Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nathan Faust Sent: Wednesday, September 05, 2007 2:17 PM To: Michael Krufky Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) -Original Message- From: Michael Krufky [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 05, 2007 2:07 PM To: Nathan Faust Cc: CityK; linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) -Original Message- From: CityK [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 05, 2007 1:33 PM To: Nathan Faust Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) Nathan Faust wrote: Hi, I've notice the same thing with my Kworld ATSC-110. I'm running Ubuntu 7.10, 2.6.22-10-generic, x86_64. I guess it is a change in the 2.6.22 kernel. Is there anyway to change this back so that QAM and NTSC inputs are the same? They should be the same now -- that was what the change was all about. By default now, the top RF input should be 8VSB and the bottom should be QAM analog (both ota and cable). Nathan Faust wrote: CityK, Thanks for your reply, but that is not what I'm seeing in MythTV and TVTime for /dev/video0. I'm getting signal from /dev/video0 when I use the upper input, not the lower one. I haven't trying tuning 8VSB, but as for the QAM input, that seems to be working as expected. Maybe I should look at the driver config for input select in SAA7134 or swap the input selection lines for VSB and QAM in the dvb code? After looking at the input selection code in nxt200x.c, QAM and VSB, it looks like if I switch these lines it will swap the inputs. //QAM - state-config-set_pll_input(buf+1, 1); + state-config-set_pll_input(buf+1, 0); //VSB - state-config-set_pll_input(buf+1, 0); + state-config-set_pll_input(buf+1, 1); Am I correct? I am confused as to what these lines do if (state-config-set_ts_params) state-config-set_ts_params(fe, 1); -- what the front-end parameter 0 or 1 mean. Nathan, Please do not top-quote As per your description above, you are correct... HOWEVER, now I understand your issue -- you are running old code. If you update to the latest v4l/dvb modules via linuxtv.org mercurial, you will find that functionality has been restored as per your desire. Please see http://linuxtv.org/repo ...for instructions to upgrade your v4l/dvb modules. Good Luck, Mike Mike, I've been using the stock Ubuntu 7.10 kernel (2.6.22.4) with just the Kworld ATSC-110 remote additions. I'll give that a try and get back if I continue to have problems. As for top quoting, sorry about that. Thank you, Nathan. --- Mike, I'm working on compiling the current v4l-dvb kernel modules (v4l-dvb-0c3e99a3f31c). Do you know if the Kworld ATSC-110 remote patch is merged into the code or do I need to run the patch, http://www.mythtv.org/wiki/index.php/User:Vprada#Kernel_Modification ? I couldn't find any mention of the remote code in the source, assuming that it needs patching still. Thank you, Nathan. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
Hi, I've notice the same thing with my Kworld ATSC-110. I'm running Ubuntu 7.10, 2.6.22-10-generic, x86_64. I guess it is a change in the 2.6.22 kernel. Is there anyway to change this back so that QAM and NTSC inputs are the same? Thank you, Nathan. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Sandeen Sent: Saturday, August 25, 2007 7:29 PM To: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) Eric Sandeen wrote: hi, I have a Kworld ATSC 110 PCI DVB card, 03:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev f0) Subsystem: KWorld Computer Co. Ltd. ATSC 110 Digital / Analog HDTV Tuner Flags: bus master, medium devsel, latency 55, IRQ 23 Memory at c4001000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 It seems this fairly recent mod broke my ability to tune in QAM HDTV: --- http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=com mitdiff;h=f5ae29e284b328e0976789d5c199bbbe80e4b005 [PATCH] cx88-dvb: fix nxt200x rf input switching Michael Krufky [Sat, 24 Mar 2007 17:21:53 + (13:21 -0400)] After dvb tuner refactoring, the pllbuff has been altered such that the pll address is now stored in buf[0]. Instead of sending buf to set_pll_input, we should send buf+1. --- Ok, after much patient assistance from mkrufky, we sorted out that a recent change meant that I had to switch physical inputs on my card - that is, plugging the physical cable into the *other* card input (the input closer to the center of pci card bracket) - makes everything happy again... Thanks, -Eric ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
