Re: OpenBSD 5.6 - amd64 on Lenovo G480
On 15.12.2014 04:46, Leonardo Santagostini wrote: Hello bodie, Tried snapshot with same results. Mmm I have similar crap at home. Lenovo G580 model 20150. I would be surprised if anything behind Windows and Linux (with a lot of complications as I found) will be running properly here. One of those - hey we propagate this inside, but in fact there's this inside secretely hidden :-) --- dmesg --- Dec 14 20:14:41 notleo syslogd: start Dec 14 20:14:41 notleo /bsd: OpenBSD 5.6-current (RAMDISK_CD) #631: Sun Dec 14 10:45:08 MST 2014 Dec 14 20:14:41 notleo /bsd: dera...@amd64.openbsd.org: /usr/src/sys/arch/amd64/compile/RAMDISK_CD Dec 14 20:14:41 notleo /bsd: RTC BIOS diagnostic error 80clock_battery Dec 14 20:14:41 notleo /bsd: real mem = 4138713088 (3946MB) Dec 14 20:14:41 notleo /bsd: avail mem = 4026851328 (3840MB) Dec 14 20:14:41 notleo /bsd: mainbus0 at root Dec 14 20:14:41 notleo /bsd: bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries) Dec 14 20:14:41 notleo /bsd: bios0: vendor LENOVO version 5ECN95WW(V9.00) date 12/19/2012 Dec 14 20:14:41 notleo /bsd: bios0: LENOVO 20150 Dec 14 20:14:41 notleo /bsd: acpi0 at bios0: rev 2 Dec 14 20:14:41 notleo /bsd: acpi0: sleep states S0 S3 S4 S5 Dec 14 20:14:41 notleo /bsd: acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT MSDM SSDT SSDT Dec 14 20:14:41 notleo /bsd: acpimadt0 at acpi0 addr 0xfee0: PC-AT compat Dec 14 20:14:41 notleo /bsd: cpu0 at mainbus0: apid 0 (boot processor) Dec 14 20:14:41 notleo /bsd: cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2394.92 MHz Dec 14 20:14:41 notleo /bsd: cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC Dec 14 20:14:41 notleo /bsd: cpu0: 256KB 64b/line 8-way L2 cache Dec 14 20:14:41 notleo /bsd: cpu0: apic clock running at 99MHz Dec 14 20:14:41 notleo /bsd: cpu at mainbus0: not configured Dec 14 20:14:41 notleo /bsd: ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins Dec 14 20:14:41 notleo /bsd: acpiprt0 at acpi0: bus 0 (PCI0) Dec 14 20:14:41 notleo /bsd: acpiprt1 at acpi0: bus -1 (P0P1) Dec 14 20:14:41 notleo /bsd: acpiprt2 at acpi0: bus 1 (RP01) Dec 14 20:14:41 notleo /bsd: acpiprt3 at acpi0: bus 2 (RP02) Dec 14 20:14:41 notleo /bsd: acpiprt4 at acpi0: bus -1 (RP03) Dec 14 20:14:41 notleo /bsd: acpiprt5 at acpi0: bus -1 (RP04) Dec 14 20:14:41 notleo /bsd: acpiprt6 at acpi0: bus -1 (RP05) Dec 14 20:14:41 notleo /bsd: acpiprt7 at acpi0: bus -1 (RP06) Dec 14 20:14:41 notleo /bsd: acpiprt8 at acpi0: bus -1 (RP07) Dec 14 20:14:41 notleo /bsd: acpiprt9 at acpi0: bus -1 (RP08) Dec 14 20:14:41 notleo /bsd: acpiprt10 at acpi0: bus -1 (PEG0) Dec 14 20:14:42 notleo /bsd: acpiprt11 at acpi0: bus -1 (PEG1) Dec 14 20:14:43 notleo /bsd: acpiprt12 at acpi0: bus -1 (PEG2) Dec 14 20:14:43 notleo /bsd: acpiprt13 at acpi0: bus -1 (PEG3) Dec 14 20:14:43 notleo /bsd: pci0 at mainbus0 bus 0 Dec 14 20:14:43 notleo /bsd: pchb0 at pci0 dev 0 function 0 Intel Core 2G Host rev 0x09 Dec 14 20:14:43 notleo /bsd: vga1 at pci0 dev 2 function 0 Intel HD Graphics 2000 rev 0x09 Dec 14 20:14:43 notleo /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Dec 14 20:14:43 notleo /bsd: xhci0 at pci0 dev 20 function 0 Intel 7 Series xHCI rev 0x04: msi Dec 14 20:14:43 notleo /bsd: usb0 at xhci0: USB revision 3.0 Dec 14 20:14:43 notleo /bsd: uhub0 at usb0 Intel xHCI root hub rev 3.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series MEI rev 0x04 at pci0 dev 22 function 0 not configured Dec 14 20:14:43 notleo /bsd: ehci0 at pci0 dev 26 function 0 Intel 7 Series USB rev 0x04: apic 0 int 16 Dec 14 20:14:43 notleo /bsd: ehci0: timed out waiting for BIOS Dec 14 20:14:43 notleo /bsd: usb1 at ehci0: USB revision 2.0 Dec 14 20:14:43 notleo /bsd: uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series HD Audio rev 0x04 at pci0 dev 27 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb0 at pci0 dev 28 function 0 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:43 notleo /bsd: pci1 at ppb0 bus 1 Dec 14 20:14:43 notleo /bsd: Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb1 at pci0 dev 28 function 1 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:44 notleo /bsd: pci2 at ppb1 bus 2 Dec 14 20:14:44 notleo /bsd: Atheros AR9485 rev 0x01 at pci2 dev 0 function 0 not configured Dec 14 20:14:44 notleo /bsd: ehci1 at pci0 dev 29 function 0 Intel 7 Series USB rev 0x04: apic 0 int 23 Dec 14 20:14:44 notleo /bsd: ehci1: timed out waiting for BIOS Dec 14 20:14:44 notleo /bsd: usb2 at ehci1: USB revision 2.0 Dec 14 20:14:44 notleo /bsd: uhub2 at usb2 Intel EHCI root hub rev 2.00/1.00 addr 1 Dec 14 20:14:44 notleo /bsd: Intel HM76 LPC rev 0x04 at pci0 dev 31 function 0
Re: OpenBSD 5.6 - amd64 on Lenovo G480
I don't have this particular Lenovo, but the three that I do have, a W530, a B590, and a V470 all work fine with either OpenSUSE, Ubuntu, or Fedora. On Mon, 15 Dec 2014, bodie wrote: On 15.12.2014 04:46, Leonardo Santagostini wrote: Hello bodie, Tried snapshot with same results. Mmm I have similar crap at home. Lenovo G580 model 20150. I would be surprised if anything behind Windows and Linux (with a lot of complications as I found) will be running properly here. One of those - hey we propagate this inside, but in fact there's this inside secretely hidden :-) --- dmesg --- Dec 14 20:14:41 notleo syslogd: start Dec 14 20:14:41 notleo /bsd: OpenBSD 5.6-current (RAMDISK_CD) #631: Sun Dec 14 10:45:08 MST 2014 Dec 14 20:14:41 notleo /bsd: dera...@amd64.openbsd.org: /usr/src/sys/arch/amd64/compile/RAMDISK_CD Dec 14 20:14:41 notleo /bsd: RTC BIOS diagnostic error 80clock_battery Dec 14 20:14:41 notleo /bsd: real mem = 4138713088 (3946MB) Dec 14 20:14:41 notleo /bsd: avail mem = 4026851328 (3840MB) Dec 14 20:14:41 notleo /bsd: mainbus0 at root Dec 14 20:14:41 notleo /bsd: bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries) Dec 14 20:14:41 notleo /bsd: bios0: vendor LENOVO version 5ECN95WW(V9.00) date 12/19/2012 Dec 14 20:14:41 notleo /bsd: bios0: LENOVO 20150 Dec 14 20:14:41 notleo /bsd: acpi0 at bios0: rev 2 Dec 14 20:14:41 notleo /bsd: acpi0: sleep states S0 S3 S4 S5 Dec 14 20:14:41 notleo /bsd: acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT MSDM SSDT SSDT Dec 14 20:14:41 notleo /bsd: acpimadt0 at acpi0 addr 0xfee0: PC-AT compat Dec 14 20:14:41 notleo /bsd: cpu0 at mainbus0: apid 0 (boot processor) Dec 14 20:14:41 notleo /bsd: cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2394.92 MHz Dec 14 20:14:41 notleo /bsd: cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC Dec 14 20:14:41 notleo /bsd: cpu0: 256KB 64b/line 8-way L2 cache Dec 14 20:14:41 notleo /bsd: cpu0: apic clock running at 99MHz Dec 14 20:14:41 notleo /bsd: cpu at mainbus0: not configured Dec 14 20:14:41 notleo /bsd: ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins Dec 14 20:14:41 notleo /bsd: acpiprt0 at acpi0: bus 0 (PCI0) Dec 14 20:14:41 notleo /bsd: acpiprt1 at acpi0: bus -1 (P0P1) Dec 14 20:14:41 notleo /bsd: acpiprt2 at acpi0: bus 1 (RP01) Dec 14 20:14:41 notleo /bsd: acpiprt3 at acpi0: bus 2 (RP02) Dec 14 20:14:41 notleo /bsd: acpiprt4 at acpi0: bus -1 (RP03) Dec 14 20:14:41 notleo /bsd: acpiprt5 at acpi0: bus -1 (RP04) Dec 14 20:14:41 notleo /bsd: acpiprt6 at acpi0: bus -1 (RP05) Dec 14 20:14:41 notleo /bsd: acpiprt7 at acpi0: bus -1 (RP06) Dec 14 20:14:41 notleo /bsd: acpiprt8 at acpi0: bus -1 (RP07) Dec 14 20:14:41 notleo /bsd: acpiprt9 at acpi0: bus -1 (RP08) Dec 14 20:14:41 notleo /bsd: acpiprt10 at acpi0: bus -1 (PEG0) Dec 14 20:14:42 notleo /bsd: acpiprt11 at acpi0: bus -1 (PEG1) Dec 14 20:14:43 notleo /bsd: acpiprt12 at acpi0: bus -1 (PEG2) Dec 14 20:14:43 notleo /bsd: acpiprt13 at acpi0: bus -1 (PEG3) Dec 14 20:14:43 notleo /bsd: pci0 at mainbus0 bus 0 Dec 14 20:14:43 notleo /bsd: pchb0 at pci0 dev 0 function 0 Intel Core 2G Host rev 0x09 Dec 14 20:14:43 notleo /bsd: vga1 at pci0 dev 2 function 0 Intel HD Graphics 2000 rev 0x09 Dec 14 20:14:43 notleo /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Dec 14 20:14:43 notleo /bsd: xhci0 at pci0 dev 20 function 0 Intel 7 Series xHCI rev 0x04: msi Dec 14 20:14:43 notleo /bsd: usb0 at xhci0: USB revision 3.0 Dec 14 20:14:43 notleo /bsd: uhub0 at usb0 Intel xHCI root hub rev 3.