Re: Footnote Symbol Placement too Low

[Guenter Milde]

On 2009-09-17, Rob wrote:
 Hi,

 I have a footnote on some text that is largest font (base=12) where the 
 footnote
 symbol resides only half-way up to the height of the preceding letter.  

 How can I change this to put it in the standard position (slightly above the
 preceding letter).  The footnote placements are fine for the normalsize text 
 in
 my document.

Is the footnote symbol still LARGE?

You will either need to include the footnote in the large text part (and
eventually set the content back to footnotesize) or use raw LaTeX (ERT)
for a \raisebox.

Günter

Re: Box arrow

[Guenter Milde]

On 2009-09-17, Manolo Martí­nez wrote:
 I see. Reading the link below I've found out I need \boxright and 
 \boxleft from txfonts; but these do not appear in the equation dialogue 
 -although I do have txfonts installed. I cannot simply embed an ERT in 
 the middle of an equation, can I? 

You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter

Re: [Survey] Explicit subject tag on this list

[Manveru]

2009/9/17 Andre Poenitz andre.poen...@mathematik.tu-chemnitz.de

 [...]

 That's not really surprising for a page that needs creating an account.
 I am even surprised that 36 people voted...

 Andre'


I am surprised you said that. I've tested and voting was possible without
logging in. I've just enter the survey from a PC that had never been on
polldaddy.com and the survey is open. And nobody else complains about
logging in.

-- 
Manveru
jabber: manv...@manveru.pl
gg: 1624001
  http://www.manveru.pl

Disable autosaving

[Luca Carlon]

Hi! Is it possible somehow to disable autosaving? I'm experiencing a bug with
autosaving related to Snow Leopard, and I would relly like to disable
autosaving. The checkbox in the preferencing seems to be broken (reported this
bug). I disabled it and changed the interval, but I still get autosavings every
5 minutes. Is there any other way to stop autosaving?
Thanks!

Luca

Re: Box arrow

[Manolo Martí­nez]

OK, that can be done, indeed. But my installation does not seem to 
understand \boxright. The pdf output simply shows  pboxrightq where 
the symbol should have been...


Manolo



Guenter Milde escribió: shows

On 2009-09-17, Manolo Martí­nez wrote:
  
I see. Reading the link below I've found out I need \boxright and 
\boxleft from txfonts; but these do not appear in the equation dialogue 
-although I do have txfonts installed. I cannot simply embed an ERT in 
the middle of an equation, can I? 



You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter


  

Re: [Survey] Explicit subject tag on this list

[Trevor Jenkins]

On Fri, Sep 18, 2009 at 7:56 AM, Manveru manv...@manveru.pl wrote:

 2009/9/17 Andre Poenitz andre.poen...@mathematik.tu-chemnitz.de

  That's not really surprising for a page that needs creating an account.
  I am even surprised that 36 people voted...

 I am surprised you said that. I've tested and voting was possible without
 logging in. I've just enter the survey from a PC that had never been on
 polldaddy.com and the survey is open. And nobody else complains about
 logging in.


Don't how you tested but it asked me to login before I could do anything
else. ergo I ignored the survey.

Regards, Trevor.
 Re: deemed!

Re: Footnote Symbol Placement too Low

[Rob]

Hi Gunter,

Even when the footnote is set to the large font (and the footnote text is then
large), the symbol for the footnote in my text is still the default small size
and still in the wrong place. 

If \raisebox is the only solution, could you suggest how to use \raisebox for
just the footnote symbol in a single instance?  

Thanks.
Rob

greek accent does not work in the editor

[psykasso]

Hello, when i press the ; character before a vowel greek letter to get a
accent to it, it does not work. The problem is that it appears only in lyx
because everywhere it is operational eg. ά ή ... I tried various language
setting but with no results. I use lyx 1.6.4 and my os is gentoo.

Kostas

Re: Once again: Margin alignment

[jezZiFeR]

Thank you!
Unfortunately nothing changed, still no notable optical margin  
alignment, although the factor of 1000 is the maximum. Could it be,  
that the microtype-package is not properly installed? How could I  
check this?


Thanks again!
Best*
E.


