RE: [OpenWrt-Devel] ATH10K VLAN firmware issue
Thanks for your answer, How I can know when this issue will be fixed in ath10k firmware mainline? Do you know if Qualcomm publish a release note for this firmware? > -Message d'origine- > De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless- > ow...@vger.kernel.org] De la part de Valo, Kalle > Envoyé : mardi 21 février 2017 14:19 > À : voncken > Cc : 'OpenWrt Development List'; 'linux-wireless'; > ath...@lists.infradead.org > Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue > > voncken writes: > > > Do you know if the firmware team planned to fix the VLAN issue on > > ath10k firmware? > > I reported it forward only this week. > > -- > Kalle Valo
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 21 February 2017 at 13:42, Tom Psyborg wrote: > have you tried this one > https://forum.lede-project.org/t/new-qca988x-firmware-with-mesh-support/1587 >From my testing it does not work. > > On 21 February 2017 at 14:19, Valo, Kalle wrote: >> >> voncken writes: >> >> > Do you know if the firmware team planned to fix the VLAN issue on ath10k >> > firmware? >> >> I reported it forward only this week. >> >> -- >> Kalle Valo >> ___ >> openwrt-devel mailing list >> openwrt-de...@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > > ___ > openwrt-devel mailing list > openwrt-de...@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
RE: [OpenWrt-Devel] ATH10K VLAN firmware issue
Kalle, Do you know if the firmware team planned to fix the VLAN issue on ath10k firmware? Thanks for your help. Cedric. > -Message d'origine- > De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless- > ow...@vger.kernel.org] De la part de Valo, Kalle > Envoyé : mardi 15 novembre 2016 14:44 > À : Bruno Antunes > Cc : OpenWrt Development List; linux-wireless; voncken; > ath...@lists.infradead.org > Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue > > Bruno Antunes writes: > > > On 7 November 2016 at 18:06, Valo, Kalle > wrote: > >> Bruno Antunes writes: > >> > >>> On 4 November 2016 at 21:17, Valo, Kalle > wrote: > >>> > >>>> Can someone file a bug to bugzilla about this so that all the info > >>>> is properly stored? The more comprehensive the report is the > better. > >>>> > >>>> https://bugzilla.kernel.org/ > >>> > >>> I will file a bug report. > >> > >> Thanks, it's good to store all in one place so that it's easier to > >> find the relevant info. > > > > Just file the bug with the ID 187241 - VLAN support in ATH10k Feel > > free to ask for adicional info. I did not mention any names in the > bug > > report fell free to take credit if wanted. > > Thanks. I'll report it to the firmware team, let's see what happens. If > there's more information which might help to fix this feel free to > update that to the bug report. > > https://bugzilla.kernel.org/show_bug.cgi?id=187241 > > -- > Kalle Valo
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
voncken writes: > Do you know if the firmware team planned to fix the VLAN issue on ath10k > firmware? I reported it forward only this week. -- Kalle Valo
RE: [OpenWrt-Devel] ATH10K VLAN firmware issue
Hi Ben, Do you plan to release a candelatech firmware with this fix? Regards. Cedric Voncken. > -Message d'origine- > De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless- > ow...@vger.kernel.org] De la part de Ben Greear > Envoyé : samedi 5 novembre 2016 15:35 > À : Sebastian Gottschall; yu-chieh kung; Bruno Antunes > Cc : Mauro Mozzarelli; linux-wireless@vger.kernel.org; OpenWrt > Development List; ath...@lists.infradead.org > Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue > > Looks to me like 10.4 defaults to the right value, but possibly there > are other issues with it. I tested my CT 10.4 and it worked OK with > vlans for me. > > Thanks, > Ben > > On 11/05/2016 01:05 AM, Sebastian Gottschall wrote: > > would be good if qca can fix this bug finally in all available > > firmwares. its a very annoying issue since a long time > > > > Sebastian > > > > > > Am 04.11.2016 um 23:23 schrieb Ben Greear: > >> The bug appears that vlan-tx-stripping is unconditionally enabled in > >> at least my firmware. I have re-compiled w/out that flag set, and > it > >> appears to work for me. > >> > >> Please download this firmware, rename it firmware-2.bin, make sure > >> you remove/rename any firmware-5.bin (etc) so mine will load, and > see if that fixes your problem. > >> > >> Please note that it is very likely you will have to use same MAC > >> address for the VLAN devices that the underlying station uses in > order for this to work. > >> > >> https://www.candelatech.com/downloads/tmp/firmware-2-full- > community.b > >> in > >> > >> > >> Thanks, > >> Ben > >> > >> > >> On 11/04/2016 02:50 PM, Ben Greear wrote: > >>> I can reproduce this in my CT firmware. I'll see if I can fix it, > >>> but for stock firmware, it might be that changing the driver to use > >>> Ethernet packet type of native-wifi would make .1q vlans work. > >>> > >>> Thanks, > >>> Ben > >>> > >>> On 11/04/2016 10:28 AM, yu-chieh kung wrote: > >>>> I met the same problem before, > >>>> if i modify the 1q header to other value (0xaa00) before go into > firmware. > >>>> I can capture the packet in the air I think the vlan packet is > >>>> dropped in firmware. > >>>> > >>>> 2016-11-04 22:41 GMT+08:00 Bruno Antunes : > >>>>> On 4 November 2016 at 14:18, Mauro Mozzarelli > wrote: > >>>>>> Since the capability is implemented in software you might be > >>>>>> testing the limit of your router's CPU i/o speed. > >>>>> > >>>>> By loading the module in rawmode? > >>>>> > >>>>> The AP is an APU and Sta is an