Re: Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: http://www.taljaren.se/MinLyXTutorial.html (same as pdf) http://www.taljaren.se/MinLyXTutorial.pdf This is great, do you know how to do on Windows? I did everything as you described (with Perl insted of C++), but if i want to see a dvi preview i get folowing error: LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found ...d__daten_prog_perl_myscript.tex} } ***(cannot \read drom terminal in nonstop modes) -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
[WIN] Embedding highlighed external source code files in a LyX document
I modifierd the subject, because i think tracing will be easyer.
Gunnar Lindholm schrieb:
But the hightlight program works fine?
Yes
I did everything as you described (with Perl insted of C++), but if i
want to see a dvi preview i get folowing error:
LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found
...d__daten_prog_perl_myscript.tex}
}
***(cannot \read drom terminal in nonstop modes)
Can you view postscript or pdf?
No both generate the same error, like above.
Can you export from command line lyx -e pdf mein_buch.lyx?
No, i get:
Error: File could not be exportet
There are no information how to export the format pdf
This is my traslation
Do you have any problem with including other external material?
Yes it seen so:
...raphics{0d__daten_realplayer_registration}
I could not locate the file with any of these extensions:
.eps,.ps,.eps.gz,.ps.gz,.eps.Z
Try typing return to proceed.
If that doesn't work, type X return to quit.
I'm not sure, but I don't wan't to write-off the problem with the file
/etc/texmf/dvips/config/config.ps (in linux system, but I think you have a
similar?)
Yes, on my system it's located in C:\Programme\MiKTeX 2.5\dvips\config
If it says z1 in your file, change to z0. I had similar problems until I
changed it to z0.
Does that help?
Noop, nothing changes.
Yours
Roland
Re: [WIN] Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: LyX version 1.4.4 ? I've only tried it with 1.4.* versions. I use 1.4.3-4 Noop, nothing changes. Since it's windows, restart? ;-) Not jet, i just restarted Lyx a view times Then I'm almost out of ideas. I really thought it could be the z1 problem. It sounds like conversion problem, or that LyX can't copy files to temporary directory. Form me the path looks strange LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found First the leading dot, than /0 ... But i just noticed, the file myscript.pl is not converted to myscript.tex if i want to view a preview. When i start reading your how-to, i converted i manualy. Now i deleted this, but no new file is created. Anyone else with a good idea? -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: [WIN] Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: Just to be sure, check all the highlight commands that you entered into the LyX preferences. It really sounds like a problem with the temporary copies. For the converters, both plain and pdflatex, i enterd: c:\programme\highlight\highlight.exe -A -L -t 4 -I -S pl -f -r -q $$i -o $$o is there any way to reload miktex configuration? Perhaps the z0 change is not active yet? Yes, Windows reboot. But nothing changed. -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: http://www.taljaren.se/MinLyXTutorial.html (same as pdf) http://www.taljaren.se/MinLyXTutorial.pdf This is great, do you know how to do on Windows? I did everything as you described (with Perl insted of C++), but if i want to see a dvi preview i get folowing error: LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found ...d__daten_prog_perl_myscript.tex} } ***(cannot \read drom terminal in nonstop modes) -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
[WIN] Embedding highlighed external source code files in a LyX document
I modifierd the subject, because i think tracing will be easyer.
Gunnar Lindholm schrieb:
But the hightlight program works fine?
Yes
I did everything as you described (with Perl insted of C++), but if i
want to see a dvi preview i get folowing error:
LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found
...d__daten_prog_perl_myscript.tex}
}
***(cannot \read drom terminal in nonstop modes)
Can you view postscript or pdf?
No both generate the same error, like above.
Can you export from command line lyx -e pdf mein_buch.lyx?
No, i get:
Error: File could not be exportet
There are no information how to export the format pdf
This is my traslation
Do you have any problem with including other external material?
Yes it seen so:
...raphics{0d__daten_realplayer_registration}
I could not locate the file with any of these extensions:
.eps,.ps,.eps.gz,.ps.gz,.eps.Z
Try typing return to proceed.
If that doesn't work, type X return to quit.
I'm not sure, but I don't wan't to write-off the problem with the file
/etc/texmf/dvips/config/config.ps (in linux system, but I think you have a
similar?)
Yes, on my system it's located in C:\Programme\MiKTeX 2.5\dvips\config
If it says z1 in your file, change to z0. I had similar problems until I
changed it to z0.
Does that help?
Noop, nothing changes.
Yours
Roland
Re: [WIN] Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: LyX version 1.4.4 ? I've only tried it with 1.4.* versions. I use 1.4.3-4 Noop, nothing changes. Since it's windows, restart? ;-) Not jet, i just restarted Lyx a view times Then I'm almost out of ideas. I really thought it could be the z1 problem. It sounds like conversion problem, or that LyX can't copy files to temporary directory. Form me the path looks strange LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found First the leading dot, than /0 ... But i just noticed, the file myscript.pl is not converted to myscript.tex if i want to view a preview. When i start reading your how-to, i converted i manualy. Now i deleted this, but no new file is created. Anyone else with a good idea? -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: [WIN] Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: Just to be sure, check all the highlight commands that you entered into the LyX preferences. It really sounds like a problem with the temporary copies. For the converters, both plain and pdflatex, i enterd: c:\programme\highlight\highlight.exe -A -L -t 4 -I -S pl -f -r -q $$i -o $$o is there any way to reload miktex configuration? Perhaps the z0 change is not active yet? Yes, Windows reboot. But nothing changed. -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: > http://www.taljaren.se/MinLyXTutorial.html > (same as pdf) http://www.taljaren.se/MinLyXTutorial.pdf This is great, do you know how to do on Windows? I did everything as you described (with Perl insted of C++), but if i want to see a dvi preview i get folowing error: LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found ...d__daten_prog_perl_myscript.tex} } ***(cannot \read drom terminal in nonstop modes) -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
[WIN] Embedding highlighed external source code files in a LyX document
I modifierd the subject, because i think tracing will be easyer.
Gunnar Lindholm schrieb:
> But the hightlight program works fine?
Yes
>> I did everything as you described (with Perl insted of C++), but if i
>> want to see a dvi preview i get folowing error:
>> LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found
>> ...d__daten_prog_perl_myscript.tex}
>> }
>> ***(cannot \read drom terminal in nonstop modes)
> Can you view postscript or pdf?
No both generate the same error, like above.
> Can you export from command line "lyx -e pdf mein_buch.lyx"?
No, i get:
Error: File could not be exportet
There are no information how to export the format pdf
This is my traslation
> Do you have any problem with including other external material?
Yes it seen so:
...raphics{0d__daten_realplayer_registration}
I could not locate the file with any of these extensions:
.eps,.ps,.eps.gz,.ps.gz,.eps.Z
Try typingto proceed.
If that doesn't work, type X to quit.
> I'm not sure, but I don't wan't to write-off the problem with the file
> /etc/texmf/dvips/config/config.ps (in linux system, but I think you have a
> similar?)
Yes, on my system it's located in C:\Programme\MiKTeX 2.5\dvips\config
> If it says z1 in your file, change to z0. I had similar problems until I
> changed it to z0.
> Does that help?
Noop, nothing changes.
Yours
Roland
Re: [WIN] Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: > LyX version 1.4.4 ? I've only tried it with 1.4.* versions. I use 1.4.3-4 >> Noop, nothing changes. > Since it's windows, restart? ;-) Not jet, i just restarted Lyx a view times > Then I'm almost out of ideas. I really thought it could be the z1 problem. > It sounds like conversion problem, or that LyX can't copy files to temporary > directory. Form me the path looks strange "LaTex Error: File './0d__daten_prog_perl_myscript.tex' not found" First the leading dot, than "/0" ... But i just noticed, the file myscript.pl is not converted to myscript.tex if i want to view a preview. When i start reading your how-to, i converted i manualy. Now i deleted this, but no new file is created. > Anyone else with a good idea? -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: [WIN] Embedding highlighed external source code files in a LyX document
Gunnar Lindholm schrieb: > Just to be sure, check all the highlight commands that you entered into the > LyX preferences. > It really sounds like a problem with the temporary copies. For the converters, both plain and pdflatex, i enterd: "c:\programme\highlight\highlight.exe -A -L -t 4 -I -S pl -f -r -q $$i -o $$o" > is there any way to "reload miktex configuration"? Perhaps the z0 change is > not active yet? Yes, Windows reboot. But nothing changed. -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
fancyfoot problem
Hi Lyx'ers for my master thesis i want to use the title of the thesis an my name as fancyfoot. My name on the right hand side, the thesis title on the left hand side. The title itselve is to long for one line. At the moment the titel is writen over my name. How can i insert a linebraek in the title, ore what else can i do to prevent my name from beeing overwriten by the title? -- Mit freundlichem GrussYours sincerely Roland Schmitz
Re: fancyfoot problem - solved
Am Sonntag, 18. März 2007 18:53 schrieb Steve Litt: The \\ commands are newline commands. Bingo, that's the thing i was looking for. Thanx Roland Schmitz
Index Entry
Hi,
now i've got a problem with index entrys,
I've got a Chapter about neuronal networks, there is the word Layer which
i want to be indexd. But i dont want Layer ... 5.
I have a strukture in my index, with a let me say a major entry,
here Neuronal network with sub entry's like layer. I hope somebody
understands what i want, it l should like:
Layer - see Neuronal Network, Layer
...
Neuronal Network 5
Layer6
I tryed following Layer|see{Neuronales Netz!Schicht} but Layer alone did not
appear in my index (with the reference to Neuronal Netowork-layer). How can i
fix this?
--
Mit freundlichem GrussYours sincerely
Roland Schmitz
fancyfoot problem
Hi Lyx'ers for my master thesis i want to use the title of the thesis an my name as fancyfoot. My name on the right hand side, the thesis title on the left hand side. The title itselve is to long for one line. At the moment the titel is writen over my name. How can i insert a linebraek in the title, ore what else can i do to prevent my name from beeing overwriten by the title? -- Mit freundlichem GrussYours sincerely Roland Schmitz
Re: fancyfoot problem - solved
Am Sonntag, 18. März 2007 18:53 schrieb Steve Litt: The \\ commands are newline commands. Bingo, that's the thing i was looking for. Thanx Roland Schmitz
Index Entry
Hi,
now i've got a problem with index entrys,
I've got a Chapter about neuronal networks, there is the word Layer which
i want to be indexd. But i dont want Layer ... 5.
I have a strukture in my index, with a let me say a major entry,
here Neuronal network with sub entry's like layer. I hope somebody
understands what i want, it l should like:
Layer - see Neuronal Network, Layer
...
Neuronal Network 5
Layer6
I tryed following Layer|see{Neuronales Netz!Schicht} but Layer alone did not
appear in my index (with the reference to Neuronal Netowork-layer). How can i
fix this?
--
Mit freundlichem GrussYours sincerely
Roland Schmitz
fancyfoot problem
Hi Lyx'ers for my master thesis i want to use the title of the thesis an my name as fancyfoot. My name on the right hand side, the thesis title on the left hand side. The title itselve is to long for one line. At the moment the titel is writen over my name. How can i insert a linebraek in the title, ore what else can i do to prevent my name from beeing "overwriten" by the title? -- Mit freundlichem GrussYours sincerely Roland Schmitz
Re: fancyfoot problem - solved
Am Sonntag, 18. März 2007 18:53 schrieb Steve Litt: > The \\ commands are newline commands. Bingo, that's the thing i was looking for. Thanx Roland Schmitz
Index Entry
Hi,
now i've got a problem with index entrys,
I've got a Chapter about "neuronal networks", there is the word "Layer" which
i want to be indexd. But i dont want "Layer ... 5".
I have a strukture in my index, with a let me say a "major" entry,
here "Neuronal network" with sub entry's like "layer". I hope somebody
understands what i want, it l should like:
Layer -> see Neuronal Network, Layer
...
Neuronal Network 5
Layer6
I tryed following "Layer|see{Neuronales Netz!Schicht}" but Layer alone did not
appear in my index (with the reference to Neuronal Netowork-layer). How can i
fix this?
--
Mit freundlichem GrussYours sincerely
Roland Schmitz
Re: degree symbol in lyx on ubuntu with the Compose key
Hi John, when i'm looking for Symbols, i use http://www.ctan.org/tex-archive/info/symbols/comprehensive/symbols-a4.pdf Here you ca find almost everything ;-} -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: degree symbol in lyx on ubuntu with the Compose key
Hi John, when i'm looking for Symbols, i use http://www.ctan.org/tex-archive/info/symbols/comprehensive/symbols-a4.pdf Here you ca find almost everything ;-} -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: degree symbol in lyx on ubuntu with the Compose key
Hi John, when i'm looking for Symbols, i use http://www.ctan.org/tex-archive/info/symbols/comprehensive/symbols-a4.pdf Here you ca find "almost everything" ;-} -- Mit freundlichen Gruessen Yours Sincerely Roland Schmitz
Re: Ho to write my own paragraph layout or how to change
Hi Steve, On Friday 2. Februar 2007 22:02, Steve Litt wrote: I've written some content on the subject of making your own environments in a layout file. Start here: http://www.troubleshooters.com/linux/lyx/index.htm There are some broken Links on your Page, e. g. 404 Not Found The requested URL /linux/lyx/self_publish_lyx.htm does not exist. -- Mit freundlichem GrussYours sincerely Roland Schmitz
Re: Ho to write my own paragraph layout or how to change
Hi Steve, On Friday 2. Februar 2007 22:02, Steve Litt wrote: I've written some content on the subject of making your own environments in a layout file. Start here: http://www.troubleshooters.com/linux/lyx/index.htm There are some broken Links on your Page, e. g. 404 Not Found The requested URL /linux/lyx/self_publish_lyx.htm does not exist. -- Mit freundlichem GrussYours sincerely Roland Schmitz
Re: Ho to write my own paragraph layout or how to change
Hi Steve, On Friday 2. Februar 2007 22:02, Steve Litt wrote: >I've written some content on the subject of making your own >environments in a layout file. Start here: > >http://www.troubleshooters.com/linux/lyx/index.htm There are some broken Links on your Page, e. g. 404 Not Found The requested URL /linux/lyx/self_publish_lyx.htm does not exist. -- Mit freundlichem GrussYours sincerely Roland Schmitz
Re: Ho to write my own paragraph layout or how to change LyX-Code
Hi Richard, Hi Steve, thanx for your quick answer. Now i know where to read about writing my own environment. Because i'm new to LaTeX, i think i'll need some support after reading, testing, ... I'll be back ;-} Roland Schmitz
Re: Ho to write my own paragraph layout or how to change LyX-Code
Hi Richard, Hi Steve, thanx for your quick answer. Now i know where to read about writing my own environment. Because i'm new to LaTeX, i think i'll need some support after reading, testing, ... I'll be back ;-} Roland Schmitz
Re: Ho to write my own paragraph layout or how to change "LyX-Code"
Hi Richard, Hi Steve, thanx for your quick answer. Now i know where to read about writing my own environment. Because i'm new to LaTeX, i think i'll need some support after reading, testing, ... I'll be back ;-} Roland Schmitz
Ho to write my own paragraph layout or how to change LyX-Code
Hi List, i'm looking for an code layout (environment) for LyX, wich automaticly inserts line numbers and a table of contents for all listings. If it's possible to configure this layout to look a bit like old endless paper (one line with white background, one with green) this would be exactly what i'm looking for, but that would be a goody. If there is a tutorial how to write layouts, a RTFM with a link will be enough. I knwo i can use the LaTeX listing package, but ERT's are not really comfortable. -- Mit freundlichem GrussYours sincerely Roland Schmitz
Ho to write my own paragraph layout or how to change LyX-Code
Hi List, i'm looking for an code layout (environment) for LyX, wich automaticly inserts line numbers and a table of contents for all listings. If it's possible to configure this layout to look a bit like old endless paper (one line with white background, one with green) this would be exactly what i'm looking for, but that would be a goody. If there is a tutorial how to write layouts, a RTFM with a link will be enough. I knwo i can use the LaTeX listing package, but ERT's are not really comfortable. -- Mit freundlichem GrussYours sincerely Roland Schmitz
Ho to write my own paragraph layout or how to change "LyX-Code"
Hi List, i'm looking for an code layout (environment) for LyX, wich automaticly inserts line numbers and a "table of contents" for all listings. If it's possible to configure this layout to look a bit like old "endless paper" (one line with white background, one with green) this would be exactly what i'm looking for, but that would be a goody. If there is a tutorial how to write layouts, a RTFM with a link will be enough. I knwo i can use the LaTeX "listing package", but ERT's are not really comfortable. -- Mit freundlichem GrussYours sincerely Roland Schmitz
Re: How I can get help with Index Entry?
Hi Marcelo mark the whole String, e.g. Arsenio Ferraces Rodríguez, and then select Insert Index Entry. On my system i do a Ctrl+C (copy of the string) first, because the marked string is replaced with the index entry mark. After that i do a Ctrl+V (paste). Yours Roland
Re: How I can get help with Index Entry?
Hi Marcelo mark the whole String, e.g. Arsenio Ferraces Rodríguez, and then select Insert Index Entry. On my system i do a Ctrl+C (copy of the string) first, because the marked string is replaced with the index entry mark. After that i do a Ctrl+V (paste). Yours Roland
Re: How I can get help with Index Entry?
