tools for "precision" work. The die I grabbed first was from an old cheap set that belonged in a kids toolbox or trash bin. The new die worked a charm, but I lost almost 1/4" of shaft before switching. GRRR! And, don't get me wrong guys, I know that acrylic is not ideal for gears OR sprockets, but it's what I have. I know from experience about dropping it on a concrete floor. And now I'm gonna try some wooden things. [image: LiveCenterMod.JPG] DanK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/b58b3e9a-3c03-4db3-9b3b-73022a62c3f1n%40googlegroups.com.
RE: REVO Mods
Ok as long as it all works for you Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of cdkr...@gmail.com Sent: Friday, September 8, 2023 10:34 AM To: Legacy Ornamental Mills Subject: Re: REVO Mods The little one does, but the big one does not fit under the ways. I noted that in the text with the pictures. That's why I mounted the little chuck. DanK On Thursday, September 7, 2023 at 6:31:22 PM UTC-4 bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> wrote: That chuck looks like it suits your needs but does it fit under the revos cross slide rails It looks in the pic like it doesn’t Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of cdkr...@gmail.com <mailto:cdkr...@gmail.com> Sent: Friday, September 8, 2023 7:19 AM To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> > Subject: REVO Mods I've made an adapter to mount my Nova chuck on the headstock spindle. Yes, they can be bought, but I had the metal, the time, interest, and the machine to make it happen. Then realized the chuck was too big to allow the router frame to travel over it for small diameter stuff. So I found the small chuck and made a spur for it. I may have to make the spur larger because it seems a little sloppy. Then I got ambitious and modified the tail stock. While roping some candlesticks recently, I noted that small differences in the length of the work pieces were distorting both the headstock and tailstock brackets on the longer pieces. This affected the position of the workpiece, which is a no-no for ornamenting. So I cut the tail stock spindle short, drilled it out and inserted a strong compression spring and then the plunger so that the compression spring allows enough give to lock the handle but not distort the brackets. Perfect. (Note: the new compression spring is internal and can't be seen.) And I looked for gear plate stock in my stuff and haven't found any. So the next up is to seek sources for the custom duplex gear I want for the hand plane restoration work. <https://groups.google.com/group/legacy-ornamental-mills/attach/2ffc34c55854c/image001.jpg?part=0.1> <https://groups.google.com/group/legacy-ornamental-mills/attach/2ffc34c55854c/image002.jpg?part=0.2> <https://groups.google.com/group/legacy-ornamental-mills/attach/2ffc34c55854c/image003.jpg?part=0.3> DanK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/219ed891-8651-4ddb-98a9-5e408c90b3e7n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/219ed891-8651-4ddb-98a9-5e408c90b3e7n%40googlegroups.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/152efd4f-e74f-4539-822f-802297296d80n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/152efd4f-e74f-4539-822f-802297296d80n%40googlegroups.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/005f01d9e1ec%24c66e0210%24534a0630%24%40mmnet.com.au.
Re: REVO Mods
The little one does, but the big one does not fit under the ways. I noted that in the text with the pictures. That's why I mounted the little chuck. DanK On Thursday, September 7, 2023 at 6:31:22 PM UTC-4 bulk...@mmnet.com.au wrote: > That chuck looks like it suits your needs but does it fit under the revos > cross slide rails It looks in the pic like it doesn’t > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *cdkr...@gmail.com > *Sent:* Friday, September 8, 2023 7:19 AM > *To:* Legacy Ornamental Mills > *Subject:* REVO Mods > > > > I've made an adapter to mount my Nova chuck on the headstock spindle. > Yes, they can be bought, but I had the metal, the time, interest, and the > machine to make it happen. Then realized the chuck was too big to allow > the router frame to travel over it for small diameter stuff. So I found > the small chuck and made a spur for it. I may have to make the spur larger > because it seems a little sloppy. > > > > Then I got ambitious and modified the tail stock. While roping some > candlesticks recently, I noted that small differences in the length of the > work pieces were distorting both the headstock and tailstock brackets on > the longer pieces. This affected the position of the workpiece, which is a > no-no for ornamenting. So I cut the tail stock spindle short, drilled it > out and inserted a strong compression spring and then the plunger so that > the compression spring allows enough give to lock the handle but not > distort the brackets. Perfect. (Note: the new compression spring is > internal and can't be seen.) > > > > And I looked for gear plate stock in my stuff and haven't found any. So > the next up is to seek sources for the custom duplex gear I want for the > hand plane restoration work. > > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/219ed891-8651-4ddb-98a9-5e408c90b3e7n%40googlegroups.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/219ed891-8651-4ddb-98a9-5e408c90b3e7n%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/152efd4f-e74f-4539-822f-802297296d80n%40googlegroups.com.
Re: Shoe Horn Handle on the REVO
Nice Job Tim Jeff from Connecticut Sent from my iPhoneOn Jun 17, 2023, at 2:25 PM, Tim Ziegler wrote:Hey Curt, you'd asked about the Router I was using on my REVO, here it is, Mac, and any exotic wood guru, I also attached a few pic's of the wood species I used. in the raw so one can get a better look at it.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler <timjzieg...@gmail.com> wrote:Good evening,Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGtuu7j_eu1%2BOqe92SCe%2BJrs78ZuJTi0R19vnMK-PrGrA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/3E76B9F2-F77C-4FEF-8378-30AB2699F213%40gmail.com.
Re: Shoe Horn Handle on the REVO
Nice! Thank you. C.A.G. On Saturday, June 17, 2023 at 02:25:55 PM EDT, Tim Ziegler wrote: Hey Curt, you'd asked about the Router I was using on my REVO, here it is, Mac, and any exotic wood guru, I also attached a few pic's of the wood species I used. in the raw so one can get a better look at it. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote: Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGtuu7j_eu1%2BOqe92SCe%2BJrs78ZuJTi0R19vnMK-PrGrA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1707640309.696579.1687041492282%40mail.yahoo.com.
Re: Shoe Horn Handle on the REVO
Hey Bill & all, So the finished diameter is 5/8 on the tapered end and the large end is 7/8. The original size of my blank was about 1 1/8, I milled it down to about 1 inch then proceeded to run the taper. >From there I did all the pretty stuff. 12 flutes and 6 starts on the spiral or (rope) Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Jun 16, 2023 at 12:59 AM wrote: > Another question I’m not sure if it was asked how many flutes? and what > dia was the blank? > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Friday, June 16, 2023 12:54 PM > *To:* LOM Group ; Tim Ziegler < > timjzieg...@gmail.com> > *Subject:* Re: Shoe Horn Handle on the REVO > > > > So I was asked today what bits I used on my shoe horn handle so I have > attached the two I used to do the > > rope, and the flutes. > > Magnate still makes these bits if anyone is interested. > > I am still contemplating the species of wood, though Mac has been a great > help, I did not buy > > much exotic wood until the last couple of years. > > It could be a piece of GRANADILLO. Scientific Name:* Platymiscium* spp. > Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood, > Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America > down to the Brazilian Amazon region. > > *I have ordered that in a fairly large quantity so.?* > > *Now I am not saying it is, as Mac showed some TEAK that really looked > close and has* > > *less pronounced grain, which is what the handle looks like. * > > *Maybe a picture of the wood in the square will help lol. * > > *Stay tuned for the mystery wood.* > > > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote: > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/01d9a017%24bb7db510%2432791f30%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/01d9a017%24bb7db510%2432791f30%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH2UoyNNYaKt5rFxFFx9_LsmR4kgBO%2ByLQUY_Lgq%2BtUaA%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
thanks Curt. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Thu, Jun 15, 2023 at 11:06 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hey there Tim > > Thanks for the note on the router bits. choosing the right bit profile and > the pitch all really matter when working with small spindles. using the > wrong bit and or pitch will throw off the look of any job. > I still say, you Hit a home run on this project. Good for you! > > Have a good night. > > C.A.G. > > On Thursday, June 15, 2023 at 10:54:07 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > So I was asked today what bits I used on my shoe horn handle so I have > attached the two I used to do the > rope, and the flutes. > Magnate still makes these bits if anyone is interested. > I am still contemplating the species of wood, though Mac has been a great > help, I did not buy > much exotic wood until the last couple of years. > It could be a piece of GRANADILLO. Scientific Name: Platymiscium spp. > Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood, > Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America > down to the Brazilian Amazon region. > *I have ordered that in a fairly large quantity so.?* > *Now I am not saying it is, as Mac showed some TEAK that really looked > close and has* > *less pronounced grain, which is what the handle looks like. * > *Maybe a picture of the wood in the square will help lol. * > *Stay tuned for the mystery wood.* > > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote: > > Good evening, > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > So I turned this on my REVO. > 6 start 3/8 pitch spiral. about 9.5 inches long. > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > Fun little project that will serve me well. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/877957623.406168.1686888392230%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/877957623.406168.1686888392230%40mail.yahoo.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF3qoGmYk3CX3eS50%2BgCM7SO%3DztwQcjsGEvYAT0C9pUzA%40mail.gmail.com.
RE: Shoe Horn Handle on the REVO
Another question I’m not sure if it was asked how many flutes? and what dia was the blank? Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Friday, June 16, 2023 12:54 PM To: LOM Group ; Tim Ziegler Subject: Re: Shoe Horn Handle on the REVO So I was asked today what bits I used on my shoe horn handle so I have attached the two I used to do the rope, and the flutes. Magnate still makes these bits if anyone is interested. I am still contemplating the species of wood, though Mac has been a great help, I did not buy much exotic wood until the last couple of years. It could be a piece of GRANADILLO. Scientific Name: Platymiscium spp. Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood, Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America down to the Brazilian Amazon region. I have ordered that in a fairly large quantity so.? Now I am not saying it is, as Mac showed some TEAK that really looked close and has less pronounced grain, which is what the handle looks like. Maybe a picture of the wood in the square will help lol. Stay tuned for the mystery wood. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote: Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/01d9a017%24bb7db510%2432791f30%24%40mmnet.com.au.
Re: Shoe Horn Handle on the REVO
Hey there Tim Thanks for the note on the router bits. choosing the right bit profile and the pitch all really matter when working with small spindles. using the wrong bit and or pitch will throw off the look of any job.I still say, you Hit a home run on this project. Good for you! Have a good night. C.A.G. On Thursday, June 15, 2023 at 10:54:07 PM EDT, Tim Ziegler wrote: So I was asked today what bits I used on my shoe horn handle so I have attached the two I used to do the rope, and the flutes. Magnate still makes these bits if anyone is interested. I am still contemplating the species of wood, though Mac has been a great help, I did not buymuch exotic wood until the last couple of years. It could be a piece of GRANADILLO. Scientific Name: Platymiscium spp. Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood, Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America down to the Brazilian Amazon region.I have ordered that in a fairly large quantity so.?Now I am not saying it is, as Mac showed some TEAK that really looked close and hasless pronounced grain, which is what the handle looks like. Maybe a picture of the wood in the square will help lol. Stay tuned for the mystery wood. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote: Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/877957623.406168.1686888392230%40mail.yahoo.com.
