Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Ian Thomas]

Perhaps it is a “bad sector” on your computer’s hard disk? I would scan the 
disk using Windows – File Explorer, select the C: Drive (that is where most 
Legacy things are hosted), right click, select Properties (bottom item in the 
menu), Tools (tab), and click the Check button.
It is unlikely that the .fdb file would be larger than 2GB – but after in 
Legacy - backup, check/repair – I sometimes also select Compact file.

Ian
Albert Park, Victoria 3206 Australia

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Chris Hill
Sent: Monday, 7 October 2019 10:15 PM
To: Legacy User Group 
Subject: Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

Hi

Legacy support site says We are uncertain as to the causes of "3035: System 
resource exceeded", which is not that useful.

However, there are known issues with Access, which Legacy uses for its 
database, relating to 'System resource exceeded'. One limitation is the size, 
physical, of the .fdb files, which must not exceed 2GB, but would probably 
error if somewhat smaller. I have also seen a fix which involved limiting the 
number of CPUs that Access is using, but I am not aware if that relates to the 
Legacy app or an imbedded part of the system. Part of the problem is that the 
causes are variable which makes it difficult to resolve.

Regards

Chris

-- Original Message --
From: "Alan Thompson" 
mailto:alanthomp...@grapevine.com.au>>
To: LegacyUserGroup@legacyusers.com
Sent: 07/10/2019 10:02:50
Subject: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

Has anyone else had problems with the Check-Repair routine using the latest 
release Legacy 9.0 Build 318.

I repeatedly get a “ Run Time Error ‘3035 System resource exceeded “message at 
Step 65 of 219 of Check-Repair and was wondering if anyone else was 
experiencing similar.

I tried uninstalling Legacy and re-installing (as recommended for this error 
message) and running check-repair on the same Family file but again received 
the same error message.

I also tried exporting my family file to a new Legacy database and running 
Check-Repair on that, again without success.

However, on a different computer (with less resources, ie CPU and Memory, but 
with the same version of Windows 10 with latest updates), I ran check-repair 
using Legacy Version 9.0.0.301 (ie the previous release) on the same family 
files (as above) and check-repair completed successfully in both cases.

Also restored a back-up of my family file taken immediately prior to updating 
to Build 9.0.0.318. Running check repair on this file using Version 9.0.0.318 
again failed at the same point, but successfully completed using 9.0.0.301.

My Family File details:

Number of Individuals: 143931
Number of Families: 44941
Master locations: 20761
Master Sources: 1245
Citations: 759965
Master events: 197212
used by individuals: 196591
used by marriages: 621
Master media items: 73894
times linked: 303918

I have reported this problem to support.

Alan Thompson
Canberra, Australia

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Judy]

Play nice, boys!!


On 10/7/2019 5:12 AM, Ronald Bernier via LegacyUserGroup wrote:
I was unaware that Legacy users were only allowed to post a question 
during certain hours.  This must be a new stipulation. 


Sent from ProtonMail Mobile


On Mon, Oct 7, 2019 at 5:08 AM, Jennie Matheson > wrote:

Not in Australia, Jeanine. This list is worldwide.

On Mon, Oct 7, 2019 at 8:07 PM Jeanine Bailiff > wrote:


It’s 2:05 a.m.!

On Mon, Oct 7, 2019 at 2:03 AM Alan Thompson
mailto:alanthomp...@grapevine.com.au>> wrote:

Has anyone else had problems with the Check-Repair routine
using the latest release Legacy 9.0 Build 318.

I repeatedly get a “ Run Time Error ‘3035 System resource
exceeded “message at Step 65 of 219 of Check-Repair and was
wondering if anyone else was experiencing similar.

I tried uninstalling Legacy and re-installing (as recommended
for this error message) and running check-repair on the same
Family file but again received the same error message.

I also tried exporting my family file to a new Legacy
database and running Check-Repair on that, again without success.

However, on a different computer (with less resources, ie CPU
and Memory, but with the same version of Windows 10 with
latest updates), I ran check-repair using Legacy Version
9.0.0.301 (ie the previous release) on the same family files
(as above) and check-repair completed successfully in both cases.

Also restored a back-up of my family file taken immediately
prior to updating to Build 9.0.0.318. Running check repair on
this file using Version 9.0.0.318 again failed at the same
point, but successfully completed using 9.0.0.301.

My Family File details:

Number of Individuals: 143931

Number of Families: 44941

Master locations: 20761

Master Sources: 1245

Citations: 759965

Master events: 197212

used by individuals: 196591

used by marriages: 621

Master media items: 73894

times linked: 303918

I have reported this problem to support.

Alan Thompson

Canberra, Australia

-- 


LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com

To manage your subscription and unsubscribe
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 


LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com

To manage your subscription and unsubscribe
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/







-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Chris Hill]

Hi

Legacy support site says We are uncertain as to the causes of "3035: 
System resource exceeded", which is not that useful.


However, there are known issues with Access, which Legacy uses for 
its database, relating to 'System resource exceeded'. One limitation is 
the size, physical, of the .fdb files, which must not exceed 2GB, but 
would probably error if somewhat smaller. I have also seen a fix which 
involved limiting the number of CPUs that Access is using, but I am not 
aware if that relates to the Legacy app or an imbedded part of the 
system. Part of the problem is that the causes are variable which makes 
it difficult to resolve.


Regards

Chris

-- Original Message --
From: "Alan Thompson" 
To: LegacyUserGroup@legacyusers.com
Sent: 07/10/2019 10:02:50
Subject: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

Has anyone else had problems with the Check-Repair routine using the 
latest release Legacy 9.0 Build 318.




I repeatedly get a “ Run Time Error ‘3035 System resource exceeded 
“message at Step 65 of 219 of Check-Repair and was wondering if anyone 
else was experiencing similar.




I tried uninstalling Legacy and re-installing (as recommended for this 
error message) and running check-repair on the same Family file but 
again received the same error message.




I also tried exporting my family file to a new Legacy database and 
running Check-Repair on that, again without success.




However, on a different computer (with less resources, ie CPU and 
Memory, but with the same version of Windows 10 with latest updates), I 
ran check-repair using Legacy Version 9.0.0.301 (ie the previous 
release) on the same family files (as above) and check-repair completed 
successfully in both cases.




Also restored a back-up of my family file taken immediately prior to 
updating to Build 9.0.0.318. Running check repair on this file using 
Version 9.0.0.318 again failed at the same point, but successfully 
completed using 9.0.0.301.




My Family File details:



Number of Individuals: 143931

Number of Families: 44941

Master locations: 20761

Master Sources: 1245

Citations: 759965

Master events: 197212

used by individuals: 196591

used by marriages: 621

Master media items: 73894

times linked: 303918



I have reported this problem to support.



Alan Thompson

Canberra, Australia


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Brian Kelly]

I have not had any problems with my file in Build 318 but mine is much 
smaller than yours.
Sorry, original message has a mix of your details and mine. Here are 
correct numbers from my file:


My Family File details:
Number of Individuals: 6960
Number of Families: 2321
Master locations: 1618
Master Sources: 674
Citations: 39258
Master events: 14332
used by individuals: 14233
used by marriages: 99
Master media items: 2988
times linked: 17011

One thing you might try, if you have not already done so, is to run 
check repair on the file using 318 after it was run successfully using 301.


Brian Kelly

On 07-Oct.-19 5:02 a.m., Alan Thompson wrote:
Has anyone else had problems with the Check-Repair routine using the 
latest release Legacy 9.0 Build 318.


I repeatedly get a “ Run Time Error ‘3035 System resource exceeded 
“message at Step 65 of 219 of Check-Repair and was wondering if anyone 
else was experiencing similar.


I tried uninstalling Legacy and re-installing (as recommended for this 
error message) and running check-repair on the same Family file but 
again received the same error message.


I also tried exporting my family file to a new Legacy database and 
running Check-Repair on that, again without success.


However, on a different computer (with less resources, ie CPU and 
Memory, but with the same version of Windows 10 with latest updates), I 
ran check-repair using Legacy Version 9.0.0.301 (ie the previous 
release) on the same family files (as above) and check-repair completed 
successfully in both cases.


Also restored a back-up of my family file taken immediately prior to 
updating to Build 9.0.0.318. Running check repair on this file using 
Version 9.0.0.318 again failed at the same point, but successfully 
completed using 9.0.0.301.


My Family File details:

Number of Individuals: 143931

Number of Families: 44941

Master locations: 20761

Master Sources: 1245

Citations: 759965

Master events: 197212

used by individuals: 196591

used by marriages: 621

Master media items: 73894

times linked: 303918

I have reported this problem to support.

Alan Thompson

Canberra, Australia




--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Brian Kelly]

I have not had any problems with my file in Build 318 but mine is much 
smaller than yours.


My Family File details:
Number of Individuals: 143931
Number of Families: 6960
Master locations: 1618
Master Sources: 674
Citations: 39258
Master events: 14332
used by individuals: 14233
used by marriages: 99
Master media items: 2988
times linked: 17011

One thing you might try, if you have not already done so, is to run 
check repair on the file using 318 after it was run successfully using 301.


Brian Kelly

On 07-Oct.-19 5:02 a.m., Alan Thompson wrote:
Has anyone else had problems with the Check-Repair routine using the 
latest release Legacy 9.0 Build 318.


