I got burned (literally) with this before. I started putting brother labels on
power supplies and matching devices as a result. Luckily, I have very few of
these devices left to deal with. I ended up getting one of those devices where
you slide the drive in vertically and as long as it is a SATA drive, I’m good.
I have kept one USB to PATA for the occasion where I might have to try to read
an older drive. Cuts down on problems immensely.
Cheers,
Scott
> On Dec 8, 2016, at 12:25 PM, J C Nash wrote:
>
> I have several external 3.5" drives. Usually old ones from decommissioned
> machines. I've bought cases for them
> over the years. Happened to be cleaning up a disk today. Grabbed power block
> from where they are kept on shelf and
> ... SMOKE!
>
> Drive OK on separate test out of case, but I'm tossing the enclosure. VERY
> fine print on the power
> block shows the 6 pin mini-DIN has 2 5V pins at 3 o'clock, GND at 6, 12 V at
> 9. But there was another block --
> and in German "nur fur ..." that had GND and 12 switched. It has only a 2 pin
> 110V plug, and I recall too late
> it was the one for this case. Sigh.
>
> Of course, the socket on none of the enclosures is marked with pinouts.
>
> Anyway, a word of caution if you have more than one of these.
>
> JN
> ___
> Linux mailing list
> Linux@lists.oclug.on.ca
> http://oclug.on.ca/mailman/listinfo/linux
--
Scott Murphy, CISSP
Principal Consultant | Arrow-Eye Consulting Inc.
112 Springcreek Cres. | Kanata | ON | K2M 2K8 | Canada
C: 613-769-9363 | GPG: A8DC6128C3A0E110
email: scott.mur...@arrow-eye.com | web: http://www.arrow-eye.com
___
Linux mailing list
Linux@lists.oclug.on.ca
http://oclug.on.ca/mailman/listinfo/linux