Re: Shoe Horn Handle on the REVO
So I was asked today what bits I used on my shoe horn handle so I have attached the two I used to do the rope, and the flutes. Magnate still makes these bits if anyone is interested. I am still contemplating the species of wood, though Mac has been a great help, I did not buy much exotic wood until the last couple of years. It could be a piece of GRANADILLO. Scientific Name: Platymiscium spp. Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood, Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America down to the Brazilian Amazon region. *I have ordered that in a fairly large quantity so.?* *Now I am not saying it is, as Mac showed some TEAK that really looked close and has* *less pronounced grain, which is what the handle looks like. * *Maybe a picture of the wood in the square will help lol. * *Stay tuned for the mystery wood.* Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote: > Good evening, > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > So I turned this on my REVO. > 6 start 3/8 pitch spiral. about 9.5 inches long. > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > Fun little project that will serve me well. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
I just can't recall ever buying anything like that. But one never knows lol. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Wed, Jun 14, 2023 at 12:18 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hey MAC > > I think you are right. Hard, dense wood, radish heugh. > Jatoba - AKA "Brazilian Cherry" looks like it fits the bill. ;-) > > Good call. > > C.A.G. > > On Wednesday, June 14, 2023 at 01:14:01 AM EDT, M.W.Foscue < > mwfos...@earthlink.net> wrote: > > > Tim, > > > > One more possibility (probability): > > Jatoba - AKA "Brazilian Cherry" > > > > Check it out. > > Mac > -- > -- > > -Original Message- > From: > Sent: Jun 13, 2023 2:23 PM > To: > Subject: Re: Shoe Horn Handle on the REVO > > > Well of them 3 it really looks like this. > I just have to remember if I would have done a job with that species. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > On Tue, Jun 13, 2023 at 6:13 AM wrote: > > https://www.wood-database.com/cumaru/ > > https://www.wood-database.com/african-padauk/ > > https://www.wood-database.com/peruvian-walnut/ > > > > here you go Tim > -- > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:51 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Thanks Mac, > > > > I am actually still trying to decide what species it is. I don't recall > any of those species you mentioned. > > But I will be looking it up. Just happened to be the exact size I was > looking for and was a very dense and > > hard wood that seemed it would take the everyday use of a shoe horn. > > Stay tuned. > > > Kind Regards, > > > > Timothy J. Ziegler > -- > -- > On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue > wrote: > > Tim, > > > > Very nice - thanks for sharing. > > The pics are low res. - so a bit difficult deciding the wood type. But a > couple guesses are: > > Peruvian Walnut? > > Paduk? > > Cumaru? > > > > Cheers! > > Mac > -- > -- > > -Original Message- > From: > Sent: Jun 12, 2023 10:41 PM > To: LOM Group , Tim Ziegler < > timjzieg...@gmail.com> > Subject: Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > Timothy J. Ziegler > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1929954088.1429981.1686719932388%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1929954088.1429981.1686719932388%40mail.yahoo.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3ANqPA6DViODrLfNT3Tr0Ztw26jQmwVLBPPn%2BHaRADA%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
Thanks Mac I will. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Wed, Jun 14, 2023 at 12:14 AM M.W.Foscue wrote: > Tim, > > > > One more possibility (probability): > > Jatoba - AKA "Brazilian Cherry" > > > > Check it out. > > Mac > -- > -- > > -Original Message- > From: > Sent: Jun 13, 2023 2:23 PM > To: > Subject: Re: Shoe Horn Handle on the REVO > > > Well of them 3 it really looks like this. > I just have to remember if I would have done a job with that species. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > On Tue, Jun 13, 2023 at 6:13 AM wrote: > >> https://www.wood-database.com/cumaru/ >> >> https://www.wood-database.com/african-padauk/ >> >> https://www.wood-database.com/peruvian-walnut/ >> >> >> >> here you go Tim >> -- >> >> *From:* legacy-ornamental-mills@googlegroups.com < >> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler >> *Sent:* Tuesday, June 13, 2023 8:51 PM >> *To:* legacy-ornamental-mills@googlegroups.com >> *Subject:* Re: Shoe Horn Handle on the REVO >> >> >> >> Thanks Mac, >> >> >> >> I am actually still trying to decide what species it is. I don't recall >> any of those species you mentioned. >> >> But I will be looking it up. Just happened to be the exact size I was >> looking for and was a very dense and >> >> hard wood that seemed it would take the everyday use of a shoe horn. >> >> Stay tuned. >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> -- >> -- >> On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue >> wrote: >> >> Tim, >> >> >> >> Very nice - thanks for sharing. >> >> The pics are low res. - so a bit difficult deciding the wood type. But a >> couple guesses are: >> >> Peruvian Walnut? >> >> Paduk? >> >> Cumaru? >> >> >> >> Cheers! >> >> Mac >> -- >> -- >> >> -Original Message- >> From: >> Sent: Jun 12, 2023 10:41 PM >> To: LOM Group , Tim Ziegler < >> timjzieg...@gmail.com> >> Subject: Shoe Horn Handle on the REVO >> >> >> >> Good evening, >> >> >> >> Well I thought it was time to turn something of use again so I had a shoe >> horn kit that has been sitting in my "Kits" drawer long enough. >> >> So I turned this on my REVO. >> >> 6 start 3/8 pitch spiral. about 9.5 inches long. >> >> Species, honestly I have to look it up, so stay tuned. No its not cherry >> either. >> >> Fun little project that will serve me well. >> >> >> Kind Regards, >> >> Timothy J. Ziegler >> >> -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEs8x1smfdG5GM1MwRgkR-we2%3Dwv7nwd3-HDVQujvG3mQ%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
yup I have 2 more that i need to outfit with motors lol. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 11:52 PM wrote: > Totally, once you go drive motors you will never go back to handing crank > again > > > > Bill > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Wednesday, June 14, 2023 2:36 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Thanks Bill. ;-) > > > > It (adding the motors) really makes all the Legacy equipment into a Very > different machine. > > > > C.A.G. > > > > On Wednesday, June 14, 2023 at 12:24:41 AM EDT, > wrote: > > > > > > I listen to you curt I have a drive motor and a spindle motor on my revo > for years now > > > > Bill > > > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Wednesday, June 14, 2023 2:00 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Drive motor? You mean someone finally listened to me? ;-P > > > > Keep up the good work, Tim. > > I cant wait to see more of your work. ;-) > > > > Have a good night. > > > > C.A.G. > > > > On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > > > > Thanks Mike, it was a lot of fun to do too. I am looking forward to doing > more small items on the > > Revo, since I have a drive motor on it, it really makes it much easier. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 9:33 PM Mike Newman > wrote: > > Very nice. I like the look of the flute/spiral combo design. > > On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: > > Thanks Dan > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com > wrote: > > Yes, Tim. Nicely done! > > DanK > > > > On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: > > Me too > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:53 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > thanks Bill, > > yeah wasn't much for mod's used on it. I sure like how it came out. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 12:41 AM wrote: > > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjz...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2ess
Re: Shoe Horn Handle on the REVO
yes much more control and smoother. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 11:36 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Thanks Bill. ;-) > > It (adding the motors) really makes all the Legacy equipment into a Very > different machine. > > C.A.G. > > On Wednesday, June 14, 2023 at 12:24:41 AM EDT, > wrote: > > > I listen to you curt I have a drive motor and a spindle motor on my revo > for years now > > > > Bill > > > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Wednesday, June 14, 2023 2:00 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Drive motor? You mean someone finally listened to me? ;-P > > > > Keep up the good work, Tim. > > I cant wait to see more of your work. ;-) > > > > Have a good night. > > > > C.A.G. > > > > On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > > > > Thanks Mike, it was a lot of fun to do too. I am looking forward to doing > more small items on the > > Revo, since I have a drive motor on it, it really makes it much easier. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 9:33 PM Mike Newman > wrote: > > Very nice. I like the look of the flute/spiral combo design. > > On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: > > Thanks Dan > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com > wrote: > > Yes, Tim. Nicely done! > > DanK > > > > On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: > > Me too > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:53 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > thanks Bill, > > yeah wasn't much for mod's used on it. I sure like how it came out. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 12:41 AM wrote: > > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjz...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. &
Re: Shoe Horn Handle on the REVO
lol Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 11:24 PM wrote: > I listen to you curt I have a drive motor and a spindle motor on my revo > for years now > > > > Bill > > > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Wednesday, June 14, 2023 2:00 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Drive motor? You mean someone finally listened to me? ;-P > > > > Keep up the good work, Tim. > > I cant wait to see more of your work. ;-) > > > > Have a good night. > > > > C.A.G. > > > > On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > > > > Thanks Mike, it was a lot of fun to do too. I am looking forward to doing > more small items on the > > Revo, since I have a drive motor on it, it really makes it much easier. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 9:33 PM Mike Newman > wrote: > > Very nice. I like the look of the flute/spiral combo design. > > On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: > > Thanks Dan > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com > wrote: > > Yes, Tim. Nicely done! > > DanK > > > > On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: > > Me too > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:53 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > thanks Bill, > > yeah wasn't much for mod's used on it. I sure like how it came out. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 12:41 AM wrote: > > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjz...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/0
Re: Shoe Horn Handle on the REVO
It is indeed and a lot of fun learning its little quirks. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 11:16 PM wrote: > Like I always say great mill the revo > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Wednesday, June 14, 2023 12:43 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Thanks Mike, it was a lot of fun to do too. I am looking forward to doing > more small items on the > > Revo, since I have a drive motor on it, it really makes it much easier. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 9:33 PM Mike Newman > wrote: > > Very nice. I like the look of the flute/spiral combo design. > > On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: > > Thanks Dan > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > > > On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com > wrote: > > Yes, Tim. Nicely done! > > DanK > > > > On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: > > Me too > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:53 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > thanks Bill, > > yeah wasn't much for mod's used on it. I sure like how it came out. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > > > > > On Tue, Jun 13, 2023 at 12:41 AM wrote: > > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjz...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups &g
Re: Shoe Horn Handle on the REVO
wouldn't want it any other way lol. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 11:00 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Drive motor? You mean someone finally listened to me? ;-P > > Keep up the good work, Tim. > I cant wait to see more of your work. ;-) > > Have a good night. > > C.A.G. > > On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Thanks Mike, it was a lot of fun to do too. I am looking forward to doing > more small items on the > Revo, since I have a drive motor on it, it really makes it much easier. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Tue, Jun 13, 2023 at 9:33 PM Mike Newman > wrote: > > Very nice. I like the look of the flute/spiral combo design. > > On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: > > Thanks Dan > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com > wrote: > > Yes, Tim. Nicely done! > DanK > > On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: > > Me too > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:53 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > thanks Bill, > > yeah wasn't much for mod's used on it. I sure like how it came out. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 12:41 AM wrote: > > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjz...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamenta
Re: Shoe Horn Handle on the REVO
Hey MAC I think you are right. Hard, dense wood, radish heugh. Jatoba - AKA "Brazilian Cherry" looks like it fits the bill. ;-) Good call. C.A.G. On Wednesday, June 14, 2023 at 01:14:01 AM EDT, M.W.Foscue wrote: Tim, One more possibility (probability): Jatoba - AKA "Brazilian Cherry" Check it out. Mac -Original Message- From: Sent: Jun 13, 2023 2:23 PM To: Subject: Re: Shoe Horn Handle on the REVO Well of them 3 it really looks like this. I just have to remember if I would have done a job with that species. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Tue, Jun 13, 2023 at 6:13 AM wrote: https://www.wood-database.com/cumaru/ https://www.wood-database.com/african-padauk/ https://www.wood-database.com/peruvian-walnut/ here you go Tim From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:51 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO Thanks Mac, I am actually still trying to decide what species it is. I don't recall any of those species you mentioned. But I will be looking it up. Just happened to be the exact size I was looking for and was a very dense and hard wood that seemed it would take the everyday use of a shoe horn. Stay tuned. Kind Regards, Timothy J. Ziegler On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue wrote: Tim, Very nice - thanks for sharing. The pics are low res. - so a bit difficult deciding the wood type. But a couple guesses are: Peruvian Walnut? Paduk? Cumaru? Cheers! Mac -Original Message- From: Sent: Jun 12, 2023 10:41 PM To: LOM Group , Tim Ziegler Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1929954088.1429981.1686719932388%40mail.yahoo.com.
Re: Shoe Horn Handle on the REVO
Tim, One more possibility (probability): Jatoba - AKA "Brazilian Cherry" Check it out. Mac -Original Message- From: Sent: Jun 13, 2023 2:23 PM To: Subject: Re: Shoe Horn Handle on the REVO Well of them 3 it really looks like this. I just have to remember if I would have done a job with that species. Kind Regards, Timothy J. Ziegler Ziegler WoodWork Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 6:13 AM mailto:bulke...@mmnet.com.au)> wrote: https://www.wood-database.com/cumaru/ https://www.wood-database.com/african-padauk/ https://www.wood-database.com/peruvian-walnut/ here you go Tim From: legacy-ornamental-mills@googlegroups.com (mailto:legacy-ornamental-mills@googlegroups.com) mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:51 PM To: legacy-ornamental-mills@googlegroups.com (mailto:legacy-ornamental-mills@googlegroups.com) Subject: Re: Shoe Horn Handle on the REVO Thanks Mac, I am actually still trying to decide what species it is. I don't recall any of those species you mentioned. But I will be looking it up. Just happened to be the exact size I was looking for and was a very dense and hard wood that seemed it would take the everyday use of a shoe horn. Stay tuned. Kind Regards, Timothy J. Ziegler On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote: Tim, Very nice - thanks for sharing. The pics are low res. - so a bit difficult deciding the wood type. But a couple guesses are: Peruvian Walnut? Paduk? Cumaru? Cheers! Mac -Original Message- From: mailto:legacy-ornamental-mills@googlegroups.com)> Sent: Jun 12, 2023 10:41 PM To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com)>, Tim Ziegler mailto:timjzieg...@gmail.com)> Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net.
