EPS_PS_Format?
Since LyX use only *.eps and *.ps, how can I transfer my *.bmp, *.jpeg files to *.eps (or*.ps)? Thanks
Center column with fixed size
Hi, I am using LyX 1.0.4 and I can't center a column
in a table once I have given a width to it (see the
end
of the message for an example)
1. This problem has already been asked few months ago
in
the lyx-users list but I didn't understand what is
the
latest recommended version to do that ?
2. As it is not easy for me right now to update to
latest
LyX version (compiler compatibility problems),
I have used the trick proposed by D.Tsur :
put \usepackage{array} in the preamble
and {\centering}p{width} in the
Special column alignment field in Extra
Table panel but it gives bad results. The cells
are centered (OK!) but strange horizontal
lines appear in the Table (dvi or ps) ...
Does anyone have succeeded to do that in an other
way maybe ?
Thanks in advance
Krzys
...
For example, I can't do this simple table :
-
| 1 | 2 |
-
where each column has the same fixed width
and each column is centered.
Once I have set the width I can't change
the alignment in the Table Panel, it is
automatically locked to Left.
So the best I have is :
-
| 1 | 2 |
-
And If I go to the Extra Panel and I put c
for the Special Column Alignment, it changes
the width of the column to default size !
...
__
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif
equation array and delimiter problem
hi folks! see attached files. equation array was input using the equation array utility (Ctrl-enter) matrix was input using a 2x3 matrix within a delimiter. looking at the ps file you will see the equation in the matrix is rather squashed. what I would like is the equation to look like in equation array but to have the delimiter and numbering of the matrix equation. Does anyone know how to do this as I was unable to insert a delimiter in equation array. thanks for the help Mike mk1.lyx mk1.ps
Vertical Centering of a Title Page
Greetings: I am trying to center a title page. I used a \pagebreak command to put just the title on the first page, but I need to have it centered. Can someone point me to what I need to do? Most of the LaTeX books I have only talk about horizontal centering. Thanks in advance. Michelle __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
Re: LinuxDoc: I cant nest enum and code
On Fri, Aug 03, 2001 at 05:38:37PM +0200, Yannick Patois wrote: On Fri, 3 Aug 2001, Jose Abilio Oliveira Matos wrote: You want to do something like what is done in this attachement... Thanx you very much ! That's it. In this case, the fact that the 'import' function from a linuxdoc document doesnt reconstruct this structure (that let me think that Lyx couldnt do it) should be considered as a bug ? I have fixed some bugs in sgml2lyx, but now since sgml-tools version 1 is dead I don't expect more bug fixes to it. I could have a look but that is very low priority in my todo list. And as you know linuxdoc has become obsolete with the support for docbook from the Linux Documentation Project. Yannick I'll be out for two weeks. See you. :-) -- José
Re: equation array and delimiter problem
Michael Koundouros wrote:
equation array was input using the equation array utility (Ctrl-enter)
matrix was input using a 2x3 matrix within a delimiter.
looking at the ps file you will see the equation in the matrix is rather
squashed. what I would like is the equation to look like in equation array
but to have the delimiter and numbering of the matrix equation.
Does anyone know how to do this as I was unable to insert a delimiter in
equation array.
look at your example.
there are different sizes, used by latex when you have equnarray or
array.
