Re: Soekris 4501 and OpenBSd 5.7
> On Sep 16, 2015, at 00:40, Markus Rosjatwrote: > > Hi there, > > just a simple question, is it possible to install a 5.7 on a soekris 4501? I don't know about the 4501, but the 5501 works fine. Any chance you grabbed the 64 bit image by mistake? Devin
Re: Soekris 4501 and OpenBSd 5.7
4801 worked fine for me until it died (hardware failure) On Wed, Sep 16, 2015 at 8:35 AM, Devin Readewrote: >> On Sep 16, 2015, at 00:40, Markus Rosjat wrote: >> >> Hi there, >> >> just a simple question, is it possible to install a 5.7 on a soekris 4501? > > I don't know about the 4501, but the 5501 works fine. Any chance you grabbed > the 64 bit image by mistake? > > Devin
Re: Soekris 4501 and OpenBSd 5.7
rosjat wrote: > stuck on the entry point msg. You need to create a boot.conf file with a couple of commands. Read this: http://www.openbsd.org/faq/faq6.html#PXE The contents of the file will likely need to be as follows: stty com0 115200 set tty com0 The default baud rate is 9600 -- so if you're using a rate other than 9600, specify it with the first command. --avj
Re: Soekris 4501 and OpenBSd 5.7
On 2015-09-16, Devin Readewrote: > I don't know about the 4501, but the 5501 works fine. Also, lunch was okay. Since we are talking about totally different things. -- Christian "naddy" Weisgerber na...@mips.inka.de
Re: Soekris 4501 and OpenBSd 5.7
On 2015-09-16, Adam Jeanguenatwrote: > rosjat wrote: >> stuck on the entry point msg. > > You need to create a boot.conf file with a couple of commands. Read > this: > >http://www.openbsd.org/faq/faq6.html#PXE > > The contents of the file will likely need to be as follows: > >stty com0 115200 >set tty com0 > > The default baud rate is 9600 -- so if you're using a rate other than > 9600, specify it with the first command. I think that's what is meant by "I redirected the console", but it would have been better if the OP had included exact commands and the console output. +1 for the amd64 question as that's exactly where that would fail.
Re: Soekris 4501 and OpenBSd 5.7
yeah basically :-P but the hint with the version of the image seems to be the right thing to check. I had the image laying arround since earlier this yeah when I set up a 6501 so this should be a 64bit image and if I remember right 4501 is only capable of 32bit. So I'll give it a try with a 32bit image:) regards Markus Am 16.09.2015 um 18:30 schrieb Christian Weisgerber: On 2015-09-16, Devin Readewrote: I don't know about the 4501, but the 5501 works fine. Also, lunch was okay. Since we are talking about totally different things. -- Markus Rosjatfon: +49 351 8107223mail: ros...@ghweb.de G+H Webservice GbR Gorzolla, Herrmann Königsbrücker Str. 70, 01099 Dresden http://www.ghweb.de fon: +49 351 8107220 fax: +49 351 8107227 Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you print it, think about your responsibility and commitment to the ENVIRONMENT