RE: Shoe Horn Handle on the REVO
Totally, once you go drive motors you will never go back to handing crank again Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Wednesday, June 14, 2023 2:36 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO Thanks Bill. ;-) It (adding the motors) really makes all the Legacy equipment into a Very different machine. C.A.G. On Wednesday, June 14, 2023 at 12:24:41 AM EDT, mailto:bulke...@mmnet.com.au> > wrote: I listen to you curt I have a drive motor and a spindle motor on my revo for years now Bill From: 'Curt George' via Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> > Sent: Wednesday, June 14, 2023 2:00 PM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: Re: Shoe Horn Handle on the REVO Drive motor? You mean someone finally listened to me? ;-P Keep up the good work, Tim. I cant wait to see more of your work. ;-) Have a good night. C.A.G. On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote: Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more small items on the Revo, since I have a drive motor on it, it really makes it much easier. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 9:33 PM Mike Newman mailto:mrnewma...@outlook.com> > wrote: Very nice. I like the look of the flute/spiral combo design. On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: Thanks Dan Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com <mailto:cdkr...@gmail.com> mailto:cdkr...@gmail.com> > wrote: Yes, Tim. Nicely done! DanK On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> wrote: Me too Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:53 PM To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> Subject: Re: Shoe Horn Handle on the REVO thanks Bill, yeah wasn't much for mod's used on it. I sure like how it came out. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 12:41 AM mailto:bulk...@mmnet.com.au> > wrote: Very nice Tim totally proves simple looks great. Done with your new fine pitch gears no doubt Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 12:41 PM To: LOM Group ; Tim Ziegler mailto:timjz...@gmail.com> > Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%
Re: Shoe Horn Handle on the REVO
Thanks Bill. ;-) It (adding the motors) really makes all the Legacy equipment into a Very different machine. C.A.G. On Wednesday, June 14, 2023 at 12:24:41 AM EDT, wrote: I listen to you curt I have a drive motor and a spindle motor on my revo for years now Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Wednesday, June 14, 2023 2:00 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO Drive motor? You mean someone finally listened to me? ;-P Keep up the good work, Tim. I cant wait to see more of your work. ;-) Have a good night. C.A.G. On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler wrote: Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more small items on the Revo, since I have a drive motor on it, it really makes it much easier. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 9:33 PM Mike Newman wrote: Very nice. I like the look of the flute/spiral combo design. On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: Thanks Dan Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com wrote: Yes, Tim. Nicely done! DanK On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: Me too Bill From: legacy-orna...@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:53 PM To: legacy-orna...@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO thanks Bill, yeah wasn't much for mod's used on it. I sure like how it came out. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 12:41 AM wrote: Very nice Tim totally proves simple looks great. Done with your new fine pitch gears no doubt Bill From: legacy-orna...@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 12:41 PM To: LOM Group ; Tim Ziegler Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/b23bc761-e618-4168-924d-e172300215cen%40googlegroups.com. -- You received this message beca
RE: Shoe Horn Handle on the REVO
I listen to you curt I have a drive motor and a spindle motor on my revo for years now Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Wednesday, June 14, 2023 2:00 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO Drive motor? You mean someone finally listened to me? ;-P Keep up the good work, Tim. I cant wait to see more of your work. ;-) Have a good night. C.A.G. On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote: Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more small items on the Revo, since I have a drive motor on it, it really makes it much easier. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 9:33 PM Mike Newman mailto:mrnewma...@outlook.com> > wrote: Very nice. I like the look of the flute/spiral combo design. On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: Thanks Dan Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com <mailto:cdkr...@gmail.com> mailto:cdkr...@gmail.com> > wrote: Yes, Tim. Nicely done! DanK On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> wrote: Me too Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:53 PM To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> Subject: Re: Shoe Horn Handle on the REVO thanks Bill, yeah wasn't much for mod's used on it. I sure like how it came out. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 12:41 AM mailto:bulk...@mmnet.com.au> > wrote: Very nice Tim totally proves simple looks great. Done with your new fine pitch gears no doubt Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 12:41 PM To: LOM Group mailto:legacy-orna...@googlegroups.com> >; Tim Ziegler mailto:timjz...@gmail.com> > Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com <https://groups.google.com/d/msgid/legac
RE: Shoe Horn Handle on the REVO
Like I always say great mill the revo Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Wednesday, June 14, 2023 12:43 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more small items on the Revo, since I have a drive motor on it, it really makes it much easier. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 9:33 PM Mike Newman mailto:mrnewma...@outlook.com> > wrote: Very nice. I like the look of the flute/spiral combo design. On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: Thanks Dan Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com <mailto:cdkr...@gmail.com> mailto:cdkr...@gmail.com> > wrote: Yes, Tim. Nicely done! DanK On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> wrote: Me too Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:53 PM To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> Subject: Re: Shoe Horn Handle on the REVO thanks Bill, yeah wasn't much for mod's used on it. I sure like how it came out. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 12:41 AM mailto:bulk...@mmnet.com.au> > wrote: Very nice Tim totally proves simple looks great. Done with your new fine pitch gears no doubt Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> mailto:legacy-orna...@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 12:41 PM To: LOM Group mailto:legacy-orna...@googlegroups.com> >; Tim Ziegler mailto:timjz...@gmail.com> > Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com <mailto:legacy-ornamental...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiv
Re: Shoe Horn Handle on the REVO
Drive motor? You mean someone finally listened to me? ;-P Keep up the good work, Tim.I cant wait to see more of your work. ;-) Have a good night. C.A.G. On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler wrote: Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more small items on the Revo, since I have a drive motor on it, it really makes it much easier. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Tue, Jun 13, 2023 at 9:33 PM Mike Newman wrote: Very nice. I like the look of the flute/spiral combo design. On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: Thanks Dan Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com wrote: Yes, Tim. Nicely done! DanK On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: Me too Bill From: legacy-orna...@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:53 PM To: legacy-orna...@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO thanks Bill, yeah wasn't much for mod's used on it. I sure like how it came out. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 12:41 AM wrote: Very nice Tim totally proves simple looks great. Done with your new fine pitch gears no doubt Bill From: legacy-orna...@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 12:41 PM To: LOM Group ; Tim Ziegler Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/b23bc761-e618-4168-924d-e172300215cen%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF5Dr4xa8JpMWdQ_noV002-oinYOOO4-BwYQNgB0f0__g%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from
Re: Shoe Horn Handle on the REVO
Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more small items on the Revo, since I have a drive motor on it, it really makes it much easier. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 9:33 PM Mike Newman wrote: > Very nice. I like the look of the flute/spiral combo design. > > On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: > >> Thanks Dan >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> >> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com >> wrote: >> >>> Yes, Tim. Nicely done! >>> DanK >>> >>> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au >>> wrote: >>> >>>> Me too >>>> >>>> >>>> >>>> Bill >>>> >>>> >>>> >>>> *From:* legacy-orna...@googlegroups.com < >>>> legacy-orna...@googlegroups.com> *On Behalf Of *Tim Ziegler >>>> *Sent:* Tuesday, June 13, 2023 8:53 PM >>>> *To:* legacy-orna...@googlegroups.com >>>> *Subject:* Re: Shoe Horn Handle on the REVO >>>> >>>> >>>> >>>> thanks Bill, >>>> >>>> yeah wasn't much for mod's used on it. I sure like how it came out. >>>> >>>> Kind Regards, >>>> >>>> >>>> >>>> Timothy J. Ziegler >>>> >>>> Ziegler WoodWork & Specialty >>>> >>>> 14171 160th Ave. >>>> >>>> Foreston MN 56330 >>>> >>>> >>>> >>>> 320-294-5798 <(320)%20294-5798> shop >>>> >>>> 320-630-2243 <(320)%20630-2243> cell >>>> >>>> >>>> >>>> >>>> >>>> On Tue, Jun 13, 2023 at 12:41 AM wrote: >>>> >>>> Very nice Tim totally proves simple looks great. >>>> >>>> Done with your new fine pitch gears no doubt >>>> >>>> >>>> >>>> Bill >>>> >>>> >>>> >>>> *From:* legacy-orna...@googlegroups.com < >>>> legacy-orna...@googlegroups.com> *On Behalf Of *Tim Ziegler >>>> *Sent:* Tuesday, June 13, 2023 12:41 PM >>>> *To:* LOM Group ; Tim Ziegler < >>>> timjz...@gmail.com> >>>> *Subject:* Shoe Horn Handle on the REVO >>>> >>>> >>>> >>>> Good evening, >>>> >>>> >>>> >>>> Well I thought it was time to turn something of use again so I had a >>>> shoe horn kit that has been sitting in my "Kits" drawer long enough. >>>> >>>> So I turned this on my REVO. >>>> >>>> 6 start 3/8 pitch spiral. about 9.5 inches long. >>>> >>>> Species, honestly I have to look it up, so stay tuned. No its not >>>> cherry either. >>>> >>>> Fun little project that will serve me well. >>>> >>>> >>>> Kind Regards, >>>> >>>> >>>> >>>> Timothy J. Ziegler >>>> >>>> Ziegler WoodWork & Specialty >>>> >>>> 14171 160th Ave. >>>> >>>> Foreston MN 56330 >>>> >>>> >>>> >>>> 320-294-5798 <(320)%20294-5798> shop >>>> >>>> 320-630-2243 <(320)%20630-2243> cell >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Legacy Ornamental Mills" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to legacy-ornamental...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> >>>> . >>>> >>>> -- >>>> Y
Re: Shoe Horn Handle on the REVO
Very nice. I like the look of the flute/spiral combo design. On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote: > Thanks Dan > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com > wrote: > >> Yes, Tim. Nicely done! >> DanK >> >> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: >> >>> Me too >>> >>> >>> >>> Bill >>> >>> >>> >>> *From:* legacy-orna...@googlegroups.com >>> *On Behalf Of *Tim Ziegler >>> *Sent:* Tuesday, June 13, 2023 8:53 PM >>> *To:* legacy-orna...@googlegroups.com >>> *Subject:* Re: Shoe Horn Handle on the REVO >>> >>> >>> >>> thanks Bill, >>> >>> yeah wasn't much for mod's used on it. I sure like how it came out. >>> >>> Kind Regards, >>> >>> >>> >>> Timothy J. Ziegler >>> >>> Ziegler WoodWork & Specialty >>> >>> 14171 160th Ave. >>> >>> Foreston MN 56330 >>> >>> >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> >>> 320-630-2243 <(320)%20630-2243> cell >>> >>> >>> >>> >>> >>> On Tue, Jun 13, 2023 at 12:41 AM wrote: >>> >>> Very nice Tim totally proves simple looks great. >>> >>> Done with your new fine pitch gears no doubt >>> >>> >>> >>> Bill >>> >>> >>> >>> *From:* legacy-orna...@googlegroups.com >>> *On Behalf Of *Tim Ziegler >>> *Sent:* Tuesday, June 13, 2023 12:41 PM >>> *To:* LOM Group ; Tim Ziegler < >>> timjz...@gmail.com> >>> *Subject:* Shoe Horn Handle on the REVO >>> >>> >>> >>> Good evening, >>> >>> >>> >>> Well I thought it was time to turn something of use again so I had a >>> shoe horn kit that has been sitting in my "Kits" drawer long enough. >>> >>> So I turned this on my REVO. >>> >>> 6 start 3/8 pitch spiral. about 9.5 inches long. >>> >>> Species, honestly I have to look it up, so stay tuned. No its not cherry >>> either. >>> >>> Fun little project that will serve me well. >>> >>> >>> Kind Regards, >>> >>> >>> >>> Timothy J. Ziegler >>> >>> Ziegler WoodWork & Specialty >>> >>> 14171 160th Ave. >>> >>> Foreston MN 56330 >>> >>> >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> >>> 320-630-2243 <(320)%20630-2243> cell >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com >>> >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au >>> >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legac
Re: Shoe Horn Handle on the REVO
Thanks Dan Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com wrote: > Yes, Tim. Nicely done! > DanK > > On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: > >> Me too >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com >> *On Behalf Of *Tim Ziegler >> *Sent:* Tuesday, June 13, 2023 8:53 PM >> *To:* legacy-orna...@googlegroups.com >> *Subject:* Re: Shoe Horn Handle on the REVO >> >> >> >> thanks Bill, >> >> yeah wasn't much for mod's used on it. I sure like how it came out. >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> >> >> >> >> On Tue, Jun 13, 2023 at 12:41 AM wrote: >> >> Very nice Tim totally proves simple looks great. >> >> Done with your new fine pitch gears no doubt >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com >> *On Behalf Of *Tim Ziegler >> *Sent:* Tuesday, June 13, 2023 12:41 PM >> *To:* LOM Group ; Tim Ziegler < >> timjz...@gmail.com> >> *Subject:* Shoe Horn Handle on the REVO >> >> >> >> Good evening, >> >> >> >> Well I thought it was time to turn something of use again so I had a shoe >> horn kit that has been sitting in my "Kits" drawer long enough. >> >> So I turned this on my REVO. >> >> 6 start 3/8 pitch spiral. about 9.5 inches long. >> >> Species, honestly I have to look it up, so stay tuned. No its not cherry >> either. >> >> Fun little project that will serve me well. >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHy3UYNHuyQ%3D9E9d%3D2_1xY8M24QN0SAN7-5m9Dd0LjCeg%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
thx Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 6:15 AM wrote: > Me too > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:53 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > thanks Bill, > > yeah wasn't much for mod's used on it. I sure like how it came out. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Jun 13, 2023 at 12:41 AM wrote: > > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjzieg...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d99de8%243afa3570%24b0eea050%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d99de8%243afa3570%24b0eea050%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFQFf%3DaoWg5d2GWfEpaoGBRHZWhoMUG0%3DzOweWh9eg2kg%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
Well of them 3 it really looks like this. I just have to remember if I would have done a job with that species. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 6:13 AM wrote: > https://www.wood-database.com/cumaru/ > > https://www.wood-database.com/african-padauk/ > > https://www.wood-database.com/peruvian-walnut/ > > > > here you go Tim > > > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:51 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Thanks Mac, > > > > I am actually still trying to decide what species it is. I don't recall > any of those species you mentioned. > > But I will be looking it up. Just happened to be the exact size I was > looking for and was a very dense and > > hard wood that seemed it would take the everyday use of a shoe horn. > > Stay tuned. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue > wrote: > > Tim, > > > > Very nice - thanks for sharing. > > The pics are low res. - so a bit difficult deciding the wood type. But a > couple guesses are: > > Peruvian Walnut? > > Paduk? > > Cumaru? > > > > Cheers! > > Mac > -- > -- > > -Original Message- > From: > Sent: Jun 12, 2023 10:41 PM > To: LOM Group , Tim Ziegler < > timjzieg...@gmail.com> > Subject: Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > Timothy J. Ziegler > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFHiZj94XuhWkdQcExJ3pcXK7o0rxiq_UgQ1Zh9fGopRA%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
Thanks Bill Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 6:13 AM wrote: > https://www.wood-database.com/cumaru/ > > https://www.wood-database.com/african-padauk/ > > https://www.wood-database.com/peruvian-walnut/ > > > > here you go Tim > > > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:51 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > Thanks Mac, > > > > I am actually still trying to decide what species it is. I don't recall > any of those species you mentioned. > > But I will be looking it up. Just happened to be the exact size I was > looking for and was a very dense and > > hard wood that seemed it would take the everyday use of a shoe horn. > > Stay tuned. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue > wrote: > > Tim, > > > > Very nice - thanks for sharing. > > The pics are low res. - so a bit difficult deciding the wood type. But a > couple guesses are: > > Peruvian Walnut? > > Paduk? > > Cumaru? > > > > Cheers! > > Mac > -- > -- > > -Original Message- > From: > Sent: Jun 12, 2023 10:41 PM > To: LOM Group , Tim Ziegler < > timjzieg...@gmail.com> > Subject: Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > Timothy J. Ziegler > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFnZpKH0qrcwXjP_BChy7A3%3D4J0mV1YSxjs%3DwZd7E3n0A%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
Yes, Tim. Nicely done! DanK On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote: > Me too > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 8:53 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Shoe Horn Handle on the REVO > > > > thanks Bill, > > yeah wasn't much for mod's used on it. I sure like how it came out. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > > > > > On Tue, Jun 13, 2023 at 12:41 AM wrote: > > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjz...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com.
RE: Shoe Horn Handle on the REVO
Me too Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:53 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO thanks Bill, yeah wasn't much for mod's used on it. I sure like how it came out. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 12:41 AM mailto:bulke...@mmnet.com.au> > wrote: Very nice Tim totally proves simple looks great. Done with your new fine pitch gears no doubt Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 12:41 PM To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler mailto:timjzieg...@gmail.com> > Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d99de8%243afa3570%24b0eea050%24%40mmnet.com.au.
RE: Shoe Horn Handle on the REVO
https://www.wood-database.com/cumaru/ https://www.wood-database.com/african-padauk/ https://www.wood-database.com/peruvian-walnut/ here you go Tim From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 8:51 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Shoe Horn Handle on the REVO Thanks Mac, I am actually still trying to decide what species it is. I don't recall any of those species you mentioned. But I will be looking it up. Just happened to be the exact size I was looking for and was a very dense and hard wood that seemed it would take the everyday use of a shoe horn. Stay tuned. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote: Tim, Very nice - thanks for sharing. The pics are low res. - so a bit difficult deciding the wood type. But a couple guesses are: Peruvian Walnut? Paduk? Cumaru? Cheers! Mac _ _ -Original Message- From: mailto:legacy-ornamental-mills@googlegroups.com> > Sent: Jun 12, 2023 10:41 PM To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >, Tim Ziegler mailto:timjzieg...@gmail.com> > Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net <https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au.
Re: Shoe Horn Handle on the REVO
thanks Bill, yeah wasn't much for mod's used on it. I sure like how it came out. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jun 13, 2023 at 12:41 AM wrote: > Very nice Tim totally proves simple looks great. > > Done with your new fine pitch gears no doubt > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, June 13, 2023 12:41 PM > *To:* LOM Group ; Tim Ziegler < > timjzieg...@gmail.com> > *Subject:* Shoe Horn Handle on the REVO > > > > Good evening, > > > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > > So I turned this on my REVO. > > 6 start 3/8 pitch spiral. about 9.5 inches long. > > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > > Fun little project that will serve me well. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
Thanks Mac, I am actually still trying to decide what species it is. I don't recall any of those species you mentioned. But I will be looking it up. Just happened to be the exact size I was looking for and was a very dense and hard wood that seemed it would take the everyday use of a shoe horn. Stay tuned. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue wrote: > Tim, > > > > Very nice - thanks for sharing. > > The pics are low res. - so a bit difficult deciding the wood type. But a > couple guesses are: > > Peruvian Walnut? > > Paduk? > > Cumaru? > > > > Cheers! > > Mac > -- > -- > > -Original Message- > From: > Sent: Jun 12, 2023 10:41 PM > To: LOM Group , Tim Ziegler < > timjzieg...@gmail.com> > Subject: Shoe Horn Handle on the REVO > > > Good evening, > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > So I turned this on my REVO. > 6 start 3/8 pitch spiral. about 9.5 inches long. > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > Fun little project that will serve me well. > > Kind Regards, > Timothy J. Ziegler > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com.
RE: Shoe Horn Handle on the REVO
Very nice Tim totally proves simple looks great. Done with your new fine pitch gears no doubt Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, June 13, 2023 12:41 PM To: LOM Group ; Tim Ziegler Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au.
Re: Shoe Horn Handle on the REVO
Tim, Very nice - thanks for sharing. The pics are low res. - so a bit difficult deciding the wood type. But a couple guesses are: Peruvian Walnut? Paduk? Cumaru? Cheers! Mac -Original Message- From: Sent: Jun 12, 2023 10:41 PM To: LOM Group , Tim Ziegler Subject: Shoe Horn Handle on the REVO Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards,Timothy J. Ziegler -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net.
Re: Shoe Horn Handle on the REVO
Thanks Curt. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jun 12, 2023 at 9:51 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Tim > That Elegant, Nicely Done! > I cant wait to find out more. I like how the flutes and rope flows > together in one handle. A+ in my book. > Thank you. > > C.A.G. > > On Monday, June 12, 2023 at 10:41:17 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Good evening, > > Well I thought it was time to turn something of use again so I had a shoe > horn kit that has been sitting in my "Kits" drawer long enough. > So I turned this on my REVO. > 6 start 3/8 pitch spiral. about 9.5 inches long. > Species, honestly I have to look it up, so stay tuned. No its not cherry > either. > Fun little project that will serve me well. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/623893060.1820684.1686624673650%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/623893060.1820684.1686624673650%40mail.yahoo.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLENJKh4kX6fQf5NSujiw63ic3dOA6X_CohAhO1bEiyBgA%40mail.gmail.com.
Re: Shoe Horn Handle on the REVO
TimThat Elegant, Nicely Done!I cant wait to find out more. I like how the flutes and rope flows together in one handle. A+ in my book.Thank you. C.A.G. On Monday, June 12, 2023 at 10:41:17 PM EDT, Tim Ziegler wrote: Good evening, Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/623893060.1820684.1686624673650%40mail.yahoo.com.
Re: Converting my REVO to .125 pitch w-gears
Hey Dan, Yeah if you find something that will simplify the process let me know, but for now the gear changes are the fastest. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, May 1, 2023 at 9:16 AM cdkr...@gmail.com wrote: > This does look interesting, Tim. Thank you for pictures. I'm looking at > light duty worm gear boxes just to see what's out there. > DanK > > > On Monday, May 1, 2023 at 8:51:01 AM UTC-4 bulk...@mmnet.com.au wrote: > >> Of course not, I meant try the hand crank to see if it easier then you >> will know if its >> >> easy and wont be straining your spindle motor or gear sets >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com >> *On Behalf Of *Tim Ziegler >> *Sent:* Monday, May 1, 2023 9:35 PM >> *To:* legacy-orna...@googlegroups.com >> *Subject:* Re: Converting my REVO to .125 pitch w-gears >> >> >> >> I was hoping I would not have to crank by hand as I get that small of >> items my bits may want to burn so >> >> the less hand cranking the better. >> >> Well will see what the next steps are. >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> >> >> >> >> On Mon, May 1, 2023 at 6:24 AM wrote: >> >> Yes >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com >> *On Behalf Of *Tim Ziegler >> *Sent:* Monday, May 1, 2023 9:07 PM >> *To:* legacy-orna...@googlegroups.com >> *Subject:* Re: Converting my REVO to .125 pitch w-gears >> >> >> >> you mean by hand crank? >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> >> >> >> >> On Sun, Apr 30, 2023 at 10:12 PM wrote: >> >> Try winding it from the spindle instead Tim you might find it will take >> less power >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com >> *On Behalf Of *Tim Ziegler >> *Sent:* Monday, May 1, 2023 12:47 PM >> *To:* LOM Group ; Tim Ziegler < >> timjz...@gmail.com> >> *Subject:* Converting my REVO to .125 pitch w-gears >> >> >> >> Well I did it with a lot of gear mods and add ins. >> >> Also changed the linkage between the drive gear and the duplex gear. >> >> I added 4.5 inches and tapped additional holes to move the directional >> gear >> >> to accommodate the X 2 gear as the drive gear. I cut out a spacer on my >> Laser >> >> to allow me to put the elongated holed indexable gear in the place for a >> drive gear. >> >> I have plans to change this already,as it's really changing the power it >> takes to run it. >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >
Re: Converting my REVO to .125 pitch w-gears
Oh of course I have done that I turn the crank slightly to make sure all is seated well. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, May 1, 2023 at 7:51 AM wrote: > Of course not, I meant try the hand crank to see if it easier then you > will know if its > > easy and wont be straining your spindle motor or gear sets > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 9:35 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Converting my REVO to .125 pitch w-gears > > > > I was hoping I would not have to crank by hand as I get that small of > items my bits may want to burn so > > the less hand cranking the better. > > Well will see what the next steps are. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, May 1, 2023 at 6:24 AM wrote: > > Yes > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 9:07 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Converting my REVO to .125 pitch w-gears > > > > you mean by hand crank? > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sun, Apr 30, 2023 at 10:12 PM wrote: > > Try winding it from the spindle instead Tim you might find it will take > less power > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 12:47 PM > *To:* LOM Group ; Tim Ziegler < > timjzieg...@gmail.com> > *Subject:* Converting my REVO to .125 pitch w-gears > > > > Well I did it with a lot of gear mods and add ins. > > Also changed the linkage between the drive gear and the duplex gear. > > I added 4.5 inches and tapped additional holes to move the directional > gear > > to accommodate the X 2 gear as the drive gear. I cut out a spacer on my > Laser > > to allow me to put the elongated holed indexable gear in the place for a > drive gear. > > I have plans to change this already,as it's really changing the power it > takes to run it. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/C
Re: Converting my REVO to .125 pitch w-gears
This does look interesting, Tim. Thank you for pictures. I'm looking at light duty worm gear boxes just to see what's out there. DanK On Monday, May 1, 2023 at 8:51:01 AM UTC-4 bulk...@mmnet.com.au wrote: > Of course not, I meant try the hand crank to see if it easier then you > will know if its > > easy and wont be straining your spindle motor or gear sets > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 9:35 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Converting my REVO to .125 pitch w-gears > > > > I was hoping I would not have to crank by hand as I get that small of > items my bits may want to burn so > > the less hand cranking the better. > > Well will see what the next steps are. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > > > > > On Mon, May 1, 2023 at 6:24 AM wrote: > > Yes > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 9:07 PM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Converting my REVO to .125 pitch w-gears > > > > you mean by hand crank? > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > > > > > On Sun, Apr 30, 2023 at 10:12 PM wrote: > > Try winding it from the spindle instead Tim you might find it will take > less power > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com *On > Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 12:47 PM > *To:* LOM Group ; Tim Ziegler < > timjz...@gmail.com> > *Subject:* Converting my REVO to .125 pitch w-gears > > > > Well I did it with a lot of gear mods and add ins. > > Also changed the linkage between the drive gear and the duplex gear. > > I added 4.5 inches and tapped additional holes to move the directional > gear > > to accommodate the X 2 gear as the drive gear. I cut out a spacer on my > Laser > > to allow me to put the elongated holed indexable gear in the place for a > drive gear. > > I have plans to change this already,as it's really changing the power it > takes to run it. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 <(320)%20294-5798> shop > > 320-630-2243 <(320)%20630-2243> cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com
RE: Converting my REVO to .125 pitch w-gears
Of course not, I meant try the hand crank to see if it easier then you will know if its easy and wont be straining your spindle motor or gear sets Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, May 1, 2023 9:35 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Converting my REVO to .125 pitch w-gears I was hoping I would not have to crank by hand as I get that small of items my bits may want to burn so the less hand cranking the better. Well will see what the next steps are. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, May 1, 2023 at 6:24 AM mailto:bulke...@mmnet.com.au> > wrote: Yes Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Monday, May 1, 2023 9:07 PM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: Re: Converting my REVO to .125 pitch w-gears you mean by hand crank? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Apr 30, 2023 at 10:12 PM mailto:bulke...@mmnet.com.au> > wrote: Try winding it from the spindle instead Tim you might find it will take less power Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Monday, May 1, 2023 12:47 PM To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler mailto:timjzieg...@gmail.com> > Subject: Converting my REVO to .125 pitch w-gears Well I did it with a lot of gear mods and add ins. Also changed the linkage between the drive gear and the duplex gear. I added 4.5 inches and tapped additional holes to move the directional gear to accommodate the X 2 gear as the drive gear. I cut out a spacer on my Laser to allow me to put the elongated holed indexable gear in the place for a drive gear. I have plans to change this already,as it's really changing the power it takes to run it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000
Re: Converting my REVO to .125 pitch w-gears
I was hoping I would not have to crank by hand as I get that small of items my bits may want to burn so the less hand cranking the better. Well will see what the next steps are. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, May 1, 2023 at 6:24 AM wrote: > Yes > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 9:07 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Converting my REVO to .125 pitch w-gears > > > > you mean by hand crank? > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sun, Apr 30, 2023 at 10:12 PM wrote: > > Try winding it from the spindle instead Tim you might find it will take > less power > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 12:47 PM > *To:* LOM Group ; Tim Ziegler < > timjzieg...@gmail.com> > *Subject:* Converting my REVO to .125 pitch w-gears > > > > Well I did it with a lot of gear mods and add ins. > > Also changed the linkage between the drive gear and the duplex gear. > > I added 4.5 inches and tapped additional holes to move the directional > gear > > to accommodate the X 2 gear as the drive gear. I cut out a spacer on my > Laser > > to allow me to put the elongated holed indexable gear in the place for a > drive gear. > > I have plans to change this already,as it's really changing the power it > takes to run it. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d97c1f%2477c59c50%246750d4f0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d97c1f%2477c59c50%246750d4f0%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFGGpt-BU4f3x5cxaiDc5fodQMf0aC7pUEMH6gio_%2BXGw%40mail.gmail.com.
RE: Converting my REVO to .125 pitch w-gears
Yes Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, May 1, 2023 9:07 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Converting my REVO to .125 pitch w-gears you mean by hand crank? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Apr 30, 2023 at 10:12 PM mailto:bulke...@mmnet.com.au> > wrote: Try winding it from the spindle instead Tim you might find it will take less power Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Monday, May 1, 2023 12:47 PM To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler mailto:timjzieg...@gmail.com> > Subject: Converting my REVO to .125 pitch w-gears Well I did it with a lot of gear mods and add ins. Also changed the linkage between the drive gear and the duplex gear. I added 4.5 inches and tapped additional holes to move the directional gear to accommodate the X 2 gear as the drive gear. I cut out a spacer on my Laser to allow me to put the elongated holed indexable gear in the place for a drive gear. I have plans to change this already,as it's really changing the power it takes to run it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000a01d97c1f%2477c59c50%246750d4f0%24%40mmnet.com.au.