I repeatedly get a “ Run Time Error ‘3035 System resource exceeded 
“message at Step 65 of 219 of Check-Repair and was wondering if anyone 
else was experiencing similar.


I tried uninstalling Legacy and re-installing (as recommended for this 
error message) and running check-repair on the same Family file but 
again received the same error message.


I also tried exporting my family file to a new Legacy database and 
running Check-Repair on that, again without success.


However, on a different computer (with less resources, ie CPU and 
Memory, but with the same version of Windows 10 with latest updates), I 
ran check-repair using Legacy Version 9.0.0.301 (ie the previous 
release) on the same family files (as above) and check-repair completed 
successfully in both cases.


Also restored a back-up of my family file taken immediately prior to 
updating to Build 9.0.0.318. Running check repair on this file using 
Version 9.0.0.318 again failed at the same point, but successfully 
completed using 9.0.0.301.


My Family File details:

Number of Individuals: 143931

Number of Families: 44941

Master locations: 20761

Master Sources: 1245

Citations: 759965

Master events: 197212

used by individuals: 196591

used by marriages: 621

Master media items: 73894

times linked: 303918

I have reported this problem to support.

Alan Thompson

Canberra, Australia




--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Ronald Bernier via LegacyUserGroup]

I was unaware that Legacy users were only allowed to post a question during 
certain hours.  This must be a new stipulation. 

Sent from ProtonMail Mobile

On Mon, Oct 7, 2019 at 5:08 AM, Jennie Matheson  wrote:

> Not in Australia, Jeanine. This list is worldwide.
>
> On Mon, Oct 7, 2019 at 8:07 PM Jeanine Bailiff  wrote:
>
>> It’s 2:05 a.m.!
>>
>> On Mon, Oct 7, 2019 at 2:03 AM Alan Thompson  
>> wrote:
>>
>>> Has anyone else had problems with the Check-Repair routine using the latest 
>>> release Legacy 9.0 Build 318.
>>>
>>> I repeatedly get a “ Run Time Error ‘3035 System resource exceeded “message 
>>> at Step 65 of 219 of Check-Repair and was wondering if anyone else was 
>>> experiencing similar.
>>>
>>> I tried uninstalling Legacy and re-installing (as recommended for this 
>>> error message) and running check-repair on the same Family file but again 
>>> received the same error message.
>>>
>>> I also tried exporting my family file to a new Legacy database and running 
>>> Check-Repair on that, again without success.
>>>
>>> However, on a different computer (with less resources, ie CPU and Memory, 
>>> but with the same version of Windows 10 with latest updates), I ran 
>>> check-repair using Legacy Version 9.0.0.301 (ie the previous release) on 
>>> the same family files (as above) and check-repair completed successfully in 
>>> both cases.
>>>
>>> Also restored a back-up of my family file taken immediately prior to 
>>> updating to Build 9.0.0.318. Running check repair on this file using 
>>> Version 9.0.0.318 again failed at the same point, but successfully 
>>> completed using 9.0.0.301.
>>>
>>> My Family File details:
>>>
>>> Number of Individuals: 143931
>>>
>>> Number of Families: 44941
>>>
>>> Master locations: 20761
>>>
>>> Master Sources: 1245
>>>
>>> Citations: 759965
>>>
>>> Master events: 197212
>>>
>>> used by individuals: 196591
>>>
>>> used by marriages: 621
>>>
>>> Master media items: 73894
>>>
>>> times linked: 303918
>>>
>>> I have reported this problem to support.
>>>
>>> Alan Thompson
>>>
>>> Canberra, Australia
>>>
>>> --
>>>
>>> LegacyUserGroup mailing list
>>> LegacyUserGroup@legacyusers.com
>>> To manage your subscription and unsubscribe 
>>> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
>>> Archives at:
>>> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>>
>> --
>>
>> LegacyUserGroup mailing list
>> LegacyUserGroup@legacyusers.com
>> To manage your subscription and unsubscribe 
>> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
>> Archives at:
>> http://www.mail-archive.com/legacyusergroup@legacyusers.com/-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Jennie Matheson]

Not in Australia, Jeanine. This list is worldwide.

On Mon, Oct 7, 2019 at 8:07 PM Jeanine Bailiff  wrote:

> It’s 2:05 a.m.!
>
> On Mon, Oct 7, 2019 at 2:03 AM Alan Thompson <
> alanthomp...@grapevine.com.au> wrote:
>
>> Has anyone else had problems with the Check-Repair routine using the
>> latest release Legacy 9.0 Build 318.
>>
>>
>>
>> I repeatedly get a “ Run Time Error ‘3035 System resource exceeded
>> “message at Step 65 of 219 of Check-Repair and was wondering if anyone else
>> was experiencing similar.
>>
>>
>>
>> I tried uninstalling Legacy and re-installing (as recommended for this
>> error message) and running check-repair on the same Family file but again
>> received the same error message.
>>
>>
>>
>> I also tried exporting my family file to a new Legacy database and
>> running Check-Repair on that, again without success.
>>
>>
>>
>> However, on a different computer (with less resources, ie CPU and Memory,
>> but with the same version of Windows 10 with latest updates), I ran
>> check-repair using Legacy Version 9.0.0.301 (ie the previous release) on
>> the same family files (as above) and check-repair completed successfully in
>> both cases.
>>
>>
>>
>> Also restored a back-up of my family file taken immediately prior to
>> updating to Build 9.0.0.318. Running check repair on this file using
>> Version 9.0.0.318 again failed at the same point, but successfully
>> completed using 9.0.0.301.
>>
>>
>>
>> My Family File details:
>>
>>
>>
>> Number of Individuals: 143931
>>
>> Number of Families: 44941
>>
>> Master locations: 20761
>>
>> Master Sources: 1245
>>
>> Citations: 759965
>>
>> Master events: 197212
>>
>> used by individuals: 196591
>>
>> used by marriages: 621
>>
>> Master media items: 73894
>>
>> times linked: 303918
>>
>>
>>
>> I have reported this problem to support.
>>
>>
>>
>> Alan Thompson
>>
>> Canberra, Australia
>>
>>
>> --
>>
>> LegacyUserGroup mailing list
>> LegacyUserGroup@legacyusers.com
>> To manage your subscription and unsubscribe
>> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
>> Archives at:
>> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Jeanine Bailiff]

It’s 2:05 a.m.!

On Mon, Oct 7, 2019 at 2:03 AM Alan Thompson 
wrote:

> Has anyone else had problems with the Check-Repair routine using the
> latest release Legacy 9.0 Build 318.
>
>
>
> I repeatedly get a “ Run Time Error ‘3035 System resource exceeded
> “message at Step 65 of 219 of Check-Repair and was wondering if anyone else
> was experiencing similar.
>
>
>
> I tried uninstalling Legacy and re-installing (as recommended for this
> error message) and running check-repair on the same Family file but again
> received the same error message.
>
>
>
> I also tried exporting my family file to a new Legacy database and running
> Check-Repair on that, again without success.
>
>
>
> However, on a different computer (with less resources, ie CPU and Memory,
> but with the same version of Windows 10 with latest updates), I ran
> check-repair using Legacy Version 9.0.0.301 (ie the previous release) on
> the same family files (as above) and check-repair completed successfully in
> both cases.
>
>
>
> Also restored a back-up of my family file taken immediately prior to
> updating to Build 9.0.0.318. Running check repair on this file using
> Version 9.0.0.318 again failed at the same point, but successfully
> completed using 9.0.0.301.
>
>
>
> My Family File details:
>
>
>
> Number of Individuals: 143931
>
> Number of Families: 44941
>
> Master locations: 20761
>
> Master Sources: 1245
>
> Citations: 759965
>
> Master events: 197212
>
> used by individuals: 196591
>
> used by marriages: 621
>
> Master media items: 73894
>
> times linked: 303918
>
>
>
> I have reported this problem to support.
>
>
>
> Alan Thompson
>
> Canberra, Australia
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Error 3035 during Check-Repair Build 9.0.0.318

[Alan Thompson]

Has anyone else had problems with the Check-Repair routine using the latest
release Legacy 9.0 Build 318.

 

I repeatedly get a " Run Time Error '3035 System resource exceeded "message
at Step 65 of 219 of Check-Repair and was wondering if anyone else was
experiencing similar.

 

I tried uninstalling Legacy and re-installing (as recommended for this error
message) and running check-repair on the same Family file but again received
the same error message.

 

I also tried exporting my family file to a new Legacy database and running
Check-Repair on that, again without success.

 

However, on a different computer (with less resources, ie CPU and Memory,
but with the same version of Windows 10 with latest updates), I ran
check-repair using Legacy Version 9.0.0.301 (ie the previous release) on the
same family files (as above) and check-repair completed successfully in both
cases.

 

Also restored a back-up of my family file taken immediately prior to
updating to Build 9.0.0.318. Running check repair on this file using Version
9.0.0.318 again failed at the same point, but successfully completed using
9.0.0.301.

 

My Family File details:

 

Number of Individuals: 143931

Number of Families: 44941

Master locations: 20761

Master Sources: 1245

Citations: 759965

Master events: 197212

used by individuals: 196591

used by marriages: 621

Master media items: 73894

times linked: 303918

 

I have reported this problem to support.

 

Alan Thompson

Canberra, Australia

 

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/