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
\begin_preamble
\usepackage{cite}
\usepackage{fancyhdr}
\lhead{}
\renewcommand {\sectionmark}[1]{\markright{#1}}
\rhead{\nouppercase{\rightmark}}
\end_preamble
\language british
\inputencoding auto
\fontscheme default
\graphics default
\float_placement !hbtp
\paperfontsize default
\spacing single
\papersize Default
\paperpackage widemarginsa4
\use_geometry 0
\use_amsmath 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation skip
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle fancy
\layout Standard
\begin_inset Formula \begin{eqnarray}
\varphi \left( z_{1}\right) = P\frac{-i}{2\left( s_{1}-s_{2}\right) \left(
1+is_{1}\right) }\left[ 1-\frac{z_{1}}{\sqrt{z^{2}_{1}-R^{2}\left( 1+s^{2}_{1}\right)
}}\right] \\
\psi \left( z_{2}\right) = P\frac{+i}{2\left( s_{1}-s_{2}\right) \left(
1+is_{2}\right) }\left[ 1-\frac{z_{2}}{\sqrt{z^{2}_{2}-R^{2}\left( 1+s^{2}_{2}\right)
}}\right] \label{equation array}
\end{eqnarray}
\end_inset
\layout Standard
\begin_inset Formula \begin{equation}
\label{matrix}
\left. \begin{array}{ccc}
\varphi \left( z_{1}\right) = \displaystyle {P\frac{-i}{2\left(
s_{1}-s_{2}\right) \left( 1+is_{1}\right) }\left[
1-\frac{z_{1}}{\sqrt{z^{2}_{1}-R^{2}\left( 1+s^{2}_{1}\right) }}\right] }\\
\psi \left( z_{2}\right) = \displaystyle {P\frac{+i}{2\left( s_{1}-s_{2}\right)
\left( 1+is_{2}\right) }\left[ 1-\frac{z_{2}}{\sqrt{z^{2}_{2}-R^{2}\left(
1+s^{2}_{2}\right) }}\right] }
\end{array}\right\}
\end{equation}
\end_inset
\the_end
Re: Vertical Centering of a Title Page
Michelle Dukich wrote:
Greetings:
I am trying to center a title page. I used a \pagebreak command to put just
the title on the first page, but I need to have it centered. Can someone point
me to what I need to do? Most of the LaTeX books I have only talk about
horizontal centering.
choose layout title, than write
\vspace*{\fill}your title here\vspace*{\fill}
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Re: Vertical Centering of a Title Page
* Michelle Dukich [EMAIL PROTECTED], 2001-08-04 21:37 +0200:
I am trying to center a title page. I used a \pagebreak command to put just
the title on the first page, but I need to have it centered. Can someone point
me to what I need to do? Most of the LaTeX books I have only talk about
horizontal centering.
I don't know if there is a specific LyX command; in LaTeX, I'd use
\vspace*{\fill}
\hspace*{\fill}text\hspace{\fill}
\vspace{\fill}
for vertical (vspace) and horizontal (hspace) centering.
I hope this helps.
A. B. [[EMAIL PROTECTED]]
webmaster http://www.germanistik.uni-bonn.de/
ACHTUNG: topmail samt meinem Account dort existiert nicht mehr!
PLEASE NOTE: topmail is off-line, my account is no longer valid!
Line spacing within figure float captions
Hello. I wrote an article style document in 12pt font, double-spaced, using lyx-1.1.6fix2. What I want is for *everything* to be double-spaced, including the abstract, figure captions, and so forth. Everything looks to have the spacing I want, except that my figure captions aren't double-spaced (4 lines per vertical inch), but rather appear to have one-half spacing. I have no idea why, unless there is something inherent to the caption environment that makes it so. The Question: How may I set the caption line spacing so that I get double-spaced caption text? Thanks, AC
appendix?
Hi, I am writing a report (Document Layout), but can't find Appendix option. How do I create Appendixs? Sorry I am a new to LyX, and kind of confused.
Disable date in Article layout
How can I suppress the date from printing in documents formatted with the default Article Class? -- Laurie Savage Earth Science @ Orange High School Orange, NSW, Australia
Graphics suppress new page in output
Included graphics are suppressing the page advance when I print a document. Example: 3 page document. Put graphic on page 1 - the document prints only on one sheet of paper - but each page of text overprinting. Put graphic on page 2 - page one prints ok, page 2 3 overprint on the second page. Put graphic on page 3 - document prints all three pages! -- Laurie Savage Earth Science @ Orange High School Orange, NSW, Australia
EPS_PS_Format?