APU2. > >>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> On 04/11/16 14:13, Bruno Antunes wrote: > >>>>>>> > >>>>>>> Hi all, > >>>>>>> > >>>>>>> Old thread but I think the issue is still present. > >>>>>>> > >>>>>>> I'm running a setup with VLANs with WDS and ath10k cards. > >>>>>>> > >>>>>>> To make it work both cards must be loaded in rawmode, AP and > >>>>>>> Sta, and with no security. > >>>>>>> > >>>>>>> I'm using a OpenWrt trunk r49941 and the most recent firmware, > >>>>>>> 10.2.4.70.58, from Kalle ath10k firmware tree. > >>>>>>> > >>>>>>> Although it works the throughput is very bad. > >>>>>>> Are there any alternatives to improve the throughput. > >>>>>>> > >>>>>>> Best Regards, > >>>>>>> Bruno > >>>>>>> > >>>>>>> On 9 December 2015 at 17:24, voncken > wrote: > >>>>>>>> > >>>>>>>> > >>>>>>>>> -Message d'origine- > >>>>>>>>> De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : > >>>>>>>>> mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; > >>>>>>>>> ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 11/15/2016 07:00 AM, Bruno Antunes wrote: On 15 November 2016 at 14:55, Ben Greear wrote: The beta-18 release on my web page has the fix and should work fine. Probably soon I will promote the beta-18 to final release status. Any help in testing and verifying the beta works well is welcome. I will also do testing with that version. For clarity can I refer you and your firmware releases in the bug report? It is fine by me. It is a one-line patch to fix the firmware...QCA can ask me as well if they don't figure it out on their own. Thanks, Ben Thanks, Bruno Thanks, Ben On 11/15/2016 06:37 AM, voncken wrote: Hi Ben, Do you plan to release a candelatech firmware with this fix? Regards. Cedric Voncken. -Message d'origine- De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless- ow...@vger.kernel.org] De la part de Ben Greear Envoyé : samedi 5 novembre 2016 15:35 À : Sebastian Gottschall; yu-chieh kung; Bruno Antunes Cc : Mauro Mozzarelli; linux-wireless@vger.kernel.org; OpenWrt Development List; ath...@lists.infradead.org Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue Looks to me like 10.4 defaults to the right value, but possibly there are other issues with it. I tested my CT 10.4 and it worked OK with vlans for me. Thanks, Ben On 11/05/2016 01:05 AM, Sebastian Gottschall wrote: would be good if qca can fix this bug finally in all available firmwares. its a very annoying issue since a long time Sebastian Am 04.11.2016 um 23:23 schrieb Ben Greear: The bug appears that vlan-tx-stripping is unconditionally enabled in at least my firmware. I have re-compiled w/out that flag set, and it appears to work for me. Please download this firmware, rename it firmware-2.bin, make sure you remove/rename any firmware-5.bin (etc) so mine will load, and see if that fixes your problem. Please note that it is very likely you will have to use same MAC address for the VLAN devices that the underlying station uses in order for this to work. https://www.candelatech.com/downloads/tmp/firmware-2-full- community.b in Thanks, Ben On 11/04/2016 02:50 PM, Ben Greear wrote: I can reproduce this in my CT firmware. I'll see if I can fix it, but for stock firmware, it might be that changing the driver to use Ethernet packet type of native-wifi would make .1q vlans work. Thanks, Ben On 11/04/2016 10:28 AM, yu-chieh kung wrote: I met the same problem before, if i modify the 1q header to other value (0xaa00) before go into firmware. I can capture the packet in the air I think the vlan packet is dropped in firmware. 2016-11-04 22:41 GMT+08:00 Bruno Antunes : On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: Since the capability is implemented in software you might be testing the limit of your router's CPU i/o speed. By loading the module in rawmode? The AP is an APU and Sta is an APU2. On 04/11/16 14:13, Bruno Antunes wrote: Hi all, Old thread but I think the issue is still present. I'm running a setup with VLANs with WDS and ath10k cards. To make it work both cards must be loaded in rawmode, AP and Sta, and with no security. I'm using a OpenWrt trunk r49941 and the most recent firmware, 10.2.4.70.58, from Kalle ath10k firmware tree. Although it works the throughput is very bad. Are there any alternatives to improve the throughput. Best Regards, Bruno On 9 December 2015 at 17:24, voncken wrote: -Message d'origine- De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K VLAN firmware issue This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: I'm testing to transmit frame with 802.1q tag (VLAN). My client is set in STA + WDS and the netdev is bridged with eth0. I have a computer with vlan configuration set connected to the STA eth0. If I try to transmit frames with 802.1q tag, the frames are not sent. I checked with wireless sniffer, and I don't see the frame with VLAN tag (the frames without VLAN tag are sent). I tested with firmware 10.2.4.70.14-2 from kale github, 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt, and in all cases I have the same issue. Thanks for your help. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 15 November 2016 at 14:55, Ben Greear wrote: > The beta-18 release on my web page has the fix and should work fine. > > Probably soon I will promote the beta-18 to final release > status. Any help in testing and verifying the beta works well > is welcome. I will also do testing with that version. For clarity can I refer you and your firmware releases in the bug report? Thanks, Bruno > > Thanks, > Ben > > On 11/15/2016 06:37 AM, voncken wrote: >> >> Hi Ben, >> >> Do you plan to release a candelatech firmware with this fix? >> >> Regards. >> >> Cedric Voncken. >>> >>> -Message d'origine- >>> De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless- >>> ow...