Nathan Faust wrote: Hi, I've notice the same thing with my Kworld ATSC-110. I'm running Ubuntu 7.10, 2.6.22-10-generic, x86_64. I guess it is a change in the 2.6.22 kernel. Is there anyway to change this back so that QAM and NTSC inputs are the same? They should be the same now -- that was what the change was all about. By default now, the top RF input should be 8VSB and the bottom should be QAM analog (both ota and cable). ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
CityK, Thanks for your reply, but that is not what I'm seeing in MythTV and TVTime for /dev/video0. I'm getting signal from /dev/video0 when I use the upper input, not the lower one. I haven't trying tuning 8VSB, but as for the QAM input, that seems to be working as expected. Maybe I should look at the driver config for input select in SAA7134 or swap the input selection lines for VSB and QAM in the dvb code? After looking at the input selection code in nxt200x.c, QAM and VSB, it looks like if I switch these lines it will swap the inputs. //QAM - state-config-set_pll_input(buf+1, 1); + state-config-set_pll_input(buf+1, 0); //VSB - state-config-set_pll_input(buf+1, 0); + state-config-set_pll_input(buf+1, 1); Am I correct? I am confused as to what these lines do if (state-config-set_ts_params) state-config-set_ts_params(fe, 1); -- what the front-end parameter 0 or 1 mean. Thank you, Nathan. -Original Message- From: CityK [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 05, 2007 1:33 PM To: Nathan Faust Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) Nathan Faust wrote: Hi, I've notice the same thing with my Kworld ATSC-110. I'm running Ubuntu 7.10, 2.6.22-10-generic, x86_64. I guess it is a change in the 2.6.22 kernel. Is there anyway to change this back so that QAM and NTSC inputs are the same? They should be the same now -- that was what the change was all about. By default now, the top RF input should be 8VSB and the bottom should be QAM analog (both ota and cable). ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
-Original Message- From: CityK [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 05, 2007 1:33 PM To: Nathan Faust Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) Nathan Faust wrote: Hi, I've notice the same thing with my Kworld ATSC-110. I'm running Ubuntu 7.10, 2.6.22-10-generic, x86_64. I guess it is a change in the 2.6.22 kernel. Is there anyway to change this back so that QAM and NTSC inputs are the same? They should be the same now -- that was what the change was all about. By default now, the top RF input should be 8VSB and the bottom should be QAM analog (both ota and cable). Nathan Faust wrote: CityK, Thanks for your reply, but that is not what I'm seeing in MythTV and TVTime for /dev/video0. I'm getting signal from /dev/video0 when I use the upper input, not the lower one. I haven't trying tuning 8VSB, but as for the QAM input, that seems to be working as expected. Maybe I should look at the driver config for input select in SAA7134 or swap the input selection lines for VSB and QAM in the dvb code? After looking at the input selection code in nxt200x.c, QAM and VSB, it looks like if I switch these lines it will swap the inputs. //QAM - state-config-set_pll_input(buf+1, 1); + state-config-set_pll_input(buf+1, 0); //VSB - state-config-set_pll_input(buf+1, 0); + state-config-set_pll_input(buf+1, 1); Am I correct? I am confused as to what these lines do if (state-config-set_ts_params) state-config-set_ts_params(fe, 1); -- what the front-end parameter 0 or 1 mean. Nathan, Please do not top-quote As per your description above, you are correct... HOWEVER, now I understand your issue -- you are running old code. If you update to the latest v4l/dvb modules via linuxtv.org mercurial, you will find that functionality has been restored as per your desire. Please see http://linuxtv.org/repo ...for instructions to upgrade your v4l/dvb modules. Good Luck, Mike ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