Since LyX use only *.eps and *.ps, how can I transfer my *.bmp, *.jpeg files to *.eps (or*.ps)? Thanks
Center column with fixed size
Hi, I am using LyX 1.0.4 and I can't center a column
in a table once I have given a width to it (see the
end
of the message for an example)
1. This problem has already been asked few months ago
in
the lyx-users list but I didn't understand what is
the
latest recommended version to do that ?
2. As it is not easy for me right now to update to
latest
LyX version (compiler compatibility problems),
I have used the trick proposed by D.Tsur :
put \usepackage{array} in the preamble
and {\centering}p{width} in the
Special column alignment field in Extra
Table panel but it gives bad results. The cells
are centered (OK!) but strange horizontal
lines appear in the Table (dvi or ps) ...
Does anyone have succeeded to do that in an other
way maybe ?
Thanks in advance
Krzys
...
For example, I can't do this simple table :
-
| 1 | 2 |
-
where each column has the same fixed width
and each column is centered.
Once I have set the width I can't change
the alignment in the Table Panel, it is
automatically locked to Left.
So the best I have is :
-
| 1 | 2 |
-
And If I go to the Extra Panel and I put c
for the Special Column Alignment, it changes
the width of the column to default size !
...
__
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif
equation array and delimiter problem
hi folks! see attached files. equation array was input using the equation array utility (Ctrl-enter) matrix was input using a 2x3 matrix within a delimiter. looking at the ps file you will see the equation in the matrix is rather squashed. what I would like is the equation to look like in equation array but to have the delimiter and numbering of the matrix equation. Does anyone know how to do this as I was unable to insert a delimiter in equation array. thanks for the help Mike mk1.lyx mk1.ps
Vertical Centering of a Title Page
Greetings: I am trying to center a title page. I used a \pagebreak command to put just the title on the first page, but I need to have it centered. Can someone point me to what I need to do? Most of the LaTeX books I have only talk about horizontal centering. Thanks in advance. Michelle __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
Re: LinuxDoc: I cant nest enum and code
On Fri, Aug 03, 2001 at 05:38:37PM +0200, Yannick Patois wrote: On Fri, 3 Aug 2001, Jose Abilio Oliveira Matos wrote: You want to do something like what is done in this attachement... Thanx you very much ! That's it. In this case, the fact that the 'import' function from a linuxdoc document doesnt reconstruct this structure (that let me think that Lyx couldnt do it) should be considered as a bug ? I have fixed some bugs in sgml2lyx, but now since sgml-tools version 1 is dead I don't expect more bug fixes to it. I could have a look but that is very low priority in my todo list. And as you know linuxdoc has become obsolete with the support for docbook from the Linux Documentation Project. Yannick I'll be out for two weeks. See you. :-) -- José
Re: equation array and delimiter problem
Michael Koundouros wrote:
equation array was input using the equation array utility (Ctrl-enter)
matrix was input using a 2x3 matrix within a delimiter.
looking at the ps file you will see the equation in the matrix is rather
squashed. what I would like is the equation to look like in equation array
but to have the delimiter and numbering of the matrix equation.
Does anyone know how to do this as I was unable to insert a delimiter in
equation array.
look at your example.
there are different sizes, used by latex when you have equnarray or
array.
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
\begin_preamble
\usepackage{cite}
\usepackage{fancyhdr}
\lhead{}
\renewcommand {\sectionmark}[1]{\markright{#1}}
\rhead{\nouppercase{\rightmark}}
\end_preamble
\language british
\inputencoding auto
\fontscheme default
\graphics default
\float_placement !hbtp
\paperfontsize default
\spacing single
\papersize Default
\paperpackage widemarginsa4
\use_geometry 0
\use_amsmath 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation skip
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle fancy
\layout Standard
\begin_inset Formula \begin{eqnarray}
\varphi \left( z_{1}\right) = P\frac{-i}{2\left( s_{1}-s_{2}\right) \left(
1+is_{1}\right) }\left[ 1-\frac{z_{1}}{\sqrt{z^{2}_{1}-R^{2}\left( 1+s^{2}_{1}\right)
}}\right] \\
\psi \left( z_{2}\right) = P\frac{+i}{2\left( s_{1}-s_{2}\right) \left(
1+is_{2}\right) }\left[ 1-\frac{z_{2}}{\sqrt{z^{2}_{2}-R^{2}\left( 1+s^{2}_{2}\right)
}}\right] \label{equation array}
\end{eqnarray}
\end_inset
\layout Standard
\begin_inset Formula \begin{equation}
\label{matrix}
\left. \begin{array}{ccc}
\varphi \left( z_{1}\right) = \displaystyle {P\frac{-i}{2\left(
s_{1}-s_{2}\right) \left( 1+is_{1}\right) }\left[
1-\frac{z_{1}}{\sqrt{z^{2}_{1}-R^{2}\left( 1+s^{2}_{1}\right) }}\right] }\\
\psi \left( z_{2}\right) = \displaystyle {P\frac{+i}{2\left( s_{1}-s_{2}\right)
\left( 1+is_{2}\right) }\left[ 1-\frac{z_{2}}{\sqrt{z^{2}_{2}-R^{2}\left(
1+s^{2}_{2}\right) }}\right] }
\end{array}\right\}
\end{equation}
\end_inset
\the_end
Re: Vertical Centering of a Title Page
Michelle Dukich wrote:
Greetings:
I am trying to center a title page. I used a \pagebreak command to put just
the title on the first page, but I need to have it centered. Can someone point
me to what I need to do? Most of the LaTeX books I have only talk about
horizontal centering.
choose layout title, than write
\vspace*{\fill}your title here\vspace*{\fill}
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Re: Vertical Centering of a Title Page
* Michelle Dukich [EMAIL PROTECTED], 2001-08-04 21:37 +0200:
I am trying to center a title page. I used a \pagebreak command to put just
the title on the first page, but I need to have it centered. Can someone point
me to what I need to do? Most of the LaTeX books I have only talk about
horizontal centering.
I don't know if there is a specific LyX command; in LaTeX, I'd use
\vspace*{\fill}
\hspace*{\fill}text\hspace{\fill}
\vspace{\fill}
for vertical (vspace) and horizontal (hspace) centering.
I hope this helps.
A. B. [[EMAIL PROTECTED]]
webmaster http://www.germanistik.uni-bonn.de/
ACHTUNG: topmail samt meinem Account dort existiert nicht mehr!
PLEASE NOTE: topmail is off-line, my account is no longer valid!
Line spacing within figure float captions
Hello. I wrote an article style document in 12pt font, double-spaced, using lyx-1.1.6fix2. What I want is for *everything* to be double-spaced, including the abstract, figure captions, and so forth. Everything looks to have the spacing I want, except that my figure captions aren't double-spaced (4 lines per vertical inch), but rather appear to have one-half spacing. I have no idea why, unless there is something inherent to the caption environment that makes it so. The Question: How may I set the caption line spacing so that I get double-spaced caption text? Thanks, AC
appendix?
Hi, I am writing a report (Document Layout), but can't find Appendix option. How do I create Appendixs? Sorry I am a new to LyX, and kind of confused.
Disable date in Article layout
How can I suppress the date from printing in documents formatted with the default Article Class? -- Laurie Savage Earth Science @ Orange High School Orange, NSW, Australia
Graphics suppress new page in output
Included graphics are suppressing the page advance when I print a document. Example: 3 page document. Put graphic on page 1 - the document prints only on one sheet of paper - but each page of text overprinting. Put graphic on page 2 - page one prints ok, page 2 3 overprint on the second page. Put graphic on page 3 - document prints all three pages! -- Laurie Savage Earth Science @ Orange High School Orange, NSW, Australia
EPS_PS_Format?