@vger.kernel.org] De la part de Ben Greear >>> Envoyé : samedi 5 novembre 2016 15:35 >>> À : Sebastian Gottschall; yu-chieh kung; Bruno Antunes >>> Cc : Mauro Mozzarelli; linux-wireless@vger.kernel.org; OpenWrt >>> Development List; ath...@lists.infradead.org >>> Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue >>> >>> >>> Looks to me like 10.4 defaults to the right value, but possibly there >>> are other issues with it. I tested my CT 10.4 and it worked OK with >>> vlans for me. >>> >>> Thanks, >>> Ben >>> >>> On 11/05/2016 01:05 AM, Sebastian Gottschall wrote: >>>> >>>> would be good if qca can fix this bug finally in all available >>>> firmwares. its a very annoying issue since a long time >>>> >>>> Sebastian >>>> >>>> >>>> Am 04.11.2016 um 23:23 schrieb Ben Greear: >>>>> >>>>> The bug appears that vlan-tx-stripping is unconditionally enabled in >>>>> at least my firmware. I have re-compiled w/out that flag set, and >>> >>> it >>>>> >>>>> appears to work for me. >>>>> >>>>> Please download this firmware, rename it firmware-2.bin, make sure >>>>> you remove/rename any firmware-5.bin (etc) so mine will load, and >>> >>> see if that fixes your problem. >>>>> >>>>> >>>>> Please note that it is very likely you will have to use same MAC >>>>> address for the VLAN devices that the underlying station uses in >>> >>> order for this to work. >>>>> >>>>> >>>>> https://www.candelatech.com/downloads/tmp/firmware-2-full- >>> >>> community.b >>>>> >>>>> in >>>>> >>>>> >>>>> Thanks, >>>>> Ben >>>>> >>>>> >>>>> On 11/04/2016 02:50 PM, Ben Greear wrote: >>>>>> >>>>>> I can reproduce this in my CT firmware. I'll see if I can fix it, >>>>>> but for stock firmware, it might be that changing the driver to use >>>>>> Ethernet packet type of native-wifi would make .1q vlans work. >>>>>> >>>>>> Thanks, >>>>>> Ben >>>>>> >>>>>> On 11/04/2016 10:28 AM, yu-chieh kung wrote: >>>>>>> >>>>>>> I met the same problem before, >>>>>>> if i modify the 1q header to other value (0xaa00) before go into >>> >>> firmware. >>>>>>> >>>>>>> I can capture the packet in the air I think the vlan packet is >>>>>>> dropped in firmware. >>>>>>> >>>>>>> 2016-11-04 22:41 GMT+08:00 Bruno Antunes : >>>>>>>> >>>>>>>> On 4 November 2016 at 14:18, Mauro Mozzarelli >>> >>> wrote: >>>>>>>>> >>>>>>>>> Since the capability is implemented in software you might be >>>>>>>>> testing the limit of your router's CPU i/o speed. >>>>>>>> >>>>>>>> >>>>>>>> By loading the module in rawmode? >>>>>>>> >>>>>>>> The AP is an APU and Sta is an APU2. >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On 04/11/16 14:13, Bruno Antunes wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
The beta-18 release on my web page has the fix and should work fine. Probably soon I will promote the beta-18 to final release status. Any help in testing and verifying the beta works well is welcome. Thanks, Ben On 11/15/2016 06:37 AM, voncken wrote: Hi Ben, Do you plan to release a candelatech firmware with this fix? Regards. Cedric Voncken. -Message d'origine- De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless- ow...@vger.kernel.org] De la part de Ben Greear Envoyé : samedi 5 novembre 2016 15:35 À : Sebastian Gottschall; yu-chieh kung; Bruno Antunes Cc : Mauro Mozzarelli; linux-wireless@vger.kernel.org; OpenWrt Development List; ath...@lists.infradead.org Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue Looks to me like 10.4 defaults to the right value, but possibly there are other issues with it. I tested my CT 10.4 and it worked OK with vlans for me. Thanks, Ben On 11/05/2016 01:05 AM, Sebastian Gottschall wrote: would be good if qca can fix this bug finally in all available firmwares. its a very annoying issue since a long time Sebastian Am 04.11.2016 um 23:23 schrieb Ben Greear: The bug appears that vlan-tx-stripping is unconditionally enabled in at least my firmware. I have re-compiled w/out that flag set, and it appears to work for me. Please download this firmware, rename it firmware-2.bin, make sure you remove/rename any firmware-5.bin (etc) so mine will load, and see if that fixes your problem. Please note that it is very likely you will have to use same MAC address for the VLAN devices that the underlying station uses in order for this to work. https://www.candelatech.com/downloads/tmp/firmware-2-full- community.b in Thanks, Ben On 11/04/2016 02:50 PM, Ben Greear wrote: I can reproduce this in my CT firmware. I'll see if I can fix it, but for stock firmware, it might be that changing the driver to use Ethernet packet type of native-wifi would make .1q vlans work. Thanks, Ben On 11/04/2016 10:28 AM, yu-chieh kung wrote: I met the same problem before, if i modify the 1q header to other value (0xaa00) before go into firmware. I can capture the packet in the air I think the vlan packet is dropped in firmware. 