Am 18.09.2009 um 14:30 schrieb rgheck:


On 09/18/2009 03:22 AM, jezZiFeR wrote:

Hello,

yes, that´s what I´ve read, too, but I don´t know how to enter  
that. Up to now I just use this one command in the preamble:

\usepackage{microtype}

I don´t know LaTeX, so I don´t know (and where) how to enter that  
factor. Maybe it is obvious, but I don´t get it, sorry…



\usepackage[factor=1000]{microtype}

Optional arguments are always entered like that.

rh

Re: Box arrow

[Manolo Martí­nez]

The problem was that, when I wrote '\boxright', Lyx, for some reason 
added an extra '\'. Once I've noticed this in the source window, I've 
fiddled with it till it has disappeared -it works when adding a space 
after \boxright- and now it's perfect.


Thanks!

Manolo



Guenter Milde escribió: shows

On 2009-09-17, Manolo Martí­nez wrote:
  
I see. Reading the link below I've found out I need \boxright and 
\boxleft from txfonts; but these do not appear in the equation dialogue 
-although I do have txfonts installed. I cannot simply embed an ERT in 
the middle of an equation, can I? 



You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter


  

Text Width in viewer

[Rob]

Hi,

How do I alter the text width in the editor?  That is, where is the
non-fullscreen-view option to set text width (the option that would correspond
to the fullscreen-view option in Tools-Preferences-Editing)?

Thanks.

Rob

Renumbering footnotes after each section

[jbutzu]

Hello.  Recently I have downloaded LyX and read the tutorial, etc.  I would
like to see my footnotes for each section renumbered starting with 1.  I am
using the unordered section* selection from the paragraph environment
followed by a verse and then a new section.  I tried inserting the code
\...@addtoreset{footnote}{section} in the document preamble and still
nothing.  I even tried rewriting the preamble as
\...@addtoreset{footnote}{section*} with an * over the section to try getting
it to work.  Still nothing.  Do i need to download something else or am I
just missing a crucial element in using LyX?  I have the document class set
to book.  Thank you in advance.

John
-- 
View this message in context: 
http://n2.nabble.com/Renumbering-footnotes-after-each-section-tp3673195p3673195.html
Sent from the LyX - Users mailing list archive at Nabble.com.

Re: Renumbering footnotes after each section

[rgheck]

On 09/18/2009 09:34 PM, jbutzu wrote:

Hello.  Recently I have downloaded LyX and read the tutorial, etc.  I would
like to see my footnotes for each section renumbered starting with 1.  I am
using the unordered section* selection from the paragraph environment
followed by a verse and then a new section.  I tried inserting the code
\...@addtoreset{footnote}{section} in the document preamble and still
nothing.  I even tried rewriting the preamble as
\...@addtoreset{footnote}{section*} with an * over the section to try getting
it to work.  Still nothing.  Do i need to download something else or am I
just missing a crucial element in using LyX?  I have the document class set
to book.  Thank you in advance.

   
Hmm. Never noticed this, but it does seem that \...@addtoreset doesn't work 
with starred environments. Try this:


\let\oldsec=\section

\def\section{\setcounter{footnote}{0}\oldsec}


That will do all sections and starred sections.

Richard

Re: Footnote Symbol Placement too Low

[Guenter Milde]

On 2009-09-17, Rob wrote:
 Hi,

 I have a footnote on some text that is largest font (base=12) where the 
 footnote
 symbol resides only half-way up to the height of the preceding letter.  

 How can I change this to put it in the standard position (slightly above the
 preceding letter).  The footnote placements are fine for the normalsize text 
 in
 my document.

Is the footnote symbol still LARGE?

You will either need to include the footnote in the large text part (and
eventually set the content back to footnotesize) or use raw LaTeX (ERT)
for a \raisebox.

Günter

Re: Box arrow

[Guenter Milde]

On 2009-09-17, Manolo Martí­nez wrote:
 I see. Reading the link below I've found out I need \boxright and 
 \boxleft from txfonts; but these do not appear in the equation dialogue 
 -although I do have txfonts installed. I cannot simply embed an ERT in 
 the middle of an equation, can I? 

You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter

Re: [Survey] Explicit subject tag on this list

[Manveru]

2009/9/17 Andre Poenitz andre.poen...@mathematik.tu-chemnitz.de

 [...]

 That's not really surprising for a page that needs creating an account.
 I am even surprised that 36 people voted...

 Andre'


I am surprised you said that. I've tested and voting was possible without
logging in. I've just enter the survey from a PC that had never been on
polldaddy.com and the survey is open. And nobody else complains about
logging in.