Since LyX use only *.eps and *.ps, how can I transfer my *.bmp, *.jpeg files to *.eps (or*.ps)? Thanks
Center column with fixed size
Hi, I am using LyX 1.0.4 and I can't center a column
in a table once I have given a width to it (see the
end
of the message for an example)
1. This problem has already been asked few months ago
in
the lyx-users list but I didn't understand what is
the
latest recommended version to do that ?
2. As it is not easy for me right now to update to
latest
LyX version (compiler compatibility problems),
I have used the trick proposed by D.Tsur :
put "\usepackage{array}" in the preamble
and ">{\centering}p{}" in the
Special column alignment field in Extra
Table panel but it gives bad results. The cells
are centered (OK!) but strange horizontal
lines appear in the Table (dvi or ps) ...
Does anyone have succeeded to do that in an other
way maybe ?
Thanks in advance
Krzys
...
For example, I can't do this simple table :
-
| 1 | 2 |
-
where each column has the same fixed width
and each column is centered.
Once I have set the width I can't change
the alignment in the Table Panel, it is
automatically locked to "Left".
So the best I have is :
-
| 1 | 2 |
-
And If I go to the Extra Panel and I put "c"
for the Special Column Alignment, it changes
the width of the column to default size !
...
__
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif
equation array and delimiter problem
hi folks! see attached files. "equation array" was input using the equation array utility (Ctrl-enter) "matrix" was input using a 2x3 matrix within a delimiter. looking at the ps file you will see the equation in the matrix is rather squashed. what I would like is the equation to look like in "equation array" but to have the delimiter and numbering of the "matrix" equation. Does anyone know how to do this as I was unable to insert a delimiter in "equation array". thanks for the help Mike mk1.lyx mk1.ps
Vertical Centering of a Title Page
Greetings: I am trying to center a title page. I used a \pagebreak command to put just the title on the first page, but I need to have it centered. Can someone point me to what I need to do? Most of the LaTeX books I have only talk about horizontal centering. Thanks in advance. Michelle __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
Re: LinuxDoc: I cant nest and
On Fri, Aug 03, 2001 at 05:38:37PM +0200, Yannick Patois wrote: > On Fri, 3 Aug 2001, Jose Abilio Oliveira Matos wrote: > > > You want to do something like what is done in this attachement... > > Thanx you very much ! > That's it. > > In this case, the fact that the 'import' function from a linuxdoc document > doesnt reconstruct this structure (that let me think that Lyx couldnt do > it) should be considered as a bug ? I have fixed some bugs in sgml2lyx, but now since sgml-tools version 1 is dead I don't expect more bug fixes to it. I could have a look but that is very low priority in my todo list. And as you know linuxdoc has become obsolete with the support for docbook from the Linux Documentation Project. > Yannick I'll be out for two weeks. See you. :-) -- José
Re: equation array and delimiter problem
Michael Koundouros wrote:
>
> "equation array" was input using the equation array utility (Ctrl-enter)
> "matrix" was input using a 2x3 matrix within a delimiter.
>
> looking at the ps file you will see the equation in the matrix is rather
> squashed. what I would like is the equation to look like in "equation array"
> but to have the delimiter and numbering of the "matrix" equation.
>
> Does anyone know how to do this as I was unable to insert a delimiter in
> "equation array".
look at your example.
there are different sizes, used by latex when you have equnarray or
array.
