Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
Hi, I was in the process of setting up my machine so I can run any of the tests you might ask for. First I needed a fully tested backup partition, and then I needed to bring udev up to date. But I see that the problem is pretty much resolved right now. As Devin said earlier I doubt I can ever reproduce this event. Thanks very much for everything you do for the Linux community. Richard Andy Walls wrote: Yes. But it will take me a while. I don't have a git tree, because I don't have high bandwidth internet yet. (The cable company's been delayed in laying cable to my home due to repeated snowstorms.) I just didn't want the problem to fall through the cracks. I'll submit something to bugzilla for now. If a user complains of this rare Ooops when loading firmware, the current workaround is to lengthen the timeout via sysfs. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Thu, 2010-02-11 at 20:11 -0800, Greg KH wrote: > On Wed, Feb 10, 2010 at 10:34:56AM -0500, Andy Walls wrote: > > On Tue, 2010-02-09 at 22:12 -0500, Devin Heitmueller wrote: > > > On Tue, Feb 9, 2010 at 10:05 PM, Richard Lemieux > > > wrote: > > > > Andy, > > > > > > > > This is a great answer! Thanks very much. When I get into this > > > > situation > > > > again > > > > I will know what to look for. > > > > > > > > A possible reason why I got into this problem in the first place is > > > > that I > > > > tried > > > > many combinations of parameters with mplayer and azap in order to learn > > > > how > > > > to use the USB tuner in both the ATSC and the NTSC mode. I will look > > > > back > > > > in the terminal history to see if I can find anything. > > > > > > I think the key to figuring out the bug at this point is you finding a > > > sequence where you can reliably reproduce the oops. If we have that, > > > then I can start giving you some code to try which we can see if it > > > addresses the problem. > > > > > > For example, I would start by giving you a fix which results in us not > > > calling the firmware release if the request_firmware() call failed, > > > but it wouldn't be much help if you could not definitively tell me if > > > the problem is fixed. > > > > > > For the oops analysis here: > > > > http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/15954 > > > > > > I will also note that the file scope "fw_lock" mutex is rather > > inconsistently used in > > linux/drivers/base/fw_class.c:firmware_loading_store(). (I guess for > > not wanting to consume the timeout interval with sleeping?) > > > > The mutex protects "case 1:", but all other cases appear to be only > > protected by atomic status bit checks that can fall through to > > fw_load_abort() which complete()'s the fw_priv->completion. > > > > Also not that in the _request_firmware() this sequence is the only place > > a once good "fw_priv->fw" pointer is set to NULL: > > > > mutex_lock(&fw_lock); > > if (!fw_priv->fw->size || test_bit(FW_STATUS_ABORT, > > &fw_priv->status)) { > > retval = -ENOENT; > > release_firmware(fw_priv->fw); > > *firmware_p = NULL; > > } > > fw_priv->fw = NULL; <--- The only place it is set > > to NULL > > mutex_unlock(&fw_lock); > > > > > > So if the timeout timer fires at nearly the same time as udev coming in > > and say "I'm done loading" without holding the mutex, one can run into > > the Ooops. Not only that, I think the above code can leak memory under > > some circumstances when the "if" clause is not satisfied. > > > > I think this really is a firmware_class.c issue. I think the "just > > right" firmware loading timeouts and the particular computer system > > responsiveness, make this Ooops possible. However, I'm amazed that a > > single person has tripped it more than once. > > > > Revising the locking in linux/drivers/base/firmware_class.c should fix > > the problem. > > > > I don't believe this comment in the code now: > > > > /* fw_lock could be moved to 'struct firmware_priv' but since it is just > > * guarding for corner cases a global lock should be OK */ > > static DEFINE_MUTEX(fw_lock); > > > > struct firmware_priv { > > char *fw_id; > > ... > > > > And since "f_priv" is dynamically created and destroyed by > > request_firmware() I see no harm in > > > > 1. moving the mutex into struct firmware_priv > > 2. just always just grabbing an almost never contended mutex > > 3. getting rid of the file scope fw_lock. > > > > except grabbing a mutex() while the timeout timer is running during > > loading, means one *could* sleep for a while consuming the timeout > > interval. > > That sounds reasonable to me, care to make up a patch for this? Yes. But it will take me a while. I don't have a git tree, because I don't have high bandwidth internet yet. (The cable company's been delayed in laying cable to my home due to repeated snowstorms.) I just didn't want the problem to fall through the cracks. I'll submit something to bugzilla for now. If a user complains of this rare Ooops when loading firmware, the current workaround is to lengthen the timeout via sysfs. Regards, Andy > thanks, > > greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Wed, Feb 10, 2010 at 10:34:56AM -0500, Andy Walls wrote: > On Tue, 2010-02-09 at 22:12 -0500, Devin Heitmueller wrote: > > On Tue, Feb 9, 2010 at 10:05 PM, Richard Lemieux > > wrote: > > > Andy, > > > > > > This is a great answer! Thanks very much. When I get into this situation > > > again > > > I will know what to look for. > > > > > > A possible reason why I got into this problem in the first place is that I > > > tried > > > many combinations of parameters with mplayer and azap in order to learn > > > how > > > to use the USB tuner in both the ATSC and the NTSC mode. I will look back > > > in the terminal history to see if I can find anything. > > > > I think the key to figuring out the bug at this point is you finding a > > sequence where you can reliably reproduce the oops. If we have that, > > then I can start giving you some code to try which we can see if it > > addresses the problem. > > > > For example, I would start by giving you a fix which results in us not > > calling the firmware release if the request_firmware() call failed, > > but it wouldn't be much help if you could not definitively tell me if > > the problem is fixed. > > > For the oops analysis here: > > http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/15954 > > > I will also note that the file scope "fw_lock" mutex is rather > inconsistently used in > linux/drivers/base/fw_class.c:firmware_loading_store(). (I guess for > not wanting to consume the timeout interval with sleeping?) > > The mutex protects "case 1:", but all other cases appear to be only > protected by atomic status bit checks that can fall through to > fw_load_abort() which complete()'s the fw_priv->completion. > > Also not that in the _request_firmware() this sequence is the only place > a once good "fw_priv->fw" pointer is set to NULL: > > mutex_lock(&fw_lock); > if (!fw_priv->fw->size || test_bit(FW_STATUS_ABORT, > &fw_priv->status)) { > retval = -ENOENT; > release_firmware(fw_priv->fw); > *firmware_p = NULL; > } > fw_priv->fw = NULL; <--- The only place it is set to > NULL > mutex_unlock(&fw_lock); > > > So if the timeout timer fires at nearly the same time as udev coming in > and say "I'm done loading" without holding the mutex, one can run into > the Ooops. Not only that, I think the above code can leak memory under > some circumstances when the "if" clause is not satisfied. > > I think this really is a firmware_class.c issue. I think the "just > right" firmware loading timeouts and the particular computer system > responsiveness, make this Ooops possible. However, I'm amazed that a > single person has tripped it more than once. > > Revising the locking in linux/drivers/base/firmware_class.c should fix > the problem. > > I don't believe this comment in the code now: > > /* fw_lock could be moved to 'struct firmware_priv' but since it is just > * guarding for corner cases a global lock should be OK */ > static DEFINE_MUTEX(fw_lock); > > struct firmware_priv { > char *fw_id; > ... > > And since "f_priv" is dynamically created and destroyed by > request_firmware() I see no harm in > > 1. moving the mutex into struct firmware_priv > 2. just always just grabbing an almost never contended mutex > 3. getting rid of the file scope fw_lock. > > except grabbing a mutex() while