Re: [M100] CRT not working with DVI anymore.

[William McKay]

The DVI uses separate inputs, one for the composite and one for the RF.  The 
switch is to select channel 3 or 4 on the RF input.  I’ve cleaned the inputs.  
I’d say that’s not it, I was hoping that was it a week ago that’s when I 
cleaned the inputs.  I’d love to try the RF input but I no longer have an 
analog TV set and RF converter.

William

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Mike Stein<mailto:mhs.st...@gmail.com>
Sent: Sunday, October 4, 2020 4:49 PM
To: m...@bitchin100.com<mailto:m...@bitchin100.com>
Subject: Re: [M100] CRT not working with DVI anymore.

Any chance it's a little oxidation on the RF/composite selector switch?


On Sun, Oct 4, 2020 at 3:58 PM William McKay 
mailto:pfra...@outlook.com>> wrote:


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
Using a Commodore 1084S monitor.  Monitor works perfect with several other 
systems in composite mode.  It use to work with my Model 100 DVI but started 
sometimes not coming on and now only comes on about one in ten tries.  When it 
work it works perfect except I’ve seen it go out after about an hour several 
times?

Anyone got a starting point for me to check?  I did add a 2nd drive and this 
issues started slowly after but is getting worse.  Might the old power supply 
not be up to my additional drive?

Thanks,
William

[M100] CRT not working with DVI anymore.

[William McKay]

Sent from Mail for Windows 10
Using a Commodore 1084S monitor.  Monitor works perfect with several other 
systems in composite mode.  It use to work with my Model 100 DVI but started 
sometimes not coming on and now only comes on about one in ten tries.  When it 
work it works perfect except I’ve seen it go out after about an hour several 
times?

Anyone got a starting point for me to check?  I did add a 2nd drive and this 
issues started slowly after but is getting worse.  Might the old power supply 
not be up to my additional drive?

Thanks,
William

Re: [M100] REX Classic

[William McKay]

You were correct.  I put a meter between the chip and the contacts and one was 
dead.  One of the pins in the option rom socket was not fully deployed.  The 
other rom’s I’ve used were able to connect but the REX could not.  After 
pulling the pin out to it’s correct location it work perfect.

Thanks for the heads up on that issue.
Framer

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Gregory McGill<mailto:arcadeshop...@gmail.com>
Sent: Thursday, May 21, 2020 2:44 PM
To: m...@bitchin100.com<mailto:m...@bitchin100.com>
Subject: Re: [M100] REX Classic

usually this is a contact issue..


On Thu, May 21, 2020 at 10:52 AM Stephen Adolph 
mailto:twospru...@gmail.com>> wrote:
Hi,  hard to say.  what design is it?  Is it from me or other? (sorry if I 
don't recall)
Steve

On Thu, May 21, 2020 at 1:43 PM William McKay 
mailto:pfra...@outlook.com>> wrote:
I have two Model 100 USA model numbers and the same.  REX works perfect in one 
and hang when the call 63012 is issued and need a cold boot.  Both work perfect 
with other roms, Super and Lucid.

Any ideas what might be causing this?

Thanks
framer

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

[M100] REX Classic

[William McKay]

I have two Model 100 USA model numbers and the same.  REX works perfect in one 
and hang when the call 63012 is issued and need a cold boot.  Both work perfect 
with other roms, Super and Lucid.

Any ideas what might be causing this?

Thanks
framer

Sent from Mail for Windows 10