Hi Marcelo mark the whole String, e.g. Arsenio Ferraces Rodríguez, and then select Insert > Index Entry. On my system i do a "Ctrl+C" (copy of the string) first, because the marked string is replaced with the index entry "mark". After that i do a "Ctrl+V" (paste). Yours Roland
Lines longer than page width
Hi, i just noticed that some long lines (paragraphs) wich uses the LyX-Code style didn't break at when they are longer than the page width. This dont looks very nice. Also if i got cross-references or references to my bibliography in a paragraph, the lines are often (not always) longer than the page width. If a reference is the last word in a line, it isn't splitt up at the end of the line. Is there a way to change this? -- Thanx Roland
Re: Lines longer than page width
Hi Jürgen, hi List, I guess you have to insert manual line breaks (or use listings.sty instead of lyxcode, for that matter). How to use this? Cf. http://www.tex.ac.uk/cgi-bin/texfaq2html?label=overfull That's it -- Thanx Roland
Lines longer than page width
Hi, i just noticed that some long lines (paragraphs) wich uses the LyX-Code style didn't break at when they are longer than the page width. This dont looks very nice. Also if i got cross-references or references to my bibliography in a paragraph, the lines are often (not always) longer than the page width. If a reference is the last word in a line, it isn't splitt up at the end of the line. Is there a way to change this? -- Thanx Roland
Re: Lines longer than page width
Hi Jürgen, hi List, I guess you have to insert manual line breaks (or use listings.sty instead of lyxcode, for that matter). How to use this? Cf. http://www.tex.ac.uk/cgi-bin/texfaq2html?label=overfull That's it -- Thanx Roland
Lines longer than page width
Hi, i just noticed that some long lines (paragraphs) wich uses the "LyX-Code" style didn't break at when they are longer than the page width. This dont looks very nice. Also if i got cross-references or references to my bibliography in a paragraph, the lines are often (not always) longer than the page width. If a reference is the last word in a line, it isn't splitt up at the end of the line. Is there a way to change this? -- Thanx Roland
Re: Lines longer than page width
Hi Jürgen, hi List, > I guess you have to insert manual line breaks (or use listings.sty instead > of lyxcode, for that matter). How to use this? > Cf. > http://www.tex.ac.uk/cgi-bin/texfaq2html?label=overfull That's it -- Thanx Roland
Problems with hyperref (and longtable?)
Hi,
i've got a problem with hperref in my Master Thesis.
If i generate a dvi or pdf an click on a link for exmple chapter 2, the second
chapter in the apendix will be shown to me. If i cklick to on chapter 4 the
fourth chapter in the apendix is shown, and so on ...
I'm not shure since when first i thougt it happend after i inserted a
longtable, but i removed the longtable stuff, the problem is the same.
I started my apendix in a ERT like this:
\setcounter{chapter}{0}
\renewcommand{\thechapter}{\Alph{chapter}}
\clearpage
%\appendix
\addcontentsline{toc}{part}{Anhang}
\thispagestyle{empty}
If i uncomment \appendix i got several errors.
--
Thanx
Roland
Problems with hyperref (and longtable?)
Hi,
i've got a problem with hperref in my Master Thesis.
If i generate a dvi or pdf an click on a link for exmple chapter 2, the second
chapter in the apendix will be shown to me. If i cklick to on chapter 4 the
fourth chapter in the apendix is shown, and so on ...
I'm not shure since when first i thougt it happend after i inserted a
longtable, but i removed the longtable stuff, the problem is the same.
I started my apendix in a ERT like this:
\setcounter{chapter}{0}
\renewcommand{\thechapter}{\Alph{chapter}}
\clearpage
%\appendix
\addcontentsline{toc}{part}{Anhang}
\thispagestyle{empty}
If i uncomment \appendix i got several errors.
--
Thanx
Roland
Problems with hyperref (and longtable?)
Hi,
i've got a problem with hperref in my Master Thesis.
If i generate a dvi or pdf an click on a link for exmple chapter 2, the second
chapter in the apendix will be shown to me. If i cklick to on chapter 4 the
fourth chapter in the apendix is shown, and so on ...
I'm not shure since when first i thougt it happend after i inserted a
longtable, but i removed the longtable stuff, the problem is the same.
I started my apendix in a ERT like this:
\setcounter{chapter}{0}
\renewcommand{\thechapter}{\Alph{chapter}}
\clearpage
%\appendix
\addcontentsline{toc}{part}{Anhang}
\thispagestyle{empty}
If i uncomment \appendix i got several errors.
--
Thanx
Roland
Index entry XYZ see ABC
Hi, I'm looking for a way to have index entrys like Status LEDsee LED. How can I create such index entrys? Thanx Roland Schmitz -- Mit freundlichem GrussYours sincerely Roland Schmitz Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail
Index entry XYZ see ABC
Hi, I'm looking for a way to have index entrys like Status LEDsee LED. How can I create such index entrys? Thanx Roland Schmitz -- Mit freundlichem GrussYours sincerely Roland Schmitz Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail
Index entry "XYZ see ABC"
Hi, I'm looking for a way to have index entrys like "Status LEDsee LED". How can I create such index entrys? Thanx Roland Schmitz -- Mit freundlichem GrussYours sincerely Roland Schmitz Lassen Sie Ihren Gedanken freien Lauf... z.B. per FreeSMS GMX bietet bis zu 100 FreeSMS/Monat: http://www.gmx.net/de/go/mail
Minitoc
Hi,
today i tried to use minitoc inside my Master Thesis, without success.
I did following:
-insert \usepackage{minitoc} in the preamble
-insert \dominitoc at the beginning of the document in a ERT
-insert \minitoc after each chapter in a ERT
The result is, after each chapter i've got a heading Inhaltsangabe and two
horizontal lines, that's it. But there's no minitoc between this lines.
Waht's wrong/missing?
--
Thanx
Roland
Minitoc
Hi,
today i tried to use minitoc inside my Master Thesis, without success.
I did following:
-insert \usepackage{minitoc} in the preamble
-insert \dominitoc at the beginning of the document in a ERT
-insert \minitoc after each chapter in a ERT
The result is, after each chapter i've got a heading Inhaltsangabe and two
horizontal lines, that's it. But there's no minitoc between this lines.
Waht's wrong/missing?
--
Thanx
Roland
Minitoc
Hi,
today i tried to use minitoc inside my Master Thesis, without success.
I did following:
-insert "\usepackage{minitoc}" in the preamble
-insert "\dominitoc" at the beginning of the document in a ERT
-insert "\minitoc" after each chapter in a ERT
The result is, after each chapter i've got a heading "Inhaltsangabe" and two
horizontal lines, that's it. But there's no minitoc between this lines.
Waht's wrong/missing?
--
Thanx
Roland
Re: Lyx Longtable
Hi, Am Freitag, 28. Januar 2005 00:38 schrieben Sie: You might also have a look at the file TableExamples.lyx that is part of your LyX installatuion. thanx that's what i was looking for. Now i knwo how to insert a longtable, but while using them without a table float, i dont know how to get a entry in my list of tables, just write the name behind the table, with caption format didn't work -- Thanx Roland
Re: Lyx Longtable
Hi, Am Freitag, 28. Januar 2005 00:38 schrieben Sie: You might also have a look at the file TableExamples.lyx that is part of your LyX installatuion. thanx that's what i was looking for. Now i knwo how to insert a longtable, but while using them without a table float, i dont know how to get a entry in my list of tables, just write the name behind the table, with caption format didn't work -- Thanx Roland
Re: Lyx Longtable
Hi, Am Freitag, 28. Januar 2005 00:38 schrieben Sie: > You might also have a look at the file > > TableExamples.lyx > > that is part of your LyX installatuion. > thanx that's what i was looking for. Now i knwo how to insert a longtable, but while using them without a table float, i dont know how to get a entry in my list of tables, just write the name behind the table, with caption format didn't work -- Thanx Roland
Re: PNG files
Hi John, This shows up in the LyX file but with an error message, as attached. For me this sounds, like your file isn't lokatet where Lyx is looking for it. I am then unable to update the dvi or export to a pdf with pdfLaTeX. I checked your file without problems. Ok i had to change the file location, but that's it. -- Thanx Roland
Re: PNG files
Hi John, This shows up in the LyX file but with an error message, as attached. For me this sounds, like your file isn't lokatet where Lyx is looking for it. I am then unable to update the dvi or export to a pdf with pdfLaTeX. I checked your file without problems. Ok i had to change the file location, but that's it. -- Thanx Roland
Re: PNG files
Hi John, > This shows up in the LyX file but with an error message, as attached. For me this sounds, like your file isn't lokatet where Lyx is looking for it. > I am then unable to update the dvi or export to a pdf with pdfLaTeX. I checked your file without problems. Ok i had to change the file location, but that's it. -- Thanx Roland
Re: Lyx and CVS
Hi Kayvan,
Put the following in your LaTeX preamble:
% RCS style.
\def\RCSdef $#1${\typeout{RCS keyword string: [EMAIL PROTECTED]: {} :.}
[EMAIL PROTECTED]: #2 :#3.{\expandafter\def\csname RCS#1\endcsname{#2}}
Then, in your document (or in your preamble), do:
\RCSdef $Revision$
\RCSdef $Date$
Now, you can use \RCSRevision or \RCSDate in your document (in a
LaTeX ERT inset).
can i use this code similar with CVS?
Roland
--
Mit freundlichem GrussYours sincerely
Roland Schmitz
Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD
Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Todd, hi list, https://www.cvshome.org/docs/manual/cvs-1.11.17/cvs_12.html#SEC97 CVS uses rcs (actually has it built in now) as its underlying system, so all the RCS key words work as listed. It is CVS that I use, and when I tested Kayvan's advice against my repository, I found it working beautifully. great, i'll use it this weekend. Thanx Roland -- Mit freundlichem GrussYours sincerely Roland Schmitz Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Kayvan,
Put the following in your LaTeX preamble:
% RCS style.
\def\RCSdef $#1${\typeout{RCS keyword string: [EMAIL PROTECTED]: {} :.}
[EMAIL PROTECTED]: #2 :#3.{\expandafter\def\csname RCS#1\endcsname{#2}}
Then, in your document (or in your preamble), do:
\RCSdef $Revision$
\RCSdef $Date$
Now, you can use \RCSRevision or \RCSDate in your document (in a
LaTeX ERT inset).
can i use this code similar with CVS?
Roland
--
Mit freundlichem GrussYours sincerely
Roland Schmitz
Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD
Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Todd, hi list, https://www.cvshome.org/docs/manual/cvs-1.11.17/cvs_12.html#SEC97 CVS uses rcs (actually has it built in now) as its underlying system, so all the RCS key words work as listed. It is CVS that I use, and when I tested Kayvan's advice against my repository, I found it working beautifully. great, i'll use it this weekend. Thanx Roland -- Mit freundlichem GrussYours sincerely Roland Schmitz Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Kayvan,
> Put the following in your LaTeX preamble:
> % RCS style.
> \def\RCSdef $#1${\typeout{RCS keyword string: [EMAIL PROTECTED]: {} :.}
> [EMAIL PROTECTED]: #2 :#3.{\expandafter\def\csname RCS#1\endcsname{#2}}
>
> Then, in your document (or in your preamble), do:
> \RCSdef $Revision$
> \RCSdef $Date$
>
> Now, you can use \RCSRevision or \RCSDate in your document (in a
> LaTeX ERT inset).
can i use this code similar with CVS?
Roland
--
Mit freundlichem GrussYours sincerely
Roland Schmitz
Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD
Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Todd, hi list, > https://www.cvshome.org/docs/manual/cvs-1.11.17/cvs_12.html#SEC97 > CVS uses rcs (actually has it built in now) as its underlying system, so > all > the RCS key words work as listed. > It is CVS that I use, and when I tested Kayvan's advice against my > repository, > I found it working beautifully. great, i'll use it this weekend. Thanx Roland -- Mit freundlichem Gruss Yours sincerely Roland Schmitz Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Alexis, I embed Subversion keywords in my LyX documents (e.g. '$HeadURL$ $LastChangedRevision$') and this works fine. You can use the RCS keywords, which CVS uses to do the same thing. Try putting '$Revision$' in your document. Look at RCS's co(1) man page for a list of keywords. This sounds quite simple, before i started this thread, i googled the web with linux lyx cvs and found countless pages which doesn't help me. Is there any source to read for me? Until this weekend, i can't check it it, but i can read about it, if i know where. Thanx Roland -- Mit freundlichem GrussYours sincerely Roland Schmitz Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Alexis, I embed Subversion keywords in my LyX documents (e.g. '$HeadURL$ $LastChangedRevision$') and this works fine. You can use the RCS keywords, which CVS uses to do the same thing. Try putting '$Revision$' in your document. Look at RCS's co(1) man page for a list of keywords. This sounds quite simple, before i started this thread, i googled the web with linux lyx cvs and found countless pages which doesn't help me. Is there any source to read for me? Until this weekend, i can't check it it, but i can read about it, if i know where. Thanx Roland -- Mit freundlichem GrussYours sincerely Roland Schmitz Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Re: Lyx and CVS
Hi Alexis, > I embed Subversion keywords in my LyX documents (e.g. '$HeadURL$ > $LastChangedRevision$') and this works fine. You can use the RCS > keywords, which CVS uses to do the same thing. Try putting '$Revision$' > in your document. Look at RCS's co(1) man page for a list of > keywords. This sounds quite simple, before i started this thread, i googled the web with "linux lyx cvs" and found countless pages which doesn't help me. Is there any source to read for me? Until this weekend, i can't check it it, but i can read about it, if i know where. Thanx Roland -- Mit freundlichem GrussYours sincerely Roland Schmitz Geschenkt: 3 Monate GMX ProMail + 3 Ausgaben der TV Movie mit DVD Jetzt anmelden und testen http://www.gmx.net/de/go/mail
Lyx and CVS
Hi, while writing my master thesis, i started to use cvs to track changes in the text, pictures, measuremet results ... . Inside of my thesis i want to use the cvs version or revision tags (on the titlepage, or in the page headings/footer). Is/how it possibe to query cvs automaticly before printing the thesis, which number/tag is actual used in cvs, and insert this result into the text before printing starts? -- Thanx Roland P.S. I'll be probably offline till friday.
Lyx and CVS
Hi, while writing my master thesis, i started to use cvs to track changes in the text, pictures, measuremet results ... . Inside of my thesis i want to use the cvs version or revision tags (on the titlepage, or in the page headings/footer). Is/how it possibe to query cvs automaticly before printing the thesis, which number/tag is actual used in cvs, and insert this result into the text before printing starts? -- Thanx Roland P.S. I'll be probably offline till friday.
Lyx and CVS
Hi, while writing my master thesis, i started to use cvs to track changes in the text, pictures, measuremet results ... . Inside of my thesis i want to use the cvs version or revision tags (on the titlepage, or in the page headings/footer). Is/how it possibe to query cvs automaticly before printing the thesis, which number/tag is actual used in cvs, and insert this result into the text before printing starts? -- Thanx Roland P.S. I'll be probably offline till friday.
Watermark
Hi,
i've got some questions on watermarks. At
http://www.texnik.de/titlepage/background.phtml i found the folowing fine
working code. My Questions:
1) How can i use (this) text watermark on every page, without the first
(title) page?
2) How can i reduce the text size? I changed /mx (\the\textwidth) split 2 div
72 add def to /mx (\the\textwidth) split 2 div 48 add def, /my dito
without sucsess.
3) Is it possible to use a linebreak in my text?
4)Why did'nt i see the watermark in the dvi preview?
\AtBeginDocument{\special{!userdict begin
/split {(pt) search { 3 1 roll pop pop } if cvr} def
%%% Definitions %%
/font /Palatino-Roman findfont 110 scalefont def
/grayvalue .8 def % 1 is white
/angle 50 def % rotation for the text
/bgtext (Erstellt von Roland Schmitz) def % background text
%%
gsave font setfont 1000 1000 moveto
bgtext true charpath pathbbox grestore
3 -1 roll sub 3 1 roll sub neg
/breite exch def /hoehe exch def
/mx (\the\textwidth) split 2 div 72 add def
/my (\the\textheight) split 2 div 72 add def
/bop-hook { gsave grayvalue setgray font setfont
mx my translate angle rotate
breite -2 div hoehe -2 div moveto
bgtext show grestore
} def end
}}
%% Wasserzeichentext -Ende-
--
Thanx
Roland
Watermark
Hi,
i've got some questions on watermarks. At
http://www.texnik.de/titlepage/background.phtml i found the folowing fine
working code. My Questions:
1) How can i use (this) text watermark on every page, without the first
(title) page?
2) How can i reduce the text size? I changed /mx (\the\textwidth) split 2 div
72 add def to /mx (\the\textwidth) split 2 div 48 add def, /my dito
without sucsess.
3) Is it possible to use a linebreak in my text?
4)Why did'nt i see the watermark in the dvi preview?
\AtBeginDocument{\special{!userdict begin
/split {(pt) search { 3 1 roll pop pop } if cvr} def
%%% Definitions %%
/font /Palatino-Roman findfont 110 scalefont def
/grayvalue .8 def % 1 is white
/angle 50 def % rotation for the text
/bgtext (Erstellt von Roland Schmitz) def % background text
%%
gsave font setfont 1000 1000 moveto
bgtext true charpath pathbbox grestore
3 -1 roll sub 3 1 roll sub neg
/breite exch def /hoehe exch def
/mx (\the\textwidth) split 2 div 72 add def
/my (\the\textheight) split 2 div 72 add def
/bop-hook { gsave grayvalue setgray font setfont
mx my translate angle rotate
breite -2 div hoehe -2 div moveto
bgtext show grestore
} def end
}}
%% Wasserzeichentext -Ende-
--
Thanx
Roland
Watermark
Hi,
i've got some questions on watermarks. At
http://www.texnik.de/titlepage/background.phtml i found the folowing fine
working "code". My Questions:
1) How can i use (this) text watermark on every page, without the first
(title) page?
2) How can i reduce the text size? I changed "/mx (\the\textwidth) split 2 div
72 add def" to "/mx (\the\textwidth) split 2 div 48 add def", /my dito
without sucsess.
3) Is it possible to use a linebreak in my text?
4)Why did'nt i see the watermark in the dvi preview?
\AtBeginDocument{\special{!userdict begin
/split {(pt) search { 3 1 roll pop pop } if cvr} def
%%% Definitions %%
/font /Palatino-Roman findfont 110 scalefont def
/grayvalue .8 def % 1 is white
/angle 50 def % rotation for the text
/bgtext (Erstellt von Roland Schmitz) def % background text
%%
gsave font setfont 1000 1000 moveto
bgtext true charpath pathbbox grestore
3 -1 roll sub 3 1 roll sub neg
/breite exch def /hoehe exch def
/mx (\the\textwidth) split 2 div 72 add def
/my (\the\textheight) split 2 div 72 add def
/bop-hook { gsave grayvalue setgray font setfont
mx my translate angle rotate
breite -2 div hoehe -2 div moveto
bgtext show grestore
} def end
}}
%% Wasserzeichentext -Ende-
--
Thanx
Roland
Re: Inserting 1/2, 3/4, etc. characters
Hi, Am Montag, 20. September 2004 19:55 schrieb George Ellenburg: Can someone tell me how I can insert 1/2 as in 8 1/2 or 3/4 as in 7 3/4 into a LyX document? They're supposed to be actual characters to represent one-half and three-quarters, such as , , , , , etc. if you're looking for special characters, take a look at http://ftp.uni-koeln.de/tex/info/symbols/comprehensive/symbols-a4.pdf or http://ftp.uni-koeln.de/tex/info/symbols/comprehensive/symbols-letter.pdf -- Thanx Roland
Re: Inserting 1/2, 3/4, etc. characters
Hi, Am Montag, 20. September 2004 19:55 schrieb George Ellenburg: Can someone tell me how I can insert 1/2 as in 8 1/2 or 3/4 as in 7 3/4 into a LyX document? They're supposed to be actual characters to represent one-half and three-quarters, such as , , , , , etc. if you're looking for special characters, take a look at http://ftp.uni-koeln.de/tex/info/symbols/comprehensive/symbols-a4.pdf or http://ftp.uni-koeln.de/tex/info/symbols/comprehensive/symbols-letter.pdf -- Thanx Roland
Re: Inserting 1/2, 3/4, etc. characters
Hi, Am Montag, 20. September 2004 19:55 schrieb George Ellenburg: > Can someone tell me how I can insert "1/2" as in "8 1/2" or "3/4" as in > "7 3/4" into a LyX document? > > They're supposed to be actual characters to represent one-half and > three-quarters, such as Â, â, â, Â, Â, etc. if you're looking for special characters, take a look at http://ftp.uni-koeln.de/tex/info/symbols/comprehensive/symbols-a4.pdf or http://ftp.uni-koeln.de/tex/info/symbols/comprehensive/symbols-letter.pdf -- Thanx Roland
Re: Every second Page should be empty
Hi,
now i've checked it. No success :-{
If i print 4 pages on one sheet of paper, there are four pages full off text,
not just two with text and two without.
--
Thanx
Roland
Re: Every second Page should be empty
Hi,
now i've checked it. No success :-{
If i print 4 pages on one sheet of paper, there are four pages full off text,
not just two with text and two without.
--
Thanx
Roland
Re: Every second Page should be empty
Hi,
now i've checked it. No success :-{
If i print 4 pages on one sheet of paper, there are four pages full off text,
not just two with text and two without.
--
Thanx
Roland
Re: Every second Page should be empty
Hi, first of all thanx to you Herbert and Guenter, in a couple of houers i'll start a short trip, so there's no time to check this. I post the result next week. Your's Roland
Re: Every second Page should be empty
Hi, first of all thanx to you Herbert and Guenter, in a couple of houers i'll start a short trip, so there's no time to check this. I post the result next week. Your's Roland
Re: Every second Page should be empty
Hi, first of all thanx to you Herbert and Guenter, in a couple of houers i'll start a short trip, so there's no time to check this. I post the result next week. Your's Roland
Re: Every second Page should be empty
Am Dienstag, 7. September 2004 10:32 schrieb G. Milde: some suggestions: Take a block of empty pages with you to the laboratory, write your note on one and put it on the right place. Use a one sided printer, so the backside of your pages stays empty. That's the way i'm working today. Set the textwidth so that there is a large margin. Ok, i will check this. Downscale the ps-output (so the layout will be correct). Redefine the \pagebreak command to do 2 pagebreaks That sound's good. While i'm working on my thesis i print 4 pages to one sheet of paper. I think this could bee the way i'm looking for. I'm looking for the following layout: -top left corner the first side of my document -top right empty -buttom left the second side -button right empty How do i redefine the pagebreak to do a double pagebreak? -- Thanx Roland
Re: Every second Page should be empty
Am Dienstag, 7. September 2004 11:49 schrieb Roland Schmitz:
How do i redefine the pagebreak to do a double pagebreak?
Hi,
i tried first this:
\renewcommand{\pagebreak}{%
\pagebreak\pagebreak%
}
next try was:
\let\oldbreak=\pagebreak%
\renewcommand{\pagebreak}{%
\oldbreak%
\oldbreak%
}
without success. What's wrong?
--
Thanx
Roland
Re: Fontsize and savebox
Am Montag, 6. September 2004 21:52 schrieb Herbert Voss:
this cannot work, because the box is set as is ...
OK.
Write into the preamble
OK.
Because i'm a newbee, i need a bit more help
\let\OldMaketitle\maketitle
\renewcommand\maketitle{%
[EMAIL PROTECTED]
\OldMaketitle%
}
Where do i insert my titel of the document?
Now you can write in ERT
{\bfseries\huge\saveTitle}
OK
--
Thanx
Roland
Re: Every second Page should be empty
Am Dienstag, 7. September 2004 10:32 schrieb G. Milde: some suggestions: Take a block of empty pages with you to the laboratory, write your note on one and put it on the right place. Use a one sided printer, so the backside of your pages stays empty. That's the way i'm working today. Set the textwidth so that there is a large margin. Ok, i will check this. Downscale the ps-output (so the layout will be correct). Redefine the \pagebreak command to do 2 pagebreaks That sound's good. While i'm working on my thesis i print 4 pages to one sheet of paper. I think this could bee the way i'm looking for. I'm looking for the following layout: -top left corner the first side of my document -top right empty -buttom left the second side -button right empty How do i redefine the pagebreak to do a double pagebreak? -- Thanx Roland
Re: Every second Page should be empty
Am Dienstag, 7. September 2004 11:49 schrieb Roland Schmitz:
How do i redefine the pagebreak to do a double pagebreak?
Hi,
i tried first this:
\renewcommand{\pagebreak}{%
\pagebreak\pagebreak%
}
next try was:
\let\oldbreak=\pagebreak%
\renewcommand{\pagebreak}{%
\oldbreak%
\oldbreak%
}
without success. What's wrong?
--
Thanx
Roland
Re: Fontsize and savebox
Am Montag, 6. September 2004 21:52 schrieb Herbert Voss:
this cannot work, because the box is set as is ...
OK.
Write into the preamble
OK.
Because i'm a newbee, i need a bit more help
\let\OldMaketitle\maketitle
\renewcommand\maketitle{%
[EMAIL PROTECTED]
\OldMaketitle%
}
Where do i insert my titel of the document?
Now you can write in ERT
{\bfseries\huge\saveTitle}
OK
--
Thanx
Roland
Re: Every second Page should be empty
Am Dienstag, 7. September 2004 10:32 schrieb G. Milde: > some suggestions: > > Take a block of empty pages with you to the laboratory, write your note on > one and put it on the right place. > > Use a one sided printer, so the backside of your pages stays empty. That's the way i'm working today. > > Set the textwidth so that there is a large margin. Ok, i will check this. > > Downscale the ps-output (so the layout will be correct). > > Redefine the \pagebreak command to do 2 pagebreaks That sound's good. While i'm working on my thesis i print 4 pages to one sheet of paper. I think this could bee the way i'm looking for. I'm looking for the following "layout": -top left corner the first side of my document -top right empty -buttom left the second side -button right empty How do i redefine the pagebreak to do a double pagebreak? -- Thanx Roland
Re: Every second Page should be empty
Am Dienstag, 7. September 2004 11:49 schrieb Roland Schmitz:
> How do i redefine the pagebreak to do a double pagebreak?
Hi,
i tried first this:
\renewcommand{\pagebreak}{%
\pagebreak\pagebreak%
}
next try was:
\let\oldbreak=\pagebreak%
\renewcommand{\pagebreak}{%
\oldbreak%
\oldbreak%
}
without success. What's wrong?
--
Thanx
Roland
Re: Fontsize and savebox
Am Montag, 6. September 2004 21:52 schrieb Herbert Voss:
> this cannot work, because the box is set as is ...
OK.
> Write into the preamble
OK.
Because i'm a newbee, i need a bit more help
> \let\OldMaketitle\maketitle
> \renewcommand\maketitle{%
>[EMAIL PROTECTED]
>\OldMaketitle%
> }
Where do i insert my titel of the document?
>
> Now you can write in ERT
>
> {\bfseries\huge\saveTitle}
OK
--
Thanx
Roland
Restrict Table to the Pagewidth
Hi, how can i automaticly limit a table to be max. as wide as the Page. If the content in the colums need's more space, it should be a multi line colum(s). -- Thanx Roland
Every second Page should be empty
Hi, at the moment im writing my Master Thesis. While i'm working on it, it will be very helpfull for me, to have after ervery page which is allredy written, an empty on (which is not counted for the TOC). On this empty page i want to write some notes ... when im sitting at the university in the laboratory. -- Thanx Roland
Fontsize and savebox
Hi,
i want to use a savebox, to reuse the title of my document on different places
of my Document. Here's the defintion of th Savebox
\newsavebox{\DocTitle} \savebox{\DocTitle}{MyTitle}
Today i wanted to have the Title in an huge fontsize, so i tried:
{\bfseries\huge{\usebox{\DocTitle}}}
But this did not work. The Titel is set in normal size.
If i do
{\bfseries\huge X-{\usebox{\DocTitle}}-X}
X- and -X are huge, but MyTitle is set in normal size.
What's wrong, how can i change?
--
Thanx
Roland
Restrict Table to the Pagewidth
Hi, how can i automaticly limit a table to be max. as wide as the Page. If the content in the colums need's more space, it should be a multi line colum(s). -- Thanx Roland
Every second Page should be empty
Hi, at the moment im writing my Master Thesis. While i'm working on it, it will be very helpfull for me, to have after ervery page which is allredy written, an empty on (which is not counted for the TOC). On this empty page i want to write some notes ... when im sitting at the university in the laboratory. -- Thanx Roland
Fontsize and savebox
Hi,
i want to use a savebox, to reuse the title of my document on different places
of my Document. Here's the defintion of th Savebox
\newsavebox{\DocTitle} \savebox{\DocTitle}{MyTitle}
Today i wanted to have the Title in an huge fontsize, so i tried:
{\bfseries\huge{\usebox{\DocTitle}}}
But this did not work. The Titel is set in normal size.
If i do
{\bfseries\huge X-{\usebox{\DocTitle}}-X}
X- and -X are huge, but MyTitle is set in normal size.
What's wrong, how can i change?
--
Thanx
Roland
Restrict Table to the Pagewidth
Hi, how can i automaticly limit a table to be max. as wide as the Page. If the content in the colums need's more space, it should be a "multi line" colum(s). -- Thanx Roland
Every second Page should be empty
Hi, at the moment im writing my Master Thesis. While i'm working on it, it will be very helpfull for me, to have after ervery page which is allredy written, an empty on (which is not counted for the TOC). On this empty page i want to write some notes ... when im sitting at the university in the laboratory. -- Thanx Roland
Fontsize and savebox
Hi,
i want to use a savebox, to reuse the title of my document on different places
of my Document. Here's the defintion of th Savebox
\newsavebox{\DocTitle} \savebox{\DocTitle}{MyTitle}
Today i wanted to have the Title in an "huge" fontsize, so i tried:
{\bfseries\huge{\usebox{\DocTitle}}}
But this did not work. The Titel is set in normal size.
If i do
{\bfseries\huge X->{\usebox{\DocTitle}}<-X}
X-> and <-X are huge, but "MyTitle" is set in normal size.
What's wrong, how can i change?
--
Thanx
Roland
Document Titel in fancyfoot
Hi,
how can i use the titel of my document, which is defined in:
\title{Titel of my Masterthesis}
to have this in my fancyfoot environment. At the Moment i have to type the
Titel again:
\fancyfoot[OL]{Titel of my Masterthesis}
--
Thanx
Roland