-- 
Manveru
jabber: manv...@manveru.pl
gg: 1624001
  http://www.manveru.pl

Disable autosaving

[Luca Carlon]

Hi! Is it possible somehow to disable autosaving? I'm experiencing a bug with
autosaving related to Snow Leopard, and I would relly like to disable
autosaving. The checkbox in the preferencing seems to be broken (reported this
bug). I disabled it and changed the interval, but I still get autosavings every
5 minutes. Is there any other way to stop autosaving?
Thanks!

Luca

Re: Box arrow

[Manolo Martí­nez]

OK, that can be done, indeed. But my installation does not seem to 
understand \boxright. The pdf output simply shows  pboxrightq where 
the symbol should have been...


Manolo



Guenter Milde escribió: shows

On 2009-09-17, Manolo Martí­nez wrote:
  
I see. Reading the link below I've found out I need \boxright and 
\boxleft from txfonts; but these do not appear in the equation dialogue 
-although I do have txfonts installed. I cannot simply embed an ERT in 
the middle of an equation, can I? 



You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter


  

Re: [Survey] Explicit subject tag on this list

[Trevor Jenkins]

On Fri, Sep 18, 2009 at 7:56 AM, Manveru manv...@manveru.pl wrote:

 2009/9/17 Andre Poenitz andre.poen...@mathematik.tu-chemnitz.de

  That's not really surprising for a page that needs creating an account.
  I am even surprised that 36 people voted...

 I am surprised you said that. I've tested and voting was possible without
 logging in. I've just enter the survey from a PC that had never been on
 polldaddy.com and the survey is open. And nobody else complains about
 logging in.


Don't how you tested but it asked me to login before I could do anything
else. ergo I ignored the survey.

Regards, Trevor.
 Re: deemed!

Re: Footnote Symbol Placement too Low

[Rob]

Hi Gunter,

Even when the footnote is set to the large font (and the footnote text is then
large), the symbol for the footnote in my text is still the default small size
and still in the wrong place. 

If \raisebox is the only solution, could you suggest how to use \raisebox for
just the footnote symbol in a single instance?  

Thanks.
Rob

greek accent does not work in the editor

[psykasso]

Hello, when i press the ; character before a vowel greek letter to get a
accent to it, it does not work. The problem is that it appears only in lyx
because everywhere it is operational eg. ά ή ... I tried various language
setting but with no results. I use lyx 1.6.4 and my os is gentoo.

Kostas

Re: Once again: Margin alignment

[jezZiFeR]

Thank you!
Unfortunately nothing changed, still no notable optical margin  
alignment, although the factor of 1000 is the maximum. Could it be,  
that the microtype-package is not properly installed? How could I  
check this?


Thanks again!
Best*
E.


Am 18.09.2009 um 14:30 schrieb rgheck:


On 09/18/2009 03:22 AM, jezZiFeR wrote:

Hello,

yes, that´s what I´ve read, too, but I don´t know how to enter  
that. Up to now I just use this one command in the preamble:

\usepackage{microtype}

I don´t know LaTeX, so I don´t know (and where) how to enter that  
factor. Maybe it is obvious, but I don´t get it, sorry…



\usepackage[factor=1000]{microtype}

Optional arguments are always entered like that.

rh

Re: Box arrow

[Manolo Martí­nez]

The problem was that, when I wrote '\boxright', Lyx, for some reason 
added an extra '\'. Once I've noticed this in the source window, I've 
fiddled with it till it has disappeared -it works when adding a space 
after \boxright- and now it's perfect.


Thanks!

Manolo



Guenter Milde escribió: shows

On 2009-09-17, Manolo Martí­nez wrote:
  
I see. Reading the link below I've found out I need \boxright and 
\boxleft from txfonts; but these do not appear in the equation dialogue 
-although I do have txfonts installed. I cannot simply embed an ERT in 
the middle of an equation, can I? 



You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter


  

Text Width in viewer

[Rob]

Hi,

How do I alter the text width in the editor?  That is, where is the
non-fullscreen-view option to set text width (the option that would correspond
to the fullscreen-view option in Tools-Preferences-Editing)?

Thanks.

Rob

Renumbering footnotes after each section

[jbutzu]

Hello.  Recently I have downloaded LyX and read the tutorial, etc.  I would
like to see my footnotes for each section renumbered starting with 1.  I am
using the unordered section* selection from the paragraph environment
followed by a verse and then a new section.  I tried inserting the code
\...@addtoreset{footnote}{section} in the document preamble and still
nothing.  I even tried rewriting the preamble as
\...@addtoreset{footnote}{section*} with an * over the section to try getting
it to work.  Still nothing.  Do i need to download something else or am I
just missing a crucial element in using LyX?  I have the document class set
to book.  Thank you in advance.

