Re: [pfSense] changes made in web GUI not sticking, yet claims "saved".
Thanks all, Chris that was it, thanks again. User error or as I like to say, a layer 8 issue. I made a firewall admin group after configuring the AD servers, did a mass select of available permissions and added it to the group. One of them is a "deny write silently"... whoops... Take care, greg On Wed, Oct 5, 2016 at 1:46 PM, Chris Lwrote: > Check that the users/groups do not have the User - Config:Deny Config > Write privilege set. > > > On Oct 5, 2016, at 10:42 AM, Rodrigo Cunha > wrote: > > > > Hello greg, send for this list a checksun this pfsense iso, i have > pfsense > > but i not have this problems. > > I have pfsense 2.3.2 too, but i dont have this problem in my system... > > Try restore standard rules in the pfsense console,may be option 4 in > > console terminal...restart pfsense. > > but send for us the checksun for this iso... > > > > 2016-10-05 14:00 GMT-03:00 greg whynott : > > > >> Hello, > >> > >> Installed the v2.3.2 community edition today and am having a problem > with > >> the web gui not implementing changes made. > >> > >> Any changes made via the web gui pfsense claims they are saved and asks > you > >> to apply the changes, yet after doing so any changes made are not > >> reflected in the web gui or the actual config. If you refresh the > page, > >> log out/in the changes are not shown. The don't end up in the config. > I > >> don't know if it has anything to do with it but it *seemed* to be > working > >> up till I added the AD authentication server. But that was the first > thing > >> I did after IP'n the interfaces, no other changes were made up to that > >> point. > >> > >> As it is now, the solution can not be configured any further from the > web > >> interface. > >> > >> Now I can't rename an interface, add an IP, change the host-name of > the > >> system and so on. Anything you change within the web gui is lost, even > >> after it clams your changes have been saved. I've tried this with both > a > >> local admin account (built in admin) and an AD admin account. behaves > the > >> same with both. I've also tried 3 browsers, and two different > machines. > >> Same results. > >> > >> In our environment we have an older 2.1.5 system, on the same > >> browsers/system the older one is functioning as expected. Since it was > a > >> new install, I tried installing it again but it is acting the same. > >> > >> Are there any logs I can forward or look at which may provide insight? > >> Looking at the standard ones in /var/log/* does not reveal anything odd > >> looking.. > >> > >> thank you, > >> -greg > >> ___ > >> pfSense mailing list > >> https://lists.pfsense.org/mailman/listinfo/list > >> Support the project with Gold! https://pfsense.org/gold > >> > > > > > > > > -- > > Atenciosamente, > > Rodrigo da Silva Cunha > > ___ > > pfSense mailing list > > https://lists.pfsense.org/mailman/listinfo/list > > Support the project with Gold! https://pfsense.org/gold > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] Mailing List Posts from Non-Members
Ryan Coleman wrote: > Yay! You mean when I send from the wrong address it will just reject? > WOOHOO! It was the right address ;) ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] changes made in web GUI not sticking, yet claims "saved".
Check that the users/groups do not have the User - Config:Deny Config Write privilege set. > On Oct 5, 2016, at 10:42 AM, Rodrigo Cunhawrote: > > Hello greg, send for this list a checksun this pfsense iso, i have pfsense > but i not have this problems. > I have pfsense 2.3.2 too, but i dont have this problem in my system... > Try restore standard rules in the pfsense console,may be option 4 in > console terminal...restart pfsense. > but send for us the checksun for this iso... > > 2016-10-05 14:00 GMT-03:00 greg whynott : > >> Hello, >> >> Installed the v2.3.2 community edition today and am having a problem with >> the web gui not implementing changes made. >> >> Any changes made via the web gui pfsense claims they are saved and asks you >> to apply the changes, yet after doing so any changes made are not >> reflected in the web gui or the actual config. If you refresh the page, >> log out/in the changes are not shown. The don't end up in the config. I >> don't know if it has anything to do with it but it *seemed* to be working >> up till I added the AD authentication server. But that was the first thing >> I did after IP'n the interfaces, no other changes were made up to that >> point. >> >> As it is now, the solution can not be configured any further from the web >> interface. >> >> Now I can't rename an interface, add an IP, change the host-name of the >> system and so on. Anything you change within the web gui is lost, even >> after it clams your changes have been saved. I've tried this with both a >> local admin account (built in admin) and an AD admin account. behaves the >> same with both. I've also tried 3 browsers, and two different machines. >> Same results. >> >> In our environment we have an older 2.1.5 system, on the same >> browsers/system the older one is functioning as expected. Since it was a >> new install, I tried installing it again but it is acting the same. >> >> Are there any logs I can forward or look at which may provide insight? >> Looking at the standard ones in /var/log/* does not reveal anything odd >> looking.. >> >> thank you, >> -greg >> ___ >> pfSense mailing list >> https://lists.pfsense.org/mailman/listinfo/list >> Support the project with Gold! https://pfsense.org/gold >> > > > > -- > Atenciosamente, > Rodrigo da Silva Cunha > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] changes made in web GUI not sticking, yet claims "saved".
Hello greg, send for this list a checksun this pfsense iso, i have pfsense but i not have this problems. I have pfsense 2.3.2 too, but i dont have this problem in my system... Try restore standard rules in the pfsense console,may be option 4 in console terminal...restart pfsense. but send for us the checksun for this iso... 2016-10-05 14:00 GMT-03:00 greg whynott: > Hello, > > Installed the v2.3.2 community edition today and am having a problem with > the web gui not implementing changes made. > > Any changes made via the web gui pfsense claims they are saved and asks you > to apply the changes, yet after doing so any changes made are not > reflected in the web gui or the actual config. If you refresh the page, > log out/in the changes are not shown. The don't end up in the config. I > don't know if it has anything to do with it but it *seemed* to be working > up till I added the AD authentication server. But that was the first thing > I did after IP'n the interfaces, no other changes were made up to that > point. > > As it is now, the solution can not be configured any further from the web > interface. > > Now I can't rename an interface, add an IP, change the host-name of the > system and so on. Anything you change within the web gui is lost, even > after it clams your changes have been saved. I've tried this with both a > local admin account (built in admin) and an AD admin account. behaves the > same with both. I've also tried 3 browsers, and two different machines. > Same results. > > In our environment we have an older 2.1.5 system, on the same > browsers/system the older one is functioning as expected. Since it was a > new install, I tried installing it again but it is acting the same. > > Are there any logs I can forward or look at which may provide insight? > Looking at the standard ones in /var/log/* does not reveal anything odd > looking.. > > thank you, > -greg > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > -- Atenciosamente, Rodrigo da Silva Cunha ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
[pfSense] changes made in web GUI not sticking, yet claims "saved".
Hello, Installed the v2.3.2 community edition today and am having a problem with the web gui not implementing changes made. Any changes made via the web gui pfsense claims they are saved and asks you to apply the changes, yet after doing so any changes made are not reflected in the web gui or the actual config. If you refresh the page, log out/in the changes are not shown. The don't end up in the config. I don't know if it has anything to do with it but it *seemed* to be working up till I added the AD authentication server. But that was the first thing I did after IP'n the interfaces, no other changes were made up to that point. As it is now, the solution can not be configured any further from the web interface. Now I can't rename an interface, add an IP, change the host-name of the system and so on. Anything you change within the web gui is lost, even after it clams your changes have been saved. I've tried this with both a local admin account (built in admin) and an AD admin account. behaves the same with both. I've also tried 3 browsers, and two different machines. Same results. In our environment we have an older 2.1.5 system, on the same browsers/system the older one is functioning as expected. Since it was a new install, I tried installing it again but it is acting the same. Are there any logs I can forward or look at which may provide insight? Looking at the standard ones in /var/log/* does not reveal anything odd looking.. thank you, -greg ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
Re: [pfSense] how does on create a DNS blacklist with aout 1000 or so entries?
pfblockerng = IPs squid= http/https pfblockerng under dnsbl options/settings. thats for DNS. * bind=DNS. * * you need to use one of those, and 'block' under the root domain the .cn etc. 2016-09-30 17:08 GMT-03:00 Benjamin E. Nichols: > Forgive me, but, those arent DNS Blacklists, they are just CCID ip > blacklists. > > This thread clearly has absolutely nothing to do with DNS blacklists. > > > > > On 9/30/2016 2:23 PM, Steve Yates wrote: > >> Basically, but doing it directly would avoid dealing with the >> package. I guess it's just down to how often the chosen list is updated. >> And, if it's just via allocation, aren't they done allocating IPv4 blocks... >> >> -- >> >> Steve Yates >> ITS, Inc. >> >> -Original Message- >> From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of Vick >> Khera >> Sent: Friday, September 30, 2016 2:19 PM >> To: pfSense Support and Discussion Mailing List >> Subject: Re: [pfSense] how does on create a DNS blacklist with aout 1000 >> or so entries? >> >> On Fri, Sep 30, 2016 at 12:57 PM, Doug Lytle
wrote: >> >>> On 09/30/2016 11:53 AM, Steve Yates wrote: >>> So you could keep your list somewhere else on a web server. >>> >>> This is what I do. >>> >>> And I grab the list from >>> >>> http://www.wizcrafts.net/chinese-iptables-blocklist.html >>> >>> Once a month >>> >>> Isn't this more or less what pfBlockerNG does for you automatically? >> ___ >> pfSense mailing list >> https://lists.pfsense.org/mailman/listinfo/list >> Support the project with Gold! https://pfsense.org/gold >> >> >> > -- > -- > > Signed, > > Benjamin E. Nichols > http://www.squidblacklist.org > > 1-405-397-1360 - Call Anytime. > > > ___ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > ___ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold