lyxpipe problem
Hi list, I'm pretty much a linux and lyx newbie. I have a problem with the lyxpipe. I want to get JabRef to communicate with lyx so that JabRef can insert bibliographical information into lyx-documents. After I read how to get the lyxserver pipe running (I'm not sure if I completely misunderstood that advice: insert a line into the file lyxrc.default like this: \lyxserver /home/s.chicken/.lyxpipe) I inserted that line into lyxrc. But nothing happend. Lyx didn't create the files lyxpipe.in and lyxpipe.out. So I get an error message in JabRef saying that either lyx is not working or the serverpipe isn't configured properly. Is there anything I can do to get the serverpipe runnig properly? I use LYX 1.3.4 on Suse 9.1 and JabRef 1.4 Thank you in advance! Kai (Please excuse my poor english for that I'm not a native speaker) ___ Join Excite! - http://www.excite.com The most personalized portal on the Web!
[s.chicken@excite.com: lyxpipe problem]
Please reply to the reply-to: below. Mate - Forwarded message from n/a [EMAIL PROTECTED] - Delivered-To: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: lyxpipe problem X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: ID = d4113387333551f97a0df1c851c3d34a Reply-To: [EMAIL PROTECTED] From: n/a [EMAIL PROTECTED] X-Sender: [EMAIL PROTECTED] X-Mailer: PHP Date: Sun, 20 Jun 2004 05:32:25 -0400 (EDT) Hi list, I'm pretty much a linux and lyx newbie. I have a problem with the lyxpipe. I want to get JabRef to communicate with lyx so that JabRef can insert bibliographical information into lyx-documents. After I read how to get the lyxserver pipe running (I'm not sure if I completely misunderstood that advice: insert a line into the file lyxrc.default like this: \lyxserver /home/s.chicken/.lyxpipe) I inserted that line into lyxrc. But nothing happend. Lyx didn't create the files lyxpipe.in and lyxpipe.out. So I get an error message in JabRef saying that either lyx is not working or the serverpipe isn't configured properly. Is there anything I can do to get the serverpipe runnig properly? I use LYX 1.3.4 on Suse 9.1 and JabRef 1.4 Thank you in advance! Kai (Please excuse my poor english for that I'm not a native speaker) ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! - End forwarded message -
lyxpipe problem
Hi list, I'm pretty much a linux and lyx newbie. I have a problem with the lyxpipe. I want to get JabRef to communicate with lyx so that JabRef can insert bibliographical information into lyx-documents. After I read how to get the lyxserver pipe running (I'm not sure if I completely misunderstood that advice: insert a line into the file lyxrc.default like this: \lyxserver /home/s.chicken/.lyxpipe) I inserted that line into lyxrc. But nothing happend. Lyx didn't create the files lyxpipe.in and lyxpipe.out. So I get an error message in JabRef saying that either lyx is not working or the serverpipe isn't configured properly. Is there anything I can do to get the serverpipe runnig properly? I use LYX 1.3.4 on Suse 9.1 and JabRef 1.4 Thank you in advance! Kai (Please excuse my poor english for that I'm not a native speaker) ___ Join Excite! - http://www.excite.com The most personalized portal on the Web!
[s.chicken@excite.com: lyxpipe problem]
Please reply to the reply-to: below. Mate - Forwarded message from n/a [EMAIL PROTECTED] - Delivered-To: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: lyxpipe problem X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: ID = d4113387333551f97a0df1c851c3d34a Reply-To: [EMAIL PROTECTED] From: n/a [EMAIL PROTECTED] X-Sender: [EMAIL PROTECTED] X-Mailer: PHP Date: Sun, 20 Jun 2004 05:32:25 -0400 (EDT) Hi list, I'm pretty much a linux and lyx newbie. I have a problem with the lyxpipe. I want to get JabRef to communicate with lyx so that JabRef can insert bibliographical information into lyx-documents. After I read how to get the lyxserver pipe running (I'm not sure if I completely misunderstood that advice: insert a line into the file lyxrc.default like this: \lyxserver /home/s.chicken/.lyxpipe) I inserted that line into lyxrc. But nothing happend. Lyx didn't create the files lyxpipe.in and lyxpipe.out. So I get an error message in JabRef saying that either lyx is not working or the serverpipe isn't configured properly. Is there anything I can do to get the serverpipe runnig properly? I use LYX 1.3.4 on Suse 9.1 and JabRef 1.4 Thank you in advance! Kai (Please excuse my poor english for that I'm not a native speaker) ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! - End forwarded message -
lyxpipe problem
Hi list, I'm pretty much a linux and lyx newbie. I have a problem with the lyxpipe. I want to get JabRef to communicate with lyx so that JabRef can insert bibliographical information into lyx-documents. After I read how to get the lyxserver pipe running (I'm not sure if I completely misunderstood that advice: insert a line into the file lyxrc.default like this: \lyxserver "/home/s.chicken/.lyxpipe") I inserted that line into lyxrc. But nothing happend. Lyx didn't create the files "lyxpipe.in" and "lyxpipe.out". So I get an error message in JabRef saying that either lyx is not working or the serverpipe isn't configured properly. Is there anything I can do to get the serverpipe runnig properly? I use LYX 1.3.4 on Suse 9.1 and JabRef 1.4 Thank you in advance! Kai (Please excuse my poor english for that I'm not a native speaker) ___ Join Excite! - http://www.excite.com The most personalized portal on the Web!
[s.chicken@excite.com: lyxpipe problem]
Please reply to the reply-to: below. Mate - Forwarded message from n/a <[EMAIL PROTECTED]> - Delivered-To: [EMAIL PROTECTED] Delivered-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: lyxpipe problem X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: ID = d4113387333551f97a0df1c851c3d34a Reply-To: [EMAIL PROTECTED] From: "n/a" <[EMAIL PROTECTED]> X-Sender: [EMAIL PROTECTED] X-Mailer: PHP Date: Sun, 20 Jun 2004 05:32:25 -0400 (EDT) Hi list, I'm pretty much a linux and lyx newbie. I have a problem with the lyxpipe. I want to get JabRef to communicate with lyx so that JabRef can insert bibliographical information into lyx-documents. After I read how to get the lyxserver pipe running (I'm not sure if I completely misunderstood that advice: insert a line into the file lyxrc.default like this: \lyxserver "/home/s.chicken/.lyxpipe") I inserted that line into lyxrc. But nothing happend. Lyx didn't create the files "lyxpipe.in" and "lyxpipe.out". So I get an error message in JabRef saying that either lyx is not working or the serverpipe isn't configured properly. Is there anything I can do to get the serverpipe runnig properly? I use LYX 1.3.4 on Suse 9.1 and JabRef 1.4 Thank you in advance! Kai (Please excuse my poor english for that I'm not a native speaker) ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! - End forwarded message -
Re: gbib and lyx-1.2.3 -- .lyxpipe problem
Ben Luey wrote: I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. When I run lyx and then gbib and click on cite, it appears to connect to the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas on why the piping isn't working. If I cat something to the pipe, I get a response from the lyx server. Thanks, Ben Hello Ben, please continue this discussion on [EMAIL PROTECTED] I don't venture onto the user list as often as perhaps I should ;-) If you run lyx -dbg lyxserver you should get details of the conversation between the two programs. But you appear to know that already. I don't have LyX 1.2.3 installed here, but with LyX 1.3.2cvs (current stable branch) this works for me (below). I suspect therefore that gbib is sending a message that LyX 1.2.3 does not understand. Regards, Angus $ xlyx13x -dbg lyxserver Setting debug level to lyxserver Debugging `lyxserver' (External control interface) LyXComm: Opening connection LyXComm: Connection established LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo LYXSRV:angus:hello /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:19, read_buffer_:, cmd:LYXSRV:angus:hello LyXServer: Received: 'LYXSRV:angus:hello' LyXServer: Client: 'angus' Command: 'hello' Argument: '' LyXServer: Greeting angus LyXComm: Sending 'LYXSRV:angus:hello ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo LYXCMD:angus:file-open vki.lyx /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:31, read_buffer_:, cmd:LYXCMD:angus:file-open vki.lyx LyXServer: Received: 'LYXCMD:angus:file-open vki.lyx' LyXServer: Client: 'angus' Command: 'file-open vki.lyx' Argument: '' LyXComm: Sending 'INFO:angus:file-open vki.lyx: ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo LYXCMD:angus:citation-insert Tsuda:etal96 /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:42, read_buffer_:, cmd:LYXCMD:angus:citation-insert Tsuda:etal96 LyXServer: Received: 'LYXCMD:angus:citation-insert Tsuda:etal96' LyXServer: Client: 'angus' Command: 'citation-insert Tsuda' Argument: 'etal96' LyXComm: Sending 'INFO:angus:citation-insert Tsuda: ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established
Re: gbib and lyx-1.2.3 -- .lyxpipe problem
Ben Luey wrote: I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. When I run lyx and then gbib and click on cite, it appears to connect to the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas on why the piping isn't working. If I cat something to the pipe, I get a response from the lyx server. Thanks, Ben Hi Ben again. I have just installed the Debian package gbib-0.1.1c-2 and all works fine with lyx-1.3.2. I suspect, therefore, that the problem lies at your end. The location gbib expects to find the lyx pipes is hard-coded as pipename = getenv(HOME); pipename += /.lyxpipe; You must set your LyX preferences accordingly (use EditPreferences, InputPaths tab, LyXServer pipe /home/username/.lyxpipe) Don't miss the dot at the start of .lyxpipe. Save the preferences, restart LyX, start gbib and all should be fine. Angus
Re: gbib and lyx-1.2.3 -- .lyxpipe problem
Ben Luey wrote: I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. When I run lyx and then gbib and click on cite, it appears to connect to the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas on why the piping isn't working. If I cat something to the pipe, I get a response from the lyx server. Thanks, Ben Hello Ben, please continue this discussion on [EMAIL PROTECTED] I don't venture onto the user list as often as perhaps I should ;-) If you run lyx -dbg lyxserver you should get details of the conversation between the two programs. But you appear to know that already. I don't have LyX 1.2.3 installed here, but with LyX 1.3.2cvs (current stable branch) this works for me (below). I suspect therefore that gbib is sending a message that LyX 1.2.3 does not understand. Regards, Angus $ xlyx13x -dbg lyxserver Setting debug level to lyxserver Debugging `lyxserver' (External control interface) LyXComm: Opening connection LyXComm: Connection established LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo LYXSRV:angus:hello /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:19, read_buffer_:, cmd:LYXSRV:angus:hello LyXServer: Received: 'LYXSRV:angus:hello' LyXServer: Client: 'angus' Command: 'hello' Argument: '' LyXServer: Greeting angus LyXComm: Sending 'LYXSRV:angus:hello ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo LYXCMD:angus:file-open vki.lyx /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:31, read_buffer_:, cmd:LYXCMD:angus:file-open vki.lyx LyXServer: Received: 'LYXCMD:angus:file-open vki.lyx' LyXServer: Client: 'angus' Command: 'file-open vki.lyx' Argument: '' LyXComm: Sending 'INFO:angus:file-open vki.lyx: ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo LYXCMD:angus:citation-insert Tsuda:etal96 /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:42, read_buffer_:, cmd:LYXCMD:angus:citation-insert Tsuda:etal96 LyXServer: Received: 'LYXCMD:angus:citation-insert Tsuda:etal96' LyXServer: Client: 'angus' Command: 'citation-insert Tsuda' Argument: 'etal96' LyXComm: Sending 'INFO:angus:citation-insert Tsuda: ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established
Re: gbib and lyx-1.2.3 -- .lyxpipe problem
Ben Luey wrote: I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. When I run lyx and then gbib and click on cite, it appears to connect to the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas on why the piping isn't working. If I cat something to the pipe, I get a response from the lyx server. Thanks, Ben Hi Ben again. I have just installed the Debian package gbib-0.1.1c-2 and all works fine with lyx-1.3.2. I suspect, therefore, that the problem lies at your end. The location gbib expects to find the lyx pipes is hard-coded as pipename = getenv(HOME); pipename += /.lyxpipe; You must set your LyX preferences accordingly (use EditPreferences, InputPaths tab, LyXServer pipe /home/username/.lyxpipe) Don't miss the dot at the start of .lyxpipe. Save the preferences, restart LyX, start gbib and all should be fine. Angus
Re: gbib and lyx-1.2.3 -- .lyxpipe problem
Ben Luey wrote: > I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the > pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. > When I run lyx and then gbib and click on cite, it appears to connect to > the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, > nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas > on why the piping isn't working. If I cat something to the pipe, I get a > response from the lyx server. > > Thanks, > > Ben Hello Ben, please continue this discussion on [EMAIL PROTECTED] I don't venture onto the user list as often as perhaps I should ;-) If you run "lyx -dbg lyxserver" you should get details of the conversation between the two programs. But you appear to know that already. I don't have LyX 1.2.3 installed here, but with LyX 1.3.2cvs (current stable branch) this works for me (below). I suspect therefore that gbib is sending a message that LyX 1.2.3 does not understand. Regards, Angus $ xlyx13x -dbg lyxserver Setting debug level to lyxserver Debugging `lyxserver' (External control interface) LyXComm: Opening connection LyXComm: Connection established LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo "LYXSRV:angus:hello" > /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:19, read_buffer_:, cmd:LYXSRV:angus:hello LyXServer: Received: 'LYXSRV:angus:hello' LyXServer: Client: 'angus' Command: 'hello' Argument: '' LyXServer: Greeting angus LyXComm: Sending 'LYXSRV:angus:hello ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo "LYXCMD:angus:file-open vki.lyx" > /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:31, read_buffer_:, cmd:LYXCMD:angus:file-open vki.lyx LyXServer: Received: 'LYXCMD:angus:file-open vki.lyx' LyXServer: Client: 'angus' Command: 'file-open vki.lyx' Argument: '' LyXComm: Sending 'INFO:angus:file-open vki.lyx: ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established $ echo "LYXCMD:angus:citation-insert Tsuda:etal96" > /home/angus/.lyx-1.3.2cvs/angus.in LyXComm: status:42, read_buffer_:, cmd:LYXCMD:angus:citation-insert Tsuda:etal96 LyXServer: Received: 'LYXCMD:angus:citation-insert Tsuda:etal96' LyXServer: Client: 'angus' Command: 'citation-insert Tsuda' Argument: 'etal96' LyXComm: Sending 'INFO:angus:citation-insert Tsuda: ' LyXComm: Closing connection LyXComm: Opening connection LyXComm: Connection established
Re: gbib and lyx-1.2.3 -- .lyxpipe problem
Ben Luey wrote:
> I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx
> for the pipe to have the path /home/username/.lyxpipe. It creates
> the pipe fine. When I run lyx and then gbib and click on cite, it
> appears to connect to the lyxpipe, but when I clikc on insert cite
> or insert bibtex, etc, nothing appears in my lyx document. Does gbib
> support lyx-1.2? Any ideas on why the piping isn't working. If I cat
> something to the pipe, I get a response from the lyx server.
>
> Thanks,
>
> Ben
Hi Ben again.
I have just installed the Debian package gbib-0.1.1c-2 and all works
fine with lyx-1.3.2. I suspect, therefore, that the problem lies at
your end.
The location gbib expects to find the lyx pipes is hard-coded as
pipename = getenv("HOME");
pipename += "/.lyxpipe";
You must set your LyX preferences accordingly (use Edit>Preferences,
Input>Paths tab, LyXServer pipe /home//.lyxpipe) Don't miss
the at the start of .lyxpipe. Save the preferences, restart
LyX, start gbib and all should be fine.
Angus
gbib and lyx-1.2.3 -- .lyxpipe problem
I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. When I run lyx and then gbib and click on cite, it appears to connect to the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas on why the piping isn't working. If I cat something to the pipe, I get a response from the lyx server. Thanks, Ben Ben Luey [EMAIL PROTECTED]
gbib and lyx-1.2.3 -- .lyxpipe problem
I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. When I run lyx and then gbib and click on cite, it appears to connect to the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas on why the piping isn't working. If I cat something to the pipe, I get a response from the lyx server. Thanks, Ben Ben Luey [EMAIL PROTECTED]
gbib and lyx-1.2.3 -- .lyxpipe problem
I have lyx-1.2.3 and gbib-0.1.1 (Mandrake-9.1). I reconfigured lyx for the pipe to have the path /home/username/.lyxpipe. It creates the pipe fine. When I run lyx and then gbib and click on cite, it appears to connect to the lyxpipe, but when I clikc on insert cite or insert bibtex, etc, nothing appears in my lyx document. Does gbib support lyx-1.2? Any ideas on why the piping isn't working. If I cat something to the pipe, I get a response from the lyx server. Thanks, Ben Ben Luey [EMAIL PROTECTED]
