Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
Hello. On 9/23/2016 3:13 AM, David Miller wrote: Despite my comments? Sigh... Sorry, I thought he had addressed your feedback in v2. IIRC, I had only commented to v2, not v1. I'll wait longer next time. Thank you. :-) MBR, Sergei
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
Hello. On 9/23/2016 3:13 AM, David Miller wrote: Despite my comments? Sigh... Sorry, I thought he had addressed your feedback in v2. IIRC, I had only commented to v2, not v1. I'll wait longer next time. Thank you. :-) MBR, Sergei
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
From: Sergei ShtylyovDate: Thu, 22 Sep 2016 20:08:47 +0300 >Despite my comments? Sigh... Sorry, I thought he had addressed your feedback in v2. I'll wait longer next time.
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
From: Sergei Shtylyov Date: Thu, 22 Sep 2016 20:08:47 +0300 >Despite my comments? Sigh... Sorry, I thought he had addressed your feedback in v2. I'll wait longer next time.
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
Hello. On 09/22/2016 03:22 PM, David Miller wrote: By default, GMAC0 is connected to built-in switch called MT7530 through the proprietary interface called Turbo RGMII (TRGMII). TRGMII also supports well for RGMII as generic external PHY uses but requires some slight changes to the setup of TRGMII and doesn't have well support on current driver. So this patchset 1) provides the slight changes of the setup for RGMII can work through TRGMII 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII about phy-mode on device tree to make GMAC0 distinguish which mode it runs 3) changes dynamically source clock, TX/RX delay and interface mode on TRGMII for adapting various link Changes since v1: - fixed the style of comment which doesn't have a space at the beginning and end of comment lines - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII into linux/phy.h - enhance the Documentation about device tree binding for trgmii which is applicable only for GMAC0 which uses fixed-link Series applied. Despite my comments? Sigh... MBR, Sergei
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
Hello. On 09/22/2016 03:22 PM, David Miller wrote: By default, GMAC0 is connected to built-in switch called MT7530 through the proprietary interface called Turbo RGMII (TRGMII). TRGMII also supports well for RGMII as generic external PHY uses but requires some slight changes to the setup of TRGMII and doesn't have well support on current driver. So this patchset 1) provides the slight changes of the setup for RGMII can work through TRGMII 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII about phy-mode on device tree to make GMAC0 distinguish which mode it runs 3) changes dynamically source clock, TX/RX delay and interface mode on TRGMII for adapting various link Changes since v1: - fixed the style of comment which doesn't have a space at the beginning and end of comment lines - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII into linux/phy.h - enhance the Documentation about device tree binding for trgmii which is applicable only for GMAC0 which uses fixed-link Series applied. Despite my comments? Sigh... MBR, Sergei
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
From:Date: Thu, 22 Sep 2016 10:33:53 +0800 > By default, GMAC0 is connected to built-in switch called > MT7530 through the proprietary interface called Turbo RGMII > (TRGMII). TRGMII also supports well for RGMII as generic external > PHY uses but requires some slight changes to the setup of TRGMII > and doesn't have well support on current driver. > > So this patchset > 1) provides the slight changes of the setup for RGMII can work >through TRGMII > 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII >about phy-mode on device tree to make GMAC0 distinguish which >mode it runs > 3) changes dynamically source clock, TX/RX delay and interface >mode on TRGMII for adapting various link > > Changes since v1: > - fixed the style of comment which doesn't have a space at >the beginning and end of comment lines > - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII >into linux/phy.h > - enhance the Documentation about device tree binding for trgmii > which is applicable only for GMAC0 which uses fixed-link Series applied.
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
From: Date: Thu, 22 Sep 2016 10:33:53 +0800 > By default, GMAC0 is connected to built-in switch called > MT7530 through the proprietary interface called Turbo RGMII > (TRGMII). TRGMII also supports well for RGMII as generic external > PHY uses but requires some slight changes to the setup of TRGMII > and doesn't have well support on current driver. > > So this patchset > 1) provides the slight changes of the setup for RGMII can work >through TRGMII > 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII >about phy-mode on device tree to make GMAC0 distinguish which >mode it runs > 3) changes dynamically source clock, TX/RX delay and interface >mode on TRGMII for adapting various link > > Changes since v1: > - fixed the style of comment which doesn't have a space at >the beginning and end of comment lines > - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII >into linux/phy.h > - enhance the Documentation about device tree binding for trgmii > which is applicable only for GMAC0 which uses fixed-link Series applied.
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
Le 21/09/2016 à 19:33, sean.w...@mediatek.com a écrit : > From: Sean Wang> > By default, GMAC0 is connected to built-in switch called > MT7530 through the proprietary interface called Turbo RGMII > (TRGMII). TRGMII also supports well for RGMII as generic external > PHY uses but requires some slight changes to the setup of TRGMII > and doesn't have well support on current driver. > > So this patchset > 1) provides the slight changes of the setup for RGMII can work >through TRGMII > 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII >about phy-mode on device tree to make GMAC0 distinguish which >mode it runs > 3) changes dynamically source clock, TX/RX delay and interface >mode on TRGMII for adapting various link > > Changes since v1: > - fixed the style of comment which doesn't have a space at >the beginning and end of comment lines > - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII >into linux/phy.h > - enhance the Documentation about device tree binding for trgmii > which is applicable only for GMAC0 which uses fixed-link Looks good to me: Reviewed-by: Florian Fainelli Thanks Sean! -- Florian
Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
Le 21/09/2016 à 19:33, sean.w...@mediatek.com a écrit : > From: Sean Wang > > By default, GMAC0 is connected to built-in switch called > MT7530 through the proprietary interface called Turbo RGMII > (TRGMII). TRGMII also supports well for RGMII as generic external > PHY uses but requires some slight changes to the setup of TRGMII > and doesn't have well support on current driver. > > So this patchset > 1) provides the slight changes of the setup for RGMII can work >through TRGMII > 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII >about phy-mode on device tree to make GMAC0 distinguish which >mode it runs > 3) changes dynamically source clock, TX/RX delay and interface >mode on TRGMII for adapting various link > > Changes since v1: > - fixed the style of comment which doesn't have a space at >the beginning and end of comment lines > - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII >into linux/phy.h > - enhance the Documentation about device tree binding for trgmii > which is applicable only for GMAC0 which uses fixed-link Looks good to me: Reviewed-by: Florian Fainelli Thanks Sean! -- Florian
[PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
From: Sean WangBy default, GMAC0 is connected to built-in switch called MT7530 through the proprietary interface called Turbo RGMII (TRGMII). TRGMII also supports well for RGMII as generic external PHY uses but requires some slight changes to the setup of TRGMII and doesn't have well support on current driver. So this patchset 1) provides the slight changes of the setup for RGMII can work through TRGMII 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII about phy-mode on device tree to make GMAC0 distinguish which mode it runs 3) changes dynamically source clock, TX/RX delay and interface mode on TRGMII for adapting various link Changes since v1: - fixed the style of comment which doesn't have a space at the beginning and end of comment lines - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII into linux/phy.h - enhance the Documentation about device tree binding for trgmii which is applicable only for GMAC0 which uses fixed-link Sean Wang (3): net: ethernet: mediatek: add extension of phy-mode for TRGMII net: ethernet: mediatek: add support for GMAC0 connecting with external PHY through TRGMII net: ethernet: mediatek: add the dts property to set if TRGMII supported on GMAC0 .../devicetree/bindings/net/mediatek-net.txt | 5 +++- drivers/net/ethernet/mediatek/mtk_eth_soc.c| 34 +- drivers/net/ethernet/mediatek/mtk_eth_soc.h| 34 +- include/linux/phy.h| 3 ++ 4 files changed, 73 insertions(+), 3 deletions(-) -- 1.9.1
[PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module
From: Sean Wang By default, GMAC0 is connected to built-in switch called MT7530 through the proprietary interface called Turbo RGMII (TRGMII). TRGMII also supports well for RGMII as generic external PHY uses but requires some slight changes to the setup of TRGMII and doesn't have well support on current driver. So this patchset 1) provides the slight changes of the setup for RGMII can work through TRGMII 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII about phy-mode on device tree to make GMAC0 distinguish which mode it runs 3) changes dynamically source clock, TX/RX delay and interface mode on TRGMII for adapting various link Changes since v1: - fixed the style of comment which doesn't have a space at the beginning and end of comment lines - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII into linux/phy.h - enhance the Documentation about device tree binding for trgmii which is applicable only for GMAC0 which uses fixed-link Sean Wang (3): net: ethernet: mediatek: add extension of phy-mode for TRGMII net: ethernet: mediatek: add support for GMAC0 connecting with external PHY through TRGMII net: ethernet: mediatek: add the dts property to set if TRGMII supported on GMAC0 .../devicetree/bindings/net/mediatek-net.txt | 5 +++- drivers/net/ethernet/mediatek/mtk_eth_soc.c| 34 +- drivers/net/ethernet/mediatek/mtk_eth_soc.h| 34 +- include/linux/phy.h| 3 ++ 4 files changed, 73 insertions(+), 3 deletions(-) -- 1.9.1