the timeout timer is running during > loading, means one *could* sleep for a while consuming the timeout > interval. That sounds reasonable to me, care to make up a patch for this? thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Tue, 2010-02-09 at 22:12 -0500, Devin Heitmueller wrote: > On Tue, Feb 9, 2010 at 10:05 PM, Richard Lemieux > wrote: > > Andy, > > > > This is a great answer! Thanks very much. When I get into this situation > > again > > I will know what to look for. > > > > A possible reason why I got into this problem in the first place is that I > > tried > > many combinations of parameters with mplayer and azap in order to learn how > > to use the USB tuner in both the ATSC and the NTSC mode. I will look back > > in the terminal history to see if I can find anything. > > I think the key to figuring out the bug at this point is you finding a > sequence where you can reliably reproduce the oops. If we have that, > then I can start giving you some code to try which we can see if it > addresses the problem. > > For example, I would start by giving you a fix which results in us not > calling the firmware release if the request_firmware() call failed, > but it wouldn't be much help if you could not definitively tell me if > the problem is fixed. For the oops analysis here: http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/15954 I will also note that the file scope "fw_lock" mutex is rather inconsistently used in linux/drivers/base/fw_class.c:firmware_loading_store(). (I guess for not wanting to consume the timeout interval with sleeping?) The mutex protects "case 1:", but all other cases appear to be only protected by atomic status bit checks that can fall through to fw_load_abort() which complete()'s the fw_priv->completion. Also not that in the _request_firmware() this sequence is the only place a once good "fw_priv->fw" pointer is set to NULL: mutex_lock(&fw_lock); if (!fw_priv->fw->size || test_bit(FW_STATUS_ABORT, &fw_priv->status)) { retval = -ENOENT; release_firmware(fw_priv->fw); *firmware_p = NULL; } fw_priv->fw = NULL; <--- The only place it is set to NULL mutex_unlock(&fw_lock); So if the timeout timer fires at nearly the same time as udev coming in and say "I'm done loading" without holding the mutex, one can run into the Ooops. Not only that, I think the above code can leak memory under some circumstances when the "if" clause is not satisfied. I think this really is a firmware_class.c issue. I think the "just right" firmware loading timeouts and the particular computer system responsiveness, make this Ooops possible. However, I'm amazed that a single person has tripped it more than once. Revising the locking in linux/drivers/base/firmware_class.c should fix the problem. I don't believe this comment in the code now: /* fw_lock could be moved to 'struct firmware_priv' but since it is just * guarding for corner cases a global lock should be OK */ static DEFINE_MUTEX(fw_lock); struct firmware_priv { char *fw_id; ... And since "f_priv" is dynamically created and destroyed by request_firmware() I see no harm in 1. moving the mutex into struct firmware_priv 2. just always just grabbing an almost never contended mutex 3. getting rid of the file scope fw_lock. except grabbing a mutex() while the timeout timer is running during loading, means one *could* sleep for a while consuming the timeout interval. Or am I out to lunch? Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Tue, 2010-02-09 at 22:12 -0500, Devin Heitmueller wrote: > On Tue, Feb 9, 2010 at 10:05 PM, Richard Lemieux > wrote: > > Andy, > > > > This is a great answer! Thanks very much. When I get into this situation > > again > > I will know what to look for. > > > > A possible reason why I got into this problem in the first place is that I > > tried > > many combinations of parameters with mplayer and azap in order to learn how > > to use the USB tuner in both the ATSC and the NTSC mode. I will look back > > in the terminal history to see if I can find anything. > > I think the key to figuring out the bug at this point is you finding a > sequence where you can reliably reproduce the oops. If we have that, > then I can start giving you some code to try which we can see if it > addresses the problem. Also the verbose output of udevadm monitor (see man udevadm) would help us get a feeling for the timing relationships for the firmware requests. > For example, I would start by giving you a fix which results in us not > calling the firmware release if the request_firmware() call failed, > but it wouldn't be much help if you could not definitively tell me if > the problem is fixed. Definitely. Also, given the slow loading due to a chip I2C limitation, Richard, you may just want to increase your firmware loading timeout: $ su - root Password: # cat /sys/class/firmware/timeout 10 # echo 90 > /sys/class/firmware/timeout # cat /sys/class/firmware/timeout 90 And see if the problem "goes away". Again having some sort of steps to reliably reproduce the oops would be helpful in determining the efficacy of such a work around. Regards, Andy > Devin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Tue, Feb 9, 2010 at 10:05 PM, Richard Lemieux wrote: > Andy, > > This is a great answer! Thanks very much. When I get into this situation > again > I will know what to look for. > > A possible reason why I got into this problem in the first place is that I > tried > many combinations of parameters with mplayer and azap in order to learn how > to use the USB tuner in both the ATSC and the NTSC mode. I will look back > in the terminal history to see if I can find anything. I think the key to figuring out the bug at this point is you finding a sequence where you can reliably reproduce the oops. If we have that, then I can start giving you some code to try which we can see if it addresses the problem. For example, I would start by giving you a fix which results in us not calling the firmware release if the request_firmware() call failed, but it wouldn't be much help if you could not definitively tell me if the problem is fixed. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Tue, Feb 9, 2010 at 9:14 PM, Andy Walls wrote: > Both Ooops below are related to userspace loading of firmware for the > HVR-950Q. Very strange. The xc5000 function doesn't appear to really do anything unusual. It calls request_firmware(), pushes the code into the chip, and then call release_firmware() [see xc5000.c:xc5000_fwupload() ] One thing that does jump out at me which could be problematic is the function will call release_firmware() even if request_firmware() fails. I doubt that is the correct behavior. And combined with the fact that his dmesg shows the error "run_program: '/lib/udev/firmware.sh' abnormal exit" makes me wonder if the subsequent to release_firmware() despite the error condition is what is causing the problem. The other thing that is a bit unusual about the xc5000 in this particular case is the time to load the firmware is exceptionally long (around 7 seconds) due to a hardware bug in the au0828 which requires us to run the i2c bus at a very slow rate. Hence, it's possible that the unusually long time between request_firmware() and release_firmware() has exposed some sort of race in the firmware loading core. It would be useful if we could get the full dmesg output so we can get some more context leading up to the oops. Also, it would be helpful if the user could enable the "debug=1" in the xc5000 modprobe options. One more question: is the user doing any suspend/resume operations? For example, is this a laptop in which he is closing the lid and this is the first attempt to use the device after resume? Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
Andy, This is a great answer! Thanks very much. When I get into this situation again I will know what to look for. A possible reason why I got into this problem in the first place is that I tried many combinations of parameters with mplayer and azap in order to learn how to use the USB tuner in both the ATSC and the NTSC mode. I will look back in the terminal history to see if I can find anything. Regards, Richard Andy Walls wrote: ... Your ability to reproduce this should be rather limited. If you know steps that make it more likely to reproduce, please remember what they are. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Mon, 2010-02-08 at 23:43 -0500, Richard Lemieux wrote: > Hi, > > I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that > activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has > run (and is no longer in use by an application) triggers a driver crash. > > Each device individually works fine (as long as the other one does not run). Both Ooops below are related to userspace loading of firmware for the HVR-950Q. > I don't know how to investigate this by myself, but I am available to help. > This is not critical. The system is otherwise stable. > > Here is the last event recorded in syslog. I activated the DVBS after > turning off applications running ATSC. > > Feb 8 16:18:16 pc3 kernel: DVB: registering adapter 1 frontend 0 (Auvitek > AU8522 QAM/8VSB Frontend)... > Feb 8 21:37:17 pc3 kernel: cx88[0]/0: unknown tv audio mode [0] > Feb 8 23:00:45 pc3 kernel: cx88[0]/0: unknown tv audio mode [0] > Feb 8 23:01:24 pc3 last message repeated 2 times > Feb 8 23:04:00 pc3 kernel: BUG: unable to handle kernel NULL pointer > dereference at 0004 > Feb 8 23:04:00 pc3 kernel: IP: [] firmware_loading_store+0x68/0x1a0 > Feb 8 23:04:00 pc3 kernel: *pdpt = 3650e001 *pde = > Feb 8 23:04:00 pc3 kernel: Oops: [#1] SMP > Feb 8 23:04:00 pc3 kernel: last sysfs file: > /sys/class/firmware/:08:00.0/loading > Feb 8 23:04:00 pc3 kernel: Modules linked in: xc5000 tuner au8522 au0828 > videobuf_vmalloc snd_seq rtc hid_logitech ext4 jbd2 crc16 nls_iso8859_1 > nls_cp437 bsd_comp ppp_deflate zlib_deflate ppp_async crc_ccitt ppp_generic > slhc > parport_pc lp parport joydev usb_storage usblp snd_usb_audio snd_usb_lib > snd_rawmidi snd_seq_device usbhid snd_hwdep cx24116 cx88_dvb cx88_vp3054_i2c > videobuf_dvb dvb_core snd_hda_codec_realtek snd_hda_intel snd_hda_codec > snd_pcm_oss cx8802 snd_mixer_oss cx8800 cx88xx snd_pcm ir_common i2c_i801 > i2c_algo_bit v4l2_common snd_timer tveeprom ohci1394 sky2 ehci_hcd snd > videodev > v4l1_compat videobuf_dma_sg btcx_risc ieee1394 8250_pnp 8250 serial_core > uhci_hcd bitrev nvidia(P) crc32 agpgart videobuf_core soundcore > snd_page_alloc > i2c_core usbcore sg evdev > Feb 8 23:04:00 pc3 kernel: > Feb 8 23:04:00 pc3 kernel: Pid: 6390, comm: firmware.agent Tainted: P > (2.6.32.7 #1) P5E WS Pro > Feb 8 23:04:00 pc3 kernel: EIP: 0060:[] EFLAGS: 00010296 CPU: 1 > Feb 8 23:04:00 pc3 kernel: EIP is at firmware_loading_store+0x68/0x1a0 > Feb 8 23:04:00 pc3 kernel: EAX: EBX: f66a1140 ECX: 0002 EDX: > 2f1dc161 > Feb 8 23:04:00 pc3 kernel: ESI: f7513440 EDI: f05b8380 EBP: 0002 ESP: > f0c15f1c > Feb 8 23:04:00 pc3 kernel: DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > Feb 8 23:04:00 pc3 kernel: Process firmware.agent (pid: 6390, ti=f0c14000 > task=f6e65850 task.ti=f0c14000) > Feb 8 23:04:00 pc3 kernel: Stack: > Feb 8 23:04:00 pc3 kernel: 0161 8000 0810b408 c430ed60 c10713d2 > c11ae5c0 0002 c13ab7c0 > Feb 8 23:04:00 pc3 kernel: <0> 0002 c11a6965 0002 f66dc940 f75242f8 > c10cc0d9 0002 0810b408 > Feb 8 23:04:00 pc3 kernel: <0> f66dc954 f7513448 f0c6cac0 0002 0810b408 > c10cc040 c1086ff0 f0c15f9c > Feb 8 23:04:00 pc3 kernel: Call Trace: > Feb 8 23:04:00 pc3 kernel: [] ? handle_mm_fault+0x612/0x9f0 > Feb 8 23:04:00 pc3 kernel: [] ? firmware_loading_store+0x0/0x1a0 > Feb 8 23:04:00 pc3 kernel: [] ? dev_attr_store+0x25/0x40 > Feb 8 23:04:00 pc3 kernel: [] ? sysfs_write_file+0x99/0x100 > Feb 8 23:04:00 pc3 kernel: [] ? sysfs_write_file+0x0/0x100 > Feb 8 23:04:00 pc3 kernel: [] ? vfs_write+0xa0/0x160 > Feb 8 23:04:00 pc3 kernel: [] ? sys_write+0x41/0x70 > Feb 8 23:04:00 pc3 kernel: [] ? sysenter_do_call+0x12/0x26 > Feb 8 23:04:00 pc3 kernel: Code: 04 e8 dd c8 ec ff 8b 53 40 31 c9 8b 43 3c > 8b > 7b 34 c7 04 24 61 01 00 00 c7 44 24 04 00 00 00 80 e8 8e cf ec ff 89 47 04 8b > 43 > 34 <8b> 78 04 85 ff 0f 84 f4 00 00 00 c7 43 44 00 00 00 00 8d 43 04 > Feb 8 23:04:00 pc3 kernel: EIP: [] > firmware_loading_store+0x68/0x1a0 > SS:ESP 0068:f0c15f1c > Feb 8 23:04:00 pc3 kernel: CR2: 0004 > Feb 8 23:04:00 pc3 kernel: ---[ end trace c07258db2013e403 ]--- > So we know the oops happens in linux/drivers/base/firmware_class.c:firmware_loading_store(). This is the function that handles the firmware loading status feedback from userspace. udev writes "1" to a device specific sysfs node when firmware loading begins, and writes "0" to that sysfs node when the firmware copying is completed by udev. You can use udevadm as root to monitor udev events. You can examine /lib/udev/firmware.sh to see the script that udev runs in response to firmware load requests that you see with udevadm. Anyway here is the source code that Ooops'ed: /** * firmware_loading_store - set value in the 'loading' control file * @dev: device pointer * @attr: device attribute pointer * @buf: buffer to scan for loading control value * @count
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
Hi, I tried something simple with three kernel versions: 2.6.30, 2.6.31, and 2.6.32.7. But I can't reproduce the problem that way. Just after booting I run alternatively /opt/dvb-apps/bin/szap -a 0 -r "CCTV 4" /opt/dvb-apps/bin/azap -a 1 -r "57.1" and then I run them concurrently and finally I disconnect the USB tuner and replug and retry the 'azap' I did not get any crash yet. So there is likely some other "environmental" condition that is relevant. I will continue using 2.6.32.7. Whenever I meet the problem I will take note of the environment and try to reproduce the same environment with other versions of the kernel. Thanks The only "major reorganization" in that time period I can think of is a couple of the files related to IR support were moved. Further, the problem appears to be in the implementation of request_firmware() and doesn't look specific to any changes in the v4l-dvb tree. All I can suggest at this point is you try to narrow down what release the breakage was introduced in, at which point we can take a look at what changed. Devin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Tue, Feb 9, 2010 at 8:44 AM, Richard Lemieux wrote: > Hi Devin, > > I was previously running kernel vmlinux-2.6.29.5. I notice there was a > major > reorganization of some of the media structure between 2.6.29 and 2.6.32. > Can you tell me at wich kernel version the change occured so I can start > from there. Hi Richard, The only "major reorganization" in that time period I can think of is a couple of the files related to IR support were moved. Further, the problem appears to be in the implementation of request_firmware() and doesn't look specific to any changes in the v4l-dvb tree. All I can suggest at this point is you try to narrow down what release the breakage was introduced in, at which point we can take a look at what changed. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
Hi Devin, I was previously running kernel vmlinux-2.6.29.5. I notice there was a major reorganization of some of the media structure between 2.6.29 and 2.6.32. Can you tell me at wich kernel version the change occured so I can start from there. Richard Devin Heitmueller wrote: On Mon, Feb 8, 2010 at 11:43 PM, Richard Lemieux wrote: Hi, I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has run (and is no longer in use by an application) triggers a driver crash. Hello Richard, Have you tried any other kernel version? For example, do you know that it works properly in 2.6.32.6? Can you bisect and see when the problem was introduced? Devin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
On Mon, Feb 8, 2010 at 11:43 PM, Richard Lemieux wrote: > Hi, > > I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that > activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has > run (and is no longer in use by an application) triggers a driver crash. Hello Richard, Have you tried any other kernel version? For example, do you know that it works properly in 2.6.32.6? Can you bisect and see when the problem was introduced? Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Driver crash on kernel 2.6.32.7. Interaction between cx8800 (DVB-S) and USB HVR Hauppauge 950q
Hi, I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has run (and is no longer in use by an application) triggers a driver crash. Each device individually works fine (as long as the other one does not run). I don't know how to investigate this by myself, but I am available to help. This is not critical. The system is otherwise stable. Here is the last event recorded in syslog. I activated the DVBS after turning off applications running ATSC. Feb 8 16:18:16 pc3 kernel: DVB: registering adapter 1 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)... Feb 8 21:37:17 pc3 kernel: cx88[0]/0: unknown tv audio mode [0] Feb 8 23:00:45 pc3 kernel: cx88[0]/0: unknown tv audio mode [0] Feb 8 23:01:24 pc3 last message repeated 2 times Feb 8 23:04:00 pc3 kernel: BUG: unable to handle kernel NULL pointer dereference at 0004 Feb 8 23:04:00 pc3 kernel: IP: [] firmware_loading_store+0x68/0x1a0 Feb 8 23:04:00 pc3 kernel: *pdpt = 3650e001 *pde = Feb 8 23:04:00 pc3 kernel: Oops: [#1] SMP Feb 8 23:04:00 pc3 kernel: last sysfs file: /sys/class/firmware/:08:00.0/loading Feb 8 23:04:00 pc3 kernel: Modules linked in: xc5000 tuner au8522 au0828 videobuf_vmalloc snd_seq rtc hid_logitech ext4 jbd2 crc16 nls_iso8859_1 nls_cp437 bsd_comp ppp_deflate zlib_deflate ppp_async crc_ccitt ppp_generic slhc parport_pc lp parport joydev usb_storage usblp snd_usb_audio snd_usb_lib snd_rawmidi snd_seq_device usbhid snd_hwdep cx24116 cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm_oss cx8802 snd_mixer_oss cx8800 cx88xx snd_pcm ir_common i2c_i801 i2c_algo_bit v4l2_common snd_timer tveeprom ohci1394 sky2 ehci_hcd snd videodev v4l1_compat videobuf_dma_sg btcx_risc ieee1394 8250_pnp 8250 serial_core uhci_hcd bitrev nvidia(P) crc32 agpgart videobuf_core soundcore snd_page_alloc i2c_core usbcore sg evdev Feb 8 23:04:00 pc3 kernel: Feb 8 23:04:00 pc3 kernel: Pid: 6390, comm: firmware.agent Tainted: P (2.6.32.7 #1) P5E WS Pro Feb 8 23:04:00 pc3 kernel: EIP: 0060:[] EFLAGS: 00010296 CPU: 1 Feb 8 23:04:00 pc3 kernel: EIP is at firmware_loading_store+0x68/0x1a0 Feb 8 23:04:00 pc3 kernel: EAX: EBX: f66a1140 ECX: 0002 EDX: 2f1dc161 Feb 8 23:04:00 pc3 kernel: ESI: f7513440 EDI: f05b8380 EBP: 0002 ESP: f0c15f1c Feb 8 23:04:00 pc3 kernel: DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Feb 8 23:04:00 pc3 kernel: Process firmware.agent (pid: 6390, ti=f0c14000 task=f6e65850 task.ti=f0c14000) Feb 8 23:04:00 pc3 kernel: Stack: Feb 8 23:04:00 pc3 kernel: 0161 8000 0810b408 c430ed60 c10713d2 c11ae5c0 0002 c13ab7c0 Feb 8 23:04:00 pc3 kernel: <0> 0002 c11a6965 0002 f66dc940 f75242f8 c10cc0d9 0002 0810b408 Feb 8 23:04:00 pc3 kernel: <0> f66dc954 f7513448 f0c6cac0 0002 0810b408 c10cc040 c1086ff0 f0c15f9c Feb 8 23:04:00 pc3 kernel: Call Trace: Feb 8 23:04:00 pc3 kernel: [] ? handle_mm_fault+0x612/0x9f0 Feb 8 23:04:00 pc3 kernel: [] ? firmware_loading_store+0x0/0x1a0 Feb 8 23:04:00 pc3 kernel: [] ? dev_attr_store+0x25/0x40 Feb 8 23:04:00 pc3 kernel: [] ? sysfs_write_file+0x99/0x100 Feb 8 23:04:00 pc3 kernel: [] ? sysfs_write_file+0x0/0x100 Feb 8 23:04:00 pc3 kernel: [] ? vfs_write+0xa0/0x160 Feb 8 23:04:00 pc3 kernel: [] ? sys_write+0x41/0x70 Feb 8 23:04:00 pc3 kernel: [] ? sysenter_do_call+0x12/0x26 Feb 8 23:04:00 pc3 kernel: Code: 04 e8 dd c8 ec ff 8b 53 40 31 c9 8b 43 3c 8b 7b 34 c7 04 24 61 01 00 00 c7 44 24 04 00 00 00 80 e8 8e cf ec ff 89 47 04 8b 43 34 <8b> 78 04 85 ff 0f 84 f4 00 00 00 c7 43 44 00 00 00 00 8d 43 04 Feb 8 23:04:00 pc3 kernel: EIP: [] firmware_loading_store+0x68/0x1a0 SS:ESP 0068:f0c15f1c Feb 8 23:04:00 pc3 kernel: CR2: 0004 Feb 8 23:04:00 pc3 kernel: ---[ end trace c07258db2013e403 ]--- Here is another event. I booted in between. The system is stable otherwise. Feb 7 14:15:06 pc3 kernel: DVB: registering adapter 1 frontend 0 (Auvitek AU8522 QAM/8VSB Frontend)... Feb 7 14:15:30 pc3 udevd-event[15971]: run_program: '/lib/udev/firmware.sh' abnormal exit Feb 7 14:15:30 pc3 kernel: BUG: unable to handle kernel NULL pointer dereference at 0004 Feb 7 14:15:30 pc3 kernel: IP: [] firmware_loading_store+0x62/0x1a0 Feb 7 14:15:30 pc3 kernel: *pdpt = 36bc4001 *pde = Feb 7 14:15:30 pc3 kernel: Oops: 0002 [#1] SMP Feb 7 14:15:30 pc3 kernel: last sysfs file: /sys/class/firmware/7-4/loading Feb 7 14:15:30 pc3 kernel: Modules linked in: snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep xc5000 tuner au8522 au0828 videobuf_vmalloc nvidia(P) snd_seq snd_seq_device rtc hid_logitech ext4 jbd2 crc16 nls_iso8859_1 nls_cp437 bsd_comp ppp_deflate zlib_deflate ppp_async crc_ccitt ppp_generic slhc agpgart parport_pc lp parport joydev usb_storage usbhid usblp cx24116 cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core snd_hd