Re: [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
On Fri, Nov 28, 2008 at 05:34:57PM -0800, Tony Lindgren wrote: From: Paul Walmsley p...@pwsan.com i2c-omap discriminates only between revision 1 or greater than revision 1. A following patch introduces code that must also discriminate between rev2.x, rev3.6, and rev3.12 controllers. Support this by storing the full revision data from the I2C_REV register, rather than just a single bit. The revision definitions may need to be extended for other ES levels that aren't currently available here. rev3.6 is what's present on the 2430SDP here (unknown ES revision); rev3.12 is used on the 3430ES2 here. Signed-off-by: Paul Walmsley p...@pwsan.com Signed-off-by: Tony Lindgren t...@atomide.com --- drivers/i2c/busses/i2c-omap.c | 25 - 1 files changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 40a1e4b..3ac510d 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -38,6 +38,13 @@ #include linux/clk.h #include linux/io.h +/* I2C controller revisions */ +#define OMAP_I2C_REV_2 0x20 + +/* I2C controller revisions present on specific hardware */ +#define OMAP_I2C_REV_ON_2430 0x36 +#define OMAP_I2C_REV_ON_3430 0x3C + /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) @@ -139,7 +146,7 @@ struct omap_i2c_dev { * fifo_size==0 implies no fifo * if set, should be trsh+1 */ - unsignedrev1:1; + u8 rev; unsignedb_hw:1; /* bad h/w fixes */ unsignedidle:1; u16 iestate;/* Saved interrupt register */ @@ -209,7 +216,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) dev-iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); - if (dev-rev1) { + if (dev-rev OMAP_I2C_REV_2) { iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ } else { omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev-iestate); @@ -231,7 +238,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) unsigned long timeout; unsigned long internal_clk = 0; - if (!dev-rev1) { + if (dev-rev = OMAP_I2C_REV_2) { omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ @@ -710,6 +717,7 @@ omap_i2c_probe(struct platform_device *pdev) struct omap_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem, *irq, *ioarea; + void *isr; There is a proper definition for the function type in linux/interrupt.h int r; u32 speed = 0; @@ -760,8 +768,7 @@ omap_i2c_probe(struct platform_device *pdev) omap_i2c_unidle(dev); - if (cpu_is_omap15xx()) - dev-rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) 0x20; + dev-rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) 0xff; if (cpu_is_omap2430() || cpu_is_omap34xx()) { u16 s; @@ -782,16 +789,16 @@ omap_i2c_probe(struct platform_device *pdev) /* reset ASAP, clearing any IRQs */ omap_i2c_init(dev); - r = request_irq(dev-irq, dev-rev1 ? omap_i2c_rev1_isr : omap_i2c_isr, - 0, pdev-name, dev); + isr = (dev-rev OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr; + r = request_irq(dev-irq, isr, 0, pdev-name, dev); if (r) { dev_err(dev-dev, failure requesting irq %i\n, dev-irq); goto err_unuse_clocks; } - r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) 0xff; + dev_info(dev-dev, bus %d rev%d.%d at %d kHz\n, - pdev-id, r 4, r 0xf, dev-speed); + pdev-id, dev-rev 4, dev-rev 0xf, dev-speed); omap_i2c_idle(dev); -- To unsubscribe from this list: send the line unsubscribe linux-i2c in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben (b...@fluff.org, http://www.fluff.org/) 'a smiley only costs 4 bytes' -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
On Tue, Dec 16, 2008 at 09:59:59PM +, Ben Dooks wrote: On Fri, Nov 28, 2008 at 05:34:57PM -0800, Tony Lindgren wrote: From: Paul Walmsley p...@pwsan.com i2c-omap discriminates only between revision 1 or greater than revision 1. A following patch introduces code that must also discriminate between rev2.x, rev3.6, and rev3.12 controllers. Support this by storing the full revision data from the I2C_REV register, rather than just a single bit. The revision definitions may need to be extended for other ES levels that aren't currently available here. rev3.6 is what's present on the 2430SDP here (unknown ES revision); rev3.12 is used on the 3430ES2 here. Signed-off-by: Paul Walmsley p...@pwsan.com Signed-off-by: Tony Lindgren t...@atomide.com --- drivers/i2c/busses/i2c-omap.c | 25 - 1 files changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 40a1e4b..3ac510d 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -38,6 +38,13 @@ #include linux/clk.h #include linux/io.h +/* I2C controller revisions */ +#define OMAP_I2C_REV_2 0x20 + +/* I2C controller revisions present on specific hardware */ +#define OMAP_I2C_REV_ON_2430 0x36 +#define OMAP_I2C_REV_ON_3430 0x3C + /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) @@ -139,7 +146,7 @@ struct omap_i2c_dev { * fifo_size==0 implies no fifo * if set, should be trsh+1 */ - unsignedrev1:1; + u8 rev; unsignedb_hw:1; /* bad h/w fixes */ unsignedidle:1; u16 iestate;/* Saved interrupt register */ @@ -209,7 +216,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) dev-iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); - if (dev-rev1) { + if (dev-rev OMAP_I2C_REV_2) { iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ } else { omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev-iestate); @@ -231,7 +238,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) unsigned long timeout; unsigned long internal_clk = 0; - if (!dev-rev1) { + if (dev-rev = OMAP_I2C_REV_2) { omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ @@ -710,6 +717,7 @@ omap_i2c_probe(struct platform_device *pdev) struct omap_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem, *irq, *ioarea; + void *isr; There is a proper definition for the function type in linux/interrupt.h I'm feeling a bit of Christmas spirit finally, will pull these and add a fix myself for this. -- Ben (b...@fluff.org, http://www.fluff.org/) 'a smiley only costs 4 bytes' -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
* Ben Dooks ben-li...@fluff.org [081216 14:07]: On Tue, Dec 16, 2008 at 09:59:59PM +, Ben Dooks wrote: On Fri, Nov 28, 2008 at 05:34:57PM -0800, Tony Lindgren wrote: From: Paul Walmsley p...@pwsan.com i2c-omap discriminates only between revision 1 or greater than revision 1. A following patch introduces code that must also discriminate between rev2.x, rev3.6, and rev3.12 controllers. Support this by storing the full revision data from the I2C_REV register, rather than just a single bit. The revision definitions may need to be extended for other ES levels that aren't currently available here. rev3.6 is what's present on the 2430SDP here (unknown ES revision); rev3.12 is used on the 3430ES2 here. Signed-off-by: Paul Walmsley p...@pwsan.com Signed-off-by: Tony Lindgren t...@atomide.com --- drivers/i2c/busses/i2c-omap.c | 25 - 1 files changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 40a1e4b..3ac510d 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -38,6 +38,13 @@ #include linux/clk.h #include linux/io.h +/* I2C controller revisions */ +#define OMAP_I2C_REV_2 0x20 + +/* I2C controller revisions present on specific hardware */ +#define OMAP_I2C_REV_ON_2430 0x36 +#define OMAP_I2C_REV_ON_3430 0x3C + /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) @@ -139,7 +146,7 @@ struct omap_i2c_dev { * fifo_size==0 implies no fifo * if set, should be trsh+1 */ - unsignedrev1:1; + u8 rev; unsignedb_hw:1; /* bad h/w fixes */ unsignedidle:1; u16 iestate;/* Saved interrupt register */ @@ -209,7 +216,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) dev-iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); - if (dev-rev1) { + if (dev-rev OMAP_I2C_REV_2) { iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ } else { omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev-iestate); @@ -231,7 +238,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) unsigned long timeout; unsigned long internal_clk = 0; - if (!dev-rev1) { + if (dev-rev = OMAP_I2C_REV_2) { omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ @@ -710,6 +717,7 @@ omap_i2c_probe(struct platform_device *pdev) struct omap_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem, *irq, *ioarea; + void *isr; There is a proper definition for the function type in linux/interrupt.h I'm feeling a bit of Christmas spirit finally, will pull these and add a fix myself for this. Thanks, I'll owe you a holiday ale for that :) Tony -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html