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
\begin_preamble
\usepackage{cite}
\usepackage{fancyhdr}
\lhead{}
\renewcommand {\sectionmark}[1]{\markright{#1}}
\rhead{\nouppercase{\rightmark}}
\end_preamble
\language british
\inputencoding auto
\fontscheme default
\graphics default
\float_placement !hbtp
\paperfontsize default
\spacing single
\papersize Default
\paperpackage widemarginsa4
\use_geometry 0
\use_amsmath 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation skip
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle fancy
\layout Standard
\begin_inset Formula \begin{eqnarray}
\varphi \left( z_{1}\right) & = & P\frac{-i}{2\left( s_{1}-s_{2}\right) \left(
1+is_{1}\right) }\left[ 1-\frac{z_{1}}{\sqrt{z^{2}_{1}-R^{2}\left( 1+s^{2}_{1}\right)
}}\right] \\
\psi \left( z_{2}\right) & = & P\frac{+i}{2\left( s_{1}-s_{2}\right) \left(
1+is_{2}\right) }\left[ 1-\frac{z_{2}}{\sqrt{z^{2}_{2}-R^{2}\left( 1+s^{2}_{2}\right)
}}\right] \label{equation array}
\end{eqnarray}
\end_inset
\layout Standard
\begin_inset Formula \begin{equation}
\label{matrix}
\left. \begin{array}{ccc}
\varphi \left( z_{1}\right) & = & \displaystyle {P\frac{-i}{2\left(
s_{1}-s_{2}\right) \left( 1+is_{1}\right) }\left[
1-\frac{z_{1}}{\sqrt{z^{2}_{1}-R^{2}\left( 1+s^{2}_{1}\right) }}\right] }\\
\psi \left( z_{2}\right) & = & \displaystyle {P\frac{+i}{2\left( s_{1}-s_{2}\right)
\left( 1+is_{2}\right) }\left[ 1-\frac{z_{2}}{\sqrt{z^{2}_{2}-R^{2}\left(
1+s^{2}_{2}\right) }}\right] }
\end{array}\right\}
\end{equation}
\end_inset
\the_end
Re: Vertical Centering of a Title Page
Michelle Dukich wrote:
>
>
> Greetings:
>
> I am trying to center a title page. I used a \pagebreak command to put just
> the title on the first page, but I need to have it centered. Can someone point
> me to what I need to do? Most of the LaTeX books I have only talk about
> horizontal centering.
choose layout title, than write
\vspace*{\fill}your title here\vspace*{\fill}
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Re: Vertical Centering of a Title Page
* Michelle Dukich <[EMAIL PROTECTED]>, 2001-08-04 21:37 +0200:
> I am trying to center a title page. I used a \pagebreak command to put just
> the title on the first page, but I need to have it centered. Can someone point
> me to what I need to do? Most of the LaTeX books I have only talk about
> horizontal centering.
I don't know if there is a specific LyX command; in LaTeX, I'd use
\vspace*{\fill}
\hspace*{\fill}text\hspace{\fill}
\vspace{\fill}
for vertical (vspace) and horizontal (hspace) centering.
I hope this helps.
A. B. [[EMAIL PROTECTED]]
webmaster http://www.germanistik.uni-bonn.de/
ACHTUNG: topmail samt meinem Account dort existiert nicht mehr!
PLEASE NOTE: topmail is off-line, my account is no longer valid!
Line spacing within figure float captions
Hello. I wrote an "article" style document in 12pt font, double-spaced, using lyx-1.1.6fix2. What I want is for *everything* to be double-spaced, including the abstract, figure captions, and so forth. Everything looks to have the spacing I want, except that my figure captions aren't double-spaced (4 lines per vertical inch), but rather appear to have one-half spacing. I have no idea why, unless there is something inherent to the caption environment that makes it so. The Question: How may I set the caption line spacing so that I get double-spaced caption text? Thanks, AC
appendix?
Hi, I am writing a report (Document Layout), but can't find Appendix option. How do I create Appendixs? Sorry I am a new to LyX, and kind of confused.
Disable date in Article layout
How can I suppress the date from printing in documents formatted with the default Article Class? -- Laurie Savage Earth Science @ Orange High School Orange, NSW, Australia
Graphics suppress new page in output
Included graphics are suppressing the page advance when I print a document. Example: 3 page document. Put graphic on page 1 -> the document prints only on one sheet of paper - but each page of text overprinting. Put graphic on page 2 -> page one prints ok, page 2 & 3 overprint on the second page. Put graphic on page 3 -> document prints all three pages! -- Laurie Savage Earth Science @ Orange High School Orange, NSW, Australia