Re: Converting my REVO to .125 pitch w-gears
you mean by hand crank? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Apr 30, 2023 at 10:12 PM wrote: > Try winding it from the spindle instead Tim you might find it will take > less power > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, May 1, 2023 12:47 PM > *To:* LOM Group ; Tim Ziegler < > timjzieg...@gmail.com> > *Subject:* Converting my REVO to .125 pitch w-gears > > > > Well I did it with a lot of gear mods and add ins. > > Also changed the linkage between the drive gear and the duplex gear. > > I added 4.5 inches and tapped additional holes to move the directional > gear > > to accommodate the X 2 gear as the drive gear. I cut out a spacer on my > Laser > > to allow me to put the elongated holed indexable gear in the place for a > drive gear. > > I have plans to change this already,as it's really changing the power it > takes to run it. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHymqSdV46AFQo2kS7urjB%3DjEmfLXwNg3p0eYJqZb%3DXVQ%40mail.gmail.com.
RE: Converting my REVO to .125 pitch w-gears
Try winding it from the spindle instead Tim you might find it will take less power Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, May 1, 2023 12:47 PM To: LOM Group ; Tim Ziegler Subject: Converting my REVO to .125 pitch w-gears Well I did it with a lot of gear mods and add ins. Also changed the linkage between the drive gear and the duplex gear. I added 4.5 inches and tapped additional holes to move the directional gear to accommodate the X 2 gear as the drive gear. I cut out a spacer on my Laser to allow me to put the elongated holed indexable gear in the place for a drive gear. I have plans to change this already,as it's really changing the power it takes to run it. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHE0O8iX0uotmOBLyxO2E0iku_na8grkUcCQLHh61f%3DdA%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d97bda%24ab2b5110%240181f330%24%40mmnet.com.au.
Re: Drive motor on my Revo
Hey Curt, Can you separate the subjects again? I really want all your ACME screw information on the same page so none of your information gets mixed up or lost. It deserves that. Based on the input the Revo drive motor was of no one's interest so lets keep your subject going. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Apr 15, 2023 at 11:53 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Guys! > Just walked in, (home from work.) > As far as this Acme screw idea, So far I am very happy with it. (and > again, I want to state, I can go back without any problems.) I own the > 5/8-8 acme tap. If anyone wants to try switching, I can make and send them > a new split nut for there Legacy. Nothing needs to change, Make a new > split nut, the rod couplers stay the same, Only the rod is changed. And > Depending on the length of the acme screw, you have on your Legacy, You are > looking at under $40.00 . (here is a copy form the Mc Master-Carr web site.) > 5/8"-8 > [image: click to learn more about 5/8-8] > 12" 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A724 > <https://www.mcmaster.com/98935A724> 8.60 > 5/8"-8 > [image: click to learn more about 5/8-8] > 2 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A914 > <https://www.mcmaster.com/98935A914> 10.36 > 5/8"-8 > [image: click to learn more about 5/8-8] > 3 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A829 > <https://www.mcmaster.com/98935A829> 11.01 > 5/8"-8 > [image: click to learn more about 5/8-8] > 4 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A915 > <https://www.mcmaster.com/98935A915> 15.54 > 5/8"-8 > [image: click to learn more about 5/8-8] > 6 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 53,000 ASTM A108 98935A035 > <https://www.mcmaster.com/98935A035> 22.10 > 5/8"-8 > [image: click to learn more about 5/8-8] > 8 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A916 > <https://www.mcmaster.com/98935A916> 29.78 > 5/8"-8 > [image: click to learn more about 5/8-8] > 12 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A642 > <https://www.mcmaster.com/98935A642> 39.38 > > If you are going to work with small turnings, this idea may to fit the > bill. > A 1/4" pitch being the smallest, offers a possibility, that you could not > do before. > > And if you want a good finish/quality of cut right off the machine, The > 1/4" pitch gives you a very nice cut. > > HEY Guys! I know that I am overly tired now. but the idea just hit me. > > If you buy a small (12") 5/8-8 screw, you may fit it into your linkage, > this way if you want to go small you could put the 5/8-8 screw ,up front/ > headstock end, and not change anything, except the split nut for working > small. *Or*,.?. > Just buy a 12" screw and then just adjust the pillow block that holds the > acme screw on the Legacy. > After all, when working small, you do not need a 12 feet of acme screw > when, inches would work to get the job done. > This would mean a $8.60 or $10.36 price tag. ;-) > > Im going to hit the hay now. Have a good night. > Talk to you all tomorrow. > Take care! > > C.A.G. > > > > On Saturday, April 15, 2023 at 11:27:05 PM EDT, > wrote: > > > Tim I toyed with doing it I did all the prep and the math but I never did > do it I didn’t want to loose > > The larger pitches so a took a different path and made fine pitch gears > instead so this is totally Curts baby > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Sunday, April 16, 2023 6:26 AM > *To:* legacy-ornamental-mills@googlegroup
Re: Drive motor on my Revo
Yes. Sent from the all new AOL app for iOS On Friday, April 14, 2023, 11:04 AM, Ccm Ccm wrote: Yes On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills wrote: Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings?After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything. So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do. Thank you. C.A.G. On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/ msgid/legacy-ornamental-mills/ 6c79c908-a92b-4e5a-a5fd- fffa7d6c65c4n%40googlegroups. com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/110657178.3503999.1681661124057%40mail.yahoo.com.
Re: Drive motor on my Revo
Yup super excited to see you moving forward with this project. On Sat, Apr 15, 2023, 11:53 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Guys! > Just walked in, (home from work.) > As far as this Acme screw idea, So far I am very happy with it. (and > again, I want to state, I can go back without any problems.) I own the > 5/8-8 acme tap. If anyone wants to try switching, I can make and send them > a new split nut for there Legacy. Nothing needs to change, Make a new > split nut, the rod couplers stay the same, Only the rod is changed. And > Depending on the length of the acme screw, you have on your Legacy, You are > looking at under $40.00 . (here is a copy form the Mc Master-Carr web site.) > 5/8"-8 > [image: click to learn more about 5/8-8] > 12" 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A724 > <https://www.mcmaster.com/98935A724> 8.60 > 5/8"-8 > [image: click to learn more about 5/8-8] > 2 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A914 > <https://www.mcmaster.com/98935A914> 10.36 > 5/8"-8 > [image: click to learn more about 5/8-8] > 3 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A829 > <https://www.mcmaster.com/98935A829> 11.01 > 5/8"-8 > [image: click to learn more about 5/8-8] > 4 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A915 > <https://www.mcmaster.com/98935A915> 15.54 > 5/8"-8 > [image: click to learn more about 5/8-8] > 6 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 53,000 ASTM A108 98935A035 > <https://www.mcmaster.com/98935A035> 22.10 > 5/8"-8 > [image: click to learn more about 5/8-8] > 8 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A916 > <https://www.mcmaster.com/98935A916> 29.78 > 5/8"-8 > [image: click to learn more about 5/8-8] > 12 ft. 1 1:1 0.125" Class 2G > [image: click to learn more about Class 2G] > Grade 2 > [image: click to learn more about Grade 2] > Rockwell B61 64,000 ASTM A108 98935A642 > <https://www.mcmaster.com/98935A642> 39.38 > > If you are going to work with small turnings, this idea may to fit the > bill. > A 1/4" pitch being the smallest, offers a possibility, that you could not > do before. > > And if you want a good finish/quality of cut right off the machine, The > 1/4" pitch gives you a very nice cut. > > HEY Guys! I know that I am overly tired now. but the idea just hit me. > > If you buy a small (12") 5/8-8 screw, you may fit it into your linkage, > this way if you want to go small you could put the 5/8-8 screw ,up front/ > headstock end, and not change anything, except the split nut for working > small. *Or*,.?. > Just buy a 12" screw and then just adjust the pillow block that holds the > acme screw on the Legacy. > After all, when working small, you do not need a 12 feet of acme screw > when, inches would work to get the job done. > This would mean a $8.60 or $10.36 price tag. ;-) > > Im going to hit the hay now. Have a good night. > Talk to you all tomorrow. > Take care! > > C.A.G. > > > > On Saturday, April 15, 2023 at 11:27:05 PM EDT, > wrote: > > > Tim I toyed with doing it I did all the prep and the math but I never did > do it I didn’t want to loose > > The larger pitches so a took a different path and made fine pitch gears > instead so this is totally Curts baby > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Sunday, April 16, 2023 6:26 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Drive motor on my Revo > > > > Hey Dan, > > > > > > yeah I am considering it too. I know it works as Bill had done it a while > back too. > > So with Curt and Bill both playing with the idea its got to be a good > idea. > > I want to gear down to do some fancy pen turning too which can n
Re: Drive motor on my Revo
Oops sorry On Sat, Apr 15, 2023, 10:27 PM wrote: > Tim I toyed with doing it I did all the prep and the math but I never did > do it I didn’t want to loose > > The larger pitches so a took a different path and made fine pitch gears > instead so this is totally Curts baby > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Sunday, April 16, 2023 6:26 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Drive motor on my Revo > > > > Hey Dan, > > > > > > yeah I am considering it too. I know it works as Bill had done it a while > back too. > > So with Curt and Bill both playing with the idea its got to be a good > idea. > > I want to gear down to do some fancy pen turning too which can not be done > as well with the current thread config. > > So let me know if you jump at it and try too. > > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sat, Apr 15, 2023 at 2:00 PM Dan Krager wrote: > > I like the REVO because of it's extensive flexibility. All my "big" > machines are multi-function by choice. I've used it for spirals, straight > polygons, box joints, dovetails, mortise, tenon, template profiles, plates > and rosettes. I'm in the process of making another 6 handscrews with London > pattern handles in Jatoba and solid copper ferrules. Pictures pending. Off > to true up the Jatoba octagons prepping for the profile of the London > pattern. Am considering Curt's idea of replacing the 4 pitch acme with 8 > pitch to see if I can get closer to wooden thread pitches. > > DanK > > On Saturday, April 15, 2023 at 12:02:38 AM UTC-4 Curt George wrote: > > Hello and Good evening everyone. > > > > Thank you all. > > > > Have a good night. > > > > > > C.A.G. > > > > On Saturday, April 15, 2023 at 12:00:51 AM EDT, > wrote: > > > > > > Yes got the message > > Don Moss > > > > On Apr 14, 2023, at 11:20 AM, Scott Gauze wrote: > > > > Yes > > Sent from Scott Gauze > > 1-606-571-8553 <(606)%20571-8553> > > sga...@foothills.net > > > > On Apr 14, 2023, at 11:04 AM, Ccm Ccm wrote: > > Yes > > On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > Hello and Good morning everyone. Just a question on this posting. Is > everyone receiving these postings? > > After talking (private e-mail) It was suggested that perhaps many of the > others in the group were not seeing everything. > > > > So I decided to use Tim's Revo motor posting to double check the settings. > > > > Could everyone, Please reply if you do. a simple YES would do. > > > > Thank you. > > > > C.A.G. > > On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > > Well after waiting and putting things off, I finally put the drive motor > and > > controls on to my Revo. Though I will be changing somethings at least now > > i have it so I can use it with a drive. > > Not wild about chain drive but it works until I come up with something > else. > > I still need mounting plates for the micro switches but sure opens up a > lot > > of possibilities with a drive. I now have 4 of my machines with drives. > and 2 manual machines. > > Comments or questions??? > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> > > Foreston MN 56330 > <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> > > > > 320-294-5798 shop > > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+ unsub...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/legacy-ornamental-mills/ 6c79c908-a92b-4e5a-a5fd- > fffa7d6c65c4n%40googlegroups. com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this mess
Re: Drive motor on my Revo
Hello Guys!Just walked in, (home from work.) As far as this Acme screw idea, So far I am very happy with it. (and again, I want to state, I can go back without any problems.) I own the 5/8-8 acme tap. If anyone wants to try switching, I can make and send them a new split nut for there Legacy. Nothing needs to change, Make a new split nut, the rod couplers stay the same, Only the rod is changed. And Depending on the length of the acme screw, you have on your Legacy, You are looking at under $40.00 . (here is a copy form the Mc Master-Carr web site.) | 5/8"-8 | 12" | 1 | 1:1 | 0.125" | Class 2G | Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A724 | 8.60 | | 5/8"-8 | 2 ft. | 1 | 1:1 | 0.125" | Class 2G | Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A914 | 10.36 | | 5/8"-8 | 3 ft. | 1 | 1:1 | 0.125" | Class 2G | Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A829 | 11.01 | | 5/8"-8 | 4 ft. | 1 | 1:1 | 0.125" | Class 2G | Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A915 | 15.54 | | 5/8"-8 | 6 ft. | 1 | 1:1 | 0.125" | Class 2G | Grade 2 | Rockwell B61 | 53,000 | ASTM A108 | 98935A035 | 22.10 | | 5/8"-8 | 8 ft. | 1 | 1:1 | 0.125" | Class 2G | Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A916 | 29.78 | | 5/8"-8 | 12 ft. | 1 | 1:1 | 0.125" | Class 2G | Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A642 | 39.38 | If you are going to work with small turnings, this idea may to fit the bill. A 1/4" pitch being the smallest, offers a possibility, that you could not do before. And if you want a good finish/quality of cut right off the machine, The 1/4" pitch gives you a very nice cut. HEY Guys! I know that I am overly tired now. but the idea just hit me. If you buy a small (12") 5/8-8 screw, you may fit it into your linkage, this way if you want to go small you could put the 5/8-8 screw ,up front/ headstock end, and not change anything, except the split nut for working small. Or,.?. Just buy a 12" screw and then just adjust the pillow block that holds the acme screw on the Legacy. After all, when working small, you do not need a 12 feet of acme screw when, inches would work to get the job done. This would mean a $8.60 or $10.36 price tag. ;-) Im going to hit the hay now. Have a good night. Talk to you all tomorrow.Take care! C.A.G. On Saturday, April 15, 2023 at 11:27:05 PM EDT, wrote: Tim I toyed with doing it I did all the prep and the math but I never did do it I didn’t want to loose The larger pitches so a took a different path and made fine pitch gears instead so this is totally Curts baby From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Sunday, April 16, 2023 6:26 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Drive motor on my Revo Hey Dan, yeah I am considering it too. I know it works as Bill had done it a while back too. So with Curt and Bill both playing with the idea its got to be a good idea. I want to gear down to do some fancy pen turning too which can not be done as well with the current thread config. So let me know if you jump at it and try too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Apr 15, 2023 at 2:00 PM Dan Krager wrote: I like the REVO because of it's extensive flexibility. All my "big" machines are multi-function by choice. I've used it for spirals, straight polygons, box joints, dovetails, mortise, tenon, template profiles, plates and rosettes. I'm in the process of making another 6 handscrews with London pattern handles in Jatoba and solid copper ferrules. Pictures pending. Off to true up the Jatoba octagons prepping for the profile of the London pattern. Am considering Curt's idea of replacing the 4 pitch acme with 8 pitch to see if I can get closer to wooden thread pitches. DanK On Saturday, April 15, 2023 at 12:02:38 AM UTC-4 Curt George wrote: Hello and Good evening everyone. Thank you all. Have a good night. C.A.G. On Saturday, April 15, 2023 at 12:00:51 AM EDT, wrote: Yes got the message Don Moss On Apr 14, 2023, at 11:20 AM, Scott Gauze wrote: Yes Sent from Scott Gauze 1-606-571-8553 sga...@foothills.net On Apr 14, 2023, at 11:04 AM, Ccm Ccm wrote: Yes On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills wrote: Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings? After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything. So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do. Thank
Re: Drive motor on my Revo
Hey Dan, yeah I am considering it too. I know it works as Bill had done it a while back too. So with Curt and Bill both playing with the idea its got to be a good idea. I want to gear down to do some fancy pen turning too which can not be done as well with the current thread config. So let me know if you jump at it and try too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Apr 15, 2023 at 2:00 PM Dan Krager wrote: > I like the REVO because of it's extensive flexibility. All my "big" > machines are multi-function by choice. I've used it for spirals, straight > polygons, box joints, dovetails, mortise, tenon, template profiles, plates > and rosettes. I'm in the process of making another 6 handscrews with London > pattern handles in Jatoba and solid copper ferrules. Pictures pending. Off > to true up the Jatoba octagons prepping for the profile of the London > pattern. Am considering Curt's idea of replacing the 4 pitch acme with 8 > pitch to see if I can get closer to wooden thread pitches. > DanK > On Saturday, April 15, 2023 at 12:02:38 AM UTC-4 Curt George wrote: > >> Hello and Good evening everyone. >> >> Thank you all. >> >> Have a good night. >> >> >> C.A.G. >> >> On Saturday, April 15, 2023 at 12:00:51 AM EDT, >> wrote: >> >> >> Yes got the message >> >> Don Moss >> >> On Apr 14, 2023, at 11:20 AM, Scott Gauze wrote: >> >> >> >> Yes >> >> Sent from Scott Gauze >> 1-606-571-8553 <(606)%20571-8553> >> sga...@foothills.net >> >> On Apr 14, 2023, at 11:04 AM, Ccm Ccm wrote: >> >> Yes >> >> On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills < >> legacy-orna...@googlegroups.com> wrote: >> >> Hello and Good morning everyone. Just a question on this posting. Is >> everyone receiving these postings? >> After talking (private e-mail) It was suggested that perhaps many of the >> others in the group were not seeing everything. >> >> So I decided to use Tim's Revo motor posting to double check the >> settings. >> >> Could everyone, Please reply if you do. a simple YES would do. >> >> Thank you. >> >> C.A.G. >> >> On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: >> >> Well after waiting and putting things off, I finally put the drive motor >> and >> controls on to my Revo. Though I will be changing somethings at least now >> i have it so I can use it with a drive. >> Not wild about chain drive but it works until I come up with something >> else. >> I still need mounting plates for the micro switches but sure opens up a >> lot >> of possibilities with a drive. I now have 4 of my machines with drives. >> and 2 manual machines. >> Comments or questions??? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> >> Foreston MN 56330 >> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+ unsub...@googlegroups.com. >> To view this discussion on the web visit https://groups.google.com/d/ >> msgid/legacy-ornamental-mills/ 6c79c908-a92b-4e5a-a5fd- >> fffa7d6c65c4n%40googlegroups. com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com?utm_medium=email_source=footer> >> . >> >> -- >> You received this message
Re: Drive motor on my Revo
I like the REVO because of it's extensive flexibility. All my "big" machines are multi-function by choice. I've used it for spirals, straight polygons, box joints, dovetails, mortise, tenon, template profiles, plates and rosettes. I'm in the process of making another 6 handscrews with London pattern handles in Jatoba and solid copper ferrules. Pictures pending. Off to true up the Jatoba octagons prepping for the profile of the London pattern. Am considering Curt's idea of replacing the 4 pitch acme with 8 pitch to see if I can get closer to wooden thread pitches. DanK On Saturday, April 15, 2023 at 12:02:38 AM UTC-4 Curt George wrote: > Hello and Good evening everyone. > > Thank you all. > > Have a good night. > > > C.A.G. > > On Saturday, April 15, 2023 at 12:00:51 AM EDT, > wrote: > > > Yes got the message > > Don Moss > > On Apr 14, 2023, at 11:20 AM, Scott Gauze wrote: > > > > Yes > > Sent from Scott Gauze > 1-606-571-8553 <(606)%20571-8553> > sga...@foothills.net > > On Apr 14, 2023, at 11:04 AM, Ccm Ccm wrote: > > Yes > > On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > > Hello and Good morning everyone. Just a question on this posting. Is > everyone receiving these postings? > After talking (private e-mail) It was suggested that perhaps many of the > others in the group were not seeing everything. > > So I decided to use Tim's Revo motor posting to double check the settings. > > Could everyone, Please reply if you do. a simple YES would do. > > Thank you. > > C.A.G. > > On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > > Well after waiting and putting things off, I finally put the drive motor > and > controls on to my Revo. Though I will be changing somethings at least now > i have it so I can use it with a drive. > Not wild about chain drive but it works until I come up with something > else. > I still need mounting plates for the micro switches but sure opens up a > lot > of possibilities with a drive. I now have 4 of my machines with drives. > and 2 manual machines. > Comments or questions??? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> > Foreston MN 56330 > <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> > > 320-294-5798 shop > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+ unsub...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/legacy-ornamental-mills/ 6c79c908-a92b-4e5a-a5fd- > fffa7d6c65c4n%40googlegroups. com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/220120B2-58A0-4497-AA95-450E6F7C5C92%40foothills.net > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/220120B2-58A0-4497-AA95-450E6F7C5C92%40foothills.net?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Legacy Ornamental Mills" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/legacy-ornamental-mills/1U5OXIwOdp8/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to
Re: Drive motor on my Revo
Hello and Good evening everyone. Thank you all. Have a good night. C.A.G. On Saturday, April 15, 2023 at 12:00:51 AM EDT, wrote: Yes got the message Don Moss On Apr 14, 2023, at 11:20 AM, Scott Gauze wrote: Yes Sent from Scott gauze1-606-571-8553sga...@foothills.net On Apr 14, 2023, at 11:04 AM, Ccm Ccm wrote: Yes On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills wrote: Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings?After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything. So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do. Thank you. C.A.G. On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+ unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/ msgid/legacy-ornamental-mills/ 6c79c908-a92b-4e5a-a5fd- fffa7d6c65c4n%40googlegroups. com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/220120B2-58A0-4497-AA95-450E6F7C5C92%40foothills.net. -- You received this message because you are subscribed to a topic in the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/legacy-ornamental-mills/1U5OXIwOdp8/unsubscribe. To unsubscribe from this group and all its topics, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/9E91F602-59BB-4FC7-84EC-01012E380FC8%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/269167826.2002065.1681531352711%40mail.yahoo.com.
Re: Drive motor on my Revo
Hey Bridgette, No actual the business side of the Revo is on the outside. So it's actually designed very well. I got some more pixels of it and I'm sure Bill will chime into why he likes the Revo so much. Everything is right in front of the operator. Thanks for asking. Tim On Fri, Apr 14, 2023, 4:47 PM Brigitte Graham wrote: > Yes, > As a "Lurker" I do see all the Legacy communications, but don't always > chime in. > I have noted that on this machine, the drive screw is on the inside of the > rails, does that not get in the way of bigger operations? > Legacy Widow > > On Fri, 14 Apr 2023 at 13:31, 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > >> Hello and Good morning everyone. Just a question on this posting. Is >> everyone receiving these postings? >> After talking (private e-mail) It was suggested that perhaps many of the >> others in the group were not seeing everything. >> >> So I decided to use Tim's Revo motor posting to double check the >> settings. >> >> Could everyone, Please reply if you do. a simple YES would do. >> >> Thank you. >> >> C.A.G. >> >> On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: >> >>> Well after waiting and putting things off, I finally put the drive motor >>> and >>> controls on to my Revo. Though I will be changing somethings at least now >>> i have it so I can use it with a drive. >>> Not wild about chain drive but it works until I come up with something >>> else. >>> I still need mounting plates for the micro switches but sure opens up a >>> lot >>> of possibilities with a drive. I now have 4 of my machines with drives. >>> and 2 manual machines. >>> Comments or questions??? >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> 320-630-2243 <(320)%20630-2243> cell >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2NHGxG1zse8RTqJS-fUeWnKf6uqo%3DNVu9hStgpQLBwtpg%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2NHGxG1zse8RTqJS-fUeWnKf6uqo%3DNVu9hStgpQLBwtpg%40mail.gmail.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHedLGwQdfJjtPuiQiWL1HtXA-eWZBLg3Ts5bKtVesy0A%40mail.gmail.com.
Re: Drive motor on my Revo
Yes, As a "Lurker" I do see all the Legacy communications, but don't always chime in. I have noted that on this machine, the drive screw is on the inside of the rails, does that not get in the way of bigger operations? Legacy Widow On Fri, 14 Apr 2023 at 13:31, 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello and Good morning everyone. Just a question on this posting. Is > everyone receiving these postings? > After talking (private e-mail) It was suggested that perhaps many of the > others in the group were not seeing everything. > > So I decided to use Tim's Revo motor posting to double check the settings. > > Could everyone, Please reply if you do. a simple YES would do. > > Thank you. > > C.A.G. > > On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > >> Well after waiting and putting things off, I finally put the drive motor >> and >> controls on to my Revo. Though I will be changing somethings at least now >> i have it so I can use it with a drive. >> Not wild about chain drive but it works until I come up with something >> else. >> I still need mounting plates for the micro switches but sure opens up a >> lot >> of possibilities with a drive. I now have 4 of my machines with drives. >> and 2 manual machines. >> Comments or questions??? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2NHGxG1zse8RTqJS-fUeWnKf6uqo%3DNVu9hStgpQLBwtpg%40mail.gmail.com.
Re: Drive motor on my Revo
Yes. DanK On Friday, April 14, 2023 at 2:08:56 PM UTC-4 Owner wrote: > Yep, > Michael Kratky > 119 Riverview Rd., > Northville, N.Y. 12134 > LOM 1200 > > 518 863-2821 <(518)%20863-2821> > text 518 207-7247 <(518)%20207-7247> > > Email; > kra...@roadrunner.com > > > > On Apr 14, 2023, at 1:57 PM, Tim Ziegler wrote: > > yes > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > > > On Fri, Apr 14, 2023 at 7:31 AM 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> wrote: > >> Hello and Good morning everyone. Just a question on this posting. Is >> everyone receiving these postings? >> After talking (private e-mail) It was suggested that perhaps many of the >> others in the group were not seeing everything. >> >> So I decided to use Tim's Revo motor posting to double check the >> settings. >> >> Could everyone, Please reply if you do. a simple YES would do. >> >> Thank you. >> >> C.A.G. >> >> On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: >> >>> Well after waiting and putting things off, I finally put the drive motor >>> and >>> controls on to my Revo. Though I will be changing somethings at least now >>> i have it so I can use it with a drive. >>> Not wild about chain drive but it works until I come up with something >>> else. >>> I still need mounting plates for the micro switches but sure opens up a >>> lot >>> of possibilities with a drive. I now have 4 of my machines with drives. >>> and 2 manual machines. >>> Comments or questions??? >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> 320-630-2243 <(320)%20630-2243> cell >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> >> . >> > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGr8-GefJKfY%2BxyuKSydyfHF2GQzD1yRjKjo-vjxP_%3Dfw%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGr8-GefJKfY%2BxyuKSydyfHF2GQzD1yRjKjo-vjxP_%3Dfw%40mail.gmail.com?utm_medium=email_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/ee49991d-48da-4830-a8bd-197e5feefdd5n%40googlegroups.com.
Re: Drive motor on my Revo
Yes. On Friday, April 14, 2023 at 12:58:28 PM UTC-4 Ray Leaman wrote: > Yes > > On Fri, Apr 14, 2023 at 12:22 PM M.W.Foscue wrote: > >> Yes. >> >> Mac >> -- >> -- >> >> -Original Message- >> From: >> Sent: Apr 14, 2023 8:31 AM >> To: Legacy Ornamental Mills >> Subject: Re: Drive motor on my Revo >> >> >> Hello and Good morning everyone. Just a question on this posting. Is >> everyone receiving these postings? >> After talking (private e-mail) It was suggested that perhaps many of the >> others in the group were not seeing everything. >> >> So I decided to use Tim's Revo motor posting to double check the >> settings. >> >> Could everyone, Please reply if you do. a simple YES would do. >> >> Thank you. >> >> C.A.G. >> >> On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: >> >>> Well after waiting and putting things off, I finally put the drive motor >>> and >>> controls on to my Revo. Though I will be changing somethings at least now >>> i have it so I can use it with a drive. >>> Not wild about chain drive but it works until I come up with something >>> else. >>> I still need mounting plates for the micro switches but sure opens up a >>> lot >>> of possibilities with a drive. I now have 4 of my machines with drives. >>> and 2 manual machines. >>> Comments or questions??? >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 <(320)%20294-5798> shop >>> 320-630-2243 <(320)%20630-2243> cell >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> >> . >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/abdaf353-5905-0514-0524-65f5a82987b1%40earthlink.net >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/abdaf353-5905-0514-0524-65f5a82987b1%40earthlink.net?utm_medium=email_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/3ed64d64-8638-48fb-a05c-91d8b1402f59n%40googlegroups.com.
Re: Drive motor on my Revo
Yep, Michael Kratky 119 Riverview Rd., Northville, N.Y. 12134 LOM 1200 518 863-2821 text 518 207-7247 Email; krat...@roadrunner.com > On Apr 14, 2023, at 1:57 PM, Tim Ziegler wrote: > > yes > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Apr 14, 2023 at 7:31 AM 'Curt George' via Legacy Ornamental Mills > <mailto:legacy-ornamental-mills@googlegroups.com>> wrote: >> Hello and Good morning everyone. Just a question on this posting. Is >> everyone receiving these postings? >> After talking (private e-mail) It was suggested that perhaps many of the >> others in the group were not seeing everything. >> >> So I decided to use Tim's Revo motor posting to double check the settings. >> >> Could everyone, Please reply if you do. a simple YES would do. >> >> Thank you. >> >> C.A.G. >> >> On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com >> <mailto:timjz...@gmail.com> wrote: >>> Well after waiting and putting things off, I finally put the drive motor >>> and >>> controls on to my Revo. Though I will be changing somethings at least now >>> i have it so I can use it with a drive. >>> Not wild about chain drive but it works until I come up with something >>> else. >>> I still need mounting plates for the micro switches but sure opens up a lot >>> of possibilities with a drive. I now have 4 of my machines with drives. and >>> 2 manual machines. >>> Comments or questions??? >>> >>> Kind Regards, >>> >>> Timothy J. Ziegler >>> Ziegler WoodWork & Specialty >>> 14171 160th Ave. >>> Foreston MN 56330 >>> >>> 320-294-5798 shop >>> 320-630-2243 cell >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com >> <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer>. > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGr8-GefJKfY%2BxyuKSydyfHF2GQzD1yRjKjo-vjxP_%3Dfw%40mail.gmail.com > > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGr8-GefJKfY%2BxyuKSydyfHF2GQzD1yRjKjo-vjxP_%3Dfw%40mail.gmail.com?utm_medium=email_source=footer>. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/979C7CE8-49B1-41D6-B6D9-6DEE94EAC66E%40roadrunner.com.
Re: Drive motor on my Revo
yes Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Apr 14, 2023 at 7:31 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello and Good morning everyone. Just a question on this posting. Is > everyone receiving these postings? > After talking (private e-mail) It was suggested that perhaps many of the > others in the group were not seeing everything. > > So I decided to use Tim's Revo motor posting to double check the settings. > > Could everyone, Please reply if you do. a simple YES would do. > > Thank you. > > C.A.G. > > On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > >> Well after waiting and putting things off, I finally put the drive motor >> and >> controls on to my Revo. Though I will be changing somethings at least now >> i have it so I can use it with a drive. >> Not wild about chain drive but it works until I come up with something >> else. >> I still need mounting plates for the micro switches but sure opens up a >> lot >> of possibilities with a drive. I now have 4 of my machines with drives. >> and 2 manual machines. >> Comments or questions??? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGr8-GefJKfY%2BxyuKSydyfHF2GQzD1yRjKjo-vjxP_%3Dfw%40mail.gmail.com.
Re: Drive motor on my Revo
Yes On Fri, Apr 14, 2023 at 12:22 PM M.W.Foscue wrote: > Yes. > > Mac > -- > -- > > -Original Message- > From: > Sent: Apr 14, 2023 8:31 AM > To: Legacy Ornamental Mills > Subject: Re: Drive motor on my Revo > > > Hello and Good morning everyone. Just a question on this posting. Is > everyone receiving these postings? > After talking (private e-mail) It was suggested that perhaps many of the > others in the group were not seeing everything. > > So I decided to use Tim's Revo motor posting to double check the settings. > > Could everyone, Please reply if you do. a simple YES would do. > > Thank you. > > C.A.G. > > On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > >> Well after waiting and putting things off, I finally put the drive motor >> and >> controls on to my Revo. Though I will be changing somethings at least now >> i have it so I can use it with a drive. >> Not wild about chain drive but it works until I come up with something >> else. >> I still need mounting plates for the micro switches but sure opens up a >> lot >> of possibilities with a drive. I now have 4 of my machines with drives. >> and 2 manual machines. >> Comments or questions??? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> > . > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/abdaf353-5905-0514-0524-65f5a82987b1%40earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/abdaf353-5905-0514-0524-65f5a82987b1%40earthlink.net?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCd%2BLMqPC_36EA2TsqCO2SgF9A%2BZ6ye%3DKAaYN8R6enO0C_A%40mail.gmail.com.
Re: Drive motor on my Revo
Yes. Mac -Original Message- From: Sent: Apr 14, 2023 8:31 AM To: Legacy Ornamental Mills Subject: Re: Drive motor on my Revo Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings?After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything. So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do. Thank you. C.A.G. On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least now i have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards, Timothy J. Ziegler Ziegler WoodWork Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 (tel:(320)%20294-5798) shop 320-630-2243 (tel:(320)%20630-2243) cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com (mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com). To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/abdaf353-5905-0514-0524-65f5a82987b1%40earthlink.net.
RE: Drive motor on my Revo
yes From: 'Curt George' via Legacy Ornamental Mills Sent: Friday, April 14, 2023 10:32 PM To: Legacy Ornamental Mills Subject: Re: Drive motor on my Revo Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings? After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything. So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do. Thank you. C.A.G. On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com <mailto:timjz...@gmail.com> wrote: Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least now i have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001201d96eea%24694f0810%243bed1830%24%40mmnet.com.au.
Re: Drive motor on my Revo
Yes On Fri, Apr 14, 2023 at 8:31 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello and Good morning everyone. Just a question on this posting. Is > everyone receiving these postings? > After talking (private e-mail) It was suggested that perhaps many of the > others in the group were not seeing everything. > > So I decided to use Tim's Revo motor posting to double check the settings. > > Could everyone, Please reply if you do. a simple YES would do. > > Thank you. > > C.A.G. > > On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > >> Well after waiting and putting things off, I finally put the drive motor >> and >> controls on to my Revo. Though I will be changing somethings at least now >> i have it so I can use it with a drive. >> Not wild about chain drive but it works until I come up with something >> else. >> I still need mounting plates for the micro switches but sure opens up a >> lot >> of possibilities with a drive. I now have 4 of my machines with drives. >> and 2 manual machines. >> Comments or questions??? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> >> Foreston MN 56330 >> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAEnRCdLd7S%3DYy_XOwajLXfwxy7%2BqYxamHkZXWKvhM22GVJu94w%40mail.gmail.com.
Re: Drive motor on my Revo
YesSent from Scott Gauze1-606-571-8553sga...@foothills.netOn Apr 14, 2023, at 11:04 AM, Ccm Ccm wrote:Yes On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings?After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything.So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do.Thank you.C.A.G.On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote:Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/220120B2-58A0-4497-AA95-450E6F7C5C92%40foothills.net.
Re: Drive motor on my Revo
Yes On Friday, April 14, 2023, 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello and Good morning everyone. Just a question on this posting. Is > everyone receiving these postings? > After talking (private e-mail) It was suggested that perhaps many of the > others in the group were not seeing everything. > > So I decided to use Tim's Revo motor posting to double check the settings. > > Could everyone, Please reply if you do. a simple YES would do. > > Thank you. > > C.A.G. > > On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > >> Well after waiting and putting things off, I finally put the drive motor >> and >> controls on to my Revo. Though I will be changing somethings at least now >> i have it so I can use it with a drive. >> Not wild about chain drive but it works until I come up with something >> else. >> I still need mounting plates for the micro switches but sure opens up a >> lot >> of possibilities with a drive. I now have 4 of my machines with drives. >> and 2 manual machines. >> Comments or questions??? >> >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> >> Foreston MN 56330 >> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g> >> >> 320-294-5798 <(320)%20294-5798> shop >> 320-630-2243 <(320)%20630-2243> cell >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd- > fffa7d6c65c4n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRGmcnNy30_0U-8O2B9%3D8JduTvUgAmE6ELE8VPXCRg3LpA%40mail.gmail.com.
Re: Drive motor on my Revo
Yes got the message. Sorry I have been quiet, just been busy the past couple of weeks at work and then finally this week took some time off to “rest” around the house and knock a couple items off the long overdue “To Do” list.That was the goal anyway 路♂️Jeff from Connecticut Sent from my iPhoneOn Apr 14, 2023, at 8:31 AM, 'Curt George' via Legacy Ornamental Mills wrote:Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings?After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything.So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do.Thank you.C.A.G.On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote:Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/03A03478-5805-4FCC-A5C4-E665AEFD2711%40gmail.com.
Re: Drive motor on my Revo
YESOn Apr 14, 2023, at 08:31, 'Curt George' via Legacy Ornamental Mills wrote:Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings?After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything.So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do.Thank you.C.A.G.On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote:Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/761AB989-C023-40F1-B6E3-CB9526B4DCDD%40gmail.com.
Re: Drive motor on my Revo
Hello and Good morning everyone. Just a question on this posting. Is everyone receiving these postings? After talking (private e-mail) It was suggested that perhaps many of the others in the group were not seeing everything. So I decided to use Tim's Revo motor posting to double check the settings. Could everyone, Please reply if you do. a simple YES would do. Thank you. C.A.G. On Monday, April 3, 2023 at 3:06:58 PM UTC-4 timjz...@gmail.com wrote: > Well after waiting and putting things off, I finally put the drive motor > and > controls on to my Revo. Though I will be changing somethings at least now > i have it so I can use it with a drive. > Not wild about chain drive but it works until I come up with something > else. > I still need mounting plates for the micro switches but sure opens up a > lot > of possibilities with a drive. I now have 4 of my machines with drives. > and 2 manual machines. > Comments or questions??? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 <(320)%20294-5798> shop > 320-630-2243 <(320)%20630-2243> cell > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6c79c908-a92b-4e5a-a5fd-fffa7d6c65c4n%40googlegroups.com.