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series MEI rev 0x04 at pci0 dev 22 function 0 not configured Dec 14 20:14:43 notleo /bsd: ehci0 at pci0 dev 26 function 0 Intel 7 Series USB rev 0x04: apic 0 int 16 Dec 14 20:14:43 notleo /bsd: ehci0: timed out waiting for BIOS Dec 14 20:14:43 notleo /bsd: usb1 at ehci0: USB revision 2.0 Dec 14 20:14:43 notleo /bsd: uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series HD Audio rev 0x04 at pci0 dev 27 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb0 at pci0 dev 28 function 0 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:43 notleo /bsd: pci1 at ppb0 bus 1 Dec 14 20:14:43 notleo /bsd: Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb1 at pci0 dev 28 function 1 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:44 notleo /bsd: pci2 at ppb1 bus 2 Dec 14 20:14:44 notleo /bsd: Atheros AR9485 rev 0x01 at pci2 dev 0 function 0 not configured Dec 14 20:14:44 notleo /bsd: ehci1 at pci0 dev 29 function 0 Intel 7
Re: OpenBSD 5.6 - amd64 on Lenovo G480
Yup, il install 5.5 again and will wait to 5.7 maybe will work in 5.7 Regards and thanks! Saludos.- Leonardo Santagostini http://ar.linkedin.com/in/santagostini 2014-12-15 2:10 GMT-03:00 bodie bodz...@openbsd.cz: On 15.12.2014 04:46, Leonardo Santagostini wrote: Hello bodie, Tried snapshot with same results. Mmm I have similar crap at home. Lenovo G580 model 20150. I would be surprised if anything behind Windows and Linux (with a lot of complications as I found) will be running properly here. One of those - hey we propagate this inside, but in fact there's this inside secretely hidden :-) --- dmesg --- Dec 14 20:14:41 notleo syslogd: start Dec 14 20:14:41 notleo /bsd: OpenBSD 5.6-current (RAMDISK_CD) #631: Sun Dec 14 10:45:08 MST 2014 Dec 14 20:14:41 notleo /bsd: dera...@amd64.openbsd.org: /usr/src/sys/arch/amd64/compile/RAMDISK_CD Dec 14 20:14:41 notleo /bsd: RTC BIOS diagnostic error 80clock_battery Dec 14 20:14:41 notleo /bsd: real mem = 4138713088 (3946MB) Dec 14 20:14:41 notleo /bsd: avail mem = 4026851328 (3840MB) Dec 14 20:14:41 notleo /bsd: mainbus0 at root Dec 14 20:14:41 notleo /bsd: bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries) Dec 14 20:14:41 notleo /bsd: bios0: vendor LENOVO version 5ECN95WW(V9.00) date 12/19/2012 Dec 14 20:14:41 notleo /bsd: bios0: LENOVO 20150 Dec 14 20:14:41 notleo /bsd: acpi0 at bios0: rev 2 Dec 14 20:14:41 notleo /bsd: acpi0: sleep states S0 S3 S4 S5 Dec 14 20:14:41 notleo /bsd: acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT MSDM SSDT SSDT Dec 14 20:14:41 notleo /bsd: acpimadt0 at acpi0 addr 0xfee0: PC-AT compat Dec 14 20:14:41 notleo /bsd: cpu0 at mainbus0: apid 0 (boot processor) Dec 14 20:14:41 notleo /bsd: cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2394.92 MHz Dec 14 20:14:41 notleo /bsd: cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16, xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE, NXE,LONG,LAHF,PERF,ITSC Dec 14 20:14:41 notleo /bsd: cpu0: 256KB 64b/line 8-way L2 cache Dec 14 20:14:41 notleo /bsd: cpu0: apic clock running at 99MHz Dec 14 20:14:41 notleo /bsd: cpu at mainbus0: not configured Dec 14 20:14:41 notleo /bsd: ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins Dec 14 20:14:41 notleo /bsd: acpiprt0 at acpi0: bus 0 (PCI0) Dec 14 20:14:41 notleo /bsd: acpiprt1 at acpi0: bus -1 (P0P1) Dec 14 20:14:41 notleo /bsd: acpiprt2 at acpi0: bus 1 (RP01) Dec 14 20:14:41 notleo /bsd: acpiprt3 at acpi0: bus 2 (RP02) Dec 14 20:14:41 notleo /bsd: acpiprt4 at acpi0: bus -1 (RP03) Dec 14 20:14:41 notleo /bsd: acpiprt5 at acpi0: bus -1 (RP04) Dec 14 20:14:41 notleo /bsd: acpiprt6 at acpi0: bus -1 (RP05) Dec 14 20:14:41 notleo /bsd: acpiprt7 at acpi0: bus -1 (RP06) Dec 14 20:14:41 notleo /bsd: acpiprt8 at acpi0: bus -1 (RP07) Dec 14 20:14:41 notleo /bsd: acpiprt9 at acpi0: bus -1 (RP08) Dec 14 20:14:41 notleo /bsd: acpiprt10 at acpi0: bus -1 (PEG0) Dec 14 20:14:42 notleo /bsd: acpiprt11 at acpi0: bus -1 (PEG1) Dec 14 20:14:43 notleo /bsd: acpiprt12 at acpi0: bus -1 (PEG2) Dec 14 20:14:43 notleo /bsd: acpiprt13 at acpi0: bus -1 (PEG3) Dec 14 20:14:43 notleo /bsd: pci0 at mainbus0 bus 0 Dec 14 20:14:43 notleo /bsd: pchb0 at pci0 dev 0 function 0 Intel Core 2G Host rev 0x09 Dec 14 20:14:43 notleo /bsd: vga1 at pci0 dev 2 function 0 Intel HD Graphics 2000 rev 0x09 Dec 14 20:14:43 notleo /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Dec 14 20:14:43 notleo /bsd: xhci0 at pci0 dev 20 function 0 Intel 7 Series xHCI rev 0x04: msi Dec 14 20:14:43 notleo /bsd: usb0 at xhci0: USB revision 3.0 Dec 14 20:14:43 notleo /bsd: uhub0 at usb0 Intel xHCI root hub rev 3.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series MEI rev 0x04 at pci0 dev 22 function 0 not configured Dec 14 20:14:43 notleo /bsd: ehci0 at pci0 dev 26 function 0 Intel 7 Series USB rev 0x04: apic 0 int 16 Dec 14 20:14:43 notleo /bsd: ehci0: timed out waiting for BIOS Dec 14 20:14:43 notleo /bsd: usb1 at ehci0: USB revision 2.0 Dec 14 20:14:43 notleo /bsd: uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series HD Audio rev 0x04 at pci0 dev 27 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb0 at pci0 dev 28 function 0 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:43 notleo /bsd: pci1 at ppb0 bus 1 Dec 14 20:14:43 notleo /bsd: Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb1 at pci0 dev 28 function 1 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:44 notleo /bsd: pci2 at ppb1 bus 2 Dec 14 20:14:44 notleo /bsd: Atheros AR9485 rev 0x01 at pci2 dev 0 function 0 not configured Dec 14 20:14:44 notleo /bsd: ehci1 at pci0 dev 29 function 0 Intel 7 Series USB rev 0x04: apic 0 int 23 Dec
Re: OpenBSD 5.6 - amd64 on Lenovo G480
On 13.12.2014 15:47, Leonardo Santagostini wrote: Ok, thanks all for reply me. Situation Fresh New Install. 5.6 Release. OpenBsd Installed fine. Logged in as root - startx - blank screen. I have to press CTRL+ALT+F1 to get console(blank) close the lid - suspend the machine - open the lid - on console again. Done my homework Not yet. Did you try -current snapshot? ;-) --- DMESG --- OpenBSD 5.6 (RAMDISK_CD) #303: Fri Aug 8 00:25:26 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD RTC BIOS diagnostic error 80clock_battery real mem = 4138713088 (3946MB) avail mem = 4023148544 (3836MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries) bios0: vendor LENOVO version 5ECN95WW(V9.00) date 12/19/2012 bios0: LENOVO 20150 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT MSDM SSDT SSDT acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2203.97 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel Core 2G Host rev 0x09 vga1 at pci0 dev 2 function 0 Intel HD Graphics 2000 rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Intel 7 Series xHCI rev 0x04 at pci0 dev 20 function 0 not configured Intel 7 Series MEI rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 Intel 7 Series USB rev 0x04: apic 0 int 16 ehci0: timed out waiting for BIOS usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 Intel 7 Series HD Audio rev 0x04 at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0 Intel 7 Series PCIE rev 0xc4: msi pci1 at ppb0 bus 1 Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 Intel 7 Series PCIE rev 0xc4: msi pci2 at ppb1 bus 2 Atheros AR9485 rev 0x01 at pci2 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 Intel 7 Series USB rev 0x04: apic 0 int 23 ehci1: timed out waiting for BIOS usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Intel HM76 LPC rev 0x04 at pci0 dev 31 function 0 not configured ahci0 at pci0 dev 31 function 2 Intel 7 Series AHCI rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: ATA, ST1000LM024 HN-M, 2AR1 SCSI3 0/direct fixed naa.50004cf20a2e7a39 sd0: 953869MB, 512 bytes/sector, 1953525168 sectors cd0 at scsibus0 targ 2 lun 0: PLDS, DVD-RW DS8A8SH, KL31 ATAPI 5/cdrom removable Intel 7 Series SMBus rev 0x04 at pci0 dev 31 function 3 not configured isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 uhub2 at uhub0 port 1 vendor 0x8087 product 0x0024 rev 2.00/0.00 addr 2 umass0 at uhub2 port 2 configuration 1 interface 0 Kingston DataTraveler 2.0 rev 2.00/1.00 addr 3 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: Kingston, DataTraveler 2.0, 1.00 SCSI2 0/direct removable serial.09306544CE51C98D948F sd1: 7396MB, 512 bytes/sector, 15148608 sectors Atheros Communications Bluetooth USB Host Controller rev 1.10/0.01 addr 4 at uhub2 port 3 not configured Generic USB2.0-CRW rev 2.00/39.60 addr 5 at uhub2 port 4 not configured uhub3 at uhub1 port 1 vendor 0x8087 product 0x0024 rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 3 configuration 1 interface 0 vendor 0x0461 USB Optical Mouse rev 2.00/2.00 addr 3 uhidev0: iclass 3/1 uhid at uhidev0 not configured run0 at uhub3 port 4 Linksys Linksys WUSB600N Wireless-N USB Network Adapter with Dual-Band ver. 2 rev 2.00/1.01 addr 4 run0: MAC/BBP RT3572 (rev 0x0223), RF RT3052 (MIMO 2T2R), address 98:fc:11:e0:59:0a Vimicro Corp. Lenovo EasyCamera rev 2.00/39.55 addr 5 at uhub3 port 6 not configured softraid0 at root scsibus2 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b syncing disks... done rebooting... OpenBSD
Re: OpenBSD 5.6 - amd64 on Lenovo G480
If it is intel 2000, it should work, just as on my current right now. To have it on, I had to go to bios and lower how much memory I set for graphics. It might not be your case, but nothing stops you to try out. Best regards Zoran
Re: OpenBSD 5.6 - amd64 on Lenovo G480
Hello bodie, ill try -current snapshot today at nigth and let you know the results. Thanks for the reply =) Saludos.- Leonardo Santagostini http://ar.linkedin.com/in/santagostini 2014-12-14 4:59 GMT-03:00 bodie bodz...@openbsd.cz: On 13.12.2014 15:47, Leonardo Santagostini wrote: Ok, thanks all for reply me. Situation Fresh New Install. 5.6 Release. OpenBsd Installed fine. Logged in as root - startx - blank screen. I have to press CTRL+ALT+F1 to get console(blank) close the lid - suspend the machine - open the lid - on console again. Done my homework Not yet. Did you try -current snapshot? ;-) --- DMESG --- OpenBSD 5.6 (RAMDISK_CD) #303: Fri Aug 8 00:25:26 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD RTC BIOS diagnostic error 80clock_battery real mem = 4138713088 (3946MB) avail mem = 4023148544 (3836MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries) bios0: vendor LENOVO version 5ECN95WW(V9.00) date 12/19/2012 bios0: LENOVO 20150 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT MSDM SSDT SSDT acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2203.97 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16, xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE, NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel Core 2G Host rev 0x09 vga1 at pci0 dev 2 function 0 Intel HD Graphics 2000 rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Intel 7 Series xHCI rev 0x04 at pci0 dev 20 function 0 not configured Intel 7 Series MEI rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 Intel 7 Series USB rev 0x04: apic 0 int 16 ehci0: timed out waiting for BIOS usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 Intel 7 Series HD Audio rev 0x04 at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0 Intel 7 Series PCIE rev 0xc4: msi pci1 at ppb0 bus 1 Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 Intel 7 Series PCIE rev 0xc4: msi pci2 at ppb1 bus 2 Atheros AR9485 rev 0x01 at pci2 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 Intel 7 Series USB rev 0x04: apic 0 int 23 ehci1: timed out waiting for BIOS usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Intel HM76 LPC rev 0x04 at pci0 dev 31 function 0 not configured ahci0 at pci0 dev 31 function 2 Intel 7 Series AHCI rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: ATA, ST1000LM024 HN-M, 2AR1 SCSI3 0/direct fixed naa.50004cf20a2e7a39 sd0: 953869MB, 512 bytes/sector, 1953525168 sectors cd0 at scsibus0 targ 2 lun 0: PLDS, DVD-RW DS8A8SH, KL31 ATAPI 5/cdrom removable Intel 7 Series SMBus rev 0x04 at pci0 dev 31 function 3 not configured isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 uhub2 at uhub0 port 1 vendor 0x8087 product 0x0024 rev 2.00/0.00 addr 2 umass0 at uhub2 port 2 configuration 1 interface 0 Kingston DataTraveler 2.0 rev 2.00/1.00 addr 3 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: Kingston, DataTraveler 2.0, 1.00 SCSI2 0/direct removable serial.09306544CE51C98D948F sd1: 7396MB, 512 bytes/sector, 15148608 sectors Atheros Communications Bluetooth USB Host Controller rev 1.10/0.01 addr 4 at uhub2 port 3 not configured Generic USB2.0-CRW rev 2.00/39.60 addr 5 at uhub2 port 4 not configured uhub3 at uhub1 port 1 vendor 0x8087 product 0x0024 rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 3 configuration 1 interface 0 vendor 0x0461 USB Optical Mouse rev 2.00/2.00 addr 3 uhidev0: iclass 3/1 uhid at uhidev0 not configured run0 at uhub3 port 4 Linksys Linksys WUSB600N Wireless-N USB Network Adapter with Dual-Band ver. 2 rev
Re: OpenBSD 5.6 - amd64 on Lenovo G480
Hi Zoran thanks for the reposnse. I dont have the option to lower or raise the memory asigned for video in my BIOS. I have a few options regarding working mode for hard disk, and setting optimized for W8 and Other OS But, on 5.5 i was able to work on the same notebook without issues. Best regards ! Saludos.- Leonardo Santagostini http://ar.linkedin.com/in/santagostini 2014-12-14 12:30 GMT-03:00 Zoran Kolic zko...@sbb.rs: If it is intel 2000, it should work, just as on my current right now. To have it on, I had to go to bios and lower how much memory I set for graphics. It might not be your case, but nothing stops you to try out. Best regards Zoran
Re: OpenBSD 5.6 - amd64 on Lenovo G480
Hello bodie, Tried snapshot with same results. --- dmesg --- Dec 14 20:14:41 notleo syslogd: start Dec 14 20:14:41 notleo /bsd: OpenBSD 5.6-current (RAMDISK_CD) #631: Sun Dec 14 10:45:08 MST 2014 Dec 14 20:14:41 notleo /bsd: dera...@amd64.openbsd.org: /usr/src/sys/arch/amd64/compile/RAMDISK_CD Dec 14 20:14:41 notleo /bsd: RTC BIOS diagnostic error 80clock_battery Dec 14 20:14:41 notleo /bsd: real mem = 4138713088 (3946MB) Dec 14 20:14:41 notleo /bsd: avail mem = 4026851328 (3840MB) Dec 14 20:14:41 notleo /bsd: mainbus0 at root Dec 14 20:14:41 notleo /bsd: bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries) Dec 14 20:14:41 notleo /bsd: bios0: vendor LENOVO version 5ECN95WW(V9.00) date 12/19/2012 Dec 14 20:14:41 notleo /bsd: bios0: LENOVO 20150 Dec 14 20:14:41 notleo /bsd: acpi0 at bios0: rev 2 Dec 14 20:14:41 notleo /bsd: acpi0: sleep states S0 S3 S4 S5 Dec 14 20:14:41 notleo /bsd: acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT MSDM SSDT SSDT Dec 14 20:14:41 notleo /bsd: acpimadt0 at acpi0 addr 0xfee0: PC-AT compat Dec 14 20:14:41 notleo /bsd: cpu0 at mainbus0: apid 0 (boot processor) Dec 14 20:14:41 notleo /bsd: cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2394.92 MHz Dec 14 20:14:41 notleo /bsd: cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC Dec 14 20:14:41 notleo /bsd: cpu0: 256KB 64b/line 8-way L2 cache Dec 14 20:14:41 notleo /bsd: cpu0: apic clock running at 99MHz Dec 14 20:14:41 notleo /bsd: cpu at mainbus0: not configured Dec 14 20:14:41 notleo /bsd: ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins Dec 14 20:14:41 notleo /bsd: acpiprt0 at acpi0: bus 0 (PCI0) Dec 14 20:14:41 notleo /bsd: acpiprt1 at acpi0: bus -1 (P0P1) Dec 14 20:14:41 notleo /bsd: acpiprt2 at acpi0: bus 1 (RP01) Dec 14 20:14:41 notleo /bsd: acpiprt3 at acpi0: bus 2 (RP02) Dec 14 20:14:41 notleo /bsd: acpiprt4 at acpi0: bus -1 (RP03) Dec 14 20:14:41 notleo /bsd: acpiprt5 at acpi0: bus -1 (RP04) Dec 14 20:14:41 notleo /bsd: acpiprt6 at acpi0: bus -1 (RP05) Dec 14 20:14:41 notleo /bsd: acpiprt7 at acpi0: bus -1 (RP06) Dec 14 20:14:41 notleo /bsd: acpiprt8 at acpi0: bus -1 (RP07) Dec 14 20:14:41 notleo /bsd: acpiprt9 at acpi0: bus -1 (RP08) Dec 14 20:14:41 notleo /bsd: acpiprt10 at acpi0: bus -1 (PEG0) Dec 14 20:14:42 notleo /bsd: acpiprt11 at acpi0: bus -1 (PEG1) Dec 14 20:14:43 notleo /bsd: acpiprt12 at acpi0: bus -1 (PEG2) Dec 14 20:14:43 notleo /bsd: acpiprt13 at acpi0: bus -1 (PEG3) Dec 14 20:14:43 notleo /bsd: pci0 at mainbus0 bus 0 Dec 14 20:14:43 notleo /bsd: pchb0 at pci0 dev 0 function 0 Intel Core 2G Host rev 0x09 Dec 14 20:14:43 notleo /bsd: vga1 at pci0 dev 2 function 0 Intel HD Graphics 2000 rev 0x09 Dec 14 20:14:43 notleo /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Dec 14 20:14:43 notleo /bsd: xhci0 at pci0 dev 20 function 0 Intel 7 Series xHCI rev 0x04: msi Dec 14 20:14:43 notleo /bsd: usb0 at xhci0: USB revision 3.0 Dec 14 20:14:43 notleo /bsd: uhub0 at usb0 Intel xHCI root hub rev 3.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series MEI rev 0x04 at pci0 dev 22 function 0 not configured Dec 14 20:14:43 notleo /bsd: ehci0 at pci0 dev 26 function 0 Intel 7 Series USB rev 0x04: apic 0 int 16 Dec 14 20:14:43 notleo /bsd: ehci0: timed out waiting for BIOS Dec 14 20:14:43 notleo /bsd: usb1 at ehci0: USB revision 2.0 Dec 14 20:14:43 notleo /bsd: uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Dec 14 20:14:43 notleo /bsd: Intel 7 Series HD Audio rev 0x04 at pci0 dev 27 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb0 at pci0 dev 28 function 0 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:43 notleo /bsd: pci1 at ppb0 bus 1 Dec 14 20:14:43 notleo /bsd: Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not configured Dec 14 20:14:43 notleo /bsd: ppb1 at pci0 dev 28 function 1 Intel 7 Series PCIE rev 0xc4: msi Dec 14 20:14:44 notleo /bsd: pci2 at ppb1 bus 2 Dec 14 20:14:44 notleo /bsd: Atheros AR9485 rev 0x01 at pci2 dev 0 function 0 not configured Dec 14 20:14:44 notleo /bsd: ehci1 at pci0 dev 29 function 0 Intel 7 Series USB rev 0x04: apic 0 int 23 Dec 14 20:14:44 notleo /bsd: ehci1: timed out waiting for BIOS Dec 14 20:14:44 notleo /bsd: usb2 at ehci1: USB revision 2.0 Dec 14 20:14:44 notleo /bsd: uhub2 at usb2 Intel EHCI root hub rev 2.00/1.00 addr 1 Dec 14 20:14:44 notleo /bsd: Intel HM76 LPC rev 0x04 at pci0 dev 31 function 0 not configured Dec 14 20:14:44 notleo /bsd: ahci0 at pci0 dev 31 function 2 Intel 7 Series AHCI rev 0x04: msi, AHCI 1.3 Dec 14 20:14:44 notleo /bsd: scsibus0 at ahci0: 32 targets Dec 14 20:14:44 notleo /bsd: sd0 at scsibus0 targ 0 lun 0: ATA, ST1000LM024 HN-M, 2AR1 SCSI3 0/direct fixed naa.50004cf20a2e7a39 Dec 14 20:14:44 notleo /bsd: sd0: 953869MB, 512 bytes/sector, 1953525168
Re: OpenBSD 5.6 - amd64 on Lenovo G480
Ok, thanks all for reply me. Situation Fresh New Install. 5.6 Release. OpenBsd Installed fine. Logged in as root - startx - blank screen. I have to press CTRL+ALT+F1 to get console(blank) close the lid - suspend the machine - open the lid - on console again. Done my homework --- DMESG --- OpenBSD 5.6 (RAMDISK_CD) #303: Fri Aug 8 00:25:26 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD RTC BIOS diagnostic error 80clock_battery real mem = 4138713088 (3946MB) avail mem = 4023148544 (3836MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries) bios0: vendor LENOVO version 5ECN95WW(V9.00) date 12/19/2012 bios0: LENOVO 20150 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP FPDT MSDM SSDT SSDT acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2203.97 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 0 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel Core 2G Host rev 0x09 vga1 at pci0 dev 2 function 0 Intel HD Graphics 2000 rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) Intel 7 Series xHCI rev 0x04 at pci0 dev 20 function 0 not configured Intel 7 Series MEI rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 Intel 7 Series USB rev 0x04: apic 0 int 16 ehci0: timed out waiting for BIOS usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 Intel 7 Series HD Audio rev 0x04 at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0 Intel 7 Series PCIE rev 0xc4: msi pci1 at ppb0 bus 1 Attansic Technology AR8162 rev 0x10 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 Intel 7 Series PCIE rev 0xc4: msi pci2 at ppb1 bus 2 Atheros AR9485 rev 0x01 at pci2 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 Intel 7 Series USB rev 0x04: apic 0 int 23 ehci1: timed out waiting for BIOS usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 Intel HM76 LPC rev 0x04 at pci0 dev 31 function 0 not configured ahci0 at pci0 dev 31 function 2 Intel 7 Series AHCI rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: ATA, ST1000LM024 HN-M, 2AR1 SCSI3 0/direct fixed naa.50004cf20a2e7a39 sd0: 953869MB, 512 bytes/sector, 1953525168 sectors cd0 at scsibus0 targ 2 lun 0: PLDS, DVD-RW DS8A8SH, KL31 ATAPI 5/cdrom removable Intel 7 Series SMBus rev 0x04 at pci0 dev 31 function 3 not configured isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 uhub2 at uhub0 port 1 vendor 0x8087 product 0x0024 rev 2.00/0.00 addr 2 umass0 at uhub2 port 2 configuration 1 interface 0 Kingston DataTraveler 2.0 rev 2.00/1.00 addr 3 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: Kingston, DataTraveler 2.0, 1.00 SCSI2 0/direct removable serial.09306544CE51C98D948F sd1: 7396MB, 512 bytes/sector, 15148608 sectors Atheros Communications Bluetooth USB Host Controller rev 1.10/0.01 addr 4 at uhub2 port 3 not configured Generic USB2.0-CRW rev 2.00/39.60 addr 5 at uhub2 port 4 not configured uhub3 at uhub1 port 1 vendor 0x8087 product 0x0024 rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 3 configuration 1 interface 0 vendor 0x0461 USB Optical Mouse rev 2.00/2.00 addr 3 uhidev0: iclass 3/1 uhid at uhidev0 not configured run0 at uhub3 port 4 Linksys Linksys WUSB600N Wireless-N USB Network Adapter with Dual-Band ver. 2 rev 2.00/1.01 addr 4 run0: MAC/BBP RT3572 (rev 0x0223), RF RT3052 (MIMO 2T2R), address 98:fc:11:e0:59:0a Vimicro Corp. Lenovo EasyCamera rev 2.00/39.55 addr 5 at uhub3 port 6 not configured softraid0 at root scsibus2 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b syncing disks... done rebooting... OpenBSD 5.6 (GENERIC.MP) #333: Fri Aug 8 00:20:21 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS
Re: OpenBSD 5.6 - amd64 on Lenovo G480
On 12 December 2014 at 03:50, Leonardo Santagostini lsantagost...@gmail.com wrote: Hello @misc, This mail is regarding about issues that im facing after doing a fresh install of 5.6 RELEASE and snapshot on my latptop The point is that after installing sucessfully i am trying to start X but screen goes black. The only way i have to go to console is pressing CTRL+ALT+F1 after lid close, suspend and resume. Just wanting to know what is the best way i can help you regarding this. i know sending: 1) dmesg 2) x.org.log Is ok, but i have no idea what else could help. So, please, just let me know what else is needed, so i can do my homework. (Also i tried snapshot from 12/08 but an libc version problem appears when x starts) Regards, Leonardo Santagostini http://ar.linkedin.com/in/santagostini Hello Leonardo, have you done fw_update -v ? Hard to say if it's needed since you didn't include the dmesg. -- Regards, Ville Valkonen
OpenBSD 5.6 - amd64 on Lenovo G480
Hello @misc, This mail is regarding about issues that im facing after doing a fresh install of 5.6 RELEASE and snapshot on my latptop The point is that after installing sucessfully i am trying to start X but screen goes black. The only way i have to go to console is pressing CTRL+ALT+F1 after lid close, suspend and resume. Just wanting to know what is the best way i can help you regarding this. i know sending: 1) dmesg 2) x.org.log Is ok, but i have no idea what else could help. So, please, just let me know what else is needed, so i can do my homework. (Also i tried snapshot from 12/08 but an libc version problem appears when x starts) Regards, Leonardo Santagostini http://ar.linkedin.com/in/santagostini
Re: OpenBSD 5.6 - amd64 on Lenovo G480
On 12.12.2014 02:50, Leonardo Santagostini wrote: Hello @misc, This mail is regarding about issues that im facing after doing a fresh install of 5.6 RELEASE and snapshot on my latptop The point is that after installing sucessfully i am trying to start X but screen goes black. The only way i have to go to console is pressing CTRL+ALT+F1 after lid close, suspend and resume. Just wanting to know what is the best way i can help you regarding this. i know sending: 1) dmesg 2) x.org.log Is ok, but i have no idea what else could help. Well good that you know it, but where are they? ;-) So, please, just let me know what else is needed, so i can do my homework. Look /var/log/Xorg.0.log for any WW and EE (Also i tried snapshot from 12/08 but an libc version problem appears when x starts) Regards, Leonardo Santagostini http://ar.linkedin.com/in/santagostini
Re: OpenBSD 5.6 - amd64 on Lenovo G480
On 12/12/14 01:50, Leonardo Santagostini wrote: Hello @misc, This mail is regarding about issues that im facing after doing a fresh install of 5.6 RELEASE and snapshot on my latptop The point is that after installing sucessfully i am trying to start X but screen goes black. The only way i have to go to console is pressing CTRL+ALT+F1 after lid close, suspend and resume. Just wanting to know what is the best way i can help you regarding this. i know sending: 1) dmesg 2) x.org.log Is ok, but i have no idea what else could help. So, please, just let me know what else is needed, so i can do my homework. (Also i tried snapshot from 12/08 but an libc version problem appears when x starts) Regards, Leonardo Santagostini http://ar.linkedin.com/in/santagostini When does the screen go black? On startx? I have seen a similar issue on a Toshiba portege - and toggling the internal / external monitor button (Fn+F5 on this machine) brings up X. hth Fred PS dmesg is always useful