Redhat zlinux error with CCW
Hi I was able to load the redhat exec using LNXADMIN and I am receiving the error as Dracut - initqueueY806 : Warning : Could not bring interface enccw0.0.0600 up !. Is there any modifications to be done to lnxmaint ? Regards Jake -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Redhat zlinux error with CCW
Jake, LNXADMIN is a virtual machine designed to run CMS. It's main purpose is to populate it's 192 minidisk to become the 191 disk - read/only to all Linux virtual machines. It seems like you're trying to boot a Linux on LNXADMIN. -Mike MacIsaac On Tue, Oct 16, 2018 at 5:56 AM Jake Anderson wrote: > Hi > > I was able to load the redhat exec using LNXADMIN and I am receiving the > error as > > Dracut - initqueueY806 : Warning : Could not bring interface enccw0.0.0600 > up !. > > > Is there any modifications to be done to lnxmaint ? > > Regards > Jake > > -- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > -- -Mike MacIsaac -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Redhat zlinux error with CCW
Hi Mike I found that I haven't added NICDEF to the LNXDFLT and LNXMAINT After adding it has started working On Tue 16 Oct, 2018, 2:58 PM Michael MacIsaac, wrote: > Jake, > > LNXADMIN is a virtual machine designed to run CMS. It's main purpose is to > populate it's 192 minidisk to become the 191 disk - read/only to all Linux > virtual machines. > > It seems like you're trying to boot a Linux on LNXADMIN. > >-Mike MacIsaac > > On Tue, Oct 16, 2018 at 5:56 AM Jake Anderson > wrote: > > > Hi > > > > I was able to load the redhat exec using LNXADMIN and I am receiving the > > error as > > > > Dracut - initqueueY806 : Warning : Could not bring interface > enccw0.0.0600 > > up !. > > > > > > Is there any modifications to be done to lnxmaint ? > > > > Regards > > Jake > > > > -- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > -- > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ > > > > > -- > -Mike MacIsaac > > -- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Problems with upgrade to z/vm
I attempted to post this to the ibmvm list but have had some problems subscribing to that list so I am hoping that someone here can help. I have used the “upgrade” path to upgrade from 6.3 to 6.4 and have started stage 2 using “instupgr stage2 (commit”. There were instructions to shut down non-essential VMs and unfirtunately I shut down the file pool server VMSYSP. instupgr now fails because it needs that fileserv. After some messing about I re-ipled z/vm and logged on to MIGMAINT again but it cannot start CMS because a saved segment is missing. The backout is to restore from the backup taken before stage2 (it is a flashcopy taken with DFDSS using CPVOLUME option which I understood to have been tested as part of DR but I found out that a different VM is used for DR. I have DDR backups from before stage1 which are over a week old so I would prefer to fix the problem if possible. Keith Gooding -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: Problems with upgrade to z/vm
Keith, Try IPL 190 instead of IPL CMS. Dennis L. O’Brien Vice President Consultant II, z/VM Engineering Technology Engineering & Operations Bank of America CA4-704-06-15, 2000 Clayton Rd, Concord, CA 94520 Dennis.L.O’br...@bankofamerica.com -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Keith Gooding Sent: Tuesday, October 16, 2018 13:08 To: LINUX-390@VM.MARIST.EDU Subject: Problems with upgrade to z/vm I attempted to post this to the ibmvm list but have had some problems subscribing to that list so I am hoping that someone here can help. I have used the “upgrade” path to upgrade from 6.3 to 6.4 and have started stage 2 using “instupgr stage2 (commit”. There were instructions to shut down non-essential VMs and unfirtunately I shut down the file pool server VMSYSP. instupgr now fails because it needs that fileserv. After some messing about I re-ipled z/vm and logged on to MIGMAINT again but it cannot start CMS because a saved segment is missing. The backout is to restore from the backup taken before stage2 (it is a flashcopy taken with DFDSS using CPVOLUME option which I understood to have been tested as part of DR but I found out that a different VM is used for DR. I have DDR backups from before stage1 which are over a week old so I would prefer to fix the problem if possible. Keith Gooding -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390&d=DwIFaQ&c=SFszdw3oxIkTvaP4xmzq_apLU3uL-3SxdAPNkldf__Q&r=YjdXFsYwJ4HEj6o-pUp8xumQus2UJEtFNhPEIMAdx7b8RVzYjxKSlDO03Niwnd7q&m=n-tf0Ra2priXuntv85JQ8OK8xVxZHekiv2Va1WigH78&s=p4DdSVhg8RMEpJX5GRt59AGrjf00ajBL3-eBNQHj_m0&e= -- For more information on Linux on System z, visit https://urldefense.proofpoint.com/v2/url?u=http-3A__wiki.linuxvm.org_&d=DwIFaQ&c=SFszdw3oxIkTvaP4xmzq_apLU3uL-3SxdAPNkldf__Q&r=YjdXFsYwJ4HEj6o-pUp8xumQus2UJEtFNhPEIMAdx7b8RVzYjxKSlDO03Niwnd7q&m=n-tf0Ra2priXuntv85JQ8OK8xVxZHekiv2Va1WigH78&s=hgp3ueGAyTSNwUagWf0KQwnSU1OOkfexRvrtsTfVPy0&e= -- This message, and any attachments, is for the intended recipient(s) only, may contain information that is privileged, confidential and/or proprietary and subject to important terms and conditions available at http://www.bankofamerica.com/emaildisclaimer. If you are not the intended recipient, please delete this message. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