2016-11-04 22:41 GMT+08:00 Bruno Antunes : On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: Since the capability is implemented in software you might be testing the limit of your router's CPU i/o speed. By loading the module in rawmode? The AP is an APU and Sta is an APU2. On 04/11/16 14:13, Bruno Antunes wrote: Hi all, Old thread but I think the issue is still present. I'm running a setup with VLANs with WDS and ath10k cards. To make it work both cards must be loaded in rawmode, AP and Sta, and with no security. I'm using a OpenWrt trunk r49941 and the most recent firmware, 10.2.4.70.58, from Kalle ath10k firmware tree. Although it works the throughput is very bad. Are there any alternatives to improve the throughput. Best Regards, Bruno On 9 December 2015 at 17:24, voncken wrote: -Message d'origine- De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K VLAN firmware issue This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: I'm testing to transmit frame with 802.1q tag (VLAN). My client is set in STA + WDS and the netdev is bridged with eth0. I have a computer with vlan configuration set connected to the STA eth0. If I try to transmit frames with 802.1q tag, the frames are not sent. I checked with wireless sniffer, and I don't see the frame with VLAN tag (the frames without VLAN tag are sent). I tested with firmware 10.2.4.70.14-2 from kale github, 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt, and in all cases I have the same issue. Thanks for your help. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt- devel ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org http
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 15 November 2016 at 13:43, Valo, Kalle wrote: > Bruno Antunes writes: > >> On 7 November 2016 at 18:06, Valo, Kalle wrote: >>> Bruno Antunes writes: >>> On 4 November 2016 at 21:17, Valo, Kalle wrote: > Can someone file a bug to bugzilla about this so that all the info is > properly stored? The more comprehensive the report is the better. > > https://bugzilla.kernel.org/ I will file a bug report. >>> >>> Thanks, it's good to store all in one place so that it's easier to find >>> the relevant info. >> >> Just file the bug with the ID 187241 - VLAN support in ATH10k Feel >> free to ask for adicional info. I did not mention any names in the bug >> report fell free to take credit if wanted. > > Thanks. I'll report it to the firmware team, let's see what happens. If > there's more information which might help to fix this feel free to > update that to the bug report. I'm finishing my tests and will update the bug report ASAP. Turns out the bad throughput was the result of a failure in the switch port. With Ben's firmware the VLAN support is working fine with security. Thanks, Bruno > > https://bugzilla.kernel.org/show_bug.cgi?id=187241 > > -- > Kalle Valo
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
Bruno Antunes writes: > On 7 November 2016 at 18:06, Valo, Kalle wrote: >> Bruno Antunes writes: >> >>> On 4 November 2016 at 21:17, Valo, Kalle wrote: >>> Can someone file a bug to bugzilla about this so that all the info is properly stored? The more comprehensive the report is the better. https://bugzilla.kernel.org/ >>> >>> I will file a bug report. >> >> Thanks, it's good to store all in one place so that it's easier to find >> the relevant info. > > Just file the bug with the ID 187241 - VLAN support in ATH10k Feel > free to ask for adicional info. I did not mention any names in the bug > report fell free to take credit if wanted. Thanks. I'll report it to the firmware team, let's see what happens. If there's more information which might help to fix this feel free to update that to the bug report. https://bugzilla.kernel.org/show_bug.cgi?id=187241 -- Kalle Valo
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 7 November 2016 at 18:06, Valo, Kalle wrote: > Bruno Antunes writes: > >> On 4 November 2016 at 21:17, Valo, Kalle wrote: >>> Bruno Antunes writes: >>> Old thread but I think the issue is still present. I'm running a setup with VLANs with WDS and ath10k cards. To make it work both cards must be loaded in rawmode, AP and Sta, and with no security. I'm using a OpenWrt trunk r49941 and the most recent firmware, 10.2.4.70.58, from Kalle ath10k firmware tree. Although it works the throughput is very bad. Are there any alternatives to improve the throughput. >>> >>> Can someone file a bug to bugzilla about this so that all the info is >>> properly stored? The more comprehensive the report is the better. >>> >>> https://bugzilla.kernel.org/ >> >> I will file a bug report. > > Thanks, it's good to store all in one place so that it's easier to find > the relevant info. Just file the bug with the ID 187241 - VLAN support in ATH10k Feel free to ask for adicional info. I did not mention any names in the bug report fell free to take credit if wanted. Regards, Bruno > >> But since it appears to be a firmware related issue >> under what category can fill in the bug? > > You can file it under Drivers/network-wireless, AFAIK we don't have any > separate components for firmware bugs. Here's one example to follow: > > https://bugzilla.kernel.org/show_bug.cgi?id=186161 > > -- > Kalle Valo > ___ > openwrt-devel mailing list > openwrt-de...@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 7 November 2016 at 14:06, Ben Greear wrote: > On 11/07/2016 03:54 AM, Bruno Antunes wrote: >> >> On 4 November 2016 at 22:23, Ben Greear wrote: >>> >>> The bug appears that vlan-tx-stripping is unconditionally enabled in >>> at least my firmware. I have re-compiled w/out that flag set, and it >>> appears >>> to work for me. >>> >>> Please download this firmware, rename it firmware-2.bin, make sure you >>> remove/rename >>> any firmware-5.bin (etc) so mine will load, and see if that fixes your >>> problem. >> >> >> Thanks for the fast reply but it only solves "half" the problem. >> >> Now the connection between the AP and the Sta can be secure and the >> driver doesn't need to be loaded in rawmode. >> >> Unfortunatly the the throughput is still bad. >> >> iperf3 -c 10.10.4.15 >> Connecting to host 10.10.4.15, port 5201 >> [ 4] local 10.10.4.16 port 44893 connected to 10.10.4.15 port 5201 >> [ ID] Interval Transfer Bandwidth Retr Cwnd >> [ 4] 0.00-1.01 sec 42.4 KBytes 345 Kbits/sec6 1.41 KBytes >> [ 4] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes >> [ 4] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes >> [ 4] 3.01-4.