Re: why my LCD monitor repeat black screen

2006-11-02 Thread Baskervilles 

I'm not inclined to believe it is a problem with your monitor, however,
sometimes X picks some really boarder-line specs...and I've seen at
least CRTs flake out when run at the edge for too long.

Run xvidtune, see what the vertical refresh rate is.  If you took great
pride in running it up to some high number, slap yourself on the wrist,
and back it down to 60Hz or 70Hz, see if it settles it down.  On an LCD
monitor, it doesn't matter.

It may be more likely, however, that your machine's BIOS is turning the
display off, and it is not recognizing the keyboard or mouse activity to
keep it on or turn it back on.  Going into your BIOS configuration and
disabling anything related to power saving may be productive.



I tried change setting in BIOS, but problem still in there. and test
with a CRT monitor get same problem. it's really wired.

why my LCD monitor repeat black screen

2006-10-30 Thread Baskervilles 
Hello,

I'm using OB3.9 release version, and X.org plus fvwm2, after start X
windows, what I got is my LCD monitor repeat black screen between several
minutes, even there have keyboard and mouse movement. after black screen, I
can ctrl+alt+F1 then ctrl_alt+F5 to switch back screen. keyboard and mouse
still can respond when black. I even disable DPMS and xscreensave, it still
repeat.

is this a LCD HW problem? but  not happen in winxp installed same PC. LCD is
a ViewSonic 903b.

Thanks in advence.

follow is dmesg and xset q output.

dmesg**

OpenBSD 3.9 (GENERIC) #617: Thu Mar  2 02:26:48 MST 2006
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1700+ (AuthenticAMD 686-class, 256KB L2 cache)
1.48 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: TS
real mem  = 804823040 (785960K)
avail mem = 726990848 (709952K)
using 4278 buffers containing 40345600 bytes (39400K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e0) BIOS, date 01/14/03, BIOS32 rev. 0 @ 0xf9b60
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf/0xc604
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc580/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 6 10 11
pcibios0: PCI Interrupt Router at 000:17:0 (VIA VT8235 ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc/0xec00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 VIA VT8366 PCI rev 0x00
ppb0 at pci0 dev 1 function 0 VIA VT8366 AGP rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 NVIDIA GeForce4 MX 440 rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 11 function 0 Realtek 8139 rev 0x10: irq 11, address
00:e0:4c:93:7f:f1
rlphy0 at rl0 phy 0: RTL internal PHY
uhci0 at pci0 dev 16 function 0 VIA VT83C572 USB rev 0x80: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 VIA VT83C572 USB rev 0x80: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 VIA VT83C572 USB rev 0x80: irq 6
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 VIA VT6202 USB rev 0x82: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
viapm0 at pci0 dev 17 function 0 VIA VT8235 ISA rev 0x00
iic0 at viapm0
unknown at iic0 addr 0x18 not configured
maxtmp0 at iic0 addr 0x4c: lm90
pciide0 at pci0 dev 17 function 1 VIA VT82C571 IDE rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: ST380021A
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: Maxtor 31536H2
wd1: 16-sector PIO, LBA, 14324MB, 29336832 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: TECLAST, 52 CD-ROM, 0.3E SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
auvia0 at pci0 dev 17 function 5 VIA VT8233 AC97 rev 0x50: irq 6
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0a:  aborted command, interface CRC error reading fsbn 128 of 128-143 (wd0
bn 86044268; cn 85361 tn 6 sn 2), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd0a:  aborted command, interface CRC error reading fsbn 128 of 128-143 (wd0
bn 86044268; cn 85361 tn 6 sn 2), retrying
wd0: soft

Re: Is it possible to install old packages on new release

2006-09-24 Thread Baskervilles 
packages just pre-compiled binaries of ports. so it also need sync with
system

On 9/25/06, Igor Zinovik [EMAIL PROTECTED] wrote:

 Hello, misc readers.
 Maybe my question is obvious, but i want to know could one install old
 packages
 on new release? My situation is following: i have OpenBSD_3_8 and a lot of
 packages on CD with OPENBSD_3_6. Docs say: Dont mix OpenBSD system and
 ports
 version, keep system and ports in sync, but it dont say anything about
 packages.