John
-- 
View this message in context: 
http://n2.nabble.com/Renumbering-footnotes-after-each-section-tp3673195p3673195.html
Sent from the LyX - Users mailing list archive at Nabble.com.

Re: Renumbering footnotes after each section

[rgheck]

On 09/18/2009 09:34 PM, jbutzu wrote:

Hello.  Recently I have downloaded LyX and read the tutorial, etc.  I would
like to see my footnotes for each section renumbered starting with 1.  I am
using the unordered section* selection from the paragraph environment
followed by a verse and then a new section.  I tried inserting the code
\...@addtoreset{footnote}{section} in the document preamble and still
nothing.  I even tried rewriting the preamble as
\...@addtoreset{footnote}{section*} with an * over the section to try getting
it to work.  Still nothing.  Do i need to download something else or am I
just missing a crucial element in using LyX?  I have the document class set
to book.  Thank you in advance.

   
Hmm. Never noticed this, but it does seem that \...@addtoreset doesn't work 
with starred environments. Try this:


\let\oldsec=\section

\def\section{\setcounter{footnote}{0}\oldsec}


That will do all sections and starred sections.

Richard

Re: Footnote Symbol Placement too Low

[Guenter Milde]

On 2009-09-17, Rob wrote:
> Hi,

> I have a footnote on some text that is largest font (base=12) where the 
> footnote
> symbol resides only half-way up to the height of the preceding letter.  

> How can I change this to put it in the standard position (slightly above the
> preceding letter).  The footnote placements are fine for the normalsize text 
> in
> my document.

Is the footnote symbol still LARGE?

You will either need to include the footnote in the large text part (and
eventually set the content back to footnotesize) or use raw LaTeX (ERT)
for a \raisebox.

Günter

Re: Box arrow

[Guenter Milde]

On 2009-09-17, Manolo Martí­nez wrote:
> I see. Reading the link below I've found out I need \boxright and 
> \boxleft from txfonts; but these do not appear in the equation dialogue 
> -although I do have txfonts installed. I cannot simply embed an ERT in 
> the middle of an equation, can I? 

You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter

Re: [Survey] Explicit subject tag on this list

[Manveru]

2009/9/17 Andre Poenitz 

> [...]
>
> That's not really surprising for a page that needs creating an account.
> I am even surprised that 36 people voted...
>
> Andre'
>

I am surprised you said that. I've tested and voting was possible without
logging in. I've just enter the survey from a PC that had never been on
polldaddy.com and the survey is open. And nobody else complains about
logging in.

-- 
Manveru
jabber: manv...@manveru.pl
gg: 1624001
  http://www.manveru.pl

Disable autosaving

[Luca Carlon]

Hi! Is it possible somehow to disable autosaving? I'm experiencing a bug with
autosaving related to Snow Leopard, and I would relly like to disable
autosaving. The checkbox in the preferencing seems to be broken (reported this
bug). I disabled it and changed the interval, but I still get autosavings every
5 minutes. Is there any other way to stop autosaving?
Thanks!

Luca

Re: Box arrow

[Manolo Martí­nez]

OK, that can be done, indeed. But my installation does not seem to 
understand \boxright. The pdf output simply shows  "pboxrightq" where 
the symbol should have been...


Manolo



Guenter Milde escribió: shows

On 2009-09-17, Manolo Martí­nez wrote:
  
I see. Reading the link below I've found out I need \boxright and 
\boxleft from txfonts; but these do not appear in the equation dialogue 
-although I do have txfonts installed. I cannot simply embed an ERT in 
the middle of an equation, can I? 



You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter


  

Re: [Survey] Explicit subject tag on this list

[Trevor Jenkins]

On Fri, Sep 18, 2009 at 7:56 AM, Manveru  wrote:

> 2009/9/17 Andre Poenitz 
>
> > That's not really surprising for a page that needs creating an account.
> > I am even surprised that 36 people voted...
>
> I am surprised you said that. I've tested and voting was possible without
> logging in. I've just enter the survey from a PC that had never been on
> polldaddy.com and the survey is open. And nobody else complains about
> logging in.