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes >> [ 4] 4.01-5.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes >> [ 4] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes >> [ 4] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes >> [ 4] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes >> [ 4] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes >> [ 4] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bandwidth Retr >> [ 4] 0.00-10.01 sec 42.4 KBytes 34.7 Kbits/sec9 >> sender >> [ 4] 0.00-10.01 sec 0.00 Bytes 0.00 bits/sec >> receiver > > > You have a complex setup, so I think it would be best if you could break it > into > simpler parts to test. Some of the parts I already tested and are working > > First, try just STA to AP, no vlans, and see if you get useful throughput. > Works fine > Then try with VLANs > To Do > Then, try with WDS. Works fine > > Then try with WDS and vlans. > The ultimate goal... > In STA to AP mode with VLANs, it performed well for me. > > Thanks, > Ben > > >> >> iperf Done. >> >>> >>> Please note that it is very likely you will have to use same MAC address >>> for the VLAN devices that the underlying station uses in order for this >>> to >>> work. >> >> >> Can you please elaborate more? >> My setup is the folowing. >> The connection between the AP and Sta is in WDS >> For the moment all devices are in the same VLAN. >> >> client1 --- SW1 AP .. Sta SW2 --- client2 >> >> >> Thanks, >> Bruno >> >>> >>> https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin >>> >>> >>> Thanks, >>> Ben >>> >>> >>> >> >>> Ben Greear >>> Candela Technologies Inc http://www.candelatech.com >>> >> > > -- > Ben Greear > Candela Technologies Inc http://www.candelatech.com
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 11/07/2016 03:54 AM, Bruno Antunes wrote: On 4 November 2016 at 22:23, Ben Greear wrote: The bug appears that vlan-tx-stripping is unconditionally enabled in at least my firmware. I have re-compiled w/out that flag set, and it appears to work for me. Please download this firmware, rename it firmware-2.bin, make sure you remove/rename any firmware-5.bin (etc) so mine will load, and see if that fixes your problem. Thanks for the fast reply but it only solves "half" the problem. Now the connection between the AP and the Sta can be secure and the driver doesn't need to be loaded in rawmode. Unfortunatly the the throughput is still bad. iperf3 -c 10.10.4.15 Connecting to host 10.10.4.15, port 5201 [ 4] local 10.10.4.16 port 44893 connected to 10.10.4.15 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.01 sec 42.4 KBytes 345 Kbits/sec6 1.41 KBytes [ 4] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes [ 4] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes [ 4] 3.01-4.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 4.01-5.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes [ 4] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.01 sec 42.4 KBytes 34.7 Kbits/sec9 sender [ 4] 0.00-10.01 sec 0.00 Bytes 0.00 bits/sec receiver You have a complex setup, so I think it would be best if you could break it into simpler parts to test. First, try just STA to AP, no vlans, and see if you get useful throughput. Then try with VLANs Then, try with WDS. Then try with WDS and vlans. In STA to AP mode with VLANs, it performed well for me. Thanks, Ben iperf Done. Please note that it is very likely you will have to use same MAC address for the VLAN devices that the underlying station uses in order for this to work. Can you please elaborate more? My setup is the folowing. The connection between the AP and Sta is in WDS For the moment all devices are in the same VLAN. client1 --- SW1 AP .. Sta SW2 --- client2 Thanks, Bruno https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin Thanks, Ben Ben Greear Candela Technologies Inc http://www.candelatech.com -- Ben Greear Candela Technologies Inc http://www.candelatech.com
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 4 November 2016 at 22:23, Ben Greear wrote: > The bug appears that vlan-tx-stripping is unconditionally enabled in > at least my firmware. I have re-compiled w/out that flag set, and it > appears > to work for me. > > Please download this firmware, rename it firmware-2.bin, make sure you > remove/rename > any firmware-5.bin (etc) so mine will load, and see if that fixes your > problem. Thanks for the fast reply but it only solves "half" the problem. Now the connection between the AP and the Sta can be secure and the driver doesn't need to be loaded in rawmode. Unfortunatly the the throughput is still bad. iperf3 -c 10.10.4.15 Connecting to host 10.10.4.15, port 5201 [ 4] local 10.10.4.16 port 44893 connected to 10.10.4.15 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.01 sec 42.4 KBytes 345 Kbits/sec6 1.41 KBytes [ 4] 1.01-2.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes [ 4] 2.01-3.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes [ 4] 3.01-4.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 4.01-5.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 6.01-7.01 sec 0.00 Bytes 0.00 bits/sec1 1.41 KBytes [ 4] 7.01-8.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 8.01-9.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes [ 4] 9.01-10.01 sec 0.00 Bytes 0.00 bits/sec0 1.41 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.01 sec 42.4 KBytes 34.7 Kbits/sec9 sender [ 4] 0.00-10.01 sec 0.00 Bytes 0.00 bits/sec receiver iperf Done. > > Please note that it is very likely you will have to use same MAC address > for the VLAN devices that the underlying station uses in order for this to > work. Can you please elaborate more? My setup is the folowing. The connection between the AP and Sta is in WDS For the moment all devices are in the same VLAN. client1 --- SW1 AP .. Sta SW2 --- client2 Thanks, Bruno > > https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin > > > Thanks, > Ben > > > > Ben Greear > Candela Technologies Inc http://www.candelatech.com >
