Re: Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
On 26.09.09 21:33, Devin Heitmueller wrote:
On Sat, Sep 26, 2009 at 8:23 PM, Uros Vampl mobile.leec...@gmail.com wrote:
On 26.09.09 16:59, Devin Heitmueller wrote:
On Fri, Sep 25, 2009 at 6:10 PM, Uros Vampl mobile.leec...@gmail.com
wrote:
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the
Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the
same. So, like it's there for the Hauppauge, I added .mts_firmware = 1
to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id
.
MTS (4), id 00ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 00010007.
So now with the attached patch, everything (analog, digital, remote)
works!
Regards,
Uroš
Hello Uros,
Please test out the following tree, which has all the relevant fixes
(enabling dvb, your audio fix, proper gpio setting, etc).
http://kernellabs.com/hg/~dheitmueller/misc-fixes2/
If you have any trouble, please let me know. Otherwise I would like
to issue a PULL request for this tree.
Hi,
Your tree does not work, no audio. I quickly found the problem though:
gpio is set to default_analog, but it needs to be set to
hauppauge_wintv_hvr_900_analog. So I guess treating the EM2880 and
EM2882 as the same will not work, because they require different gpio
settings.
Regards,
Uroš
Hmm.. Interesting. That does make me wonder whether the GPIOs are
setup for audio properly on the em2880 version of the profile, or
whether the user in question just never tested it. I'll have to go
back and check the USB trace.
Nonetheless, I'll just check in your version of the patch, and scrap
my version entirely for now. Could you please add your SOB to the
patch?
Thanks,
Devin
Ok, here we go...
Make analog audio, dvb and the remote work on a Terratec Cinergy Hybrid
XS (em2882).
Signed-off-by: Uroš Vampl mobile.leec...@gmail.com
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 19 09:45:22
2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 26 00:06:37
2009 +0200
@@ -1441,11 +1441,12 @@
.valid= EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
.decoder = EM28XX_TVP5150,
-#if 0 /* FIXME: add an entry at em28xx-dvb */
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
-#endif
+ .ir_codes = ir_codes_terratec_cinergy_xs_table,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input= { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -2119,6 +2120,7 @@
switch (dev-model) {
case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
ctl-demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-dvb.c
--- a/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 19 09:45:22
2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 26 00:06:37
2009 +0200
@@ -494,6 +494,7 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb-frontend = dvb_attach(zl10353_attach,
em28xx_zl10353_xc3028_no_i2c_gate,
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
On 26.09.09 16:59, Devin Heitmueller wrote: On Fri, Sep 25, 2009 at 6:10 PM, Uros Vampl mobile.leec...@gmail.com wrote: Alright, success!!! Since it seems everything for this tuner is set up the same as for the Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the same. So, like it's there for the Hauppauge, I added .mts_firmware = 1 to the definition of the hybrid XS em2882. And well, working TV audio!! dmesg output this time: xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id . MTS (4), id 00ff: xc2028 4-0061: Loading firmware for type=MTS (4), id 00010007. So now with the attached patch, everything (analog, digital, remote) works! Regards, Uroš Hello Uros, Please test out the following tree, which has all the relevant fixes (enabling dvb, your audio fix, proper gpio setting, etc). http://kernellabs.com/hg/~dheitmueller/misc-fixes2/ If you have any trouble, please let me know. Otherwise I would like to issue a PULL request for this tree. Hi, Your tree does not work, no audio. I quickly found the problem though: gpio is set to default_analog, but it needs to be set to hauppauge_wintv_hvr_900_analog. So I guess treating the EM2880 and EM2882 as the same will not work, because they require different gpio settings. Regards, Uroš -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
On 25.09.09 20:22, Uros Vampl wrote:
On 25.09.09 13:41, Devin Heitmueller wrote:
Interesting. Have you tried the A/V inputs (as opposed to the tuner)?
That might help us identify whether it's an issue with the xc3028
tuner chip extracting the audio carrier or whether it's something
about the way we are programming the emp202.
Hello,
That was a great idea. Tested with a Playstation2 and audio is ok. It's
just TV input that has a problem. So I guess that means the issue is
with the tuner chip. That's progress. Where do I go from here?
Ok, that's good to hear. What video standard specifically are you
using? I suspect the core issue is that the application is not
properly specifying the video standard, which results in the xc3028
improperly decoding the audio (the xc3028 needs to know exactly what
standard is being used).
I'm from Slovenia, which is a PAL-B country. Tvtime can be set to either
PAL-BG, PAL-DK or PAL-I, makes no difference. MPlayer has a whole bunch
of options (PAL, PAL-BG, etc...), but again none of them make a
difference.
When the app is started, this appears in dmesg:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id .
(0), id 00ff:
xc2028 4-0061: Loading firmware for type=(0), id 00010007.
xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id
000f0007.
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the
Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the
same. So, like it's there for the Hauppauge, I added .mts_firmware = 1
to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id
.
MTS (4), id 00ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 00010007.
So now with the attached patch, everything (analog, digital, remote)
works!
Regards,
Uroš
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 19 09:45:22
2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 26 00:06:37
2009 +0200
@@ -1441,11 +1441,12 @@
.valid= EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
.decoder = EM28XX_TVP5150,
-#if 0 /* FIXME: add an entry at em28xx-dvb */
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
-#endif
+ .ir_codes = ir_codes_terratec_cinergy_xs_table,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input= { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -2119,6 +2120,7 @@
switch (dev-model) {
case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
ctl-demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-dvb.c
--- a/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 19 09:45:22
2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 26 00:06:37
2009 +0200
@@ -494,6 +494,7 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb-frontend = dvb_attach(zl10353_attach,
em28xx_zl10353_xc3028_no_i2c_gate,
Re: Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
On 21.09.09 18:29, Devin Heitmueller wrote: On Mon, Sep 21, 2009 at 6:15 PM, Uros Vampl mobile.leec...@gmail.com wrote: I tried arecord/aplay and sox with tvtime, and also mplayer (which has built-in audio support). I know about these tricks, I've used them successfully with Markus' em28xx-new driver. But with v4l-dvb it's as I said, audio is there but it's extremely quiet. If you have suggestions how I should try to diagnoze this, I'm all ears. Regards, Uroš If the audio is present but very quiet, then it's probably some issue you are having with your mixer. I would check your ALSA and PulseAudio configuration (in particular the mixer volume controls). Devin No PulseAudio here. And I've played plenty with the ALSA mixer, all the sliders that are there. Using em28xx-new instead of v4l-dvb, all else being equal, tv volume is fine. So there's gotta be a difference somewhere in the way em28xx-new sets up audio compared to how v4l-dvb does it. Regards, Uroš -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
Hello. Partial success. With the attached patch, DVB works. But I have no idea how to get analog audio working correctly. Any help would be appreciated. Regards, Uroš On 13.09.09 21:31, Uros Vampl wrote: Hello. I have the Terratec Cinergy Hybrid T XS USB (em2882) - usb-id 0ccd:005e. It works with Marcus Rechberger's em28xx-new driver, but since that code is unmaintained now, I tested this device with v4l-dvb today. The analog picture is there, but audio is very, very quiet, almost not there. Is there some way to increase the volume? Second question, what would be required to get DVB working? The final thing is not a question, it's actually something that works: the remote. It's the same one as comes with the other Hybrid XS (0ccd:0042), adding these two lines to the definition of this card in em28xx-cards.c makes it work: .ir_codes = ir_codes_terratec_cinergy_xs_table, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, Any pointers to solving my issues (analog audio, dvb) appreciated. I can test patches, I can give ssh access to my machine if it helps. There's even a Windows install on this machine, so USB sniffing of the Windows driver is possible, I just need instructions on what exactly to do. Dmesg output for this device is attached. Regards, Uroš usb 1-4: new high speed USB device using ehci_hcd and address 6 usb 1-4: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0) em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 em28xx #0: i2c eeprom e0: 30 00 36 00 30 00 39 00 30 00 32 00 30 00 31 00 em28xx #0: i2c eeprom f0: 33 00 38 00 34 00 33 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x7713bfbe em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x27, strings=0x409e, 0x1cde, 0x346a em28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55) em28xx #0: em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses) tvp5150 4-005c: chip found @ 0xb8 (em28xx #0) tuner 4-0061: chip found @ 0xc2 (em28xx #0) xc2028 4-0061: creating new instance xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner usb 1-4: firmware: requesting xc3028-v27.fw xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 4-0061: Loading firmware for type=BASE (1), id . xc2028 4-0061: Loading firmware for type=(0), id b700. SCODE (2000), id b700: xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 8000. em28xx #0: Config register raw data: 0xd0 em28xx #0: AC97 vendor ID = 0x em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150 4-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 usbcore: registered new interface driver em28xx em28xx driver loaded em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger Em28xx: Initialized (Em28xx Audio Extension) extension tvp5150 4-005c: tvp5150am1 detected. xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id . xc2028 4-0061: Loading firmware for type=(0), id 00010007. xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 000f0007. diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-cards.c --- a/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 19 09:45:22 2009 -0300 +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
Re: Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
On 21.09.09 16:49, Devin Heitmueller wrote: On Mon, Sep 21, 2009 at 4:44 PM, Uros Vampl mobile.leec...@gmail.com wrote: Hello. Partial success. With the attached patch, DVB works. But I have no idea how to get analog audio working correctly. Any help would be appreciated. Regards, Uroš Hello Uroš, Sorry I somehow missed your previous email. I have a patch already which should make the device work correctly, and am issuing a PULL request for it this week. Regarding the analog audio, I'm not sure how you are testing, but if you are using tvtime, it is known that tvtime does not support analog audio for raw devices such as this. You need to run arecord/aplay in a separate window. Devin Hi, I tried arecord/aplay and sox with tvtime, and also mplayer (which has built-in audio support). I know about these tricks, I've used them successfully with Markus' em28xx-new driver. But with v4l-dvb it's as I said, audio is there but it's extremely quiet. If you have suggestions how I should try to diagnoze this, I'm all ears. Regards, Uroš -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Questions about Terratec Hybrid XS (em2882) [0ccd:005e]
Hello. I have the Terratec Cinergy Hybrid T XS USB (em2882) - usb-id 0ccd:005e. It works with Marcus Rechberger's em28xx-new driver, but since that code is unmaintained now, I tested this device with v4l-dvb today. The analog picture is there, but audio is very, very quiet, almost not there. Is there some way to increase the volume? Second question, what would be required to get DVB working? The final thing is not a question, it's actually something that works: the remote. It's the same one as comes with the other Hybrid XS (0ccd:0042), adding these two lines to the definition of this card in em28xx-cards.c makes it work: .ir_codes = ir_codes_terratec_cinergy_xs_table, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, Any pointers to solving my issues (analog audio, dvb) appreciated. I can test patches, I can give ssh access to my machine if it helps. There's even a Windows install on this machine, so USB sniffing of the Windows driver is possible, I just need instructions on what exactly to do. Dmesg output for this device is attached. Regards, Uroš usb 1-4: new high speed USB device using ehci_hcd and address 6 usb 1-4: configuration #1 chosen from 1 choice Linux video capture interface: v2.00 em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0) em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 em28xx #0: i2c eeprom e0: 30 00 36 00 30 00 39 00 30 00 32 00 30 00 31 00 em28xx #0: i2c eeprom f0: 33 00 38 00 34 00 33 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x7713bfbe em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x27, strings=0x409e, 0x1cde, 0x346a em28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55) em28xx #0: em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses) tvp5150 4-005c: chip found @ 0xb8 (em28xx #0) tuner 4-0061: chip found @ 0xc2 (em28xx #0) xc2028 4-0061: creating new instance xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner usb 1-4: firmware: requesting xc3028-v27.fw xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 4-0061: Loading firmware for type=BASE (1), id . xc2028 4-0061: Loading firmware for type=(0), id b700. SCODE (2000), id b700: xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 8000. em28xx #0: Config register raw data: 0xd0 em28xx #0: AC97 vendor ID = 0x em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150 4-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 usbcore: registered new interface driver em28xx em28xx driver loaded em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger Em28xx: Initialized (Em28xx Audio Extension) extension tvp5150 4-005c: tvp5150am1 detected. xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id . xc2028 4-0061: Loading firmware for type=(0), id 00010007. xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 000f0007.
