Re: acpitz diff changes warnings on compaq nc6000 [Re: CVS: cvs.openbsd.org: src]
On Fri, 12 Sep 2008 11:51:40 +0300 Denis Doroshenko [EMAIL PROTECTED] wrote: hi, On Thu, Sep 11, 2008 at 3:45 PM, Miod Vallat [EMAIL PROTECTED] wrote: CVSROOT:/cvs Module name:src Changes by: [EMAIL PROTECTED]2008/09/11 06:45:20 Modified files: sys/dev/acpi : acpitz.c Log message: Thermal Zone entities might not be direct object references, but named references. Account for this, and the hp530 laptop won't spontaneously power down thinking internal temperature is over 500C. ok marco@ in a hope this diff would fix overheating under ACPI on my compaq nc6000, built the kernel and found out that this diff changed acpitz warnings from: acpitz0: _AL1[0] not a object ref acpitz0: _AL2[0] not a object ref acpitz0: _AL3[0] not a object ref to acpitz0: _AL1[0.0] _PRO not a package acpitz0: _AL2[0.0] _PRO not a package acpitz0: _AL3[0.0] _PRO not a package Hi, running the snapshot from the weekend (2008-09-22) on my HP nc6400 doesn't show the above mentioned console output anymore. Getting one step closer to run OpenBSD on the notebook. Thanks. Below the hw.sensors output which looks fine and the dmesg. Sven hw.sensors.acpitz0.temp0=45.05 degC (zone temperature) hw.sensors.acpitz1.temp0=39.05 degC (zone temperature) hw.sensors.acpitz2.temp0=37.05 degC (zone temperature) hw.sensors.acpitz3.temp0=23.85 degC (zone temperature) hw.sensors.acpitz4.temp0=20.05 degC (zone temperature) hw.sensors.acpibat0.volt0=10.80 VDC (voltage) hw.sensors.acpibat0.volt1=12.49 VDC (current voltage) hw.sensors.acpibat0.amphour0=4.43 Ah (last full capacity) hw.sensors.acpibat0.amphour1=0.22 Ah (warning capacity) hw.sensors.acpibat0.amphour2=0.04 Ah (low capacity) hw.sensors.acpibat0.amphour3=3.88 Ah (remaining capacity), OK hw.sensors.acpibat0.raw0=2 (battery charging), OK hw.sensors.acpibat0.raw1=1034 (rate) hw.sensors.acpiac0.indicator0=On (power supply) hw.sensors.cpu0.temp0=43.00 degC OpenBSD 4.4-current (GENERIC.MP) #878: Sat Sep 20 14:12:25 MDT 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Genuine Intel(R) CPU T2400 @ 1.83GHz (GenuineIntel 686-class) 1.83 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR real mem = 3614863360 (3447MB) avail mem = 3508621312 (3346MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/05/07, BIOS32 rev. 0 @ 0xf, SMBIOS rev. 2.4 @ 0xf398f (23 entries) bios0: vendor Hewlett-Packard version 68YCU Ver. F.0B date 09/05/2007 bios0: Hewlett-Packard HP Compaq nc6400 (RA270AA#ABD) acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C098(S5) C0F7(S3) C0F8(S3) C0F9(S3) C0FA(S3) C101(S0) C229(S0) C111(S5) C234(S5) C117(S5) C235(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU T2400 @ 1.83GHz (GenuineIntel 686-class) 1.83 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins ioapic0: duplicate apic id, remapped to apid 2 acpiprt0 at acpi0: bus 2 (C098) acpiprt1 at acpi0: bus 8 (C101) acpiprt2 at acpi0: bus 16 (C111) acpiprt3 at acpi0: bus 32 (C117) acpiprt4 at acpi0: bus 0 (C002) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 256 degC acpitz1 at acpi0: critical temperature 105 degC acpitz2 at acpi0: critical temperature 105 degC acpitz3 at acpi0: critical temperature 105 degC acpitz4 at acpi0: critical temperature 110 degC acpibat0 at acpi0: C1B4 model Primary serial 14908 2007/01/24 type LIon oem Hewlett-Packard acpibat1 at acpi0: C1B3 not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C249 acpibtn1 at acpi0: C241 acpivideo at acpi0 not configured bios0: ROM list: 0xc/0x1! cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130b2c06000b2c cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1833 MHz (1404 mV): speeds: 1833, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 82945GM Host rev 0x03 vga1 at pci0 dev 2 function 0 Intel 82945GM Video rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xe000, size 0x1000 Intel 82945GM Video rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x01: apic 2 int 16 (irq 10) azalia0: codec[s]: Analog Devices/0x1981, ATT/Lucent/0x3026, using Analog Devices/0x1981 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel
Re: acpitz diff changes warnings on compaq nc6000 [Re: CVS: cvs.openbsd.org: src]
Markus Bergkvist wrote: I've had the acpitz0: _AL1[0] not a object ref problem with my HP Compaq 6710B too, with -current it seems to be fixed /Markus Not entirely true. Yesterday I got acpitz2: TZ5_: failed to read _TMP acpitz2: TZ5_: failed to read temp once every minute and today it spontaneously powered down directly after boot acpitz1: Critical temperature, shutting down After that, I've seen nothing from acpitz. /Markus $ sysctl hw.sensors hw.sensors.cpu0.temp0=44.00 degC hw.sensors.cpu1.temp0=44.00 degC hw.sensors.acpitz0.temp0=40.05 degC (zone temperature) hw.sensors.acpitz1.temp0=23.75 degC (zone temperature) hw.sensors.acpitz2.temp0=20.05 degC (zone temperature) hw.sensors.acpitz3.temp0=36.05 degC (zone temperature) hw.sensors.acpitz4.temp0=46.05 degC (zone temperature) hw.sensors.acpibat0.volt0=12.43 VDC (voltage) hw.sensors.acpibat0.volt1=31.63 VDC (current voltage) hw.sensors.acpibat0.amphour0=39.06 Ah (last full capacity) hw.sensors.acpibat0.amphour1=1.95 Ah (warning capacity) hw.sensors.acpibat0.amphour2=0.39 Ah (low capacity) hw.sensors.acpibat0.amphour3=52.88 Ah (remaining capacity), OK hw.sensors.acpibat0.raw0=0 (battery full), OK hw.sensors.acpibat0.raw1=144 (rate) hw.sensors.acpiac0.indicator0=Off (power supply) OpenBSD 4.4-current (GENERIC.MP) #29: Sun Sep 14 18:59:41 CEST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2125410304 (2026MB) avail mem = 2063753216 (1968MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2a6d (25 entries) bios0: vendor Hewlett-Packard version 68DDU Ver. F.10 date 01/11/2008 bios0: Hewlett-Packard HP Compaq 6710b (GR679ET#AK8) acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C0B0(S5) C108(S3) C10F(S3) C110(S3) C111(S3) C119(S3) C11A(S3) C11B(S3) C131(S5) C2A1(S5) C132(S5) C137(S5) C134(S5) C2A2(S5) C23D(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.38 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 2 (C0B0) acpiprt1 at acpi0: bus 8 (C11D) acpiprt2 at acpi0: bus 16 (C131) acpiprt3 at acpi0: bus 24 (C132) acpiprt4 at acpi0: bus 40 (C134) acpiprt5 at acpi0: bus 0 (C003) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 108 degC acpitz2 at acpi0: critical temperature 110 degC acpitz3 at acpi0: critical temperature 256 degC acpitz4 at acpi0: critical temperature 108 degC acpibat0 at acpi0: C23B model Primary serial 20667 2007/08/17 type LIon oem Hewlett-Packard acpibat1 at acpi0: C23A not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C2BF acpibtn1 at acpi0: C153 acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120a2506000a25 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 2000 MHz (1292 mV): speeds: 2000, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel GM965 Host rev 0x0c vga1 at pci0 dev 2 function 0 Intel GM965 Video rev 0x0c wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd000, size 0x1000 Intel GM965 Video rev 0x0c at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 Intel 82801H USB rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 Intel 82801H USB rev 0x03: apic 1 int 17 (irq 10) ehci0 at pci0 dev 26 function 7 Intel 82801H USB rev 0x03: apic 1 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 82801H HD Audio rev 0x03: apic 1 int 16 (irq 10) azalia0: codec[s]: Analog Devices/0x1981, ATT/Lucent/0x1040, using Analog Devices/0x1981 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801H PCIE rev 0x03 pci1 at ppb0 bus 8 ppb1 at pci0 dev 28 function 1 Intel 82801H PCIE rev 0x03: apic 1 int 17 (irq 10) pci2 at ppb1 bus 16 wpi0 at pci2 dev 0 function 0 Intel PRO/Wireless 3945ABG rev 0x02: apic 1 int 17 (irq 10), MoW2, address 00:1b:77:c7:4a:bc ppb2 at pci0 dev
Re: acpitz diff changes warnings on compaq nc6000 [Re: CVS: cvs.openbsd.org: src]
I've had the acpitz0: _AL1[0] not a object ref problem with my HP Compaq 6710B too, with -current it seems to be fixed /Markus OpenBSD 4.4-current (GENERIC.MP) #29: Sun Sep 14 18:59:41 CEST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2125410304 (2026MB) avail mem = 2063753216 (1968MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2a6d (25 entries) bios0: vendor Hewlett-Packard version 68DDU Ver. F.10 date 01/11/2008 bios0: Hewlett-Packard HP Compaq 6710b (GR679ET#AK8) acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C0B0(S5) C108(S3) C10F(S3) C110(S3) C111(S3) C119(S3) C11A(S3) C11B(S3) C131(S5) C2A1(S5) C132(S5) C137(S5) C134(S5) C2A2(S5) C23D(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.38 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, 1995.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 2 (C0B0) acpiprt1 at acpi0: bus 8 (C11D) acpiprt2 at acpi0: bus 16 (C131) acpiprt3 at acpi0: bus 24 (C132) acpiprt4 at acpi0: bus 40 (C134) acpiprt5 at acpi0: bus 0 (C003) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 108 degC acpitz2 at acpi0: critical temperature 110 degC acpitz3 at acpi0: critical temperature 256 degC acpitz4 at acpi0: critical temperature 108 degC acpibat0 at acpi0: C23B model Primary serial 20667 2007/08/17 type LIon oem Hewlett-Packard acpibat1 at acpi0: C23A not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C2BF acpibtn1 at acpi0: C153 acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120a2506000a25 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 2000 MHz (1292 mV): speeds: 2000, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel GM965 Host rev 0x0c vga1 at pci0 dev 2 function 0 Intel GM965 Video rev 0x0c wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd000, size 0x1000 Intel GM965 Video rev 0x0c at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 Intel 82801H USB rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 Intel 82801H USB rev 0x03: apic 1 int 17 (irq 10) ehci0 at pci0 dev 26 function 7 Intel 82801H USB rev 0x03: apic 1 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 82801H HD Audio rev 0x03: apic 1 int 16 (irq 10) azalia0: codec[s]: Analog Devices/0x1981, ATT/Lucent/0x1040, using Analog Devices/0x1981 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801H PCIE rev 0x03 pci1 at ppb0 bus 8 ppb1 at pci0 dev 28 function 1 Intel 82801H PCIE rev 0x03: apic 1 int 17 (irq 10) pci2 at ppb1 bus 16 wpi0 at pci2 dev 0 function 0 Intel PRO/Wireless 3945ABG rev 0x02: apic 1 int 17 (irq 10), MoW2, address 00:1b:77:c7:4a:bc ppb2 at pci0 dev 28 function 2 Intel 82801H PCIE rev 0x03: apic 1 int 18 (irq 11) pci3 at ppb2 bus 24 bge0 at pci3 dev 0 function 0 Broadcom BCM5787M rev 0x02, BCM5754/5787 A2 (0xb002): apic 1 int 18 (irq 11), address 00:1a:4b:69:c0:69 brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 4 Intel 82801H PCIE rev 0x03: apic 1 int 16 (irq 10) pci4 at ppb3 bus 40 uhci2 at pci0 dev 29 function 0 Intel 82801H USB rev 0x03: apic 1 int 20 (irq 10) uhci3 at pci0 dev 29 function 1 Intel 82801H USB rev 0x03: apic 1 int 21 (irq 10) uhci4 at pci0 dev 29 function 2 Intel 82801H USB rev 0x03: apic 1 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 Intel 82801H USB rev 0x03: apic 1 int 20 (irq 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xf3 pci5 at ppb4 bus 2 cbb0 at pci5 dev 4 function 0 Ricoh 5C476 CardBus rev 0xb6: apic 1 int 16 (irq 5) Ricoh 5C832 Firewire rev 0x02 at pci5 dev 4 function 1 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer
acpitz diff changes warnings on compaq nc6000 [Re: CVS: cvs.openbsd.org: src]
hi, On Thu, Sep 11, 2008 at 3:45 PM, Miod Vallat [EMAIL PROTECTED] wrote: CVSROOT:/cvs Module name:src Changes by: [EMAIL PROTECTED]2008/09/11 06:45:20 Modified files: sys/dev/acpi : acpitz.c Log message: Thermal Zone entities might not be direct object references, but named references. Account for this, and the hp530 laptop won't spontaneously power down thinking internal temperature is over 500C. ok marco@ in a hope this diff would fix overheating under ACPI on my compaq nc6000, built the kernel and found out that this diff changed acpitz warnings from: acpitz0: _AL1[0] not a object ref acpitz0: _AL2[0] not a object ref acpitz0: _AL3[0] not a object ref to acpitz0: _AL1[0.0] _PRO not a package acpitz0: _AL2[0.0] _PRO not a package acpitz0: _AL3[0.0] _PRO not a package dmesg with the diff: OpenBSD 4.4-current (GENERIC) #0: Fri Sep 12 10:08:08 EEST 2008 [EMAIL PROTECTED]:/data/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1600MHz (GenuineIntel 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 real mem = 536244224 (511MB) avail mem = 510070784 (486MB) User Kernel Config UKC disable apm 330 apm0 disabled UKC exit Continuing... mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/30/06, BIOS32 rev. 0 @ 0xf, SMBIOS rev. 2.3 @ 0xfa1ee (31 entries) bios0: vendor Hewlett-Packard version 68BDD Ver. F.15 date 08/30/2006 bios0: Hewlett-Packard HP Compaq nc6000 (DJ256A#ABB) apm at bios0 function 0x15 not configured acpi0 at bios0: rev 0 acpi0: tables DSDT FACP SSDT acpi0: wakeup devices C056(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 1 (C045) acpiprt1 at acpi0: bus 2 (C056) acpiprt2 at acpi0: bus 0 (C044) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, FVS, 1600, 1400, 1200, 1000, 800, 600 MHz acpitz0 at acpi0: critical temperature 103 degC acpitz1 at acpi0: critical temperature 115 degC acpitz2 at acpi0: critical temperature 103 degC acpibat0 at acpi0: C137 model Primary serial 07280 2004/04/16 type LIon oem Hewlett-Packard acpibat1 at acpi0: C136 not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C139 acpibtn1 at acpi0: C138 acpivideo at acpi0 not configured bios0: ROM list: 0xc/0x1 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 82855PM Host rev 0x03 ppb0 at pci0 dev 1 function 0 Intel 82855PM AGP rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 ATI Radeon Mobility M10 NP rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xb000, size 0x1000 uhci0 at pci0 dev 29 function 0 Intel 82801DB USB rev 0x03: irq 10 uhci1 at pci0 dev 29 function 1 Intel 82801DB USB rev 0x03: irq 10 uhci2 at pci0 dev 29 function 2 Intel 82801DB USB rev 0x03: irq 10 ehci0 at pci0 dev 29 function 7 Intel 82801DB USB rev 0x03: irq 10 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0x83 pci2 at ppb1 bus 2 ath0 at pci2 dev 4 function 0 Atheros AR5212 rev 0x01: irq 11 ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address 00:0b:cd:5b:e0:32 cbb0 at pci2 dev 6 function 0 O2 Micro OZ711E0 CardBus rev 0x00: irq 10 cbb1 at pci2 dev 6 function 1 O2 Micro OZ711E0 CardBus rev 0x00: irq 10 O2 Micro OZ711Mx Misc rev 0x00 at pci2 dev 6 function 2 not configured cbb2 at pci2 dev 6 function 3 O2 Micro OZ711E0 CardBus rev 0x00: irq 10 bge0 at pci2 dev 14 function 0 Broadcom BCM5705M Alt rev 0x03, BCM5705 A3 (0x3003): irq 11, address 00:14:38:1b:a7:61 brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20 pcmcia1 at cardslot1 cardslot2 at cbb2 slot 2 flags 0 cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20 pcmcia2 at cardslot2 ichpcib0 at pci0 dev 31 function 0 Intel 82801DBM LPC rev 0x03 pciide0 at pci0 dev 31 function 1 Intel 82801DBM IDE rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configu red to compatibility wd0 at pciide0 channel 0 drive 0: HTS726060M9AT00 wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: TOSHIBA, DVD-ROM SD-R2512, 1A04 ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 auich0 at pci0 dev 31 function 5 Intel 82801DB AC97 rev 0x03: irq 11, ICH4 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 Intel 82801DB Modem rev 0x03
Re: acpitz diff changes warnings on compaq nc6000 [Re: CVS: cvs.openbsd.org: src]
It does and yay for miod for picking this up. This was way long on my list. On Fri, Sep 12, 2008 at 11:51:40AM +0300, Denis Doroshenko wrote: hi, On Thu, Sep 11, 2008 at 3:45 PM, Miod Vallat [EMAIL PROTECTED] wrote: CVSROOT:/cvs Module name:src Changes by: [EMAIL PROTECTED]2008/09/11 06:45:20 Modified files: sys/dev/acpi : acpitz.c Log message: Thermal Zone entities might not be direct object references, but named references. Account for this, and the hp530 laptop won't spontaneously power down thinking internal temperature is over 500C. ok marco@ in a hope this diff would fix overheating under ACPI on my compaq nc6000, built the kernel and found out that this diff changed acpitz warnings from: acpitz0: _AL1[0] not a object ref acpitz0: _AL2[0] not a object ref acpitz0: _AL3[0] not a object ref to acpitz0: _AL1[0.0] _PRO not a package acpitz0: _AL2[0.0] _PRO not a package acpitz0: _AL3[0.0] _PRO not a package dmesg with the diff: OpenBSD 4.4-current (GENERIC) #0: Fri Sep 12 10:08:08 EEST 2008 [EMAIL PROTECTED]:/data/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1600MHz (GenuineIntel 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 real mem = 536244224 (511MB) avail mem = 510070784 (486MB) User Kernel Config UKC disable apm 330 apm0 disabled UKC exit Continuing... mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/30/06, BIOS32 rev. 0 @ 0xf, SMBIOS rev. 2.3 @ 0xfa1ee (31 entries) bios0: vendor Hewlett-Packard version 68BDD Ver. F.15 date 08/30/2006 bios0: Hewlett-Packard HP Compaq nc6000 (DJ256A#ABB) apm at bios0 function 0x15 not configured acpi0 at bios0: rev 0 acpi0: tables DSDT FACP SSDT acpi0: wakeup devices C056(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 1 (C045) acpiprt1 at acpi0: bus 2 (C056) acpiprt2 at acpi0: bus 0 (C044) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, FVS, 1600, 1400, 1200, 1000, 800, 600 MHz acpitz0 at acpi0: critical temperature 103 degC acpitz1 at acpi0: critical temperature 115 degC acpitz2 at acpi0: critical temperature 103 degC acpibat0 at acpi0: C137 model Primary serial 07280 2004/04/16 type LIon oem Hewlett-Packard acpibat1 at acpi0: C136 not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C139 acpibtn1 at acpi0: C138 acpivideo at acpi0 not configured bios0: ROM list: 0xc/0x1 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel 82855PM Host rev 0x03 ppb0 at pci0 dev 1 function 0 Intel 82855PM AGP rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 ATI Radeon Mobility M10 NP rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xb000, size 0x1000 uhci0 at pci0 dev 29 function 0 Intel 82801DB USB rev 0x03: irq 10 uhci1 at pci0 dev 29 function 1 Intel 82801DB USB rev 0x03: irq 10 uhci2 at pci0 dev 29 function 2 Intel 82801DB USB rev 0x03: irq 10 ehci0 at pci0 dev 29 function 7 Intel 82801DB USB rev 0x03: irq 10 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0x83 pci2 at ppb1 bus 2 ath0 at pci2 dev 4 function 0 Atheros AR5212 rev 0x01: irq 11 ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address 00:0b:cd:5b:e0:32 cbb0 at pci2 dev 6 function 0 O2 Micro OZ711E0 CardBus rev 0x00: irq 10 cbb1 at pci2 dev 6 function 1 O2 Micro OZ711E0 CardBus rev 0x00: irq 10 O2 Micro OZ711Mx Misc rev 0x00 at pci2 dev 6 function 2 not configured cbb2 at pci2 dev 6 function 3 O2 Micro OZ711E0 CardBus rev 0x00: irq 10 bge0 at pci2 dev 14 function 0 Broadcom BCM5705M Alt rev 0x03, BCM5705 A3 (0x3003): irq 11, address 00:14:38:1b:a7:61 brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20 pcmcia1 at cardslot1 cardslot2 at cbb2 slot 2 flags 0 cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20 pcmcia2 at cardslot2 ichpcib0 at pci0 dev 31 function 0 Intel 82801DBM LPC rev 0x03 pciide0 at pci0 dev 31 function 1 Intel 82801DBM IDE rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configu red to compatibility wd0 at pciide0 channel 0 drive 0: HTS726060M9AT00 wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: TOSHIBA, DVD-ROM SD-R2512, 1A04 ATAPI 5/cdrom removable
Re: acpitz diff changes warnings on compaq nc6000 [Re: CVS: cvs.openbsd.org: src]
On Fri, Sep 12, 2008 at 11:51:40AM +0300, Denis Doroshenko wrote: in a hope this diff would fix overheating under ACPI on my compaq nc6000, built the kernel and found out that this diff changed acpitz warnings from: acpitz0: _AL1[0] not a object ref acpitz0: _AL2[0] not a object ref acpitz0: _AL3[0] not a object ref to acpitz0: _AL1[0.0] _PRO not a package acpitz0: _AL2[0.0] _PRO not a package acpitz0: _AL3[0.0] _PRO not a package Same effect here. OpenBSD 4.4-current (GENERIC.MP) #29: Fri Sep 12 13:31:52 CEST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 1051783168 (1003MB) avail mem = 1020948480 (973MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2a9f (25 entries) bios0: vendor Hewlett-Packard version 68DDU Ver. F.12 date 05/22/2008 bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD) acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C0B0(S5) C108(S3) C10F(S3) C110(S3) C111(S3) C119(S3) C11A(S3) C11B(S3) C131(S5) C2A1(S5) C132(S0) C137(S0) C134(S5) C2A2(S5) C23D(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.84 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.50 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 2 (C0B0) acpiprt1 at acpi0: bus 8 (C11D) acpiprt2 at acpi0: bus 16 (C131) acpiprt3 at acpi0: bus 24 (C132) acpiprt4 at acpi0: bus 40 (C134) acpiprt5 at acpi0: bus 0 (C003) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 108 degC acpitz2 at acpi0: critical temperature 110 degC acpitz3 at acpi0: critical temperature 256 degC acpitz4 at acpi0: critical temperature 108 degC acpibat0 at acpi0: C23B model Primary serial 43469 2007/04/27 type LIon oem Hewlett-Packard acpibat1 at acpi0: C23A not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C2BF acpibtn1 at acpi0: C153 acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617092506000925 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1800 MHz (1292 mV): speeds: 1800, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel GM965 Host rev 0x0c vga1 at pci0 dev 2 function 0 Intel GM965 Video rev 0x0c wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd000, size 0x1000 Intel GM965 Video rev 0x0c at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 Intel 82801H USB rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 Intel 82801H USB rev 0x03: apic 1 int 17 (irq 10) ehci0 at pci0 dev 26 function 7 Intel 82801H USB rev 0x03: apic 1 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 82801H HD Audio rev 0x03: apic 1 int 16 (irq 10) azalia0: codec[s]: Analog Devices/0x1981, ATT/Lucent/0x1040, using Analog Devices/0x1981 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801H PCIE rev 0x03 pci1 at ppb0 bus 8 ppb1 at pci0 dev 28 function 1 Intel 82801H PCIE rev 0x03: apic 1 int 17 (irq 10) pci2 at ppb1 bus 16 wpi0 at pci2 dev 0 function 0 Intel PRO/Wireless 3945ABG rev 0x02: apic 1 int 17 (irq 10), MoW2, address 00:1b:77:16:56:9a ppb2 at pci0 dev 28 function 2 Intel 82801H PCIE rev 0x03: apic 1 int 18 (irq 11) pci3 at ppb2 bus 24 bge0 at pci3 dev 0 function 0 Broadcom BCM5787M rev 0x02, BCM5754/5787 A2 (0xb002): apic 1 int 18 (irq 11), address 00:17:a4:e8:2a:06 brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 4 Intel 82801H PCIE rev 0x03: apic 1 int 16 (irq 10) pci4 at ppb3 bus 40 uhci2 at pci0 dev 29 function 0 Intel 82801H USB rev 0x03: apic 1 int 20 (irq 10) uhci3 at pci0 dev 29 function 1 Intel 82801H USB rev 0x03: apic 1 int 21 (irq 10) uhci4 at pci0 dev 29 function 2 Intel 82801H USB rev 0x03: apic 1 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 Intel 82801H USB rev 0x03: apic 1 int 20 (irq 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb4 at
Re: acpitz diff changes warnings on compaq nc6000 [Re: CVS: cvs.openbsd.org: src]
Miod@ had a diff for that and i tried it, it fixes the warnings and heat control completely. now i hear fan changing rotation speed according to system load and temperature values in the different TZ seem to be held within appropriate range. As far as i can tell, Miod already submitted the diff to the -current. Check out, rebuild the kernel and try it :-) 2008/9/12 Rafal Brodewicz [EMAIL PROTECTED]: On Fri, Sep 12, 2008 at 11:51:40AM +0300, Denis Doroshenko wrote: in a hope this diff would fix overheating under ACPI on my compaq nc6000, built the kernel and found out that this diff changed acpitz warnings from: acpitz0: _AL1[0] not a object ref acpitz0: _AL2[0] not a object ref acpitz0: _AL3[0] not a object ref to acpitz0: _AL1[0.0] _PRO not a package acpitz0: _AL2[0.0] _PRO not a package acpitz0: _AL3[0.0] _PRO not a package Same effect here. OpenBSD 4.4-current (GENERIC.MP) #29: Fri Sep 12 13:31:52 CEST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 1051783168 (1003MB) avail mem = 1020948480 (973MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf2a9f (25 entries) bios0: vendor Hewlett-Packard version 68DDU Ver. F.12 date 05/22/2008 bios0: Hewlett-Packard HP Compaq 6510b (GB866EA#AKD) acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices C0B0(S5) C108(S3) C10F(S3) C110(S3) C111(S3) C119(S3) C11A(S3) C11B(S3) C131(S5) C2A1(S5) C132(S0) C137(S0) C134(S5) C2A2(S5) C23D(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.84 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz, 1795.50 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 2 (C0B0) acpiprt1 at acpi0: bus 8 (C11D) acpiprt2 at acpi0: bus 16 (C131) acpiprt3 at acpi0: bus 24 (C132) acpiprt4 at acpi0: bus 40 (C134) acpiprt5 at acpi0: bus 0 (C003) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 108 degC acpitz2 at acpi0: critical temperature 110 degC acpitz3 at acpi0: critical temperature 256 degC acpitz4 at acpi0: critical temperature 108 degC acpibat0 at acpi0: C23B model Primary serial 43469 2007/04/27 type LIon oem Hewlett-Packard acpibat1 at acpi0: C23A not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C2BF acpibtn1 at acpi0: C153 acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617092506000925 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 1800 MHz (1292 mV): speeds: 1800, 1200 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel GM965 Host rev 0x0c vga1 at pci0 dev 2 function 0 Intel GM965 Video rev 0x0c wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) agp0 at vga1: aperture at 0xd000, size 0x1000 Intel GM965 Video rev 0x0c at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 Intel 82801H USB rev 0x03: apic 1 int 16 (irq 10) uhci1 at pci0 dev 26 function 1 Intel 82801H USB rev 0x03: apic 1 int 17 (irq 10) ehci0 at pci0 dev 26 function 7 Intel 82801H USB rev 0x03: apic 1 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 82801H HD Audio rev 0x03: apic 1 int 16 (irq 10) azalia0: codec[s]: Analog Devices/0x1981, ATT/Lucent/0x1040, using Analog Devices/0x1981 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801H PCIE rev 0x03 pci1 at ppb0 bus 8 ppb1 at pci0 dev 28 function 1 Intel 82801H PCIE rev 0x03: apic 1 int 17 (irq 10) pci2 at ppb1 bus 16 wpi0 at pci2 dev 0 function 0 Intel PRO/Wireless 3945ABG rev 0x02: apic 1 int 17 (irq 10), MoW2, address 00:1b:77:16:56:9a ppb2 at pci0 dev 28 function 2 Intel 82801H PCIE rev 0x03: apic 1 int 18 (irq 11) pci3 at ppb2 bus 24 bge0 at pci3 dev 0 function 0 Broadcom BCM5787M rev 0x02, BCM5754/5787 A2 (0xb002): apic 1 int 18 (irq 11), address 00:17:a4:e8:2a:06 brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 4 Intel