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
Looks to me like 10.4 defaults to the right value, but possibly there are other issues with it. I tested my CT 10.4 and it worked OK with vlans for me. Thanks, Ben On 11/05/2016 01:05 AM, Sebastian Gottschall wrote: would be good if qca can fix this bug finally in all available firmwares. its a very annoying issue since a long time Sebastian Am 04.11.2016 um 23:23 schrieb Ben Greear: The bug appears that vlan-tx-stripping is unconditionally enabled in at least my firmware. I have re-compiled w/out that flag set, and it appears to work for me. Please download this firmware, rename it firmware-2.bin, make sure you remove/rename any firmware-5.bin (etc) so mine will load, and see if that fixes your problem. Please note that it is very likely you will have to use same MAC address for the VLAN devices that the underlying station uses in order for this to work. https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin Thanks, Ben On 11/04/2016 02:50 PM, Ben Greear wrote: I can reproduce this in my CT firmware. I'll see if I can fix it, but for stock firmware, it might be that changing the driver to use Ethernet packet type of native-wifi would make .1q vlans work. Thanks, Ben On 11/04/2016 10:28 AM, yu-chieh kung wrote: I met the same problem before, if i modify the 1q header to other value (0xaa00) before go into firmware. I can capture the packet in the air I think the vlan packet is dropped in firmware. 2016-11-04 22:41 GMT+08:00 Bruno Antunes : On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: Since the capability is implemented in software you might be testing the limit of your router's CPU i/o speed. By loading the module in rawmode? The AP is an APU and Sta is an APU2. On 04/11/16 14:13, Bruno Antunes wrote: Hi all, Old thread but I think the issue is still present. I'm running a setup with VLANs with WDS and ath10k cards. To make it work both cards must be loaded in rawmode, AP and Sta, and with no security. I'm using a OpenWrt trunk r49941 and the most recent firmware, 10.2.4.70.58, from Kalle ath10k firmware tree. Although it works the throughput is very bad. Are there any alternatives to improve the throughput. Best Regards, Bruno On 9 December 2015 at 17:24, voncken wrote: -Message d'origine- De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K VLAN firmware issue This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: I'm testing to transmit frame with 802.1q tag (VLAN). My client is set in STA + WDS and the netdev is bridged with eth0. I have a computer with vlan configuration set connected to the STA eth0. If I try to transmit frames with 802.1q tag, the frames are not sent. I checked with wireless sniffer, and I don't see the frame with VLAN tag (the frames without VLAN tag are sent). I tested with firmware 10.2.4.70.14-2 from kale github, 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt, and in all cases I have the same issue. Thanks for your help. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ ath10k mailing list ath...@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k -- Ben Greear Candela Technologies Inc http://www.candelatech.com
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
would be good if qca can fix this bug finally in all available firmwares. its a very annoying issue since a long time Sebastian Am 04.11.2016 um 23:23 schrieb Ben Greear: The bug appears that vlan-tx-stripping is unconditionally enabled in at least my firmware. I have re-compiled w/out that flag set, and it appears to work for me. Please download this firmware, rename it firmware-2.bin, make sure you remove/rename any firmware-5.bin (etc) so mine will load, and see if that fixes your problem. Please note that it is very likely you will have to use same MAC address for the VLAN devices that the underlying station uses in order for this to work. https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin Thanks, Ben On 11/04/2016 02:50 PM, Ben Greear wrote: I can reproduce this in my CT firmware. I'll see if I can fix it, but for stock firmware, it might be that changing the driver to use Ethernet packet type of native-wifi would make .1q vlans work. Thanks, Ben On 11/04/2016 10:28 AM, yu-chieh kung wrote: I met the same problem before, if i modify the 1q header to other value (0xaa00) before go into firmware. I can capture the packet in the air I think the vlan packet is dropped in firmware. 2016-11-04 22:41 GMT+08:00 Bruno Antunes : On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: Since the capability is implemented in software you might be testing the limit of your router's CPU i/o speed. By loading the module in rawmode? The AP is an APU and Sta is an APU2. On 04/11/16 14:13, Bruno Antunes wrote: Hi all, Old thread but I think the issue is still present. I'm running a setup with VLANs with WDS and ath10k cards. To make it work both cards must be loaded in rawmode, AP and Sta, and with no security. I'm using a OpenWrt trunk r49941 and the most recent firmware, 10.2.4.70.58, from Kalle ath10k firmware tree. Although it works the throughput is very bad. Are there any alternatives to improve the throughput. Best Regards, Bruno On 9 December 2015 at 17:24, voncken wrote: -Message d'origine- De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K VLAN firmware issue This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: I'm testing to transmit frame with 802.1q tag (VLAN). My client is set in STA + WDS and the netdev is bridged with eth0. I have a computer with vlan configuration set connected to the STA eth0. If I try to transmit frames with 802.1q tag, the frames are not sent. I checked with wireless sniffer, and I don't see the frame with VLAN tag (the frames without VLAN tag are sent). I tested with firmware 10.2.4.70.14-2 from kale github, 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt, and in all cases I have the same issue. Thanks for your help. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ ath10k mailing list ath...@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k -- Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Berliner Ring 101, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: s.gottsch...@dd-wrt.com Tel.: +496251-582650 / Fax: +496251-5826565
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
The bug appears that vlan-tx-stripping is unconditionally enabled in at least my firmware. I have re-compiled w/out that flag set, and it appears to work for me. Please download this firmware, rename it firmware-2.bin, make sure you remove/rename any firmware-5.bin (etc) so mine will load, and see if that fixes your problem. Please note that it is very likely you will have to use same MAC address for the VLAN devices that the underlying station uses in order for this to work. https://www.candelatech.com/downloads/tmp/firmware-2-full-community.bin Thanks, Ben On 11/04/2016 02:50 PM, Ben Greear wrote: I can reproduce this in my CT firmware. I'll see if I can fix it, but for stock firmware, it might be that changing the driver to use Ethernet packet type of native-wifi would make .1q vlans work. Thanks, Ben On 11/04/2016 10:28 AM, yu-chieh kung wrote: I met the same problem before, if i modify the 1q header to other value (0xaa00) before go into firmware. I can capture the packet in the air I think the vlan packet is dropped in firmware. 2016-11-04 22:41 GMT+08:00 Bruno Antunes : On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: Since the capability is implemented in software you might be testing the limit of your router's CPU i/o speed. By loading the module in rawmode? The AP is an APU and Sta is an APU2. On 04/11/16 14:13, Bruno Antunes wrote: Hi all, Old thread but I think the issue is still present. I'm running a setup with VLANs with WDS and ath10k cards. To make it work both cards must be loaded in rawmode, AP and Sta, and with no security. I'm using a OpenWrt trunk r49941 and the most recent firmware, 10.2.4.70.58, from Kalle ath10k firmware tree. Although it works the throughput is very bad. Are there any alternatives to improve the throughput. Best Regards, Bruno On 9 December 2015 at 17:24, voncken wrote: -Message d'origine- De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K VLAN firmware issue This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: I'm testing to transmit frame with 802.1q tag (VLAN). My client is set in STA + WDS and the netdev is bridged with eth0. I have a computer with vlan configuration set connected to the STA eth0. If I try to transmit frames with 802.1q tag, the frames are not sent. I checked with wireless sniffer, and I don't see the frame with VLAN tag (the frames without VLAN tag are sent). I tested with firmware 10.2.4.70.14-2 from kale github, 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt, and in all cases I have the same issue. Thanks for your help. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ ath10k mailing list ath...@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k -- Ben Greear Candela Technologies Inc http://www.candelatech.com
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
I can reproduce this in my CT firmware. I'll see if I can fix it, but for stock firmware, it might be that changing the driver to use Ethernet packet type of native-wifi would make .1q vlans work. Thanks, Ben On 11/04/2016 10:28 AM, yu-chieh kung wrote: I met the same problem before, if i modify the 1q header to other value (0xaa00) before go into firmware. I can capture the packet in the air I think the vlan packet is dropped in firmware. 2016-11-04 22:41 GMT+08:00 Bruno Antunes : On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: Since the capability is implemented in software you might be testing the limit of your router's CPU i/o speed. By loading the module in rawmode? The AP is an APU and Sta is an APU2. On 04/11/16 14:13, Bruno Antunes wrote: Hi all, Old thread but I think the issue is still present. I'm running a setup with VLANs with WDS and ath10k cards. To make it work both cards must be loaded in rawmode, AP and Sta, and with no security. I'm using a OpenWrt trunk r49941 and the most recent firmware, 10.2.4.70.58, from Kalle ath10k firmware tree. Although it works the throughput is very bad. Are there any alternatives to improve the throughput. Best Regards, Bruno On 9 December 2015 at 17:24, voncken wrote: -Message d'origine- De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K VLAN firmware issue This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: I'm testing to transmit frame with 802.1q tag (VLAN). My client is set in STA + WDS and the netdev is bridged with eth0. I have a computer with vlan configuration set connected to the STA eth0. If I try to transmit frames with 802.1q tag, the frames are not sent. I checked with wireless sniffer, and I don't see the frame with VLAN tag (the frames without VLAN tag are sent). I tested with firmware 10.2.4.70.14-2 from kale github, 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt, and in all cases I have the same issue. Thanks for your help. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-de...@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ ath10k mailing list ath...@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k -- Ben Greear Candela Technologies Inc http://www.candelatech.com