Don't how you tested but it asked me to login before I could do anything
else. ergo I ignored the survey.

Regards, Trevor.
<>< Re: deemed!

Re: Footnote Symbol Placement too Low

[Rob]

Hi Gunter,

Even when the footnote is set to the large font (and the footnote text is then
large), the symbol for the footnote in my text is still the default small size
and still in the wrong place. 

If \raisebox is the only solution, could you suggest how to use \raisebox for
just the footnote symbol in a single instance?  

Thanks.
Rob

greek accent does not work in the editor

[psykasso]

Hello, when i press the ; character before a vowel greek letter to get a
accent to it, it does not work. The problem is that it appears only in lyx
because everywhere it is operational eg. ά ή ... I tried various language
setting but with no results. I use lyx 1.6.4 and my os is gentoo.

Kostas

Re: Once again: Margin alignment

[jezZiFeR]

Thank you!
Unfortunately nothing changed, still no notable optical margin  
alignment, although the factor of 1000 is the maximum. Could it be,  
that the microtype-package is not properly installed? How could I  
check this?


Thanks again!
Best*
E.


Am 18.09.2009 um 14:30 schrieb rgheck:


On 09/18/2009 03:22 AM, jezZiFeR wrote:

Hello,

yes, that´s what I´ve read, too, but I don´t know how to enter  
that. Up to now I just use this one command in the preamble:

\usepackage{microtype}

I don´t know LaTeX, so I don´t know (and where) how to enter that  
factor. Maybe it is obvious, but I don´t get it, sorry…



\usepackage[factor=1000]{microtype}

Optional arguments are always entered like that.

rh

Re: Box arrow

[Manolo Martí­nez]

The problem was that, when I wrote '\boxright', Lyx, for some reason 
added an extra '\'. Once I've noticed this in the source window, I've 
fiddled with it till it has disappeared -it works when adding a space 
after \boxright- and now it's perfect.


Thanks!

Manolo



Guenter Milde escribió: shows

On 2009-09-17, Manolo Martí­nez wrote:
  
I see. Reading the link below I've found out I need \boxright and 
\boxleft from txfonts; but these do not appear in the equation dialogue 
-although I do have txfonts installed. I cannot simply embed an ERT in 
the middle of an equation, can I? 



You can. Just write it (without trying to open an ERT-inset). In the math
box, everything that LyX does not understand is left as ERT.

Günter


  

Text Width in viewer

[Rob]

Hi,

How do I alter the text width in the editor?  That is, where is the
non-fullscreen-view option to set text width (the option that would correspond
to the fullscreen-view option in Tools->Preferences->Editing)?

Thanks.

Rob

Renumbering footnotes after each section

[jbutzu]

Hello.  Recently I have downloaded LyX and read the tutorial, etc.  I would
like to see my footnotes for each section renumbered starting with 1.  I am
using the unordered section* selection from the paragraph environment
followed by a verse and then a new section.  I tried inserting the code
"\...@addtoreset{footnote}{section}" in the document preamble and still
nothing.  I even tried rewriting the preamble as
"\...@addtoreset{footnote}{section*}" with an * over the section to try getting
it to work.  Still nothing.  Do i need to download something else or am I
just missing a crucial element in using LyX?  I have the document class set
to "book".  Thank you in advance.

John
-- 
View this message in context: 
http://n2.nabble.com/Renumbering-footnotes-after-each-section-tp3673195p3673195.html
Sent from the LyX - Users mailing list archive at Nabble.com.

Re: Renumbering footnotes after each section

[rgheck]

On 09/18/2009 09:34 PM, jbutzu wrote:

Hello.  Recently I have downloaded LyX and read the tutorial, etc.  I would
like to see my footnotes for each section renumbered starting with 1.  I am
using the unordered section* selection from the paragraph environment
followed by a verse and then a new section.  I tried inserting the code
"\...@addtoreset{footnote}{section}" in the document preamble and still
nothing.  I even tried rewriting the preamble as
"\...@addtoreset{footnote}{section*}" with an * over the section to try getting
it to work.  Still nothing.  Do i need to download something else or am I
just missing a crucial element in using LyX?  I have the document class set
to "book".  Thank you in advance.

   
Hmm. Never noticed this, but it does seem that \...@addtoreset doesn't work 
with starred environments. Try this:


\let\oldsec=\section

\def\section{\setcounter{footnote}{0}\oldsec}


That will do all sections and starred sections.

Richard