Re: Drive motor on my Revo
yup messing tonight some. Just put a slide stile tensioner on it took some out but temporary too. going to test a couple 1/8 shank dia. HSS bits too. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Apr 3, 2023 at 8:10 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > The Goal is to use it! > > You can always work out the bugs latter. > > As I said I do like what you've done. > > Keep up the good work! > > C.A.G. > > On Monday, April 3, 2023 at 09:06:59 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Hey Curt, > > Yeah I need a tensioner on it and I ran out of time last night when > working on it. Still not sure about the chain. > I really just wanted to have it functional so I would be more inclined to > use it lol. > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Apr 3, 2023 at 7:41 PM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Kool Beans! > > I was going to suggest to only have one limit switch. to make it easer for > you to wire up. > My reasoning is, I ONLY cut form one direction on my mill, I need only one > to stop the cut, I find that two are not necessary for most of the jobs > that I do. > > One question on the motor drive, If you plan to keep the chain, perhaps > making a tension wheel might help keep the chain form sagging and keep the > chain tight on the gears. > > I really like your set-up, I cant wait to hear more about, how well is > works out for you. (Hand cranking is for the Birds! I find once you get a > motor its very have to go back to the "OLD" ways.) ;-) > > > C.A.G. > > On Monday, April 3, 2023 at 05:09:31 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > > Kind Regards, > Hey Curt, > > I do have the micro switches and are wired, I just need to make up some > brackets to mount and use them. > Stay tuned, will be a pretty simple completion step for sure. > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Apr 3, 2023 at 3:26 PM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > That Looks Great Tim. > > I think you will find a motor control for your REVO will make a Big > difference. > > As a side note. as for the limit switches, I found speaker wire, the kind > that has two wires attached to each other. Works well, and keeps everything > neat. > > gota run. > > talk latter. > > C.A.G. > > On Monday, April 3, 2023 at 03:06:59 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Well after waiting and putting things off, I finally put the drive motor > and > controls on to my Revo. Though I will be changing somethings at least now > i have it so I can use it with a drive. > Not wild about chain drive but it works until I come up with something > else. > I still need mounting plates for the micro switches but sure opens up a > lot > of possibilities with a drive. I now have 4 of my machines with drives. > and 2 manual machines. > Comments or questions??? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com > <https
Re: Drive motor on my Revo
The Goal is to use it! You can always work out the bugs latter. As I said I do like what you've done. Keep up the good work! C.A.G. On Monday, April 3, 2023 at 09:06:59 PM EDT, Tim Ziegler wrote: Hey Curt, Yeah I need a tensioner on it and I ran out of time last night when working on it. Still not sure about the chain.I really just wanted to have it functional so I would be more inclined to use it lol. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Mon, Apr 3, 2023 at 7:41 PM 'Curt George' via Legacy Ornamental Mills wrote: Kool Beans! I was going to suggest to only have one limit switch. to make it easer for you to wire up. My reasoning is, I ONLY cut form one direction on my mill, I need only one to stop the cut, I find that two are not necessary for most of the jobs that I do. One question on the motor drive, If you plan to keep the chain, perhaps making a tension wheel might help keep the chain form sagging and keep the chain tight on the gears. I really like your set-up, I cant wait to hear more about, how well is works out for you. (Hand cranking is for the Birds! I find once you get a motor its very have to go back to the "OLD" ways.) ;-) C.A.G. On Monday, April 3, 2023 at 05:09:31 PM EDT, Tim Ziegler wrote: Kind Regards,Hey Curt, I do have the micro switches and are wired, I just need to make up some brackets to mount and use them. Stay tuned, will be a pretty simple completion step for sure. Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Mon, Apr 3, 2023 at 3:26 PM 'Curt George' via Legacy Ornamental Mills wrote: That Looks Great Tim. I think you will find a motor control for your REVO will make a Big difference. As a side note. as for the limit switches, I found speaker wire, the kind that has two wires attached to each other. Works well, and keeps everything neat. gota run. talk latter. C.A.G. On Monday, April 3, 2023 at 03:06:59 PM EDT, Tim Ziegler wrote: Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFyp_JwKG4_UcvpjdRG%3DKbq8qSx0uJEOTXdwSkk8VNjPA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1513365822.2678547.1680568855984%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGQWPdCFAV3aaab8pHG1bXq6POrc07SBSwUbH32dMQN7A%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" grou
Re: Drive motor on my Revo
Hey Curt, Yeah I need a tensioner on it and I ran out of time last night when working on it. Still not sure about the chain. I really just wanted to have it functional so I would be more inclined to use it lol. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Apr 3, 2023 at 7:41 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Kool Beans! > > I was going to suggest to only have one limit switch. to make it easer for > you to wire up. > My reasoning is, I ONLY cut form one direction on my mill, I need only one > to stop the cut, I find that two are not necessary for most of the jobs > that I do. > > One question on the motor drive, If you plan to keep the chain, perhaps > making a tension wheel might help keep the chain form sagging and keep the > chain tight on the gears. > > I really like your set-up, I cant wait to hear more about, how well is > works out for you. (Hand cranking is for the Birds! I find once you get a > motor its very have to go back to the "OLD" ways.) ;-) > > > C.A.G. > > On Monday, April 3, 2023 at 05:09:31 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > > Kind Regards, > Hey Curt, > > I do have the micro switches and are wired, I just need to make up some > brackets to mount and use them. > Stay tuned, will be a pretty simple completion step for sure. > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Mon, Apr 3, 2023 at 3:26 PM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > That Looks Great Tim. > > I think you will find a motor control for your REVO will make a Big > difference. > > As a side note. as for the limit switches, I found speaker wire, the kind > that has two wires attached to each other. Works well, and keeps everything > neat. > > gota run. > > talk latter. > > C.A.G. > > On Monday, April 3, 2023 at 03:06:59 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Well after waiting and putting things off, I finally put the drive motor > and > controls on to my Revo. Though I will be changing somethings at least now > i have it so I can use it with a drive. > Not wild about chain drive but it works until I come up with something > else. > I still need mounting plates for the micro switches but sure opens up a > lot > of possibilities with a drive. I now have 4 of my machines with drives. > and 2 manual machines. > Comments or questions??? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFyp_JwKG4_UcvpjdRG%3DKbq8qSx0uJEOTXdwSkk8VNjPA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFyp_JwKG4_UcvpjdRG%3DKbq8qSx0uJEOTXdwSkk8VNjPA%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You
Re: Drive motor on my Revo
Kool Beans! I was going to suggest to only have one limit switch. to make it easer for you to wire up. My reasoning is, I ONLY cut form one direction on my mill, I need only one to stop the cut, I find that two are not necessary for most of the jobs that I do. One question on the motor drive, If you plan to keep the chain, perhaps making a tension wheel might help keep the chain form sagging and keep the chain tight on the gears. I really like your set-up, I cant wait to hear more about, how well is works out for you. (Hand cranking is for the Birds! I find once you get a motor its very have to go back to the "OLD" ways.) ;-) C.A.G. On Monday, April 3, 2023 at 05:09:31 PM EDT, Tim Ziegler wrote: Kind Regards,Hey Curt, I do have the micro switches and are wired, I just need to make up some brackets to mount and use them. Stay tuned, will be a pretty simple completion step for sure. Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell On Mon, Apr 3, 2023 at 3:26 PM 'Curt George' via Legacy Ornamental Mills wrote: That Looks Great Tim. I think you will find a motor control for your REVO will make a Big difference. As a side note. as for the limit switches, I found speaker wire, the kind that has two wires attached to each other. Works well, and keeps everything neat. gota run. talk latter. C.A.G. On Monday, April 3, 2023 at 03:06:59 PM EDT, Tim Ziegler wrote: Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFyp_JwKG4_UcvpjdRG%3DKbq8qSx0uJEOTXdwSkk8VNjPA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1513365822.2678547.1680568855984%40mail.yahoo.com.
Re: Drive motor on my Revo
Kind Regards, Hey Curt, I do have the micro switches and are wired, I just need to make up some brackets to mount and use them. Stay tuned, will be a pretty simple completion step for sure. Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Apr 3, 2023 at 3:26 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > That Looks Great Tim. > > I think you will find a motor control for your REVO will make a Big > difference. > > As a side note. as for the limit switches, I found speaker wire, the kind > that has two wires attached to each other. Works well, and keeps everything > neat. > > gota run. > > talk latter. > > C.A.G. > > On Monday, April 3, 2023 at 03:06:59 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Well after waiting and putting things off, I finally put the drive motor > and > controls on to my Revo. Though I will be changing somethings at least now > i have it so I can use it with a drive. > Not wild about chain drive but it works until I come up with something > else. > I still need mounting plates for the micro switches but sure opens up a > lot > of possibilities with a drive. I now have 4 of my machines with drives. > and 2 manual machines. > Comments or questions??? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFyp_JwKG4_UcvpjdRG%3DKbq8qSx0uJEOTXdwSkk8VNjPA%40mail.gmail.com.
Re: Drive motor on my Revo
That Looks Great Tim. I think you will find a motor control for your REVO will make a Big difference. As a side note. as for the limit switches, I found speaker wire, the kind that has two wires attached to each other. Works well, and keeps everything neat. gota run. talk latter. C.A.G. On Monday, April 3, 2023 at 03:06:59 PM EDT, Tim Ziegler wrote: Well after waiting and putting things off, I finally put the drive motor and controls on to my Revo. Though I will be changing somethings at least nowi have it so I can use it with a drive. Not wild about chain drive but it works until I come up with something else. I still need mounting plates for the micro switches but sure opens up a lot of possibilities with a drive. I now have 4 of my machines with drives. and 2 manual machines. Comments or questions??? Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3700yU_ZKJpQdJSrA0k7JD1q9PDJydGUypks0%3DDK9HQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/221906000.2608841.1680553557888%40mail.yahoo.com.
RE: REVO handle making
Yes I know I’m just lucky I can even get something here at all Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Monday, 26 September 2022 4:44 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: REVO handle making Bill it was sent out to TIM already. Help is on its way, it just takes time to ship to AU. C.A.G. On Saturday, September 24, 2022 at 11:44:01 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: My spindle motor on the revo is working again but not my drive motor a replacement hopefully Is coming from curt Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler Sent: Sunday, 25 September 2022 9:30 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: Re: REVO handle making Hey Dan, Looking pretty impressive. Yes a drive motor would be great. I still have not installed mine on the Revo as of yet either. I know the first of anything takes time and as you get more and more done they go faster and faster. Soon you'll be the master and making videos too. Do you get to put your brand on the handles? Keep up the great work. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Sep 24, 2022 at 6:21 PM Dan Krager mailto:cdkra...@gmail.com> > wrote: I'm challenging myself to make a set of 20 + Pfeil style handles for a woodworking friend using my recently acquired Legacy REVO ornamental mill. For decades I've wanted an LOM to be able to do precise work like this. Osage orange is notoriously difficult to machine cleanly either by hand or under power. So the challenge is tall. I'm really impressed with the clean accuracy of this process. I'm using a 1/2" upcut spiral bit in the router. Starting with 1 3/8" x 7 3/4" octagon blanks cut on table saw, there is still a lot of material for a router to remove, especially on first facet. It takes two passes per facet, the second being a "cleanup" pass to be sure the template was followed. I have no motor driven feeds, just hand cranks. The first one took almost 30 minutes from bench to bench, but repetition without shortcuts has reduced the time to about 10 minutes average. It cuts through knots and irregular grain as clean as can be. DanK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/aabb15d3-5735-4f09-9d98-47beab748ad2n%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/aabb15d3-5735-4f09-9d98-47beab748ad2n%40googlegroups.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEefpFy9QQQhLsQzrPb2qF9UcHZu8TjdJpYV_Mx-Tt%3DHQ%40mail.gmail.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEefpFy9QQQhLsQzrPb2qF9UcHZu8TjdJpYV_Mx-Tt%3DHQ%40mail.gmail.com?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d8d091%2408a11780%2419e34680%24%40mmnet.com.au <https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d8d091%2408a11780%2419e34680%24%40mmnet.com.au?utm_medium=email_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1104945017.233736.1664131463213%40mail.ya
Re: REVO handle making
Bill it was sent out to TIM already. Help is on its way, it just takes time to ship to AU. C.A.G. On Saturday, September 24, 2022 at 11:44:01 PM EDT, wrote: My spindle motor on the revo is working again but not my drive motor a replacement hopefully Is coming from curt Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Sunday, 25 September 2022 9:30 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: REVO handle making Hey Dan, Looking pretty impressive. Yes a drive motor would be great. I still have not installed mine on the Revo as of yet either. I know the first of anything takes time and as you get more and more done they go faster and faster. Soon you'll be the master and making videos too. Do you get to put your brand on the handles? Keep up the great work. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Sep 24, 2022 at 6:21 PM Dan Krager wrote: I'm challenging myself to make a set of 20 + Pfeil style handles for a woodworking friend using my recently acquired Legacy REVO ornamental mill. For decades I've wanted an LOM to be able to do precise work like this. Osage orange is notoriously difficult to machine cleanly either by hand or under power. So the challenge is tall. I'm really impressed with the clean accuracy of this process. I'm using a 1/2" upcut spiral bit in the router. Starting with 1 3/8" x 7 3/4" octagon blanks cut on table saw, there is still a lot of material for a router to remove, especially on first facet. It takes two passes per facet, the second being a "cleanup" pass to be sure the template was followed. I have no motor driven feeds, just hand cranks. The first one took almost 30 minutes from bench to bench, but repetition without shortcuts has reduced the time to about 10 minutes average. It cuts through knots and irregular grain as clean as can be. DanK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/aabb15d3-5735-4f09-9d98-47beab748ad2n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEefpFy9QQQhLsQzrPb2qF9UcHZu8TjdJpYV_Mx-Tt%3DHQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d8d091%2408a11780%2419e34680%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1104945017.233736.1664131463213%40mail.yahoo.com.
Re: REVO handle making
hopefully tomorrow right! Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sat, Sep 24, 2022 at 10:44 PM wrote: > My spindle motor on the revo is working again but not my drive motor a > replacement hopefully > > Is coming from curt > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Sunday, 25 September 2022 9:30 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: REVO handle making > > > > Hey Dan, > > > > Looking pretty impressive. Yes a drive motor would be great. > > I still have not installed mine on the Revo as of yet either. > > I know the first of anything takes time and as you get more and more done > > they go faster and faster. Soon you'll be the master and making videos > too. > > Do you get to put your brand on the handles? > > Keep up the great work. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Sat, Sep 24, 2022 at 6:21 PM Dan Krager wrote: > > I'm challenging myself to make a set of 20 + Pfeil style handles for a > woodworking friend using my recently acquired Legacy REVO ornamental mill. > For decades I've wanted an LOM to be able to do precise work like this. > Osage orange is notoriously difficult to machine cleanly either by hand or > under power. So the challenge is tall. I'm really impressed with the clean > accuracy of this process. I'm using a 1/2" upcut spiral bit in the router. > Starting with 1 3/8" x 7 3/4" octagon blanks cut on table saw, there is > still a lot of material for a router to remove, especially on first facet. > It takes two passes per facet, the second being a "cleanup" pass to be sure > the template was followed. I have no motor driven feeds, just hand cranks. > The first one took almost 30 minutes from bench to bench, but repetition > without shortcuts has reduced the time to about 10 minutes average. It > cuts through knots and irregular grain as clean as can be. > > DanK > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/aabb15d3-5735-4f09-9d98-47beab748ad2n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/aabb15d3-5735-4f09-9d98-47beab748ad2n%40googlegroups.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEefpFy9QQQhLsQzrPb2qF9UcHZu8TjdJpYV_Mx-Tt%3DHQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEefpFy9QQQhLsQzrPb2qF9UcHZu8TjdJpYV_Mx-Tt%3DHQ%40mail.gmail.com?utm_medium=email_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d8d091%2408a11780%2419e34680%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d8d091%2408a11780%2419e34680%24%40mmnet.com.au?utm_medium=email_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGtfPmww3i0zerHDs6a50cc_YuQx%3Dv%2Bbk1pqkaJR6qk-Q%40mail.gmail.com.