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
I met the same problem before, if i modify the 1q header to other value (0xaa00) before go into firmware. I can capture the packet in the air I think the vlan packet is dropped in firmware. 2016-11-04 22:41 GMT+08:00 Bruno Antunes : > On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: >> Since the capability is implemented in software you might be testing the >> limit of your router's CPU i/o speed. > > By loading the module in rawmode? > > The AP is an APU and Sta is an APU2. > >> >> >> >> On 04/11/16 14:13, Bruno Antunes wrote: >>> >>> Hi all, >>> >>> Old thread but I think the issue is still present. >>> >>> I'm running a setup with VLANs with WDS and ath10k cards. >>> >>> To make it work both cards must be loaded in rawmode, AP >>> and Sta, and with no security. >>> >>> I'm using a OpenWrt trunk r49941 and the most recent firmware, >>> 10.2.4.70.58, from Kalle ath10k firmware tree. >>> >>> Although it works the throughput is very bad. >>> Are there any alternatives to improve the throughput. >>> >>> Best Regards, >>> Bruno >>> >>> On 9 December 2015 at 17:24, voncken wrote: > -Message d'origine- > De : Ben Greear [mailto:gree...@candelatech.com] > Envoyé : mercredi 9 décembre 2015 16:34 > À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless > Objet : Re: ATH10K VLAN firmware issue > > This only happens when you use STA + WDS, or is .1q broken for you in > other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. > Thanks, > Ben > > On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: >> >> I'm testing to transmit frame with 802.1q tag (VLAN). >> >> My client is set in STA + WDS and the netdev is bridged with eth0. >> I have a computer with vlan configuration set connected to the STA >> eth0. >> >> If I try to transmit frames with 802.1q tag, the frames are not sent. >> >> I checked with wireless sniffer, and I don't see the frame with >> VLAN >> tag (the frames without VLAN tag are sent). >> >> I tested with firmware 10.2.4.70.14-2 from kale github, >> 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from >> openwrt, and in all cases I have the same issue. >> >> Thanks for your help. >> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe >> linux-wireless" in the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > -- > Ben Greear > Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> ___ >>> openwrt-devel mailing list >>> openwrt-de...@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> ___ >> openwrt-devel mailing list >> openwrt-de...@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > ___ > ath10k mailing list > ath...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/ath10k
Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
On 4 November 2016 at 14:18, Mauro Mozzarelli wrote: > Since the capability is implemented in software you might be testing the > limit of your router's CPU i/o speed. By loading the module in rawmode? The AP is an APU and Sta is an APU2. > > > > On 04/11/16 14:13, Bruno Antunes wrote: >> >> Hi all, >> >> Old thread but I think the issue is still present. >> >> I'm running a setup with VLANs with WDS and ath10k cards. >> >> To make it work both cards must be loaded in rawmode, AP >> and Sta, and with no security. >> >> I'm using a OpenWrt trunk r49941 and the most recent firmware, >> 10.2.4.70.58, from Kalle ath10k firmware tree. >> >> Although it works the throughput is very bad. >> Are there any alternatives to improve the throughput. >> >> Best Regards, >> Bruno >> >> On 9 December 2015 at 17:24, voncken wrote: >>> >>> -Message d'origine- De : Ben Greear [mailto:gree...@candelatech.com] Envoyé : mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN; ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K VLAN firmware issue This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? >>> >>> No, this issue occurs in all modes (STA, STA + WDS, AP). >>> >>> Thanks >>> >>> Cedric. >>> Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: > > I'm testing to transmit frame with 802.1q tag (VLAN). > > My client is set in STA + WDS and the netdev is bridged with eth0. > I have a computer with vlan configuration set connected to the STA > eth0. > > If I try to transmit frames with 802.1q tag, the frames are not >>> >>> sent. > > I checked with wireless sniffer, and I don't see the frame with > VLAN > tag (the frames without VLAN tag are sent). > > I tested with firmware 10.2.4.70.14-2 from kale github, > 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from > openwrt, and in all cases I have the same issue. > > Thanks for your help. > > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-wireless" in the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Ben Greear Candela Technologies Inc http://www.candelatech.com >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" >>> in >>> the body of a message to majord...@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> ___ >> openwrt-devel mailing list >> openwrt-de...@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > ___ > openwrt-devel mailing list > openwrt-de...@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel