Re: [PATCH v4] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
* Ben Dooks ben-li...@fluff.org [100419 17:12]:
On Mon, Apr 19, 2010 at 12:44:22PM +0530, Manjunatha GK wrote:
Under certain rare conditions, I2C_STAT[13].RDR bit may be set
and the corresponding interrupt fire, even there is no data in
the receive FIFO, or the I2C data transfer is still ongoing.
These spurious RDR events must be ignored by the software.
This patch handles and ignores RDR spurious interrupts.
The below sequence is required in interrupt handler for
handling this errata:
1. If RDR is set to 1, clear RDR
2. Read I2C status register and check for BusBusy bit. If BusBusy
bit is set, skip remaining steps.
3. If BusBusy bit is not set, perform read operation on I2C status
register.
4. If RDR is set, clear the same. Check RDR again and clear if it sets
RDR bit again.
5. Perform I2C Data Read operation N number of times(where N is value
read from the register BUFSTAT-RXSTAT bit fields).
Note : This errata is applicable for OMAP2 and OMAP3 platforms only.
It is not applicable for OMAP4.
If people can give me a yes/no before the end of play tomorrow (ie,
2300GMT) then I will get this applied to for-linus/i2c and send it
for -rc.
This should be done as an inline function based on some flags set
during the init instead of testing for some constantly changing
combination of cpu_is_omap() macros.
IMHO, let's not keep piling up hacks.
Regards,
Tony
Signed-off-by: Manjunatha GK manj...@ti.com
Cc: linux-...@vger.kernel.org
Cc: ben-li...@fluff.org
Cc: Kalliguddi, Hema hem...@ti.com
Cc: Nishanth Menon n...@ti.com
Cc: Aaro Koskinen aaro.koski...@nokia.com
---
drivers/i2c/busses/i2c-omap.c | 28
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index f2019d2..8309eac 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -796,6 +796,34 @@ complete:
}
if (stat (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
u8 num_bytes = 1;
+
+ /*
+* I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
+* Not applicable for OMAP4.
+* Under certain rare conditions, RDR could be set again
+* when the bus is busy, then ignore the interrupt and
+* clear the interrupt.
+*/
+ if ((stat OMAP_I2C_STAT_RDR) !cpu_is_omap44xx()) {
+ /* Step 1: If RDR is set, clear it */
+ omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
+
+ /* Step 2: */
+ if(!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
+OMAP_I2C_STAT_BB)) {
+ /* Step 3: */
+ if(omap_i2c_read_reg(dev,
+ OMAP_I2C_STAT_REG)
+OMAP_I2C_STAT_RDR) {
+ omap_i2c_ack_stat(dev,
+ OMAP_I2C_STAT_RDR);
+ dev_err(dev-dev,
+ RDR when the bus is busy.\n);
+ continue;
+ }
+
+ }
+ }
if (dev-fifo_size) {
if (stat OMAP_I2C_STAT_RRDY)
num_bytes = dev-fifo_size;
--
1.6.0.4
--
To unsubscribe from this list: send the line unsubscribe linux-i2c in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben (b...@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line unsubscribe linux-i2c in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v4] OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
On Mon, Apr 19, 2010 at 12:44:22PM +0530, Manjunatha GK wrote:
Under certain rare conditions, I2C_STAT[13].RDR bit may be set
and the corresponding interrupt fire, even there is no data in
the receive FIFO, or the I2C data transfer is still ongoing.
These spurious RDR events must be ignored by the software.
This patch handles and ignores RDR spurious interrupts.
The below sequence is required in interrupt handler for
handling this errata:
1. If RDR is set to 1, clear RDR
2. Read I2C status register and check for BusBusy bit. If BusBusy
bit is set, skip remaining steps.
3. If BusBusy bit is not set, perform read operation on I2C status
register.
4. If RDR is set, clear the same. Check RDR again and clear if it sets
RDR bit again.
5. Perform I2C Data Read operation N number of times(where N is value
read from the register BUFSTAT-RXSTAT bit fields).
Note : This errata is applicable for OMAP2 and OMAP3 platforms only.
It is not applicable for OMAP4.
If people can give me a yes/no before the end of play tomorrow (ie,
2300GMT) then I will get this applied to for-linus/i2c and send it
for -rc.
Signed-off-by: Manjunatha GK manj...@ti.com
Cc: linux-...@vger.kernel.org
Cc: ben-li...@fluff.org
Cc: Kalliguddi, Hema hem...@ti.com
Cc: Nishanth Menon n...@ti.com
Cc: Aaro Koskinen aaro.koski...@nokia.com
---
drivers/i2c/busses/i2c-omap.c | 28
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index f2019d2..8309eac 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -796,6 +796,34 @@ complete:
}
if (stat (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
u8 num_bytes = 1;
+
+ /*
+ * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
+ * Not applicable for OMAP4.
+ * Under certain rare conditions, RDR could be set again
+ * when the bus is busy, then ignore the interrupt and
+ * clear the interrupt.
+ */
+ if ((stat OMAP_I2C_STAT_RDR) !cpu_is_omap44xx()) {
+ /* Step 1: If RDR is set, clear it */
+ omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
+
+ /* Step 2: */
+ if(!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
+ OMAP_I2C_STAT_BB)) {
+ /* Step 3: */
+ if(omap_i2c_read_reg(dev,
+ OMAP_I2C_STAT_REG)
+ OMAP_I2C_STAT_RDR) {
+ omap_i2c_ack_stat(dev,
+ OMAP_I2C_STAT_RDR);
+ dev_err(dev-dev,
+ RDR when the bus is busy.\n);
+ continue;
+ }
+
+ }
+ }
if (dev-fifo_size) {
if (stat OMAP_I2C_STAT_RRDY)
num_bytes = dev-fifo_size;
--
1.6.0.4
--
To unsubscribe from this list: send the line unsubscribe linux-i2c in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben (b...@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