-Original Message- From: Michael Krufky [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 05, 2007 2:07 PM To: Nathan Faust Cc: CityK; linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) -Original Message- From: CityK [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 05, 2007 1:33 PM To: Nathan Faust Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :) Nathan Faust wrote: Hi, I've notice the same thing with my Kworld ATSC-110. I'm running Ubuntu 7.10, 2.6.22-10-generic, x86_64. I guess it is a change in the 2.6.22 kernel. Is there anyway to change this back so that QAM and NTSC inputs are the same? They should be the same now -- that was what the change was all about. By default now, the top RF input should be 8VSB and the bottom should be QAM analog (both ota and cable). Nathan Faust wrote: CityK, Thanks for your reply, but that is not what I'm seeing in MythTV and TVTime for /dev/video0. I'm getting signal from /dev/video0 when I use the upper input, not the lower one. I haven't trying tuning 8VSB, but as for the QAM input, that seems to be working as expected. Maybe I should look at the driver config for input select in SAA7134 or swap the input selection lines for VSB and QAM in the dvb code? After looking at the input selection code in nxt200x.c, QAM and VSB, it looks like if I switch these lines it will swap the inputs. //QAM - state-config-set_pll_input(buf+1, 1); + state-config-set_pll_input(buf+1, 0); //VSB - state-config-set_pll_input(buf+1, 0); + state-config-set_pll_input(buf+1, 1); Am I correct? I am confused as to what these lines do if (state-config-set_ts_params) state-config-set_ts_params(fe, 1); -- what the front-end parameter 0 or 1 mean. Nathan, Please do not top-quote As per your description above, you are correct... HOWEVER, now I understand your issue -- you are running old code. If you update to the latest v4l/dvb modules via linuxtv.org mercurial, you will find that functionality has been restored as per your desire. Please see http://linuxtv.org/repo ...for instructions to upgrade your v4l/dvb modules. Good Luck, Mike Mike, I've been using the stock Ubuntu 7.10 kernel (2.6.22.4) with just the Kworld ATSC-110 remote additions. I'll give that a try and get back if I continue to have problems. As for top quoting, sorry about that. Thank you, Nathan. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
Eric Sandeen wrote: hi, I have a Kworld ATSC 110 PCI DVB card, 03:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev f0) Subsystem: KWorld Computer Co. Ltd. ATSC 110 Digital / Analog HDTV Tuner Flags: bus master, medium devsel, latency 55, IRQ 23 Memory at c4001000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 It seems this fairly recent mod broke my ability to tune in QAM HDTV: --- http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=f5ae29e284b328e0976789d5c199bbbe80e4b005 [PATCH] cx88-dvb: fix nxt200x rf input switching Michael Krufky [Sat, 24 Mar 2007 17:21:53 + (13:21 -0400)] After dvb tuner refactoring, the pllbuff has been altered such that the pll address is now stored in buf[0]. Instead of sending buf to set_pll_input, we should send buf+1. --- Ok, after much patient assistance from mkrufky, we sorted out that a recent change meant that I had to switch physical inputs on my card - that is, plugging the physical cable into the *other* card input (the input closer to the center of pci card bracket) - makes everything happy again... Thanks, -Eric ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] cx88-dvb: fix nxt200x rf input switching broke my tuner? :)
hi, I have a Kworld ATSC 110 PCI DVB card, 03:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev f0) Subsystem: KWorld Computer Co. Ltd. ATSC 110 Digital / Analog HDTV Tuner Flags: bus master, medium devsel, latency 55, IRQ 23 Memory at c4001000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 It seems this fairly recent mod broke my ability to tune in QAM HDTV: --- http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=f5ae29e284b328e0976789d5c199bbbe80e4b005 [PATCH] cx88-dvb: fix nxt200x rf input switching Michael Krufky [Sat, 24 Mar 2007 17:21:53 + (13:21 -0400)] After dvb tuner refactoring, the pllbuff has been altered such that the pll address is now stored in buf[0]. Instead of sending buf to set_pll_input, we should send buf+1. --- .. at least on my fedora kernel, 2.6.22.2-42.fc6 Reverting that change allows me to tune in HDTV programs again. Also when that patch was in place, I got these messages: Aug 24 22:28:10 mythbox kernel: nxt200x: NXT2004 Detected Aug 24 22:28:10 mythbox kernel: nxt200x: Timeout waiting for nxt2004 to init. Aug 24 22:29:18 mythbox kernel: nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -5) Aug 24 22:29:18 mythbox kernel: nxt200x: nxt200x_writebytes: i2c write error (addr 0x0a, err == -5) I see a few more changes are still in git, and I haven't been able to test 2.6.23-rcX yet, but thought I'd report this for now . If there is any more info or testing I can provide, please let me know. Thanks! -Eric ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb